Overlapping layers over and under. Local layering

Back when they had a preview of what could be in CS6 there was a video where they had 5 layers, one the back ground then the remain 4 were like match sticks, arrange to overlap each other to form a square or tic tac toe board. Where you can then create woven layers.
http://youtu.be/3bfjRT-Rt5k
Is it possible to do this yet?

As far as I know, that is something that is under development and not part of PS yet. Only way to do that currently is with layer mask.

Similar Messages

Over and Under Delivery Tolerance Defaults

Hi !
Is there a way to provide a default Over and Under Delivery Tolerance % at Company Code or Purchising Org level?
If yes, please let me know what the menu path is to make that setting.
Our tolerance for Over delivery is 10% standard across the board and we would rather not have to enter it separately in every Purchasing Info Record.
I understand that I could use Purch Val Keys, but we are trying to avoid that as well.
Appreciate the help!
Thanks,
Anisha.

Hi anisha,
Try using this way.
SPRO-MM-PURCHASING--PURCHASE ORDER--SET TOLERANCE LIMITS FOR PRICE VARIANCE
Here u can finalize the upper and lower limits as 5%. the PO shall automatically pick up the same.
Using Purchase value keys is preferred in u r case.
SPRO- MM - PURCHASING - MATERIAL MASTER - DEFINE PURCHASING VALUE KEYS - NEW ENTRIES Define a purchasing value key which has over and under delivery tolerance as 10% in GR/IR controls
and assign this purchasing value key in the material master to which you want to allow 10% variation.
Hope this helps.
Regards,
Nani.

My Mac book pro is dead and the local authorised service center is screwing me. They are asking me almost the cost of a Mac for repairing it. What should be done?

My Mac book pro which is just one and half years old got dead suddenly. My Protection plan got over and the local authorised service center says the logic board is dead and it has to be replaced. The cost for the same which they are telling is Rs.47500 and another Rs.30000 for the display. Its really sad that a new Mac book pro is costing only Rs65000 in the Indian Market. Please help....I have saved lot of money to buy this Mac and its very sad that it goes off in less than 2 years time.

No one here can do anything to help you.

Over delivery & Under delivery

Hi gurus,
How to activate the OD & UD screen in material master.
murugan

Over delivery and under delivery for a material can be defined using purchasing value key.
while Creating purchasing value key you can define the percentage for over and under delivery.
You can define the same using the path
Materials Mangement: Purchasing: Material Master: Define purchasing value keys.
you can enter the purchasing value key in Material Master Record in purchasing view (purchasing value).

I have been taken over by a local network that has disabled my systems profiler and plug-ins. how do I break free?

I have been taken over by a local Network that has disabled my systems profiler and plug-ins. How do I break free?

If you are absolutely sure that this is the problem then you should turn the airport off.

GI for over delivery and under delivery

Could you please reply to the following query
It should be possible to post the GI for an outbound delivery if the quantity effectively picked is over or under the requested quantity.
where is the control for this?Where we set this in the standard SAP scenario?
The goods isssue is applicable foe sales orders stock transport orders.
Thanks

Dear anil
Go to 0vlp (zero), select your item category and click on magnifying lens on top. Now under the tab "Quantity", you can see a field "Check overdelivery". There if you want the system to give a warning message, maintain "A" and if you want to have error message without proceeding further, maintain "B" and save.
thanks
G. Lakshmipathi

Over delivery and under delivery tolarance limit.

Hi all,
I want to configure the over delivery and under delivery tolerance limit
fix i.e. 5%.
Any user can give tolerance up to 5% and not more than that.
Please help me
Regards,
anant

Hi,
U can configure the same . Please refer
SPRO-MM-PURCHASING--PURCHASE ORDER--SET TOLERANCE LIMITS FOR PRICE VARIANCE
Here u can finalise the upper and lower limits as 5%. the PO shall automatically pick up the same.
Hope this helps.
Regards,
Prasanna
Award pls if helpful.

Authorization for PO fields of over delivery and under delivery tolerance

Hi,Any one know how to set authorization for PO fields of over delivery and under delivery tolerance?
For example to allow certain user to edit the these fields but other users will be only display mode.

Better create variant for restricting fields over & under delivery tolerance for certain users than applying authorization.

Under the settings app there's the general column and under the accessibility section the is a setting called black over white does that drain your battery any more than the normal setting

Under the settings app there's the general column and under the accessibility section the is a setting called black over white does that drain your battery any more than the normal setting

Wow. I have not seen that question nor a discussion. I agree with James. I don't think it will, and if the power drain is different, maybe it'll be less and not more.
With a 10 hour battery, you have plenty of time to test it and see. If the battery depletes fast, just go back to the other way.
If you do try it, let us know what you discover.
Thanks ! !

After a reset of settings on IPad2 it turns "on" but i only get to the logo screen with the progress bar under it. so it turns on to logo then to progress bar screen then off. and repeats over and over

Well as I said in the "question", I did a reset of the settings on my IPad2. however when it powered back on from resetting. it lets the the logo screen with the progress bar under it. The progress bar gets about 1/4 of an inch from the left then stops. After a few mins Ipad shuts off then turns on to the logo screen, then goes to the logo/progress bar screen, does whats said above, then off. That cycle just repeats over and over. Any help with this would be appreciated.

Recovery Mode Step by Step
1. Hold Sleep/Wake button down and slide to turn off iPad
2. Turn on computer and launch iTune (make sure you have the latest version of iTune)
3. Plug USB cable into computer's USB port
4. Hold Home button down and plug the other end of cable into docking port. Do not release button until you see picture of iTune and plug.
5. Release Home button.
On Computer
6. iTune has detected iPad in recovery mode. You must restore this iPad before it can be used with iTune.
7. iPad Recovery Mode on computer screen
8. Select "Restore iPad"...
9. Select "Restore and Update"
10. Extracting Software.
11. Preparing iPad for restore.
12. Waiting for iPad.
13. Verifying iPad restore...
14.Restoring iPad software.
15. Verifying iPad software.
16. Verifying iPad Restore...
17. Restoring iPad firmware...
18. Your iPad is restored to factory settings; keep iPad connected to computer
19. Activate iPad
20. Enter Apple ID and Password
21. Continue
22. Welcome to Your New iPad
(a) Set up as new iPad (b) Restore from this backup (select from list of backups)
23. Restore from this backup
24. Continue
25. Restoring iPad from backup
26. The settings of your iPad have been restore; keep iPad connected to computer
27. Syncing iPad (Step 1 to 5)
28. Preparing apps to sync
29. Copying 1 of 9
30. Sync apps, movies and music to iPad
31. Finishing syncing
32. Eject iPad

Over-consumption and under-consumption in Sucontracting.

Hi,
how can I manage an over-consumption and under-consumption in subcontracting.
What are the related activities that must be done in this cases?
Best regards

Hi
How can I manage an over-consumption and under-consumption in subcontracting?
for that you have to do subsequent adjustment in T.Code: MIGO....
For eg.) As per your BOM....you have sent 10kg. of Grease to your Sc-Vendor useing M.Type:541....for assembling of your FG...Now after completion of the Assembling,you found that only 7kg. of Grease only used by Sc-Vendor for your assembling and 3kg of Grease is still lying at SC-Vendor's Place.......Now you have to do Subsequent adjustment in MIGO and take back the balance under consumed Grease from SC-Vendor...To Do this,
Goto -
> T.Code: MIGO...choose the transaction "Subsequent Adjustment" and ref. doc. as your SC-PO...
And in Itm View,for the Line item Grease....you maintain the underconsumed qty( ie. 3kg) and Check the Under Consumption check box ....
Now if you execute the subsequent Adjustment....this 3kg of Grease will be regenerated in 544 O- movement type as under consumed component and it will be Lying at Sc-Vendor's place...and you have to get back this into Company's Stock separately in MB1B useing M.Type:542...
Same this you can do for Over Consumption also....for this you should not Check the Under Consumption Check Box....Here the Over consumed material will be consumed in 543 O- movement type...and again you have to issue this Over Consumed qty to SC-Vendor in M.Type:MB1B useing m.Type: 541...
The same subsequent Adjustment you can do for Scrap generation also....
Hope you will understand the subsequent Adjustment process in Sub-Contracting...
Reward if useful
S.Baskaran

C309A keeps going off- and on-line over and over again

I have a new C309A configured to print wirelessly. Everything installed correctly during setup and all network tests are successful. It worked for a few days but now I can't print since the printer looks to be going offline and then on again constantly (I can actually watch it change status over and over again if the printers folder...). If I manage to catch it when the printer is showing online I can print, so I know that my computer will talk with the printer. And I have another computer that prints wirelessly just fine.
I've tried tech support via chat and phone - big waste of time since they obviously have no technical knowledge and are just reading scripts.
I was told by one support contact that there is a fixpack, but it was for another model (4580 I believe). He indicated it would work on the C309A as well. HOWEVER when I downloaded it it of course would not install since I don't have that printer. I tried all product matches for 4580 (he said he picked the wrong one the first time so I tried again and again. Each time was just picking the wrong one apparently. Or could it be that he had no idea what he was talking about?) and none of them would work. There are no fixpacks for the C309A.
I've seen in other threads that this could be a firewall issue but I'm not so sure. I've tried disabling mine and still had the issue.
I'm running windows XP professional. my firewall is symantec. and my printer is currently a very large and expensive paperweight.
Anyone have any ideas????????
This question was solved.
View Solution.

When the printer goes offline, see if you can open the printer's internal web page by browsing to its IP address.
If you can, then we know communications between the PC and printer are working and that the offline messages are false positive indicators.
Next, I'd like to try a manual installation of the printer queue. Here's the sequence for Vista:
Click >> Start >> Control panel >> Printer.
Click the 'Add Printer' icon. The 'Add Printer' dialog box opens.
Click 'Next' button on the 'Welcome to the Add Printer' Wizard dialog box.
Select 'Local printer' in the Local or Network Printer dialog box.
Under Select a Printer Port option, select "Create a new port" and select "Standard TCP/IP Port" and click "Next" button.
In the "Welcome to the Add Standard TCP/IP printer port wizard" make sure that the printer is turned on. Click "Next" button.
Under "Add Standard TCP/IP Printer Port" enter the printer's host name that is printed from the printer's netwotrk configuration page.
Now, select HP (not Hewlett-Packard) from the list of manufacturers, select Photosmart C309 from the list of Printer models and click 'Next' button.
The Printer name will be highlighted on the next window. Click 'Next' button.
It will ask for the Printer name -- leave the default value.
Click 'Yes' for making the printer default. Click 'Next' button.
The Print Test Page box appears.
Select 'Yes' to print a test page.
Click 'Finish' button to complete the installation.
It should print a test page.
BTW -- what kind of wireless-router do you have? Also, press and release the <setup> and <#> keys. This will print an internal connectivity diagnostic report. Scan and email me the report to my work email: wireless at hp dot com.
Regards / Jim B / Wireless Enthusiasts
( While I'm an embedded wireless systems engineer at work, on this forum I do not represent my former employer, Hewlett-Packard, or my current employer, Microsoft )
+ Click the White Kudos star on the left as a way to say "thank you" for helpful posts.

I have another computer that a virus may have taken over and I cannot log into it anymore. I just downloaded Itunes on a new computer but most of my songs are not on there. Is there a way to still access or find those songs? Remotely or another way? I

I have another computer that a virus may have taken over and I cannot log into it anymore. I just downloaded Itunes on a new computer but most of my songs are not on there. Is there a way to still access or find those songs? Remotely or another way? Or do I need to take it to a tech to get my files off of my hard drive?

Edit > Preferences > Store check Music under Automatic Downloads.
Open the iTunes Store from left hand column, then select Purchasedfrom the column on the right, click the Not In My Library button and select the tunes you want to download again.
That said, you seem to be under a misapprehension as to how iTunes works, or at least how it has worked in the past. It has, until recently, been up to you take care of your purchases once they have been downloaded. You had a one-time download which you were reminded to back up. With the recent change to this policy you can at least download your store purchases again, but having a personal backup of your iTunes store purchases, stuff purchased elsewhere and files ripped from your CDs will still be preferable to gathering all the stuff together again in the event of a disaster.
For a backup strategy see this User Tip.
tt2

How do I create a new user, move my old files etc over, and delete old user

This is why I think I need to.
My computer got hit by lightening, and I may have created a new user account through netinfo rather than system preferences /accounts/+user. Mail used to open twice, but no longer. Now, Safari askes me for my keychain password twice, Spotlight can't find a folder on the computer when the search is restricted to folder and computer, though the folder is there and easyfind finds it, and when System Preferences/Spotlight/Privacy has the hard drive icon added, then deleted, Spotlight still does not find anything. (Yes, everything is backed up, on CD, DVD, and online.) Microsoft Tec Support says
"Here is a summary of the key points of the case for your records.
When you contacted us on August 8, you had requested assistance with Microsoft Office 2004, as your installation of the updates was unable to find the correct version of the software to update. After creating a New MAC User, we identified the issue to be with a corrupt MAC User account, and not a Microsoft issue. "
I believe Microsoft. So, creating a new user was easy.
But copying files uses up too much hard drive (movies, music), and may miss keychains, preferences, mail, address book, and documents. Since Spotlight no longer works, who knows what is happening. (Yes, I've repaired persmissions, and disk repair. No change). I'm using up my hard drive trying to move files to the new user. If I share files, or put them into a public folder, then delete the old user, will I still have the old user's files in the new user's account? It is not clear to me what I should be trying to do in order to create a new user, move my old files etc over, and delete old user. Thanks.
My responses will be slow, because I have to drive to town to use the internet. I've ordered a new airport which may take care of that problem. SO be patient.

Hey -
I need to do the EXACT same thing, but have no idea how. Has anyone out there done this?
My situation is a tad different..this is a new Mac (and I'm a brand new Mac user). Tons of querks occur under my original account (videos won't run, Safari won't support certain plug-ins). I spent 6 hours on the phone w/ 4 different Apple Reps and nobody could fix it. A rep finally looked at my MacBook Pro in person today. He created a new account just to see if that would work and under that new account, everything works perfectly fine (no querks, can view video). He tried switching a million settings in my original account to no avail.
He said to create a new account (as he did) and move my files over to the new account and then go back to the original and delete it. How do you do this?! I can't figure it out! I've got a new account created, but of course it just has the default folders in it w/ the little red icons next to them! Thanks in advance!

Firefox 4 refuses to load pages on my mac os 10.5.8 and brand new laptop as well- i gave to force quit over and over- can i revert to an earlier version? will the problem be fixed soon? - previous versions worked fine

ever since i downloaded the 4.0 version of firefox, it has not worked on either computer[ macs] - earlier versions worked fine. It refuses to load pages and freezes [ on various sites , not just one]so i have to force quit it over and over.

HI,
Empty the Safari Cache from the Safari Menu Bar more often.
Go to the Safari Menu Bar, click Safari/Preferences. Make note of all the preferences under each tab. Quit Safari. Now go to ~/Library/Preferences and move this file com.apple.safari.plist to the Desktop.
Relaunch Safari and see if that makes a difference. If not, move the .plist file back to the Preferences folder. If Safari functions as it should, move that .plist file to the Trash.
Carolyn

Overlapping layers over and under. Local layering

Similar Messages

Maybe you are looking for