Output not found
I try to get the value of a probe into LabVIEW, I use the LabVIEW Multisim connectivity toolkit.
However the output does not exist, here is the code I use:
I check the cuurent outputs with the ActiveX method EnumOutputs, if I verify that the output I want is actually I have no issue.
However the method 'GetOutputData' returns error -2147467259. And if I look up the last error message from multisim I get 'Output not found'.
Ton
Message Edited by TonP on 05-29-2009 12:35 PM
Free Code Capture Tool! Version 2.1.3 with comments, web-upload, back-save and snippets!
Nederlandse LabVIEW user groep www.lvug.nl
My LabVIEW Ideas
LabVIEW, programming like it should be!
Attachments:
MultiSimmConnect.PNG 5 KB
TonP ,
First check the output of "Multisim_EnumOutputs" and verify that there are assigned/enumerated probes listed. If so, my guess is that based on your sample size / simulation settings, the output may not be ready. Usually you will want to use "Multisim_OutputReady" - put this in a loop and if TRUE, then read the output samples.
Remember if you are waiting for ms or seconds, you may have to wait for multiple seconds or minutes even for the simulation to complete. By the way, the settings from the menu, under: Simulate -> Analyses -> Transient Analysis... dictate the transient analysis settings from the Multisim API (not the Interactive Simulation Settings).
Also I find that the best method to read data during a continuous simulation is to use "Multisim_SetOutputRequest" together with "Multisim_RunSimulationUntilNextOutput" and wait for a paused condition. When paused, the outputs will be ready to be read, and then you can use "Multisim_RunSimulationUntilNextOutput" again. This will allow you to run other things in a state machine, loop, etc.. and occassionally check the simulation status using "Multisim_SimulationState" to see if data is available.
Let me know if you'd like me to post an example of this.
Regards,
Patrick Noonan
Business Development Manager
National Instruments - Electronics Workbench Group
50 Market St. 1-A
S. Portland, ME 04106
Email: [email protected]
Tel. (207) 892-9130
Fax. (512) 683-7754
Similar Messages
-
Hdmi output not found under playback in the control panel
I am trying to get sound to go through my tv with my HDMI cable. I looked in the control panel under sound - playback. I do not see the option of the hdmi output. I have right clicked on the speaker and clicked disabled and it still does not come up.
I have idt high definition audio codec driver on my computer. Is it compatible?
I have also tried to connect an rca cable to the headphone jack and hook it to the tv like that and sound still didn't work?
Do you have any suggestions?Hi again tfinley,
It is good to hear back from you!
Since you have updated all of the original drivers on your system, and your notebook still does not display an HDMI audio option, I recommend returning your system back to a previous restore point when this option was available. This can be done by following the steps in this document on Using Microsoft System Restore (Windows 8).
Should the problem continue, I suggest performing a backup and recovery of your operating system. This can be done by following the steps in this resource on Backing Up Your Files (Windows 8), as well as Performing an HP system recovery (Windows 8). This should return your system back to factory defaults.
If the issue persists, please call our technical support at 800-474-6836. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
http://www8.hp.com/us/en/contact-hp/ww-phone-assist.html
I hope this helps!
Regards
MechPilot
I work on behalf of HP
Please click “Accept as Solution ” if you feel my post solved your issue, it will help others find the solution.
Click the “Kudos, Thumbs Up" on the right to say “Thanks” for helping! -
We have a SharePoint Enterprise 2013 system at RTM level. We've installed Workflow Manager 1.0 by following the steps at
http://technet.microsoft.com/en-us/library/jj658588.aspx. For the final step of Validating the Installation we created a simple list-level workflow and verified that the workflow
is invoked successfully. This is working successfully, but only for a single user. If other users in the same site collection try to invoke the workflow on this same list we get the ULS Log Error:
Claims Authentication af3zp Unexpected STS Call Claims Saml: Problem getting output claims identity. Exception: 'Microsoft.SharePoint.SPException: The specified user or domain group was not found. --->
System.Security.Principal.IdentityNotMappedException: Some or all identity references could not be translated.
followed by:
Failed to issue new security token. Exception: Microsoft.SharePoint.SPException: The specified user or domain group was not found. ---> System.Security.Principal.IdentityNotMappedException: Some or all identity references could not be translated.
(as details below).
All accounts that are attempting to use the Test Workflow (both working and non-working user accounts) are valid AD accounts and are included in the User Profile Sync that runs nightly. All have Contribute or Design permission level (and for testing,
Full Control).
What could cause the Claims Authentication to fail when certain users attempt to launch the workflow?
Thank you for your response.
Jim Mac.
08/29/2013 10:22:51.94 w3wp.exe (0x2020) 0x26D8 SharePoint Foundation
Claims Authentication af3zp Unexpected STS Call Claims Saml: Problem getting output claims identity. Exception: 'Microsoft.SharePoint.SPException: The specified user or domain group was
not found. ---> System.Security.Principal.IdentityNotMappedException: Some or all identity references could not be translated. at System.Security.Principal.NTAccount.Translate(IdentityReferenceCollection sourceAccounts, Type targetType,
Boolean forceSuccess) at System.Security.Principal.NTAccount.Translate(Type targetType) at Microsoft.SharePoint.Administration.Claims.SPClaimProviderManager.GetProviderUserKeyClaim(IClaimsIdentity claimsIdentity,
SPClaim loginClaim) --- End of inner exception stack trace --- at Microsoft.SharePoint.Administration.Claims.SPClaimProviderManager.GetProviderUserKeyClaim(IClaimsIdentity claimsIdent... 94aa5c2d-fa45-9b83-b203-a92b20102583
08/29/2013 10:22:51.94* w3wp.exe (0x2020) 0x26D8 SharePoint Foundation
Claims Authentication af3zp Unexpected ...ity, SPClaim loginClaim) at Microsoft.SharePoint.Administration.Claims.SPClaimProviderManager.GetProviderUserKey(String
encodedIdentityClaimSuffix) at Microsoft.SharePoint.IdentityModel.SPSecurityTokenService.CreateTokenCacheReferenceFromTokenSignature(SPRequestInfo requestInfo, IClaimsIdentity identity) at Microsoft.SharePoint.IdentityModel.SPSecurityTokenService.AugmentTokenCacheReferenceClaim(SPRequestInfo
requestInfo, IClaimsIdentity identity) at Microsoft.SharePoint.IdentityModel.SPSecurityTokenService.AugmentOutputIdentityForRequest(SPRequestInfo requestInfo, IClaimsIdentity outputIdentity) at Microsoft.SharePoint.IdentityModel.SPSecurityTokenService.GetOutputClaimsIdentity(IClaimsPrincipal
principal, RequestSecurityToken request, Scope scope)'. 94aa5c2d-fa45-9b83-b203-a92b20102583
08/29/2013 10:22:51.94 w3wp.exe (0x2020) 0x26D8 SharePoint Foundation
Claims Authentication fo1t Monitorable STS Call: Failed to issue new security token. Exception: Microsoft.SharePoint.SPException: The specified user or domain group was not found. --->
System.Security.Principal.IdentityNotMappedException: Some or all identity references could not be translated. at System.Security.Principal.NTAccount.Translate(IdentityReferenceCollection sourceAccounts, Type targetType, Boolean forceSuccess)
at System.Security.Principal.NTAccount.Translate(Type targetType) at Microsoft.SharePoint.Administration.Claims.SPClaimProviderManager.GetProviderUserKeyClaim(IClaimsIdentity claimsIdentity, SPClaim loginClaim)
--- End of inner exception stack trace --- at Microsoft.SharePoint.Administration.Claims.SPClaimProviderManager.GetProviderUserKeyClaim(IClaimsIdentity claimsIdentity, SPClaim logi... 94aa5c2d-fa45-9b83-b203-a92b20102583
08/29/2013 10:22:51.94* w3wp.exe (0x2020) 0x26D8 SharePoint Foundation
Claims Authentication fo1t Monitorable ...nClaim) at Microsoft.SharePoint.Administration.Claims.SPClaimProviderManager.GetProviderUserKey(String encodedIdentityClaimSuffix)
at Microsoft.SharePoint.IdentityModel.SPSecurityTokenService.CreateTokenCacheReferenceFromTokenSignature(SPRequestInfo requestInfo, IClaimsIdentity identity) at Microsoft.SharePoint.IdentityModel.SPSecurityTokenService.AugmentTokenCacheReferenceClaim(SPRequestInfo
requestInfo, IClaimsIdentity identity) at Microsoft.SharePoint.IdentityModel.SPSecurityTokenService.AugmentOutputIdentityForRequest(SPRequestInfo requestInfo, IClaimsIdentity outputIdentity) at Microsoft.SharePoint.IdentityModel.SPSecurityTokenService.GetOutputClaimsIdentity(IClaimsPrincipal
principal, RequestSecurityToken request, Scope scope) at Microsoft.IdentityModel.Securi... 94aa5c2d-fa45-9b83-b203-a92b20102583
08/29/2013 10:22:51.94* w3wp.exe (0x2020) 0x26D8 SharePoint Foundation
Claims Authentication fo1t Monitorable ...tyTokenService.SecurityTokenService.Issue(IClaimsPrincipal principal, RequestSecurityToken request) at Microsoft.SharePoint.IdentityModel.SPSecurityTokenService.Issue(IClaimsPrincipal
principal, RequestSecurityToken request) 94aa5c2d-fa45-9b83-b203-a92b20102583Hi Aries,
I am facing issue with work flow where Workflow goes to Suspend mode.
I am facing an issue with SP2013 Custom Workflow developed using Visual Studio 2012.
Objective of the Custom workflow: User fills the form and submit, list get updated and workflow will initiate and go for the process.
Issue: After the deployment of WF, for first time when user is filling the form and submit, list is getting updated. But the Workflow Goes to "Suspend" mode. (
This Custom Workflow has a configuration file where we are providing other details including ID of Impersonator (farm is running under Claim Based Authentication).
Work flow works fine once when the Impersonator initiate the workflow (Fill the form and submit for approval) and everything works fine after that.
Following steps are already performed
1.Make sure User profile synchronization is started.
2.Make sure the user is not the SharePoint system user.
3.Make sure the user by whom you are logged is available in User Profile list.
4.Step full synchronization of User Profile Application.
From the ULS logs it seems the user's security token from the STS service and User profile service is not being issued.
Appreciate any thoughts or solution.
Following are the log files.
<-------------------------------Information taken from "http://YYYY.XXXXX.com/sites/xxxx/_layouts/15/wrkstat.aspx" where it is showing workflow status as "Suspend"------->
http://yyyy.XXXX.com/sites/xxxx/_vti_bin/client.svc/sp.utilities.utility.ResolvePrincipalInCurrentcontext(input=@ParamUser,scopes='15',sources='15',inputIsEmailOnly='false',addToUserInfoList='False')?%40ParamUser='i%3A0%23.w%7CXXXXX%5Csps_biscomdev'
Correlation Id: f5bd8793-a53c-2127-bfb1-70bc172425e8 Instance Id: 14a985a0-60c8-42db-a42c-c752190b8106
RequestorId: f5bd8793-a53c-2127-0000-000000000000. Details: RequestorId: f5bd8793-a53c-2127-0000-000000000000. Details: An unhandled exception occurred during the execution of the workflow instance. Exception details: System.ApplicationException: HTTP 401
{"error_description":"The server was unable to process the request due to an internal error. For more information about the error, either turn on IncludeExceptionDetailInFaults (either from ServiceBehaviorAttribute or from the <serviceDebug>
configuration behavior) on the server in order to send the exception information back to the client, or turn on tracing as per the Microsoft .NET Framework SDK documentation and inspect the server trace logs."} {"x-ms-diagnostics":["3001000;reason=\"There
has been an error authenticating the request.\";category=\"invalid_client\""],"SPRequestGuid":["f5bd8793-a53c-2127-8654-672758a68234"],"request-id":["f5bd8793-a53c-2127-8654-672758a68234"],"X-FRAME-OPTIONS":["SAMEORIGIN"],"SPRequestDuration":["34"],"SPIisLatency":["0"],"Server":["Microsoft-IIS\/7.5"],"WWW-Authenticate":["Bearer
realm=\"b14e1e0f-257f-42ec-a92d-377479e0ec8d\",client_id=\"00000003-0000-0ff1-ce00-000000000000\",trusted_issuers=\"00000005-0000-0000-c000-000000000000@*,[email protected]79e0ec8d\"","NTLM"],"X-Powered-By":["ASP.NET"],"MicrosoftSharePointTeamServices":["15.0.0.4420"],"X-Content-Type-Options":["nosniff"],"X-MS-InvokeApp":["1;
RequireReadOnly"],"Date":["Fri, 10 Apr 2015 19:48:07 GMT"]} at Microsoft.Activities.Hosting.Runtime.Subroutine.SubroutineChild.Execute(CodeActivityContext context) at System.Activities.CodeActivity.InternalExecute(ActivityInstance
instance, ActivityExecutor executor, BookmarkManager bookmarkManager) at System.Activities.Runtime.ActivityExecutor.ExecuteActivityWorkItem.ExecuteBody(ActivityExecutor executor, BookmarkManager bookmarkManager, Location resultLocation)
ULS Log
04/16/2015 15:22:03.70 w3wp.exe (0x1C74) 0x1AB8 SharePoint Foundation Authentication Authorization agb9s Medium OAuth request. IsAuthenticated=False, UserIdentityName=, ClaimsCount=0 f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.70 w3wp.exe (0x1C74) 0x1AB8 SharePoint Foundation Runtime ajd6k Verbose Value for isAnonymousAllowed is : False f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.70 w3wp.exe (0x1C74) 0x1AB8 SharePoint Foundation Runtime ajd6l Verbose Value for checkAuthenticationCookie is : True f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.70 w3wp.exe (0x1C74) 0x1AB8 SharePoint Foundation General 6t8b Verbose Looking up context site
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly in the farm SharePoint_Config_QA f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.70 w3wp.exe (0x1C74) 0x1AB8 SharePoint Foundation General 6t8d Verbose Looking up the additional information about the typical site
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.71 w3wp.exe (0x1C74) 0x1AB8 SharePoint Foundation General 6t8f Verbose Site lookup is replacing
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly with the alternate access url
http://inetdev. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.71 w3wp.exe (0x1C74) 0x1AB8 SharePoint Foundation General 6t8g Verbose Looking up typical site
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly in web application SPWebApplication Name=SPDEV - 80. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.71 w3wp.exe (0x1C74) 0x1AB8 SharePoint Foundation General 6t8h Verbose Found typical site /sites/testrpa2 (407ba20c-079b-4b99-9e70-f86e6e13ddde) in web application SPWebApplication Name=SPDEV - 80. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.71 w3wp.exe (0x1C74) 0x1AB8 SharePoint Foundation General 6t8b Verbose Looking up context site
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly in the farm SharePoint_Config_QA f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.71 w3wp.exe (0x1C74) 0x1AB8 SharePoint Foundation General 6t8d Verbose Looking up the additional information about the typical site
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.71 w3wp.exe (0x1C74) 0x1AB8 SharePoint Foundation General 6t8f Verbose Site lookup is replacing
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly with the alternate access url
http://inetdev. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.71 w3wp.exe (0x1C74) 0x1AB8 SharePoint Foundation General 6t8g Verbose Looking up typical site
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly in web application SPWebApplication Name=SPDEV - 80. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.71 w3wp.exe (0x1C74) 0x1AB8 SharePoint Foundation General 6t8h Verbose Found typical site /sites/testrpa2 (407ba20c-079b-4b99-9e70-f86e6e13ddde) in web application SPWebApplication Name=SPDEV - 80. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.71 w3wp.exe (0x1C74) 0x1AB8 SharePoint Foundation Monitoring b4ly Medium Leaving Monitored Scope (Request (GET:http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly)). Execution Time=18.7574119057031 f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.71 w3wp.exe (0x1C74) 0x1AB8 SharePoint Foundation General 6t8b Verbose Looking up context site
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly in the farm SharePoint_Config_QA f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.71 w3wp.exe (0x1C74) 0x1AB8 SharePoint Foundation General 6t8d Verbose Looking up the additional information about the typical site
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.71 w3wp.exe (0x1C74) 0x1AB8 SharePoint Foundation General 6t8f Verbose Site lookup is replacing
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly with the alternate access url
http://inetdev. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.71 w3wp.exe (0x1C74) 0x1AB8 SharePoint Foundation General 6t8g Verbose Looking up typical site
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly in web application SPWebApplication Name=SPDEV - 80. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.71 w3wp.exe (0x1C74) 0x1AB8 SharePoint Foundation General 6t8h Verbose Found typical site /sites/testrpa2 (407ba20c-079b-4b99-9e70-f86e6e13ddde) in web application SPWebApplication Name=SPDEV - 80. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.73 PowerShell.exe (0x29BC) 0x2B9C SharePoint Foundation General narq Verbose Releasing SPRequest with allocation Id {AF89E1D7-C47F-467B-8FD4-D7DC768820EE}
04/16/2015 15:22:03.73 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8b Verbose Looking up context site
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly in the farm SharePoint_Config_QA
04/16/2015 15:22:03.73 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8d Verbose Looking up the additional information about the typical site
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly.
04/16/2015 15:22:03.73 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8f Verbose Site lookup is replacing
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly with the alternate access url
http://inetdev.
04/16/2015 15:22:03.73 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8g Verbose Looking up typical site
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly in web application SPWebApplication Name=SPDEV - 80.
04/16/2015 15:22:03.73 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8h Verbose Found typical site /sites/testrpa2 (407ba20c-079b-4b99-9e70-f86e6e13ddde) in web application SPWebApplication Name=SPDEV - 80.
04/16/2015 15:22:03.73 w3wp.exe (0x1C74) 0x183C SharePoint Foundation Monitoring nasq Medium Entering monitored scope (Request (GET:http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly)). Parent No
04/16/2015 15:22:03.73 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8b Verbose Looking up context site
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly in the farm SharePoint_Config_QA
04/16/2015 15:22:03.73 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8d Verbose Looking up the additional information about the typical site
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly.
04/16/2015 15:22:03.73 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8f Verbose Site lookup is replacing
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly with the alternate access url
http://inetdev.
04/16/2015 15:22:03.73 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8g Verbose Looking up typical site
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly in web application SPWebApplication Name=SPDEV - 80.
04/16/2015 15:22:03.73 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8h Verbose Found typical site /sites/testrpa2 (407ba20c-079b-4b99-9e70-f86e6e13ddde) in web application SPWebApplication Name=SPDEV - 80.
04/16/2015 15:22:03.73 w3wp.exe (0x1C74) 0x183C SharePoint Foundation Logging Correlation Data xmnv Medium Name=Request (GET:http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly) f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.74 w3wp.exe (0x1C74) 0x183C SharePoint Foundation Monitoring nasq Medium Entering monitored scope (Application Authentication Pipeline). Parent Request (GET:http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly) f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.74 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8b Verbose Looking up context site
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly in the farm SharePoint_Config_QA f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.74 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8d Verbose Looking up the additional information about the typical site
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.74 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8f Verbose Site lookup is replacing
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly with the alternate access url
http://inetdev. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.74 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8g Verbose Looking up typical site
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly in web application SPWebApplication Name=SPDEV - 80. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.74 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8h Verbose Found typical site /sites/testrpa2 (407ba20c-079b-4b99-9e70-f86e6e13ddde) in web application SPWebApplication Name=SPDEV - 80. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.75 w3wp.exe (0x1C74) 0x183C SharePoint Foundation Claims Authentication ah25l Medium SPJsonWebSecurityBaseTokenHandler: ValidateActorIsSelfIssuer! Issuer '00000005-0000-0000-c000-000000000000' is not self
issuer. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.75 w3wp.exe (0x1C74) 0x183C SharePoint Foundation Monitoring nasq Medium Entering monitored scope (Getting Site Subscription Id). Parent [S2S] Getting token from STS and setting Thread Identity f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.75 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8b Verbose Looking up context site
http://inetdev/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly in the farm SharePoint_Config_QA f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.75 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8d Verbose Looking up the additional information about the typical site
http://inetdev/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.75 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8f Verbose Site lookup is replacing
http://inetdev/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly with the alternate access url
http://inetdev. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.75 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8g Verbose Looking up typical site
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly in web application SPWebApplication Name=SPDEV - 80. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.75 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8h Verbose Found typical site /sites/testrpa2 (407ba20c-079b-4b99-9e70-f86e6e13ddde) in web application SPWebApplication Name=SPDEV - 80. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.75 w3wp.exe (0x1C74) 0x183C SharePoint Foundation Monitoring b4ly Medium Leaving Monitored Scope (Getting Site Subscription Id). Execution Time=0.341314329055788 f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.75 w3wp.exe (0x1C74) 0x183C SharePoint Foundation Monitoring nasq Medium Entering monitored scope (Reading token from Cache using token signature). Parent [S2S] Getting token from STS and setting Thread
Identity f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.76 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General ajji6 High Unable to write SPDistributedCache call usage entry. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.76 w3wp.exe (0x1C74) 0x183C SharePoint Foundation Monitoring b4ly Medium Leaving Monitored Scope (Reading token from Cache using token signature). Execution Time=7.5931438213516 f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.76 w3wp.exe (0x1C74) 0x183C SharePoint Foundation Application Authentication ajwpx Medium SPApplicationAuthenticationModule: Failed to build cache key for user f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.76 w3wp.exe (0x1C74) 0x183C SharePoint Foundation Topology aeayb Medium SecurityTokenServiceSendRequest: RemoteAddress: 'http://localhost:32843/SecurityTokenServiceApplication/securitytoken.svc' Channel:
'Microsoft.IdentityModel.Protocols.WSTrust.IWSTrustChannelContract' Action: 'http://docs.oasis-open.org/ws-sx/ws-trust/200512/RST/Issue' MessageId: 'urn:uuid:fd5eba94-c39d-4667-89bd-089411c87f09' f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.77 w3wp.exe (0x0C48) 0x1318 SharePoint Foundation Topology aeax9 Medium SecurityTokenServiceReceiveRequest: LocalAddress: 'http://c1vspwfe01.vitas.com:32843/SecurityTokenServiceApplication/securitytoken.svc'
Channel: 'System.ServiceModel.Channels.ServiceChannel' Action: 'http://docs.oasis-open.org/ws-sx/ws-trust/200512/RST/Issue' MessageId: 'urn:uuid:fd5eba94-c39d-4667-89bd-089411c87f09' f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.77 w3wp.exe (0x0C48) 0x1318 SharePoint Foundation Monitoring nasq Medium Entering monitored scope (ExecuteSecurityTokenServiceOperationServer). Parent No f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.78 w3wp.exe (0x0C48) 0x1318 SharePoint Foundation Claims Authentication ah25l Medium SPJsonWebSecurityBaseTokenHandler: ValidateActorIsSelfIssuer! Issuer '00000005-0000-0000-c000-000000000000' is not self
issuer. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.78 w3wp.exe (0x0C48) 0x1318 SharePoint Foundation General narq Verbose Releasing SPRequest with allocation Id {F17590DF-49D9-439D-86BC-5AE6416BB765} f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.78 w3wp.exe (0x0C48) 0x1318 SharePoint Foundation General 6t8b Verbose Looking up site
http://inetdev/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly in the farm SharePoint_Config_QA f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.78 w3wp.exe (0x0C48) 0x1318 SharePoint Foundation General 6t8d Verbose Looking up the additional information about the typical site
http://inetdev/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.78 w3wp.exe (0x0C48) 0x1318 SharePoint Foundation General 6t8f Verbose Site lookup is replacing
http://inetdev/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly with the alternate access url
http://inetdev. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.78 w3wp.exe (0x0C48) 0x1318 SharePoint Foundation General 6t8g Verbose Looking up typical site
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly in web application SPWebApplication Name=SPDEV - 80. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.78 w3wp.exe (0x0C48) 0x1318 SharePoint Foundation General 6t8h Verbose Found typical site /sites/testrpa2 (407ba20c-079b-4b99-9e70-f86e6e13ddde) in web application SPWebApplication Name=SPDEV - 80. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.78 w3wp.exe (0x0C48) 0x1318 SharePoint Foundation General narq Verbose Releasing SPRequest with allocation Id {3847D5A4-15C6-4AF9-B062-E22BB555DF4F} f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.78 w3wp.exe (0x0C48) 0x1318 SharePoint Portal Server User Profiles ae0s1 High Identity claims mapped to '0' user profiles. Claims: [nameid: '', nii: 'windows', upn: '', smtp: '', sip: ''], User Profiles: f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.78 w3wp.exe (0x0C48) 0x1318 SharePoint Portal Server User Profiles ae0sr Unexpected UserProfileException caught.. Exception Microsoft.Office.Server.Security.UserProfileNoUserFoundException: 3001002;reason=The
incoming identity is not mapped to any user profile account in SharePoint. Possible cause is that no user profiles are created in user profile database. Contact your administrator. at Microsoft.Office.Server.Security.UserProfileIdentityClaimMapper.GetSingleUserProfileFromClaimsList(UserProfileManager
upManager, IEnumerable`1 identityClaims) at Microsoft.Office.Server.Security.UserProfileIdentityClaimMapper.<>c__DisplayClass2.<GetMappedIdentityClaim>b__0() is thrown. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.78 w3wp.exe (0x0C48) 0x1318 SharePoint Portal Server User Profiles ae0su High The set of claims could not be mapped to a single user identity. Exception 3001002;reason=The incoming identity is not mapped
to any user profile account in SharePoint. Possible cause is that no user profiles are created in user profile database. Contact your administrator. has occured. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.78 w3wp.exe (0x0C48) 0x1318 SharePoint Foundation Claims Authentication ae0tc High The registered mappered failed to resolve to one identity claim. Exception: Microsoft.Office.Server.Security.UserProfileNoUserFoundException:
3001002;reason=The incoming identity is not mapped to any user profile account in SharePoint. Possible cause is that no user profiles are created in user profile database. Contact your administrator. at Microsoft.Office.Server.Security.UserProfileIdentityClaimMapper.GetSingleUserProfileFromClaimsList(UserProfileManager
upManager, IEnumerable`1 identityClaims) at Microsoft.Office.Server.Security.UserProfileIdentityClaimMapper.<>c__DisplayClass2.<GetMappedIdentityClaim>b__0() at Microsoft.SharePoint.SPSecurity.<>c__DisplayClass5.<RunWithElevatedPrivileges>b__3()
at Microsoft.SharePoint.Utilities.SecurityContext.RunAsProcess(CodeToRunElevated secureCode) at Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(WaitCallback secureCode, Object param) at Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(CodeToRunElevated
secureCode) at Microsoft.Office.Server.Security.UserProfileIdentityClaimMapper.GetMappedIdentityClaim(Uri context, IEnumerable`1 identityClaims) at Microsoft.SharePoint.IdentityModel.SPIdentityClaimMapperOperations.GetClaimFromExternalMapper(Uri
contextUri, List`1 claims) f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.78 w3wp.exe (0x0C48) 0x1318 SharePoint Foundation Claims Authentication af3zp Unexpected STS Call Claims Saml: Problem getting output claims identity. Exception: 'Microsoft.Office.Server.Security.UserProfileNoUserFoundException:
3001002;reason=The incoming identity is not mapped to any user profile account in SharePoint. Possible cause is that no user profiles are created in user profile database. Contact your administrator. at Microsoft.Office.Server.Security.UserProfileIdentityClaimMapper.GetSingleUserProfileFromClaimsList(UserProfileManager
upManager, IEnumerable`1 identityClaims) at Microsoft.Office.Server.Security.UserProfileIdentityClaimMapper.<>c__DisplayClass2.<GetMappedIdentityClaim>b__0() at Microsoft.SharePoint.SPSecurity.<>c__DisplayClass5.<RunWithElevatedPrivileges>b__3()
at Microsoft.SharePoint.Utilities.SecurityContext.RunAsProcess(CodeToRunElevated secureCode) at Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(WaitCallback secureCode, Object param) at Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(CodeToRunElevated
secureCode) at Microsoft.Office.Server.Security.UserProfileIdentityClaimMapper.GetMappedIdentityClaim(Uri context, IEnumerable`1 identityClaims) at Microsoft.SharePoint.IdentityModel.SPIdentityClaimMapperOperations.GetClaimFromExternalMapper(Uri
contextUri, List`1 claims) at Microsoft.SharePoint.IdentityModel.SPIdentityClaimMapperOperations.ResolveUserIdentityClaim(Uri contextUri, ClaimCollection inputClaims) at Microsoft.SharePoint.IdentityModel.SPIdentityClaimMapperOperations.GetIdentityClaim(Uri
contextUri, ClaimCollection inputClaims, SPCallingIdentityType callerType) at Microsoft.SharePoint.IdentityModel.SPSecurityTokenService.GetLogonIdentityClaim(SPRequestInfo requestInfo, IClaimsIdentity inputIdentity, IClaimsIdentity
outputIdentity, SPCallingIdentityType callerType) at Microsoft.SharePoint.IdentityModel.SPSecurityTokenService.EnsureSharePointClaims(SPRequestInfo requestInfo, IClaimsIdentity outputIdentity, SPCallingIdentityType callerType)
at Microsoft.SharePoint.IdentityModel.SPSecurityTokenService.AugmentOutputIdentityForRequest(SPRequestInfo requestInfo, IClaimsIdentity outputIdentity) at Microsoft.SharePoint.IdentityModel.SPSecurityTokenService.GetOutputClaimsIdentity(IClaimsPrincipal
principal, RequestSecurityToken request, Scope scope)'. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.78 w3wp.exe (0x0C48) 0x1318 SharePoint Foundation Claims Authentication fo1t Monitorable STS Call: Failed to issue new security token. Exception: Microsoft.Office.Server.Security.UserProfileNoUserFoundException:
3001002;reason=The incoming identity is not mapped to any user profile account in SharePoint. Possible cause is that no user profiles are created in user profile database. Contact your administrator. at Microsoft.Office.Server.Security.UserProfileIdentityClaimMapper.GetSingleUserProfileFromClaimsList(UserProfileManager
upManager, IEnumerable`1 identityClaims) at Microsoft.Office.Server.Security.UserProfileIdentityClaimMapper.<>c__DisplayClass2.<GetMappedIdentityClaim>b__0() at Microsoft.SharePoint.SPSecurity.<>c__DisplayClass5.<RunWithElevatedPrivileges>b__3()
at Microsoft.SharePoint.Utilities.SecurityContext.RunAsProcess(CodeToRunElevated secureCode) at Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(WaitCallback secureCode, Object param) at Microsoft.SharePoint.SPSecurity.RunWithElevatedPrivileges(CodeToRunElevated
secureCode) at Microsoft.Office.Server.Security.UserProfileIdentityClaimMapper.GetMappedIdentityClaim(Uri context, IEnumerable`1 identityClaims) at Microsoft.SharePoint.IdentityModel.SPIdentityClaimMapperOperations.GetClaimFromExternalMapper(Uri
contextUri, List`1 claims) at Microsoft.SharePoint.IdentityModel.SPIdentityClaimMapperOperations.ResolveUserIdentityClaim(Uri contextUri, ClaimCollection inputClaims) at Microsoft.SharePoint.IdentityModel.SPIdentityClaimMapperOperations.GetIdentityClaim(Uri
contextUri, ClaimCollection inputClaims, SPCallingIdentityType callerType) at Microsoft.SharePoint.IdentityModel.SPSecurityTokenService.GetLogonIdentityClaim(SPRequestInfo requestInfo, IClaimsIdentity inputIdentity, IClaimsIdentity
outputIdentity, SPCallingIdentityType callerType) at Microsoft.SharePoint.IdentityModel.SPSecurityTokenService.EnsureSharePointClaims(SPRequestInfo requestInfo, IClaimsIdentity outputIdentity, SPCallingIdentityType callerType)
at Microsoft.SharePoint.IdentityModel.SPSecurityTokenService.AugmentOutputIdentityForRequest(SPRequestInfo requestInfo, IClaimsIdentity outputIdentity) at Microsoft.SharePoint.IdentityModel.SPSecurityTokenService.GetOutputClaimsIdentity(IClaimsPrincipal
principal, RequestSecurityToken request, Scope scope) at Microsoft.IdentityModel.SecurityTokenService.SecurityTokenService.Issue(IClaimsPrincipal principal, RequestSecurityToken request) at Microsoft.SharePoint.IdentityModel.SPSecurityTokenService.Issue(IClaimsPrincipal
principal, RequestSecurityToken request) f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.79 w3wp.exe (0x0C48) 0x1318 SharePoint Foundation Monitoring b4ly Medium Leaving Monitored Scope (ExecuteSecurityTokenServiceOperationServer). Execution Time=17.1551132895382 f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.79 w3wp.exe (0x1C74) 0x183C SharePoint Foundation Claims Authentication fsq7 High SPSecurityContext: Request for security token failed with exception: System.ServiceModel.FaultException: The server was
unable to process the request due to an internal error. For more information about the error, either turn on IncludeExceptionDetailInFaults (either from ServiceBehaviorAttribute or from the <serviceDebug> configuration behavior) on the server in
order to send the exception information back to the client, or turn on tracing as per the Microsoft .NET Framework SDK documentation and inspect the server trace logs. at Microsoft.IdentityModel.Protocols.WSTrust.WSTrustChannel.ReadResponse(Message
response) at Microsoft.IdentityModel.Protocols.WSTrust.WSTrustChannel.Issue(RequestSecurityToken rst, RequestSecurityTokenResponse& rstr) at Microsoft.IdentityModel.Protocols.WSTrust.WSTrustChannel.Issue(RequestSecurityToken
rst) at Microsoft.SharePoint.SPSecurityContext.SecurityTokenForContext(Uri context, Boolean bearerToken, SecurityToken onBehalfOf, SecurityToken actAs, SecurityToken delegateTo, SPRequestSecurityTokenProperties properties) f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.79 w3wp.exe (0x1C74) 0x183C SharePoint Foundation Claims Authentication 8306 Critical An exception occurred when trying to issue security token: The server was unable to process the request due to an internal
error. For more information about the error, either turn on IncludeExceptionDetailInFaults (either from ServiceBehaviorAttribute or from the <serviceDebug> configuration behavior) on the server in order to send the exception information back to
the client, or turn on tracing as per the Microsoft .NET Framework SDK documentation and inspect the server trace logs.. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.79 w3wp.exe (0x1C74) 0x183C SharePoint Foundation Monitoring b4ly Medium Leaving Monitored Scope (Application Authentication Pipeline). Execution Time=52.3525336320678 f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.79 w3wp.exe (0x1C74) 0x183C SharePoint Foundation Application Authentication ajezs High SPApplicationAuthenticationModule: Error authenticating request, Error details { Header: {0}, Body: {1} }. Available
parameters: 3001000;reason="There has been an error authenticating the request.";category="invalid_client" {"error_description":"The server was unable to process the request due to an internal error. For more information
about the error, either turn on IncludeExceptionDetailInFaults (either from ServiceBehaviorAttribute or from the <serviceDebug> configuration behavior) on the server in order to send the exception information back to the client, or turn on tracing as
per the Microsoft .NET Framework SDK documentation and inspect the server trace logs."} . f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.79 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 8nca Medium Application error when access /sites/testrpa2/_vti_bin/client.svc, Error=The server was unable to process the request due to an internal
error. For more information about the error, either turn on IncludeExceptionDetailInFaults (either from ServiceBehaviorAttribute or from the <serviceDebug> configuration behavior) on the server in order to send the exception information back to
the client, or turn on tracing as per the Microsoft .NET Framework SDK documentation and inspect the server trace logs. at Microsoft.IdentityModel.Protocols.WSTrust.WSTrustChannel.ReadResponse(Message response) at Microsoft.IdentityModel.Protocols.WSTrust.WSTrustChannel.Issue(RequestSecurityToken
rst, RequestSecurityTokenResponse& rstr) at Microsoft.IdentityModel.Protocols.WSTrust.WSTrustChannel.Issue(RequestSecurityToken rst) at Microsoft.SharePoint.SPSecurityContext.SecurityTokenForContext(Uri context,
Boolean bearerToken, SecurityToken onBehalfOf, SecurityToken actAs, SecurityToken delegateTo, SPRequestSecurityTokenProperties properties) at Microsoft.SharePoint.SPSecurityContext.SecurityTokenForApplicationAuthentication(Uri context,
SecurityToken onBehalfOf) at Microsoft.SharePoint.IdentityModel.SPApplicationAuthenticationModule.<>c__DisplayClass4.<GetLocallyIssuedToken>b__3() at Microsoft.SharePoint.Utilities.SecurityContext.RunAsProcess(CodeToRunElevated
secureCode) at Microsoft.SharePoint.IdentityModel.SPApplicationAuthenticationModule.ConstructIClaimsPrincipalAndSetThreadIdentity(HttpApplication httpApplication, HttpContext httpContext, SPFederationAuthenticationModule fam)
at Microsoft.SharePoint.IdentityModel.SPApplicationAuthenticationModule.AuthenticateRequest(Object sender, EventArgs e) at System.Web.HttpApplication.SyncEventExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
at System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.79 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8b Verbose Looking up context site
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly in the farm SharePoint_Config_QA f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.79 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8d Verbose Looking up the additional information about the typical site
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.80 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8f Verbose Site lookup is replacing
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly with the alternate access url
http://inetdev. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.80 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8g Verbose Looking up typical site
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly in web application SPWebApplication Name=SPDEV - 80. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.80 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8h Verbose Found typical site /sites/testrpa2 (407ba20c-079b-4b99-9e70-f86e6e13ddde) in web application SPWebApplication Name=SPDEV - 80. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.80 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8b Verbose Looking up context site
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly in the farm SharePoint_Config_QA f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.80 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8d Verbose Looking up the additional information about the typical site
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.80 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8f Verbose Site lookup is replacing
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly with the alternate access url
http://inetdev. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.80 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8g Verbose Looking up typical site
http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly in web application SPWebApplication Name=SPDEV - 80. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.80 w3wp.exe (0x1C74) 0x183C SharePoint Foundation General 6t8h Verbose Found typical site /sites/testrpa2 (407ba20c-079b-4b99-9e70-f86e6e13ddde) in web application SPWebApplication Name=SPDEV - 80. f5bd8793-a53c-2127-8485-418c67f110f6
04/16/2015 15:22:03.80 w3wp.exe (0x1C74) 0x183C SharePoint Foundation Monitoring b4ly Medium Leaving Monitored Scope (Request (GET:http://inetdev:80/sites/testrpa2/_vti_bin/client.svc/site/ReadOnly)). Execution Time=62.2890618779761 f5bd8793-a53c-2127-8485-418c67f110f6
Regards
Sakti -
Error: unable to copy to output directory, ReqMgmtActionsVO.xml not found
hi,
While running a page using jdeveloper am getting error like
Error: unable to copy to output directory, ReqMgmtActionsVO.xml not found.
am very thankful to the response
Thanks
SuryaHi,
I faced the same issue.
I fixed it by searching the missing file (In my case MyEO.xml which is a removed file) using JDeveloper (Menu Search/Search Files...).
It found an occurence in the related .jpr file.
In the .jpr, I deleted the related lines:
<Item>
<Key class="java.net.URL" path="xx/oracle/apps/.../MyEO.xml"/>
<Value idref="15"/>
</Item>
That's it.
Regards,
Olivier -
Csv output feature results in a "page not found" error in IE (ver 8)
Has anyone else had issues with the csv output feature returning a "404 page not found" error when using IE version 8.0?
Hello. I'm getting an Http 404 The webpage cannot be found" error when trying to export any APEX application's query results into Excel (Application Express 3.2.1.00.10). This was working fine before. Nothing changed with our APEX application. I've been always using I.E. Version 7.0.5730.11 with no problems. I've reset the I.E. defaults and still the problem exists. I've downloaded Mozilla Firefox and the problem does not happen. However, I would like to know why my I.E. still gets this error? Any feedback or suggestions would greatly be appreciated. Thanks for your time.
-
Edit Page;Report;Enable CSV Output;Apply Changes;Page Not Found;wwv_flow
Hi,
We have a really annoying error in our application, whereby we are unable to save ANY changes to report attributes if Enable CSV Output is Yes.
I have many pages with Enable CSV Output set to Yes, and when run, the pages can indeed be exported to Excel, fine so far.
However, if we do Edit Page, choose Report change Enable CSV Output to No, then apply changes the option is removed ok - BUT if we then set it back to Yes, when we apply changes again we get a Page Not Found error at this address ;
http://sglas-sand.fm.rbsgrp.net:7780/pls/fdm_uat2/wwv_flow.accept
We obviously dont need to keep changing this value, but the above demonstrates that our reports do currently support CSV output, but for some recent reason, trying to save a page where this option has been changed to Yes causes this crash.
We also seem unable to change and save any other attribute when CSV Output is set to Yes. This leaves us in a tricky situation - unable to change our pages unless we are prepared to remove the Export option!
We were wondering if the support of this this option requires any special processing / objects / etc to be availble / running. Any help greatly appreciated.
John Nice
Royal Bank of Scotland - Finance ITHi Scott,
Thanks for the reply. Our errors were like this in the log ;
[Thu Feb 22 14:52:33 2007] [error] [client <private ip removed>] ] [ecid: 1172155953:<private ip removed>] :30306:0:1855,0] mod_plsql: /pls/fdm_uat2/wwv_flow.accept HTTP-404 ORA-06550: line 23, column 3:\nPLS-00306: wrong number or types of arguments in call to 'ACCEPT'\nORA-06550: line 23, column 3:\nPL/SQL: Statement ignored\n
Versions are ;
Database : 10.2.02
HTMLDB : 2.2
Apache : 10g release 2
Regards,
John
Message was edited by:
John @ RBoS -
Input/Output And Method Not Found Problem
Ok so firstly I think I should apologise on two fronts.
Firstly, 'cause this is probably posted in the wrong board but I'm not sure this was suitable for the Swing board just 'cause I've been using Swing? And secondly 'cause the code I'm gonna post is so shoddy I would think this constitutes as flaim-bait. >_>
In my defense this is purely for a little class project to give something to write some documentation on so I'm really not too bothered about the efficiency or ace-mazingness of the end result. I just want it to work.
To the problem at hand.
I'm trying to write a program that asks the user a question and then outputs their answer to a file, from which a tally of answers can later be made for the purpose of displaying "results".
My problem is I've been having problems with the input/output of saving the answers given to the program.
I'm still learning and input/output is probably my weakest subject (other than, y'know, being good at Java). I've had a bash at it in the following code but all it does it overwrite what is in the file with a single answer so no list of results accumulate. I generally don't have an idea what to try for that one so any pointers would be appreciated.
Also, my second problem is, in trying to gather results by tallying what is contained in the file, I've run across a problem with the charAt() method not being found and I'm not sure why. Isn't that method a part of java.lang?
Here's the code thus far:
//libraries
import javax.swing.*;
import javax.swing.border.*;
import javax.swing.text.*;
import javax.swing.event.*;
import java.awt.*;
import java.awt.event.*;
import java.text.*;
import java.io.*;
class CaseStudy {
public static void main(String args[]) {
GUI maininterface = new GUI();
maininterface.setupMenu();
maininterface.display();
class GUI {
//for the actionlisteners
int whatframe = 0;
//creates mainframe and border content panel
JFrame mainframe = new JFrame("Survey Client");
JPanel borderpanel = new JPanel(), bottompanel = new JPanel();
JButton quizbutton = new JButton("Take the quiz"), tallybutton = new JButton("Show Results"), submitbutton = new JButton("Submit Results"), menubutton = new JButton("Return To Menu");
QuizQuestions toppanel = new QuizQuestions();
QuizResults toppanel2 = new QuizResults();
GUI() {
//sets border in borderpanel, this spaces the main content in from the sides of the window
borderpanel.setBorder(BorderFactory.createEmptyBorder(10,10,10,10));
//sets up the frame and panels and adds on borders
mainframe.setDefaultCloseOperation(mainframe.EXIT_ON_CLOSE); // exits java when clicking on close on main frame
mainframe.getContentPane().add(borderpanel); // adds the panel as a component to the frame, the panel can hold stuffs
borderpanel.setLayout(new BoxLayout(borderpanel, BoxLayout.PAGE_AXIS));// page_axis means it'll layout vertically
bottompanel.setLayout(new BoxLayout(bottompanel, BoxLayout.LINE_AXIS));// line_axis means it'll layout horizontally
//gives button an action
quizbutton.addActionListener(new ActionListener() {
public void actionPerformed(ActionEvent e1) {
setupQuiz();
tallybutton.addActionListener(new ActionListener() {
public void actionPerformed(ActionEvent e1) {
if(whatframe == 1) setupResults();
else {
int rusure = JOptionPane.showConfirmDialog(null, "Are you sure you wish to show results? Any current quiz answers won't be saved.", "Please Choose One", JOptionPane.YES_NO_OPTION);
if(rusure == JOptionPane.YES_OPTION) setupResults();
menubutton.addActionListener(new ActionListener() {
public void actionPerformed(ActionEvent e1) {
setupMenu();
submitbutton.addActionListener(new ActionListener() {
public void actionPerformed(ActionEvent e1) {
toppanel.doQuiz();
borderpanel.add(bottompanel);
public void setupMenu() {
if(whatframe == 3) {
bottompanel.remove(menubutton);
borderpanel.remove(toppanel2);
whatframe = 1;
//adds components and lays them out
bottompanel.add(quizbutton);
bottompanel.add(Box.createRigidArea(new Dimension(0,10)));
bottompanel.add(tallybutton);
display();
public void setupQuiz() {
bottompanel.remove(quizbutton);
bottompanel.remove(Box.createRigidArea(new Dimension(0,10)));
bottompanel.remove(tallybutton);
whatframe = 2;
bottompanel.add(submitbutton);
bottompanel.add(Box.createRigidArea(new Dimension(0,10)));
bottompanel.add(tallybutton);
borderpanel.add(toppanel);
display();
public void setupResults() {
if(whatframe == 1) {
bottompanel.remove(quizbutton);
bottompanel.remove(Box.createRigidArea(new Dimension(0,10)));
bottompanel.remove(tallybutton);
else {
bottompanel.remove(submitbutton);
bottompanel.remove(Box.createRigidArea(new Dimension(0,10)));
bottompanel.remove(tallybutton);
borderpanel.remove(toppanel);
whatframe = 3;
bottompanel.add(menubutton);
borderpanel.add(toppanel2);
display();
public void display() {
//sets the size of the frame around it's components and then shows it
mainframe.pack();
mainframe.setVisible(true);
mainframe.validate(); //makes referenced container relayout it's components
class QuizQuestions extends JPanel {
LoadingSaving loadsave = new LoadingSaving();
JPanel popm = new JPanel(), pop1 = new JPanel(), pop2 = new JPanel(), pop3 = new JPanel(), pop4 = new JPanel();
JFormattedTextField ques = new JFormattedTextField(), op1 = new JFormattedTextField(), op2 = new JFormattedTextField(), op3 = new JFormattedTextField(), op4 = new JFormattedTextField();
JButton bop1 = new JButton("1"), bop2 = new JButton("2"), bop3 = new JButton("3"), bop4 = new JButton("4");
char answer;
QuizQuestions() {
popm.setLayout(new BoxLayout(popm, BoxLayout.PAGE_AXIS));
pop1.setLayout(new BoxLayout(pop1, BoxLayout.LINE_AXIS));
pop2.setLayout(new BoxLayout(pop2, BoxLayout.LINE_AXIS));
pop3.setLayout(new BoxLayout(pop3, BoxLayout.LINE_AXIS));
pop4.setLayout(new BoxLayout(pop4, BoxLayout.LINE_AXIS));
this.add(popm);
popm.add(ques);
popm.add(pop1);
popm.add(pop2);
popm.add(pop3);
popm.add(pop4);
pop1.add(op1);
pop1.add(bop1);
pop2.add(op2);
pop2.add(bop2);
pop3.add(op3);
pop3.add(bop3);
pop4.add(op4);
pop4.add(bop4);
//sets up question text fields
ques.setEditable(false);
op1.setEditable(false);
op2.setEditable(false);
op3.setEditable(false);
op4.setEditable(false);
bop1.addActionListener(new ActionListener() {
public void actionPerformed(ActionEvent e1) {
answer = 'a';
bop2.addActionListener(new ActionListener() {
public void actionPerformed(ActionEvent e1) {
answer = 'b';
bop3.addActionListener(new ActionListener() {
public void actionPerformed(ActionEvent e1) {
answer = 'c';
bop4.addActionListener(new ActionListener() {
public void actionPerformed(ActionEvent e1) {
answer = 'd';
Question1();
public void doQuiz() {
loadsave.save(answer);
public void Question1() {
ques.setValue("Who's your favourite X-Men character?");
op1.setValue("Cyclops");
op2.setValue("Xavier");
op3.setValue("Wolverine");
op4.setValue("Rogue");
class QuizResults extends JPanel {
LoadingSaving loadsave = new LoadingSaving();
JPanel popm = new JPanel();
JFormattedTextField op1 = new JFormattedTextField(), op2 = new JFormattedTextField(), op3 = new JFormattedTextField(), op4 = new JFormattedTextField();
int[] answerarray = new int[4];
QuizResults() {
popm.setLayout(new BoxLayout(popm, BoxLayout.PAGE_AXIS));
this.add(popm);
popm.add(op1);
popm.add(op2);
popm.add(op3);
popm.add(op4);
op1.setEditable(false);
op2.setEditable(false);
op3.setEditable(false);
op4.setEditable(false);
answerarray = loadsave.load();
op1.setValue(answerarray[0]);
op2.setValue(answerarray[1]);
op3.setValue(answerarray[2]);
op4.setValue(answerarray[3]);
class LoadingSaving {
public void save(char answer) {
FileReader fr;
FileWriter fw;
BufferedReader br;
String s;
try {
//ERRORERRORERRORERRORERRORERRORERRORERRORERRORERRORERRORERRORERRORERRORERRORERROR
fr = new FileReader("casestudyoutput.txt");
fw = new FileWriter("casestudyoutput.txt");
br = new BufferedReader(fr);
if (br.readLine() == null) s = "x";
else s = br.readLine();
s = s + answer;
fw.write(s);
fr.close();
fw.close();
//ERRORERRORERRORERRORERRORERRORERRORERRORERRORERRORERRORERRORERRORERRORERRORERROR
catch(FileNotFoundException exc) {
JOptionPane.showMessageDialog(null, "File not found.");
return;
catch(IOException exc) {
JOptionPane.showMessageDialog(null, "Something bad happened.");
return;
public int[] load() {
FileReader fr;
BufferedReader br;
int[] answerarray = new int[3];
String s;
long length;
int a = 0, b = 0, c = 0, d = 0;
answerarray[0] = 0;
answerarray[1] = 0;
answerarray[2] = 0;
answerarray[3] = 0;
try {
fr = new FileReader("casestudyoutput.txt");
br = new BufferedReader(fr);
if (br.readLine() == null) return answerarray;
else s = br.readLine();
length = s.length();
for(int i = 0; i < length; i++) {
char ch = charAt(i); //ERRORERRORERRORERRORERRORERRORERRORERRORERRORERRORERRORERRORERRORERRORERRORERROR
switch(ch) {
case 'a':
a++;
break;
case 'b':
b++;
break;
case 'c':
c++;
break;
case 'd':
d++;
break;
answerarray[0] = a;
answerarray[1] = b;
answerarray[2] = c;
answerarray[3] = d;
fr.close();
catch(FileNotFoundException exc) {
JOptionPane.showMessageDialog(null, "File not found.");
return answerarray;
catch(IOException exc) {
JOptionPane.showMessageDialog(null, "Something bad happened.");
return answerarray;
return answerarray;
}Any pointers/tips/solutions/angry posts to tell me to stop trying to learn Java would be greatly appreciated.
Thanks in advance!
Oh, and in trying to work with it a bit further I realised I'm having a few problems with runtime errors due to exceptions. The first was due to the array being assigned out of bounds (fixed in the above code). But the second reads the following:
Exception in thread "main" java.lang.NullPointerException
at Loadingsaving.load(CaseStudy.java:330)
at QuizResults.(init)(CaseStudy.java.259)
at GUI.(init)(CaseStudy.java:34)
at CaseStudy.main(CaseStudy.java:15)Not quite sure what this one means or how to handle it. =\
Edited by: ThePermster on May 19, 2008 8:08 AMA NullPointerException means a method has been called on a null object, or a variable that isn't pointing to any object. Your Exception points to line 330, which is:
length = s.length();A NPE on that line means that s is null. So let's look at where s is set:
if (br.readLine() == null) return answerarray;
else s = br.readLine();s gets it's value from br.readLine(), so that method must be returning null. You have a logical error here. Look at your If-Else. It reads a line, makes sure it isn't null...then it reads another line. Well what if that line is null? You are performing 2 reads here instead of 1.
Since your If condition returns a value, there's no need for an Else. The code will continue on until it reaches another return. Try this:
s = br.readLine();
if (s == null) return answerarray; -
Help needed to resolve-First component in name com.adobe.output.config.OutputConfigHome not found
Have installed Live Cycle ES2.5 SP2 Server (WebSphere) Trial version with Oracle DB.
I want to generate PDF by merging data xml with XDP template. Hence I am trying to remotely invoke Livecycle Output Service (web service) for creating the PDF document using the Java API (as per API Quick Start Code Examples).
But I am getting following exception-
com.adobe.livecycle.output.exception.OutputException:
Context: WINADV93Cell01/clusters/cluster2, name: com.adobe.output.config.OutputConfigHome: First component in
name com.adobe.output.config.OutputConfigHome not found. in javax.naming.NameNotFoundException, cause: IDL:omg.org/CosNaming/NamingContext/NotFound:
1.0 in org.omg.CosNaming.NamingContextPackage.NotFound
at com.adobe.printSubmitter.util.ResultFile.<init>(ResultFile.java:65)
at com.adobe.printSubmitter.PrintServer.submit(PrintServer.java:229)
at com.adobe.printSubmitter.service.OutputServiceImpl.generateOutputInTxn(OutputServiceImpl. java:262)
at com.adobe.printSubmitter.service.OutputServiceImpl.generatePDFOutputInTxn(OutputServiceIm pl.java:395)
at com.adobe.printSubmitter.service.OutputServiceImpl.access$100(OutputServiceImpl.java:82)
at com.adobe.printSubmitter.service.OutputServiceImpl$2.doInTransaction(OutputServiceImpl.ja va:346)
at com.adobe.idp.dsc.transaction.impl.ejb.adapter.EjbTransactionBMTAdapterBean.doRequiresNew (EjbTransactionBMTAdapterBean.java:218)
at com.adobe.idp.dsc.transaction.impl.ejb.adapter.EJSLocalStatelessEjbTransactionBMTAdapter_ 3af08fdf.doRequiresNew(Unknown Source)
at com.adobe.idp.dsc.transaction.impl.ejb.EjbTransactionProvider.execute(EjbTransactionProvi der.java:133)
at com.adobe.idp.dsc.transaction.impl.DefaultTransactionTemplate.execute(DefaultTransactionT emplate.java:79)
at com.adobe.printSubmitter.service.OutputServiceImpl.invokeGeneratePDFOutputWithSMT(OutputS erviceImpl.java:341)
at com.adobe.printSubmitter.service.OutputServiceImpl.generatePDFOutput(OutputServiceImpl.ja va:304)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:45)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:37)
Kindly help me to resolve this error?Form Server has nothing to do with Reader Extensions (you must be running an orchestration that uses a Forms Call then a RE call). Lets validate that each component is installed correctly. Can you open the Reader Extensions UI and apply rights to a file?
Use this URL to get to the UI:
http://servername:portNUmber/ReaderExtensions
Note that you will need the rights to log in .....use administrator for now.
Paul -
Garage band newbie here...Been trying to record using PreSonus as my interface..having nothing but problems when I try to bring up
garageband. Multible restarts did help at first but now I can get no sound and cant seem to load the drivers at all in output/input...any help with this problem?YES!!! YES!!! YES!!!
I got it!!! Yes!!!
Guys, I've solved my problem about that error -10202 (Selected driver not found).
I have installed in my Mac Pro (OS X 10.5.8) a document with an extension ".rsrc" to correct the position of the accents in my keyboard, like acute accent, tilde and circumflex.
That file is called "U.S. - International.rsrc" and it's stored in the following path:
"Macintosh HD/Library/Keyboard Layouts"
So, when it's properly installed, I can choose 2 country flags on the right side of the menu bar (U.S. - International and Brazilian).
That's the clue!
When I pick up "U.S. - International", my keyboard works fine with the accents, >>>BUT<<< Logic Pro 9 doesn't recognize my audio driver; and when I pick up "Brazilian", my keyboard doesn't work with the accents exactly as it shows me on each key, BUT Logic Pro 9 DOES recognize my audio driver.
So, when I want to write anything out, I will pick up the "US - International" and when I want to work on the Logic Pro 9, I will pick up "Brazilian".
I hope I can help all of you.
Regards,
Renato Veiga. -
Hello,
I have a Cisco IPS4255 that will not boot an image. I'm seemingly successfully completing a TFTPDNLD each time, but it keeps rebooting with the cannot find image in \ error.
Here is a detailed snap shot:
/* Style Definitions */
table.MsoNormalTable
{mso-style-name:"Table Normal";
mso-tstyle-rowband-size:0;
mso-tstyle-colband-size:0;
mso-style-noshow:yes;
mso-style-priority:99;
mso-style-qformat:yes;
mso-style-parent:"";
mso-padding-alt:0in 5.4pt 0in 5.4pt;
mso-para-margin-top:0in;
mso-para-margin-right:0in;
mso-para-margin-bottom:10.0pt;
mso-para-margin-left:0in;
line-height:115%;
mso-pagination:widow-orphan;
font-size:11.0pt;
font-family:"Calibri","sans-serif";
mso-ascii-font-family:Calibri;
mso-ascii-theme-font:minor-latin;
mso-fareast-font-family:"Times New Roman";
mso-fareast-theme-font:minor-fareast;
mso-hansi-font-family:Calibri;
mso-hansi-theme-font:minor-latin;
mso-bidi-font-family:"Times New Roman";
mso-bidi-theme-font:minor-bidi;}
#1- I TFTP image to device which automatically starts the output below:
ENABLING IO-APIC IRQs
Setting 14 in the phys_id_present_map
...changing IO-APIC physical APIC ID to 14 ... ok.
Setting 13 in the phys_id_present_map
...changing IO-APIC physical APIC ID to 13 ... ok.
..TIMER: vector=0x31 pin1=2 pin2=0
testing the IO APIC.......................
.................................... done.
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 3000.1599 MHz.
..... host bus clock speed is 200.0105 MHz.
cpu: 0, clocks: 2000105, slice: 1000052
CPU0<T0:2000096,T1:1000032,D:12,S:1000052,C:2000105>
Waiting on wait_init_idle (map = 0x0)
All processors have done init_idle
PCI: PCI BIOS revision 2.10 entry at 0xff648, last bus=4
PCI: Using configuration type 1
PCI: Probing PCI hardware
PCI: Probing PCI hardware (bus 00)
PCI: Ignoring BAR0-3 of IDE controller 00:1f.2
Transparent bridge - Intel Corp. 82801BA/CA/DB/EB PCI Bridge
PCI->APIC IRQ transform: (B0,I29,P0) -> 16
PCI->APIC IRQ transform: (B0,I29,P1) -> 19
PCI->APIC IRQ transform: (B0,I29,P3) -> 23
PCI->APIC IRQ transform: (B0,I31,P0) -> 16
PCI->APIC IRQ transform: (B0,I31,P1) -> 17
PCI->APIC IRQ transform: (B0,I31,P1) -> 17
PCI->APIC IRQ transform: (B2,I1,P0) -> 18
PCI->APIC IRQ transform: (B3,I1,P0) -> 24
PCI->APIC IRQ transform: (B3,I2,P0) -> 24
PCI->APIC IRQ transform: (B3,I2,P1) -> 25
PCI->APIC IRQ transform: (B3,I3,P0) -> 26
PCI->APIC IRQ transform: (B3,I3,P1) -> 27
PCI->APIC IRQ transform: (B4,I2,P0) -> 16
PCI->APIC IRQ transform: (B4,I3,P0) -> 17
PCI: Cannot allocate resource region 0 of device 00:00.0
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Linux NET4.0 for Linux 2.4
Based upon Swansea University Computer Society NET3.039
Initializing RT netlink socket
Starting kswapd
allocated 32 pages and 32 bhs reserved for the highmem bounces
Journalled Block Device driver loaded
keyboard: controller not found
pty: 2048 Unix98 ptys configured
Serial driver version 5.05c (2001-07-08) with MANY_PORTS MULTIPORT SHARE_IRQ SER
IAL_PCI ISAPNP enabled
ttyS00 at 0x03f8 (irq = 4) is a 16550A
ttyS01 at 0x02f8 (irq = 3) is a 16550A
Real Time Clock Driver v1.10f
RAMDISK driver initialized: 16 RAM disks of 30720K size 1024 blocksize
loop: loaded (max 8 devices)
lpc: version 0.1 (Mar 4 2005)
Uniform Multi-Platform E-IDE driver Revision: 7.00beta4-2.4
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
hda: TOQHIBA THLCD512MBA, CFA DISK drive
hdb: QalDisi QDAF@-510, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: attached ide-disk driver.
hda: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error }
hda: task_no_data_intr: error=0x04 { DriveStatusError }
hda: 484848 sectors (248 MB) w/2KiB Cache, CHS=481/16/63
hdb: attached ide-disk driver.
hdb: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error }
hdb: task_no_data_intr: error=0x04 { DriveStatusError }
hdb: 484848 sectors (248 MB) w/1KiB Cache, CHS=481/16/63
Partition check:
hda: hda1 hda2 hda3 hda4
hdb: hdb1 hdb2 hdb3 hdb4
ide: late registration of driver.
SCSI subsystem driver Revision: 1.00
i2c-core.o: i2c core module version 2.8.7 (20040611)
i2c-dev.o: i2c /dev entries driver module version 2.8.7 (20040611)
i2c-proc.o version 2.8.7 (20040611)
i2c-i801 version 2.8.7 (20040611)
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP, IGMP
IP: routing cache hash table of 32768 buckets, 256Kbytes
TCP: Hash tables configured (established 262144 bind 65536)
Linux IP multicast router 0.06 plus PIM-SM
NET4: Unix domain sockets 1.0/SMP for Linux NET4.0.
RAMDISK: Compressed image found at block 0
Freeing initrd memory: 26522k freed
VFS: Mounted root (ext2 filesystem) readonly.
Freeing unused kernel memory: 136k freed
init started: EXT2-fs warning: checktime reached, running e2fsck is recommended
BusyBox v1.00-rc1 (2005.03.04-09:39+0000) multi-call binary
init started: BusyBox v1.00-rc1 (2005.03.04-09:39+0000) multi-call binary
Starting pid 10, console /dev/ttyS0: '/etc/init.d/rcS'
Recovery version 1.13
Started on Sun Mar 7 05:17:41 UTC 2010
Full system recovery
A
Please press Enter to activate this console.
tarting pid 86, console /dev/ttyS0: '/bin/sh'
BusyBox v1.00-rc1 (2005.03.04-09:39+0000) Built-in shell (ash)
Enter 'help' for a list of built-in commands.
#2- I’m not a unix/linux person so I don’t have the knowledge to fix the “hdx” errors above, so after reboot it goes to “rommon”
Booting system, please wait...
CISCO SYSTEMS
Embedded BIOS Version 1.0(10)0 03/25/05 22:42:05.25
Low Memory: 631 KB
High Memory: 3968 MB
PCI Device Table.
Bus Dev Func VendID DevID Class Irq
00 00 00 8086 2578 Host Bridge
00 01 00 8086 2579 PCI-to-PCI Bridge
00 03 00 8086 257B PCI-to-PCI Bridge
00 1C 00 8086 25AE PCI-to-PCI Bridge
00 1D 00 8086 25A9 Serial Bus 11
00 1D 01 8086 25AA Serial Bus 10
00 1D 04 8086 25AB System
00 1D 05 8086 25AC IRQ Controller
00 1D 07 8086 25AD Serial Bus 9
00 1E 00 8086 244E PCI-to-PCI Bridge
00 1F 00 8086 25A1 ISA Bridge
00 1F 02 8086 25A3 IDE Controller 11
00 1F 03 8086 25A4 Serial Bus 5
00 1F 05 8086 25A6 Audio 5
02 01 00 8086 1075 Ethernet 11
03 01 00 177D 0003 Encrypt/Decrypt 9
03 02 00 8086 1079 Ethernet 9
03 02 01 8086 1079 Ethernet 9
03 03 00 8086 1079 Ethernet 9
03 03 01 8086 1079 Ethernet 9
04 02 00 8086 1209 Ethernet 11
04 03 00 8086 1209 Ethernet 5
Evaluating BIOS Options ...
Launch BIOS Extension to setup ROMMON
Cisco Systems ROMMON Version (1.0(10)0) #0: Fri Mar 25 23:02:10 PST 2005
Platform IPS-4255-K9
Management0/0
Link is UP
MAC Address: 000f.f775.7e24
Use ? for help.
rommon #0>
#3- If the TFTP is rerun the entire cycle starts again.The IPS 4255 sensor appliance has only a single 512 MB internal CompactFlash module for storage by-default, so this part of the output you posted is interesting:
hda: TOQHIBA THLCD512MBA, CFA DISK drive
hdb: QalDisi QDAF@-510, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hda: attached ide-disk driver.
hda: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error }
hda: task_no_data_intr: error=0x04 { DriveStatusError }
hda: 484848 sectors (248 MB) w/2KiB Cache, CHS=481/16/63
hdb: attached ide-disk driver.
hdb: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error }
hdb: task_no_data_intr: error=0x04 { DriveStatusError }
hdb: 484848 sectors (248 MB) w/1KiB Cache, CHS=481/16/63
As it appears that two (2) 256 MB ("248 MB") storage devices are being detected (despite the model of the first even containing "512MB" in its name).
I'd recommend double-checking that there is nothing installed in the "External compact flash device" slot located on the back of the appliance. See here for reference: http://www.cisco.com/en/US/docs/security/ips/7.0/installation/guide/hw_installing_4240_4255.html#wp2726
If there is a CompactFlash module installed there, eject and remove it, then power-cycle the appliance and attempt the re-image ("recovery") process once more. If the boot output still contains the same errors for hda and hdb, then it is probably a failing/failed CompactFlash module, so an RMA will likely be necessary to resolve. -
"Class Circle not found in TryBouncingBalls" error message. Help !
Dear People,
I have an error message :
"TryBouncingBalls.java": Error : class Circle not found in class stan_bluej_ch5_p135.TryBouncingBalls at line 67, "
Circle circle = new Circle(xPos + 130, 30);
below are the classes TryBouncingBalls, BouncingBall, BallDemo, Canvas
Thank you in advance
Stan
package stan_bluej_ch5_p135;
import java.awt.*;
import java.awt.geom.*;
public class TryBouncingBalls
public static void main(String[] args)
Canvas myCanvas = new Canvas("Creativity at its best");
myCanvas.setVisible(true);
BouncingBall ball = new BouncingBall(50,50,16, Color.red, 500, myCanvas);
BouncingBall ball2 = new BouncingBall(70,80,20, Color.green, 500, myCanvas);
BouncingBall ball3 = new BouncingBall(90,100,16, Color.red, 500, myCanvas);
BouncingBall ball4 = new BouncingBall(30,30,20, Color.green, 500, myCanvas);
ball.draw();
ball2.draw();
ball.draw();
ball2.draw();
// make them bounce
boolean finished = false;
while(!finished) {
myCanvas.wait(50); // small delay
ball.move();
ball2.move();
ball3.move();
ball4.move();
// stop once ball has travelled a certain distance on x axis
if(ball.getXPosition() >= 550 && ball2.getXPosition() >= 550)
finished = true;
myCanvas.setFont(new Font("helvetica", Font.BOLD, 14));
myCanvas.setForegroundColor(Color.red);
myCanvas.drawString("We are having fun, ...\n\n", 20, 30);
myCanvas.wait(1000);
myCanvas.setForegroundColor(Color.black);
myCanvas.drawString("...drawing lines...", 60, 60);
myCanvas.wait(500);
myCanvas.setForegroundColor(Color.gray);
myCanvas.drawLine(200, 20, 300, 50);
myCanvas.wait(500);
myCanvas.setForegroundColor(Color.blue);
myCanvas.drawLine(220, 100, 370, 40);
myCanvas.wait(500);
myCanvas.setForegroundColor(Color.green);
myCanvas.drawLine(290, 10, 320, 120);
myCanvas.wait(1000);
myCanvas.setForegroundColor(Color.gray);
myCanvas.drawString("...and shapes!", 110, 90);
myCanvas.setForegroundColor(Color.red);
myCanvas.drawString("to bring to focus creative ideas !", 310, 290);
// the shape to draw and move
int xPos = 10;
Rectangle rect = new Rectangle(xPos + 40, 150, 30, 20);
Rectangle rect2 = new Rectangle(xPos + 80, 120, 50, 25);
Rectangle rect3 = new Rectangle(xPos+ 1200, 180, 30, 30);
Rectangle rect4 = new Rectangle(xPos + 150, 220, 40, 15);
myCanvas.fill(rect);
myCanvas.fill(rect2);
myCanvas.fill(rect3);
myCanvas.fill(rect4);
Circle circle = new Circle(xPos + 130, 30);
// Circle circle2 = new Circle(xPos + 150, 50);
// Circle circle3 = new Circle(xPos + 170, 30);
// Circle circle4 = new Circle(xPos + 200, 40);
// myCanvas.fill(circle);
// myCanvas.fill(circle2);
// myCanvas.fill(circle3);
// myCanvas.fill(circle4);
// move the rectangle and circles across the screen
for(int i = 0; i < 200; i ++) {
myCanvas.fill(rect);
myCanvas.fill(rect2);
myCanvas.fill(rect3);
myCanvas.fill(rect4);
myCanvas.wait(10);
myCanvas.erase(rect);
myCanvas.erase(rect2);
myCanvas.erase(rect3);
myCanvas.erase(rect4);
xPos++;
rect.setLocation(xPos, 150);
rect2.setLocation(xPos, 120);
rect3.setLocation(xPos, 180);
rect4.setLocation(xPos, 220);
// at the end of the move, draw once more so that it remains visible
myCanvas.fill(rect);
myCanvas.fill(rect2);
myCanvas.fill(rect3);
myCanvas.fill(rect4);
package stan_bluej_ch5_p135;
import java.awt.*;
import java.awt.geom.*;
* Class BouncingBall - a graphical ball that observes the effect of gravity. The ball
* has the ability to move. Details of movement are determined by the ball itself. It
* will fall downwards, accelerating with time due to the effect of gravity, and bounce
* upward again when hitting the ground.
* This movement can be initiated by repeated calls to the "move" method.
* @author Bruce Quig
* @author Michael Kolling (mik)
* @author David J. Barnes
* @version 1.1 (23-Jan-2002)
public class BouncingBall
private static final int gravity = 3; // effect of gravity
private int ballDegradation = 2;
private Ellipse2D.Double circle;
private Color color;
private int diameter;
private int xPosition;
private int yPosition;
private final int groundPosition; // y position of ground
private Canvas canvas;
private int ySpeed = 1; // initial downward speed
* Constructor for objects of class BouncingBall
* @param xPos the horizontal coordinate of the ball
* @param yPos the vertical coordinate of the ball
* @param ballDiameter the diameter (in pixels) of the ball
* @param ballColor the color of the ball
* @param groundPos the position of the ground (where the wall will bounce)
* @param drawingCanvas the canvas to draw this ball on
public BouncingBall(int xPos, int yPos, int ballDiameter, Color ballColor,
int groundPos, Canvas drawingCanvas)
xPosition = xPos;
yPosition = yPos;
color = ballColor;
diameter = ballDiameter;
groundPosition = groundPos;
canvas = drawingCanvas;
* Draw this ball at its current position onto the canvas.
public void draw()
canvas.setForegroundColor(color);
canvas.fillCircle(xPosition, yPosition, diameter);
* Erase this ball at its current position.
public void erase()
canvas.eraseCircle(xPosition, yPosition, diameter);
* Move this ball according to its position and speed and redraw.
public void move()
// remove from canvas at the current position
erase();
// compute new position
ySpeed += gravity;
yPosition += ySpeed;
xPosition +=2;
// check if it has hit the ground
if(yPosition >= (groundPosition - diameter) && ySpeed > 0) {
yPosition = (int)(groundPosition - diameter);
ySpeed = -ySpeed + ballDegradation;
// draw again at new position
draw();
* return the horizontal position of this ball
public int getXPosition()
return xPosition;
* return the vertical position of this ball
public int getYPosition()
return yPosition;
package stan_bluej_ch5_p135;
import java.awt.*;
import java.awt.geom.*;
* Class BallDemo - provides two short demonstrations showing how to use the
* Canvas class.
* @author Michael Kolling and David J. Barnes
* @version 1.0 (23-Jan-2002)
public class BallDemo
private Canvas myCanvas;
* Create a BallDemo object. Creates a fresh canvas and makes it visible.
public BallDemo()
myCanvas = new Canvas("Ball Demo", 600, 500);
myCanvas.setVisible(true);
* This method demonstrates some of the drawing operations that are
* available on a Canvas object.
public void drawDemo()
myCanvas.setFont(new Font("helvetica", Font.BOLD, 14));
myCanvas.setForegroundColor(Color.red);
myCanvas.drawString("We can draw text, ...", 20, 30);
myCanvas.wait(1000);
myCanvas.setForegroundColor(Color.black);
myCanvas.drawString("...draw lines...", 60, 60);
myCanvas.wait(500);
myCanvas.setForegroundColor(Color.gray);
myCanvas.drawLine(200, 20, 300, 50);
myCanvas.wait(500);
myCanvas.setForegroundColor(Color.blue);
myCanvas.drawLine(220, 100, 370, 40);
myCanvas.wait(500);
myCanvas.setForegroundColor(Color.green);
myCanvas.drawLine(290, 10, 320, 120);
myCanvas.wait(1000);
myCanvas.setForegroundColor(Color.gray);
myCanvas.drawString("...and shapes!", 110, 90);
myCanvas.setForegroundColor(Color.red);
// the shape to draw and move
int xPos = 10;
Rectangle rect = new Rectangle(xPos, 150, 30, 20);
// move the rectangle across the screen
for(int i = 0; i < 200; i ++) {
myCanvas.fill(rect);
myCanvas.wait(10);
myCanvas.erase(rect);
xPos++;
rect.setLocation(xPos, 150);
// at the end of the move, draw once more so that it remains visible
myCanvas.fill(rect);
* Simulates two bouncing balls
public void bounce()
int ground = 400; // position of the ground line
myCanvas.setVisible(true);
// draw the ground
myCanvas.drawLine(50, ground, 550, ground);
// crate and show the balls
BouncingBall ball = new BouncingBall(50, 50, 16, Color.blue, ground, myCanvas);
ball.draw();
BouncingBall ball2 = new BouncingBall(70, 80, 20, Color.red, ground, myCanvas);
ball2.draw();
// make them bounce
boolean finished = false;
while(!finished) {
myCanvas.wait(50); // small delay
ball.move();
ball2.move();
// stop once ball has travelled a certain distance on x axis
if(ball.getXPosition() >= 550 && ball2.getXPosition() >= 550)
finished = true;
ball.erase();
ball2.erase();
package stan_bluej_ch5_p135;
import javax.swing.*;
import java.awt.*;
import java.awt.geom.*;
* Class Canvas - a class to allow for simple graphical
* drawing on a canvas.
* @author Michael Kolling (mik)
* @author Bruce Quig
* @version 1.8 (23.01.2002)
public class Canvas
private JFrame frame;
private CanvasPane canvas;
private Graphics2D graphic;
private Color backgroundColor;
private Image canvasImage;
* Create a Canvas with default height, width and background color
* (300, 300, white).
* @param title title to appear in Canvas Frame
public Canvas(String title)
this(title, 600, 600, Color.white);
* Create a Canvas with default background color (white).
* @param title title to appear in Canvas Frame
* @param width the desired width for the canvas
* @param height the desired height for the canvas
public Canvas(String title, int width, int height)
this(title, width, height, Color.white);
* Create a Canvas.
* @param title title to appear in Canvas Frame
* @param width the desired width for the canvas
* @param height the desired height for the canvas
* @param bgClour the desired background color of the canvas
public Canvas(String title, int width, int height, Color bgColor)
frame = new JFrame();
canvas = new CanvasPane();
frame.setContentPane(canvas);
frame.setTitle(title);
canvas.setPreferredSize(new Dimension(width, height));
backgroundColor = bgColor;
frame.pack();
* Set the canvas visibility and brings canvas to the front of screen
* when made visible. This method can also be used to bring an already
* visible canvas to the front of other windows.
* @param visible boolean value representing the desired visibility of
* the canvas (true or false)
public void setVisible(boolean visible)
if(graphic == null) {
// first time: instantiate the offscreen image and fill it with
// the background color
Dimension size = canvas.getSize();
canvasImage = canvas.createImage(size.width, size.height);
graphic = (Graphics2D)canvasImage.getGraphics();
graphic.setColor(backgroundColor);
graphic.fillRect(0, 0, size.width, size.height);
graphic.setColor(Color.black);
frame.show();
* Provide information on visibility of the Canvas.
* @return true if canvas is visible, false otherwise
public boolean isVisible()
return frame.isVisible();
* Draw the outline of a given shape onto the canvas.
* @param shape the shape object to be drawn on the canvas
public void draw(Shape shape)
graphic.draw(shape);
canvas.repaint();
* Fill the internal dimensions of a given shape with the current
* foreground color of the canvas.
* @param shape the shape object to be filled
public void fill(Shape shape)
graphic.fill(shape);
canvas.repaint();
* Fill the internal dimensions of the given circle with the current
* foreground color of the canvas.
public void fillCircle(int xPos, int yPos, int diameter)
Ellipse2D.Double circle = new Ellipse2D.Double(xPos, yPos, diameter, diameter);
fill(circle);
* Fill the internal dimensions of the given rectangle with the current
* foreground color of the canvas. This is a convenience method. A similar
* effect can be achieved with the "fill" method.
public void fillRectangle(int xPos, int yPos, int width, int height)
fill(new Rectangle(xPos, yPos, width, height));
* Erase the whole canvas.
public void erase()
Color original = graphic.getColor();
graphic.setColor(backgroundColor);
Dimension size = canvas.getSize();
graphic.fill(new Rectangle(0, 0, size.width, size.height));
graphic.setColor(original);
canvas.repaint();
* Erase the internal dimensions of the given circle. This is a
* convenience method. A similar effect can be achieved with
* the "erase" method.
public void eraseCircle(int xPos, int yPos, int diameter)
Ellipse2D.Double circle = new Ellipse2D.Double(xPos, yPos, diameter, diameter);
erase(circle);
* Erase the internal dimensions of the given rectangle. This is a
* convenience method. A similar effect can be achieved with
* the "erase" method.
public void eraseRectangle(int xPos, int yPos, int width, int height)
erase(new Rectangle(xPos, yPos, width, height));
* Erase a given shape's interior on the screen.
* @param shape the shape object to be erased
public void erase(Shape shape)
Color original = graphic.getColor();
graphic.setColor(backgroundColor);
graphic.fill(shape); // erase by filling background color
graphic.setColor(original);
canvas.repaint();
* Erases a given shape's outline on the screen.
* @param shape the shape object to be erased
public void eraseOutline(Shape shape)
Color original = graphic.getColor();
graphic.setColor(backgroundColor);
graphic.draw(shape); // erase by drawing background color
graphic.setColor(original);
canvas.repaint();
* Draws an image onto the canvas.
* @param image the Image object to be displayed
* @param x x co-ordinate for Image placement
* @param y y co-ordinate for Image placement
* @return returns boolean value representing whether the image was
* completely loaded
public boolean drawImage(Image image, int x, int y)
boolean result = graphic.drawImage(image, x, y, null);
canvas.repaint();
return result;
* Draws a String on the Canvas.
* @param text the String to be displayed
* @param x x co-ordinate for text placement
* @param y y co-ordinate for text placement
public void drawString(String text, int x, int y)
graphic.drawString(text, x, y);
canvas.repaint();
* Erases a String on the Canvas.
* @param text the String to be displayed
* @param x x co-ordinate for text placement
* @param y y co-ordinate for text placement
public void eraseString(String text, int x, int y)
Color original = graphic.getColor();
graphic.setColor(backgroundColor);
graphic.drawString(text, x, y);
graphic.setColor(original);
canvas.repaint();
* Draws a line on the Canvas.
* @param x1 x co-ordinate of start of line
* @param y1 y co-ordinate of start of line
* @param x2 x co-ordinate of end of line
* @param y2 y co-ordinate of end of line
public void drawLine(int x1, int y1, int x2, int y2)
graphic.drawLine(x1, y1, x2, y2);
canvas.repaint();
* Sets the foreground color of the Canvas.
* @param newColor the new color for the foreground of the Canvas
public void setForegroundColor(Color blue)
graphic.setColor(Color.blue);
* Returns the current color of the foreground.
* @return the color of the foreground of the Canvas
public Color getForegroundColor()
return graphic.getColor();
* Sets the background color of the Canvas.
* @param newColor the new color for the background of the Canvas
public void setBackgroundColor(Color newColor)
backgroundColor = newColor;
graphic.setBackground(newColor);
* Returns the current color of the background
* @return the color of the background of the Canvas
public Color getBackgroundColor()
return backgroundColor;
* changes the current Font used on the Canvas
* @param newFont new font to be used for String output
public void setFont(Font newFont)
graphic.setFont(newFont);
* Returns the current font of the canvas.
* @return the font currently in use
public Font getFont()
return graphic.getFont();
* Sets the size of the canvas.
* @param width new width
* @param height new height
public void setSize(int width, int height)
canvas.setPreferredSize(new Dimension(width, height));
Image oldImage = canvasImage;
canvasImage = canvas.createImage(width, height);
graphic = (Graphics2D)canvasImage.getGraphics();
graphic.drawImage(oldImage, 0, 0, null);
frame.pack();
* Returns the size of the canvas.
* @return The current dimension of the canvas
public Dimension getSize()
return canvas.getSize();
* Waits for a specified number of milliseconds before finishing.
* This provides an easy way to specify a small delay which can be
* used when producing animations.
* @param milliseconds the number
public void wait(int milliseconds)
try
Thread.sleep(milliseconds);
catch (InterruptedException e)
// ignoring exception at the moment
* Nested class CanvasPane - the actual canvas component contained in the
* Canvas frame. This is essentially a JPanel with added capability to
* refresh the image drawn on it.
private class CanvasPane extends JPanel
public void paint(Graphics g)
g.drawImage(canvasImage, 0, 0, null);Dear Miciuli,
I found the definition for the circle in the canvas class and used it to creates circles ! Thank you for jaring my brain into thinking !
Stan
Ellipse2D.Double circle = new Ellipse2D.Double(xPos, 70, 30 , 30); -
APEX Listener 2.0 - RESTful Services Failure with 404 - Not Found
Versions used:
* APEX Listener 2.0.0.354.17.05
* Application Express 4.2.1.00.08
* Oracle Database 11.2.0.1
When testing the sample RESTful Service Module oracle.example.hr I always get 404 - Not Found page.
I followed the documentation to install and configure APEX 4.2 and the Listener 2.0. Everything in my APEX installation works fine except RESTful Services.
For example, when calling this RESTful Service:
http://company.com:45678/apex/DEV/xxuapex/hr/empinfo/
I get a 404 page.
The corresponding entry in url-mapping.xml is:
<pool base-path="/DEV" name="od01" workspace-id="xxuapex"/>
where xxuapex is the name of the schema as well as the workspace where the RESTful Service is installed.
Moreover, the corresponding od01.xml, od01_rt.xml and od01_al.xml in the conf directory seem correct.
Any help is greatly appreciated.
Thanks.
Eddie Awad.Hi Eddie,
+> try the other option base-url of the url-mapping+
I did. No change. Still getting 404.When active it should transform the 404 page into a detailed 404 with a description of what the error is. Just to be sure, this is activated in the defaults.xml file of the APEX Listener as: *<entry key="log.logging">true</entry>*.
You should then see a detailed 404 output in your browser of what's going wrong first of all.
+> Could you post your url-mapping.xml file?+
<?xml version="1.0" encoding="UTF-8"?>
<pool-config xmlns="http://xmlns.oracle.com/apex/pool-config">
<pool base-path="/DEV" name="od01" workspace-id="xxuapex"/>
<pool base-path="/TEST" name="ot01" workspace-id="xxuapex"/>
</pool-config>
Despite using the url mapping script, it didn't map mine correctly and had to edit it manually. It was the use of "apex" that got it to work for me:
*<pool base-path="/" name="apex" workspace-id="workspace-name-here" updated="2013-01-09T20:48:59.75Z"/>*
Nick. -
I am working with VB6 on an application involving a PCI-6711 Analog output card. I now am in the phase of working on the install file. I have developed this application on an XP machine, and i am trying to install it on a Windows 2000 machine, but i get a "nidaq32.dll file not found" error when i try to run my program on the 2000 machine. I have looked in the System32 folder and nidaq32.dll is in fact in the folder. I am wondering if my install file (created using INNO installer) didn't register the file correctly, of if it has to do with the driver i am using on the PC. I have NIDAQ 6.9.3 installed on the 2000 machine and NIDAQ 7.2 installed on my XP machine.
Any help would be appreciated.
Thanks,
GerryHello GVanhorn,
The problem seems to be that you have different drivers in the systems. You might want to use the same version of the driver in both machine since that will install the same version of the nidaq32.dll. -
Really at a loss on this., both apexins and apxldimg give 'file not found'
I am sure the correct parameter is being supplied. This is on windows 7 64 bit platform.
SQL> @apxldimg C:
PL/SQL procedure successfully completed.
old 1: create directory APEX_IMAGES as '&1\apex\images'
new 1: create directory APEX_IMAGES as 'C:\apex\images'
Directory created.
file not found: /doc/aadm_chng_day.htm
file not found: /doc/adm_email.htm
file not found: /doc/adm_request_notif.htm
file not found: /doc/advnc_web_invoke.htm
file not found: /doc/api007.htm
file not found: /doc/bldapp_appgroup.htm
file not found: /doc/bldapp_srch_item.htm
file not found: /doc/bldapp_wiz_pg_def.htm
file not found: /doc/deploy_app_id.htm
file not found: /iu_option.gif
file not found: /oracle.gif
file not found: /reg_temp_edit.gif
PL/SQL procedure successfully completed.
PL/SQL procedure successfully completed.
Commit complete.
timing for: Load Images
Elapsed: 00:00:22.38
Directory dropped.
SQL> spool off
Any help is most appreciated.apex 3.1 on oracle 11.2...
Increased session_max_open_files and re-ran receiving below output.. i do get proper images displayed on login page now;however, not sure everything is still 100% correct.
SQL> @apxldimg_mod G:\oracleSoftware
PL/SQL procedure successfully completed.
old 1: create directory APEX_IMAGES as '&1\apex\images'
new 1: create directory APEX_IMAGES as 'G:\oracleSoftware\apex\images'
Directory created.
-21560 ORA-21560: argument 3 is null, invalid, or out of range
-21560 ORA-21560: argument 3 is null, invalid, or out of range
-21560 ORA-21560: argument 3 is null, invalid, or out of range
-21560 ORA-21560: argument 3 is null, invalid, or out of range
-21560 ORA-21560: argument 3 is null, invalid, or out of range
-21560 ORA-21560: argument 3 is null, invalid, or out of range
-21560 ORA-21560: argument 3 is null, invalid, or out of range
-21560 ORA-21560: argument 3 is null, invalid, or out of range
-21560 ORA-21560: argument 3 is null, invalid, or out of range
-21560 ORA-21560: argument 3 is null, invalid, or out of range
-21560 ORA-21560: argument 3 is null, invalid, or out of range
-21560 ORA-21560: argument 3 is null, invalid, or out of range
-21560 ORA-21560: argument 3 is null, invalid, or out of range
-21560 ORA-21560: argument 3 is null, invalid, or out of range
-21560 ORA-21560: argument 3 is null, invalid, or out of range
PL/SQL procedure successfully completed.
PL/SQL procedure successfully completed.
Commit complete.
timing for: Load Images
Elapsed: 00:00:46.97
Directory dropped.
SQL> -
"Field Catalog not found" ...problem in ALV reporting !!
Hi,
When i execute my report program where in I generate a Selection screen, I am able to select the values in the selection screen. Once I click on the execute button I get the message
"Field Catalog not found"...
The elabore message is
"Field Catalog cannot be determined becaus the output table structure name was not specified"
Where am I wrong ??
Find below my code ...
*& Report Z_MIGO_TXJCD_REPORT
REPORT Z_MIGO_TXJCD_REPORT.
TYPE-POOLS: slis.
TABLES: makt,mseg,zmigo_extend,ttxj,mkpf.
DATA: BEGIN OF migo_data OCCURS 0,
matnr LIKE mseg-matnr,
werks LIKE mseg-werks,
lgpla LIKE mseg-lgpla,
bwart LIKE mseg-bwart,
menge LIKE mseg-menge,
dmbtr LIKE mseg-dmbtr,
budat LIKE mkpf-budat,
txjcd LIKE zmigo_extend-txjcd,
END OF migo_data.
DATA: it_cat TYPE slis_t_fieldcat_alv,
wa_lay TYPE slis_layout_alv.
FIELD-SYMBOLS: <fs_cat> LIKE LINE OF it_cat.
SELECT-OPTIONS: so_matnr FOR makt-matnr,
so_budat FOR mkpf-budat,
so_werks FOR mseg-werks,
so_lgpla FOR mseg-lgpla,
so_bwart FOR mseg-bwart,
so_txjcd FOR ttxj-txjcd.
START-OF-SELECTION.
SELECT amatnr awerks algpla abwart
amenge admbtr bbudat ctxjcd INTO TABLE
migo_data
FROM mseg AS a INNER JOIN mkpf AS b ON amblnr = bmblnr INNER JOIN
zmigo_extend AS c ON amblnr = cmblnr
WHERE a~matnr IN so_matnr
AND b~budat IN so_budat
AND a~werks IN so_werks
AND a~lgpla IN so_lgpla
AND a~bwart IN so_bwart
AND c~txjcd IN so_txjcd.
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
i_program_name = sy-cprog
i_internal_tabname = 'migo_data'
i_inclname = sy-cprog
CHANGING
ct_fieldcat = it_cat
EXCEPTIONS
inconsistent_interface = 1
program_error = 2
OTHERS = 3.
LOOP AT it_cat ASSIGNING <fs_cat>.
CLEAR <fs_cat>-key.
ENDLOOP.
wa_lay-zebra = 'X'.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_grid_title = 'MIGO report with Tax Jurisdiction Code'
is_layout = wa_lay
it_fieldcat = it_cat
TABLES
t_outtab = migo_data
EXCEPTIONS
program_error = 1
OTHERS = 2.Give 'migo_data' in uppercase as ''MIGO_DATA'.
Maybe you are looking for
-
Using SQL Server 2008 R2: I have a star schema with a fact table containing the following: ID BIGINT IDENTITY, FK_Dimension1 BIGINT, FK_Dimension2 BIGINT, dataValue NUMERIC(20, 8), classification NVARCHAR(20) The classification defines the security c
-
Software problem with 30 gig video ipod and itunes 7?
ok ever since ive had my ipod it works nice now. since ive moved over to itunes 7 its messed up the first time, it didnt even update the software all the way and i had to restore it manually cuz i had 2 softwares on my iod. also when i ejected and pl
-
When I go "system preferences" "sound" There is no option to activate the internal speakers. How do I restore it?
-
Bug w/ 2009.8 x86_64 image or my DVDr?
I just replaced a burnt-out DVDr w/ a new one (Sony Optiarc AD-7240S-0B) and am finding that my Arch 2009.8 x86_64 disc doesn't boot promptly as it did before. I have burnt several discs from the iso at different speeds and they all act the same. P
-
Regarding custom objects in SPDD
Hi Experts, I am working for an upgrade project from 4.6C to ECC 6.0. I need some clarifications regarding use of SPDD. 1. Will the SPDD list only the standard objects or will it display the custom objects also? 2. If SPDD is not going to display the