Output determination for P45 form...

I had a quick look at OSS 1230107 in regards to the new P45 A4 form. All seems to have been installed and is working, although all three pages print to the same printer tray at the moment.
I have made a copy of sapscript HR_GB_P45_A4_D (ZHR_GB_P45_A4_D) and have added the appropriate tray information for each of the three pages. However, I am familiar with output determination for SD/MM but have no idea where I can substitute SAP's form for my Z form?.
Jas

Subject: Re: Output determination for P45 form...
Message: We know have everything printing, however, neither of the new SAP supplied P45 forms align correctly, they are both around 5 or 6 mm out, especially when printing on the HMRC pre-printed stationary. The form which prints the boxes etc. onto plain paper (HR_GB_P45_A4) seems to miss the heading off, "P45 Part 1A",  for example, it's almost as though it has printed off the top of paper with the last 1mm of the heading showing. The form for pre-printed stationary is exaxtly the same with all fields about 5 or 6 mm out, vertically.
We have a Lexmark 630 and our basis team have checked that we have the right driver for it. We also have am HP laserjet as well, but that behaves exactly the same.
Has anyone encountered this problem before?.
At first I thought it may be because the printer itself is configured for Letter rather than A4, but I've checked the front panel menu of the printer and it's set to use A4.
I know that I can correct this problem bu changing every field for all three pages, but should I have to modifiy this. Does anyone know if SAP have released a fix for this?.
Jas
Hi Jas,
Yes we have faced this problem before, now I am not sure what has been done in the system to resolve it, but my Basis Consultant configured a separate Local printer in the system called ZP45 or something. It will work exactly like a local printer and print to the default printer assigned to the PC, but the alignment becomes spot on. Instead of choosing LOCAL, the user selects ZP45 when running the P45 program. We did not need to do anything to the sapscript form itself.
Hope this helps.
Edited by: Harish Krishnan on May 19, 2009 9:48 AM

Similar Messages

  • Output determination for ordering address

    Hi
    In our business, more than one ordering address might be available for the same vendor. Therefore, we need to send Purchase Orders to different Ordering Address for the same vendor.Kindly help how to maintian the output determination for this.
    -Prabu

    Hi Prabhu
    Output determination
    What is output?
    Output is communication. When we create a transaction in sales & distribution, and save the transaction we may have to communicate to the concerned business partner about the transaction.
    Example;
    Customer--Purchase Order-VA01 (Create sales Order)- save the sales order- send the order confirmation to the customer
    Here the output is “ Order confirmation”
    This output is sent to business partner-Customer-Sold to Party
    Other Examples: Quotation, Invoice, Delivery note, Packing List
    Output determination happens through Condition Technique.
    Condition records are very important here. And these records contain answers to following questions.
    a)     What is the Output Type? Order confirmation or Invoice etc
    b)     Who is the recipient? A Sold-to-party or Payer etc.
    c)     What is the media? Take print out and send, or as email? Or Fax? Or EDI (Electronic data Interchange)
    d)     When output to be processed? Immediately when the transaction saved or scheduled to happen at particular Time etc
    e)     In which language the output to be prepared
    Customization:
    IMG—SD—Basic functions—Output Control
    Output Determination
    Output Determination using Condition technique
    Maintain Output Determination for Sales Documents
    Maintain output types
    SAP provides standard Output types for sales, shipping, transportation and billing
    Sales:
    AF00                    Inquiry
    AN00                    Quotation
    BA00                    Order
    RD03                    Cash sales invoice
    Each of this condition type has Repository data called Routines
    a)     Program---Program that reads data from tables (VBAK / many tables storing data pertaining header etc)
    b)     Form routine—Program used for creating layout
    c)     Form---Layout
    The Output type has an Access sequence
    Example: BA00 has access sequence 0010
    Access sequence uses sales document type as the field under table 7
    SAP provides standard Procedures, Copy the procedure and assign it to the Sales document Type
    Select maintain output determination procedure
    Position               V10000 (Order Confirmation)
    Select V10000 and Copy as
    ZV1000 Kirlosakr Order Confirmation
    Save
    Assign output determination Procedure
    Allocate Sales Document Header
    Position ZKOR
    Sales document Type               Procedure
    ZKOR                              ZV1000
    Save
    Now maintain Condition Records
    SAP menu—Logistics—Sales & Distribution—Master data-Output--sales document
    Create VV11
    Sales Doc=ZKOR
    Partner function=SP
    Media=1 Printout
    Date=4 immediately when saving transaction
    Lang=EN
    Now select Communication Tab
    Printer= A000 virtual Printer
    Save the Record
    Create an order and check the Order Confirmation
    Create VA01
    Save
    VA02- sales document—issue output to
    Select BA00 and select Print review to see the Output
    Outputs for shipping processes customization carried out under Logistics Execution
    IMG Menu—Logistics execution—Shipping—Basic shipping Functions-Output Control-Output determination---
    Maintain output determination for outbound deliveries
    Std Delivery outputs
    LD00                    Delivery document
    PL00                    Packing List
    Follow the same procedure, like in sales, Copy the std Procedure and assign to respective documents like Delivery document etc
    Output determination for Groups---Used for picking list generation
    Output determination for handling units—for packing
    Reward if useful to u

  • Output determination for sales order via email notification

    Dear All,
    Can some one provide  me  a  step by step configuration guide for Output determination via email notification.
    I would appreciate for your prompt response.
    Thanks
    ANGKS

    Hi there,
    For getting output Email or any media you have to do output determination. output determination is also carried by Condition techniques.
    Configuration path: (following are the steps)
    1) SPRO-> IMG-> Basic Functions-> Output Control-> Output Determination-> Output Determination using Condition Technique- >Output Determination for Sales Documents .
    2) Create Condition Table: select the field Sales Doc Type from field catalog & Save
    3) Maintain Access Sequence: 4-digits code & description. 
    4) Assign condition table to access sequence. Select Accesses line item and Go To Fields. Fields will display the fields we have selected in the condition table i.e. sales doc type. Maintain Output Types:BA00: Order Confirmation Select BA00 & Copy & Rename. Give the same 4-digit code as given to access sequence. You Can Maintain: Languages of Output Partners (to whom you need to send output) Print Program- print specification Sap Script- layout Assign Output Types to Partner Functions: go to new entries & assign your output type to partner functions. Maintain Output Determination Procedure: V10000 (Standard Procedure)here you select communication medium Email.
    Go to new entries and create your own 6-digit code with description. Select the procedure, go to Control Data. Here mention the output type i.e. condition type and leave requirement and manual only columns as blank. Determination Rule: link the 6-digit procedure code to doc types. Create Condition Records: VV11. Select document type and click on Communication. Mention partner function, medium, time. Output device: LP01, Spool request Name: SD_003, Suffix 2: order_confir & flag on print immediately. Once you press enter you will come across 2 key combinations: Sales organisation/ Customer Number: fill SO, Customer No, Partner Function Abbreviation, Partner to whom the output should be sent, time, medium, language. It contains: Sales Orgnisation, Customer, Partner Function (The abbreviated form of the name that identifies the Partner) (During output determination, the system determines the recipient of the output from the master record for the specified partner function. In this field, you can explicitly specify a recipient that will override the standard partner. There must also be a master record for the partner that is specified explicitly.), Medium, Time & Language.} Order Type: Document Type, Partner Function (abbreviation), Partner, Medium, Time & Language. Path For Output Determination For Sales Documents: Logistics -> Sales/distribution -> Master data -> Output -> Sales Document -> Create (t-code VV11) Path for Output Determination
    I hope this will help you.....
    Regards
    Deepak

  • Need to configure output type for adobe form

    Hello All,
    I need to configure output type for Adobe Form thru NACE. What would be print program and how do I call my form from that program? and, what would be the FORM routine for that form in NACE?
    I'm little confused, Pls I need your help.
    Thanks in advance,
    Chandra

    Hi,
    Just before few weeks we did this task.
    Say for example if you want to print PO details through ADOBE form instead of normal sapscript layout or standard MEDRUCK, you can follow the following steps.
    1. Design the form in SFP tcode, by passing the necessary inputs through form interface.
    2. Then use tcode tcode NACE and select EF as application and click output types button on the          application tool bar. Select NEU output type and double click processing routines on left side.
    3. Then, in the right side of the screen we can see the calling program and the form (may be sapscript or smartform) whatever used.
    4. For form names we have two options in NACE tcode.
    One is Form and the otherone is PDF/Smartform Form. If you are using adobe form give your form name under PDF/Smartform and also select PDF under the type option in the same screen.
    This worked perfectly for us. But pass the required parameters to the form from the routine used in standard program.
    If any queries please post it.

  • Output determination for PO

    Hi, I don't have much knowledge,waht are the steps and settings  required to maintain output determination for purchase order and material document.
    Thank you.

    Hi,
    PO Output
    Output of Purchase Order
    1. Condition Table
    SPRO > Material Management> Purchasing -> Message -> Output Control->Condition Tables->Define Condition Table for Purchase Order
    Select:
    Purchasing Doc. Type,
    Purch. Organization,
    Vendor
    2. Access Sequences
    SPRO -> Material Management-> Purchasing -> Message -> Output Control->Access Sequences->Define Condition Table for Purchase Order
    3. Message Type
    SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Types->Define Message Type for Purchase Order
    4. Message Determination Schemas
    4.1. Message Determination Schemas
    SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Schema->Define Message Schema for Purchase Order-> Maintain Message Determination Schema
    4.2. Assign Schema to Purchase Order
    SPRO -> Material Management-> Purchasing -> Message -> Output Control->Message Schema->Define Message Schema for Purchase Order-> Assign Schema to Purchase Order
    5. Partner Roles per Message Type
    SPRO -> Material Management-> Purchasing -> Message -> Output Control-> Partner Roles per Message Type ->Define Partner Role for Purchase Order
    6. Condition Record
    Navigation Path: SAP Menu-> Logistics -> Material Management -> Purchasing-> Master data->Messages-> Purchase Order-> MN04-> Create
    Now you create PO (ME21N) and save it. Go to ME22N and print the PO by giving output type.
    GR Output
    Output of GR
    After setting table, access sequence and output type for GR,run MB02 transaction, enter material document number. Double click one line item and select messages. Separate screen will be opened to configure outputs. Give the required fields and save the document. Now Run MB90, you can take printout. Output Type: WE03 or WE01 or WE02
    Regards,
    Biju K

  • Output determination for Customer Account group - A brain teaser

    At the place of configuration for Account groups, there is a field called Output Determination which has values like DB001, DB002 etc which says output for sold to, ship to and so on...
    What is the purpose of maintaining output determination procedure at the account group level?
    And also, where can i do the complete output determination for it? Like i could see Output determination for sales activities, sales documents, billing documents and shipping...But no where in the img screen, i found a place where i can configure these? Any ideas?

    In SAP, we send different output types(read documents) for Inquiries, quotations, orders etc. to relevant partners (read contact persons) sold-to party, ship-to party etc. thru various transmission mediums like ex. Print, Fax, e-mail etc.
    Output can be determined by using component output determination procedure. System should know from where the output is to be determined whether from IMG or from customer A/C group.  This is depended upon the control that we can activate or deactivate in "Check access for condition type" in definition of the output type (T.Code: NV03)
    Output Determination:
    IMG > Sales and Distribution > Basic Functions > Output Control > Output Determination  Output Determination Using the Condition Technique > Maintain Output Determination for Sales activities/ Sales Documents etc.
    Regards
    AK
    Reward points if helpful

  • Output determination for PO and MIGO

    HI,
    Please provide me complete config of output determination for PO and MIGO.
    PO print out.
    GR, GI,TP, cancellation and return   print out
    Uts

    Hi,
    Please go through these steps you can get the GRN Printout
    1. Maintain the Printer Name in SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Printer Setting
    Enter the local printer where you want to print your Goods posting document
    2. Ensure that in SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Item Print Indicator, 1 stands for Matl Doc print out
    3. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Gen Settings->Print Version, maintain Print Version 2
    4. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Print Control->Maintain Print Indicator for Goods Receipt/GI/Transfer Posting Documents
    Here for Particular mvt type 101,201,121,311 etcu2026 Maintain the Print item as 1--Material document printout
    5. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Output Determination->Maintain Output Types, for the Output types WE01, WE02 and WE03, ensure the following--
    Select the particular Output type then goto Details
    a. Default Values: Dispatch Time is 3 or 4 as per reqmt. and Transmission medium is 1
    b. Print Parameter is 7
    6. In SPRO->Matl Mgmt->Inv Mgmt and Phy Inv->Output Determination->Printer Det->Printer Determination by Plant/Str Loc, Maintain the Output device for all your Plants
    7. Go to MN21, for Tr Type WE, Print Version 3, maintain Print Item as 1.
    Now the settings are ready for Printing Material doc
    8. While doing MIGO, ensure that in General Tab, you get "3 Collective Slip" beside the Print Indicator and you tick mark the field.
    9. Now depending on the setting in 5a, the Matl doc is printed. If it is 3, you have to print it using MB90. If it is 4, it is printed immediately.

  • Output Determination for Sales Documents distributed by fax/email

    Hi Experts,
    Can some one guide me regarding what all need to be done to maintain output determination for Sales documents to be distributed by fax/email.
    Thanks in advance...
    Regards
    Vamsi

    Hi Vamsi,
    Please go through this link it will help you about Output process in SAP R/3 for sales documents and billing documents.
    http://help.sap.com/saphelp_47x200/helpdata/en/93/745017546011d1a7020000e829fd11/frameset.htm
    I hope it will help you,
    Regards,
    Murali.

  • Output determination for Reservations

    Hi,
    Is there any who is having any idea about the output determination for Reservation.
    Once the reservation is created through MRP, user gets the print out.
    Please help
    Sheetal

    you can list all reservations in MB25
    And display in MB23..
    But not possible to take print...take help from abap person..
    Regards
    Priyanka.P

  • Output determination for Invoice

    Hi
    Pls help me with the configuration details for setting message/output determination for Invoice.

    Hi Vijay,
    Please have a look at the link
    <a href="http://www.erpgenie.com/sap/sapedi/messagecontrol.htm">Invoice Message Control Configuration</a>
    Hope this Help you,
    Regards,
    Lijo Joseph

  • OUTPUT DETERMINATION FOR ACCOUNT GROUPS

    dEAR experts,
    Kindly write to me where to maintain output determination for customer account groups.
    Kindly help.
    Kind Regards
    biju

    Hi ,
    Output procedure in OTD2 is for other purpose .It is not output determination in sales document .
    Whatever field availabvle in field catlog we can determine the output in sales document .If the field is not available in field catlog than we can create the new filed and same field need to create in sales table .
    For your case , Account group  field is not available in field catlog but you can use Customer group (KDGRP) for output determination .
    Regards ,
    Sunil

  • Output Determination for inquiry

    Hi,
    Can anybody plz tell how do i make Output determination for
    1.) Inquiry
    2.) Quotation
    3.)Contract

    set the condition records for all these sales document types using VV11 t.code. ie create condition records for sales documents.
    like for example incase of OR we use BA00.
    inquiry AF00
    thanks
    sadhu kishore

  • Output Determination for Material movement

    Hi All,
    I am configuring output Determination for Material movement.
    In my case, am doing the config when the movement type is 311, we want to generate IDoc.
    i have configured everything, output type,output Determination schema..
    When i am trying to maintain the condition record for the same through MN21,
    here i am facing one problem on Partner Function.
    Here what partner functuion i'll give.
    waiting for all valuable response.
    Regards
    Indrashish

    Hello Indrashish,
    Maintain that output type as partner independent.
    This will help.
    Regards
    Arif Mansuri

  • Output determination for Shipping order confirmation

    Hi,
    Im new to the SD module.
    I want to send the BOL  information to XI as idoc DESADV.DELVRY03.
    How am i supposed to do this? Should i create a new Output type?
    I guess since im sending this to XI i should maintain the partner function as LS right?

    Ive uploaded a document on the steps i have done for setting up a Output type at:
    http://www.scribd.com/full/16969034?access_key=key-1tw12d6pow1xa4r6afcs
    or
    http://www.scribd.com/doc/16969034/Output-Determination-for-Delivery
    Still im not successfull in generating the IDOC. Please help.

  • Output determination for Transfer Order(WMTORD)

    Hi Friends,
      My Requirement is to send an idoc to an external warehouse when i save Transfer Order.
      For that i have created a Partner Profile with message type WMTORD.
      When i save the transfer Order if the warehouse number and storage type matches to specific numbers then it has to trigger the given partner profile..for this usually we will do output determination.
    Please help in doing the output determination for the above case..i know normal output determination procedure from NACE transaction.But warehouse mangement it would be defferent.please help me,,
    Thanks a lot.
    regards,
    Ravimacha

    Hello Ravi,
    I would like to generate an outbound idoc (using Message Determination/Control)  when a delivery is created (via tcode VL01N).  I created a Partner Profile with message type WMTORD.
    In setting up the Partner Profile: Outbound Parameters, I didn't find a standard SAP Process Code.   Did you find one, if so, what would that be?
    (I've found process code WMT1 but it is for inbound.)
    Thanks in advance,
    Millie

Maybe you are looking for

  • Nat inside to outside, IP not in same subnet as outside IP

    I already posted this but cant seem to find the post now, so re-posting. We have 10 IP's being NAT'd, all working ok.  I need a servers outbound source address to be translated to an IP that is not in the same subnet as the outside IP: Outside IP = 1

  • WAP Key Issue -- Model WRT54G

    Hey guys. Here is the deal. I just moved in with a couple of roommates. The guy that was living in my room before I left put together the wireless network. The guy left on bad terms with the other roommates. So, what is going on now is we have no ide

  • Worktiem and Terminating Event with Condition

    System : SAP Solution Manager 4.0 Business Object : BUS2000116 Custom Screen No.     Text               Position          Status      1.     IT manger                           Position1           2.     IT Integration manger                     Posi

  • Set File - Open to open new window as maximized

    I'm trying to figure out how to setup Pages, so that when a new, blank document is openend, the window spawns the full size of my desktop. Not the option where it takes the whole screen (that's called full screen view I believe). Just to a state wher

  • Image quality affected by spillage?

    Spilt a small amount of coffee on Macbook Pro trackpad but working fine now as far as I can see. Accident took place a few days ago. However is it possible for image quality to be affected when watching Netflix etc?