Outline agreements(contracts) - consignment

Hello Experts!
I have following problem and need your help. I have run the report ME80RN (General Analysis of Purchasing documents) for quantity contracts. We have normal and consignment contracts.
Is there any chance that the report shows the values for the consignment contracts as well? Atm the reports shows just 0`s. I know that the prices are in the info records but we would like to know what the expected spend will be.
Thanks for your help.

Excactly. I get the Net Order Values for normal contracts. For consignment contracts there is only a 0.00 in the Net Order Value column for each contract position.
Thanks in advance.

Similar Messages

  • SPRO config field for Material Master & Outline agreement Contracts

    Dear Gurus,
    I want the Field AUTO PO should be mandatory field - for creating New materials - Can you please suggest me in SPRO configuration?
    For outline Agreement ( contracts) - i want to make the Plant field as mandatiry - Can you please suggest me in SPRO configuration?
    Please advice
    Regards
    RS

    Hi,
    Transaction MEKB is for maintaining Condition records, in you PRD server ask concerned to maintain condition record using MEKB for contract and its line item.
    Procedure is
    1. Input in the intial screen is Purchase org, Contract number and relevant line item number and execute
    2. In the following screen highlight the line item and click on create (F6) button in the tool bar (First one from left)
    3. In the following screen inside grid maintain price in amount column agains the condition type
    If you have done the above steps then AUTO should work
    Check on it as eill:-
    Re: pr mandatory for po
    Re: Auto PO in ME59N
    pherasath

  • Outline Agreement (Contract) data does not match with EKPO table.

    Hi,
    I have created a outline agreement(Contract) with net price as 100 / 1 Kg. But when I go to EKPO table in front of Net Price it is reflecting net price as 1 / 1 Kg. So it shows that it is dividing the net price by 100 in Table EKPO. This is happening with the currencies which are maintained in T Code OY04 (Currencies like JPY, CLP, ESP, ITL) with decimals as 0.
    Rest all curriencies which have not maintained in OY04, there is no problem in EKPO as the data matches with Outline Agreement Net Price.
    Request you to please provide the input to resolve the same.
    Thanks & Regards,
    Neeraj Singh

    Hi Neeraj Singh,
    The value of data stored in EKPO depends on the decimal places defined
    for the currency. In standard the decimal places is taken as 2 . Therefore the value will be
    the same as order price if the currency is defined for two decimal
    places ( default is 2 ).
    However, if the decimal places for JPY is defined as zero the table
    will show a value of price /100. If you choose a currency with
    3 decimal places the value in the table will be price * 10 and so on.
    Example:
    Currency                          Decimal places      Order price      Value in EKPO
    SGD                                               2               2000               2000
    NLG                                               2               2000               2000
    JPY                                               0               2000               20
    KWD (Kuwati Dinar)                     3               2000               20000
    ITL                                                 0               2000               20
    All currencies that do not have any decimal places at all
    (TCURX-CURRDEC = 0) must have EKPO-NETPR multiplied by 100.
    Please check SAP notes which may be of help to understand this issue 53206 and 137626
    The issue you reported in not an error but standard.  I hope this information is of help.
    Regards,
    Lorraine
    Edited by: Lorraine Donnelly on Jul 12, 2010 6:57 PM

  • Global Outline Agreement (Contract Create in Backend System)

    Hi All
    We are trying to create contract in backend system automatically. We have implemented the following two BADI.
    BBP_DETERMINE_LOGSYS (SRM 5.0)
    BBP_CTR_BE_CREATE (SRM 5.0)
    But they are not getting triggered, when the contract is created. Just for the sake of confirming this, We put some logic for inserting an entry in the custom table if at the BADI is trigerred. But after the creation of contract there is no entry found in the custome table, hence I believe that the BADI is not getting trigerred.
    My requirement are
    1)  I want this BBP_CTR_BE_CREATE to be triggerred when I click the "Release" button in "Global Outline Agreement".
    2) Pointers how this can be debugged when releasing the outline agreement
    Any help to solve this/ some useful pointer would be highly appreciated.
    Note: I have checked these but did not help much,
    https://forums.sdn.sap.com/click.jspa?searchID=1066187&messageID=1694393
    https://forums.sdn.sap.com/click.jspa?searchID=1066187&messageID=1162212
    Regards
    Kathirvel

    Hi Bala,
    Please see the note
    Note 646903 - Global outline agreement: Tips and tricks.
    This contains details of debugging the GOA transfer BADI.
    Actually you need to make a variable X while starting debugging and then only BADI get trigerred.
    This will solve your issue as debugging seems to be only way for your issue.
    regards,nishant
    please award points if it helps

  • Purchasing Outline Agreement Contracts - Condition values

    Experts,
    My requirement is to get historical condition values from contracts ME33k. I am able to get PB00 condition value from A016, KONH and KONP. Like PB00, there are other conditions defined in contract (example: Frieght, Discount etc). From which tables I can getct the data for those conditions?
    Thank you,
    Nagarajan

    Hi, have you checked old threads for this issue? it seems there are few with "resolved answer" marked...have a look at the bleow thread and try using KONV table also
    PO item Condition Record number and delivery address of PO - Need a table n
    Yogesh
    Edited by: Yogesh Lohiya on Jan 4, 2012 11:46 PM

  • How to find closed contracts/outline agreements

    Dear Experts,
    What criteria is  used  to determine if an outline agreement / contracts  is closed or open?
    Early reply on this much appriciated.
    Thanks in advance.
    cheers
    Good guy

    You must get from the below tcodes
    ME3L, ME3N, ME3M

  • Contracts and Outline agreements

    Dear experts
    What are the tables to look for  if an outline agreement / contracts is closed or open?
    Early reply on this much appriciated.
    Thanks in advance
    Cheers
    Goodguy

    Hi,
    check in tables EKKO, EKPO, EORD.
    Regards,
    Vinod

  • Outline Agreements - min order qty and regular vendor flag

    As a part of E Source Integration with ECC we are planning to leverageusing Outline Agreement(Contract Type MK) to store
    Price and other Business Terms for Material / Vendor combinations. Currently we are
    using Purchase Information Record with minimum order quantity and
    regular vendor flag functionalities, and these are maintained manually.
    We intend to use Minimum Order qty and Regular Vendor Flag
    indicator in Outline Agreement as well, however noticed that these fields are
    not available in the screens. Does anyone know if these fields can be enabled in an outline agreement?

    Guys
    thanks for reply..
    But I thnik my question was not fully clear as the aswers didn't make sense to me...
    As a logistics consultant .I know that I can maintain Min Order qty for a material + vendor at PIR level..
    My question ..if I buy 10 items in a PO from a sinle vendor..is there any option to restrict Min qrder qty for these combination of materials..
    or in other words vendor says he dont care about number of items ,but the lot lot should be min..10 cartons only..
    appropriate points will be rewarded.
    thanks in advance.

  • Global outline agreements and contracts

    Hi,
    Can anybody give me a step by step explanation of how to configure and distribute contracts and global outline agreements to the backend system. Also the T-codes used to access the contracts in the backend once the contracts have been distributed.
    Happy New Year 2006 to the community !!!
    Regards
    Sunny

    Hi Sunil,
    I am not sure how are you creating your GOA in SRM. SRM Sourcing Business Config guide has lot of info on this. Here is some in brief.
    GOA can be created manually or from Sourcing itself or from Sourcing involves Bidding or Auction.
    I assume You are creating manually GOA in SRM.
    1. You have to decide what type of Ctr you want to distribute. You can distribute as Qty Ctr or Value Ctr or Scheduling Agreement.
    2. Define Doc type for each of these in Define Transaction type in SRM and assign Int number range.
    3. Define same in R/3 and create same number range as Ext and assign type.
    4. You have to code R/3 BADI BBP_CTR to determine next number for CTR distributed from SRM using new number range object.
    5. You need to partner profile in R/3 to receive IDoc from SRM.
    6. Distribute GOA from SRM using Distribute function.
    7. You can see the CTRs in ME33K amd ME33L in R/3.
    Ctrs are distributed thru IDoc using qRFC. You can use IDoc standard tools to troublshoot any issues during IDoc posting.
    There are tools to monitor qRFC issues. Use SMQ1 in SRM to analyse the probelm.
    Thanks,
    Jay

  • FM for MM Contracts (outline agreements)

    Hi everybody !
    I need your precious help...
    I have to change regulary the price conditions (PB00) for some items in contracts, and I wanted to know if there was a function module or a bapi that could do that, and, is there an FM or a BAPI that could add some items in (known) contracts ?
    Thanks a lot,
    E.Briot.

    Hi,
    Use BAPI BAPI_CONTRACT_CREATE
    Check this thread for sample code
    How to implement create outline agreement ( ME31K) in ABAP
    Regards,
    Satish

  • Difference - Outline Agreement , Scheduling Agrrement , Contract

    Hi all...
    Can anyone of you please explain whats the main difference between Outline Agreement , Scheduling Agrrement and  Contract and when & where are these used.
    Thanks
    Balaji

    Hi
    Contracts and SA...both are called as Outline Agreements...
    the main Diff.bet Contracts and SA..
    1)The Conditions maintained in Contracts are always Time Dependent....where as you can maintain floating conditions in SA.(Controled by Doc.Type)
    2)Based on contract you cannot do GR Directly....ie)you have to separately send Release Order by referring Contracts and based on these release orders only you can do GR....
       whereas in SA, after releasing SA...you can do GR based on these SA...
    3)The Individual delivery lines of the Release orders of the Contracts will not be effective.....where as Individual Delivery lines of the SA are Effective...
    Reward if useful
    Regards
    S.Baskaran

  • Vendor Contract -----Outline agreement

    can anybody send me help docs for outline agreement?//////////
    or step by step process in SAP......
    Thanks in advance
    Shuva

    Hi
    outline agreement can be contract and scheduleing agreements...
    Both are used for long time periods...
    For eg in schedule agreement, there are schedule stored ie. no. of dates for which the qty is req. in the industry....
    both can be used as a perdoc for the generation of the PO...
    but there is an added advantage, with schdule agreement we can have further del. schedule generated even if the further req. is seen....but in contracts you need to generated new contract release order for every new requirement....
    For further details pls check the link:
    http://help.sap.com/saphelp_erp2004/helpdata/EN/75/ee0fa855c811d189900000e8322d00/frameset.htm
    Thanks
    Vivek

  • Global outline agreement and Delivery schedule

    Hi experts.
    I am in SRM 5.5, ECC 5.0 as backend in ECS.
    I would like to have some information about relation between Global outline agreement and Delivery schedule of ECC.
    Can I create GOAs and replicate to ECC as Delivery schedule for automatic generation of schedule lines?
    The schedule lines generated afted MRP run goes to SRM or only goes to SUS if required?
    Thanks
    Nilson

    Hi Nilson,
    The data contained within the global outline agreement is distributed as purchasing contracts or scheduling agreements to the backend systems of the release-authorized purchasing organizations of the relevant corporate group. These purchasing organizations can then use the purchasing contracts or scheduling agreements according to the terms agreed centrally within the global outline agreement.
    For more details.
    http://help.sap.com/saphelp_srm50/helpdata/en/42/f93dfd975f3ee6e10000000a1553f7/frameset.htm
    Nishant

  • Function Module for outline agreement

    Dear Sir,
    I want to know the function module for contract/outline agreement from where I can fetch the details of release orders against the given contract.
    Regards
    Amit Agarwal

    Hi
    Go to SE37 enter the Outline agreement and press F4
    you can see the function module
    (or) Post the same message in  SAP ABAP forum
    G.Ganesh Kumar

  • Global Outline Agreement Distribution

    Hello,
    i try to distribute global outline agreement ( transaction type GCTR ) from SRM 4.0 to ERP 2004.
    But I can´t find in my browser ( its service = bbp_ctr_main ) the header data "Distribution".
    I see in my header data only following taps:
    Basic Data / Documtents / Conditions / Output Logs / Status / Approval Preview
    I set up following things till now:
    - IDoc type = BLAREL02 as Inbound Processing in SRM System
    - IDoc type = BLAREL02 as Outbound Processing in Backend System
    - transaction type = GCTR with internale number range in SRM System
    - transaction type = GCTR with external number range in Backend System
    - BADI:  BBP_CTR_BE_CREATE in Method: CONTRACT_PROCESS_TYPE_FILL
       EV_PROCESS_TYPE = 'GCTR'.
    - BADI: BBP_DETERMINE_LOGSYS in Method: CONTRACT_LOGSYS_DETERMINE
       CV_LOGSYS = 'our Backend System'.
    - PPOMA_BBP  - Attributes; Tab: Function -under Local I mapped the Purchasing Organisation and the
       Purchasing Group with Backend System
    *Which customizing is still missed to see this tab "Distribution" in the header data?!
    Would be glad if someone could help.
    Best Regards
    J.F.

    If you really want to do GOA, you've got the wrong service (CTR_MAINCC is the one you are looking for). The role stratpurchaser* has both transactions: contract and global outline.
    BBP_DETERMINE_LOGSYS does not need to be implemented, BBP_CTR_CREATE_BE neither (maybe for condition mapping!).
    You are missing blaord for replication to ECC from SRM, you are missing BBP_SRV if you want to make GOA for services.
    Along the way you will probably find that some other things need to be customised in ECC (setting up of global company, some other minor stuff like company code that's missing in ECC).
    So basically you don't miss any customising for seeing the tab, but for replicating GOA you DO miss something.
    In the Wiki section for SRM on this site you can find the configuration guide for setting up of contracts and GOAs, if you follow that you will have done around 90-95% of all necessary steps.
    Regards,
    Robin

Maybe you are looking for

  • How can I remove default alarm for events in iCal on devices ios?

    Whenever I add an event to my iCal calendar in Mounain Lion it will automatically add one default alert only on my iphone and ipad. These default alarms are not displayed on my macbook or icloud.com Default alarms are disabled in macbook, icloud.com,

  • No audio output device is installed - Satellite C855D-S5950 - Windows 8 64-bit

    Toshiba laptop Model: Satellite C855D-S5950 P/N: PSCBQU-03G03E OS: Windows 8 64bit RAM: 4GB. Hello, I have my friend’s Toshiba Satellite C855D-S5950 with Windows 8 (64bit) that about a year old.  Some months ago the sound stopped working.  He asked m

  • My itunes wont open. Ive tried everything.

    I was updating my phone and it disconnected and now my itunes wont open and plus my phone is still in recovery mode. Ive tried everything, someone help

  • G4 iBook and extended desktop

    I am using my G4 iBook to connect to a projector for presentations and have noticed that MS PowerPoint 2004 allows projecting of the current slide whilst I can see next and previous slides on my iBook screen. However in order to do this I have to swi

  • Epson artisan 810 communication server error

    I cannot conect to the printer! I have an Airport and it is the only think that is not showing up! It was on there and then I deleted it because it kept giving me a communication error. I thouht deleting it and reinstaling it would help. NOPE, Still