Outlook 2007 on XPsp2 OEM unable to connect to Exchange Server 2003??

Hi
My outlook 2007 came part and package of the Microsoft Office 2007 Enterprise Edition, and our SBS server runs Exchange 2003.
After setting up the connection in Outlook to connect too Exchange (when clicking test (check name) on configuration it is successful) --
The Error Message is so upon start up :
Cannot Open your Default e-mail Folders, You must connect to microsoft exchange with the current user profile before you can synchronize your folders with your offline folder file..
When disabling the cached exchange mode the error message changes however, but it is still unable too actually open outlook.
Cannot open your default E-Mail Folders. The Attempt too log on to the exchange server failed... (after in the configuration the test suceeded.)
The computer has a fresh copy of XP SP2 OEM, as well as Microsoft Outlook, only other software on is SQL server 2000 (All microsoft Updates installed). The active user is domain controlled and has the same credentials as is used by Exchange.
After selecting the checkbox under Control Panel -> Mail -> ......... "User Identification" -> Always prompt for login credentials no change is made to this error....
I then disabled the use of offline folders..... "could not open your default email folders. The information store could not be opened"
Please provide assistance in any way possible.... ASAP as well if possible.
Thanks a lot
Marc

GedMarc,
I had all the same problems you had, and did the exact same things you did to no avail.
This is what solved my problem:
http://support.microsoft.com/kb/913843
1.
Click Start, click Run, type regedit in the Open box, and then click OK.
2.
Locate and then click the following subkey:
HKEY_CURRENT_USER\Software\Microsoft\Office\12.0\Outlook\RPC
3.
On the Edit menu, point to New, and then click DWORD Value.
4.
Type DefConnectOpts, and then press ENTER.
5.
Right-click DefConnectOpts, and then click Modify.
6.
In the Value data box, type 0, and then click OK.
7.
Exit Registry Editor.
Best regards,
T

Similar Messages

  • Why can't I connect to Exchange Server 2003? I'm using OS Lion. My iphone connects, what am I doing wrong?

    Why can't I connect to Exchange Server 2003? I'm using OS Lion. My iphone connects, what am I doing wrong?

    the iPhone uses active sync. Desktop clients do not. Desktop clients use another exchange protocol (which i can't remember as i'm not a microsofty).
    Just because you can access via active sync doesn't mean you can access it by other methods, and vice versa.

  • Outlook client in different subnet unable to connect to Exchange 2010 CAS using Windows 2008 R2 NLB multicast mode

    Hi all,
    need urgent assistance on the following issue
    this is my Exchange 2010 setup
    2 x CAS/Hub servers with HP network teaming, and load balanced using Windows NLB multicast mode. There are 2 VIPs on the NLB, one for outlook anywhere, one for autodiscover
    2 DNS records were created for the 2 VIPs
    Clients use Outlook Anywhere (HTTPS) to connect to the CAS servers from external segment via a Palo Alto firewall, which also acts as a layer 3 router
    static arp was set on the Palo Alto firewall, with both virtual MACs pointing to the primary virtual MAC used by the NLB. 
    Observations
    1. within same segment - no issue accessing Exchange servers, even when one CAS node is offline
    2. external segment (via firewall)
    a. when both nodes are up
    outlook client able to connect to Exchange CAS VIP on 443, but will disconnect after around 30 seconds. Client will retry and the pattern will repeat
    Exchange CAS RPC logs shows client connections and disconnections to the outlook anywhere VIP address
    Firewall logs shows allowed traffic from client to the VIPs
    unable to complete profile creation
    b. with only CAS2 (CAS1 stopped/deleted from NLB cluster)
    no issues accessing Exchange servers, creating profiles etc
    c. with only CAS1
    same behaviour as (a)
    reinstalled NLB, but doesn't resolve
    deleted CAS1 from NLB cluster, and re-add. issue remain
    Q1. is teaming supported? Teaming is currently set to automatic mode, instead of specified Fault Tolerant
    Q2. are there additional settings we need to set or verify on the Palo Alto firewall, since the issue only happen to external segment? Thanks!

    Yes - I've been scarred with this for many years :(
    If it is just CAS 1 that is causing issues, then focus in on that.  The support statement for Win 2008 R2 is that NLB is still a 3rd party component and support may ask for it to be disabled.
    http://support.microsoft.com/kb/278431 
    Does CAS1 and CAS2 have the same NICs (firmware as well), driver, teaming software, and teaming config? 
    I also want to ask what the network team did for configuring the switch ports on the servers?  This will vary from vendor to vendor  - did they do the same config on both?
    Cheers,
    Rhoderick
    Microsoft Senior Exchange PFE
    Blog:
    http://blogs.technet.com/rmilne 
    Twitter:   LinkedIn:
      Facebook:
      XING:
    Note: Posts are provided “AS IS” without warranty of any kind, either expressed or implied, including but not limited to the implied warranties of merchantability and/or fitness for a particular purpose.
    Thanks Rhoderick, issue still persists
    can you also help clarify what you meant by "configuring the switch ports on the servers"?
    thanks again

  • Outlook 2013 repeatedly prompts for password when connecting to Exchange Server 2010

    I am trying to configure Outlook 2013 on a Windows 8.1 Pro client.  The exchange server is 2010 SP1 and works just fine with OL 2010.
    When I configure OL 2013, the configuration prompts for a password for the account repeatedly with both NTLM and Basic Authentication chosen.  OL 2013 tries to connect and then it disconnects with the password for the account repeatedly prompted. When
    the credentials are entered, the prompt reappears immediately.
    Might anyone help?
    Many thanks in advance
    Shuvo

    Hi Shuvo,
    Please check whether this user can access mailbox in OWA. Please manual setup this account in Control Panel to have a try. Make sure your
    Server name and User name are configured correctly. If you are configure the account in internal domain environment, please click
    More Settings, set Negotiate Authentication in
    Security tab and uncheck Connect to Microsoft Exchange using HTTP in Connection tab.
    If there is any updates, please feel free to let us know.
    Thanks,
    Winnie Liang
    TechNet Community Support

  • Suddenly Unable to Connect to Exchange Server

    I set my iphone 3g without with our ms exchange server. I had no problems. Sending, receiving, calendar, and contacts all worked perfectly for weeks. One day it just stopped working. I receive "Cannot Get Mail - The connection to the server failed" when trying to check for mail, and "Cannot Send Mail - An error occured while delivering this message." when trying to send.
    *Here's what I've tried:*
    - Hard reset
    - Changed password and then update it in iphone email setup
    - Confirming all settings are correct (against a co-worker with the same phone)
    - Trying alternate settings (specifying alternate server names, including the domain, including the domainname\username in the user name field)
    - Moving all emails to an archive folder, then attempting to connect with iphone
    - Deleting the account from the iphone and re-entering it (this just caused me to loose all of my existing emails and calendar appts from viewing)
    - Resetting the iphone
    - Resetting the iphone, and setting up the email account again without restoring
    - I can browse to web mail using safari on the iphone, and log in successfully
    - Just to test, I have defined an incorrect password in the iphone email setup and I do receive an incorrect password error (same thing happens when I remove the domain name from the domain name field).
    Any other ideas?

    Thanks,
    I had tried that a few times but no luck. I also tried restarting it. It is strange that my other accounts work fine.
    Thank you though

  • Losing connection with Exchange Server (2003)

    The cause of losing the connection is me disabling the Users Accounts in our MS Domain for Maintenance on the Network.
    I assume there must be a certain amount of time where the iPhone trys to connect to the exchange server and then time's out or something like that.
    Too get the connection back is usually a restart, turn off on on wifi or airplane mode or reenter the account password.
    Any ideas on how I can still disable the user accounts and not have the iPhone's lose their connection or time out?

    I don't think this is possible. I use Exchange server at work, so I can tell you what it will do:
    - You can do "over the air" IMAP e-mail to your exchange server (if your IT dept supports it)
    - You can desktop sync your appointments and edit the from the phone (Edit from phone means view notes, times, etc -- you cannot change attendees, etc.)

  • Problem in connecting to exchange server

    I have generated a certificate as specified in the link http://www.dylanbeattie.net/docs/openssl_iis_ssl_howto.html. It generates an X.509 certificate. I installed this certificate on pop3 server on Microsoft exchange server. I also installed the certificate on client m/c. On client m/c, a Java application is running, which tries to read mails from exchange server using SSL. But this exception occurs when I run my java application:
    javax.mail.MessagingException: Connect failed;
    nested exception is:
    javax.net.ssl.SSLHandshakeException: sun.security.validator.ValidatorException: PKIX path building failed: sun.security.provider.certpath.SunCertPathBuilderException: unable to find valid certification path to requested target
    at com.sun.mail.pop3.POP3Store.protocolConnect(POP3Store.java:106)
    at javax.mail.Service.connect(Service.java:234)
    at ci.cryopull.core.PullAction.execute(Unknown Source)
    at ci.cryopull.core.PullAgent.run(Unknown Source)
    at java.lang.Thread.run(Thread.java:595)
    It seems I am unable to connect to exchange server using this certificate. While I also tried a free trial certificate from thawte, that worked fine. Could u help resolving my problem?
    Thanks

    Peddard, you will have to be more specific on your settings. It's important to note that the iPhone's host name entry must resolve both internally and externally if it's going to work correctly. So, on your internal DNS server, you must make a mail entry with the same name as what you are publishing externally. In my case, mail.domainname.com is registered on our external DNS server with a public IP address. On the internal DNS server, mail.domainname.com registers to a 192.168.x.x address.
    However, you can find in another post that in my situation, the iPhone would not work correctly on our LAN. It worked everywhere else but the issue seems to be that when on the Edge network and the LAN, there is conflicting DNS resolution. This was intermittent and unreliable at best.
    Our workaround was to create a second network, simply wirelessly with a couple of Airport Extreme Base stations on a separate external IP address. Now, DNS resolved to the external address and it works like a charm. Not a fix, but a workaround.
    JD

  • Can't connect to exchange server after 1/4/2011 am update - anyone else?

    Woke up this am and phone is unable to connect to exchange server for email. Last email received was @4:35am. I've reentered my password to confirm and exchange is working fine on Desktop. Any suggestions?

    I'm pretty sure that the combination is right. On my macs everything works fine. Is there another reason why the exchange server could reject the iPhone? Similar to the 3.1 problems with the hardware encryption?

  • Connect my Exchange server via Wifi and EA6500

    Hello, I have a problem. Since I have installed my new router, a Linksys EA6500, I have many problems to connect to my Exchange Server, which is located in my house, via Wifi. I tried to synchronize my Iphone and my Samsung tablet but it won't work. Most of the times I get the message that the Exchange server cannot be connected. When I turn off my Wifi en connect via my mobile provider I have no problems. When I am on a third party wifi I also can connect my server. Seems my own wifi causes lots of problems. My old router, a Dlink dir655, never had this problems. Can anyone help me?

    Make sure that you have replicated the settings of your old router to the settings of the new router and then try also to isolate this problem by using a laptop computer and check if it will work. The purpose of using a laptop is order for you to isolate if the problem is with the router’s firmware. Check if opening port 443 on your router will be able to fix this issue. You can also check the links below for further information about this concern.
    http://community.spiceworks.com/topic/205984-unable-to-connect-to-exchange-server-from-mobile-device...
    https://discussions.apple.com/thread/3413395?start=15&tstart=0

  • Error calling report FRM-41213 unable to connect to Report Server

    Hi,
    I have installed Oracle Database 10g R2 and Oracle Developer 10gR2.
    I installed it in both Windows 2000 SP4 and Windows XP SP2.
    I would like to call a Report using a button inside Oracle Form.
    I create my own Report Server, using : rwserver server=repsrv
    A Java-based window appear OracleAS Reports Sevice, and showed that repsrv is ready.
    In Form (inside a button -> WHEN-BUTTON-PRESSED) :
    1. Using RUN_REPORT_OBJECT()
       rep_id := find_report_object('REPORT10');
         if not id_null(rep_id) then
           v_rep := run_report_object(rep_id);
         else
              message('Null');
       end if;
       a. If I did not specify the name of the Report Server in Reports node of Form's property object
    (I leave it blank)
    The following error appear :
    FRM-41211: Integration error, SSL failure running another product
    b. If I specify the name of the Report Server : repsrv
    The following error appear :
    FRM-41213: Unable to connect to Reports Server repsrv
    2. Using WEB.SHOW_DOCUMENT()
    a. If did not I specify the server name in the parameter
    WEB.SHOW_DOCUMENT('http://localhost:8889/reports/rwservlet/getjobid'|| SUBSTR(v_rep,INSTR(v_rep,'_',-1)+1)||'?'||,'_blank');Another web browser appear and the following error appear :
    REP-51002: Bind to Reports Server rep_<computer_name> failed
    b. If I specify the server name in the parameter --> server='repsrv'
    WEB.SHOW_DOCUMENT('http://localhost:8889/reports/rwservlet/getjobid'|| SUBSTR(v_rep,INSTR(v_rep,'_',-1)+1)||'?'||'server=repsrv','_blank');Another web browser appear and the following error appear :
    REP-51002: Bind to Reports Server repsrv failed
    In Report :
    If I try to navigate manually to :
    1. http://localhost:8889/reports/rwservlet using web browser.
    It showed OracleAS Report Services - Servlet Command Help page.
    2. http://localhost:8889/reports/rwservlet?userid=scott/tiger@orcl&report=D:\PRACTICE\FORM\MODULE1.JSP&destype=cache&desformat=html
    The following error occured
    REP-51002: Bind to Reports Server rep_<computer_name> failed
    3. Finally,
    http://localhost:8889/reports/rwservlet?server=REPSRV&userid=scott/tiger@orcl&report=C:\PRACTICE\FORM\MODULE1.JSP&destype=cache&desformat=html
    The following error occured
    REP-51002: Bind to Reports Server repsrv failed
    4. Any attempt to different command (i.e showenv, showjobs, etc) seems failed
    If I did not specify the server then REP-51002: Bind to Reports Server rep_<computer_name> failed
    If I specify the server - 'repsrv' then REP-51002: Bind to Reports Server repsrv failed
    5. I have tried to use rwrun in command line.
    rwrun report="D:\My Documents\form\module1.jsp" userid=scott/tiger@orcl destype=file desformat=pdf desname="D:\My Documents\form\module2.pdf"
    The PDF file created and it looks exactly as the web layout as in Oracle Report Builder (Run Web Layout CTRL-R)
    Question :
    1. What supposed to be done?
    The Report server is ready, but the web browser seems unable to connect to Report Server.
    2. Can we used or call or executed an executable command line from Form (using PL/SQL inside button)?
    Any help would be grateful.
    Many thanks,
    Buntoro

    Hi,
    Problem solved.
    I got the solution from another post.
    Re: REP-51002: Bind to Reports Server rep failed
    Here are the step I did.
    Note : Please make backup for the following file : rwnetwork.conf
    - In file rwnetwork.conf, remove or commented the following
    <multicast channel="228.5.6.7" port="14021" timeout="1000" retry="3"/>
    - And then uncommented
    <namingService name="Cos" host="%NAMING_HOST%" port="%NAMING_PORT%"/>
    - replace the
    %NAMING_HOST% with your computer name or specify an IP address
    %NAMING_PORT% with 14021
    It should look like this :
    <namingService name="Cos" host="blahblah" port="14021"/>
    - I did not change the : name="Cos", since I do not understand what does it for
    - Save you changes.
    - Start the OC4J.
    - Find the location of : namingservice.bat (on Windows platform)
    - execute in the command line : namingservice.bat 14021
    - finally start the report in the web browser
    Note:
    To shutdown the namingservice, use : namingservice.bat 14021 shutdown
    Regards.
    Buntoro

  • [Solved] Samba log spam: Unable to connect to CUPS server

    Hi everyone,
    I'm running into an annoying issue with samba. I don't have any printers installed, and probably won't. However smbd complains to no end in /var/log/errors.log about not being able to connect to a cups server:
    Apr 18 12:30:05 asakura nmbd[4361]: *****
    Apr 18 12:30:05 asakura nmbd[4361]:
    Apr 18 12:30:05 asakura nmbd[4361]: Samba name server ASAKURA is now a local master browser for workgroup MYGROUP on subnet 192.168.1.121
    Apr 18 12:30:05 asakura nmbd[4361]:
    Apr 18 12:30:05 asakura nmbd[4361]: *****
    Apr 18 12:32:22 asakura smbd[4552]: [2009/04/18 12:32:22, 0] printing/print_cups.c:cups_connect(103)
    Apr 18 12:32:22 asakura smbd[4552]: Unable to connect to CUPS server localhost:631 - Connection refused
    Apr 18 12:32:22 asakura smbd[4553]: [2009/04/18 12:32:22, 0] printing/print_cups.c:cups_connect(103)
    Apr 18 12:32:22 asakura smbd[4553]: Unable to connect to CUPS server localhost:631 - Connection refused
    Those last two lines get spammed constantly.
    I've done a little bit of research into the matter, and followed the steps here to try to resolve the problem: http://www.davekb.com/browse_computer_t … server:txt
    Unfortunately it doesn't appear to make any difference.
    Here is my /etc/samba/smb.conf:
    # This is the main Samba configuration file. You should read the
    # smb.conf(5) manual page in order to understand the options listed
    # here. Samba has a huge number of configurable options (perhaps too
    # many!) most of which are not shown in this example
    # For a step to step guide on installing, configuring and using samba,
    # read the Samba-HOWTO-Collection. This may be obtained from:
    # http://www.samba.org/samba/docs/Samba-HOWTO-Collection.pdf
    # Many working examples of smb.conf files can be found in the
    # Samba-Guide which is generated daily and can be downloaded from:
    # http://www.samba.org/samba/docs/Samba-Guide.pdf
    # Any line which starts with a ; (semi-colon) or a # (hash)
    # is a comment and is ignored. In this example we will use a #
    # for commentry and a ; for parts of the config file that you
    # may wish to enable
    # NOTE: Whenever you modify this file you should run the command "testparm"
    # to check that you have not made any basic syntactic errors.
    #======================= Global Settings =====================================
    [global]
    # workgroup = NT-Domain-Name or Workgroup-Name, eg: MIDEARTH
    workgroup = MYGROUP
    # server string is the equivalent of the NT Description field
    server string = Samba Server
    # Security mode. Defines in which mode Samba will operate. Possible
    # values are share, user, server, domain and ads. Most people will want
    # user level security. See the Samba-HOWTO-Collection for details.
    security = user
    # This option is important for security. It allows you to restrict
    # connections to machines which are on your local network. The
    # following example restricts access to two C class networks and
    # the "loopback" interface. For more examples of the syntax see
    # the smb.conf man page
    ; hosts allow = 192.168.1. 192.168.2. 127.
    # If you want to automatically load your printer list rather
    # than setting them up individually then you'll need this
    load printers = no
    # you may wish to override the location of the printcap file
    ; printcap name = /etc/printcap
    # on SystemV system setting printcap name to lpstat should allow
    # you to automatically obtain a printer list from the SystemV spool
    # system
    ; printcap name = lpstat
    # It should not be necessary to specify the print system type unless
    # it is non-standard. Currently supported print systems include:
    # bsd, cups, sysv, plp, lprng, aix, hpux, qnx
    ; printing = cups
    # Uncomment this if you want a guest account, you must add this to /etc/passwd
    # otherwise the user "nobody" is used
    ; guest account = pcguest
    # this tells Samba to use a separate log file for each machine
    # that connects
    log file = /var/log/samba/%m.log
    # Put a capping on the size of the log files (in Kb).
    max log size = 50
    # Use password server option only with security = server
    # The argument list may include:
    # password server = My_PDC_Name [My_BDC_Name] [My_Next_BDC_Name]
    # or to auto-locate the domain controller/s
    # password server = *
    ; password server = <NT-Server-Name>
    # Use the realm option only with security = ads
    # Specifies the Active Directory realm the host is part of
    ; realm = MY_REALM
    # Backend to store user information in. New installations should
    # use either tdbsam or ldapsam. smbpasswd is available for backwards
    # compatibility. tdbsam requires no further configuration.
    ; passdb backend = tdbsam
    # Using the following line enables you to customise your configuration
    # on a per machine basis. The %m gets replaced with the netbios name
    # of the machine that is connecting.
    # Note: Consider carefully the location in the configuration file of
    # this line. The included file is read at that point.
    ; include = /usr/local/samba/lib/smb.conf.%m
    # Configure Samba to use multiple interfaces
    # If you have multiple network interfaces then you must list them
    # here. See the man page for details.
    ; interfaces = 192.168.12.2/24 192.168.13.2/24
    # Browser Control Options:
    # set local master to no if you don't want Samba to become a master
    # browser on your network. Otherwise the normal election rules apply
    ; local master = no
    # OS Level determines the precedence of this server in master browser
    # elections. The default value should be reasonable
    ; os level = 33
    # Domain Master specifies Samba to be the Domain Master Browser. This
    # allows Samba to collate browse lists between subnets. Don't use this
    # if you already have a Windows NT domain controller doing this job
    ; domain master = yes
    # Preferred Master causes Samba to force a local browser election on startup
    # and gives it a slightly higher chance of winning the election
    ; preferred master = yes
    # Enable this if you want Samba to be a domain logon server for
    # Windows95 workstations.
    ; domain logons = yes
    # if you enable domain logons then you may want a per-machine or
    # per user logon script
    # run a specific logon batch file per workstation (machine)
    ; logon script = %m.bat
    # run a specific logon batch file per username
    ; logon script = %U.bat
    # Where to store roving profiles (only for Win95 and WinNT)
    # %L substitutes for this servers netbios name, %U is username
    # You must uncomment the [Profiles] share below
    ; logon path = \\%L\Profiles\%U
    # Windows Internet Name Serving Support Section:
    # WINS Support - Tells the NMBD component of Samba to enable it's WINS Server
    ; wins support = yes
    # WINS Server - Tells the NMBD components of Samba to be a WINS Client
    # Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
    ; wins server = w.x.y.z
    # WINS Proxy - Tells Samba to answer name resolution queries on
    # behalf of a non WINS capable client, for this to work there must be
    # at least one WINS Server on the network. The default is NO.
    ; wins proxy = yes
    # DNS Proxy - tells Samba whether or not to try to resolve NetBIOS names
    # via DNS nslookups. The default is NO.
    dns proxy = no
    # These scripts are used on a domain controller or stand-alone
    # machine to add or delete corresponding unix accounts
    ; add user script = /usr/sbin/useradd %u
    ; add group script = /usr/sbin/groupadd %g
    ; add machine script = /usr/sbin/adduser -n -g machines -c Machine -d /dev/null -s /bin/false %u
    ; delete user script = /usr/sbin/userdel %u
    ; delete user from group script = /usr/sbin/deluser %u %g
    ; delete group script = /usr/sbin/groupdel %g
    #============================ Share Definitions ==============================
    ; [homes]
    ; comment = Home Directories
    ; browseable = no
    ; writable = yes
    # Un-comment the following and create the netlogon directory for Domain Logons
    ; [netlogon]
    ; comment = Network Logon Service
    ; path = /usr/local/samba/lib/netlogon
    ; guest ok = yes
    ; writable = no
    ; share modes = no
    # Un-comment the following to provide a specific roving profile share
    # the default is to use the user's home directory
    ;[Profiles]
    ; path = /usr/local/samba/profiles
    ; browseable = no
    ; guest ok = yes
    # NOTE: If you have a BSD-style print system there is no need to
    # specifically define each individual printer
    ; [printers]
    ; comment = All Printers
    ; path = /var/spool/samba
    ; browseable = no
    # Set public = yes to allow user 'guest account' to print
    ; guest ok = no
    ; writable = no
    ; printable = yes
    # This one is useful for people to share files
    ;[tmp]
    ; comment = Temporary file space
    ; path = /tmp
    ; read only = no
    ; public = yes
    # A publicly accessible directory, but read only, except for people in
    # the "staff" group
    ;[public]
    ; comment = Public Stuff
    ; path = /home/samba
    ; public = yes
    ; writable = yes
    ; printable = no
    ; write list = @staff
    # Other examples.
    # A private printer, usable only by fred. Spool data will be placed in fred's
    # home directory. Note that fred must have write access to the spool directory,
    # wherever it is.
    ;[fredsprn]
    ; comment = Fred's Printer
    ; valid users = fred
    ; path = /homes/fred
    ; printer = freds_printer
    ; public = no
    ; writable = no
    ; printable = yes
    # A private directory, usable only by fred. Note that fred requires write
    # access to the directory.
    ;[fredsdir]
    ; comment = Fred's Service
    ; path = /usr/somewhere/private
    ; valid users = fred
    ; public = no
    ; writable = yes
    ; printable = no
    # a service which has a different directory for each machine that connects
    # this allows you to tailor configurations to incoming machines. You could
    # also use the %U option to tailor it by user name.
    # The %m gets replaced with the machine name that is connecting.
    ;[pchome]
    ; comment = PC Directories
    ; path = /usr/pc/%m
    ; public = no
    ; writable = yes
    # A publicly accessible directory, read/write to all users. Note that all files
    # created in the directory by users will be owned by the default user, so
    # any user with access can delete any other user's files. Obviously this
    # directory must be writable by the default user. Another user could of course
    # be specified, in which case all files would be owned by that user instead.
    ;[public]
    ; path = /usr/somewhere/else/public
    ; public = yes
    ; only guest = yes
    ; writable = yes
    ; printable = no
    # The following two entries demonstrate how to share a directory so that two
    # users can place files there that will be owned by the specific users. In this
    # setup, the directory should be writable by both users and should have the
    # sticky bit set on it to prevent abuse. Obviously this could be extended to
    # as many users as required.
    ;[myshare]
    ; comment = Mary's and Fred's stuff
    ; path = /usr/somewhere/shared
    ; valid users = mary fred
    ; public = no
    ; writable = yes
    ; printable = no
    ; create mask = 0765
    [shared]
    path = /media/shared
    valid users = foosoft
    public = no
    writable = yes
    [tomato]
    path = /media/data1/tomato
    valid users = foosoft
    public = no
    writable = yes
    show add printer wizard = no
    printing = none
    printcap name = /dev/null
    disable spoolss = yes
    I'm totally out of ideas here, anyone have a tip on what I could try next?
    Last edited by FooSoft (2009-04-18 19:52:28)

    glad you posted it first i had the same problem.
    However, samba was complaining that
    printing = none
    was invalid. I removed that line and it works great.
    thanks
    Last edited by lio (2009-10-16 00:20:14)

  • There is a problem with the server's security certificate. The security certificate is not from a trusted certifying authority. SAP Business One is unable to connect to the server

    Hello,
    I have an issue with connecting client SB1H on Windows, the scenario is as follows:
    1.- Server:
         Suse Linux Enterprise Server 11.3 kernel version: 3.0.76-0.11 IBM
         NDB and Server are review 69 SP06
    2.- Client:
         Windows 8 Pro Virtual Machine on Microsoft Hyper-V
         SB1H PL 11 version 32bits    
         SAP HANA Studio version 1.0.60
    When I run SB1H the following message appears:
    There is a problem with the server's security certificate. The security certificate is not from a trusted certifying authority. SAP Business One is unable to connect to the server.
    Any idea what could be the solution?

    Hi,
    Please check SAP notes:
       1993392 - Server components setup wizard: New default values for certificates and single sign-on option
    1929288 - Do not configure SSL for XApp during installation or upgrade if XApp is installed on a different machine than the SAP HANA server
    Thanks & Regards,
    Nagarajan

  • Outlook connection to exchange server problem

    We have a new domain and an existing exchange server. The problem is if i log in with a local computer account i can autodiscover and connect in cached mode to exchange no problem. If i then login with a domain user account the same computer (tried on other
    workstations) will fail to auto discover, fail to connect to exchange even with manual settings. I cant find anything obvious in Group policy.
    The server is setup with the latest 2013 Group policy templates with office 2013 templates
    Users not logged in with the new AD server can connect to exchange 
    Users not logged into the domain can access exchange server
    My feeling is its a local setting that is missing or needs to be changed in Group Policy but i am at a loss as to what it could be
    I have disabled roaming profiles too and it makes no difference.
    Any help would be greatly appreciated.
    Steve

    Hi,
    Sorry for my delay. According to your description, I summarize your issue to the following points:
    1. No problem when the user logs in Outlook with a local computer account in Cached mode.
    2. Can’t connect to Exchange from an cache mode enabled Outlook 2013 client when using a domain user account on the same computer automatically or manually.
    3. Can connect to Exchange from an online mode enabled Outlook 2013 client when using a domain user account on the same computer automatically or manually.
    It is right? If I misunderstand, please feel free to point it out. Additionally, I noticed that the server is setup with the latest 2013 Group policy templates with office 2013 templates. Please confirm
    if the Outlook cache mode is disabled by OTC or GPO. If there is following registry key applied on the machine:
    Software\Microsoft\Office\15.0\Outlook\Cached Mode
    Meanwhile, please try to install an Outlook 2013 with a fresh ISO file(Don’t use any template such as OCT template), see if the Cached mode Outlook can connect to Exchange server.
    Waiting for your updates.
    Regards,
    Winnie Liang
    TechNet Community Support

  • I am wanting to update iphone to 4.3.3, however I am connected to the internet, yet itunes is telling me it is unable to connect to update server because i am not connected to the internet... please help

    I am wanting to update iphone to 4.3.3 software. however itunes is telling me it is unable to connect to update server as i am not connect to the internet. yet i clearly am connected... Please help

    Looks like I've asked a really old/common question - toonz posted the answer - I've copied it below.  Thanks toonz, everything now ok.
    Correct AnswerRe: Updating to 1.1.3                                                                        02-Feb-2008 23:19                                                    (in response to alibeau)                                       
                            You can fix this by following the steps in this article:
    http://docs.info.apple.com/article.html?artnum=304468                                                                   
                 Liked         (1)     

  • Unable to connect to SQL Server 2008 from OBIEE 11G(on 64 bit Linux box)

    We are unable to connect to connect to SQL Server 2008 from OBIEE 11G which is on 64 bit Red Hat Enterprise Linux.
    Infrastructure: OBIEE 11.1.1.5 64bit, on 64 bit Red Hat Linux Enterprise Linux 5.6 , MS SQL Server 2008 on 64 bit Microsoft Windows Server
    Issue Description: Unable to connect to SQL Server 2008 from OBIEE11G RPD
    Details: We are unable to connect to SQL Server 2008 from OBIEE which is on a 64 bit Linux box. We created the ODBC connection on Linux box to the SQL server. Whenever we try to import metadata it throws an error that says ‘Connection Failed’.
    Here are the steps we followed to setup the ODBC connection on Linux box.
    1) We updated the user.sh file with the LD_LIBRARY_PATH and LD_LIBRARY_PATH_64 values that point to $ORACLE_HOME/bifoundation/odbc/lib
    This is where we found the driver for SQL server SEmsss23.so.
    2) We updated the odbc.ini file with the entry for SQL server with the connection details
    SI_SQL_Server_DEV = SQL Server
    [SI_SQL_Server_DEV]
    Driver=/u001_OAS/Oracle/Middleware/Oracle_BI1/bifoundation/odbc/lib/SEmsss23.so
    Description=DataDirect 5.1 SQL Server Wire Protocol
    Address=10.230.216.52,54970
    AlternateServers=
    AnsiNPW=Yes
    ConnectionRetryCount=0
    ConnectionRetryDelay=3
    Database=SVBDW_NEW
    LoadBalancing=0
    LogonID=SIDatavalidation
    Password=~~~Password123
    QuoteID=No
    ReportCodePageConversionErrors=0
    3) We updated the IDENTIFIER_QUOTE_CHAR with single quotes instead of double quotes in the DB features of the RPD
    4) We updated the bash_profile file to point the ODBCINI variable to the path where the OBIEE odbc.ini file is present.
    Export ODBCINI=/u001_OAS/Oracle/Middleware/instances/instance1/bifoundation/OracleBIApplication/coreapplication/setup/odbc.ini
    The error in nqsserver.log file says “[nQSError: 16001] ODBC error state: IM002 code: 0 message: [DataDirect][ODBC lib] Data source name not found and no default driver specified.”

    Hi,
    Make sure SQL Configuration Manager make sure the TCP/IP enabled. please try below method
    Method 1
    Re Create a new ODBC & Oracle Bi Server DSN Configuration test it and use it in the connection pools.
    define your ODBC data source in your server where the BI Server is installed. Check your DB connections in your physical layer and make they are defined on your BI Server as well.
    Method 2:
    try using the complete TNS in below format in the datasource name section:
    (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP) (HOST =DB IP)(PORT = 1521)) ) (CONNECT_DATA = (SERVICE_NAME = ORCL) ) and provide the credentials.
    Method 3:
    To use the OCI call interface you need to have oracle client DB to be installed so that you can establish a connection using that DB credentials and connect to the remote dB and then import the tables.....this is the rule of thumb.
    hope helps you.
    Thanks
    Deva

Maybe you are looking for

  • Webutil documentation

    I wish to use Webutil to develop Forms that access the client side Windows utilites. Is there any official documents with details on syntax and example of usage of Webutil?

  • Handling idoc acknowledgements inside BPM

    Hi,   I have a scenario like this File - >XI BPM -> SAP (idoc) after posting idoc into sap ALEAUD idoc will be triggered for sending acknowledgements back to XI ALEAUD SAP->XI BPM -> email              I have activated application acknowledgement in

  • How to access group content, or anything inside?

    Let's say I have this group: var myGroup = Group{      var someNumber:Number;         var stf = SwingTextField{              columns: 10,               text: "TextField",              editable: true      content:[           Text{                x: 10

  • Using ACS to deny show tech-support

    I am trying to deny the show tech-support command using Cisco Secure ACS command authorization sets (picture included). All other deny commands are working (is show running-config) but no matter what I do the show tech is un-successful. Any ideas?

  • Premire CC was working, then I updated now it crashes when i open it

    It crashes on me every time, sometimes whilst launching sometimes a few seconds after launching.  (below) I have run it in comaptability mode, updated my graphics drivers, uninstalled it and re installed it - no joy. All i know is that it was working