Out put type for simple mail

Hi Sd Gurus
             i change the output type  medium from printout to simple-mail. i got a error( Mail partner not found or empty! Obj
created without partner!). please give the solution.
   Thanks

Hi Hari,
Please Check that you assigned any  partner function to the output type.
and  that e-mail address is maintained for your required  partner.
Thanks
Dasaradha

Similar Messages

  • Regarding out put type for ME22N

    Hi All,
    I have configured out put type in SPRO for Purchase Order. Like
    SPRO->Material Management->Purchasing->Messages->Output Control->Message Types->Define Message type for Purchase Order->Maintain Message types for PO's. Now I want to use this out put type to configure at ME22N to print smart form,But here, While selecting Output type in ME22N,It is saying as out put type is not defined. So how to get this here in ME22N.
    Thanks in advance

    Hi,
    It seems that you have not assigned o/p type to your procedure. Go to NACE (common transaction to maintain o/p s), select EF , go to procedures , doubleclick on the procedure and check if you message type is assigned . Please maintain your o/p type if not maintained.
    To check the procedure used for PO ,  use the path,
    SPRO-> Materials Management-> Purchasing -> Messages -> output control -> Message Determination Schema -> DEFINE MESSAGE SCHEMA FOR po.
    Please also maintain other settings like condition record (with communication method )for o/p type in NACE.
    Regards

  • Configure OUT PUT type for delivery to EDI

    HI
    how to set up the out put type as EDI  for Out Bound delivery .
    so when ever a delivery is processed via VL71 there has to be an idoc to be generated in the system

    hi
    check with the following steps...
    1) <b>Go to SPRO ,</b>
    2) <b>copy the existing output type,</b>
    3) <b>give your own name to outpur type</b>
    4) <b>associate the partner function like a print o/p edi o/p ale o/p</b>
    5) <b>then associate ur program with the o/p type.</b>
    Hope this solves ur problem....
    <b>do reward if useful....</b>
    regards
    dinesh

  • T code or path for creating Z out put type for picking

    if I need  to create u201CZ u201Cout put type for picking list copying standard out put type( EK00). Which T- code I have to use or  which path  , I  have to follow in IMG  .
    I want to create u201C Z u201Ccondition type for picking list , copying   EK00 which is standard condition type for picking  list .
    Thanks u2026

    it is part of V4 application, if you dont see V4, use tcode v/38 .... there you will find it.

  • Z Out Put Type For Picking List In VL06

    Can I assign Z Out Put Type of picking list in VL06 . If yes ,  I request you to mention where and how I can assign  please .
    Thanks In Advance

    Dear Jaya,
    The picking list Z output type you can get in VL06 transaction through assigning the same output type in your shipping point detail screen.
    IMG path is SPRO-->Enterprise Structure -->Definition -->Logistics Execution -->Define, copy, delete, check shipping point. Here you select your shipping point then go in to the detail screen here you can assign your Z picking list output type under Print Picking list tab.
    Before that you need to do these configuration settings.
    1.You need to define the Z Output type
    SPRO>IMG>Logistics execution>Shipping>Basic shipping functions-->Output Control -->Output Determination -->Maintain Output Determination for Outbound Deliveries -->Maintain Condition Tables -->
    Maintain Output Types.
    2. Using TCode V/38, you have to maintain the Z condition type by clicking on new entries, maintained the time,print parameters and transmission medium.
    You need to assign the processing routines Prog: ,Form Routine:, and Form:
    3. You need to maintain the print parameters based on the shipping point for your Z output type.
    through transaction VP01SHP.
    I hope this will help you,
    Regards,
    Murali.

  • Is it possible to assign 2 out put type for printing Exc Invoice thru J1IS

    We want to assign 2 separtae pre printed stationary for printing excise invoice printed trhough J1IS
    one is alredy assigned to out put type ZEXC, is there a away to assign one more out put type to printing through J1IS.

    We want to assign 2 separtae pre printed stationary for printing excise invoice printed trhough J1IS
    one is alredy assigned to out put type ZEXC, is there a away to assign one more out put type to printing through J1IS.

  • Out Put type for sap script or smartforms

    hi,
    Actually, i want out put type, application, SAP Script or Smartform name and program name of transaction code          ( F.64 ). i.e. correspondance Maintain request.
    Thank You...

    Manoj,
    In SPRO follow this path.
    Form 16A
    Financial Accounting
    Global settings
    withholding tax
    Extended Witholdong tax
    POstings
    India
    Withholding tax certificates for vendors
    maintain no.groups and script forms.   
    For cheques and Payment Advisory.
    Go to FBZP
    click on printmethods in company code
    click on position
    give Company code and payment method
    then in the next screen double click on the payment method
    This way you will get to see the forms assigned to it.
    For Forms for Correspondence.
    Financial Accounting
    ---Global settings
    correspondence
    define form names for correspondence print.
    K.Kiran.

  • Out put type for delivery challan

    Dear all
    We are Developing Forms for Delivery Challan, GR receipts , GR Tag and GR Issue
    Please reply me what message type is needed for each transactions and how it is attached to specifice movement type.
    Regards,
    Vimlesh Shah

    yes i know various types are available i system
    but which to use and how it is link to specific movement type
    eg  return to vendor ..out put is needed for only selected movement type and which standard form need to maintained
    Regards,
    Vimlesh Shah

  • Out Put Type for Delivery

    Hi friends
    I would request you to guide me to assign output type to delivery .
    Regards
    jp

    Hi there,
    You do all the O/p procedures in SPRO -> Logistics Execution --> Shipping --> Basic functions --> O/p control.
    There 1st define a new O/p type. In the transmission medium mention if it is a prinout or EDI or external send (mail). In the default values mention if it is to trigger immediately or upon running of a batch job.
    Then define & assign an O/p control prog in which you mention how the O/p is supposed to trigger, smart forms for the form layout etc.
    Define the access sequence & assign it to the O/p type.
    Maintain the O/p determination procedures. Assign the O/p type to the procedures. In the requirement routine put a condition as to when the O/p is to be triggered if required. For eg if it has to triggr immediately after saving the delivery or upon PGI.
    Then assign the O/p determination procedure to the delivery types.
    Fianlly maintain the condition records sotht it will trigger the O/p based on the requirement. Also if it is a print O/p, in communication assign a printer name (local or any other name) sothat the printout will come from that printer.
    Refer http://help.sap.com/erp2005_ehp_03/helpdata/EN/30/c6853488601e33e10000009b38f83b/frameset.htm
    for further information on O/p determination.
    Regards,
    Sivanand

  • GR Print Out Put Types

    Hi
    Wats the diff between invidual slip and collective slip in MIGO screen
    Wats the std out put type for GR print out in mb90
    Vijay

    hi
    individual means single item per printout
    collective means all items in GR
    o   Individual slip (version 1)
         In this case, one GR/GI slip is printed out for each item.
    o   Individual slip with inspection text (version 2)
         In this case, one GR/GI slip is printed out for each item. In
         addition, a quality inspection text is printed if there is one in
         the material master record.
    o   Collective slip (version 3)
         In this case, a collective slip including all the items in a
         document is printed.
    WE01, WE02 and WE03,  are std output types
    regards
    kunal
    Edited by: kunal ingale on Dec 27, 2008 9:50 AM

  • Out put types not appearing for HUs

    Hello All,
    Can anyone help me in explaining how to make use of the button "F6PrHU" in LM18 screen for RF. I tried to use it to print my HUs, but I get message as "Print option is not activated".
    Moreover none of the out put types defined in print procedure in SPRO are getting populated in the out put screen of HU. When I see extras->output for any HU I see the section blank with no output types.
    Please provide your valuables inputs.
    Thanks,
    Amit G

    Hello,
    it can be activated in user-exit. For details refer to SAP help [Printing Using the User Exit  |http://help.sap.com/saphelp_erp60_sp/helpdata/en/7b/5371386afa2045e10000009b38f889/content.htm]
    Andrzej

  • How to generate idoc  PODRCH02 using out put type

    Hi All,
    I need to generate outbound idoc PORDCH02 and message type PORDCH using out put types (messages).But i unable to generated this idoc using message type. System is giving error as  *No recipient found for message type PORDCH in the ALE model*
    To do this , i have done the following steps.
    1. In BD64 i have configure the business object BUS2012, using add bapi. ( In cust.distn model it doesn't allowing the message type. so i have given BAPI )
    2. In partner profile (WE20), for sending logical sytems
    i have configure the message type in outbound parametes.
    3. In NACE for out put type NEU  i have given medium as Distribution (ALE),  Partner function as LS     
    Could you please help me out , what are the necessary steps i need to take care and what are the steps i missed out.
    Thanks and regards
    Praveen

    In distribution model, you have to configure both the sending system and receiving system. The Tcode of Distribution model is BD64.

  • Invoice out put types

    Hi All
    We have TWO invoice out put types  ( ZLD1,& ZLD2) for invoice printing.
    when we use VF03 ------> issue output
    it is default showing only ZLD1, Manualy we have to Add ZLD2.
    is possible to set ZLD2 also in autoamticaly....
    RGds
    Pramod

    VF02, enter the invoice number, press enter
    press the "I" button
    If I double click on the first output type RD00, I will have this
    If I click on the ACCESS 06 (output found)
    I have the exact line of the VV31 trans 
    Fred

  • Application type  & out put type

    Hi ,
    For MI21 (Physical Inventory Documents) reprt what is the
    1)application type
    2)out put type
    Thanks & Regards
    Krishna

    Here are the standard ones for printing
    Output Types Mode (1= Printing)  Application
    ET01   1                                     ME
    J1IB    1                                      ME
    J1IF     1     ME
    WA01   1     ME
    WA02   1     ME
    WA03   1     ME
    WAE1   1     ME
    WAE2   1     ME
    WAE3   1     ME
    WE01   1     ME
    WE02   1     ME
    WE03   1     ME
    WEE1   1     ME
    WEE2   1     ME
    WEE3   1     ME
    WEK1   1     ME
    WF01   1     ME
    WF02   1     ME
    WLB1   1     ME
    WLB2   1     ME
    WLB3   1     ME
    Hope That Helps
    Anirban M.

  • Defaulting the Out put type in out put

    Hi All,
    I have an issue in output- I am having two out put types say AA00 & BB00 for say order confirmation and order acknowledgement. When I am issuing out put for print I am getting both the condition option but not able to select? I want to make the one of the condition as default condition, How can I do it?
    Your help will be rewarded.
    Manoj

    Hey,
    Check the Tcode V/43 where you can maintain the output Determination procedure and the default output type.
    Regards,
    Ajai.
    Don't forget to reward points if useful.

Maybe you are looking for

  • Reset Page number in Smartforms

    Hi, I have a smartform with a page break when ever the ship to party of the line item changes. In the output I have page counter (e.g. Page 1 of 10). Currently the total number of pages is same as the total number of pages in the spool and is suppose

  • Uploaded blobs are not moving to RBS storage even RBS is enabled for this content db

    Hi In a production environment RBS  is configured for SharePoint content dbs , and sql server  has failover clusters and alwayson Now each content db  size is very huge : mdf file : 617 GB and .ndf file292 GB and  RBS Storage is :  4,742,795 Files, 1

  • Changing sync settings once mobileme has expired

    I dropped mobile me, but can't figure out how to change my sync settings for Calendars to be manual instead of "over the air," as iTunes says. Settings on my iMac won't let me change anything because I'm expired. iTunes is stuck on the "over the air"

  • Problem running on MacBook Pro

    I have recently acquired a MacBook Pro and migrated all data/software from my iMac running up-to-date OS. This migration includes inDesign, which runs on the iMac, but any attempt to run it on the MacBook simply crashes. I would like to reload but, s

  • Any problems when installing Windows 7 SP1?

    Hello everyone, I just got myself a MacBook Pro yesterday and today I just installed Windows 7 Ultimate via Boot Camp. I want to update it to Windows 7 Service Pack 1 and was wondering if there were any problems with doing that. For example, driver i