Output Error in Billing

Hi,
We have currently configured the VAT for higher secondary Cess and VF02 getting the Error in billing print preview and printing. for the higher secondary cess appears twice in the printing I have checked it in pricing procd.and also ine the Billing output.
But all configuration is fine there in Billing and Pricing Prod., help me solving this Error.
regards
Shashank.

have a look to the print flag control in V/08 at condition level.
If it is ok, then ask to a developer to debug the printing program.
Regards
Roberto

Similar Messages

In Forms Unable to print output for particular billing document number

Hi All
I am working forms
Here I am Unable to print output for particular billing document number, I am getting Error message like 'Graphic cannot be displayed'.
can anybody tell me the solution
Regards

Hi Chinna,
Please check that the billing document may be using different logo and which may not be avilable or not fitting in the window. (May be graphic is over flowing the window dimensions)
Lanka

Account determination error in Billing

Dear Expert,
I create one billing doc(1840000318) based on SO:1810000296. But in the posting status it is showing "Posting document not created(account determn error) in billing. I did not found any FI relavant docs for this billing in open item customer list.
*Anyone can advice me why the FI docs not created automatically..???
**Do you think there any missing configuration set?
***Or if I cancel the billing docs then it will okay or not ?
Thanks & b.Rgds
Bishnu

Hi Bishnu,
Check Points for Account Determination.
1. Ensure Cutomer master (Xd02)Sales Area Data- Billing Tab-- Acc Assign Grp ---Should be maintained
2. Material Master -
Sales Org-2----
Acc Assign Grp..Should be maintained.
3. In VKOA maintain
Application- V Chart of Accounts--Sales Org ---Acc Assgn Gp Of Cust -Acc Assgn Gp of Material-Acc Keys (ERL,ERS,ERF)----& G/L Account.
4. In ur Pricing Procedure i.e V/08... Maintain Reqt -2 corresponding to ERL,ERS,ERF. & Subtotal =9 in front of net total.
Revert for further clarification.
Regards
Amit Gupta

External Hard Drive Input/Output error

I recently started having problems with an external hard drive setup that I did not have problems with prior to upgrading to 10.5.5 and trying to setup the drive to be compatible with Time Machine.
The hard drive enclosure that I have has 2 bays for two SATA drives. I have used this enclosure without any problems until I tried to get 1 drive to act as the backup drive for Time Machine and the other to be storage. I formatted them using Drive Genius. I used the option for GUILD or GUIL which it said was the better format for using with Time Machine.
The first problem I ran into since upgrading and reformatting the drives is I got an "input/output" error the first couple times I connected the drive via USB to my Mac. I could still use the drives but I got weird errors every once in a while like "input/output error" or "device was not ejected properly" even though the device had not been unplugged.
Now the drives will not mount using OS 10.5.5. The drives show up when I open Disk Utility, but I cannot get them to mount. I have ran Disk Utility First Aid, and it says the drives are fine. There is one error that shows up when I run the "Repair Disk" feature. It reads "Invalid content in Journal". But Disk Utility also says "The volume was repaired successfully".
I have seen some posts when I do a search in google about this issue and it seems this is a known issue. Every suggestion I see says to insert your Tiger DVD and reformat the drive using that and the problem will be solved. The only problem with that is I have a lot of important files on the drive that I cannot lose. I had the files backed up until I moved them to the new drive a while back. Now I do not have a backup because I was in the process of switching to bigger drives and erased the old drives after doing so because everything was working fine.
I am hoping someone out there may have some suggestions (other than erasing the drive) to get my dives to mount so I can transfer the data off to another drive and reformat after.
Thanks,
Paul Rugg

Thanks for the suggestion.
Do you think that would work better than Drive Genius? I bought Drive Genius 2 and it does not even see the drives when they are plugged in unlike Disc Utility which can see the drives but cannot mount either one.
Maybe this following post I made to a different questions may help. The data on the drive is other buying another program for if it will work. I think my next step may be to go over to a friends place and try to mount the drives on his computer and transfer stuff off if they connect.
text below posted to other question relating to external hard drive problem.
I have recently had the same mounting issue with my new external hard drive. I just purchased a new 750Gb Western Digital Sata drive and got everything transfered over to it. Immediately, I got an error saying that the drive had been ejected incorrectly even though it was still plugged in. I was a little curious. I restarted the computer (hard drive still plugged in via USB 2.0) and the drive showed up just fine. I plugged another 250Gb drive into the same case (2 bays) and the 250GB drive showed up just fine.
Well, I then noticed there was an OS upgrade available when I ran Software update so i ran it and when I rebooted the drives were gone. I can see the drives in Disc Utility, but they will not mount. Drive Genius cannot see either disc. Disc Utility says I need to repair the drives, but when I do it says they are fixed but they don not mount.
The problem really seems to be related to mounting USB external drives. I got ahold of 2 seperate external firewire hard drives and one shows up just fine while the other has the same problem (both work on other systems. I would try wiping the drives and reformatting but ALL MY stuff is on them and not everything has been backed up. Yuck! I have not tried connecting my hard drive to another Mac yet.
The drives being used are #1 Maxtor Maxline Plus II 250GB SATA/150 HDD 1.5b/s 7Y250m00654ra
and #2 Western Digital WD7500AACS WD Caviar GP Green Power drive.
I have another post similar to this and I have not received any feedback, but I have been doing my own searching and have found similar posts on the net.
Anybody have any clue what might be going on here? It really seems to be related to my upgrade.

I am in mavericks disk utility recovery mode as my mac book will not boot up & stays only on the grey apple screen. When I verify the disk I get open error5 :input /output error on Syst stuck on 1 minute pouring out over 50 error messages & still counting

I am in Mavericks disk utility recovery mode as my mac book pro will not boot up & stays on the Apple grey screen . When I verify disk permissions I get
Open error 5:"input/ output error" on syst with over 50 of this messages & still counting . Disk Utility says 1 minute
But this has been going on for over 10 mins .
I can not verify disk or repair disk .
I have tried to reinstall mavericks operating system but it says my hard drive is locked which is very strange .
Does anyone know what is going on here ?
My system looks like it has been totally corrupted . Thanks Andrew

Could be. The "lock" isn't actually looking for a password.
WARNING: This will completely erase the ENTIRE hard drive.
What you would need to do is boot to recovery > disk utility > select the MAIN drive on the left side > partition > change partition layout from CURRENT to 1 PARTITION > ensure on the right side it says Format : Mac OSX Extended (Journaled) then push APPLY.
Then if it will allow us, close the windows until you see the 4 options popup again and select "Reinstall Mac OS X" select the Mac HD and you should be good to go!

Error while executing SSIS package - Error: 4014, Severity:20, State: 11. A fatal error occurred while reading the input stream from the network. The session will be terminated (input error: 109, output error: 0)

Hi,
We are getting the following error when running our SSIS packages on Microsoft SQL Server 2012 R2 on Windows Server 2008 R2 SP1:
Error: 4014, Severity:20, State: 11. A fatal error occurred while reading the input stream from the network. The session will be terminated (input error: 109, output error: 0)
SQL Server Data Tools and SQL Server Database Engine reside on the same server.
We tried the following:
Disabling TCP Chimney Offload
Installed Windows Server 2008 SP1
Splitting our SSIS code into multiple steps so it is not all one large continuous operation
The error occurs during a BulkDataLoad task.
Other options we are investigating with the engineering team (out-sourced, so delayed responses):
Firewall configurations (everything is local, so this should not make a difference)
Disabling the anti-virus scanner
Are there other things we can try?
Any insight is greatly appreciated.
Thanks!

Hi HenryKwan,
Based on the current information, the issue can be caused by many reasons. Please refer to the following tips:
Install the latest hotfix based on your SQL Server version. Ps: there is no SQL Server 2012 R2 version.
Change the MaxConcurrentExecutables property from -1 to another one based on the MAXDOP. For example, 8.
Set "RetainSameConnection" Property to FALSE on the all the connection managers.
Reference:
https://connect.microsoft.com/SQLServer/feedback/details/774370/ssis-packages-abort-with-unexpected-termination-message
If the issue is still existed, as Jakub suggested, please provide us more information about this issue.
Thanks,
Katherine Xiong
Katherine Xiong
TechNet Community Support

Error while billing document releasing to accounting.

Hi Experts,
Please give me possible reasons for below error while billing document releasing to accounting.
"Valuation with material cost estimate: error with product "500258045"
Message no. KE350
Diagnosis
In Profitability Analysis (CO-PA), the system tried to valuate a line item using the current standard cost estimate.
In order to determine the current plan period, the system needs to read the valuation segment of the material master.
The system has found that the current plan period is not filled forproduct "BDE98561002" in plant "9856".
Display material (View: Costing)
The system looked for the material cost estimate using costing key "ZK1", as defined in the Customizing settings for CO-PA.
System Response
The document cannot be processed.
Procedure
Contact your system administrator".
I have checked CKR1 transaction there were no cost estimates with KF costing status.
NOTE: Material Ledger Activated.
Please suggest the possible reasons and what to check?
Regards
Chandra.

Check the cost estimate that is mentioned against the Costing key ZK1 whether it exists in the system and as you are saying there seems to be no cost estimate for the said material.
Hence release the std cost estimate for the said materia using CK11n or CK40n

Disc image input/output error

When burning a disc image using disc utility, I get the ever so popular input/output error message. I cannot find anywhere on these posts a solution to this problem. It is not dirty discs, etc. It happens when I try to copy dvd's... which are not licensed, etc.

Could be so many things, Input/Output errors are generally loosing contact with a device for a variety of reasons, do you get any error # with that?
Open Console in Utilities & watch for more info whn you try to burn, or open the Disk Utility Log if there.

"input/output error' when making disc image from DVD

I've had problems installing Logic, and a Pro Apps Genius at Applecare suggested I try making an image of the problematic DVD (Audio Content 1) and then trying an install that way.
While I can make an image of the Install disc to my desktop fine, the Audio Content 1 disc reports an "input/output error".
This means I'm unable to copy the disc and then successfully install my Logic Studio.
Any ideas?

Thanks for your answer.
Yes, I thought that might be the case - but I'd taken my Mac and Logic disks to a Genius bar, and the 'Genius' had said he'd fixed the issue. I just wish he'd explained what he did and why he didn't replace the faulty disk(s)!
But is there any way around having the claim a disk, now I'm living abroad and my 'warrantee' has run out? It's going to be a pain in the fundament trying to claim a replacement set.

Input/output error when copying a DVD

I created A DVD some time ago using Roxio. It plays in DVD Player on my Mac Pro, but I can't create a .dmg using Disk Utility. I always get "Input/Output error". I got the same result on my wife's newer Apple. I tried to Restore it but can't, and Verification shows no problems that I can see. I am able to copy DVDs created on Final Cut Express just fine. Any suggestions to help me create copies of an old DVD I love?

I just figured out how to get around the problem. Download Burn and use it to burn the VIDEO_TS file to a new disk. It must be something that Apple adds to make it hard to copy DVDs made from non-Apple software.

Am getting PCM output error message when trying to play a video from iPad2 on my TV

The movie was purchased on iTunes store. I connected the iPad2 through the adapter via HDMI straight to the TV and I have a Bose Lifestyle system for surround 5.1 sound. After a few minutes and every few minutes after that the movie would blur and blackout then it would come back. Eventually I got a PCM OUTPUT error message onscreen. How do I resolve this problem?

I have been able to open a few items in iTunes, but have not been able to play even those videos from my Apple TV. I can airplay them from the computer, but cannot access them directly from Apple TV. This is a bit frustrating.

Is it possible to get an output error when there is no error?

Ok so I did a picture slide show in flash CS5 where I used actionsript 3. I added a button so that when you click it will go to the next picture. Then on the last one it will go from the last picture and reset back to the first picture. I even added some music with a stop and play button so if you are playing some music and say you get tired of it while looking through the pictures you can click the play/ stop button and it will stop.
I got the following error in my output error-
TypeError: Error #1034: Type Coercion failed: cannot convert flash.display::MovieClip@64b30f99 to flash.display.SimpleButton.
at flash.display::MovieClip/nextFrame()
at johnexercise3_fla::MainTimeline/fl_ClickToGoToNextFrame_5()
This error occurs when I go to test movie about half way through my photo gallery this message will pop up. The thing about it is that despite the error all my images load and play correctly as they should and my sound plays and stops as I ask it too. I guess I could ignore the error seeing as how everything works 100% fine despite the error but I was just wondering if this error is something serious or if I should be concerned? If it is something to worry about then what can I do to fix it? Again as I said the error is there but the test movie shows everything perfectly fine.

Sorry. I may have mis-spoken. I have 2 image gallery projects. One of them has a button that you click to go from one picture to another along with a stop and play button for the music. Now my second project which is in seperate flash document is the same exact project except that instead of using a button to click from one picture to another I am clicking on the picture itself to get from one image to the next. My 2nd project is the one that had the error. And I also kept the stop and play music button on that one. I am not sure about anything else that would have caused this code error but it went away for now. For some reason it was giving me this error and I closed out of flash and restarted as it kept acting funny at school today and for some reason the error went away. I will keep what you and kglad said in case the error comes back just do that. Thanks again to the both of you.

Problem in customizations after Issue Output of a Billing Document (VF02)

Dear Friends,
I am facing some problem while I do repeat output of a Billing Transaction. (VF02->GoTo->Header->Output). There are some customizations done in our system that whenever an Output is processed in our system, an xml file should be created and placed on application server (Which would then be printed in some Legacy system).
The custmizations for this has been done SPRO -> Sales and Distribution -> Billing Documents -> Invoice Lists ->Maintain Output for Invoice Lists -> Output Type.
Now my problem is that XML file creation program works in the Dialog mode and I am able to create the XML file and make an entry of this file in a Z table as per my program logic.
But when the processing is automatically through some files coming from application server, some of the files are missed. I want to figure out under which conditions my program to create XML file fails.
I tried debugging this program by puttinga hard coded break-point as well but the control does not stops there.
Could any one please help me how can we debug the program in such scenario.
Thanks a Lot for your kind help!!!
Regards,
Lalit Kabra

There was some issue in the RFC setup of our system because of which when fies were processed in bulk, some of them were missed out. It was like connection issue. Hence I did not put the soln here as I could not get the answer of this problem by doing some thing in ABAP.
Apologies for the same.
Regds,
Lalit

Account determination error at billing level

Hi,
for Account determination error at billing level
i checked the line item level for the material by highlighting the item, then GO TO > ITEM > ITEM DETAILS. here 5 line items are there , 4 line items have same "Acct asgnmt grp" and 1 line item is different at order level. i gess this is the problem if am wrong please correct me.
thanks
Edited by: pandu123 on May 26, 2011 2:24 AM
Edited by: pandu123 on May 26, 2011 2:32 AM

Hi Pandu
A/c deterimation error. 1st you check in customer master sales area data billing tab page with account assingment and go to material master u select particular material see in sales organization 2 tab with account assignment. and go to T.Code VKOA check the combination which is assiged A/c assingmnet group of customer and matrial account assingment group. If it is not come goto VFX3 and specify the customer execute and click on RELEASE FLAG. If it is error go to log see the digonsis.
Kind Regards
Chandra Mouli A

I'm trying to backup a my harddrive with disk utility but I'm getting an error Unable to create Backup.dmg" (input/output error). Is there any other way to save my data? I believe my hard drive is failing or corrupt file. I can't boot up. Grey screen

I'm trying to backup a my hard drive with disk utility but I'm getting an error Unable to create Backup.dmg" (input/output error). Is there any other way to save my data? I believe my hard drive is failing or corrupt file. I can't boot up. Grey screen and spinning wheel. I've tried everything https://discussions.apple.com/message/20580424#20580424
any help will be greatly appreciated.

Check here. Also have you done a TimeMachine back up?
http://support.apple.com/kb/TS2570

Output Error in Billing

Similar Messages

Maybe you are looking for