Overflow in the operation COLLECT

Dear all,
We have implemented BI7.00 and have used data source "0EC_PCA_1" which loads data to the cube "0PCA_C01".
In one of our load from the PSA to the cube there were 14 lacs record which failed during the load to the target. The error message is as mentioned below.
"Overflow in the operation COLLECT - Message no. RS_EXCEPTION000".
Due to this error message, all the subsequent loads to the Target have not happened (due to request red in the cube).
Can anyone kindly mention the steps to correct the same and load the data to the target.
On analysing the error message, it pointed out to the start routine - this routine is also SAP standard - as per the OSS note 577644.
We tried to load the request again manually through the DTP but it throws the same error message and subsequent loads have not taken place to the target.
Experts suggestion and help required.
Regards,
M.M

Dear Mr. Balaji,
Thank you for the immediate response. Can you kindly explain about the first option i.e., "break the selection condition and load again".
The second option mentioned by you had been tried already and it doesn't work. I had reduced the size in DTP from 50,000 to 5 and also tried by increasing upto 99999 - but the same error is thrown.
Can you help me.
Regards,
M.M

Similar Messages

  • Overflow in the operation:= error

    Hi,
         I get the following error in my DTP of a process chain:
    Runtime error while executing rule -> see long text
    Diagnosis
    An error occurred while executing the transformation rule:
    The actual error message:
    Overflow in the operation :=
    The error was triggered at the following program location:
    System Response
    Processing of this data record was cancelled
    This issue seems to be because of the length of the target field being lesser than the source field.
    Can you please let me know how this issue can be resolved since the DTP is added in a process chain?
    Thanks in advance.

    Hi,
    As long as without knowing exact infoobject not easy to suggest direct solution.
    Assuming as your loading data from PSA to Cube.
    Go to your transformations, Menu Extras--> tabular overview, compare each source and target object length, need to be the same.
    if any target object length is lesser than source field , that length need to increased.
    Thanks

  • How can I get my money back I BUY the  Coins in the game fieldrunners 2 HD were cut $ 9.99 $ from my account and did not receive any coins?! No. process MHFQZV02X8 please  cancel the operation, collected coins and thank you

    How can I get my money back I BUY the  Coins in the game fieldrunners 2 HD were cut $ 9.99 $ from my account and did not receive any coins?! No. process MHFQZV02X8 please  cancel the operation, collected coins and thank you

    Apple does not have a presence here, this is a user to user forum. You would probably have more success contacting iTunes Support at http://apple.com/support/itunes/contact/.

  • Overflow during the arithmetical operation (type P) in program "SAPLHRPT

    Hi,
    I am currently facing an issue in payroll posting to accounting in international payroll.A run time error "Overflow during the arithmetical operation (type P) in program "SAPLHRPT" occurs. By reducing the amounts on the balance sheet side payroll posting document is created.

    Hi Asad,
    Does you guys enhancemented this program? I think if it`s standard code, it should give you a error message inform you "amount is too large" or something.
    So double click this dump log, to check whether it is a custom code, if yes, to add "TRY CATCH" and give out a message.
    regards,
    Archer

  • Overflow during the arithmetical operation (type P) in program "SAPLV61A

    hi,
        I am getting this error in VA01(sales order)
    Runtime error              Compute_bcd_overflow
    Except                       Cx_sy_arithmetic_overflow.
    Overflow during the arithmetical operation (type P) in program "SAPLV61A
    Error in particular line is.
    1388           ADD  xkomv-kwert  TO komp-mwsbp.
    Please give me the solution with detail decsription.How to solve with step by step.

    Hi,
    Instead of directly assigning the value to xkomv-kbetr. Store the value in a temporary variable of type p length 13 decimals 2 . Multiply by 10^n to get the correct result.
    Then assign the temp value to xkomv-kbetr.
    Sample Code
    DATA : lv_temp TYPE P length 13 decimals 2.
    lv_temp = ( xkwert * 10^n ) / komp-mgame. 
    Then assign lv_temp to xkomv-kbetr.
    To get proper value, you have to multiply or divide by 10^n .
    Regards,
    DPM

  • Overflow during the arithmetical operation (type P) in program SAPLBBP_FRA

    Hi All
    I am receieving the following error the moment I log onto the SRM system via the browser.
    Overflow during the arithmetical operation (type P) in program SAPLBBP_FRAMEWORK
    Please can you advise what could possibly the problem.
    Thanks in Advance
    Regards
    KC

    Hi
    <b>Please go through this SAP OSS Note which will definitely help -></b>
    Note 857137 - MENUDATA: A "short dump" occurs with several role assignment
    <u>Do let me know.</u>
    Regards
    - Atul

  • Error while doing MIRO-Overflow for arithmetical operation (type P) in prog

    Hi ,
    I am getting the error while doing the MIRO  as below-
    Runtime Errors         COMPUTE_BCD_OVERFLOW
    Exception              CX_SY_ARITHMETIC_OVERFLOW
    Date and Time          20.05.2009 10:07:03
    Short text
         Overflow during the arithmetical operation (type P) in program "SAPLMRMC".
    What happened?
         Error in the ABAP Application Program
         The current ABAP program "SAPLMRMC" had to be terminated because it has
         come across a statement that unfortunately cannot be executed.
    What can you do?
         Note down which actions and inputs caused the error.
         To process the problem further, contact you SAP system
         administrator.
         Using Transaction ST22 for ABAP Dump Analysis, you can look
         at and manage termination messages, and you can also
         keep them for a long time.
    Error analysis
         An exception occurred that is explained in detail below.
         The exception, which is assigned to class 'CX_SY_ARITHMETIC_OVERFLOW', was not
          caught in
         procedure "MRM_AMOUNT_QUANTITY_PROPOSE" "(FUNCTION)", nor was it propagated by
          a RAISING clause.
         Since the caller of the procedure could not have anticipated that the
    Please let me know how can this be removed.

    Hi,
    There can be some problem with tolerances set in the customizing.
    In my case, I was getting this error because of delivery date variance. The difference between delivery date maintained in PO and invoice date was huge and hence the multiplication of price of PO and difference  of delivery date was huge and that was the reason for error.
    Similarly in your case also, there will be some tolerance limit problem.
    Please check your tolerance limits set in customizing.
    Regards,
    Mihir Popat

  • Overflow for arithmetical operation (type P) in program.

    Hi experts..
    I had developed a report for showing total receipt and issues and confirmed issue.
    of PQ.
    For all the plant is running fine but only for one plant 2050 its going into dump and error is "Overflow for arithmetical operation (type P) in program." and the code line is
    T_EKET-MNG02 = T_EKET-MNG02 * ( t_mdbs-umrez / t_mdbs-umren ).
    MNG02 IS OF TYPE  Data : "Quan", length =13 , decimal = 3.
    initially : value in Mng02 is =  10       and ratio is 11/8 = 1.375
                  and in the debugging the value is   10*1.375 = 13.75
    but... when i am executing it .. its going into dump and after again checking the MNG02 is showing valude --9765133613.881  and the above error.
    what should i do....
    please help..
    i will award the points for every help...
    thanks

    Hi,
    Are you doing any other calculation for field MNG02 in your program?
    I created a small program with the field and values you have mentioned and it gave me the result 13.75 and no short dump.
    Please check following things:
    When short dump occurs, it shows at which line it has occured. Is it showing that the shortdump has occurs on the line you are talking about here or it is somewhere else.
    Also, when shortdump occurs, it shows a "debugging" button at the top. Hit that button and it will show you exactly where the short dump has occured. What ever this statement is, check what are the values of different variables here.
    Check all these and you might get the answer. Let me know if you still have problem.
    Regards,
    RS

  • This field contains duplicate values. Remove all duplicate values and try the operation again.

    Greetings Everyone,
    I am getting the follow up errors: "This field contains duplicate values. Remove all duplicate values and try the operation again."
    when I tried to make the field "Claim Number" from the list in site collection library. See the screen below:
    1- I selected on the "List" and I clicked on the list name
    "Claim Tracking Report"
    2- After I clicked on the list name then I went to the ribbon and selected list setting to choose Enforce Unique for the Field Column
    "Claim Number"
    3- Then I went down and selected
    "Yes" to Enforced the Unique for the Field Column "Claim Number".
    4- Then after I clicked "Yes" I got the error
    "Sorry, something went wrong. This field contains duplicate values. Remove all duplicate values and try the operation again."  But I don't have any duplicates values Items, because I had them removed before I tried
    to Enforce the field column values to Unique. Can someone help or provide me a suggestions on how I can solve this issue please. Thank you
    FYI: I am using a Nintex Workflow

    Hope this is a list, how many total items are there?
    Please try to open this list as access(link in IE) and run this query in access
    SELECT Claim.[Claim Number], Count(*) AS Expr1
    FROM Claim
    GROUP BY Claim.[Claim Number]
    HAVING (((Count(*))>1));
    Hope it will show something! if this does not show you dups then better to create a separate list and migrate items after configuring unique column.
    Please 'propose as answer' if it helped you, also 'vote helpful' if you like this reply.

  • Granting access to SharePoint Designer on a SubSite but not the Site Collection

    Is it safe in SharePoint 2010 to give a user the ability to use SharePoint Designer on a SubSite of a Site Collection and not give them permission, other than Visitor access, to the root Site Collection (Parent Site collection)?
    Most importantly, I want to make sure the only damage a user can do is to their own subsite, and not do anything that will impact the Site Collection. 
    I created a test user and granted it FULL access on a test subsite and only view on the parent site collection and was able to use designer logged in as the test user.  I was able to modify the subsite pages and create workflow.  I was not expecting
    this to work based on the following statement in KB article
    http://support.microsoft.com/kb/2592376
    Overall, an user needs to be a member of one of the following groups at the site collection
    level to be able to use SharePoint Designer and modify SharePoint content:
    - Site Collection Administrators
    - Designers
    - Owners
    Does anyone have any advice on this?
    Thanks!

    I think I just found out why in SharePoint 2010 I'm able to give a user "Designer" permissions on a subsite and "Read"  only permission on the parent Site Collection root site and they can still use SharePoint Designer with
    no permission issues in the subsite.
    http://suehernandez.wordpress.com/2013/02/15/sharepoint-designer-2010-you-do-not-have-permission-to-do-this-operation/
    From the Article: "Turns out the reason for these varying behaviors is this:  In 2007, new sites would automatically inherit their
    master pages from their parents.  If you made no changes to that, it inherited right up to the top.  So it’s looking at the master page from the top, in those circumstances.  And as we’ve seen here, if you don’t have Design permissions to it,
    it doesn’t work.
    In the case of a new 2010 site (just a regular Team Site), the new 2010 behavior is to use the Master Page in the gallery it has in its own site.  And since the user is an Administrator (Full Control) of that
    site, then no problem getting to the Master Page!"
    Does anyone have any experience with this?

  • Document ID moving across the site collection

    Thanks for reading, let me explain my scenario before my question
    1. we have huge site collection with full of documents
    2. want to enable document id feature to track of documents
    3. we want to run the process to archive docs which are older than 6 months into different site collection.
    4. after 2 years, we will have 4 archived site collections, documents are spread across the various site collection
    Does document id move across the site collections, still users can get old document using initially assigned document id after archive into different site collection?
    I read some documentation on document iD that it is targeted for Site Collection level.
    S.Venkata Appaji

    Hi Appaji,
    According to your description, my understanding is that you want to preserve the Document ID when moving the documents across site collections.
    Per my knowledge, the document id will be preserved when the document has been moved from one Site Collection to another Site Collection.
    During move operations, SharePoint Server 2010 keeps the document ID. During copy operations SharePoint Server 2010 assigns a new document ID. You can control this by setting a Boolean operator on the PersistID column.
    More references:
    http://msdn.microsoft.com/en-us/library/ee559302(v=office.14).aspx
    http://www.sharepointeurope.com/blog/2013/6/26/sharepoint-moving-a-document-with-a-document-id-to-another-site-collection
    Best regards.
    Thanks
    Victoria Xia
    TechNet Community Support

  • SharePoint 2007 performance issue after upgrading the operating system

    We upgraded the operating system of our SharePoint Server 2007 from 2003 to 2008 R2. After upgrade we rebuilt the SharePoint using content DBs we backed up before upgrade. All settings is same except that we moved the DBs to new SQL servers. Now users are
    reporting performance issue with sites. I experienced it myself some of the pages takes 9-30 seconds to load. Also our SharePoint server is single server. I monitored the SharePoint Server and it is fine. I did fiddler trace and here are the result. I see
    lots of 401 (login failed) errors then 302 (redirect) then 200 (OK). Do you know why we are getting 401 errors?
    Result
    Protocol
    Host
    URL
    Body
    Caching
    Content-Type
    Process
    184
    401
    HTTP
    sp07.ourcompany.com
    /bif/EUROPE-AMA
    341
    text/html; charset=us-ascii
    iexplore:15344
    185
    302
    HTTP
    sp07.ourcompany.com
    /bif/EUROPE-AMA
    196
    text/html; charset=UTF-8
    iexplore:15344
    186
    401
    HTTP
    sp07.ourcompany.com
    /bif/EUROPE-AMA/default.aspx
    341
    text/html; charset=us-ascii
    iexplore:15344
    187
    200
    HTTP
    sp07.ourcompany.com
    /bif/EUROPE-AMA/default.aspx
    105,487
    private, max-age=0; Expires: Mon, 22 Dec 2014 21:37:48 GMT
    text/html; charset=utf-8
    iexplore:15344
    188
    401
    HTTP
    sp07.ourcompany.com
    /_layouts/1033/styles/calendar.css?rev=BrbrIU86qTG2EHx1ZUuFBQ%3D%3D
    341
    text/html; charset=us-ascii
    iexplore:15344
    189
    200
    HTTP
    sp07.ourcompany.com
    /_layouts/images/prevbuttonltr.gif
    76
    max-age=31536000
    image/gif
    iexplore:15344
    190
    200
    HTTP
    sp07.ourcompany.com
    /_layouts/images/nextbuttonltr.gif
    78
    max-age=31536000
    image/gif
    iexplore:15344
    191
    200
    HTTP
    sp07.ourcompany.com
    /_layouts/images/day.gif
    1,051
    max-age=31536000
    image/gif
    iexplore:15344
    192
    200
    HTTP
    sp07.ourcompany.com
    /_layouts/images/month.gif
    1,068
    max-age=31536000
    image/gif
    iexplore:15344
    193
    200
    HTTP
    sp07.ourcompany.com
    /_layouts/1033/styles/calendar.css?rev=BrbrIU86qTG2EHx1ZUuFBQ%3D%3D
    28,814
    max-age=31536000
    text/css
    iexplore:15344
    194
    200
    HTTP
    sp07.ourcompany.com
    /_layouts/images/week.gif
    1,057
    max-age=31536000
    image/gif
    iexplore:15344
    195
    200
    HTTP
    sp07.ourcompany.com
    /_layouts/images/weekbox.gif
    149
    max-age=31536000
    image/gif
    iexplore:15344
    196
    200
    HTTP
    sp07.ourcompany.com
    /_layouts/images/alldayDefault.gif
    157
    max-age=31536000
    image/gif
    iexplore:15344
    197
    200
    HTTP
    sp07.ourcompany.com
    /_layouts/images/calnumBttntoday.gif
    146
    max-age=31536000
    image/gif
    iexplore:15344
    198
    200
    HTTP
    sp07.ourcompany.com
    /_layouts/images/calnumBttn.gif
    95
    max-age=31536000
    image/gif
    iexplore:15344

    Hi
    when you request a  Site collection (http://domain/) or a Site (http://domain/foo/) of your Publishing Site you get redirected to the http://domain/Pages/<WelcomePage>.aspx. SharePoint 2007 uses the 302 header (location temporarily moved) for
    this purpose. Surprisingly even WSS uses the 302 header to redirect a root url to the default.aspx. In comparison ASP.NET uses an internal redirect to render the default page when the root url requested: there is no redirect in this situation.
    Check the link which can give more input
    http://blog.mastykarz.nl/sharepoint-2007-redirect-solved-using-301-instead-of-302-redirects/
    for error 401 you can check this link
    http://discussions.citrix.com/topic/97027-no-resources-401-unauthorized/d
    and check SharePoint ULS logs and event viewer for any exceptions.
    Please mark the Answer and Vote me if you think that it will help you to resolved your issue

  • An error occurred during the operation (endpoint id 842). (ALC-WKS-007-027)

    In the log file I get this:
    2 errors with the message: "No scheduler found with name IDPSchedulerService";
    the stack dump says this:
    "tack Dump = com.adobe.idp.event.exception.EventCreateException: Event for event-type TaskCreated cannot be created in the database. Reason:com.adobe.idp.event.policy.EventPolicyException: No scheduler found with name IDPSchedulerService
    at com.adobe.idp.event.manager.EventManagerImpl.createEvent(EventManagerImpl.java:499)
    at com.adobe.idp.event.manager.EventManagerImpl.publishAsynchronousEvent(EventManagerImpl.ja va:636)
    at com.adobe.idp.event.manager.EventManagerImpl.createEvent(EventManagerImpl.java:357)
    at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
    at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorI"
    After the 2 above erros I get:
    EJB threw an unexpected (non-declared) exception during invocation of method "doRequiresNew" on bean "BeanId(LiveCycle8#adobe-dscf.jar#EjbTransactionCMTAdapter, null)". Exception data: com.adobe.idp.event.exception.EventCreateException: Event for event-type TaskCreated cannot be created in the database. Reason:com.adobe.idp.event.policy.EventPolicyException: No scheduler found with name IDPSchedulerService
    and this:
    0000005b ExceptionUtil E CNTR0020E: EJB threw an unexpected (non-declared) exception during invocation of method "doSupports" on bean "BeanId(LiveCycle8#adobe-dscf.jar#EjbTransactionCMTAdapter, null)". Exception data: com.adobe.idp.event.exception.EventCreateException: Event for event-type TaskCreated cannot be created in the database. Reason:com.adobe.idp.event.policy.EventPolicyException: No scheduler found with name IDPSchedulerService
    finally this:
    SystemOut O [LCDS] [ERROR] Exception when invoking service 'remoting-service': flex.messaging.MessageException: ALC-WKS-005-055: An error occurred while retrieving endpoints based on a collection of endpoit ids.
    incomingMessage: Flex Message (flex.messaging.messages.RemotingMessage)
    operation = invoke
    clientId = F7149C09-0009-5D6D-9BC1-6E4D6695EECD
    destination = endpoint-actions
    messageId = FCC3F5ED-6BBF-5973-327A-4BCF1E12CBDF
    timestamp = 1229632510208
    timeToLive = 0
    body = null
    hdr(DSId) = F708081D-AF1A-E1AC-E3A6-3D38677596EC
    hdr(DSEndpoint) = workspace-polling-amf
    In workspace I get this:
    An error occurred during the operation (endpoint id 842). (ALC-WKS-007-027)
    thank you

    Hi Neptus,
    Have you ever gotten response to your question? I am getting the exact same error on my server (WebSphere/AIX/Oracle10g) and I am not sure what is causing it. When I look at the list of running services "IDPSchedulerService" is one of them. I am not sure what is going on.
    Thanks,
    Ilija

  • Server: The operation has been cancelled

    I went thru the related threads before creating this, it seemed to be a different problem. 
    I am getting below error on a particular cube, while running queries.. Below is one of them.. The same query on other cubes in the same server complete successfully... One peculiar thing though is im getting the result back as well as error...
    Result in Result tab in SSMS, and Error in Messages tab... Can anyone please help...  
    select distinct measure_name from $SYSTEM.MDSCHEMA_MEASURES
    Error...
    Executing the query ...
    Obtained object of type: Microsoft.AnalysisServices.AdomdClient.AdomdDataReader
    Server: The operation has been cancelled.
    Execution complete
    Suman

    Hi Suman,
    For the error "Server: The operation has been cancelled", please refer to the links below to check if it works or not.
    http://tablesinadb.blogspot.kr/2012/03/operation-has-been-cancelled-when.html
    http://multidimensionalmayhem.wordpress.com/2011/10/08/an-informal-compendium-of-ssas-errors-part-4-ssas-object-design/
    Besides, are there any detail error on the log? You can troubleshoot this issue by using the Windows Event logs and msmdsrv.log.
    You can access Windows Event logs via "Administrative Tools" --> "Event Viewer".  SSAS error messages will appear in the application log.
    The msmdsrv.log file for the SSAS instance that can be found in \log folder of the instance. (C:\Program Files\Microsoft SQL Server\MSAS10.MSSQLSERVER\OLAP\Log)
    Here is a blog about data collection for troubleshooting Analysis Services issues, please see:
    Data collection for troubleshooting Analysis Services issues
    If the issue persists, please provide us more information, so that we can make further analysis.
    Regards,
    Charlie Liao
    TechNet Community Support

  • ERROR :SCRIPT7002: XMLHttpRequest: Network Error 0x2efd, Could not complete the operation due to error 00002efd. File: default.html

    Hi ,all
    I am beginner for windows 8 app development.
    I created simple project on domain name called www.aaa.com and also hosted web services on same domain. at that time i was able to access web services on my application code using AJAX. Then i created same project on another domain called www.bbb.com then
    i tried to access wcf services from www.aaa.com domain. at that time my javaScript console is throwing this error "SCRIPT7002: XMLHttpRequest: Network Error 0x2efd, Could not complete the operation due to error 00002efd.
    File: default.html". I tried some thing on both end on web services project as well as windows 8 app.
    AT app side in package.appxmanifest file i added below code.
    <Capabilities>
        <Capability Name="privateNetworkClientServer" />
        <Capability Name="internetClient" />
      </Capabilities>
    AT web services side in web.config file i added following settings.
    <serviceHostingEnvironment aspNetCompatibilityEnabled="true"
            multipleSiteBindingsEnabled="true" />
        <standardEndpoints>
          <webScriptEndpoint>
            <standardEndpoint name="" crossDomainScriptAccessEnabled="true" />
          </webScriptEndpoint>
        </standardEndpoints>
    but above all diagnostics are not working for me.
    and one more thing at www.bbb.com domain in sample android app while i am trying to consume my wcf services it is working fine. the problem is specifically for windows 8 app only.
    Here is sample code which i had written in default.html file
    <!DOCTYPE html>
    <html>
    <head>
    <meta charset="utf-8" />
    <title>DemoWebService</title>
    <!-- DemoWebService references -->
    <script src="/js/default.js"></script>
    <script>
    var personNameVar = "Hardik";
    var dataIn = '{' + '"personName":"' + personNameVar + '"}';
    $.ajax({
    url: "http://SomeIP:SomePort/Service1.svc/HelloWorld",
    type: "POST",
    contentType: "application/json; charset=utf-8",
    data: dataIn,
    dataType: "json",
    success: function (data) {
    var object = JSON.parse(data.d);
    if (object.Error == '') {
    $('body').html(object.Response);
    error: function (error) {
    $('body').html(error);
    </script>
    </head>
    <body>
    </body>
    </html>
    so is there any help. I am eagerly waiting for it.
    P.S I am accessing www.aaa.com web services using VPN.
    Thanks in advance,
    Hardik

    In that case, I recommend that you collect a Network trace using a tool such as Microsoft Network Monitor or Wireshark to understand what IP Address is the connection being made to. The 0x2efd error correlates to the WinINet error: ERROR_INTERNET_CANNOT_CONNECT
    meaning that the connection with the remote server cannot be established. When you collect a network trace, try looking for the TCP-SYN signal and see whether your remote server responds with a SYN-ACK.
    Windows Store Developer Solutions, follow us on Twitter:
    @WSDevSol|| Want more solutions? See our blog

Maybe you are looking for