Output types are not getting displayed in Outbound Delivery in Display mode

Hello,
The actual requirement is that output types should get attched to the outbound delivery when we do GI(Good Issue) on the outbound delivery.
So, I have created an outbound delivery and did GI on it through IDoc. But, I can not see output types on the delivery (To see output types, go to Extra -> Output -> Header in VL03N) in the display mode. However, I can see in change mode (VL02N).
Could you please suggest the solution for this?

Hi sreeram,
go to crm -> transactions -> basic settings -> define transaction types
copy default email cx03 and create new zemail.
assign that zemail to bus2000126 business activity.select the business activity and click on customizing header.assign the category email. click on channel. maintain the channels 1)GUI crm webclient UI, 2)ICW Interaction center webclient.
save the changes.
go to crm -> transactions -> basic settings -> settings for activities -> maintain categories, goals, priorities -> click on assign categories to transaction types.
assign the category email(which you have assigned above) to the transaction type zemail.
even check maintain categories as well
click on maintain categories -> check 401 email assigned to class G email.
Regards
Krishna

Similar Messages

  • Transaction types are not getting displayed in WUI CRM7.0

    Hello Gurus
    After upgrading the CRM system from 4.0 to 7.0 we are not able to see the trasaction types for the activity mangment in WUI....i have also assigned the transaction types to the channel CEM  Webclient UI
    Suggest how to over come this ...
    Regards
    Sree

    Hi sreeram,
    go to crm -> transactions -> basic settings -> define transaction types
    copy default email cx03 and create new zemail.
    assign that zemail to bus2000126 business activity.select the business activity and click on customizing header.assign the category email. click on channel. maintain the channels 1)GUI crm webclient UI, 2)ICW Interaction center webclient.
    save the changes.
    go to crm -> transactions -> basic settings -> settings for activities -> maintain categories, goals, priorities -> click on assign categories to transaction types.
    assign the category email(which you have assigned above) to the transaction type zemail.
    even check maintain categories as well
    click on maintain categories -> check 401 email assigned to class G email.
    Regards
    Krishna

  • Output type is not getting triggered for ship to party in shippment output

    Hi,
    we have maintained output determination procedure for shipments. It was working fine.
    We have just added new condition table to access sequence, and maintained the condition records also for condition type ZABC. I have checked in NACE, Application V7, I am able to find the condition type. checked in VV73, condition records displayed. But in VT02N/VT03N, we are unable to get print for  the output type.
    Why this is happening? we are able to see the procedure, condition type, access sequence, condition records in place ...why condition type ZABC is not getting triggered in the shipment output.
    Please advise and let me know if you need more details....thanks in advance.
    Thanks,
    SS

    Hi Noel,
    Thanks for your time and reply.
    We have output determination procedure for shipments, condition type ZABC, Access sequence ZABC, Condition tables 550,600,650,700 already maintained. output is working fine.we have a new requirement and created new condition table 700 with the fields" Ship to party and transportation planing point "(Condition table 700 ). we assigned the condition table 700 to access sequence ZABC. Condition type  ZABC already placed in Output determination procedure.
    We test the output, new condition record is not triggering in the output, even in output determination analysis also, we are unable to see the record 700 for the condition type ZABC. we are not sure what is the reason for the condition table that  is not picking up ? Why condition type ZABC with condition record 700 not visible in output determination analysis.
    I have checked condition records, output determination procedure. Please advise and let me know you need more details.
    Thanks,
    SS

  • Output Message Type MAHN not getting picked up in PO

    Hello Experts
       I have configured customized output type ZMAH (similar to MAHN) for reminder process. When I am creating PO this output type is not getting picked up automatically. If I am maintaining it manually I am able to send message for ME9F (Purchase Order) and ME91F (Reminder) successfully. Upon deremination analysis I am getting this message 502 " Output ignored (requirement 103 not fulfilled) ". Reminder are getting picked up from Purchase Value Key to PO.
    Any help is appreciated.
    Thanks
    Ankit

    Hello Tej
      I have maintained output device but same result.
    Here I am listing all parameters that I have used for configuration can anyone please take a look and let me know if I am missing anything
    Steps for new Message Type for PO Reminder (ZMAH)
    1.     Defined new Table 026 Purchasing Output Determination: Document Type
                                                        (ii) 027 Purchasing Output Determination: Purch. Org./Vendor for EDI
    2.     Defined new access sequence Z515 Access Sequence for Archiving.
    Following are parameters to the Access Sequence
    Access Sequence Number = 1
    Table = 026
    Description = Purchasing Output Determination: Document Type
    Requirement = 103
    Exclusive = Yes (box checked)
    Access Sequence Number = 2
    Table = 027
    Description = Purchasing Output Determination: Purch. Org./Vendor for EDI
    Requirement = 103
    Exclusive = Yes (box checked)
    3.     Maintain Output Type ZMAH for PO
    General Data
    Access Sequence = Z515
    Access to condition (Checked)
    Multiple Issuing (Checked)
    Change Output
    Program = SAPFM06P
    FORM Routine = ENTRY_NEU
    Replacement of Text Symbol
    Program = SAPMM06E
    FORM Routine = TEXT_SYMBOL_REPLACE
    Default Values
    Dispatch Time = Send Immediately (when saving application)
    Transmission Medium = External Send
    Communication Strategy = 0001 (E-mail Document)
    Processing Routines
    Transmission Medium = 5 (External Send)
    Program = SAPFM06P
    Form Routine = ENTRY_NEU
    Form = MEDRUCK
    Partner Roles
    Medium = External Send
    Funct = VN
    Name = Vendor
    4.     Fine-Tuned Control: Purchase Order
    Oprat. = 3
    CType = ZMAH
    Name = Output for Reminder
    Short Text = Urging letter (expediter)/reminder
    Update Print Related Data = Yes (checked)
    5.     Maintain Message Determination Schema: Purchase Order
    Procedure RMBEF1 (Purchase Order)
    Step = 101
    Cntr = 3
    CTyp = ZMAH
    Description = Output for Reminder
    Requirement = 103
    6.     Assign Schema to Purchase Order
    Procedure RMBEF1
    7.     Define Partner Roles for Purchase Order
    Out. = ZMAH
    Med = 5 (External Send)
    Funct = VN
    Name = Output for Reminder
    Name = Vendor
    8.     Test Condition Maintained in MN04 (Master Data)
    Purch. Org. = 0001
    Vendor = 101281
    Partner Funct = VN
    Medium = 5 (External Send)
    Date/Time = 4 Send immediately (when saving application)
    Output Device = LP01
    Cover Page Text = Reminder PO number &EKKO-EBELN&
    Also I have configured Purchasing Value Key, reminders are coming to PO correctly.
    Thanks
    Ankit

  • For some sales orders output type is not showing even thoug configured in N

    Hi ,
    I have 100 sales orders out them 10 sales orders out put type is not appearing in VA02->goto->OUTPUT->HEADER->EDIT
    In Tcode : NACE every thing is configured accordingly.
    As an abaper what can I do.

    Hi,
    1. go to transastion VA02.
    2. enter the sales order number for which you are not getting the output type
    3. go to > extras>output--> header >edit> you will get the output messages window
    4. In Application tool bar you find the ICON i (determine analysis ) or press cntr+F1.
    5. in analysis out put you will find the reason why the output type is not getting selected.

  • Pre defined set types are not determined in CAtegory

    Hi all,
    when i try to create a category for a service product for SLA, the pre defined set types are not getting populated for me.
    I have created a new hierarchy, assigned to product and product type.....
    but still when i create a category the list of predefined some of the predefined set types are not getting displayed.
    Can anyone help this issue.
    kindly advice in this regard.
    Thanks,
    Subhashini.

    Hi,
    Thanks for the reply.
    I have assigned the product type service in the category.
    This is the only custom category available. only one std category has this set types. other than that nothing is there in the system.
    is there any services that has to be activated or any authorization that is missing for me...
    nut i have sap_all...could not able to trace out the problem.
    kindly guide.
    thanks,
    Subhashini.

  • Output type is not appearing in ME22N

    Hi,
    I have created some POs through sales order.i.e created a sales order and taken the PR from that.
    Using ME59N, I have converted the PR to PO. The PO will have some output types attached (in the unprocesssed status).
    The Output types (in the MESSAGES) are visible in ME23N. When I look into the PO in change mode ME22N, the output  types are not appearing....  this is not the case with all the POs. Happening only for few POs.
    Could you please suggest.
    Ramana Malladi.

    Hello,
    Review your condition record values against the PO's that don't have an output type.
    Could be something like purchasing group, material group, etc.
    Regards
    Waza

  • Whenever a record is Edited the rows are not getting displayed in the repor

    Hi all,
    When a new record is added or edited, It is physically getting added or edited according to the process, but those records are not getting displayed in the report..
    Please Any body faced this situation...
    Help me to identify what error i am doing........
    thanks in advance
    kavitha L

    Hi KChamarti,
    I am also trying to display images insid the datagrid but i get a weird broken image(all silver gray).
    My item renderer is:
              <mx:DataGridColumn headerText="Type">
                   <mx:itemRenderer>
                     <mx:Component>
                      <mx:HBox verticalGap="2">
                          <mx:Image id="dgImage" source="\assets\images\{toLowerCase(data.type)}.jpg" />
                          <mx:Label text="{data.type}"/>
                        </mx:HBox>
                     </mx:Component>
                   </mx:itemRenderer>
                </mx:DataGridColumn>
    Am i mentioning the source of the image in the right way?

  • How come the images are not getting displayed in ie?

    Hi,
    In my application i have a page where the thumbnails
    representing the videos uploaded into the site should be
    displayed.These imgaes are getting displayed in mozilla properly,
    but when it comes to ie 7 they are not getting displayed..instead
    iam getting a broken image.Please suggest me a solution.Thanks in
    advance.

    Hi KChamarti,
    I am also trying to display images insid the datagrid but i get a weird broken image(all silver gray).
    My item renderer is:
              <mx:DataGridColumn headerText="Type">
                   <mx:itemRenderer>
                     <mx:Component>
                      <mx:HBox verticalGap="2">
                          <mx:Image id="dgImage" source="\assets\images\{toLowerCase(data.type)}.jpg" />
                          <mx:Label text="{data.type}"/>
                        </mx:HBox>
                     </mx:Component>
                   </mx:itemRenderer>
                </mx:DataGridColumn>
    Am i mentioning the source of the image in the right way?

  • Write Statements are not getting Displayed

    Hi All,
    We are going for Upgrade from 4.7 to ECC. So, in my program we have few write statements which are not getting displayed in the output. Those write statments are seen as errors in the extended check as Char. strings w/o text elements will not be translated: 'Income Tax Worksheet'.
    Could any one please help me to over come this errors and Display the wite statements.
    Thanks
    Shashikanth

    Have you mapped the checked and unchecked glyphs to be used?
    Check the doc and blog for check boxes.
    Regards
    tim

  • Data carrier & application field are not getting displayed in CV04N

    Hi Guru's
    In TCode : CV04N,  data carrier & application field are not getting displayed.
    While i compare with my IDES system, data carrier & application fields are getting displayed in CV04N.
    Let me know is there any configuration that has been missed out.
    Regards
    Bhanu

    Hi Bhanu,
    Please note that the fields 'Data carrier' & 'Application field'  are visible only if no document type is entered.
    Suppose you enter a document type and press ENTER then these fields disappear. This is because the field 'Application' was designed when only the storage is archive, vault or SAP-SYSTEM was possible and the number of added originals was limited.
    Currently DMS allows storage of originals on Content Server and there is no limit on the number of added originals, the system behavior was changed due to performance reasons. To avoid performance problems if you search for a document with a lot of originals attached this field gets invisible if you enter a document type which uses the KPRO storage.
    Regards,
    Pradeepkumar Haragoldavar

  • Portal Forms are not getting displayed in the new oracle environment.

    Hi All,
    The Forms in our Portal applications are not getting displayed after we have done the upgradation of Database in Unix from 8i to 9i. The reports are working fine.The forms that were added as portlets are not getting displayed and other forms that are called thorough links returns error when it is run. The Newly created forms are also not running but returns error. The Portal Version is 3.0.9.8.3. Pls help.
    Regards,
    Tom

    Hi ,
    Based on the requirement , check whether the customer contact has been done carried out for the invoice  , then possibility it must have gone out of the worklist , chekc whether the Invoice posted in the AR has been transferred to FSCM collection .

  • Images for tabs are not getting displayed in the page if Iam using a template

    I have page with a unstructured template. I have arranged tabs on page with images attached. But images are not getting displayed. why

    Hi,
    Please check if the images are in the server and in the /images alias path.
    thanks,
    Sharmila

  • Images from KM are not getting displayed in EP

    Hi All,
    I am using EP7.0 SP11.When I run the portal, the images are not getting displayed. When I right click on the * mark and click on Show picture, then also its not appearing.
    Location of the Images that I received from EP is mentioned below.
    http://hostname:port no./irj/go/km/docs/documents/HP_Images/Image_123.jpg
    Images are available in the location in the below mentioned path as .jpg files:-
    http://hostname:port no./irj/go/km/documents/HP_Images/Image_123.jpg
    Difference in both is a DOCS folder missing in between........
    Is this is the reason for the image not getting displayed?
    Anything more has to be done in KM part to display these images?
    May I know how to solve this issue??
    Regards,
    Athulya

    Hi,
    the right path look like this: /irj/go/km/docs/<path_to_document>.
    You may have to check you URL generator service settings. Here:
    Configuration - Content Management - Global Services - URL Generator Service(advanced section)
    and then have a look for example for the following values "Content Access Path:" and "Viewer:" normally they both have same value "/irj/go/km/docs".
    Hope that will help.
    best regards,
    --epexpert

  • QS41_Code are not getting displayed

    Dear Experts,
    Scenario is,
    1.     T-Code QS41
    2.     Under code groups (of any catalogue) certain codes have been created.
    3.     The same entries can be viewed through tables QPCT and QPCD.
    4.     Unfortunately we could not see the codes in transaction code QS41, QS42 and QS43.
    5.     We checked for authorization related object. But in spite of full authorization codes are not getting displayed.
    6.     The message that we got is No entries found that match selection criteria Message no. SV004
    Few more inputs,
    u2022     Recently patch SPKE500053 for HCM module has been updated in system. Earlier level was SPKE500043.
    u2022     Patch SAPKB64021 was updated for BASIS / BW/ ABAP. Earlier level was SAPKB64020.
    We are worried that because of these patch upload are we facing this issue? Or else kindly let us know if another solution can be applied
    Best Regards,
    Anand Rao

    Hello Anand
    I think that is the sap note to be implemented. i had also come across same issue but do not remember the OSS note number
    please look into the below link also for reference
    Link: [http://www.sapfans.com/forums/viewtopic.php?f=7&t=316640]
    Regards
    Gajesh

Maybe you are looking for