Output word document generation from the properties.

Hi Everybody,
I need to generate a word document from the Substance property values stored. How to generate a word document in a specified format..
Thanks,
Rajesh.

Hi Andeas,
              My problem is, I want to create the templates as well as i want to see the generated reports.
               While installing WWI, i got four options called 1.Information system/labelling Workstation, 2.Install generation server, 3.Workstation for editing templates and 4.WWI file server installation. I installed only third one Workstation for editing templates. Should i install other than that as well.
               I want to confirm the procedure for the release template as well. Before releasing a template you need to add the template through the DMS and next mention the same template in the CG42. After that create the variant (CG2B). Next go to CG02. I think while going through a help i gone through a sentence like first i need to upload file in CG3Z and Import template CGCZ things. I just checking whether they are working properly or not.
         Also while trying to create a template from WWITEMPLATE in the Layout folder, i used <i>WWI -> Insert Symbol</i> is not giving any values. Any idea on this
              Please give me some advice..
Thanks,
Rajesh.
Message was edited by:
        Rajesh Madala

Similar Messages

Opening Word document templates from the New Document drop down does not open Word

I have a document library with a number of Content Types attached to it. Each one has a different Word document attached. We have an intermittent problem where when you click to open one of these templates from the 'New Document' drop
down list that nothing happens. The workaround appears to be either open Word first or re-boot the computer. I think there is a problem with SharePoint not linking in with Word correctly. Does anyone have any suggestions on how to fix this?
Thanks
Julie
J Sykes

Hi J,
Can you please check in your internet explorer whether MS office Add ons enable or not.
If not enable that and restart your browser and try again.
Also try to repair MS Office if issue still persist.
Regards
Soni K

How do I convert a powerpoint presentation saved as pdf to an editable word document minus all the frames around the slides?

How do I convert a powerpoint presentation saved as pdf to an editable word document minus all the frames around the slides?

Hi Sara!
Yes this sounds interesting. Can I update to that from the PDF Export I have just renewed? How much would that cost?
Thanks for your quick answer.
Best Regards
Per-Olof Egli Logga Egli C.I.S
Managing Director
Egli C.I.S. Consulting
Lapphundsgränd 43
SE-128 62 SKÖNDAL
Sweden/Швеция
Phone: +46 708 23 03 53
<http://www.eglicisconsulting.se/> www.eglicisconsulting.se
<mailto:[email protected]> [email protected]
Skype: eglipo
Från: Sara.Forsberg
Skickat: den 10 september 2014 22:11
Till: P-o Egli
Ämne: How do I convert a pdf-presentation into Powerpoint, which it is said that I can do? I can convert into Word, but that is of no help as I need to change the text in the document.
How do I convert a pdf-presentation into Powerpoint, which it is said that I can do? I can convert into Word, but that is of no help as I need to change the text in the document.
created by Sara.Forsberg <https://forums.adobe.com/people/Sara.Forsberg> n Adobe ExportPDF - View the full discussion <https://forums.adobe.com/message/6718870#6718870>

Can i place controls from the properties dialog of an express vi on the front panel?

I'm using the spectral measurements express vi in my vi and I'd like to put the "window" and "number of averages" controls from the properties dialog on the front panel. However, there are not outputs on the express vi icon for these parameters. Can I place controls for these on the front panel somehow or do I always have to go into the block diagram and open the properties dialog to change the values?

The way to do this is to right click on the express VI and select Open Front Panel. This will convert it to a standard subVI. then go into the subVI and replace the Spectrum Averaging and Spectrum Window constants to front panel controls by right click on them. Right click the icon and select Show Connector. Wire the new controls to a free terminal on the connector. You may have to add additional terminals if there aren't any available to wire to the new controls.

When I try and open a word document I received the following message: "You cant open the application Microsoft Word because PoerPC applications are no longer supported". What is up with that?

When I try and open a word document I received the following message: "You cant open the application Microsoft Word because PoerPC applications are no longer supported". What is up with that?

Here is a post that I assembled for a similar question:
Unfortunately you got caught up in the minor miracle of Rosetta. Originally licensed by Apple when it migrated from the PowerPC CPU platform that it had used from the mid-1990's until the Intel CPU platform in 2006, Rosetta allowed Mac users to continue to use their library of PPC software transparently in emulation.
However, Apple's license to continue to use this technology expired with new releases of OS X commencing with Lion (and now Mountain Lion). While educational efforts have been made over the last 6 years, the fact is that Rosetta was SO successful that many users were caught unaware UNTIL they upgraded to Lion or Mountain Lion.
Workarounds:
1. If your Mac will support it, restore OS X Snow Leopard;
2. If your Mac will support it, partition your hard drive or add an external hard drive and install Snow Leopard into it and use the "dual-boot" method to choose between your PowerPC software or Lion/Mt. Lion;
3. Upgrade your software to Intel compatible versions, or find alternative software that will open your data files;
3. Install Snow Leopard (with Rosetta) into Parallels:
[click on image to enlarge]
Full Snow Leopard installation instructions here:
http://forums.macrumors.com/showthread.php?t=1365439
NOTE: STEP ONE of the instructions must currently be completed on a Snow Leopard or Lion Mac and the resulting modified Snow Leopard.cdr install file can then be moved over to your Mountain Lion Mac for completion of the remaining steps.
NOTE 2: Computer games with complex, 3D or fast motion graphics make not work well or at all in virtualization.

Getting a document file from the transcribed audio file

I would like to know how to get a "document" file from the transcribed files created by Soundbooth. The files created by SB have 'xml' or 'xmp' extensions and I do not know what to do with these files or how to "read" them.
I am on a macbook pro MAC OS 10.5.5. I have latest versions of Word, and Final Cut Pro.
Any help would be appreciated. This is my first foray into the world of Adobe products.
Thanks,
Eric

The Transcript XML files conform to the XML Standards, and are a "marked up" text document containing several pieces of information. You can open the file in TextEdit (on Mac) or Notepad (on Windows) and you should be able to see what sorts of metadata is saved for each word in the transcription. Each transcribed word is stored in a data block, along with its timestamp, the duration of the spoken word, and some other metadata. This information is invaluable when importing the file into other applications or databases.
Neither Soundbooth nor Premiere Pro support exporting the transcript without the additional metadata or XML tags right now, but since it's a basic text file, it should be a very simple chore for a script to parse that file and write out each transcribed word to a new file.
Durin

I updated my iPod touch 4th generation from the latest iOS 4 update (i think maybe iOS 4.3.5 or something like that) to iOS 5.1.1 and my Photos, Videos, contacts, music, App data, etc. was deleted. How can I all the data back?

I updated my iPod touch 4th generation from the latest iOS 4 update (i think maybe iOS 4.3.5 or something like that) to iOS 5.1.1. I updated to iOS 5.1.1 on a Windows XP Home Edition with the Service Pack 3 installed on the Windows XP (which I believe is the latest version). After updating, I unplugged my iPod from the computer. I saw that all my photos and videos were on my iPod, but there were no apps. A window popped up and told me to enter a passcode for my iPod. I entered a passcode. I then locked my iPod and entered what I thought to be the correct passcode, but my iPod remained unlocked. Desperate, I tried many passcodes with failure. After a while, my iPod became disabled for a long time. I decided to reset my iPod. After I reseted it, I chose to reset from my earlier back up. After reseting, my computer loaded on all my apps. But, when I started using my iPod, I realized all my photos, videos, music, app data (like game saves and high scores), etc. were gone! I have no idea what to do and I am very stressed about this! SOMEONE PLEASE HELP ME GET ALL MY STUFF BACK!!!!!!

Go to iTunea>Preferences>Devices and see if there is a backupright at the time you did the update. Then try restoring from that backup. If the apps are in your iTunes library, any app data will be restored to the iPod.
When restoring from an iOS 4 (or later) backup, if the device had a passcode set, iTunes will ask if you want to set a passcode (and remind you that you had protected your device with a passcode). iTunes will not ask you to set a passcode when restoring from iOS 3.x and prior backups.
Therefore, remembe the passcode that you enter this time.
It appears that if you restore from a backup, that backup is not subseqyently overwritten by the next backup.

I'm not able to open documents saved from the internet.

I'm not able to open documents saved from the internet. I'm using a macbook pro en Adobe Acrobat X 10.1.10. I tried: file - export als PDF and save as PDF, none of this works. I always receive a message stating an error and saying that I need to go back to the original file what I did without result. Does anyone have (or had) the same problem?

What they mean is iTunes Customer Service Contact - http://www.apple.com/support/itunes/contact.html

How to export a PDF to a word document? at the moment it came up with "The encoding (CMap) specified by a font is missing ????? what can I do? thanks

How to export a PDF to a word document? at the moment it came up with "The encoding (CMap) specified by a font is missing ????? what can I do? thanks

Hi frenchiem,
This is due to the PDF file cannot display the original fonts. To fix it, creator should create the PDF file with the embed font option enabled. Thus, user can open the file on any platform with the same layout. Or the Acrobat product can display them after you install the appropriate font support package on the client side.
Regards,
Rave

How can I store an output, i.e C from the attatchment in an array?

How can I store an output, i.e C from the attatchment in an array?
Attachments:
Testing.vi ‏18 KB

Hi, Se
Take a look my example.
Attachments:
Testing.vi ‏23 KB

When trying to open a Word document, I get the error message that PowerPC applications are no longer supported. What can I do?

When trying to open a word document, I get the error message that PowerPC applications are no longer supported. What can I do?
Thanks.

IMHO the free apps are a band aid fix. If the OP uses Office on a regular basis he will need to upgrade anyway. Personally I have used neooffice and found it substandard however that was just my take. I haven't tried Google's solution.
We both forgot to mention the OP could also use Pages and Numbers to open their Word and Excel files. If he uses Entourage then Mail and iCal would be viable substitutes.

How do I export words and definitions from the glossary widget in C7?

How do I export words and definitions from the glossary widget as XML? I need to use the same glossary in several projects. When I copy and paste the widget to a different project about 1/2 of the definitions disappear. Figured I would try exporting the words then importing them back in new glossaries in each project. Using 7 on a Mac.

Yes i read, and the answer to the main question is still the same, you cannot export, you just can import definitions if you previously have structured them into an xml file. So, first of all it would be useful to warn the user to ALWAYS start from an xml file BEFORE starting populating the glossary. Furthermore, not all users are supposed to manage easily an xml editing, and the widget itself has been programmed to insert the definitions with a simple method, so it would be necessary also to have an instrument to export to xml for importing purpose. Storyline has the same lack, you cannot move glossary from one project to another but you are forced to start from an old project or insert the glossary itself into a master project. You will agree with me that an xml export feature is not something so difficult to add for the widget. In my personal example, i added about 200 definitions, then i discovered that the glossary of captivate 7 does not work well in html5, the new one in captivate 8 is little bit better, but still not working on chrome (at least on ipad it shows, but you cannot show a button over it since it goes always on the top of everything, so at the moment i inserted a big transparent square behind it to close everyting like a lightbox). This widget is still very buggy and need to be improved.

While executing the query the output is completey different from the query

Dear friends,
We built a query and loaded the data for that infoprovider.
While executing the query the output is completey different from the query what we have built.
Output has no relevance to the query.
Kindly help the same.
Regards,
Sathya

HI Satya,
In my opinion the issue is with your front end.
Results should be identical in RSRT, BEx Analyzer (Workbooks) and the ABAP-Web since all three frontend tools use the "ABAP Runtime layer".
It may differ In the Portal where the new "Java Runtime layer". (Java-Web.) is used.
This is given in OSS Note 1296576 - Different Query Behaviour: ABAP - Java.
So i think the problem lies in your analyser. If you are using Analyzer: BI Add on 7.X (Based on 7.10) try and get support package 8.
Hope this helps.
Thanks,
Rahul

Exclude few document numbers from the load

Hi All,
I am trying to load data from a datasource in R3, (its a FM generic datasource). There are millions of records but I want to exclude few document numbers from the load. Does anyone know how to exclude? I have that field name in the selections
Thanks in advance,
shresh.

Hi Shreesh,
EIther you can write a Routine at the Infopackage level or do the FULL load upto PSA & then you can restrict the data by writing a start routine in the Transformation between this Datasource & your Data Target like
DELETE SOURCE_PACKAGE where SOURCE_FIELDS-ABC = "give your restriction here"
where ABC is the Source field name.
Hope it helps!
Regards,
Pavan

We removed Pages from the computer, but now we can't open Word documents directly. The computer keeps bringing up an alert that it can't find Pages to open the document.

We removed Pages from my husband's computer, but now when he tries to open documents that were created in Word, we can't open them directly, only through the Word Dialogue box. The computer keeps bringing up an alert that it can't find Pages to open the document.

Select one of the documents. Press COMMAND-I to open the Get Info window. In the Open With panel select Word from the dropdown menu then click on the Change All button. This should fix the problem.

Output word document generation from the properties.

Similar Messages

Maybe you are looking for