Output could not be issued Message no. V1104

Hi Expert,
I have done output configuration properly for Zsalesorder and Zsmartform ,I can able to see print view in order but when I will give print then print is not coming and below error is coming
Output could not be issued Message no. V1104

Hi,
it seems there is no connection between printer and sap server.
Firstly send normal world doc from  server to printer.
If normal world document is not printed in this case you should check  connection.
Regards

Similar Messages

  • SmartForm - Output could not be issued,Message no. VL086

    Hi , i had create a smart form for the DO and it is working when i try to view it through the function. However, when i want to try it through issue the Delivery Output, system  throw error , "Output could not be issued,Message no. VL086"
    Please kindly advise.
    thank you

    Hi,
    Pls check if it helps
    VL086: Output cannot be issued
    Siraj

  • Output could not be issued message whlie handling smartforms.

    while executing the smartform i am getting Output could not be issued message and i am getting no display.
    My functinal consultant had created new output type for VF03 tcode ( a copy of existing one), and i copied the same program and smartforms with slight modifications.
    now while executing the output type through VF03 I am getting the abouve message.
    and while checking there is no data in JOB_OUTPUT_INFO internal table of the smartform.
    what will be the reason? and how to correct this.
    <b>this is an urgent task.</b>

    Hi,
    This might be mostly becoz of due to data not getting passed to the Smartform.
    First ensure that, you get the data in the internal table of the Driver program and then check the same in the SM...
    So please check and let me know if the problem persists.
    Thanks,
    Vishnu.

  • Output Could not be Issued - V1104

    Hi Experts,
    I have configured the output types and output determination procedures for sales doc type OR.
    When I create a sales order and go to VA02 , and check the header-> output , I am getting this error:
    'Output could not be Issued, Message no.V1104'
    I am not sure where I did wrong, can anyone suggest a solution for this?
    I checked the previous threads but did not find anything regarding this error message.
    Thanks,
    Arthy

    Hai Arthy,
    Follow th e steps:
    T CODE:  NACE
    Select V1
    Click Access sequence Number
    002 - Sales order type
    Select the access sequence for which condition records maintained.
    from the left list click the
    Accesses
    10     7     Order Type
    Select the Overview access
    Now click the Fields, it will show
    AUART          KOMKBV1     AUART     Sales Document Type             
    Now save it again and check in sales order.
    Regards,
    Mani

  • Error : Output could not be issued

    Dear Expert,
    I am not able to take print out of one of my invoice. While looking for print preview i am getting error message as below :
    Output could not be issued
    Message no. VF 304
    Diagnosis
    An error occurred while output was being issued. It is possible, for example, that the form to be issued has not been activated or has an error. An error may also have arisen while the data to be issued was being edited.
    I did some changes in smartform but all is activated and other invoices are showing proper output except one.
    can you please tell me possible causes to trace this error.
    Thanks.

    Hello,
    Please check the OSS : Note 451568 - Document printing:Message VF304 - Output could not be issued for more informtaion.
    https://websmp130.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/sapnotes/index2.htm?numm=451568
    The OSS will be helpful.
    BR,
    Tushar

  • Delivery note smartform - Output could not be issued

    Hi All,
    output could not be issued for delivery note smartform.
    Here is what I get when I try to print:
    Output could not be issued
    Message no. VL 086
    There is only one Partner (ship to party) and it has record in NAST for the output type I use.
    Delivery type is ZLCC (no sold to party)
    If I try to make print preview - nothing happens at all, even no message...
    It works fine in dev system, but not in quality system.
    Any ideas?
    Regards,
    Mindaugas

    Hi,
    Check If the output type is assigned to the document in quality"
    Use transaction NACE
    Choose application V2 Shipping and press Output type button.
    Check first in your development system, and then in the quality system
    Regards
    Åsa Thenstedt

  • VT03N Output could not be issued (VW086)

    When trying to print in VT03N or VT02N trx When you choose 'Shipment --> Issue output to --> Screen or Print always appears ""Output could not be issued" Message.
    I've already checked NACE (appl V7) . Also, we don't use DGTMD table. In fact other messages is working and no message use that table.
    I've tried to put a bp with a message and just gives error in the call function " RV_MESSAGE_PREVIEW"
    Any Suggestions?
    Regards
    EC

    Thanks a lot every one!
    I have "half solved" my problem changing my Output Type, from Shipping Point to Carrier.
    This is a brief description when I use Shipping Point Partner:
    In "Mantain Output Files" into my "Partner functions" for my Outupt Type I have:
    Medium = 01 Print output
    Funct =  01 Shipping Point
    My problem happens when, in VT02N, when I try to print the next FORM is called: CHECK_PRINT_RELEVANCE (Report RVADTR01).
    T
    his FORM chek this:
    IF ( LEG-TDLNR = NAST-PARNR ).
          FLAG = TRUE.
    If my partner is Shipping Pont, then LEG-TDLNR = CARRIER NUMBER but NAST-PARNR = Shipping Point, therefore FLAG = FALSE and then I have my Error Mesage.
    When I changed my partner from Shipping to Carrier then I got print.
    Anyone knows how can I use partener = Shipping point and pull this event?
    Regards
    EC

  • Getting sucess message as output could not be issued after the printout

    hi,
    in the Transacation VF02 i want to print my Z smartform.
    so in the NACE transaction i have copied the RD00 and created Z entry and the Zsmartform.but the After printing the smartform i am getting the success message in the bottom of the screen as output could not be issued.but i should get the message as output is issued succesfully since i got the print.
    pls suggest me

    Hi shantha,
    i suppose it will solve if u will debug that object.
    Reply for queries. shal post the updates....
    Regards,
    Kumar.

  • Error in VF03 while printing "Output could not be issued"?

    Hi all,
    getting error while printing invoice VF03. Error is "Output could not be issued".
    Print privew is coming fine in both side either Smartform or VF03. If I try to print, then system giving the message is Output could not be issued.
    How to resolve this problem? Help me out.
    Thanks in advance.
    Sekhar

    Hi,
    Check out put is definded in line item of invoice.
    Also check wheter output type is definded or in t.code nact, Application is V3,  check which output type is definded for your case billing document type.
    Thanks.

  • Urgent: Error in script output "output could not be issued"

    Hi Experts,
    I am using transaction VL02N and issuing output then it is giving error "output could not be issued" in development server.when I productionize it in production it is giving the proper output when no of line item is upto two if it exceeds it again give error message "output could not be issued"
    Plz give help.
    Thanks,
    Tanisha

    Hi,
    s i agree that there are some data available in devpt server as well...
    I'm listing u all the possibilities of error ... please make sure that ur doc satisfies these things
    1.check whther the entries are there for the corresponding billing doc no...
    2.Now suppose if you want to some data to be displayed in one
    page and the rest of the data in another page i.e you want to force the data
    to move to next page then use this sap script command
    /: NEW-PAGE[page_name]
    This will force the data to move to the next page.
    3.assuming that u r using two pages(FIRST,NEXT) in the layout...
    the statement that displays the line item should probably be inside the loop and corrosponding form and end form.. so that if it exceeds the page it'll automatically display it in the next page..
    4.Try to expand the main window size so that continous line item
    5.Make sure that u have alloted the corresponding output type for the billing document issued...
    6.check the form name and the driver program name)in NACE transaction
    Hope this helps you
    <b><REMOVED BY MODERATOR></b>
    Jgds
    Message was edited by:
            Alvaro Tejada Galindo

  • In smartforms error : output could not be issued

    Hi Experts,
    I am executing a smart form in particular transaction but I am getting output could not be issued error message. I have checked in nace and output type is assigned and condition record is also maintained for that condition type. That condition we checked in quotation document extras>output> edit and the coditon was there but we are not getting the preview.
    Thanks.

    If you have done any modifications in the layout.
    Then it will not print.
    If the alignments are not fitting properly then also it will not print .
    Regards,
    Vinay.

  • VF03 smartform: Output could not be issued

    Hi All,
    Ive created a custom invoice print program and associated smartform.
    These two run perfectly together when standing alone.
    However Ive created a custom  output type to call this program from VF03.
    This output type appears in the "Issue Output To "options in VF03.
    But it returns the message "Output could not be issued" when trying to print.
    In debug mode the Print Program and smartform execute perfectly when calling from VF03 in the same way, but the output fails to appear.
    In the Header -Output section inside the status of the output type is "Not Processed".
    Any ideas guys??

    Hi
    It seems that the Output determination is not taking place correctly
    the link between the Output type and Program and smartform is not established peoperly
    You have to assign this in SPRO  for the billing documents
    And most of the times it won't work we assign our custom program to the custom output type
    it is better to use the std output type and the Std program(you copy the std and can change it but the same copied ZPeogram to be attached) and Copied/modified smartform.
    check this.
    Output is a link between the Driver Program and the Sapscript,
    An output type summarizes messages of the same meaning. It contains parameters that are valid for all its assigned messages, for example appropriate partner functions.
    Transmission medium is a medium which the layout will be come out, this may be printout, Fax or Mail
    Check this link.
    http://help.sap.com/saphelp_nw2004s/helpdata/en/c8/19884743b111d1896f0000e8322d00/content.htm
    ex-how to config output type.
    You will assign output types using Transaction NACE.
    Do the follow steps to assign output type
    1)Select Application Type V2 which will have description Shipping.
    2)Click on Output types button.
    3)Go to change mode by pressing Ctrl+F4.
    4)Select one output type which already exists
    5)Do Copy As(F6)
    6)Give your output type against Output Type field.
    7)Under General data Tab, Give Program and Form routine and Save the data.
    i think it a work of functional guy but at senior level i think it is not a big deal for abaper.
    Check the following documentation
    In NACE t-codewe have the application for each one. based on the application output type can be defined, based on output type script and print progrma can be defined.
    If suppose data can be read from EDI then we should go for condition records.
    So whenever we execute the script first composer checks the output type and then execute the program. in program whenever opn form FM will be populate then script will open first. After that again program till another FM will populate if it then script will populate........like it is cycle proces. Composer does all these things and at last it will submit that output to spool.
    Go to the Transaction NACE.
    choose the related sub module.. like billing or shipping
    doubel click on Output Types
    Choose the Output Type for which whcih you wanted your script to trigger
    Then select the Output Type and double click on Processing Routine
    Then go to create new entries--> Select the Medium (1- print output), then enter your Script and Print Program detls --> Save and come out
    Now go to the Transaction (for which you have created the output type)... Issue output--> Select the output type --> Print....
    Device Types for SAP Output Devices (Detail Information)
    Definition
    The device type indicates the type of printer to be addressed. When you define an output device, choose the name of the device type that was defined in the SAP System for your printer model, such as Post2 for a PostScript printer. In the case of frontend printing under Microsoft Windows, you can also use the generic (device-independent) device type SWIN.
    The system uses the information in the device type to convert a document from the internal SAP character representation (spool request in OTF or in text format) to a device-specific, print-ready data stream (output request). Since a device type specifies attributes that apply to all devices of a certain model, it can be shared among device definitions. For example, all devices in the SAP spool system that are compatible with Hewlett-Packard LaserJet IIID printers would use the HPLJIIID device type.
    You should not confuse the device type with the printer driver. The device type is the total of all attributes of an output device that the SAP System must know to control the output device correctly, such as control commands for font selection, page size, character set selection, and so on. These attributes also include the printer driver that SAPscript/Smart Forms (the SAP form processor) should use for this printer. The SAPscript printer driver that is to be used for devices of this type for output formatting is therefore only an attribute that the device type specifies.
    How do I choose the correct device type?
    • In most cases, the SAP System already provides the appropriate device type for the printer type for the printer model that you want to use.
    These standard device types are completely defined and need no modification or extension before you use them in device definitions.
    • You can also download missing device types from the sapserv server. For a current list of the supported device types, see SAP Note 8928 in the SAP Service Marketplace.
    • Most printers can be controlled using a generic format, such as PostScript. They can be switched to a mode that is compatible with one of the standard printers for which an SAP device type is available. In this case, a supported model is emulated.
    • Almost all printers are delivered with Microsoft Windows printer drivers. The system can control these printers with the generic (device-independent) device type SWIN. The Microsoft Windows spool system then performs the processing of the print data.
    • If the specified device types are not available, and generic device types cannot be used, you must create your own device type or edit a copy of an existing device type. We recommend that only those with specialist knowledge of the SAP Spool System and printer driver code do this. For more information, see Defining a New Device Type .
    Attributes of a Device Type
    A device type is distinguished by the attributes listed below. If you change an existing device type or create a new device type, you must change at least some of these attributes.
    • Character set: A character set specifies the codes with which characters must be represented in the print-ready output stream (output request). This code replaces the generic SAP characters set that is used internally by the SAP spool system (spool request).
    • Printer driver: You can specify different printer drivers for printing SAPscript documents and ABAP lists.
    • Print controls: Print controls represent printer operations, such as boldface or changing the font size. These print control are replaced by printer-specific commands during the creation of the output request from a spool request.
    • Formats: Formats specify the format supported by the SAP system. The system differentiates between SAPScript formats (DINA4 and LETTER) and ABAP list formats (X_65_132 = 65 rows/132 columns).
    • Page format: A page format is the interface between a format and SAPscript. It specifies the paper dimensions with which SAPScript can calculate the row and column lengths.
    • Actions: Actions are output device-specific commands that are required for the implementation of a format. The action printer initialization, for example, can contain a printer command with which the number of rows on a page is defined. There is a set of actions for every format supported by a device type.
    Output Determiantion :
    You can use output control to automate either messages or subsequent processing of partner-specific messages"
    This means, it provides a method for you to perform subsequent processing once a document is saved in the system. This subsequent processing is normally to print the document, but can also include activities such as:
    - Faxing the document
    - Emailing the document
    - Sending an idoc of the document
    - Sending an EDI message for the document (via an Idoc)
    - and so on.
    In general, it uses the condition technique to determine what, if any, output is to be produced. The condition technique works by selecting key fields from the document (document type, plant, etc.) and matching them to master data records you have previously set up. If there is a match, then output is produced.
    You can use transaction NACE for the output determination settings for all applications.
    1. When you start transaction NACE, a list of all represented applications appears.
    2. From this initial screen, you can access all the individual processing screens for output determination from the EDIT menu.
    3. Select the relevant application. This transaction does not have a menu path in customizing.
    Refer the following links.
    http://help.sap.com/saphelp_crm40/helpdata/en/b3/58bf39f7568648e10000000a11402f/content.htm
    http://help.sap.com/saphelp_erp2004/helpdata/en/c8/19878343b111d1896f0000e8322d00/frameset.htm
    http://help.sap.com/saphelp_erp2004/helpdata/en/c0/4e4746497d11d385ee0000e81ddea0/content.htm
    <b>Reward points for useful Answers</b>
    Regards
    Anji

  • Output 'incorrectly processed', 'output could not be issued'

    Hi,
    We trying to trigger a Bill of Lading custom Z print output type. This output was working correctly for some time and now it has started failing. When we try to issue the output through screen option it gives message 'output could not be issued'. But we are not able to figure it out as why this message is appearing even though all output configuration is good. The same output is triggering if we make some changes in the shipment change transaction(although changes are not relevent for the output parameters) but this behaviour is not constant as output triggers some time after the changes and some time may not.
    When we try to retrigger the output type using messages option on the shipment, error appears as 'incorrectly processed'.
    Please suggest as why this output type is behaving like this. Any help will be highly appreciated.
    Thanks,
    Sharan

    if it worked well in the past, then I would check if there was a change in the print program or in the form or in customizing, further I would investigate if this could be triggered from "outside" e.g. implementing OSS notes, activate business functions etc.
    If you know the date when it started failing, then checking the transports of changes prior to this event in SE10 could be a good starting point.

  • Output could not be issued

    Hi,
    We are in process of upgrade.now we are in testing face.When we testing vy printing sales order doucments from VF03 trasaction we are getting error message 'Output Could not be issue',but when we are trying to see print preview it appears correct.When we test with same printer in 4.6c we doesnt have any problem.Please help us in solving this.
    Regards,
    Sunil.K

    Hi Sunil,
    Goto Service.sap.com and chk for this note.
    OSS Note 451568 - Document printing:Message VF304 - Output could not be issued
    and try to apply the corrections present in the note.
    Regards,
    Lakshman.

  • "Output could not be issued" when using custom page formats

    Dear all,
    I created a custom page format using SPAD. Its dimension is 7.5cm x 10cm (190mm x 254mm). I also created this page format in windows and set as the default paper size in my printer. However, when trying to print a smartform using this size, the message "Output could not be issued" is given. When I use the standard paper sizes (e.g., LETTER, DINA4), the form prints OK.
    Can you point me to the direction to solving this?
    Thank you!
    Kyle

    Issue resoved.
    For those who are encountering the same problem, here's what I did. I tested the smartform by itself and it reported the specific error: the page format is not supported in device type SWIN. I added it in another device type SAPWIN. This was just a simple miscommunication between the admins and the developer. I added the format in SWIN and everything works fine.
    Kyle

Maybe you are looking for