OTL Error - Hrs - Element link does not exist for the duration of the entry
Hi,
We had a few new people start just before xmas however when the person entering their record did it, they didn't date-track the additional assignment time information record to the start of the week (they did however correctly date-track their employee and assignment record) so when the timecard was filled in errors were thrown up.
Since then I have gone back into the employees assignment time record, purged it and then re-created it effective from the week beginning.
However when we try to enter time for them now using delegated self service, the following error is shown for the two days which were originally excluded from the date-tracked record:
Hrs - Element link does not exist for the duration of the entry Cause: The link has been purged or date effectively deleted. Action: Check the effective start and end dates on the link definitions for this element. The original record should have been created from the 19th dec 2009 however was done from the 23rd by accident. I have since been in and replaced it with a record effective from the 19th.
I have re-run the security list generation (we are using static list).
The only thing I can find on metalink is 372086.1 which doesn't really describe the problem or help!!
The people don't appear in the timekeeper form though which is strange. I really can't see any reason why their record isn't valid - no data is missing. Do I need to run a job to update the information or something?
We are using 11.5.10.2
Thankss
Well would you believe it!? After much late night meddling around, I noticed one employee worked! There was absolutely no difference in any settings between his record and a persons who did not work. So I went into another employees record, changed his name and saved (correcting). Tried again and he worked fine! So, just by changing the employee name it seems to have worked for self service! I still cannot see them in timekeeper which is worrying however at least we can get time in for them now!
If anyone knows why I may not be able to see them in timekeeper (even using an un-secured responsibility) then that would be a great help! :)
Similar Messages
-
API error: Element link does not exist for the duration of the entry
I am trying to create an element using the API_PAY_ELEMENT_ENTRY.CREATE_ELEMENT_ENTRY API
While I am able to create many elements for years this way, for one particular non-recurring element I get the following error
ORA-20001: Element link does not exist for the duration of the entry
Cause: The link has been purged or date effectively deleted.
Action: Check the effective start and end dates on the link definitions for this element.
I have checked evertything and the Link is defined far before my element entry starts and with no end date. The assignment I want to attach this element entry is perfectly eligible.
The weirdest is that I am able to create this element entry with the values I want and the dates I want through standard User interface...
Any idea?
Message was edited by:
briardHere are the parameters I use in my call.
DECLARE
L_EFFECTIVE_START_DATE DATE;
L_EFFECTIVE_END_DATE DATE;
L_ELEMENT_ENTRY_ID NUMBER;
L_OBJECT_VERSION_NUMBER NUMBER;
L_WARNING BOOLEAN;
BEGIN
APPS.PAY_ELEMENT_ENTRY_API.CREATE_ELEMENT_ENTRY(
P_EFFECTIVE_DATE => TO_DATE('01-JUL-2008','DD-MON-YYYY'),
P_BUSINESS_GROUP_ID => 1,
P_ASSIGNMENT_ID => 122147
P_ELEMENT_LINK_ID => 233,
P_ENTRY_TYPE => 'E',
P_INPUT_VALUE_ID1 => 313,
P_ENTRY_VALUE1 => 'T',
P_INPUT_VALUE_ID2 => 314,
P_ENTRY_VALUE2 => '5',
-- out params
P_EFFECTIVE_START_DATE => L_EFFECTIVE_START_DATE,
P_EFFECTIVE_END_DATE => L_EFFECTIVE_END_DATE,
P_ELEMENT_ENTRY_ID => L_ELEMENT_ENTRY_ID,
P_OBJECT_VERSION_NUMBER => L_OBJECT_VERSION_NUMBER,
P_CREATE_WARNING => L_WARNING);
END;
François -
Error message "Location XYZ does not exist for item1" Message no. BBP_PD047
Hi all,
When i do confirmation for PO in SRM, the system gives error message "Location XYZ does not exist for item1" when i enter Location for the plant thought the Location is mapped to Plant in ECC system. System shows error when i click on check button, it allowing me add locations.
This is happening when confirming the PO line items having differernt plants and it is not happeing all the time, sometimes it does't work. I
f all the line items have same Plants, there is no issue.
I am not able to understand why it is working some time and not working other time.(message no: BBP_PD047 in SLG1)
can some one help me in understanding this?
Thanks,
RaviIs this thread still valid? If not, please close the thread.
If so, as no response has been submitted, please rephrase your question and/or provide further information to describe your requirement.
Thanks
Jason
SDN SRM Moderator Team -
ALV Filter Selection w/ error "WBS element 0000000000000000 does not exist"
Hello,
In a few ALV reports, we have WBS Element column showed in ALV list and WBS Element defined as type BSEG-PROJK, which has conversion routine ABPSP.
When WBS Element is used for ALV list Filter, in Selection screen, error message "WBS element 0000000000000000 does not exist" is pop up as we hit Enter key or click on u201CSelection optionsu201D button with no value entered in Input fields.
We get same error even after we enter an existing WBS Element in Low selection input field and hit Enter key.
Itu2019s ok if we enter existing WBS Element value in both Low and High selection input fields.
We know we have workaround by entering both Low and High input field, and we can fix ALV reports by using character based WBS Element, such as PRPS-POSKI.
BUT, as users told me, they donu2019t have this problem before and it just happened. We checked the recent Transports and couldnu2019t see anything relevant.
Could any of you let me know if you have any clue or if thereu2019s any other way to fix it besides changing report by report.
Thank you.
SLHello,
In a few ALV reports, we have WBS Element column showed in ALV list and WBS Element defined as type BSEG-PROJK, which has conversion routine ABPSP.
When WBS Element is used for ALV list Filter, in Selection screen, error message "WBS element 0000000000000000 does not exist" is pop up as we hit Enter key or click on u201CSelection optionsu201D button with no value entered in Input fields.
We get same error even after we enter an existing WBS Element in Low selection input field and hit Enter key.
Itu2019s ok if we enter existing WBS Element value in both Low and High selection input fields.
We know we have workaround by entering both Low and High input field, and we can fix ALV reports by using character based WBS Element, such as PRPS-POSKI.
BUT, as users told me, they donu2019t have this problem before and it just happened. We checked the recent Transports and couldnu2019t see anything relevant.
Could any of you let me know if you have any clue or if thereu2019s any other way to fix it besides changing report by report.
Thank you.
SL -
Loan Error : Tax code .. does not exist for jurisdiction code
Dear experts,
Please help me for below issue.
I have created a loan (using FN1V) in loan management. in this loan i have maintained and interest condition. in this interest condition i have maintained tax code - IV. After that when i try to post an interest entry using t.code - FN8D, It is showing me an error as below.
Tax code IV does not exist for jurisdiction code
Message no. FF718
Diagnosis
You have entered tax codes and jurisdiction codes in the G/L account
items. The amounts of these items are used as the tax base to check the
tax amounts you have entered or to determine the taxes. The system has
now determined that one or more of the "tax code / jurisdiction code"
combinations do not exist in Customizing.
System Response
Calculation of the taxes or checking of the taxes entered had to be
terminated.Procedure
Check the tax codes and the jurisdiction codes in the G/L account items
or asset items. If these are correct, inform your system administrator.
Procedure for System Administration
Change the tax jurisdictions you specified in Customizing under
Financial Accounting -> Financial Accounting Global settings -> Tax on
Sales/Purchases -> Basic Settings -> Define Tax Jurisdictions.
To do this, choose Maintain entries (F5).
Please help
Regards
Gaurav GuptaHI Gaurav,
so what do you have in Customizing under Financial Accounting -> Financial Accounting Global settings -> Tax on Sales/Purchases -> Basic Settings -> Define Tax Jurisdictions ?
BR, Tomislav -
Container element 'ADDRESSSTRINGS' does not exists
Dear all,
I am trying to define expression for recipient type
it gives me error
container element 'ADDRESSSTRINGS' does not exists
container element 'EXPRESS' does not exists
container element 'TYPEID' does not exists
Can you please share the technical detail of these parameters
or is there some other problem
Best of regards,
GauravHi Gaurav,
These are the standard task container's for the send mail step type.
No need create these container's and already they are available in the Task container.
Have you used the standard task to send the mail? If so just double click the Task ID and you can find these container's under the Container Tab.
Just delete the send mail step and create a new one. It will solve the issue.
Thanks,
Viji. -
Container element 'NODEOBJECT' does not exist
Dear Gurrus,
While creating clarification case category i am having this error "Container element 'NODEOBJECT' does not exist" .
kindly help me out in resolving these issue.
Regards,Hi,
I think you need to check Note 1082707 - Error message 'Container element ... does not exist'
Symptom
You have created a container element manually in a case category and you are trying to define the dataflow but in the binding editor you are receiving error message SWF_EXP_001 035 'Container element ... does not exist'.
Other terms
FP-EMMA, BPEM, EMMACCAT2
Reason and Prerequisites
The problem only occurs if you create an invalid container element that contains one or more spaces in the element name.
Solution
Choose a valid element name that starts with a letter and contains only characters, numbers, or underscores. The following correction does insure this.
See the full note if it can be of help.
regards,
David -
Custom segment does not exist for message type Debmas_cfs
Hi,
I have created a custom segment YEXTRA for basic type DEBMAS06.
I have done the configuration in We82 and We20.
I have implemented the segment in User Exit "EXIT_SAPLVV01_001". Now when I am executing the TCODE BD12 then it is creating the Idoc with custom segment. But when I apply the filter on sales org in BD64 then it starts giving me error that " Segment Y**** does not exist for message type DEBMAS_CFS.
Kindly suggest if I need to do some other configuration also.
Thanks.
Regards,
SAurabhHi Gearge,
To add custom segments, you should create an extension.
the TCODE is we30.
Refer this link:
http://help.sap.com/saphelp_erp2005/helpdata/en/dc/6b7d6243d711d1893e0000e8323c4f/frameset.htm
Regards,
Ravi -
Tax code V0 does not exist for jurisdiction code IN00 Message no. FF718
Hi,
i have configured as per suggestion in message as well as assign Jurisidiction code in taxcode in FTXP, but when i try to create PO with tax code V0 and jurisdiction code IN00 then we are facing error "Tax code V0 does not exist for jurisdiction code IN00 Message no. FF718"
please advice me and help to resolve this issue is any config missing pls guide me.
Thanks
Best regards
Shital DPlease check this answered link:
Juristiction code - Error: FF718
Cost centre
Edited by: Afshad Irani on Jun 22, 2010 7:05 PM -
Tax code V0 does not exist for jurisdiction code IN00
hi mm
when i am creating a purchase order
After creating the PO
when i go to invoice and enter tax code V0 and jurisdiction code i face the error
Tax code V0 does not exist for jurisdiction code IN00
Message no. FF718
Diagnosis
You have entered tax codes and jurisdiction codes in the G/L account items. The amounts of these items are used as the tax base to check the tax amounts you have entered or to determine the taxes. The system has now determined that one or more of the "tax code / jurisdiction code" combinations do not exist in Customizing.
System Response
Calculation of the taxes or checking of the taxes entered had to be terminated.
Procedure
Check the tax codes and the jurisdiction codes in the G/L account items or asset items. If these are correct, inform your system administrator.
Procedure for System Administration
Change the tax jurisdictions you specified in Customizing under Financial Accounting -> Financial Accounting Global settings -> Tax on Sales/Purchases -> Basic Settings -> Define Tax Jurisdictions
i have dne as per thr need in define Define Tax Jurisdictions
then also i am facing same error
Regards
VinitHi Vinith,
After maintaining the tax jurisdictions maintain/create the tax codes. Pls ensure tht created tax codes having field of jurisdictions code.
You created tax codes after tht you defined tax jurisdiction codes then you will get this kind of errors
Hope its clear still if u hve questions let me know.
reg
Durga
*assign points if the the info is useful -
Tax code I9 does not exist for jurisdiction code SP 3522604
Hi Friends,
At the time of posting a document using t-code FB50, we are encountering an error " Tax code I9 does not exist for jurisdiction code SP 3522604".
Please suggest a solution.
Tks & Rgds,
Rahul JainHi
Please check the following path
F.A(New)
F.A.Global settings(New)
Tax on Sales/Purchases
Basic settings
1.Specify Structure for Tax Jurisdiction Code
2.Define Tax Jurisdictions
Please complete the above two steps, then your Jurisdiction code will be mandatory for the tax code in FTXP.
Rgds
Murali.N -
Tax code EA does not exist for jurisdiction code QC000000
Hi All,
We are getting this error "Tax code EA does not exist for jurisdiction code QC000000".
Can anyone suggest on this ?Hi All,
I am still working on this issue and want to add some information based on my analysis and if at all some could suggest something on that it would be very helpful.
I tried to debug the IDOC which was giving this error and also simultaneously debugged the other IDOC which was successful.
I found that the failed IDOC is giving this error as when SD_COND_ACCESS Fm is called in the satndard code , the failed IDOC scenario doesn't return any values in condition records table for one of the condition types ZIR1.
Where as the successful IDOC returns values for condition records table when FM SD_COND_ACCESS is called for condition type ZIR1.
Any suggestion ??
Thanks !
MK -
Tax code I9 does not exist for jurisdiction code 7700000000
Hi all,
My user is trying to post the trip to finance. While posting she is getting error: Tax code I9 does not exist for jurisdiction code 7700000000. I checked setting of tax code I9 in HR box. Everything looks fine. Can anyone suggest me what are possible reasons behind this error.
Thanks and Regards,
Vikrant Deshpandedoes this results get from cluster
if yes delte the data for that record from cluster
and rerun the simulation and run the posting -
Country implementation 40 does not exist for category IT and type 2001
Dear Experts,
I am getting the following error
"Country implementation 40 does not exist for category IT and type 2001".
when I tried to create a leave request. I think the HR Ess configuration is complete.
Kindly, give your valuable inputs, hence I can try & resolve this issue, as I am stuck with this for quite sometime.
Your inputs will be really valuable.
Thanks
BalaAfter suffering this same problem and not finding any help or information ANYWHERE, I debugged the process and found that the error is caused by a missing entry in view V_BLPTYPECOUNTRY.
I created a new entry in the view with a blank molga and the error goes away.
The entry I added was:
Category = IT
Data Typ = 2001
Ctry Grouping = (blank)
Class = CL_PT_BLP_IT2001
I hope that this can help anyone having the same problem in the future. -
Standard Data Collection Failing with Error ORA-04054: database link does not exist.
Hi Gurus,
When I am running Standard Data Collection in ASCP(APS) instance R12.1.3, its failing with error : ORA-04054: database link does not exist.
There is no such Database link exits which is showing in above error.
Also the database link name in the above error is not profile values in the database.
I think, concurrent might be fetching this database link name from some tables related to plan.
I am not having much knowledge about how this ASCP/APS works.
Need your help to resolve this issue.
Thanks,Hi,
ASCP Collections looks at the dblink from instances definitions from.
1. Responsibility: Advanced Planning Administrator
2. Navigation: Admin > Instances
You may review the note in support.oracle.com - Understanding DB Links Setup for APS Applications - ASCP and ATP Functionality (Doc ID 813231.1)
Maybe you are looking for
-
1. The iPod Nano (4th Generation - 8GB) switches on, only when connected to USB power by showing apple logo and displays Menu options thereafter.. 2. However, I can not access Menu as it is unresponsive to click wheel. As a result it is inaccessible
-
Need Content Conversion parameter help
Hi, I need help regarding the Content conversion parameters.I have sent a IDOC and i could receive it as an XML file in my receiver end. My XML files looks like this <?xml version="1.0" encoding="UTF-8"?> <ns0:MT_IDoc2FILE xmlns:ns0="http://ffven
-
How do i fix "Pages" from giving me "Pages unexpectedly close" message?
When i bought my Macbook pages was working just fine and the other day i tried opening it. It didnt want to open. Can someone Help me??
-
I've attached a logo i have to recreate for a customer. How do i recreate the rings??? i've tried in 3-D in revolve but the ring is always to fat. I can't get it to make it skinnier. Any one know what i'm doing wrong or have a way to fix this????
-
No catalog in Adobe Media Player
Recently my AMP ver. 1.8 opens with empty home page and catalog. No more videos! Is this a problem with my installation or my mac or support for the contents has been discontinued? Someone else experiments this problem? Thank you Raimondo Di Bella