OVD Adapter and ldif file

Hello,
When you create an OVD database adapter, does OVD automatically create an ldif file the first time you connect using the client view?
Thank you.

Hi,
Try to increase your server parameters as below and try ....then you would be able to process large data
u2022     UME Parameters : May be we need to look into the pool size and poolmax wait parameters - UME recommended parameters (like: poolmaxsize=50, poolmaxwait=60000)
u2022     Tuning Parameters: May be we need to look/define the Message Size Limit u201Clike: EO_MSG_SIZE_LIMIT = 0000100u201D under tuning category
u2022     ICM Parameters: May be we need to consider ICM parameters (ex: icm/conn_timeout = 900000. icm/HTTP/max_request_size_KB = 2097152)
Regards,
Naveen

Similar Messages

Sender File adapter and duplicate file processing

If I set the sender file adapter to delete or archive and when a file gets picked up and processed, this file will not get deleted/archived unless it was successfully processed. However, if it errors out during processing, the file remains but it's message will get persisted in the integration engine or adapter engine. Since there's automatic retry, we have the potential for duplicate processing as in addition to the retry, the file is still continously polling for this file. In other words, how do we stop this duplicate file processing?
Thanks.

Hi Bevan,
However, if it errors out during processing, the file remains but it's message will get persisted in the integration engine or adapter engine.
your file wont get deleted unless adapter engine sucesfull pickups. if does not picked up at adapter engine then is not stored in adapter engine . if it reached Intergation Server and failed their then file would be deleted.
please let me know if you haveany questions
please reward points
Regards
Sreeram.G.Reddy

File adapter and large file

hi experts, i have a problem:
i have configured sender file adapter to send 4mb file from FTP server, so when i upload file to FTP, file adapter don't upload it, file just stay in folder.
I have tried to upload small file, is about 16kb, so it works fine, without any errors
I checked communication channel log in RWB, there are not any errors, all leds are green.
So i don't know how to upload 4mb file, also i checked all rights and permissions for file and user, they all have admin rights - "777".
Can anybody give me some suggestion or solution?
Thanks all for reply.

Hi,
Try to increase your server parameters as below and try ....then you would be able to process large data
u2022     UME Parameters : May be we need to look into the pool size and poolmax wait parameters - UME recommended parameters (like: poolmaxsize=50, poolmaxwait=60000)
u2022     Tuning Parameters: May be we need to look/define the Message Size Limit u201Clike: EO_MSG_SIZE_LIMIT = 0000100u201D under tuning category
u2022     ICM Parameters: May be we need to consider ICM parameters (ex: icm/conn_timeout = 900000. icm/HTTP/max_request_size_KB = 2097152)
Regards,
Naveen

File Adapter and Determining File Size

I have added a Header Variable to my Receive activity so that I can capture the size of the file coming in. I've also added a "size" element to the InboundFileHeader.wsdl.
I can't figure out how to populate that header variable! I was hoping it would just be populated automatically since I've added the element to the wsdl but no such luck, just null variables.
Thanks.

865094 wrote:
... if we have File protocol available inside proxy, where do we need File adapter then?The FileAdapter (JCA Resource) can be also used by BPEL/Mediator... I would always first consider using File protocol for OSB, unless there's some feature in the JCA adatper that may be interesting for a particular use case (like native format builder for example)...
Cheers,
Vlad

How to read accdb and mdb files using JDBC or File Adapter

Hi,
How to read and extract the .accdb and .mdb files from FTP server and parsing into xml by using FTP or JDBC Adapter in SAP PI7.11 With linx Os.
Regards
Upendra

Hi,
As per SAP note:1681420 i have to install the below driver from Microsoft
Our SAP PI installed under Unxi OS ,how to install the driver (.exe file) .
Driver name :AccessDatabaseEngine_x64.exe
Url:Download Microsoft Access Database Engine 2010 Redistributable from Official Microsoft Download Center
1681420 - PI : Where to locate the JDBC Driver for Microsoft Access
Regards
Upendra

Need help with a simple process with FTP Adapter and File Adapter

I am trying out a simple BPEL process that gets a file in opaque mode from a FTP server using a FTP adapter and writes it to the local file system using a File Adapter. However, the file written is always empty (zero bytes). I then tried out the FTPDebatching sample using the same FTP server JNDI name and this work fine surprisingly. I also verified by looking at the FTP server logs that my process actually does hit the FTP server and seems to list the files based on the filtering condition - but it does not issue any GET or RETR commands to actually get the files. I am suspecting that the problem could be in the Receive, Assign or Invoke activities, but I am not able identify what it is.
I can provide additional info such as the contents of my bpel and wsdl files if needed.
Would appreciate if someone can help me with this at the earliest.
Thanks
Jay

persiandude wrote:
Topic: Need help with if, else, and which statements and loops.
How would I display 60 < temp. <= 85 in java
System.out.println("60 < temp. <= 85 in java");
another question is how do I ask a question like want to try again (y/n) after a output and asking that everytime I type in yes after a output and terminate when saying No.Sun's [basic Java tutorial|http://java.sun.com/docs/books/tutorial/]
Sun's [New To Java Center|http://java.sun.com/learning/new2java/index.html].Includes an overview of what Java is, instructions for setting up Java, an intro to programming (that includes links to the above tutorial or to parts of it), quizzes, a list of resources, and info on certification and courses.
[http://javaalmanac.com|http://javaalmanac.com]. A couple dozen code examples that supplement [The Java Developers Almanac|http://www.amazon.com/exec/obidos/tg/detail/-/0201752808?v=glance].
jGuru. A general Java resource site. Includes FAQs, forums, courses, more.
JavaRanch. To quote the tagline on their homepage: "a friendly place for Java greenhorns." FAQs, forums (moderated, I believe), sample code, all kinds of goodies for newbies. From what I've heard, they live up to the "friendly" claim.
Bruce Eckel's [Thinking in Java|http://mindview.net/Books/DownloadSites] (Available online.)
Joshua Bloch's [Effective Java|http://www.amazon.com/Effective-Java-2nd-Joshua-Bloch/dp/0321356683/ref=pd_bbs_1?ie=UTF8&s=books&qid=1214349768&sr=8-1]
Bert Bates and Kathy Sierra's [Head First Java|http://www.amazon.com/exec/obidos/tg/detail/-/0596004656?v=glance].
James Gosling's [The Java Programming Language|http://www.bookpool.com/sm/0321349806].

Mail Adapter and File content conversion.

I have a scenario to send data from SAP to 4 different boards. I have used a Multi mapping for this scenario. I am using Proxy for SAP to xi and SOAP, File and Mail adapter for the external connections.
Questions:
1) I need to send a mail in CSV or Excell format in one scenario. I have used AF_StrictXml2Plain Module but its not working? any thoughts?
2) In the file adapter I have to add the YYYYMMDD (current Date) to the file name? when I use timestamp i get the time too, any way of getting only date? I cant use the Variable substitution as i dont have date in my payload.
3) Receiver File content conversion:
My Message Type Looks like this
MT_XX_XX
     Row
        title
        xxx
I have used these parameters:
Recordset Structure: Row
Row.addHeaderLine : 0
Row.fieldSeparator : ,
Row.endSeparator: 'nl'
am I doing something worng, the file content conversion doesnt work.
Please let me know
Thanks in advance

Hi,
Make sure u are using the bean before the mail adapter bean.
Before using the file content conversion make sure that there are no substructures in it , in order to use addheader line as 0. else use addheaderline 3 and give the headerline as comma seperated values
for e.g if this is the type then addheader line= 0
Type 1 :
Record_Mt
     Row
         field1
         field2
else if this the type then addheaderline = 3
*Type 2: *
Record_Mt
     Row1
         field1
         field2
     Row2
         field1
         field2
add module like this
localejbs/sap.com/AF_Modules/StrictXml2PlainBean
with the module key e.g. key
for type 1 struct (as above )add parameter- key as singleRecordType and value as Row with comma seperated value. (remember header line is 0)
for type 2 structure (as above )add parameter- key as recordTypes and value as Row1, Row2 with comma seperated value. (remember header line is 3)

File Adapter and Third party system

Hi,
I am new to XI and implementing a simple scenario.
In SLD- I have 3rd paty software component and product.
3rd party technical system: using my pc - For host name I am using my machine name.
Scenario: Using file adapter transform csv file to xml.
File resides on my machine. I have configured file adapter inbound and outbound. Integration Dir & Rep objects are all activated.
But nothing happens, cannot see any message in Messgae monitoring..
Any help would be great.. Is my technical system setup wrong?
thanks

chk whether the folder in your m/c where the CSV file resides is shared and has appropriate access. Also you need to specify your m/c IP with fwd slashes, e.g) //<Ipaddress>/foldername
configuring your m/c as a Third Party system in SLD is fine.
If you think ur SLD settings are not correct, you can define your file adapter commn. channel in a Business Service(which does not require an SLD entry) and check whether it works.
Thanks
Saravana

Sender File Adapter and NFS

I am having a sender file adapter and is using NFS as the Transport Protocol. This channel is throwing an error that " directory does not exist". What can be the possible solutions for this problem?
When I had previously checked this , it was working fine but now its throwing this errorr.

Hi Neelansha,
If you select the transport protocol for NFS, Mention the Directory name for where we can get data.
and check the communication channel monitor for file sender, it will shows the clear error.
Regards,
Sateesh

File Adapter-handling erroneous files and let channel continue to poll file

Hello,
Even tough there is not an out-of-the-box solution in PI, I'd like to hear your suggestions. When having a file sender communication channel to pick and send files, there are cases where we get errors at the adapter level. These errors are generally due to errors in the file, which will, for example, lead to conversion errors. When this happens, this communication channel will present us an error and will continuously try to pick the erroneous file till we fix the error in that file. Now imagine the situation where in the same folder you have another 1000 files to be picked up and these are all right. Despite this fact, the communication channel will continue to be in an error state till it can process the first file. My question is, what's your generic and standard solution to automatically place this erroneous file in an erroneous folder directory enabling the communication channel to process the other 1000 files?
Thank you for your suggestions.
Goncalo Mouro Vaz

Hi,
As said above...that option need to be utilised in case of error files....
search SDN if need more details...and coming to the second u mentioned that if 1000 files are there for processing and waiting...
if file adapter criteria for processing the file matches and if file is correct then those files will get processed inspite of one error file also...
Hope this clears your queries...
HTH
Rajesh

SRFC-adapter and file adapter with error: no adapter found

Hello,
we have two scenarios here in an XI 3.0 SP12:
First scenario connects two R/3 systems via RFC adapter (outbound / inbound) for an RFC in a standard R/3 function module SUSR_ZBV_GET_REMOTE_PROFILES.
The RFC is synchronous.
Second scenario uses file adapter to send file from A to B.
When starting the RFC call from the sender system the error message in area "call adapter" for XML message in the trace is "exception while reading from SLD:Property sap_xiadapterservice.adapterType does not exist".
Message in RWB:
"Transmitting the message using connection http://abc038.ceu.test.com:8077/sap/xi/engine?type=entry failed, due to: XIServer:AE_DETAILS_GET_ERROR:Property sap_xiadapterservice.adapterType does not: Unable to find any Adapter Engines."
Same problem for file adapter!
Here is the message from the file adapter error log entry in SXMB_MONI:
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="INTERNAL">AE_DETAILS_GET_ERROR</SAP:Code>
<SAP:P1>af.kx1.test038</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>Property sap_xiadapterservice.adapterType does not: Unable to find any Adapter Engines</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack>Error when reading the access data (URL, user, password) for the Adapter Engine af.kx1.test038</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Looks like an identical problem for both adapter.
What we have done (checked) so far:
- SLD connection is working
- Vis.Admin.: no problems found
(SAP RFC adapter active, file adapter active)
- Component monitoring: no errors, adapters are fine
- all rfc connections checked: ok
- have checked user and pwd and replaced to be sure
- cache refresh: ok
- reimport of SWCV to IR for RFC: done, no result
Does anybody have an idea, how to get rid of that?
Best regards
Dirk

Hello Udo,
in Adapter monitoring all adapters are listed and per adapter (here RFC and FILE) all adapter entries from the scenarios are available (sender / receiver comm. channel entries - in green)!
Pipeline URL in SLD Bus. Syst. is fine ( and an IDOC adapter scenario is running successfully) !
I think this is a really tricky one!
Best regards
Dirk

File Adapter : read XML file with data validation and file rejection ?

Hello,
In order to read a XML file with the file adapter, I have defined a XSD that I have imported to my project.
Now the File Adapter reads the file correctly but it does not give an error when:
- the data types are not valid. Ex: dateTime is expected in a node and a string is provided
- the XML file has invalid attributes.
How can I manage error handling for XML files ?
Should I write my own Java XPath function to validate the file after is processed ? (here is an example for doing this : http://www.experts-exchange.com/Web/Web_Languages/XML/Q_21058568.html)
Thanks.

one option is to specify validateXML on the partnerlink (that describes the file adapter endpoint) such as shown here
<partnerLinkBinding name="StarLoanService">
<property name="wsdlLocation"> http://<hostname>:9700/orabpel/default/StarLoan/StarLoan?wsdl</property>
<property name="validateXML">true</property>
</partnerLinkBinding>
hth clemens

JCBC Adapter and File adapter not processing messages

Hi
I noticed that messages are being delivered to Adapter engine and the same are visible in Runtime Workbench with status "to be delivered". But, JDBC Adapter and File Adapter not processing these messages.
Any idea where I can find the problem?
I was able to re-deliver successfully via the JDBC Adapter using the MessagingSystem GUI using XISUPER user.
Regards
Chandu

Hi,
1.Status: TO_BE_DELIVERED
Which means that the message was successfully delivered from Integration Server point of view and it states that the messages is initially handed over to the Messaging System.
TO_BE_DELIVERED occurs while the message is put into the Messaging System receive queue.
Regards
Agasthuri Doss

How to generate .pdx file using File Adapter and FTP Adapter

Hi,
is it possible to genearate .pdx file using oracle ESB Adapters(File Adapter and FTP adapter).
Can you anyone guide me.
Thanks,
Raj.

hi,
regarding report, there is a dedicated report forum. you should post there.
but answer for your question is form is nothing to do with the pdf generation. you can call the report from the as usual.
In the report you should set the properties like
destype to 'file'
desname to 'path with file name'
desformat to 'pdf'

Diff between Seeburger Adapter and File Adapter

Hi All,
My company needs to interact with some banks and the banks are particular that they want SFTP, which is not supported by File Adapter, so we have decided to go with Seeburger adapter.
Now what are the differences between File adapter and seeburger adapter?
I believe that Seeburger adapter does not support File Content Conversion, Archiving etc.
Could you all pls put some light on the diff between file adapter and seeburger adapter when it comes to dealing with files?
Xier

Hi
You are aware with working of File Adapter.
The most direct way of using the Seeburger adaptors is to configure the BIC as a module. There is a software component from seeburger called bicmapper which will allow you to
1. Define or import the inbound message metadefinition in various formats ( edifact, xml,...)
2. Using a mapping create an xml variant as the output metadefinition or edifact in the other direction.
3. Create a one to one mapping between input en output.
4. Export the metadata in xsd or sda format for import in XI
5. Generate an SDA which can be deployed in XI and used as a module.
Have a look here,
http://www.seeburger.com/fileadmin/com/pdf/SAP_Exchange_Infrastructure_Integratio_Strategy.pdf
Some Seeburger related information
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/e2aeb02c-0601-0010-d680-c9be61ffa390
Go through this threads:
http://www.seeburger.com/fileadmin/com/pdf/SAP_Exchange_Infrastructure_Integratio_Strategy.pdf
Need Material on Seeburger Adapters.
Seeburger Adapter
Installing seeburger adapter
http://www.seeburger.com/xi-adapters/
Thanks

OVD Adapter and ldif file

Similar Messages

Maybe you are looking for