Outside stage and objects proportional scaling to 100% with resizing capabilities

Hi, i am looking for class or something to proportional outside scaling of stage and all included objects (internal or external).
I know SWFfit and LiquidStage. I have got many problems with integrating SFWfit to my code (resizing is not affected to included objects). LiquidStage seems to be ok but it`s not freeware . I am looking for free possibilities to do it.
I am trying to connect that with GAIA framework.
Can anybody help me?

Thanks a lot for your advice
I asked for it on GAIA forum but i am courious also of your opinion.
This question is not related with any framework (it may to be but it`s not have to). GAIA is wonderfull framework which alows coders to get decisions with way of code. You may use your own classes and you may use GAIA ones. I am looking to the best solution of it and as everyone knows time is not a friend for a web designer
Excuse me if i offend someone i`m only trying to get answer

Similar Messages

  • My ipod touch will not turn off and the battery (charged to 100% with trickle charge) is discharging on it's own.  Any advice please?

    My Ipod touch has not turned off for some time.  I reset it.  Now, as well, the battery which is charged to 100% and finished with a trickle charge is discharging completely overnight when not in use.  Help please, I use this all the time

    might want to consider posting in the proper forum.  This is the iPhone forum.

  • Proportional Scaling external Image to stage

    Sounds confusing I know but basically I want to place some images on the stage and I want every image, whether big or small, portrait or landscape, to be scaled to about a quarter of the stage size.
    I have tried coding this myself and even tried many suggestions found on the web, but they all seem to do the same thing. The code either sizes every image to be equal in width and varying height, or scale every image to be equal in height with varying width.
    Say you have some images all the same size, but some in landscape orientation and some in portrait orientation. Most of the code I found for "proportional scaling" would scale the landscape images okay, but make the portrait images the same height as the others, so they looked alot smaller. Or the reverse was true.
    example:
    image.width = stage.stageWidth;
    image.height = stage.stageHeight;
    ( image.scaleX < image.scaleY ) ? image.scaleY = image.scaleX : image.scaleX = image.scaleY;
    This makes all the images fit on the stage all right, but they all have the same width. reversing the equality amkes all teh heights the same.
    If two images did not have the same width before they are scaled down, they should not have the smae width afterwards in my opinion.
    Sometimes I get some code that seems to work, then I change the stage size to check it and all the images did not scale to 1/4 of the stage new size when the FLA was run.
    I bet this is simple, but I have been working on it too long, y mind is in a knot!

    I loaded an array with a Loader and then used a random a variable to pick from the array using a variable that has the length of the array in it: here is the code, but the cut and paste does not wok that well.
    import com.greensock.TweenLite;
    var XMLURLLoader:URLLoader = new URLLoader();
    XMLURLLoader.load(new URLRequest("link to picasa photo rss feed"));
    XMLURLLoader.addEventListener(Event.COMPLETE, processXML);
    var media:Namespace=new Namespace("http://search.yahoo.com/mrss/"); imagesArray:Array = new Array();
    var imagesDateUploaded:Array = new Array();//The title properties of the XML File
    //var imagesWidth:Array = new Array();
    //var imagesHeight:Array = new Array();
    var imagesLength:uint;
    var imagesLoadedCount:int=0;//A counter, counts the images loaded
    var formatFont:Myriad = new Myriad();//This is the embedded font 
    var textformat:TextFormat = new TextFormat();//A TextFormat Object
    textformat.color=0xFFFFFF;
    textformat.font=formatFont.fontName;
    textformat.size=80;//Use the same size you used when embedding the font from the Library 
    var
    function processXML(event:Event):void {
    var XMLdata:XML=new XML(XMLURLLoader.data);
    imagesLength=XMLdata.channel.item.length();
    for (var i:uint=0; i < imagesLength; i++) {
      var loader:Loader = new Loader();
      loader.load(new URLRequest(String(XMLdata.channel.item[i][email protected])));
      imagesArray.push(loader);
      var imageDate:String=XMLdata.channel.item[i].pubDate.substr(6,10);
      imagesDateUploaded.push(imageDate);
      loader.contentLoaderInfo.addEventListener(Event.COMPLETE, imagesLoaded);//A listener to the function that will be executed when an image is loaded
    function imagesLoaded(event:Event):void {
    imagesLoadedCount++;//Adds one to the imagesLoaded variable
    if (imagesLength==imagesLoadedCount) {//When all images are loaded
      prepareImages();//This function is explained in the next step  
      var maxSize:Number=stage.stageWidth/2;
    function prepareImages():void {
    //These actions will be applied to all the images loaded so we use a "for" and the "images" array to do that
    var i:uint = Math.floor(Math.random()*imagesLength);
    trace(i);
      var container:Sprite = new Sprite();//A container that will store the image, frame, TextField, TextField background and shadow
      var frame:Sprite = new Sprite();//The Frame Sprite
      var infoArea:Sprite = new Sprite();//The TextField background
      var infoField:TextField = new TextField();//The TextField
      //build the frames
      frame.graphics.beginFill(0xFFFFFF);
      frame.graphics.drawRect(-20, -20, imagesArray[i].width + 40, imagesArray[i].height + 40);
      frame.graphics.endFill();
      //creates a black rectangle in the bottom part of the image, where the TextField will be.
      infoArea.graphics.beginFill(0x111111, 0.5);//.5 is alpha
      infoArea.graphics.drawRect(0, 0, imagesArray[i].width, 100);//100 = height 
      infoArea.graphics.endFill();
      infoArea.y=imagesArray[i].height-100;
      //The following code sets the TextField properties and adds its contents
      infoField.defaultTextFormat=textformat;
      infoField.embedFonts=true;//You have to add this to use the embedded font  
      infoField.antiAliasType=AntiAliasType.ADVANCED;//This property will display the text more clearly
      infoField.width=imagesArray[i].width-5;
      infoField.height=100;
      infoField.text=imagesDateUploaded[i];//The content, obtained from the XML and stored in the Array
      //The images will have a random position based on the center of the Stage area. We use Math for that.
      //add a shadow filter
      //Distance, angle, color, alpha, blur, strength, quality
      var shadowFilter:BitmapFilter=new DropShadowFilter(3,90,0x252525,1,2,2,1,15);
      var filterArray:Array=[shadowFilter];
      container.filters=filterArray;//Apply the filter
      //adding children to container
      infoArea.addChild(infoField);//Adds the TextField to the TextField Background  
      container.addChild(frame);//Adds the Frame to the Container
    var bd:BitmapData= new BitmapData(imagesArray[i].width, imagesArray[i].height);
    var bmp:Bitmap = new Bitmap(bd);
    bd.draw(imagesArray[i]);
    container.addChild(bmp);
    // using the loader from the array directly was causing problems like only showing once.
    //  container.addChild(imagesArray[i]);//Adds the Image on top of the Frame in the Container  
      infoArea.visible=true;//We set the image information to invisible by default  
      container.addChild(infoArea);//Adds the information area in top of everything
      //resize the images to no more than 1/2 the image width or height compared to stage
      if (container.width>container.height) {// horizontal asset
       container.width=maxSize;
       container.scaleY=container.scaleX;
      } else {// vertical asset
       container.height=maxSize;
       container.scaleX=container.scaleY;
      container.x = Math.floor(Math.random()*(1+stage.stageWidth - container.width-20))+20;
      container.y = Math.floor(Math.random()*(1+stage.stageHeight - container.height-20))+20;
      //the  plus and minus 20 keeps the image in the stage boundary. something wrong with the container width calculations
      this.addChild(container);//Lastly, we add the Container to the Stage
      container.alpha = 0;
    TweenLite.to(container,1,{alpha:1});
      trace("Just added child");
    var timer:Timer = new Timer(5000,1);
    timer.addEventListener (TimerEvent.TIMER, initTimer);
    timer.start();
    function initTimer(event:TimerEvent):void{
    trace("Timer started");
    prepareImages();
    timer.reset()

  • SWFLoader - SWF showing objects outside stage

    Hi... I have a SWF that I am loading with SWFLoader. For some
    reason, all of the elements that are outside the stage in the SWF
    (animated objects) are showing in Flex. How do I only show the SWF
    as it is supposed to be seen? I have set height and width on both
    the SWF and a container canvas.

    You need to create a rectangle that's exactly the same size
    as your document / stage, and make it a mask and put all of the
    layers in the document underneath it. That should take care of
    it.

  • Enlarge stage and center existing objects?

    Gibt es eine Mgk. wenn mann die Pixelzahl der Bühne in
    einem Bestehenden Film (mehrere Szenen) vergrößert, dass
    die bestehenden Obje
    kte nicht oben links, sondern um einen definierten Versatz,
    oder z.B. mittig platziert werden.
    oder wie kann man alle bestehenden Objekte auf einmal
    verschieben?
    Is there a opportunity to enlarge the stage (pixel) in an
    existing fla and move all existing objects in one time for example
    to center?

    atrzebunia wrote:
    > Is it possible to resize the stage from the center
    instead from the upper left
    > corner?
    Nop, unfortunately not possible.
    > I've created a flash document, but it is smaller than I
    thought it
    > would be, and now I have too much blank space around the
    objects that are
    > centered on stage. When I change the size of the stage,
    the objects are no
    > longer centered on stage. I really don't want to
    re-center all objects on the
    > smaller stage. Thanks for your suggestion(s)...
    The only way is to use the "Edit Multiple Frames" option and
    manually re adjust all the
    content after you change the stage size. There is no way to
    automated it.
    The EMF button is next to the FPS indicator under your
    timeline.
    For detail info on how to use it search the FEATURE section
    of your manuals for "Moving an entire animation"
    Best Regards
    Urami
    "Never play Leap-Frog with a Unicorn."
    <urami>
    If you want to mail me - DO NOT LAUGH AT MY ADDRESS
    </urami>

  • Spawning Objects to Stage and making them move a certain distance in a given direction.

    Here is my code:
    function createEnemy(event:TimerEvent):void
                    var enemyAppear = new MovieClip;
                    enemyAppear = new Enemy();
                    enemyAppear.x = Math.random()*stage.stageWidth;
                    enemyAppear.y = 285;
                    enemyStorage.addChild(enemyAppear);
                    //Removes Enemy From Stage and adds a point to scoreboard
                    stage.addEventListener(MouseEvent.CLICK, clickEnemy);
                    function clickEnemy(event:MouseEvent):void
                    if(cursor.hitTestObject(enemyAppear))
                            enemyAppear.parent.removeChild(enemyAppear);
                            stage.removeEventListener(MouseEvent.CLICK, clickEnemy);
                            score++
                            messageDisplay.text = String(score);
    What I am trying to do is spawn a enemy to stage and when it appears on the stage I would like it to move across the stage a certain distance.
    Visual Example:
    O = enemy,   X = original position, Y = new position
    O (Spawns @ Location X)   X ---------------------------------------------------------> Y ( Moved from location X to Location Y)
    Any help would be appreciated.
    Thanks Casey

    You can start by trying the built-in Tween class, and if you're happy with getting that working the way you want, you can consider moving on to a third party tweening class such as TweenLite...
    import fl.transitions.Tween;
    var certainDistance:Number = 200;
    var moveTime:Number = 2; // seconds
    function createEnemy(event:TimerEvent):void
                    var enemyAppear = new Enemy();
                    enemyAppear.x = Math.random()*stage.stageWidth;
                    enemyAppear.y = 285;
                    enemyStorage.addChild(enemyAppear);
                    //Removes Enemy From Stage and adds a point to scoreboard
                    stage.addEventListener(MouseEvent.CLICK, clickEnemy);
                     var tweenX:Tween = new Tween(enemyAppear, "x", null, enemyAppear.x, enemyAppear.x+certainDistance, moveTime, true);// tween out
                    function clickEnemy(event:MouseEvent):void
                    if(cursor.hitTestObject(enemyAppear))
                            enemyAppear.parent.removeChild(enemyAppear);
                            stage.removeEventListener(MouseEvent.CLICK, clickEnemy);
                            score++
                            //messageDisplay.text = String(score);

  • FrameMaker 10 - Finding all graphics in a book with a Object Properties Scaling equal to 0%?

    Is there a way in FrameMaker 10 in the book to quickly find all imported graphics (.bmp, .cgm, .jpg, & .wmf) that are out-of-aspect ratio or where the Object Properties Scaling equals 0%?
    I import a lot of graphic (around a 100 or so) in FrameMaker 10 and I would like to be reassured that all imported graphic have the correct aspect ratio, and find any that are wrong quickly.
    I would like to be able to do this search in the Book format rather than each section.
    Is there a way to do this?
    Thanks!

    Denis, this would require scripting. ExtendScript would likely be the first choice and would be perfect for the job. Given that you want to operate on the whole book at once, the script would be a little bit longer, so you might not get someone to post it here for free. I would consider it because it would be a nice addition to the samples on my website, but I can't do it right this minute. If no one offers for free, hit me up in a day or two and I might be able to accommodate  you.
    One question though... are you really looking to verify the aspect ratio? This could be a considerably more complicated task. FrameMaker doesn't save the original ratio, so you would need to reimport the graphic into some other scratchpad area, calculate the aspect ratio, then compare it to the place of reference. I'm not sure that I could go that far.
    Alex, I think you may have misunderstood the question. Also, it's not even clear if these are structured files, and if so, if there is a structured application to save as XML.
    Russ

  • Redifine scaling at 100% not holding as a default

    Hello,
    I have a document with images. Normally, the Selection Tool always says the box is 100%, and the direct selection tool, gives me the scaled size of the image. However, if I do scale the box, it stays on that number as well..I have to now manually go top the flyout menu in the control palette and set the box to redefine scale at 100%.
    How do I make this the default setting so it stays checked to always redefine scale at 100% for the Frame only?
    thanks!
    babs

    I'm not exactly sure what you're asking, but I'll try to answer. In General preferences, you can determine how scaling is reflected in the interface by choosing either Apply To Content or Adjust Scaling Percentage. If you select Apply To Content, scaling values are reset to 100% in the Control panel after the object is scaled. If you select Adjust Scaling Percentage, scaling values remain as specified (such as 125%), and you can choose Redefine Scaling As 100% from the Control panel menu to reset the scaling percentages to 100%.
    FYI, this preference setting also affects how scaled text is reflected in the UI. For example, let's suppose you start with 12 point text and scale the text frame to double its size. If Apply To Content is selected, the Control panel displays the text size as 24. If Adjust Scaling Percentage is applied, the Control panel displays the original text size followed by the scaled size in parentheses: "12 pt (24)."
    It sounds like you have Apply To Content selected, and you may want to use Adjust Scaling Percentage. Is that right?

  • How do I interact between stage and classes?

    Hi,
    I have asked this question before, and all I got is "Go back
    to reading beginner books", so I'm hoping that someone here is
    willing to actually answer my question as opposed to brushing me
    off because they were unwilling to help...
    And yes, I have read books on the topic and gone through tons
    of the documentation and not found the answer to this. I have
    ActionScript 1 and JavaScript experience, so this whole business
    shouldn't be this hard.
    I am using ActionScript 3 in Flash CS3.
    My problem is this:
    I need to find out how to send commands between stuff on the
    stage and stuff that's defined in a class.
    I have had this issue for ages and kept trying to find ways
    around it since so far I haven't been able to find help for it.
    For example:
    When using a document class, how can I access the current
    frame number of the Stage?
    Or using a document class, how can I access any object (like
    a MovieClip with instance name) that was put on the stage using the
    IDE?
    Currently, to be more specific, I am trying to do something
    really simple:
    Make a button work on my stage that is not always visible.
    With AS3 that's not as easy anymore as it used to be.
    So what I did now is create the button in the document class,
    used addChild and set it to alpha = 0.
    Now, when the Stage reaches specific frames (i.e. ones with
    labels, and I got this part figured out), it is supposed to make
    the button visible. Then I can add event listeners and stuff, and I
    can figure that part out myself.
    I don't know how to access the stage frame number from the
    document class, so I put it into a frame script in frame 1, but now
    this script cannot access the button that is defined in the
    document class.
    It's driving me bananas...
    PLEASE, someone here, can someone please explain to me how I
    can make this work?
    I have seen plenty of diagrams of the Display List and the
    Object Hierarchy, but none of that explains how to actually USE any
    of it...
    Thanks so much in advance to anyone who is willing to spend
    some time to answer!

    Well, first of all, I have to say that AS3 has basically been
    designed to be difficult on purpose, in that all this interaction
    between objects is purposefully very strict. For this reason, I
    still use AS2 for all my basic Flash work. AS3 is just a lot more
    involved, a lot more strict, a lot less forgiving... you need a lot
    of experience with it before it starts to make sense.
    Now, I think I might have a few specific answers to your
    questions:
    From any DisplayObject (this includes any Document class,
    which has to extend MovieClip or in some cases Sprite) you can
    access the Stage using the 'stage' property.
    However, stage is probably not exactly what you want, you
    want the main timeline, which is the child of stage. To access the
    main timeline, you can use the 'root' property of any
    DisplayObject.
    However, unless you have strict mode off, Flash won't let you
    just say "root.myMovieClip" because the root property is of the
    type DisplayObject, which is not a dynamic class (meaning you can't
    add properties to it) and it has no built in property "myMovieClip"
    so it thinks you made a mistake. So you have to "cast" the root
    property as a MovieClip, which *is* dynamic so it will let you try
    to reference anything on it (like AS1/2 did for everything.)
    So what all that means is this should work from inside you
    document class:
    (root as MovieClip).myMovieClip
    or
    MovieClip(root).myMovieClip
    Either will successfully reference a MovieClip you had put on
    the main stage in the IDE and named "myMovieClip".
    Rather than setting the alpha to 0, try setting visible to
    false. I think this will disable all interactive events, where
    simply setting alpha to 0 would make it still be interactive.
    HTH

  • Problem with editing the size of artboard and objects in illustrator!

    I was using a custom size of artboard in illustrator, but I now I want to change it to A4 size for printing. However, when I change it to a A4 size artboard, the size of objects on that artboard remain unchange. As a result these objects do not fit the new size of artboard. Are there any way that I can change both the size of artboard and objects at once? Thank you!

    Probably not.  Don't suppose you have a proportion scale handy?  Alright, don't worry about it.  Give me the size of your original ( in inches ) and the size of A4 ( in inches ), I can give you the scale percentage ( you input into the scale dialog box ).  Whatever you do, keep your original file and do the enlargement on a "copy" of the original.  You already have the new artboard, not it is just a simple matter of enlarging the artwork to fit the new size.

  • Transport an Appraisal and Objective Setting Template

    Note the following advice pertaining to transporting an appraisals and objective setting template (I have not found documentation about this anywhere else, so hopefully some of you find this useful):
    Scenario:
    You have maintained your templates in PHAP_CATALOG_PA in the main config client, and you have transported all other configurations (basic settings, etc.) to your unit test/integration test environment.
    However, although you have right-clicked the category groups and templates to be transported and included them in a transport request, you find that only some of your configuration (or perhaps none at all!) is arriving in the target client when the transport is performed.
    You may initially be able to work around this by downloading/uploading your config, but once your templates contain more complex configuration (such as using dynamic element references, etc.) you will find that this is no longer a feasible approach.
    Cause & Resolution:
    The problem is caused by outdated information in the workflow definition environment (transaction SWU3), and specifically the section labeled "Check Entries from HR Control Tables".
    Run transaction SWU3, expand tree node "Maintain Definition Environment" (which should be marked with a red cross at this stage) and click on "Check Entries from HR Control Tables". The information presented in the right-hand pane indicates that:
    If there are errors regarding the transport objects PDST or PDWS, the relevant entries are not maintained in table SOBJ. You can use the report RHSOBJCH to rectify this later.
    Proceed as suggested and run report RHSOBJCH (through SE38 or SA38) in the config client (i.e. where the templates are to be transported from). This has no side-effects I am aware of other than updating the reference information required.
    If you now run SWU3 again you should find that the "Check Entries from HR Control Tables" node is marked with a green tick.
    Simply go back to the catalog, include your cat.groups & templates in a transport again, and Voila! Our work here is done.
    Happy transporting...
    Side-note: You may ask (as I did) what transporting of appraisal templates has to do with workflow, but it just so happens that the PD objects and infotypes associated with appraisals (VA, VB, VC, etc.) are transported through the same mechanism as workflow templates (which are also PD objects). if you peek inside the transport you will note that everything to do with the template and category group configuration is bundled inside PDWS and PDST transport objects...
    Edited by: Francois Van Lille on Jun 29, 2009 9:58 AM

    >
    A. Jimenez wrote:
    > Hi Francois,
    >
    > I have successfully transported Categories and Templates, but I have customized "appraisals process", which seems to create VH Objects, and this objects or customizations are not added in the transport order.
    >
    > You or anyone know how to transport this customization?
    >
    > Thanks in advance
    Hi Abe,
    what is the appraisal process you are talking about?  The new stuff in ep4 where you define the process and steps which create the roadmap at the top of the document?  if so SAP does not have a great straightforward solution, but they did provide us some options.
    you can check out this thread and if you want I can send you the full document that is referred to in the post. 
    EP4: Performance Management-Flexible-Transporting the Tab & Process config

  • Stop all movieclips on stage and it's nested movieclips

    Looking for a way to stop all movieclips both are the stage and that are children of the ones on the stage.
    I toyed with looping thru stage's children so I can first target clips on the stage. But I am getting error. Any help?
    for (var i:int = 0; i < this.numChildren; i++)
         if (this.getChildAt(i) is MovieClip)
                        this.getChildAt(i).stop

    You will get a different error if that was just a typo... a 1119 is a property error, a 1061 is a method error, which is what you should have been getting if you just had a typo in your posting and not in your code.    In any case, try casting the object to be a MovieClip and that should solve the probem...
    if (this.getChildAt(i) is MovieClip){
         MovieClip(this.getChildAt(i)).stop();

  • How to build proportionally scaled, full bleed background images correctly

    How do I build full bleed proportionally scaled background images that proportionally scale to different sizes of browser windows and without leaving any blank spaces at the right or bottom? How do I make sure that the text also scales proportionally?

    With CSS:
    body {background: url(your_BGimage.jpg) repeat}
    You need to use small, seemless images strips or tiles that are suitable for repeating across and down the page.
    http://alt-web.com/Backgrounds.shtml
    Large background images or photos do not resize in browser unless you build your site entirely in Flash.
    Font-size is dependant upon the end user's browser settings.   Viewport size doesn't effect text size.
    Nancy O.
    Alt-Web Design & Publishing
    Web | Graphics |  Print | Media Specialists
    www.alt-web.com/

  • Need sequence and object - where to put them

    Hello:
    I am also learning ORACLE coming from MS SQL - lost of interesting new points of views and that is where i am stuck.
    Inside a stored procedure, I need to create a temporary space to hold records returned from other stored procedures.
    It appears that I should create a TEMPTABLE TYPE AS OBJECT() and a CREATE SEQUENCE unid start with 1 on the TEMPTABLE column...
    I seem to recall in one of the numerous articles I have been reading that for the stored procedure to compile, these OBJETCS AND SEQUENCE must exist PRIOR to stored procedure compilation.
    If that is true, is that the purpose of creating a package, a space where I can create objects and other sequences and types so that the Stored Procedures know about them before compilation...
    So the following wont work.....
    create or replace PROCEDURE REP_CS_DETACT_MASTER
    DIVISION     IN VARCHAR,
    BEGINDATE IN VARCHAR,
    ENDDATE IN VARCHAR,
    MyResultset OUT SYS_REFCURSOR
    AS
    CREATE SEQUENCE unid start with 1
    BEGIN
    CREATE TYPE TEMPTABLE AS OBJECT
    unid integer,
    smid varchar(100),
    sm varchar(200),
    AssignedCases integer,
    ClosedCases integer,
    OnHand integer,
    RecoveryDollars Money
    <++++++++++++++>
    END REP_CS_DETACT_MASTER;
    Thank you
    T

    So I asked
    >
    Perhaps if you explain what you are trying to achieve, instead of how you are going about it,
    >
    GADOI wrote:
    My MS - stored procedure currently creates two temporary tables - if you will - one a toptable and one is temptable.This is how you are doing <something>
    In the toptable, I insert a bunch of peoples names that come from what is returned as a result of calling another stored procedure.This is how you are doing <something>
    The structure of the TOPTABLE in MSSQL is...
    create table #temptable (unid integer identity(1,1), smid varchar(100), sm varchar(200), AssignedCases integer, ClosedCases integer, OnHand integer, RecoveryDollars Money)
    so essentially, calling the first stored procedure will result in unid incrementing and smid being populated.This is how you are doing <something>
    Then I want to do a series of updates to the following columns as resulting from data called by other procedures.This is how you are doing <something>
    So the next stored procedure will populate sm..
    update #temptable set sm = <> where smid = ....
    unitl all the columns are populatedThis is how you are doing <something>
    then the contents are returned to the client and the tables are destroyed.This is how you are doing <something>
    there.... There we now have a lot more how and not any more what that <something> that you are doing is.
    unless some of you brillant engineers/architects out there have a different approach...I would write a query that returns whatever the <something> is that is needed by the client.

  • Article: Object-flow Programming - Merging Dataflow and Object-Oriented Programming

    I just posted an ExpressionFlow article:
    Object-flow Programming - Merging Dataflow and Object-Oriented Programming
    I guess you may find it interesting. If you like it, you should
    bookmark it with one of the social bookmarking tools (click the
    bookmark link next to the timeline image in the article). That may help
    us to get readers and comments from outside the LabVIEW community. And
    don't hesitate to participate the discussion. I'd love to hear you
    comments on the subject.
    Tomi
    Tomi Maila

    After having problems with spam block software malfunction, I was able recover the following comments to the EXPRESSIONFLOW article Object-flow Programming - Merging Dataflow and Object-Oriented Programming
    Written by Zen:
    Some combination of data-flow and object-oriented programming, I think,
    could make a great impact on sysytem development.  However, I see it in
    slightly different way than yours....
    Written by Matt Holt:
    I don't believe NI can get object-flow programming to move far enough
    into mainstream that Forbes would cover it. NI has a bit of a
    stranglehold on LabVIEW with it's price as compared to say… VS2005. It
    seems that by promoting it as "easy to use" that NI may have shot
    itself in the foot….
    Written by Jim Kring:
    Hi Tomi, In my opinion, LabVIEW's native object-oriented programming
    capabilities (LabVOOP) do not currently provide a complete tool for
    allowing us to implement our OOP system designs.  Nearly all of my
    system designs require distributed active objects by reference. I think
    that National Instruments certainly can evolve LabVIEW to address such
    requirements, but I think that it is not a real focus of NI....
    If anybody else is missing their comments, I'm sorry I was unable to recover them. Please repost your comments, I appology for the inconvenience.
    Tomi Maila

Maybe you are looking for

  • Email gets queued, but not sent until I login to my account on the server.

    This is very strange. Let me explain. 1. Snow Leopard Server 10.6.2 running on an iMac. 2. I have the Mail Service running on the server. I can receive emails without problems. 3. Using my Snow Leopard Server email account, I attempt to send an email

  • Adobe AIR Application Installer.exe

    On my win xp pro sp3 machine from all the Adobe stuff following software installed only: - acrobat reader - flash player - shockwave player The Secunia scan tool noticed me recently I had old version of flash player. It is not right, some days ago ju

  • Archiving Older Email Messages in Apple Mail

    Hi, I have searched here and the Internet, but I can't find an answer. I am using OS X 10.8.2 and Mail 6.2. I have emails dating back to 2008. I want to clear out my Inbox so, I was hoping that I could archive my old emails, but still have them avail

  • MS SQL Server 2008 server is experiencing blocking

    All, The DBA & I are at a loss as to what could be causing an intermittent alert to be produced against the MS SQL Server 2008 server. The following email is what I've been provided: SQL Services Alert: COMPANY.com - COMPSQL01 is experiencing blockin

  • How to add new database server instance in Sharepoint 2010?

    I have installed SQL server 2012 BI edition and I have been trying to add new SQL Server reporting services in Sharepoint 2010 central admin .But When I click "ok "after giving the new SQL server name in the SQL Server reporting service creating proc