Outgoing error

Hi ,this may be simple but always gets som problem while trying in f-53, outgoing payment with clearing. process, already i have posted one document in f-43 for 500000, now for 5000 in f-53 . .what is my error . what should i do for clearing this error? kindly anyone answer this issue . urgent...

Hello Ram
If you are making initial payment i.e., making payment for the first time partially then go to partial tab and click on it. you will get the one more field under partial tab, double click on it, the amount what you have entered will be adjusted against assigned.
if it is final payment of partial then you can clear in standard payment method itself.
kindly confirm.
Thanks in advance

Similar Messages

SSL Outgoing Error

Srs,
Houve uma migração de nossos servidores de exchange e os adminstradores adotaram uma conexão segura (SSL).
Foram informados e alterados as novas URL's dos servidores e suas respectivas portas nos Communications Channels (Incoming e Outgoing) do Integration Directory (PI).
Efetuei a alteração simples mencionada na nota: 856599; Porém, somente para o Incoming a alteração surtiu efeito.
Já para o Outgoing a seguinte mensagem de erro é retornada tanto no SXMB_MONI quanto no Communication Channel Monitoring: u201Cfailed to send mail: iaik.security.ssl.SSLException: Invalid SSL message, peer seems to be talking plain!u201D
Efetuei alterações diferentes nos endereços das urls dentro do PI, mesmo assim o communication channel monitoring me retorna erros... diferentes, mas ainda com erros!
smtpS://smtp-:587 (porta informada e testada via telnet)
Configure User Authentication: X (Check box is selected)
Authentication Method: Plain (from drop-down box)
User: mail.xyz_@_xyz.com
Password: (a senha é mencionada)
Existe mais alguma configuração dentro do PI ou no VA para habilita a conexão SSL?
Criar algum certificado (VA, STRUST, STRUSTSSO2, etc)?
Grato e toda ajuda será muito bem vinda,
Ricardo

Henrique,
Obrigado por sua resposta!
Não, não é necessário nenhuma autênticação.
Irei seguir os passos, conforme procedimentos descritos na nota: Note 891877 (Message-specific configuration of HTTP-Security) e também com informações baseadas no link:
http://help.sap.com/saphelp_nw04s/helpdata/en/fb/c2953fc405330ee10000000a114084/frameset.htm
Se obtiver êxito, torno a postar a solução!
Abçs,
Ricardo

Outgoing Email errors

I setup a POP3 Outlook account on my Pre. Both the incomming and outgoing server information is the same. No encryption. I am receiving mail just fine. I can't send a new or reply to an amail. Outgoing errors.
Any suggestions?
Post relates to: Pre p100eww (Sprint)
This question was solved.
View Solution.

Problem Solved - automajiclally! After three hours in a Sprint store and another two hours. I decided to delete all the email accounts and begin again. Didn't work the first time, but after the third attempt of a manual email setup, it finally worked.
For people using a Network Solutions hosted website and email system: the Palm Pre set up is
POP3
Incomming Server: mail.yourdomain.com
outgoing Server: mail.yourdomain.com (uses the same login as incomming)
No encryption.
Now, onto another problem that may never be resolved...syncing calander and contacts without an exchange server.

"This VI or function runs normally only if no error occurred before this VI or function runs" any good work arounds?

I have a couple of applications where data is collected and files are saved several times during it's operation. I would like to just simply collect any errors and display them at the end of the run, but both Visa and File read write vis will not allow that. If the error cluster isn't wired then an error message will pop up and operation stop until somebody clicks on continue. That doesn't work well for my operation either since it's mostly running without any attendence.
In case of a Visa operation I input a dummy error cluster and collect a dummy error cluster at the output. Any error messages created by the Visa vis is lost. I guess that's not so bad, but sure is a pain.

The reason for the dialog box is the "Automatic Error Handling". You can either turn it off in LV options or wire the outgoing error cluster to something - like a subVI that parses the contents of the cluster and writes them to a file if an error occurs.
Why are the VISA errors being "lost"? What do you mean you collect a dummy error cluster at the output? Can you post some of your code?
Mike...
Certified Professional Instructor
Certified LabVIEW Architect
LabVIEW Champion
"... after all, He's not a tame lion..."
Be thinking ahead and mark your dance card for NI Week 2015 now: TS 6139 - Object Oriented First Steps

Yosemite outgoing mail bugs

I've had a host of brand new outgoing mail bugs again. I've truned off the auto-detect options in mail pref MANY times and somehow they just keep coming back. Yahoo is especially affected. I'm stuck in the hospital trying to get paper-work to lawyers and accountants to try and wrap up affairs and this issues is making it difficult to even know what's going out and when. I paid for the dependability/ reliability of an Apple product, and feel cheated. It shouldn't take decades for Apple to be able to include a reliable mail client in it's OS. Seems like the new crop of outgoing errors started up again around new years and hasn't abated yet. Tried reinstalling the OS from recovery window hoping mail would come along for the ride -- and got a message that the servers weren't available -- to try again later. Well I've tried over the course of several days -- al with the same result. MBP is about to become "spare parts" and I'm looking at a chrome system for my home with a good NAS server for my needs. Brand loyalty can be lost over time.
Me- two MBP - 2011. Shopping now for new dev machine.
Household - one 1Phone 6 for partner, 1 iPhone 3gs for me
Household - 3 2nd gen iPads- wifi only
Household -1 airport extreme
Household - 2 time capsuls - one is new, the other a couple of years old
Household - 1 Apple TV
Household - 3 airport express units to play music around the house
ME - developer with more than 5 apps in App Store.

Easy fix that worked for me instantly: Click Connection Doctor when the dialogue box opens. Double click the text in details. Click Advanced tab. Change username from "johndoe @ gmail.com" to simply "johndoe". And to be extra cautious, re-enter your password.
This can also be achieved by going to Mail-->Settings-->Accounts.
If that doesn't work, perhaps go back to Mountain Lion and wait this issue (and a few others) out for a couple months. Please let me know if this works for you.

Mail connections problems

I have this problem both on a MacBook Pro running 10.5.8, and an iMac running 10.6.4.
I get constant email errors, such as this:
"Could not connect to this POP server. Check your network connection and that you entered the correct information in account preferences."
"The attempt to read data from the server xxxxx failed"
I get outgoing errors also:
"Cannot send message using the server xxxxx"
It clears up on its own, then happens again. This can go on all day.
For years I had earthlink DSL. I thought the problem was the DSL. So I switched today to Comcast Business Class cable internet. Much faster, but same email problems. I have a new ISP, new modem, both wired and wireless connections. So now what?
If it is hardware, I also have an Airport Extreme and a ethernet hub. Here is my "signal flow": cable modem -->Airport-->ethernet hub. The imac gets internet/mail over hardwired ethernet from the hub, the MBP wireless from the Airport.
The guy who runs the mail server for our business email says it is not his server, he has nearly 1000 users and no one else is having problems. When we are having problems I have been able to connect to his server from my iPhone via 3G, no problem, so I tend to believe him.
So what next? I don't think it is my settings, because the problem is intermittent and solves itself. Could the Airport Extreme be breaking the connection? I have reset it (had to reset it to when I changed from Earthlink to Comcast). I do not think the hub has anything to do with it, because the MBP does not see the hub.
Looking forward to your responses.
Don

I have this problem both on a MacBook Pro running 10.5.8, and an iMac running 10.6.4.
I get constant email errors, such as this:
"Could not connect to this POP server. Check your network connection and that you entered the correct information in account preferences."
"The attempt to read data from the server xxxxx failed"
I get outgoing errors also:
"Cannot send message using the server xxxxx"
It clears up on its own, then happens again. This can go on all day.
For years I had earthlink DSL. I thought the problem was the DSL. So I switched today to Comcast Business Class cable internet. Much faster, but same email problems. I have a new ISP, new modem, both wired and wireless connections. So now what?
If it is hardware, I also have an Airport Extreme and a ethernet hub. Here is my "signal flow": cable modem -->Airport-->ethernet hub. The imac gets internet/mail over hardwired ethernet from the hub, the MBP wireless from the Airport.
The guy who runs the mail server for our business email says it is not his server, he has nearly 1000 users and no one else is having problems. When we are having problems I have been able to connect to his server from my iPhone via 3G, no problem, so I tend to believe him.
So what next? I don't think it is my settings, because the problem is intermittent and solves itself. Could the Airport Extreme be breaking the connection? I have reset it (had to reset it to when I changed from Earthlink to Comcast). I do not think the hub has anything to do with it, because the MBP does not see the hub.
Looking forward to your responses.
Don

Mail receives email but does not send

Hi,
I've just started to use Mail and am now using it to send and receive an email account that I used to run through Thunderbird on my Windows machine.
Mail can receive email for me, but it won't send it. When I try to send email, first I get an error message:
“... does not appear to be a valid email address. Please check the address and try again.
Then another:
This message could not be delivered and will remain in your Outbox until it can be delivered.
Verify that you have addressed this message correctly. Check your SMTP server settings in Mail Preferences and verify any advanced settings with your system administrator.
What's the problem? The settings are the ones I've been using for years. This is the only thing in OS X that hasn't worked yet!
Any help would be great.
Cheers,
Phil

Hi,
I just thought I would jump in here because last night I starting having this same problem. I have used Mail for years for my POP accounts (I have about five that I access through the program). I can receive mail; however, I cannot send it. I receive messages like:
"The server response was: relaying mail to hotmail.com is not allowed"
When I try sending the mail through my .mac server, I receive a message that tells me I am not recognized as a .mac member.
However, I can log into my ISP webmail and my .mac account just fine.
I have tried deleting the account and readding it; this hasn't made a difference to the outgoing error message. I use my ISP server to access email, etc. The Server Port Number I use is 110 for the POP accounts and 143 for the .mac, and I have selected None for authentication. There is a discrepancy in server ports. In the general account information settings, the server number is 25; in the advanced account settings, the server number is 110. Changing both numbers to 110 hasn't made a difference, and I cannot alter the port setting in the advanced settings.
Additionally, I can send email to myself or any of my accounts through my ISP--it is only messages to email addresses with different ISP's that I cannot send messages to.
Any ideas?
Thanks.
lsb

Catch RFC Exception message text

Hi Experts,
I am calling a RFC from WebDynpro using adaptive RFC Model.
This RFC returns some Exception message along with the exception key from SAP R/3.
Like this :
MESSAGE e000(ztxx01) WITH 'this is exception message'
RAISING table_not_available.
Now when i am trying to fetch this data in WebDynpro using the following statement:
msgmgr.reportException(ex.getLocalizedMessage(), false);
msgmgr.reportException(ex.getMessage(), false);
I can only see TABLE_NOT_AVAILABLE .
How can i fetch the exception message thrown by RFC?
Regards,
Ashish Shah

Hi Ashish
you can't get the RFC-Messages directly (as i know).
You have to rebuild your
ABAP-Program that the errors will be redirected as a table.
There it gives a structure named 0_return (i don't know exactly) this is the standard table for outgoing error-messages.
Marco

I encountered an error in the Payment Wizard screen as I was creating an Outgoing Payment for petty cash expenses. On the "Recommendation Report" screen, I clicked "Non-Included Trans." and saw that one of the vendors (Vendor Code: WILCO) has the followi

Hello,
I encountered an error in the Payment Wizard screen as I was creating an Outgoing Payment for petty cash expenses. On the “Recommendation Report” screen, I clicked “Non-Included Trans.” and saw that one of the vendors (Vendor Code: WILCO) has the following error:
“The document amount is greater than the max. amount allowed in the payment methods linked to the BP”
Upon checking, the “PCF-W” Payment Method linked to WILCO does not have any restrictions, nor does WILCO have any credit/commitment limit set. I have also appropriately defined the Dummy Business Partner Bank (under Payment Terms) as well as checked the “Included” box for PCF-W on the Payment Run-Payment Methods screen.
Could anyone please help me on this?
Salamat,
Cat

PS - have found other posts indicating that clips smaller than 2s or sometimes 5s, or "short files" can cause this. Modern style editing often uses short takes ! Good grief I cannot believe Apple. Well I deleted a half a dozen short sections and can export, but now of course the video is a ruined piiece of junk and I need to re-do the whole thing, the sound etc. which is basically taking as much time as the original. And each time I re-do it I risk again this lovely error -50 and again trying to figure out what thing bugs it via trial and error instead of a REASONABLE ERROR MESSAGE POINTING TO THE CLIP IT CAN'T PROCESS. What a mess. I HATE this iMovie application - full of BUGS BUGS BUGS which Apple will not fix obviously, since I had this product for a few years and see just hundreds of hits on Google about this error with disappointed users. Such junk I cannot believe I paid money for it and Apple does not support it with fixes !!!
If anyone knows of a GOOD reasonably priced video editing program NOT from APPLE I am still looking for suggestions. I want to do more video in future, but obviously NOT with iMovie !!!

Error doing outgoing payment against A/P Downpayment Request

Hi,
I am working on SAP B1 8.8 PL00(evaluation version). While posting Outgoing Payment against A/P Downpayment Request,system displays following error message-'Invalid Account Code'. It happens for both the payment means-Check as well as Cash. In G/L Account Determination -Purchase Tab-General Tab I have assigned G/L account to 'Down Payment Tax Offset Account'. Also in BP Master following accounts have been assigned-1.Accounts Payable 2.Down Payment Clearing Account.
What could be the reason of the error?Please guide me.
Regards
Sudhir

Dear Sudhir Jadhav,
Apart from the accounts that you have mentioned there is also the Down Payment Interim Account in the General Tab of the Purchasing and Sales tab of the G/L Account Determination.
I have tested the creation of the payment for the Down Payment and at first I could not add it because of an account issue. When I added this account it worked.
Regards,
Marcella Rivi
SAP Business One Forums Team

Outgoing/offline mail server errors (143 /and/ SSL checked?)

i am trying to do this zen and the art of motorcycle maintenance thing where i go through all my umpteen accounts on my desktop and laptop and check all the umpteen settings to try and troubleshoot an outgoing mail server / "offline" errors in mac mail. this seems like it is isolated to mac mail it would be REALLY NICE if there was some organization in here (or at least an explanation) so that all the possible settings (and all the various locations for them) didn't mean this effort is like 35 factorial with respect to possible mistakes that can be made.
/anyway/ i am reading various threads and my ISP service provider recommends port 143 for IMAP but i am seeing threads responses that highly suggest using SSL. however, if i change the checkbox next to the 143 port entry to have SSL checked this automatically changes the port to 993.
now i am not sure whether to replace the 993 with 143 as suggested or to leave off the setting for SSL.
any suggestions so i can isolate this setting from the thousands of variables that could be the cause of this (orther than it being basically embedded in the software and impossible to fix for one reason or another)?
it will be a real pain to change this setting (3 separate steps) on 15 different accounts (45 steps) on two different computers (90 steps for this one single variable) and then have to change it back again.
THANKS

i am trying to do this zen and the art of motorcycle maintenance thing where i go through all my umpteen accounts on my desktop and laptop and check all the umpteen settings to try and troubleshoot an outgoing mail server / "offline" errors in mac mail. this seems like it is isolated to mac mail it would be REALLY NICE if there was some organization in here (or at least an explanation) so that all the possible settings (and all the various locations for them) didn't mean this effort is like 35 factorial with respect to possible mistakes that can be made.
/anyway/ i am reading various threads and my ISP service provider recommends port 143 for IMAP but i am seeing threads responses that highly suggest using SSL. however, if i change the checkbox next to the 143 port entry to have SSL checked this automatically changes the port to 993.
now i am not sure whether to replace the 993 with 143 as suggested or to leave off the setting for SSL.
any suggestions so i can isolate this setting from the thousands of variables that could be the cause of this (orther than it being basically embedded in the software and impossible to fix for one reason or another)?
it will be a real pain to change this setting (3 separate steps) on 15 different accounts (45 steps) on two different computers (90 steps for this one single variable) and then have to change it back again.
THANKS

Error at Outgoing payment and general ledger report

Hi Experts,
I am getting a error while opening Outgoing Payment and General ledger Report, Errors are : "Path Can not be Null, Parameter Name: Path" and "Error code: 100000004, Error: Unknown session" ,respectively.
These errors are only at a particular client machine.
Kindly suggest solution.
Thanks in Advance.
Ashutosh

Hi Jambulingam/Suraj,
I checked the by giving admin rights, also with different user login, but these errors come as and when they want, i have put in this system in observation and wil update this thread accordingly.
There is no citrix server.
Thanks for your reply.
Regards
Ashutosh

Error while saving as draft the outgoing payment

Hi All,
My client is getting an error message "This entry already exists in payment draft OPDF (ODBC)" while saving as draft the outgoing payment. Please advice any solution.
Regards,
Siddiq

Hi Siddiq,
You may check these threads:
Re: This entry already exists in the following tables -Message
This entry already exist tables (DRF1) (ODBC -2035)
Thanks,
Gordon

I can no longer attach files to my outgoing Hotmail emails. I only receive a message that an error has occurred. Help appreciated.

I can no longer attach files to my outgoing Hotmail emails. I only receive a message where I would expect the Upload to appear that an error has occurred.
I am using a MacBook Pro with Retina, 2 Ghz Intel Core i7, OS X 10.9.4
I have no difficulty attaching files to the outgoing Hotmails on the same account using my iPhone.
Help appreciated.

Thanks for this - not an immediate solution I fear but will keep unplugging stuff and restarting stuff.
To try and be clearer about the problem - I have in the last managed to send attachments successfully. Now I can send and receive plain email messages but get the error message when I try to attach an existing file to an email - not just a particular file but it would appear all files are being treated in the same way.
An experiment to send a mail to which an attachment has failed to upload got the following message alongside the SEND button
Files with errors will be removed from the email and not sent.
- but the mail alone was sent and received successfully. Thanks for any pointers you can give me.

TS4002 Can you tell me if the smtp settings have changed recently? I use me/ICloud mail with Outlook and can not receive emails but outgoing emails are no longer working. Error message is: Authentication failed because Outlook doesn't support any of the

I am able to receive messages on my IMac using Outlook but am unable to send. I've had no trouble in the past but began receiving the following messages today.
5.7.8 Bad username or password (Authentication failed).
Authentication failed because Outlook doesn't support any of the available authentication methods.
I am able to send messages using this account on my IPhone and IPad so the IMac is the only place I am having issues. Any advice?

Here are the correct settings. They have never changed since iCloud debuted a year ago.
Server information
IMAP (Incoming Mail Server) information:
Server name: imap.mail.me.com
SSL Required: Yes
Port: 993
Username: [email protected] (use your @me.com address from your iCloud account)
Password: Your iCloud password
SMTP (outgoing mail server) information:
Server name: smtp.mail.me.com
SSL Required: Yes
Port: 587
SMTP Authentication Required: Yes
Username: [email protected] (use your @me.com address from your iCloud account)
Password: Your iCloud password
Note: If you receive errors using SSL, try using TLS instead. SSL is required for both IMAP and SMTP connection with iCloud. POP is not supported by iCloud.

Outgoing error

Similar Messages

Maybe you are looking for