Out of the Box alerts and messages.  Necessary?

Hi,
I have installed Grid Control and I am monitoring a couple of Hosts and DB's and well, before I even did that I noticed that Grid had a whole bunch of Critical and warning alerts along with Policy Vioalations. Now I assume these are out of the box alerts and messages, cause some of them seems pretty dumb to me. I know we can change them to change the values but I just wanted to make sure if I should really worry about these or not? Are they really serious. Some of them don't make any sense to me and I have been trying to look online at places where I can find out what they mean exactly and how to correct them. Does anyone know how to. These messages are just annoying and I would like to log in to Grid and see no alerts or violations. Here are some examples of what I am talking about. Any advice or help is much appreciated :)
Examples Alerts:
-51.55% of all processes are in zombie state, crossed warning (35) or critical (50) thresho...
-Number of Active Agents exceeded the critical threshold (1). Current value: 0
**This one seems dumb to me since I only have one agent on the server and the threshold is set to 1!!!!
-Metrics "Current Open Cursors Count" is at 1673
-Target is in broken state...
**This one I would really like to figure out what it means. It is listed under the errors tab.
Example Policy Violations:
-Critical Patch Advisories for Oracle Homes
-Listener Direct Administration
-Use of Hostname in Listener.ora
-Oracle Home Executable Files Owner
Thanks

-Critical Patch Advisories for Oracle Homes
Nice but pretty obvious - only need if you have a security policy at your company-Listener Direct Administration
Dont believe in that one ...-Use of Hostname in Listener.ora
Same with this ..-Oracle Home Executable Files Owner
Should be fixed .. a valid problem.

Similar Messages

  • I have restored my 1st gen out of the box ipad and can still not connect to anything.wi-fi is enabled and strong.i am losing my mind.forgive me this is my first apple product and this startup should have been easy right?what else do I do?Help!

    I have an ipad that I can not get to connect to anything.Keep getting "server stopped responding" after ipad tries to connect for 5 minutes.I have wi-fi enabled and password given and enabled with strong signal.I have restored to factory settings once allready.I am an Apple newbie as this is my first product experience and it is not going very well.This should be easy and I must be doing something wrong or I have a defective ipad.I have the latest software installed and have itunes connected through my laptop.I am losing my wits and could use some help since I am lost with what to do now.Help?

    If your Laptop is using windows... Try this...
    Temporarily disable your firewall and antivirus software and try again...
    See here for Connection Issues
    http://support.apple.com/kb/TS1379
    From Here
    http://www.apple.com/support/itunes/troubleshooting/

  • How do I return my MB Pro to it's "out of the box" state?

    I have a MB Pro 15". I just got a new one yesterday, and my new co-worker will be getting this one. There is nothing we need to keep, so a backup won't be necessary. How do I go about deleting/reseting everything to it's original out-of-the box state, and make his the new admin, etc?
    Thanks!

    Start up from your install disc, go to Disk Utility and select the disk and click erase - to securely erase data click Security Options and Erase Free Space which will entirely wipe your disk, overwriting it with zeros so that no data is recoverable. 
    Restoring your computer’s software

  • Best Practices in SharePoint 2010 ( Out of the box feature vs Custom Web Part, development )

    Hi
    How do we differentiate on when to allow custom web parts and when to use out of the box.
    What are the performance issues involved when we deploy a custom web part into the SharePoint server. 
    Why do some companies prefer to allow only out of the box features, and no custom work is done?

    SharePoint is a powerful, flexible server product that can provide a wealth collaboration environment right out of box.
    Best answer for your question is depend upon your requirement. Sometime Out of Box features will solve all the problem with little designing. But sometime your requirement need a Custom Web part / solution.
    With OOTB implementation the big advantage is easy to trouble shoot & fix the issues. You will also found tons of blogs on internet for OOTB features. In custom development, its hard to troubleshoot & identifying whether its SharePoint issue or Custom
    code issue.
    check the below article for more ideas.
    http://social.technet.microsoft.com/Forums/sharepoint/en-US/1e7845ef-61e0-4d01-bb6c-92519e6d7139/sharepoint-2010-outofbox-best-practices?forum=sharepointgeneralprevious
    http://www.cdh.com/media/articles/Pages/SharePoint-out-of-the-box---To-customize-or-not-to-customize.aspx
    Master List of SharePoint 2010 On-Premises Custom Development Best Practices
    http://i.zdnet.com/whitepapers/Quest_WPW_SharepointDev_Custom_US_KS_v3.pdf
    Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

  • S430 - touchpad not working at all out of the box

    Hi all
    I know there's a few people who have problems with the touchpad on their thinkpads, I've got another, different problem!  
    I got mine out of the box yesterday and neither the touchpad nor the red joystick controller in the keyboard work.  The buttons on the touchpad also don't work.
    Luckily I had a USB mouse at home and I've been able to the laptop up and running, but no luck trying to get the touchpad working.  I've gone through the user guide, the help guide, the lenovo website etc, but not finding anything.
    When I go into the "control panel", then "hardware and sound" and select "device manager",  the only "mice and other pointing devices" that I have is my HID-compliant mouse which seems to be the USB mouse.  The touchpad doesn't feature at all.
    If I go into "control panel" and select "mouse"  I don't actually have a tab for "UltraNav".  Since all the help out there tells me to go to that tab, I don't really know what to do!
    If I go through the Lenovo Solution Center, it tells me that the "ThinkPad UltraNav Pointing Device" is disabled and to fix it I need to go to the Device Manager.
    But, as already said, in the device manager there's nothing I can do!
    Any help would be much appreciated.
    cheers
    Harry

    Hi
    This notebook seems to belong to the PSAF5E series.
    I wonder where you have found the drivers for this series ?:|
    However, I have checked the Toshiba European page and didnt find the Vista touchpad driver especially for this series.
    BUT the page provides some touchpad drivers (two drivers) for the Equium A200 PSAEE.
    I would recommend installing the Alps Electric Touch Pad driver v7.0.301.4 and the Synaptics Touch Pad driver v. 9.1.14.0.
    By the way; its always recommended to reinstall the OS with the Toshiba recovery CD. If you dont have such CD you could order it from the ASP which is responsible for you country.

  • Is iview considered out of the box?

    Hi,
    If an iView is available is that considered out of the  box?
    What out of the box means?
    Is out of the Enterprise Portal Server.
    Thanks in advance

    "Out-of-the-box" iViews (and any other objects for that matter) would be any that are pre-made for you...like those that are part of the portal install itself, and those that are delivered with Business Packages. "Out-of-the-box" means it is ready to use for it's purpose without any intervention on your part.
    The ones you refer too (from SAP transactions and/or PAR files or whatever else) are more "options" you have when creating an iView (or other object). When creating an iView, a "wizard" steps you through the process which gives you several options for the "kind" of iView you need.

  • Why during setup of mx922 I get a 6000 and a 6001 error message right out of the box

    I just purchased a MX922 and out of the box I get a 6000 error message why?

    I'm glad I was able to help.  I kind of wish mine hadn't worked because I ended up being one of the "lucky" individuals where my phone didn't restore from the backup and I lost all of my contacts, calendar appts, notes, etc.  It took me an extra 2 hrs last night to rebuild the next month worth of appts and try to rebuild my contact list from my yahoo contacts.  Oh well.  I will be getting an android at my next upgrade.  I'm tired of all of the BS that comes with owning an iPhone.

  • In search of assistance learning how to modify the mail message from an out of the box SP2010 approval workflow.

    So, I have found the article
    http://punaro.com/2012/01/derek/modifying-a-sharepoint-2010-workflow-email/comment-page-1/ which appears to walk through the process of modifying an out of the box workflow's mail message.
    However, there is a basic problem that I run into before I get started.
    I am logged into the system as a regular user (ie not a farm admin, etc.).
    I do, however, have full control on the site on which I am working.
    I create a custom list.
    I create a simple one step approval - sharepoint 2010 out of the box workflow.
    I start SharePoint designer and give it the URL of the list. It opens up and I see the various objects on the left side of the screen.
    I click right on the Workflows object - which is where the article says I will find the ability to copy and modify the workflow.
    All I see is "open", "open in a new tab" and "Pin".
    I selecdt open in a new tab - and I get a blank screen labeled workflows that says "There are no items to show in this view".
    So, I click on Lists and Libraries, then on the name of my custom list.
    When the list displays, the Workflows section of the page has a "Modified Workflow" displayed.
    When I right click on it, no menu is shown. When I click on the modified workflow, I get the workflow settings page for that workflow.
    I am trying to figure out how to create the copy of the workflow so that I can modify one of the mail messages in SharePoint designer.
    Is there someone who has some advice on how to find this copy and modify option?  Or perhaps a web site, web forum, article series, or book covering the topic?
    Thank you! 

    Hi lwvirden,
    According to your description, my understanding is that you want to modify the OOB approval workflow in SharePoint Designer.
    After opening the site in SharePoint Designer, just click Workflows in the left panel and then the workflows in the site will load in the right part.
    If you want to copy and modify the OOB approval workflow, then you need to right the approval workflow
    Approval – SharePoint 2010 under Globally Reusable Workflow. After that you will see the
    Copy and Modify button.
    Best regards.
    Thanks
    Victoria Xia
    TechNet Community Support

  • N97 and SIP out of the box?

    Hi there,
    I have a N97 with the latest firmware V21 and wonder, does it now support SIP out of  the box? I found a thread on this forum where one explained how to install necessary voip setting for the N97. Is this still necessary or does it now work out of the box? My N97 does not have a branding, so no harm from this side.
    Regards

    Hi there,
    just finished installing voip setup with Axon.
    This works fine with softphones and linksys pap2 (inbound, outbound and extentions to eachother).
    But on my N97 (V20.0.019) there's no sound.
    Registration is done and axon shows the extension as available but  the call/line is opened without accepting and closed after a couple of seconds without sound.
    Any suggestions on this  

  • Is the latest update to the 6th gen nano a software download or does it come with the new watch faces and larger icons out of the box

    Apple shows the new 6th gen nano with the new selection of watch faces and lager icons etc as per new update, but stores still have the 6th gen nano with just 3 watch faces and smaller icons etc. Is the newer spec just a software update that i do after purchase or does it come updated out of the box?
    Thx

    It should come out of the box with the new 1.2 update, but if it doesn't you can simply connect it to iTunes, download, and install the update from there.
    B-rock

  • How do I start over and bring my MacBook Pro to a brand new out of the box state?

    I have a MacBook Pro with Retinal Display purchased in June 2012.  I have backed up once using Time Machine. How do I put it back to the brand new just purchased out of the box state? Any ideas?  I have done this with windows computers, but never a Mac.

    To restore your MacBook to factory settings, you have to use Internet Recovery. Follow the steps:
    1. Press Command, Option and R keys while your Mac is starting, and open Disk Utility.
    2. Select Macintosh HD in the sidebar, go to Erase tab and erase the disk.
    3. Close Disk Utility and reinstall OS X. This can take hours because your computer has to download OS X from the App Store.
    After restoring the computer to factory settings, open App Store > Purchases to download iMovie, iPhoto and GarageBand

  • Why is my mac so slow i have cleansed and cleaned it is a 2010 mac mini i5 but it runs like a 20 year old pc i have only had it for a few months and it was straight out of the box

    why is my mac so slow i have cleansed and cleaned it is a 2010 mac mini i5 but it runs like a 20 year old pc i have only had it for a few months and it was straight out of the box

    I'm thinking that you have a > Mac mini (Mid 2011) - Technical Specifications because the 2010 model's only have Core 2 Duo processors and the 2011 had the first i5 processor. 
    2 GB of RAM is the minimum requirement for Mountain Lion, but it's hardly enough to really enjoy doing anything else.
    see > Memory and Free Installation Guides for Apple Mac Mini
    Plus I don't have any problems running Mountain Lion and a load of App's on my 2010 Mac Mini with 8GB of RAM.

  • I have messed my MacBook Pro attempting to customize it. I am far from savvy with technology and I would like to erase and reset it to out of the box brand new and start over

    I have messed my MacBook Pro attempting to customize it. I am far from savvy with technology and I would like to erase and reset it to out of the box brand new and start over

    Polly,
    usually there are multiple models of MacBook Pro per model number, but in the case of your model number (A1502), there’s currently only one model for that model number: 13-inch Late 2013.
    To reset your MacBook Pro, you’ll need to boot into Recovery mode by holding down a Command key and the R key as you start it up. When the Mac OS X Utilities menu appears, select Disk Utility. On the left-hand side of the Disk Utility window, select your internal disk (most likely the top item of the list). On the right-hand side, select the Erase tab. For the Format dropdown, select “Mac OS Extended (Journaled)”. For the Name input box, “Macintosh HD” has traditionally been the default name — I don’t know if that’s still the case for the Late 2013 models. After that, press the Erase… button, and erase its entire internal disk. When it’s finished with the erasure, exit Disk Utility, and select Shut Down from the Apple menu. When you start it up again, OS X Internet Recovery will redownload Mavericks from Apple’s servers and reïnstall it on your internal disk. Once it has reïnstalled, run Software Update to get it up to date, and adjust the System Preferences to your taste.

  • Just got a new IPAD3, straight out of the box, but I cant charge it, I have tried with the power plug and cable out of the box but no joy, i have tried resetting the iPad but still no joy, have tried different plug sockets, different plugs/cables, help

    Just got a new IPAD3, straight out of the box, but I cant charge it, I have tried with the power plug and cable out of the box that came with it but no joy, i have tried resetting the iPad but still no joy, have tried different mains plug sockets around the house with no joy, I have tried different USB mains plugs but again no joy, I tried using my new iPad cable into the USB port of my MacBook Pro laptop but still no joy, then, I tried using my old iPod classic cable into my MacBook Pro and that worked, so I have a way of charging my new iPad3 but its not practical as i have to take my MacBook Pro everywhere if I want to charge it which kind of defeats the object of having an iPad, has anybody experienced anything similar and how was it fixed? can anybody help me please...

    Grumpy Gator,
    Please note it did say at the store's discretion, but people have actually been able to return it to the on-line store. (I only saw a couple who tried.)
    And given the outcry, I would think Apple might have other Apple stores join in. Just in case, though, if you can, you might bring it in today.
    If it's an ARS, my guess is they can stick to their 14 day return. Apple cannot force them to do it. SO if it's not bought directly from Apple, and it's past the 14 day deal, I'd bring it in to the store today if you have one. When I gave people the cnet.com site, I gave it so people could read it and know only Apple had made the decision for Apple. And I suggested to some that an Apple reseller would probably stick with their own return policy.
    Because Arnie had just bought his, he should be able to return it to Apple or an ARS because an ARS has to have some kind of full refund or at least return for credit within 7 or 14 days of purchase.
    Hope this helps.

  • Localize (multilingual , bilingual) error messages in out of the box (OOTB) new / edit item form.

    In a multilingual environment am using variation. I have 3 sites root site, English site and Arabic.
    All my lists are in root site with one condition I need to use out-of-the-box forms for data entry. My problem is when I try to insert an item in root web list, it will display English version of new item form.
    I cannot duplicate entry forms for each language, because if a new field is added in list I need to translate and update all the forms manually.

    I'm missing how your question is related to Microsoft Office? What kind of a solution is this (so that I know which forum to move the question to)?
    Cindy Meister, VSTO/Word MVP,
    my blog

Maybe you are looking for