Out put in Background (SM37) not showing All columns

Hi Folks,
         I’m creating an out put display for my query in background , we have define an output device , after submitting the query in back ground it just showing me only 10 columns . I mean I its not showing me all columns when I went to SE37-> select job->”spool ->view (display).
Why it’s happening?
Please help me
Cheers
Usman

When you are submitting the job in background by exexuting your query from Sq01 or Tr.code , a screen will pop-up ask for you device name, on the same screen you’ll see properties hit that, it’ll take you to another screen and change the report format 65 and 200 or 65 and 200. It depends on your out put device . You can only display report till 255 . If you want to active ALV functional enable in background spool job you have to use extracts for that . So you can download your data in correct format.
You can also decrease the length of variables in query so within 255 characters you can see all report columns. 
Hope this’ll help you .
Hope this’ll give you idea!!
<b>P.S award the points.</b>
Good luck
Thanks
Saquib Khan
"Some are wise and some are otherwise"

Similar Messages

  • Function module u0091GET_PRINT_PARAMETERSu0092 Not showing all columns

    Hello all,
    I am using function module ‘GET_PRINT_PARAMETERS’
    CALL FUNCTION 'GET_PRINT_PARAMETERS'
        EXPORTING
          DESTINATION    = LOC_DEST
          COPIES         = WF_COPIES
          LIST_NAME      = WF_LISTNAME
          LIST_TEXT      = WF_LISTTEXT
          IMMEDIATELY    = ' '
          RELEASE        = ' '
          NEW_LIST_ID    = 'X'
          EXPIRATION     = WF_DAYS
          LINE_SIZE      = 132
          LINE_COUNT     = 65
          LAYOUT         = 'X_65_132'
          SAP_COVER_PAGE = 'X'
          RECEIVER       = 'SAP*'
          DEPARTMENT     = ''
          NO_DIALOG      = 'X'
        IMPORTING
          OUT_PARAMETERS = WF_PARAMS
          VALID          = WF_VALID.
    NEW-PAGE PRINT ON PARAMETERS WF_PARAMS NO DIALOG.
        PERFORM WRITE_PDF_SUMMARY USING P_VALID P_COND P_ZMGC P_ZOGC P_PDF.
        NEW-PAGE PRINT OFF.
    But in my report there are 10 columns and in download file it’s showing only 6 columns .If I increase that size to X_65_200 Then it shows all columns But it’s not readable. Please tell me how can I use that fix size X_65_132 & it will show all columns .
    Message was edited by:
            megha waykar

    You r right,But that program is already developed in following sequence
    *==>  1. Create Virtual Spool
                using FUNCTION 'GET_PRINT_PARAMETERS'
    *==>  2. Write Report to Virtual Spool. Use NEW-PAGE PRINT ON option.
                NEW-PAGE PRINT ON PARAMETERS WF_PARAMS NO DIALOG.
                PERFORM WRITE_PDF_SUMMARY USING P_VALID            
                NEW-PAGE PRINT OFF.
    *===> 3. Prepare Path and set spool number.
    *===> 4. Convert List to PDF format.
                 Use function 'CONVERT_ABAPSPOOLJOB_2_PDF'
    *==> 5. download PDF file
                CALL FUNCTION 'GUI_DOWNLOAD'.
    and it's not showing readable download file.
    I don't have to change whole coding. I just want to increase that font.

  • SM37 - Not displayed all columns in results

    Hi all,
    I would like to ask you for help - I need to download some data from BSEG. Via SE16 I define criteria in BSEG (customer numbers, fiscal year etc.) and via Setting - List format - Choose fields select 5 columns that I need to have as output.
    If I use background processing, I don't have displayed only 5 columns that I need, but 64 from 285 fixed columns. The columns that I need, have higher number than 64 therefore they aren't displayed.
    Is there any possiblity how to display all columns?
    Thank you in advance.

    When you are submitting the job in background by exexuting your query from Sq01 or Tr.code , a screen will pop-up ask for you device name, on the same screen you’ll see properties hit that, it’ll take you to another screen and change the report format 65 and 200 or 65 and 200. It depends on your out put device . You can only display report till 255 . If you want to active ALV functional enable in background spool job you have to use extracts for that . So you can download your data in correct format.
    You can also decrease the length of variables in query so within 255 characters you can see all report columns. 
    Hope this’ll help you .
    Hope this’ll give you idea!!
    <b>P.S award the points.</b>
    Good luck
    Thanks
    Saquib Khan
    "Some are wise and some are otherwise"

  • CRM 2011 Outlook Client not showing all columns in Opportunity Views

    Versions:
    CRM: 2011 On-Premise - 5.0.9688.1533
    Outlook: 2010 Professional - 14.0.6122.5000 32bit
    CRM Client for Outlook: 5.0.9690.1992
    Basic Problem
    The Outlook Client views that show up in Opportunities do not have all the columns that are in the view. 
    Some of the views do, but not all of them.
    Example:
    View Name: Won Opportunities
    Columns in view: Created on, Location, Quote Type, Scope of Work, Quote Number, Booked Sale Date.....8 other
    columns (many custom columns)
    Columns in View in Outlook: Icon, Quote Number, Categories, Flag....thats all.
    Other Notes
    This only happens in the Opportunity section of the Outlook Client. 
    This does not happen in advanced find in Outlook or anywhere in the web client. This does not happen for any other entity.
    This happens on all of our users Outlook clients.
    I have tried recreating the view.
    No error messages are recording in any logs that I can find.
    Any ideas on why this is happening or how to fix it?
    Thank you
    Paul

    1. Are you sure this is a System View and not a User Defined View? Can you take a screenshot of all the availalbe Outlook views when you click on the little down arrow to add a new view? Yes.  See the screen shot at the bottom.  It is a public
    view.
    2. What happens when you close the view and add it back?  same results.
    3. What happens when you restart Outlook? I ask because if you customized your System Views, those are only persistent for a given session. If your restart Outlook, then it should reset the View.  we have tried that.  and uninstalled Outlook client
    and reinstalled.  And uninstalled Outlook and reinstalled.  Same results.  The only view that works for opportunities is the Default Custom View.  The strange thing is that the filters are working just fine. just not the columns. 
    4. A workaround - have you tried creating a new System View similar to the one you want? Yes.  same results

  • POWL not showing all columns

    Hi,
    I am sending the field catalogs with 60 columns but only 40 cols are displayed.  I looped through the IT of field catalog and made all col visibility to abap_true.  But still then I am not getting all the cols.
    Please help me.
    thanks in advance.
    best regards,
    suresh.

    Hi,
      There are some limitations on ALV, I know that there are only 255 column max in ALV display(Maybe because of Microsoft Excel). and also there are limitations on the characters number, I'm not sure about that, may not more than 5000 char, you can check it in help.
    Hope this helps
    Bob

  • SALV_WD_TABLE not showing all columns in Enhancement package 4

    Hi all,
    I have a problem when using the SALV_WD_TABLE component in SAP environments with Enhancement package 4. When loading the application not all columns are shown.
    Any suggestions?
    Thanks,
    Regards,
    Morten

    >
    Morten Pedersen wrote:
    > Hi all,
    >
    > I have a problem when using the SALV_WD_TABLE component in SAP environments with Enhancement package 4. When loading the application not all columns are shown.
    >
    > Any suggestions?
    >
    > Thanks,
    >
    > Regards,
    > Morten
    Hi,
    Are you suggesting that it was working in earlier version , now with sp4 it is not working without any modification happened ?
    In that case i would raise a Support ticket.
    Otherwise , you can see if there a method configure_alv and is there any column deletion is happening !!
    There may be a Customizing change happened that the layout is changed and become default.

  • Union all not showing all columns of 2 Excel files

    Hi
    File Excel1.xls has 2 columns: first name and last name.
    File Excel2.xls has 3 columns: first name, last name and middle name.
    Why does "Union all" show only first and last names? I thought that it shows also the middle name. I see it by double clicking box
    Union all. In box Union All Transformation Editor
    I expect such a line:
    Output column name: middle name
    Union All Input 1: <#ignore>
    Union All Input 2: middle name
    Thanks!
    gec

    Hi,
    I think you need to select <ignore> in union all input1 and select middlename in unionall input 2 and Type Middlename in Output Coulmn Name.
    As Shown Below.
    Hope this answer your question.
    If it does mark this as answer please.
    Regards
    Kaushal

  • SelectOneChoice not showing all values from database

    Hi!
    I have to put a list of values in my select one choice. When I do the query in database, all the values are selected. But, with the same query on JPQL, the select on choice do not show all values in database. Anyone can help me, please?
    P.S.: I am using SelectOneChoice with SelectItems, in JDeveloper 11g
    Code:
    <af:selectOneChoice id="selAction" value="#{row.idCmd}"
    unselectedLabel="&lt;Selecione>">
    <af:forEach var="alertTypeNode"
    items="#{bindings.actionFindAll.iteratorBinding.allRowsInRange}">
    <af:selectItem value="#{alertTypeNode.dataProvider.idCmd}"
    label="#{alertTypeNode.dataProvider.nmCmd}"
    id="si1"/>
    </af:forEach>
    </af:selectOneChoice>

    In your page binding check the rangesize setting for the executable you use - set it to -1.

  • List view not showing all podcasts

    Guys, I have the annoying problem that podcast management by itunes and the podcast app are F'ed up.
    Not too lobg ago I experienced my ipad greying out most podcasts that were downloaded and on my ipad, for no reason at all. it took me 2 days fiddling with settings and ended up having to set every sync to "on" and set donwloading to "all" and "keep all podcasts"
    Now I'm experiencing the problem that the "list" view in podcast app, is not showing all podcasts, but the "thumbnail" view is (as far as I can tell...). Why is this and how can I fix it to make sure both views show everything?
    I'm running iOS 7.0.6 and iTunes 11.1.5

    Hey there sporry,
    It sounds like your Podcasts app is not showing your library correctly in the List view but Thumbnail looks ok. I recommend the troubleshooting in the article named:
    iOS: An app you installed unexpectedly quits, stops responding, or won’t open
    http://support.apple.com/kb/ts1702
    Restart the app
    Close the app and open it again.
    Restart your device
    Turn the device off and on.
    Update your device software and your apps
    Update your device to the latest version of iOS.
    Update your apps:
    Open the App Store and tap Updates.
    If updates are available, tap Update All.
    If asked, enter your Apple ID password. The updates will download and install.
    You might need a Wi-Fi connection to update some apps.
    Install another app from the App Store
    If your installed app won't open, download and install a free app that isn't on your iOS device. This should reset your Apple ID authorization.
    Remember to use the same Apple ID that you used to download the app that you're having issues with.
    Reinstall the app
    Remove the app from your device and reinstall it. Remember that deleting an app also deletes its data.
    Delete the app.
    Press the Home button.
    Go to the App Store and download the app again.
    Wait for the app to download, then open it from the Home screen.
    If the download stops, you can resume it.
    Thank you for using Apple Support Communities.
    Cheers,
    Sterling

  • Account Dimension not showing all members in the cube in Analysis Services

    Hi,        
             In SAP - BPC 5.1 after processing account dimension all the members are created under account dimension in analysis services but the same cannot be found in the data cube. Hence the reports generated through SAP - BPC is not showing all the members.
             The issue looks very strange as we can see the members getting created but the same is not getting populated in the cubes. I am not able to visualize what exacly the issue is? Is it with the application or with the analysis services?
    Thanks
    Sharath

    Your sixth sense is correct, there is definitely support in MSAS and BPC 5.1 for multiple hierarchies in the account dimension.
    I'm also referring to parentH1 and parentH2, but perhaps we're still speaking of different things.
    In the past, I faced a very similar problem as you, and the root cause was because I had one member, let's call it FancyParent, which, in H1, had children Child1 and Child2.
    But in H2 it had children Child1, Child2 and Child3. I forget now if that was how I wanted the setup to be, or if it was a mistake on my part, but either way, MSAS doesn't allow this. The admin consol didn't complain when processing the dimension -- this was in Outlooksoft 5.0; perhaps validation has improved now.
    But the cube was completely unworkable. Certain things were calculating correctly, but everything in the account dimension in the area around FancyParent (above and below it, in both hierarchies) was quite unpredictable.
    By disabling first one, and then the other, of the two hierarchies, and disabling blocks of accounts, I was eventually able to pinpoint the problem. But it took days to figure out what was the problem. (The account dimension had 2500 members and 4 hierarchies, and it was not a pretty sight.)
    A parent must have the same definition of children in all hierarchies. It can't, as another example, have children in H1, and be a base member in H2. Each member can have different parents in the two hierarchies, but must always have the same children in both.
    To work around this problem, I had to create two separate accounts NetIncomeH1 and NetIncomeH2 (and PretaxIncomeH1, PretaxIncomH2, etc. all the way down to the point where they branched off), to get the two separate aggregations of the P&L in the two hierarchies. Once I did that, it made sense to me why, but I also swore off on frivolous extra hierarchies ever again.

  • EMC Does Not Show All Databases Copies Information on DAG - Exchange 2010 SP2

    Hi guys,
    Really need your help here, suddenly my customer complain that they cant see any information on database copies on their Active Copy DAG Exchange server, for another DAG members, the database copies information is visible. After do some readings, I found
    this related to Exchange 2010 SP1 known issue. 
    http://workinghardinit.wordpress.com/2010/09/13/emc-does-not-show-all-database-copies-after-upgrade-to-exchange-2010-sp1-still-investigating/
    But, for my environment, there is Exchange 2010 SP2. I have no idea on this issue since there is no error log thrown out from the event viewer. I already try to restart the server itself and the Microsoft Information services but no luck.

    Hi,
    Based on the description, your customers could see passive database copy information, but they couldn’t view the detail information such as state: Healthy in EMC.
    When did this issue begin?
    Please restart the AD topology service to check result.
    Since we have the information correctly on Exchange shell, please try to clear EMC cache and then open console to check if you can see database copy in EMC.
    Best regards,
    If you have feedback for TechNet Subscriber Support, contact
    [email protected]
    Belinda Ma
    TechNet Community Support

  • Cache does not show all config items

    SXI_CACHE is not showing all my config items. 
    When looking at SXI_CACHE, I noticed that only the config items pertaining to actual SAP services (Business Systems) seem to show up??  Is this normal?  I've refreshed the cache (both delta, and full). 
    Also, when I double-click on Services, all the services show up, but the ones that are not actual SAP systems have an 'X' in the 'Flag' column ("Event has occurred")  What does that mean?
    Background:
    We are in the prototype stage; I am the only one in the box. I created a simple File-BAPI scenario just to demonstrate that things worked.  For the last couple months, the comm channel was set to Inactive.  Attempted to reActivate the comm channel to get back in to it, and it's not working.  I've double-checked everything I can think of, from the obvious (is there a file to be pulled), to the not-so-obvious (was the scenario changed by someone else in my absence).
    Also, there are not sender agreements listed in SXI_CACHE?
    Thanks in advance,
    Brian

    Actually, I wasn't using Business Service, I was using Business Systems from the SLD as Services without Party.
    However, I just created a Business Service, filled in the Inbound and Outbound Interfaces, created Comm Channels, RD, ID, SA, RA, and activated all - still no luck.  This time, some of the pieces DO show up in the cache.  The ID, RA, and the Receiver CC show up in the cache, the RD, SA, and the Sender CC do not.
    This has got to be a cache problem.  We are using a VERY old and slow machine to run XI on.  Each time I activate something in the DR or CD, I have to go to SXI_CACHE and Start Delta Refresh.  I'm thinking there may be a timeout setting or something.  What's frustrating is that it used to work just fine.
    Any other cache related ideas?
    ***EDIT - just rechecked - getting messages from newly created Business Service, but they are failing in mapping....I guess I need to delete and recreate everything and try again.  Maybe that will clear up the cache issue....
    Message was edited by: Brian Vanderwiel

  • Lightroom not showing all photos avail for import

    About a week ago, I tried to import some new photos into LR 3 (3.4.1 to be exact), and the import dialogue does not show all the photos that should be available for import.
    The files are on my hard drive and there are approximately 200 photos in the file folder. When I open LR's import dialogue to import the photos (after navigating to the proper location to import from of course), it shows me 17 of the photos in the file folder! I selected "all" instead of "new" to see if that would make a difference and it did not. I made sure I did not have "do not import suspected duplicates" checked, even closed LR and rebooted my computer.... that didn't work.
    I tried creating a new catalog to see if that would fix the issue, and it did not.
    I'm not sure what else to try, or if there is a known fix out there (having a heck of a time finding one in my internet search!)
    Any ideas/suggestions?
    Thanks!
    -KBP

    Okay, so for giggles I tried checking in the Bridge to see if that changed anything... and it only showed the few files too. So I decided to "select all" and noticed at the bottom left that it listed the balance of my photos as "hidden." I have no idea how my files got hidden, or why it was only some and not others... but at least it's all fixed now and I can get back to what I need to do in LR!

  • Vertical scrollbar not showing all the records when I scroll down.

    Vertical scrollbar not showing all the records when I scroll down.
    Using Oracle forms 10g , operating system windows
    I have two fields with number of items dispayed = 15.
    I have a vertical scroll bar with them. There are 34 records in the table but the scrollbar only shows 15 records.
    Here are the properties for block / scrollbar.
    WORK_CATEGORY
    - Subclass Information                           
    - Comments                                       
    * Navigation Style                                Same Record
    - Previous Navigation Data Block                 
    - Next Navigation Data Block                     
    - Current Record Visual Attribute Group          
    - Query Array Size                                0
    - Number of Records Buffered                      0
    * Number of Records Displayed                     60
    * Query All Records                               No
    - Record Orientation                              Vertical
    * Single Record                                   No
    - Database Data Block                             Yes
    - Enforce Primary Key                             No
    - Query Allowed                                   Yes
    - Query Data Source Type                          Table
    * Query Data Source Name                          WORK_CATEGORY
    * Query Data Source Columns                      
    * Column Name                                   JOB_TYPE
    * Column Type                                   VARCHAR2
    - Column Type Name                             
    - Parent Column                                
    * Length                                        30
    * Precision                                     0
    * Scale                                         0
    * Mandatory                                     Yes
    * Column Name                                   WORK_CATEGORY
    * Column Type                                   VARCHAR2
    - Column Type Name                             
    - Parent Column                                
    * Length                                        30
    * Precision                                     0
    * Scale                                         0
    * Mandatory                                     Yes
    - Query Data Source Arguments                    
    - Alias                                          
    - Include REF Item                                No
    * WHERE Clause                                   
    * ORDER BY Clause                                 job_type
    - Optimizer Hint                                 
    - Insert Allowed                                  Yes
    - Update Allowed                                  Yes
    - Locking Mode                                    Automatic
    - Delete Allowed                                  Yes
    - Key Mode                                        Automatic
    - Update Changed Columns Only                     No
    - Enforce Column Security                         No
    - Maximum Query Time                              0
    * Maximum Records Fetched                         0
    - DML Data Target Type                            Table
    - DML Data Target Name                           
    - Insert Procedure Name                          
    - Insert Procedure Result Set Columns            
    - Insert Procedure Arguments                     
    - Update Procedure Name                          
    - Update Procedure Result Set Columns            
    - Update Procedure Arguments                     
       Don't know where am I going wrong. I'll really appreciate if you can help me in this.
    Thanks.
    Edited by: 831050 on Sep 14, 2011 8:05 AM

    One of the items is a list item.. here are it's properties:
    * Name                                          JOB_TYPE
    * Item Type                                     List Item
    - Subclass Information                         
    - Comments                                     
    - Help Book Topic                              
    - Enabled                                       Yes
    * Elements in List                             
    * Label                                      
    * List Item Value                             LIST20
    * List Style                                    Combo Box
    - Mapping of Other Values                      
    - Implementation Class                         
    - Case Restriction                              Mixed
    - Popup Menu                                   
    - Keyboard Navigable                            Yes
    - Mouse Navigate                                Yes
    - Previous Navigation Item                     
    - Next Navigation Item                         
    - Data Type                                     Char
    - Data Length Semantics                         Null
    - Maximum Length                                30
    - Initial Value                                
    * Required                                      Yes
    * Copy Value from Item                         
    - Synchronize with Item                        
    - Calculation Mode                              None
    - Formula                                      
    - Summary Function                              None
    - Summarized Block                             
    - Summarized Item                              
    - Current Record Visual Attribute Group        
    - Distance Between Records                      0
    * Number of Items Displayed                     15
    - Database Item                                 Yes
    * Column Name                                   JOB_TYPE
    - Primary Key                                   No
    - Query Only                                    No
    - Query Allowed                                 Yes
    - Insert Allowed                                Yes
    - Update Allowed                                Yes
    - Update Only if NULL                           No
    - Visible                                       Yes
    * Canvas                                        CANVAS2
    - Tab Page                                     
    * X Position                                    47
    * Y Position                                    137
    * Width                                         187
    * Height                                        18
    - Visual Attribute Group                        DEFAULT
    - Prompt Visual Attribute Group                 DEFAULT
    - Foreground Color                             
    * Background Color                              white
    - Fill Pattern                                 
    - Font                                         
    * Font Name                                     Tahoma
    * Font Size                                     10
    * Font Weight                                   Demilight
    * Font Style                                    Plain
    * Font Spacing                                  Normal
    * Prompt                                        Job Type
    - Prompt Display Style                          First Record
    * Prompt Justification                          Start
    * Prompt Attachment Edge                        Top
    - Prompt Alignment                              Start
    * Prompt Attachment Offset                      10
    * Prompt Alignment Offset                       0
    - Prompt Reading Order                          Default
    - Prompt Foreground Color                      
    - Prompt Font                                  
    * Prompt Font Name                              Tahoma
    * Prompt Font Size                              10
    * Prompt Font Weight                            Bold
    * Prompt Font Style                             Plain
    * Prompt Font Spacing                           Normal
    - Hint                                         
    - Display Hint Automatically                    No
    - Tooltip                                      
    - Tooltip Visual Attribute Group               
    - Direction                                     Default
    - Initial Keyboard State                        Default
    - Keyboard State                                Any
        

  • Nokia E-5 music player does not show all songs. Th...

    my Nokia E-5 music player does not show all songs. The filemanager does though. have tried every damn thing that i could, from the internet. no solution yet. Nokia wont address it. any solutions? please dont ask me to refersh my music player. nokia now manufactures stupid phones, instead of smartphones..
    can any one help, friends? the last option i have to sell it off and wait for an HTC qwerty mango 7.5 phone

    I perfectly understand that this is frustrating and of course Nokia should adress this.
    I do not work for Nokia so maybe you could contact them. I see you have been to a care centre and reset it, but hopefully by contacting them by email they can log the issue for further work on firmwares?
    I hope this sorts out. Have you btw, tried with some other memory card?
    If it's not too much of a struggle, try backing up everything you have on it and format it, then reboot the phone which will recreate the needed folders and then drag and drop your stuff back to it and check again.
    Hope you get it solved mate!

Maybe you are looking for

  • How to get work JavaFX WebViewBrowser sample in debian linux wheezy?

    How to get work JavaFX WebViewBrowser sample in debian linux wheezy You may also check latest version of this problem here...  The Starting point I have Debian wheezy java version "1.7.0_40" Java(TM) SE Runtime Environment (build 1.7.0_40-b43) Java H

  • How enable a disabled ipod to another pc

    my ipod is dasbled well my other one how do i fix it it was connected to another computer and i tunes now that other computer is broken and i am trying to get itworking and it has a passcode on it and it is not allowing me to do anything wth it ?? he

  • Batch split in Idoc DESADV.DELVRY01

    Hi, my scenario is non-SAP --> xi --> SAP for dispatch notifications. The sender system provides batch information on line item level, sometimes with batch split. I am looking for a possibility to post the dispatch advice in R/3 with batch split. I a

  • Why don't google links work?

    Google search sometimes doesn't work. Links from google search do not open. This problem has existed since upgrade of foxfire 4. Java upgrade current also.

  • Referencing (?) cells to an other table

    Hello, I try to explain what i like to have: I want to have a connection from one cell in f.e. table A to one cell in table B. The value of the cell in table A is a calculated value, f.e. a summary. Now this value should appear in the cell on sheet B