Over usage with jetpack MiFi5510L

I have had this jetpack device for about a year now. I used to have a 4g broadband device that plugged into the usb port which quit working so verizon recommended the jetpack. At the time my date plan was 5GB allowance. Before I got this device I never would exceed the 5GB . When I got the jetpack I went over the 5GB right away. So I went up to the 10GB plan. With out doing anything differently than before why would my data usage go up just by changing to this new device. Since I changed to the 10 GB plan, I have gone over twice. I am the only user, I live by myself. I have read in many of the verizon forums that this overage problem is happening to more people than just myself. Anyone out there have any answers to what might be going on.
Rodney Schmidt

Sounds like your computer is downloading (or uploading) something in the background that you may not be aware of. Software updates take quite a bit.

Similar Messages

Over usage of my allowance by 67gb with no warning

i have just found out that i have a bill for £180.00 for over usage of my broadband. for the quarter it was 38gb one month then 67gb then 30gb over. because i hadnt checked my bank account to see this money coming out i had no idea. bt say they did warn me via an email that i was getting close but i had never received them. when i asked them where they were sending the email i hadnt heard of that address. i tried to log on to the address they gave me but it doesnt exist so how could they warn me. i have logged on to my account now with the email address that i chose when i set up the account so why were they not sending emails to that address. i am extremely unhappy with this service and will be taking it up with ofcom. i do not disagree with the overusage but if i had have been warned i could have upgraded my account the first time it happened and saved myself a fortune.
has this happened to anyone else and if so how did you resolve it.

amchimneys wrote:
i have just found out that i have a bill for £180.00 for over usage of my broadband. for the quarter it was 38gb one month then 67gb then 30gb over. because i hadnt checked my bank account to see this money coming out i had no idea. bt say they did warn me via an email that i was getting close but i had never received them. when i asked them where they were sending the email i hadnt heard of that address. i tried to log on to the address they gave me but it doesnt exist so how could they warn me. i have logged on to my account now with the email address that i chose when i set up the account so why were they not sending emails to that address. i am extremely unhappy with this service and will be taking it up with ofcom. i do not disagree with the overusage but if i had have been warned i could have upgraded my account the first time it happened and saved myself a fortune.
has this happened to anyone else and if so how did you resolve it.
Hi.
I find this rather weird, and certainly sounds wrong.
May I suggest you click on my shortcuts, and use option 12b. If it requests a login with a Yahoo! ID - enter your full email address you initially chose. The resultant screen will do one of two things. (a). It will either allow you to add sub accounts towards the bottom of the page - this means the account is a primary, or (b) it will actually tell you the email address of the primary account.
If (a), then hopefully a forum mod can sort out this problem as you will clearly have been given incorrect details on initial setup.
If (b), then again a forum mod should be able to get to the bottom of why you were not informed of the primary email address and login details.
I am actually surprised that BT told you the email address the warning emails were being sent - I assume that you gave them your security details, in which case could mean option (b) above is relevant.
You will probably not be able to login to the "other" email address as either it's not yours (my scenario 'a') or it will be a different password to your other account.
There are ways to tell if an account is active, rather than inaccessible.
Go to [https://login.yahoo.com/config/login?] and enter the email address you were given by BT and a password - if it comes back with "This ID is not yet taken", then the account doesn't exist. If is says "Invalid ID or password", then that typically means a wrong password, but the email address exists.
http://www.andyweb.co.uk/shortcuts
http://www.andyweb.co.uk/pictures

Huge data usage with Verison 4G LTE hotspot ( Verizon-890L-50DB)

Recently upgraded my internet service to a Verizon 4G LTE hotspot (Verizon-890L-50DB). First month - no problems - second month - I have 6GB of overage charges. Every time I log in to check email or any other minimal data usage task, I get hit with another GB or more of download usage. My computer is an HP Pavilion Laptop, Windows 7 with NETWORX installed. Networx tells me it is indeed MY computer that is downloading this data and my hard drive is also showing the increases in data.
I've run AVG, Glary Utilities, Speedy PC PRO and Spybot Search and Destroy but found no virus, rootkit or anything on my computer that would explain this problem.
When I use a different wireless internet service, I do NOT see the extraneous data usage.
I contacted Verizon's support team and got no help diagnosing the problem but they did agree to send a replacement for my hotspot device. Hopefully this fixes the issue; then I have to battle with them about the unwarranted $60 or more in overage charges.
Has anyone else experienced a problem similar to this?

I would recomend getting out of the contract before the 14 day trial period ends.   Verizon will charge you an activation fee, restocking fee and one months service, but that is better than being stuck with this mess. I have homefusion and am afraid to use since verizon seems to fabricate data usage. Unfortunately I did not realize this untill after the 14 day trial. Now is will cost me $350 to terminate my contract.
Date: Mon, 18 Feb 2013 21:21:48 -0700
From: [email protected]
To: <Email address removed for privacy.>
Subject: Re: Huge data usage with Verison 4G LTE hotspot ( Verizon-890L-50DB) - Re: Huge data usage with Verison 4G LTE hotspot ( Verizon-890L-50DB)
                                                                                Re: Huge data usage with Verison 4G LTE hotspot ( Verizon-890L-50DB)
    created by Lyda1 in Verizon Jetpack 4G LTE Mobile Hotspot 890L - View the full discussion
Exactly the same thing has happened to me. I purchased the Verizon Jetpack™ 4G LTE Mobile Hotspot 890L two days ago. After one day, I had supposedly used half the 5GB monthly allowance. After two days, I am at 4.25 GB usage. I don't stream movies, I have the hotspot password protected, I live alone, and no one else uses my computer. I have not downloaded any large files. At this rate, I'll go broke soon.
Reply to this message by replying to this email -or- go to the message on Verizon Wireless Community
Start a new discussion in Verizon Jetpack 4G LTE Mobile Hotspot 890L by email or at Verizon Wireless Community
© 2011 Verizon Wireless
Verizon Wireless | One Verizon Way | Mail Code: 180WVB | Basking Ridge, NJ 07920
We respect your privacy. Please review our privacy policy for more information.
                             Not interested in these emails anymore, or want to change how often they come? Update your email preferences.
Message was edited by: Verizon Moderator

Charged for broadband over usage but still below l...

Hi guys,i hope someone here can help because i'm getting nowhere with bt helplines. At the end of january this year i changed from bt total broadband 1 to infinity. My old broadband limit was 10gb but i usually went over by 2 or 3 gb which i was obviously charged for, no problem there. With my new infinity package my allowance was increased to 20gb per month which was plenty enough for me.however,mybt usage monitor is still showing me to be on the old 10gb package.
Despite several live chat sessions and phone calls(the last one 2 weeks ago informing me i had 40gb usage) i'm still being charged for going over my 10gb allowance.i've even sent them,as requested , a screen shot of my usage monitor!! Why on earth would i have to do that? My latest bill arrived this morning with charges added for over usage.
Can someone please advise me of how to sort this problem out. To make things worse i'm now going to the dentist!
Thanks in advance,
Cheesed-off (paul)

Hi Cheesed-off,
Welcome to the community forum. I would like to take a look at your account. Please send me in your details using the "Contact The Mods" link found in my profile.
Thanks
PaddyB
BTCare Community Mod
If we have asked you to email us with your details, please make sure you are logged in to the forum, otherwise you will not be able to see our ‘Contact Us’ link within our profiles.
We are sorry but we are unable to deal with service/account queries via the private message(PM) function so please don't PM your account info, we need to deal with this via our email account :-)

Waiver on over usage on bb option 1

i'm new to computers and broadband. didnt know there was a limit of 10GB on option 1 that i have, or i wouldnt of let my daughter watch all them movies, iplayer, youtube, etc. ended up with £50 cost on top of my bill. i only just managed to sort out an email address and register with my BT. it took me a long week to do this after the bill landed on my doormat. i'm running out of time on the bill and i cant afford the over use charge at the moment cos £50 lot of money to me the way things are. this has proper stressed me out as i just come out of hospital overcome a serious condiition on icu. i'm gonna put one of those warning things on so it will tell me if it goes over the 10Gb again.
anyway i read up on broadband usage and it says that if you go over on your first bill the overusage can be waivered, but how do i go about this. the operators cant speak english proper so they cant understand me or i them. so can someone from BT pleaase give me a phone number, not to indian operator or machine, or a link for the waiver please. thank you. please reply asap
yours M
To the end of time and things...
Solved!
Go to Solution.

chrisbamb said:"This is the passage under the "What if I go over my Allowance" Section:
If you do go over your monthly usage allowance then you may be subject to additional usage charges as outlined in our Broadband Usage Policy. In certain situations charges may not be applied. If it is the first month that the allowance is exceeded, we will waive the charge and send you an email confirming the amount of additional usage and notifying you that any further over-use in subsequent months will be charged. All charges will be added to your next bill.
Unfortunately though the charges will be returned on your next Bill not taken off this one. You will still need to pay this Bill and then receive a credit on your next Bill. I would also look at what mediums your daughter is using to "download" films. Is she using UTorent or Vuze or some other type of torenting or is she streaming?
As advised above, if your daughter is going to be using that much internet I would upgrade to the unlimited package otherwise expect lots of charges in the future as 10GB's goes nowhere when you are downloading or straming."
this has been very useful. i did do a search on this forum referring to waiver but to no avail so here i am.
i will pay the bill anyhow altho i will ask for a delay on paying it as to give me time to get my next pension. i just hope that the £50 will be credited to my next bill, otherwise if the charges go onto my next bill its hardly a waiver as such if i dont get the credit. the bill i got is my first broadband bill but not my first phone bill. i didnt get an email because i only set up a email the last few days. i hope this isnt a necessary requirement to qualify for the waiver. but this is why i didnt know about the over usage.
my daughter has put movies on my pc disc, but she also watching youtube, channel 4, and bbc player altho i have stopped her from doing this untill i sort out what the 75Gb over usage is defined. i get answer to one question but then it opens new cans of worms as this is all new to me so i am learning the hard way as i go along.
thank you
m b
To the end of time and things...

How write rmi-iiop over ssl with weblogic server 6.1 - No server found

//New
Hello,
I have written an appication like this:
- An EJB server running on Weblogic server 6.1
(named: BankServerHome)
-A java client calling the BankServer.
Platform: windows 2000 - jdk1.3
Now I want to secure the communication with SSL protocol.
I have done this:
-generate a key peer with weblogic service named certificate.
-send the CSR to a CA and place the answer into the weblogic
server certificate directory.
-update path for ServerCertificateChainFileName,
ServerCertificateFileName, ServerKeyFileName into config.xml.
-launch weblogicServer
     -> server certificate is recognized
     -> listening port 7001 and 7002.
(-stop weblogicServer!)
At now, all is all right, errors come hereafter:
Then I follow the guideline "Programming weblogic Security" (version of 30/07/2001).
"To use RMI over IIOP over SSL with a Java client, do the following:
2. Extend the java.rmi.server.RMISocketFactory class to handle SSL socket
connections. Be sure to specify the port on which WebLogic Server listens for
SSL connections. For an example of a class that extends the
java.rmi.server.RMISocketFactory class, see Listing 4-22.
3. Run the ejbc compiler with the -d option.
4. Add your extension of the java.rmi.server.RMISocketFactory class to the
CLASSPATH of the Java client.
5. Use the following command options when starting the Java client:
-xbootclasspath/a:%CLASSPATH%
-Dorg.omg.CORBA.ORBSocketFactoryClass=implementation of java.rmi.server.RMISocketFactory
-Dssl.certs=directory location of digital certificate for Java client
-Dssl.key=directory location of private key for Java client"
At step 3. I found into documentation that -d is linked to a directory name.
When I run ejbc with this option -d I have the message:
"ERROR: You must specify an output directory or jar with the -d option to weblogic.ejbc."
% So what option can I use to run ejbc for secure usage?
At step 5. Whatever I write for -Dorg.omg.CORBA.ORBSocketFactoryClass,
this pointed class is not instanciated.
Then I can not create a socket with my client.
The folowing exception is raised:
javax.naming.CommunicationException [Root exception is java.net.ConnectException:
No server found at T3S://localhost:7002]
So, my questions are:
% Why -Dorg.omg.CORBA.ORBSocketFactoryClass must be known by the client and not
the server?
My java client part, managing connection is:
-------------------BEGIN OF CONNECTION MANAGER-------------------
Properties env = new Properties ();
// Shouldn't have to do this, but for now you must
if ( factory.equals ("weblogic.jndi.WLInitialContextFactory") ) {
env.put ("java.naming.provider.url", "t3s://localhost:7002");
InitialContext context = new InitialContext (env);
BankSessionServerHome bssh = (BankServerHome) context.lookup("BankServerHome");
BankServer = bssh.create();
-------------------END OF CONNECTION MANAGER-------------------
I have also try
env.put ("java.naming.provider.url", "corbaloc:iiop://localhost:7002");
but it throws the following error
javax.naming.InvalidNameException: url does not conatin !!!
% What is the code for the java client allowing connection with the ejb?
% And better, can I have a sample example for rmi-iiop over ssl?
(...wlserver6.1\samples\examples\iiop\ejb\stateless\rmiclient\client.java do not
speak ssl!)
Any help will be appreciate from you...
Best Regards.
Oliver

"oliver" <[email protected]> writes:
The SSL support is poorly doc'd right now. We have fixed this and
updated the way you do things in SP2. Please either wait for SP2 or
contact support.
andy
I have written an appication like this:
- An EJB server running on Weblogic server 6.1
(named: BankServerHome)
-A java client calling the BankServer.
Platform: windows 2000 - jdk1.3
Now I want to secure the communication with SSL protocol.
I have done this:
-generate a key peer with weblogic service named certificate.
-send the CSR to a CA and place the answer into the weblogic
server certificate directory.
-update path for ServerCertificateChainFileName,
ServerCertificateFileName, ServerKeyFileName into config.xml.
-launch weblogicServer
     -> server certificate is recognized
     -> listening port 7001 and 7002.
(-stop weblogicServer!)
At now, all is all right, errors come hereafter:
Then I follow the guideline "Programming weblogic Security" (version of 30/07/2001).
"To use RMI over IIOP over SSL with a Java client, do the following:
2. Extend the java.rmi.server.RMISocketFactory class to handle SSL socket
connections. Be sure to specify the port on which WebLogic Server listens for
SSL connections. For an example of a class that extends the
java.rmi.server.RMISocketFactory class, see Listing 4-22.
3. Run the ejbc compiler with the -d option.
4. Add your extension of the java.rmi.server.RMISocketFactory class to the
CLASSPATH of the Java client.
5. Use the following command options when starting the Java client:
-xbootclasspath/a:%CLASSPATH%
-Dorg.omg.CORBA.ORBSocketFactoryClass=implementation of java.rmi.server.RMISocketFactory
-Dssl.certs=directory location of digital certificate for Java client
-Dssl.key=directory location of private key for Java client"
At step 3. I found into documentation that -d is linked to a directory name.
When I run ejbc with this option -d I have the message:
"ERROR: You must specify an output directory or jar with the -d option to weblogic.ejbc."
% So what option can I use to run ejbc for secure usage?
At step 5. Whatever I write for -Dorg.omg.CORBA.ORBSocketFactoryClass,
this pointed class is not instanciated.
Then I can not create a socket with my client.
The folowing exception is raised:
javax.naming.CommunicationException [Root exception is java.net.ConnectException:
No server found at T3S://localhost:7002]
So, my questions are:
% Why -Dorg.omg.CORBA.ORBSocketFactoryClass must be known by the client and not
the server?
My java client part, managing connection is:
-------------------BEGIN OF CONNECTION MANAGER-------------------
Properties env = new Properties ();
// Shouldn't have to do this, but for now you must
if ( factory.equals ("weblogic.jndi.WLInitialContextFactory") ) {
env.put ("java.naming.provider.url", "t3s://localhost:7002");
InitialContext context = new InitialContext (env);
BankSessionServerHome bssh = (BankServerHome) context.lookup("BankServerHome");
BankServer = bssh.create();
-------------------END OF CONNECTION MANAGER-------------------
I have also try
env.put ("java.naming.provider.url", "corbaloc:iiop://localhost:7002");
but it throws the following error
javax.naming.InvalidNameException: url does not conatin !!!
% What is the code for the java client allowing connection with the ejb?
% And better, can I have a sample example for rmi-iiop over ssl?
(...wlserver6.1\samples\examples\iiop\ejb\stateless\rmiclient\client.java do not
speak ssl!)
Any help will be appreciate from you...
Best Regards.
Oliver

How write rmi-iiop over ssl with weblogic server 6.1?

Hello,
I have written an appication like this:
- An EJB server running on Weblogic server 6.1
(named: BankServerHome)
-A java client calling the BankServer.
Platform: windows 2000 - jdk1.4
Now I want to secure the communication with SSL protocol.
I have done this:
-generate a key peer with weblogic service named certificate.
-send the CSR to a CA and place the answer into the weblogic
server certificate directory.
-update path for ServerCertificateChainFileName,
ServerCertificateFileName, ServerKeyFileName into config.xml.
-launch weblogicServer
     -> server certificate is recognized
     -> listening port 7001 and 7002.
(-stop weblogicServer!)
At now, all is all right, errors come hereafter:
Then I follow the guideline "Programming weblogic Security" (version of 30/07/2001).
"To use RMI over IIOP over SSL with a Java client, do the following:
2. Extend the java.rmi.server.RMISocketFactory class to handle SSL socket
connections. Be sure to specify the port on which WebLogic Server listens for
SSL connections. For an example of a class that extends the
java.rmi.server.RMISocketFactory class, see Listing 4-22.
3. Run the ejbc compiler with the -d option.
4. Add your extension of the java.rmi.server.RMISocketFactory class to the
CLASSPATH of the Java client.
5. Use the following command options when starting the Java client:
-xbootclasspath/a:%CLASSPATH%
-Dorg.omg.CORBA.ORBSocketFactoryClass=implementation of java.rmi.server.RMISocketFactory
-Dssl.certs=directory location of digital certificate for Java client
-Dssl.key=directory location of private key for Java client"
At step 3. I found into documentation that -d is linked to a directory name.
When I run ejbc with this option -d I have the message:
"ERROR: You must specify an output directory or jar with the -d option to weblogic.ejbc."
% So what option can I use to run ejbc for secure usage?
At step 5. Whatever I write for -Dorg.omg.CORBA.ORBSocketFactoryClass,
this pointed class is not instanciated.
Then I can not create a socket with my client.
The folowing exception is raised:
javax.naming.CommunicationException [Root exception is java.net.ConnectException:
No server found at T3S://localhost:7002]
So, my questions are:
% Why -Dorg.omg.CORBA.ORBSocketFactoryClass must be known by the client and not
the server?
My java client part, managing connection is:
-------------------BEGIN OF CONNECTION MANAGER-------------------
Properties env = new Properties ();
// Shouldn't have to do this, but for now you must
if ( factory.equals ("weblogic.jndi.WLInitialContextFactory") ) {
env.put ("java.naming.provider.url", "t3s://localhost:7002");
} else {
env.put ("java.naming.provider.url", "rmi://localhost:7002");
InitialContext context = new InitialContext (env);
BankSessionServerHome bssh = (BankServerHome) context.lookup("BankServerHome");
BankServer = bssh.create();
-------------------END OF CONNECTION MANAGER-------------------
% What is the code for the java client allowing connection with the ejb?
% And better, can I have a sample example for rmi-iiop over ssl?
(...wlserver6.1\samples\examples\iiop\ejb\stateless\rmiclient\client.java do not
speak ssl!)
Any help will be appreciate from you...
Best Regards.
Oliver

"oliver" <[email protected]> writes:
First off 1.4 isn't supported as yet. That is probably part of the problem.
You also must use a corba URL from the client in order for this to work for instance:
If you are using WLInitialContextFactory:
corbaloc:iiop:localhost:7001/NameService
If you are using CNCtxFactory:
iiop://localhost:7001
Using rmi: is the wrong thing to do - that will use jrmp or t3.
However, I suggest that you raise a call with support since there is
some other trickiness with getting SSL working. We hope to have this
much improved in SP2.
andy
Hello,
I have written an appication like this:
- An EJB server running on Weblogic server 6.1
(named: BankServerHome)
-A java client calling the BankServer.
Platform: windows 2000 - jdk1.4
Now I want to secure the communication with SSL protocol.
I have done this:
-generate a key peer with weblogic service named certificate.
-send the CSR to a CA and place the answer into the weblogic
server certificate directory.
-update path for ServerCertificateChainFileName,
ServerCertificateFileName, ServerKeyFileName into config.xml.
-launch weblogicServer
     -> server certificate is recognized
     -> listening port 7001 and 7002.
(-stop weblogicServer!)
At now, all is all right, errors come hereafter:
Then I follow the guideline "Programming weblogic Security" (version of 30/07/2001).
"To use RMI over IIOP over SSL with a Java client, do the following:
2. Extend the java.rmi.server.RMISocketFactory class to handle SSL socket
connections. Be sure to specify the port on which WebLogic Server listens for
SSL connections. For an example of a class that extends the
java.rmi.server.RMISocketFactory class, see Listing 4-22.
3. Run the ejbc compiler with the -d option.
4. Add your extension of the java.rmi.server.RMISocketFactory class to the
CLASSPATH of the Java client.
5. Use the following command options when starting the Java client:
-xbootclasspath/a:%CLASSPATH%
-Dorg.omg.CORBA.ORBSocketFactoryClass=implementation of java.rmi.server.RMISocketFactory
-Dssl.certs=directory location of digital certificate for Java client
-Dssl.key=directory location of private key for Java client"
At step 3. I found into documentation that -d is linked to a directory name.
When I run ejbc with this option -d I have the message:
"ERROR: You must specify an output directory or jar with the -d option to weblogic.ejbc."
% So what option can I use to run ejbc for secure usage?
At step 5. Whatever I write for -Dorg.omg.CORBA.ORBSocketFactoryClass,
this pointed class is not instanciated.
Then I can not create a socket with my client.
The folowing exception is raised:
javax.naming.CommunicationException [Root exception is java.net.ConnectException:
No server found at T3S://localhost:7002]
So, my questions are:
% Why -Dorg.omg.CORBA.ORBSocketFactoryClass must be known by the client and not
the server?
My java client part, managing connection is:
-------------------BEGIN OF CONNECTION MANAGER-------------------
Properties env = new Properties ();
// Shouldn't have to do this, but for now you must
if ( factory.equals ("weblogic.jndi.WLInitialContextFactory") ) {
env.put ("java.naming.provider.url", "t3s://localhost:7002");
} else {
env.put ("java.naming.provider.url", "rmi://localhost:7002");
InitialContext context = new InitialContext (env);
BankSessionServerHome bssh = (BankServerHome) context.lookup("BankServerHome");
BankServer = bssh.create();
-------------------END OF CONNECTION MANAGER-------------------
% What is the code for the java client allowing connection with the ejb?
% And better, can I have a sample example for rmi-iiop over ssl?
(...wlserver6.1\samples\examples\iiop\ejb\stateless\rmiclient\client.java do not
speak ssl!)
Any help will be appreciate from you...
Best Regards.
Oliver

FUP Charge but not over usage limit

Hi,
I received an email today informing i have 'spent more than £10 on my account since my last bill' so i decided to check what the hell was going on as i have no idea what this could be.
So i look at my phone charges and they are worth £4.24, i thne checked my broadband usage monitor and its not over the 40gb limit, its under half way. However on my account it says there is a £20 FUP charge for 20gb!
How can there be a £20 charge this month when i havent gone over, i paid last months bill in full so can someone please tell me whats going on?
The last time a warning about usage was sent out it was on the 22/3/13 and informed me of a charge that was paid on a previous bill, so why is there a FUP charge now for 20gb shortly after i paid my bill when i have not gone over my usage limit since?

NoX81 wrote:
Current usage is irrelevant? Then what is the point of it?
Im basing this off of billing cycle dates that i've paid for and what i've used since.
Ok my previous billing cycle runs from 19/2 to the 18/3 - i paid the bill for that period on the 19/3
My billing area says: usage since March 19th (the date i payed my last bill) £24.24 (£20 of it is a FUP charge)
Yet with thre FUP charge it says:
All usage from 01 Mar 13 to 12 Apr 13: £20.000
I paid a bill that covered up to the 18/3 and since then have not gone over usage so why is there a charge for fair usage now?
I'll contact support but if anyone has a good reason for this i'd like to hear it.
the current usage is irrelevant for the current charge a usage is calendar months so from 1st April whereas the charge you have incurred will related to the last usage period which ended on 31 March
usage is calendar months but your billing period is as you have said totally different
If you like a post, or want to say thanks for a helpful answer, please click on the Ratings star on the left-hand side of the post.
If someone answers your question correctly please let other members know by clicking on ’Mark as Accepted Solution’.

Z10 - High CPU and Battery Usage with BBM

I recently updated my Z10 (UK and EE Carrier) to 10.2.1.3062 and every day or so I am getting very high CPU and Battery Usage with BBM running in the background.
I have never used BBM and have no active or past conversations or contacts.
This morning, it used around 60% battery in under 3 hours, with 95% of that time sat at 'idle' in my pocket.
Sometimes its after I have connected it to my car stereo (charging and streaming music via USB) on an Alpine CDA-117Ri, but I dont think thats a cause.
Some screen grabs:
[URL=http://s46.photobucket.com/user/hoopsontoast/media/IMG_20150126_095930_zpsj3haccgs.png.html][IMG]htt...
[URL=http://s46.photobucket.com/user/hoopsontoast/media/IMG_20150124_230003_zpshi2dpkfo.png.html][IMG]htt...

You're not alone.
Please read this post here: http://supportforums.blackberry.com/t5/BBM-for-BlackBerry/BBM-is-draining-my-Battery/m-p/3039915#M52...
and contact BBM support as suggested to send logs. BBM Support is working to determine the cause of this.
Please post over in that thread so we can keep all related in one place.
1. If any post helps you please click the below the post(s) that helped you.
2. Please resolve your thread by marking the post "Solution?" which solved it for you!
3. Install free BlackBerry Protect today for backups of contacts and data.
4. Guide to Unlocking your BlackBerry & Unlock Codes
Join our BBM Channels (Beta)
BlackBerry Support Forums Channel
PIN: C0001B7B4 Display/Scan Bar Code
Knowledge Base Updates
PIN: C0005A9AA Display/Scan Bar Code

Comparing the BOM usage with the actual usage for materials.

Hi All
My client want to compare the BOM usage with the actual usage and have a report for this within a period? More specified they want to calculate the BOM usage, based on the requirement quantity from confirmation - but with out the scrap %. mulitplied with the confimed quantity of the header material.
The actual usage should be based on goods issuing from stock, either as goods issue to order (backflushing) or as goods issue to cost center.
I havent been able to indentiy a standard report for doing this - does some of you know a standard report?
- I was thinking of the following method:
Look at tabel RESB and compare it with MSEG, but I have some diferent problems with this.
- In resb there is no qty before scrap.
- The data amount from MSEG, is so huge so it is not possible to make a data search for a whole period (eg. month)
Br. M

There is one std report MCRX which gives a comparison of quanity in order and actual consumption,
if it doesnt meet your need, you may have to create a custom report.
logic can be find the quantites as per BOM for the produced quantities
issued quantities to the order
tables you may need are AUFK AUFM
AFKO, STAS STPO
MSEG, MKPO
JEST ( if you want to filter using order status)

I accidentally quit my CC on my Macbook pro and now the cloud icon is grayed out and every time I hover over it with the mouse I get the spinning beach ball of death on the icon. I have no idea how to open it because when I use spotlight search to open it

I accidentally quit my CC on my Macbook pro and now the cloud icon is grayed out and every time I hover over it with the mouse I get the spinning beach ball of death on the icon. I have no idea how to open it because when I use spotlight search to open it it gives me a message saying "Creative Cloud is not open anymore" help!

Since you didn't include any pertinent info such as the Mac model and OS version you are running, here is some general information:
Mac OS X: Gray screen appears during startup
Depending on which OS yours came with originally - and which OS you are now running - you would either need your original install disks - you can call Apple for replacements by giving them your serial number. Or you may be able to reinstall the OS by using recovery (again, depends on which model/which OS).

Can i text international from one iphone to another iphone over wifi with other friends who will be with us overseas?

can i text international from one iphone to another iphone over wifi with other friends that have iPhones
who will be with us overseas?

Yes, if you are provisioned by your carrier to do so. IF both phones are iphones with IOS 5.0 or higher then you can use imessage.

Hello, i have updated my iphone 5 black 16 gb to ios 7 ios 7.0.2 (11a501) and my battery has become worse it gives 9 hours of usage with out doing anything, i have done everything i tried, not using my iphone as well but still no change at all!

hello, i have updated my iphone 5 black 16 gb to ios 7.0.2 (11a501) and my battery life of my iphone has become worse it gives 9 hours of usage with out doing anything, i have done everything every tip that is available online i had 3gs and 4s so i know how to save battry life,i even tried not using my iphone as well but still no change at all!. i have upadted to ios 7.0.3 then downgraded it , i thought battery may be an issue ,so i put brand new battery still no change , so what should i do ? , update to the latest version which is ios 7.0.4 or wait for the ios 7.1 , i was using iphone 4s running on ios 6.1 it gave me 3 days of battery timing , iphone 5 seemed to be very bad for me ,help ! ?
its facory unlocked btw

Try to do a reset, if it doesn't work try remove recently added apps this may solve your problem ( like google app because it has happened with me)
Take a look at apps using your location service in privacy, it can cause battery draining.

Airtune Over Ethernet with Time Capsule or Airport Extreme

Can the previous generation Time Capsule or Airport Extreme bridge an ethernet client to an Airtunes network?
Current Setup: I have an aluminum iMac wired to my Time Capsule; currently, I use the aluminum as a music server by connecting to several Airport Express clients over the the iMac's built-in Airport for Airtunes support.
Problem: I have 3-802.11g clients dragging my wifi network. I would like to dedicate the iMac's internal network to the g-clients so I don't have to use compatibility mode for my n-network. However, I will lose Airtunes speaker support when I use internet sharing over the built-in Airport. Airtunes does not appear to support the Time Capsule ethernet client.
Nodes:
-AE 802.11g (Airtunes only)
-AE 802.11n (Airtunes and USB printer)
-1st gen Time Capsule (Internet gateway, "creating network" 802.11 g/n,
-iMac 8,1 (Music server via internal wifi, wired TC client)
-Macbook 4,1 (wifi client)
-iPhone
-Canon MP620 (USB to iMac, wifi to Macbook)

Further to Bob's comments..
A Gen1 TC will be using marvel wireless chip and your 2008 and 2010 Macbook will use atheros and/or broadcom cards.. Just open your system profiler and look for info on the airport. We find the mixture of wireless chipsets especially older draft N and later N products can give very varied results.
The very fact you are linking at 270 and not 300mbps shows some reduction from theoretical max speed.. and really to get over 100mbps with any wireless you need perfect setup.. matched wireless chips etc.
Do a test uploading and downloading a file to the TC to see if the LAN speed is better than internet speed.
In reality I think you are doing especially well.. we see loads of people complaining about slow internet here who are getting less than 10% of the speed they get direct when routed through the TC. And on most occasions the limit in speed is not really going to affect what you do, as the real links to the internet are not that fast.

Database link from Oracle 11g (64 bit) to MySQL over UnixODBC with dg4odbc

Hello,
I want to connect to a MySQL Database from Oracle over a database link, but i get always the Error Message ORA-28528: Heterogeneous Services datatype conversion error .
In the forum or internet I can't find a solution for my problem, so I try now to post this problem.
Here a detailed description of the problem:
I use a Oracle 11.1.0.7.0 64bit database which is running on a redhat linux 5.3 64bit.
I want to connect to a MySql Database 5.0, which is running on a redhat linux 5.2 32bit over unixODBC.
The configuration from the ODBC seems to be good, because with isql on the ora server I can connect and query all data correct from the MySQL database.
Also the tsnnames.ora and listener.ora should be configured correctly. The tnsping works also fine.
But when i try to catch the data over SQLPlus with the database link I always get the error ORA-28528.
If I try to select just one column it works, but the returned data are incomplete or truncated.
the version of my libs:
between mysql and odbc I use libmyodbc3.so version 3.51.12-2.2 (I also tried the version 5, but with them I get a segmentation fault error on isql).
between odbc and dg4odbc I use libodbc.so version 2.2.11-7.1
Has anybody a solution or hint for me?
Many Thanks in advance,
best regards from Austria
Manuel
Edited by: user11243186 on 09.06.2009 02:59

kdgmanu wrote:
Hello,
I always get the error ORA-28528.
If I try to select just one column it works, but the returned data are incomplete or truncated.
maybe you are facing bug 6772397, so do a search on metalink for bug 6772397
>
Has anybody a solution or hint for me?you could also see the following notes 554409.1 and 603801.1
Many Thanks in advance,
best regards from Austriacheers from Zagreb

Over usage with jetpack MiFi5510L

Similar Messages

Maybe you are looking for