Ountbound delivery with MB1B movement type 311

Hi,
I would like to create an outbound delivery when I make the tcode MB1B movement type 311.
Somebody could tell me where is it in SPRO?
Thank you
Regards
Kari

Dear Kari
I am afraid that the approach suggested is not feasible. As of SAP R/3 4.7, it is indeed possible to carry out stock transfer orders between two storage locations of the same plant but you cannot create the purchase order with transaction MB1B. (The movement type, moreover, would be 641, not 311.)
However, MB1B does create outbound deliveries for transfer postings with movement type 311 if the issuing storage location is either Handling Unit managed or assigned to a decentralized WM.
Best regards,
Christiane

Similar Messages

MB1B movement type 311

Hi every body
I need help about transfer order.
Whan I make a transfert with Tcode MB1B movement type 311, I haven't got transfert order created.
Somebody could help me?
The material stay in the storage type 921.
Thanck you
Kari

Elmka,
There are several things that could stop the Transfer Order from being created. Please check the following:
Is the source bin blocked due to inventory?
Is the material in unrestricted stock?
If you are transfering partial stock from one Sloc to another, and the stock is maintained in multiple warehouose bins, then SAP may not have been able to determine which bin to select. Test this in the WH activity monitor (Tcode LL01) - there should be an open transfer Requirement. Select it and process in the background. If it errors, try processing it in the foreground and manually select the bin and quantity.
If the stock is in one bin or you are transfering the ENTIRE quantity but the TO still wasn't created, check configuration to ensure auto TO is configured (2 places to check):
>IMG: Logistics Execution > Warehouse Management > Activities > Transfers > Define Movement Types
>IMG: Logistics Execution > Warehouse Management > Interfaces > Inventory Management > Define Movement Types >> LE-WM Interface to Inventory Management - - Here you ensure your IM movement type 311 & 312 are assigned to WM movement types 311 & 312 + have Immediate TO creation set to "A" (automatically in the background)

MB1B Movement Type 311 in WM

Hi,
Quick Question, I want to do a movement between SLOCs so I am using MB1B. I have it configured so when I click Save it automatically creates a TO in the foreground which is how i want it.
The Question is that when the TO is created, the Destination BIN is greyed out with a BIN in it. I want the ability to overide the BIN and Storage Type as when I am doing the transfer in the TO i want to say in which Storage type I am moving it to as well as the new BIN.
How can I achieve this?
Let me know.
Thanks
Adeel

HI,
As per SAP WM Standard, when you create a transfer posting document, System will create either a TR or a Posting Change Notice (PCN) based on the settings you have done in IMG - LE - WM - Interfaces - Define Mov.types (IM-WM)
So as per WM logic used of transfer posting, system will first move the stock from your source storage bin to an intermediate bin which you have defined in the mov.type 311 as Destination Storage type & Storage Bin in the LE - WM - Activities - Define Mov.types.
i.e when you do a 311 mov. in IM, System will create either a TR or PCN & will propose the bin & storage type which you have specified in the above settings.
Finally you can convert the TR or PCN into a TO which will move the stock to the desired SL where you want to move the stock & here the Storage type & Bin is determined using Storage type Search.
Now to coming to the solution part, give the Storage type & bin manually when you create a TO against the TR or PCN created for the 311 material doc.
Hope its Clear.
Thanks & Regards,

Outbound deliveries with movement type 311

Hi every body,
My problem is the following :
I need to make a transfert from a storage location to an other storage location in the same plant with an outbound delivery.
I try the tcode MB1B movement type 311, but I have just the creation of a transfert order.
I activate the customizing MM "Set up Stock Transport Order"> Set Up Stock Transfer Between Storage Locations>Activate Stock Transfer Between Storage Locations
But I still have the creation of a transfert order.
Anybody could help me?
Thanks a lot
Regards
Kari

Hello Kari,
To enable stock transport order you have to customize folowing settings Formation in *OSS note 498143.*
1. You must assign a delivery type to the purchase order document type/supplying plant combination. You can do this in the IMG for purchasing under "Purchase Order > Set Up Stock Transport Order > Assign Delivery Type and Checking Rule". NL (Replenishment delivery) is provided for intra-company-code stock transfers and NLCC (Replenishment delivery cross company) for cross-company-code stock transfers.
2. You must assign sales and distribution (SD) organizational units to the supplying plant. They are a sales organization and a
distribution channel. Purchasing > Purchase order > Set up Stock Transport Order > Plant.
3. You must assign a customer master record to the receiving plant. IMG Purchasing > Purchase Order > Set Up Stock
Transport Order > Plant. You require a customer master record for the receiving plant. This customer master record must be
created for the organizational units of the supplying plant
(point 2) (Logistics > Sales and Distribution > Master Data > Business Partners > Customers > Create -> sales and distribution VD01 or total XD01).
For the intra-company-code stock transport (PO DOC TYPE UB), it is sufficent to create the customer master record as a goods recipient (VD01). For the cross-company-code stock transport with shipping and billing documents, a complete cutomer master reccord is required (XD01).
4. For the material to be transferred, you must create the sales organization data for the sales organization/distribution channel
of the supplying plant (point 2), and you must maintain the sales view (general plant data) for the supplying plant.
5. If there is a cross-company-code stock transport, you must create a vendor master record for the purchasing organization of the receiving plant. You must assign the supplying plant to the vendor master record. The assignment is executed in the vendor master record from the purchasing organization screen using "Extras > Additional Purchasing Data".
6. You must enter a shipping point for the combination of shipping condition (from the customer master record of the
ordering plant, see point 3) - loading group (from the material master) - supplying plant, IMG: Logistics Execution > Shipping > Basic Shipping Functions > Shipping Point and Goods Receiving Point Determination > Assign shipping points.
Br,
Tushar

Stock trasfer reservation with movement type 311

Dear APO Experts,
I have plant 1200 and storage location MRP area CA_03 within plant 1200.
When planning, STRs are created and if ciffed to ERP, reservation with movement type 301 is shown.
My question is as follows.
Is it possible to create these reservations in APO with the movement type 311 (sloc to sloc) instead of the movement type 301 (plant to plant).
Thanks in advance for your help.
Regards,
Lee, Seung Won

Hi Lee Seung Won,
To the best of my knowledge it may not work as you are expecting. The basis reason seems to be that SLOC is not treated as SLOC in APO when it is defined as MRP Area. MRP area (SLOC) is treated as Plant (Location) in APO. Hence movement type will be 301 plant to plant & not 311 sloc to sloc
Thanks,
Mangesh A. Kulkarni

Movement type 311 E in WM

Hi gurus,
I am working on product support @clients place where we have MTO items.
Now the scenario is that a material XYZ was Goods Receipted in a wrong storage location (0001) by the Production Order confirmation. This was due to the way it was setup was incorrect.
So to create a Delivery for these items, I had to move the stock from the current location (0001) to another location(0002) in the same plant.
For this I used MB1B - 331 E. This worked fine on the IM side.
Now on the WM side there was an entry e.g. 0001 E - Storage type (010) before the change was done.
After the change, the transfer posting entered a negative entry for the same quantity of the item. However this negative entry is lying in the Interim storage type 992 e.g. 0001 E - Storage type (992)
I want to nullify these 2 entries. So i read on some forums & thought of doing a LT01 and transfer the positive value from 0001 E - 010 to 0001 E - 992.
However for storage type 010, negative stock is not allowed.
I am confused & dont know what to do in this case.
Can anyone tell me how to nullify this WM stock ?
Your help will be really appreciated.
Thanks
Dan

Hi,
If my understanding is correct. You want to transfer post a stock of material from one storage location to another ( IM perspective ) and from one bin to another bin belonging to different storage types but same plant ( WM perspective ).
As this transfer posting does not involve any Sales order what is the logic behind the selection of movement type 311 E.
I hope you can very well make use of 311 movement type for the transfer posting in IM which will lead to the generation of a PCN in the WM side. On confirming the same you will be able to do the reflection of Transfer posting in WM side also.
I would suggest you to follow the above steps.
1) First check the transfer posting 311 E which you have already completed a PCN in the background. If it is availble, just try to confirm the posting Change notice which will clear off the negative entry and a correponding postitive entry in the receiving storage type.
2) In case if the system have not generated the PCN, then better to cancel the material docuemnt and re do the transfer posting to carry out the process from the start with the movement type 311 which will yield a PCN which can be confirmed to see the stock in the required storage type and in the respective bin accoring to the strategy set.
Regards,

Disable Shelf Life Expiration date for Movement Type 311

Hi All,
Whenever we run the transaction MB1B with the movement type 311, it copies the batch and its shelf life expiiration date. Due to this, there are time when the user unknowingly enter a differrent SLED and hence change the batch unknowingly. We want to stop this. We want that while we are doing 311, the batch record and the SLED should get copied from the batch master BUT the field for SLED should be grayed out or the user should not be abale to enter ANYTHING in the SLED and the system should take the default SLED from batch master. Can we achieve it through config ? Please suggest.

Please get a user exit developed and add it to the program SAPMM07M which is used in MB1B which will solve your purpose. The User exit should be fired when using 311 movement type during copying of Batch Characteristics. Hope this helps you.

Multiple receivng storage locations on Reservation (movement type 311)

Hi
We have a requirement where we create a reservation document either using BAPI or BDC (MB21). At the time of creation we require to maintain different receiving storage location on the reservation. Currently SAP allows to maintain receiving storage location on the header field RKPF - UMLGO only and then copies the same value on all line item field (RESB-UMLGO)..The line item field is not editable or set as I/O field therefore working on finding a user exit or BADI to update fields RESB - UMLGO in background. Has any one had this requirement and in case yes can you please advise how was this addressed.
Thanks
Lokesh

Hi,
If my understanding is correct. You want to transfer post a stock of material from one storage location to another ( IM perspective ) and from one bin to another bin belonging to different storage types but same plant ( WM perspective ).
As this transfer posting does not involve any Sales order what is the logic behind the selection of movement type 311 E.
I hope you can very well make use of 311 movement type for the transfer posting in IM which will lead to the generation of a PCN in the WM side. On confirming the same you will be able to do the reflection of Transfer posting in WM side also.
I would suggest you to follow the above steps.
1) First check the transfer posting 311 E which you have already completed a PCN in the background. If it is availble, just try to confirm the posting Change notice which will clear off the negative entry and a correponding postitive entry in the receiving storage type.
2) In case if the system have not generated the PCN, then better to cancel the material docuemnt and re do the transfer posting to carry out the process from the start with the movement type 311 which will yield a PCN which can be confirmed to see the stock in the required storage type and in the respective bin accoring to the strategy set.
Regards,

MB1B with mov. type 311 - error message

hai experts
I have deleted AAA storage location (in spro) actually stock is available in that storage location. now again i have created AAA storage location (in spro), now i want to trf. that stock.. while doing MB1B with mov. type 311 at the time of saving i am getting error message like this: of the required qty. of material 12356789 (material code) 100.00 kgs remain (s) open.
Pl. help me to come out of this problem
Regards,
sree

Your deletion and recreation has nothing to do with this message, here am very certain.
But to identify what the message caused, you have to give the full message along with its message number (double click message)
It looks like you post your 311 in reference to a document (order, or reservation..). and the quantity that you move is smaller than the requested quantity.

REM- Planned order with Movement type 311

Hi,
I want to use movement type 311 along with planned order in MFBF but system is not allowing me.
Do I need to mention movement type 311 somewhere in configuration of planned order.
Regards,
Samir Wadajkar

Dear
Basically Movement 311 will be used for Material Staging.Material Staging can done with reference to the Material or with reference to the Planned Order etc...
You can do the following with MF60:
1. Direct stock transfer : You must select Staging type (Storage location level)
To use direct stock transfer, you must maintain an issue storage location for each component in the BOM (or in the material master record or the production version). The system only displays those requirements for which you have defined an issue storage location
2. Stock transfer reservation : You must select Staging type 1 (Storage location level)
The system then automatically displays the storage location view of the pull list. The system also only selects the corresponding requirements.
In Global Settings, you must adopt the default settings and you must also select Stock transfer reservation.
I hope you must have maintained the Customization Setting for Stock Determination Strategy with reference to your plant with 311 movement.
Further details refer below link:
http://help.sap.com/saphelp_erp60_sp/helpdata/en/8a/a5a8d04adc11d189740000e8322d00/content.htm
Hope this is clear to you
Regards
JH

Value in Movement Type 311

Dear All,
We are transfering material from One Storage location to another using T-code MB26/MB1B. When We see material movement through MB51 it shows no value. We know, system is showing zero value, as there is no financial transaction in movement type 311. How can we know how much value of material transfered from X storage location to Y storage location from (a) date to (b) date.
Regards
Rajeev Gupta
Edited by: RAJEEV GUPTA on Dec 31, 2007 8:26 AM

Dear friend,
In 311 movement funtion for material transfer from one storage location to another, Once this movement will hit, Only Material document will trigger to create, Account document will not create,, If you need to find the value of transfer material.Plz check plant level stk with mvt type

Difference between Return Po and Retuning with 122 movement type

Dear Experts,
i need some clarification on Return Po and retuning goods with 122 movement type in the context of Excise invoice.
in our previous company we used 122 movement we capture excise invoice with J1IS and referring the incoming excise
and return the material to vendor.
in present company we are directly doing return Po and capturing excise invoice with J1is,here we are not capturing against the
incoming excise,please clarify me.
Regards,
Varun

Hi,
Refer the below thread:
Difference between 102, 122 and 161
In terms of stock movement, both 122 and 161 represents the return delivery to your vendor. The difference takes place in terms of how you are returning your delivery to your vendor - It is movement type 161 that SAP will automatically propose if your return PO is referenced. Otherwise, 122 movement type will be used instead.
Regards,
Prashant
Edited by: Prashant Prasad on Apr 22, 2011 8:51 AM

Movement type 311 is not planned in Back Ground Processing

Hello,
I have created a BDC to run the transaction "MIGO" with movement type 311.
Its working fine in foreground. But i execute in Background i am getting a error message "Movement type 311 is not planned for this operation".
I think there should be some config settings. But i don know where to check configuration ?
If anyone has any sugggestions or answers , Pls post here.

Hi,
Better you can use the BAPI "BAPI_GOODSMVT_CREATE".
Check with your Functional Consultant for this issue......
You may also look for an OSS note and in Last raise a ticket to SAP..but there is no surety that every txn will work with BDC in Background Mode.

Movement type 311- get value against a material

Hi All,
I can get a report of stock value and qty against a material from MCBE report.
But for movement type 311,I am getting only the stock qunatity but not value.
Will there be associated value for this movement type.
Is there any other way where I can see associated value.Please suggest.
Thanks in advance.

Hi,
Mvt type 311 is the transfer between storage location to location in the same plant. Only quantity will be updated and no value will be updated because the valuation area in the same plant.
Here only material document will be generated and no accounting document.
You can see the stock report in t code MB52 locationwise stock with value.
Regards
Ram
Edited by: ramachandran subramanian on Apr 6, 2009 10:02 AM

Idoc mbgmcr02 movement type 311 .. goods movement not possible w/mvmt type

i am using we19 to create a test idoc...i have the ports and partners filled in...i am using movement type 311..i have the material , the plant, the storage location...the qty..i have the move material, the move plant and move storage location filled in...
when i use standard inbound processing it generates the idoc..i go to we02 and look at the idoc..in the status records i get status 51 goods movement not possible with mvmt type 311..????what am i missing
if i do the exact same thing with the transaction migo...works fine...
am i missing something????

i am trying to move material from one location to another using IDOC MBGMCR02..
I am entering the following...
E1BP2017_GM_Code=04
in e1BP2017_GM_ITEM_Create
Material=CON2020
Plant=3000
Stg_Loc=0001
Move_Type=311
Entry Qty=001
Move_Mat=Con2020
Move_Plant=3000
Move_Stloc=0002
Mvt_Ind=??????
In the Mvt_Ind I have tried E,K,M,Q
the in get a status 51 Update Control of Movement Type is incorrect(entry311XX_K)....
Is E1BP2017_GM_CODE = 4 correct???
What should be the Mvt_Ind???

Ountbound delivery with MB1B movement type 311

Similar Messages

Maybe you are looking for