Outlook 2010 / Exchange 2013: The operation failed. An object could not be found.
Both KB2956128 and KB2956203 causing issue. Removing the patch fixes the issue. I need to know what the best way to remove the patch remotely is. Maybe a SCCM job with this:
msiexec /I {90140000-0012-0000-0000-0000000FF1CE}MSIPATCHREMOVE={DEFF916D-4268-49CF-8FF3-E26253582E13}
msiexec /i {90140000-001A-0409-0000-0000000FF1CE}MSIPATCHREMOVE={DEFF916D-4268-49CF-8FF3-E26253582E13}
Please advise. Also looking for time frame for a fix to be published or these updates are rolled back/pulled by Microsoft. Thank you.
Also this is being reported by multiple people with no resolution. Example:
http://community.spiceworks.com/topic/790986-outlook-2010-bug-the-attempted-operation-failed-an-object-could-not?page=1
Hi,
Thank you for your feedback and apologize for the inconvenience caused.
We have heard several reports regarding issues caused by KB2956128. We've escalated this issue, but we're not sure whether and when there will be an hotfix for this issue. Please look out for our official blog articles and install
all available updates released.
Thanks for your understanding and support.
Steve Fan
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs.
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected]
Similar Messages
-
Outlook 2010: Getting a "the operation failed" error when accepting invite from inbox
One of the people I support is using Win 7 and Office 2010. When accepting an invite in his inbox, he gets "This Operation Failed", however this behaviour only occurs for internal staff who email him through Exchange. I emailed him from an external email
address and he was able to accept the invite and have it appear in his calendar correctly.
We are running Exchange 2007 and his client is Office 2010.
I'm going to try the following to try to get to the bottom of things
1. Check account settings
2. Disable antivirus
3. Try non cached mode
4. Check Delegate access?
5. Check event logs
6. Office updates / service packs
7. Repair job of Office 2010
8. Reinstall Office 2010 or install 2007
Does anyone have any other suggestions?Glad your issue has been resolved.
Thanks for your sharing.
Evan Liu
TechNet Subscriber Supportin forum
If you have any feedback on our support, please [email protected]
Evan Liu
TechNet Community Support -
The attempted operation failed. An object could not be found. Outlook 2010 error
I am unable to search other mailbox in Outlook 2010, getting the following error: The attempted operation failed. An object could not be found. I removed both instances of
KB2956128
installed
on 2/11/2015. It worked for a while and issue returned againa. Any suggestions?Hi,
Thank you for your reporting. We have noticed this, and would like to collect more information for further investigation.
Can you guys share your detailed system info? Also, if you have any log files about the issue, kindly share with us by sending them to this email account:
[email protected] (please use the link of this thread as the subject).
We appreciate your assistance with this.
Regards,
Melon Chen
TechNet Community Support
It's recommended to download and install
Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
programs. Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
[email protected] -
0x8004010F: The operation failed. An object could not be found.
1. reviewed Profile instructions
2. Ran SytTools thinking it would fix the error. NO although I could send received I ended up with a giant pst
3. Back to Profile Instructions.
4. Set up new profile with my email address. email address tested well. Run Outlook. loads as outlook data PST
and gmail address PST. Deleted all the Gmail subscriptions to improve speed. Original error was gone but have two GIGANIC PST FILES.
5. Set up another new profile with my email address and a named pst. Run Outlook under that Profile -
comes up with newly named pst and the gmail addrress pst (although I can't figure out where that pst is located. Will not let me use email address as default Profile. Tried different approaches and still ended up always with the gmail address pst. Deleted
all profiles but email address and comes up.
6. Should I just go ahead and use the gmail address pst I need to import data or download data from gmail
to get last years correspondence.e
7. Outlook is my lifeblood, I am in communications and every submitted email gets moved to a file with an update.
Help?
8. One option is to merge psts but might make worse mess.
Thanks. Beautiful Beach weather here!To resolve error 0x8004010F , identify the current location of your default Outlook data file, and then create a new Outlook profile.
Step 1- Locate the default Outlook data file
Click Start, and then click Control Panel.
In Control Panel, click Mail.
In the Mail Setup - Outlook dialog box, click Show Profiles.
Select your current Outlook profile, and then click Properties.
In the Mail Setup - Outlook dialog box, click Data Files.
Select the Data Files tab in the Account Settings dialog box, and then note the name and location of the default data file for your profile (a check mark will denote the default data file).
Click Close.
Step 2 - Create a new Outlook profile
Step 3 - Configure your new Outlook profile as the default profile
More detailed steps you can refer to this KB article:
http://support.microsoft.com/kb/2659085 -
Operation System: Windows 8 Pro
System Type: 64-bit Operating System
Office: MS Office Professional Plus 2013
I am getting "The attempted operation failed. An object could not be found" error when I double click on an .ics file to an appointment to my calender. My outlook.com account's data file is set as default and this error only occurs if
that is the default data file. I thought that maybe my profile is corrupted. So, I opened up a new profile with the below steps and only add my outlook.com account there:
1-) Open up the Control Panel and go to Mail section
2-) Click "Show Profiles"
3-) Click "Add" and give a name to your profile.
4-) Configure your outlook.com account (with Auto Account setup, not manual steps)
5-) Finally, set that profile to be used always.
Then, I opened up the Outlook 2013 and clicked on the .ics file to add that appointment but got the same error.
Is this a known issue or specific to me?
Thanks!yes, I have the same problem.
The workaround of saving the ICS file and then importing it into the current calendar
works,
but the ICS calendar
displays in other section, NOT in the section of my old events.
why ?? -
Hello,
"C:\app\xps\product\11.2.0\dbhome_1" where is my installation of database oracle enterprise 11g; I use Windows 7 Pro.
I have in System PATH : C:\app\xps\product\11.2.0\dbhome_1\bin
I have in HKEY_LOCAL_MACHINE > SOFTWARE > ORACLE > SYSMAN > OracleDBConsoleorcl : "ORACLE_HOME" value "C:\app\xps\product\11.2.0\dbhome_1"
When i execute "sqlplus / as sysdba" command, i receive error: "The procedure entry point longjmp could not be found in the dynamic link lib. orauts.dll" and "Error ORA-12560"
If i execute
set ORACLE_HOME=C:\app\xps\product\11.2.0\dbhome_1
C:\>set PATH=%ORACLE_HOME%\bin;%PATH%
sqlplus "/ as sysdba"
I don't receive Error.
Why?You don't mention which specific version of the operating system that you are using - Windows XP, Vista, or 7 and whether you're using a 32-bit or 64-bit version.
FWIW, kernell32.dll is a Windows system-level module, so it's possible that you have some corruption in your Windows installation which is preventing FM from launching.
Also, 2Gb of RAM is a bit lean for FM. -
I am not able to go to the facebook site. www.facebook.com is not working. I get the following error message. 404 Error - Not Found
The resource you have requested could not be found on the server. There are many possible reasons for this. Either the file does not exist, there is an error in your request, or the file is not accessible in the requested directory. Please verify that:
* You have used the proper case; requests ARE case-sensitive!
* You have entered the URL correctly. (i.e. proper directory/filename)
* You used the FULL URL. (i.e. proper file type: .html, .gif , .jpg, etc.)
* You use a tilde (~) before user directories. (i.e. www.furcen.org/~jurann/ )
* The user/file still exists on this server.
I also get redirected to "Busca Google" when typing www.facebook.com in the address bar.
== URL of affected sites ==
http://facebook.com; buscagoogle.comI have the same problem and it does not have to do with firefox. Do you have any idea how to fix it through?
-
The Image viewer flash element could not be found
The image viewer flash element could not be found. What
should I do? Any plug in exists or is it mistake in program? Help
me, please. Thx JoeHi,
The issue here is the mapping of the interface to the service in question, and usually points to a possible mistype or rename of something within your service architecture.
You need to make sure your namespace and service name here match your service name itself.
For detailed information, you could refer to:
https://haddicus.wordpress.com/2011/06/06/service-attribute-value-not-found-wcf-services/
http://stackoverflow.com/questions/9557221/the-type-restservice-weddingservice-provided-as-the-service-attribute-value-i
Regards -
Does anyone have a cure for the following error running on Windows, "The procedure entry point sqlite3_wal_checkpoint could not be found located in the dynamic link library SQLite.dll.
I have searched my computer for that file SQlite3.dll and also file QTCF.dll and I cannot find either one when I search my whole computer for it. I cannot fix this! I deleted Itunes and every time I try to download it, it goes through all this download till the end when it says that iTunes.exe-entry point now found and that Procedure entry point message comes up. HELP! This is driving me crazy. How can I get itunes to work again when I can't find the danged .dll file to remove, move or rename!?!?!??
-
Trying to install a new time capsule. I get access to the time capsule via Finder and I am able to surf the web. When trying to chose backup disk, it allows me to chose the Time Capsule from the list and type my password. I then get the following error message:Time Machine could not be configured. The built-in network interface could not be found.
What now?iblastoff wrote:
glad im not the only one with this issue...
i've been able to do one single time machine back up. tried to backup today and i am getting the "time machine could not be configured. the built-in network interface blah blah blah" crap.
Besides this "me, too" complaint with no information, what have you done about it?
Have you tried this: http://support.apple.com/kb/HT3275#5
What is your backup destination?
What sort of Mac do you have (please update your profile)? -
How can I bulk delete songs from the playlist, if original file could not be found.
I deleted the original files from the Library iTines. The songs are still in the playlist. How can I bulk delete songs from the playlist, if original file could not be found. Thank.
Take a look at my FindTracks script. Download it and test it out on a few tracks first. Use the No option first time around to manually confirm each path that it wants to fix so you can see how it works. When you're happy it does what you want select a larger group of tracks to process automatically.
tt2 -
PRCD-1120 : The resource for database dwhpd1 could not be found.
OEL 5.1
11.1.0.6 Oracle database RAC
11gR2 Grid
Hi,
I have installed 11gR2 grid with ASM and restored/recoverd a 11gR1 database. The 1st node is up using asm but when I check with svrctl I get errors :
[oracle@avgrac01 admin]$ /u01/app/11.2.0/grid/bin/srvctl status database -d dwhpd1
PRCD-1120 : The resource for database dwhpd1 could not be found.
PRCR-1001 : Resource ora.dwhpd1.db does not exist
I have read that it's something to do with SCAN and the remote listeners.
Please can someone point me in a direction/document/help, please798188 wrote:
OEL 5.1
11.1.0.6 Oracle database RAC
11gR2 Grid
Hi,
I have installed 11gR2 grid with ASM and restored/recoverd a 11gR1 database. The 1st node is up using asm but when I check with svrctl I get errors :
[oracle@avgrac01 admin]$ /u01/app/11.2.0/grid/bin/srvctl status database -d dwhpd1
PRCD-1120 : The resource for database dwhpd1 could not be found.
PRCR-1001 : Resource ora.dwhpd1.db does not exist
I have read that it's something to do with SCAN and the remote listeners.
Please can someone point me in a direction/document/help, pleaseHi,
This error means database is not registered in OCR
If the database was not registered in the OCR, after restoring the database you must manually add the database in the OCR (add database and instances)
http://download.oracle.com/docs/cd/E11882_01/rac.112/e16795/srvctladmin.htm#RACAD5011
http://download.oracle.com/docs/cd/E11882_01/rac.112/e16795/srvctladmin.htm#i1008526
About integrate 11.1 with SCAN 11.2 you must use note below:
How to integrate a 10g/11gR1 RAC database with 11gR2 clusterware (SCAN) [ID 1058646.1]
Hope this helps,
Levi Pereira -
"The page you have requested could not be found. (404)"
Used iWeb to create a website. Personal domain. Was working fine. Made a minor change to the copy on the site and republished. Now I get the message "The page you have requested could not be found. (404)" on every page of the website.
What's going on?Made a minor change to the copy on the site and republished.
You probably changed something in the url which breaks your link. For help you need to provide your personal url so someone can see what the exact problem is.
I assume your site is this?
http://web.me.com/rdhaynes -
The specified user domainname\user1 could not be found;
hi,
am writing script for adding the users into site collec admin group.till last week this code was working fine. but from yesday onwards, am getting this error. this user already exists in the farm and AD. etc...
thanks to Simon Doy,. i took refer.from his code:
http://blog.ithinksharepoint.com/2014/05/30/powershell-script-add-user-as-site-collection-admin-to-all-sites-in-web-application/
Add-PSSnapIn Microsoft.SharePoint.PowerShell -ErrorAction SilentlyContinue
$MasterUsernames = "in\userB#in\userC#in\userA;
$UsersNamesArray= $MasterUsernames.Split('#')
$siteCollection = Get-SPSite "http://srvr1:123/sites/engg/"
Write-Host "Setting up user $MasterUsernames as site collection admin for $siteCollection.Title " -ForegroundColor White;
foreach($singleUserName in $UsersNamesArray)
#$userToBeMadeSiteCollectionAdmin = $siteCollection.RootWeb.EnsureUser($Username);
$userToBeMadeSiteCollectionAdmin = $siteCollection.RootWeb.EnsureUser($singleUserName);
if($userToBeMadeSiteCollectionAdmin.IsSiteAdmin -ne $true)
Write-Host "$singleUserName is not site admin"
#pause
$userToBeMadeSiteCollectionAdmin.IsSiteAdmin = $true;
$userToBeMadeSiteCollectionAdmin.Update();
Write-Host "User is now site collection admin for $siteCollection" -ForegroundColor Green;
else
Write-Host "User is already site collection admin for $siteCollection" -ForegroundColor DarkYellow;
Write-Host "Current Site Collection Admins for site: " $siteCollection.Url " " $siteCollection.RootWeb.SiteAdministrators;
can anyone pls point me why am getting this error suddenly.this is working code and am getting this error only for a particular user.
am getting this error.
Exception calling "EnsureUser" with "1" argument(s): "The specified user domainname\userA;
could not be found."
At C:\powerscripts\AddUsers_SiteCollecAdmin.ps1:20 char:10
+ $userToBeMadeSiteCollectionAdmin = $siteCollection.RootWeb.EnsureUser($ ...
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo : NotSpecified: (:) [], MethodInvocationException
+ FullyQualifiedErrorId : SPExceptionHi Sadomovalex,
am using Windows Claims only, not FBA.the issue started only 2 days back. it was working fine till last week.
note: i was creating site collections with dedicated content db through powershell and adding metadata , contents types, doc libs, association etc etc kind of jobs. After end user found some bugs in my site collec .we thought of dropping the site collec
and db and recreate it again. this was repepated multiple times. 2 days back i was performing this - recreatng the same sitecollec and content db - [ after deletion ] it recreated. and end user came to me for adding few members as sitecollec
admin.s since this is a routine task, i wrote this powershell. -
The dependency 'BusinessObjects.Enterprise.Sdk' could not be found.
Hi,
Can anyone help me solve this problem, its my first time using crystal reports
i have installed VS 2003 and Crystal report XI professional Edition, i am trying to run the system but it is complaining about the BusinessObjects.Enterprise.Sdk not found, I read from another post where they say crystal report XI comes with BOE sdk so i dont have to install it separately, so i was advised by someone to reinstall Crystal report but it didnt solve my problem.
i also have another error "The dependency 'CrystalDecisions.Enterprise.PluginManager' could not be found." which im assuming its caused by the sdk error.
Does anyone have an idea how to solve this problem?Hello,
The Professional editions of Crystal Reports XI (v11.0) and Crystal Reports XIR2 (v11.5) are not development level products. This means your VS IDE didn't get updated to stand alone versions of the various Crystal assemblies. I would expect that the Crystal references in your VS2003 application are v9.1.5000 because CR XI/XR2 Professional doesn't update your IDE.
If you're trying to develop an application that interacts with a BusinessObjects Enterprise (BOE) system then you need to install the BOE .NET SDK onto your development machine. The BOE .NET SDK (for CR XI (v11.0) and CR XIR2 (v11.5)) has to be installed from the Enterprise installer media. It can not be downloaded.
You can install the BOE .NET SDK using the u201CServer Installu201D path after launching the BOE installer. Just choose Server Install u2013 you will need your BOE keycode. Next choose Custom install. You'll be presented with a drop down list for the Enterprise components. Deselect everything and then look for the Developer Components option. You may have to drill down into one of the levels to find it. Under Developer Components you'll see the BusinessObjects Enterprise .NET SDK. Select it to install to the development machine. This should allow you to work with the Enterprise .NET SDK.
When you are ready to deploy your .NET application you will also need to install the .NET SDK onto the Web application server (assuming it's not also your Enterprise server). This is because we are not fully managed by the .NET Framework.
Sincerely,
Dan Kelleher
Maybe you are looking for
-
How to pick the fields of ABC table in Payslip
How to pick the fields of ABC table in Payslip, So i want to add the calender days(absent days) in my payslip
-
Iweb background stretches when objects are moved around the page
Hello, I am creating a simple site in iWeb and I cannot get my background image to be consistent through all of my pages. What I mean is the position of the image varies slightly through the pages. In my home page (and all of my other pages)the backg
-
App Store problem after update
Hey guys.. I am using the Iphone 5.. Since my last OS update whenever I click an app in the app store it shows too many http requests.. Does anyone here faces the same problem?? Please help me out..
-
I'm not allowed to use my credit card buy stuff in the game
I can't use my credit card to buy coins in Haypi monster game.Please solve this problem.
-
An unexpected error occur processing your request." when launching Muse
An unexpected error occur processing your request." when launching Muse.I am experincing the same problem i found the folder but when i try to delete the file it says action can not be completed file is open in adobe CC iam not even signed in