Overview for data in GP

Hi,
we have to build a very complex Workflow with a lot of Data. One of the feature that we must implement is, that everyone inside the process can see, which data is filled in. Do you know a simple way to do that? Can I access to the stored Data via Visual Composer to show them?
The best solution is, that everyone can jump to the steps before and can see there, what data were insert. Do you know what I mean?
Thanks,
Peter

Hi Petrelli,
Into an action you can attach two Callable Objects types: One for execution and another for Display.
Display will provide what you want. Don't forget that u'll need both CO.
Best Regards,
Pedro Nunes

Similar Messages

  • Info Source Overview for a CUBE shows RED for the associated Master Data

    Hi All,
    When i click on the InfoSource Overview for a CUBE, the associated Master Data shows RED even though the Master Data has been loaded successfully.  I am working in BI 7.0.
    What could be the fix for this so that the Monitor Indicator in InfoSource Overview shows the Actual Status (Read Green if successfully Loaded) of the Loads.
    Arjun

    Hi Arjun,
    You might want to check the following links:
    infosource overview
    Infosource Overview
    InfoSource Overview is Red
    I suppose the overview can be ignored in your case.
    Hope it helps.
    Thanks,
    Abhishek.

  • Hiding Status column in MSS Status Overview for Personnel Change Requests

    Hi,
    We have MSS implemented in SAP Portal.
    We are using Status Overview for Personnel Change Requests iview for which we have multiple columns displayed with data.
    We need to hide Status column in Status Overview for Personnel Change Requests iview for all the users.
    Can any body please let me know how it can be done.
    Regards,
    Pradeep B
    Edited by: pradeep balam on May 17, 2011 4:01 PM

    Hi Pradeep,
    Preview the portal page which you want to edit, in this case status overview in PCR. In the preview press the CTRL-key and right-click on the column that you want to edit. Here, you will be able to perform your customizations like hiding columns, labels etc
    Hope it helps,
    Prathamesh

  • Configuration overview for Reciever Determination Error

    Hi friends !!
    while creating Reciever determination... at configuration Overview for reciever determination (tab)   Reciever(Partner / Service) showing <b>Not Defined</b>
    can anybody suggest me why this issue is coming
    Regards
    Abhishek Agrahari

    Hi Abhishek,
                      while creating Reciever determination... at configuration Overview for reciever determination (tab) Reciever(Partner / Service) showing Not Defined
    This shows as undefined because you may not have selected the Service in the Configured Receivers in the window above configuration Overview ......once u select the receiver service and save the data then u need to go to the configuration Overview space and right click on the not defined link and select NEW SPECIFIC and there select ur receiver service....do the same for mapping and receiver agreement....This will serve ur purpose.
    Thx
    Ravijeet

  • Looking for data card‏

    Dears
    I have Wireless-G Router for Mobile Broadband from Linksys with these specifications
    model number :  WRT54G3G-EU
    serial number  :  CKI11H110780
    I am looking for data card that supported by this router
    Here is five models of data cards from Option.com
    http://www.option.com/products/overview.shtml
    Which one of these five data cards models are supported by this linksys router ?
    Specifically from these data cards
    Waiting for your replay as soon as possible
    Best Regards    

    UP UP UP

  • Pegging overview for a product

    Hello
    In the transaction RRP3 I have a pegging overview for location product.
    Is there any possibility to get an pegging overview for a product (like a table in the RRP3)?
    When no? What function have I use for a z-program.
    Thanks,
    Sven

    Hello Ramesh
    I use the FM BAPI_MOSRVAPS_GETLIST2
    If found the problem, but not the solution.
    If i debug the BAPI_MOSRVAPS_GETLIST2:
    In the FM APO_BAPI_SELECT_GET_ORDID the FM /SAPAPO/DM_PRODUCTS_GET_IDS have a problem to get the matlocids.
    When i debug these FM, there is no problem.
    When i run the FM normal, the FM lost the selection.
    Thanks, Sven
    DATA: product_tab TYPE TABLE OF BAPIPRODUCTRANGE,
          product TYPE BAPIPRODUCTRANGE,
          location_tab TYPE TABLE OF BAPILOCRANGE,
          location TYPE BAPILOCRANGE,
          orderhead TYPE TABLE OF BAPI10503ORDHEADOUT,
          output_nodes TYPE TABLE OF BAPI10503ORDOUTPUTOUT,
          pegging_output_nodes TYPE TABLE OF BAPI10503ORDOUTPUTPEGOUT,
          return TYPE TABLE OF BAPIRET2.
    product-low = '0000000000000000000000000000000008809500'.
    product-option = 'EQ'.
    product-sign = 'I'.
    APPEND product TO product_tab.
    location-low = 'DLZ1'.
    location-option = 'EQ'.
    location-sign = 'I'.
    APPEND location to location_tab.
    break leisve.
    CALL FUNCTION 'BAPI_MOSRVAPS_GETLIST2'
      EXPORTING
        LOGICAL_SYSTEM               = 'SC7CLNT100'
        START_TIME                   = '20000101000000'
        END_TIME                     = '20101231000000'
    *   EXCLUDE_EXPORT_FLAGS         =
    *   MAX_NUMBER_OF_ORDERS         =
    *   TRANSFER_MODE                =
        PLNG_VERSION                 = '000'
    *   IO_NODE_SELECTION            = 'O'
    * IMPORTING
    *   NUMBER_OF_ORDERS             =
    TABLES
       PRODUCT_SELECTION            = product_tab
       LOCATION_SELECTION           = location_tab
       ORDER_HEADS                  = orderhead
       OUTPUT_NODES                 = output_nodes
       PEGGING_OUTPUT_NODES         = pegging_output_nodes
       RETURN                       = return
    break leisve.

  • MB5B Report for Date Wise Stock and Value

    Hi,
    I am Taking MB5B Report for Date Wise Stock and Value.
    But I have one doubt all stocks is coming or not in these report like Unrestrected Stock,Return Stock.Blocked stock,Transist stock,Restrected Stock,qty Inspection Stock.
    I have another Doubt in these report three Stock type indicaters are there like these.
    1.Storage Location / Batch Stock
    2.valuated Stock
    3.Special Stock.
    But i have one doubt what is defferent these
    1.Storage Location / Batch Stock
    2.valuated Stock

    Hi Prasad,
    Yes MB5B report consider the Unrestricted, Quality, Blocked, Transit stock and restricted stock. Not sure about Return Stock.
    If you select the Storage location/Batch stock radio button then the system will display all the possible stock from the storage location and the corresponding batch also.
    If you select Valuated stock radio button then system will show only the valuated stock not the Non-valuated stock. Because Non-valuated material type is available in SAP system will not show those stock suppose if you select the Valuated stock radio button.
    Regards
    Karthick

  • HT201250 Can I partition my external hard drive and use one partion for time machine and the other one for data that i may want to use in different computers?

    I have this doubt. I've just bought an external drive, especifically a Seagate GoFlex Desk 3 tb.
    I want to know if it is recomendable to make a partion exclusively for time machine and let another one so I can put there music, photos, videos, etc that I should need to use or copy to another computer.
    May half and half, 1.5 tb for time machine and 1.5 tb for data.
    I have an internal hard drive of 500 GB (499.25 GB) in my macbook pro.
    Any recommendation?

    As I said, yes. Be sure your Time Machine partition has at least 1 TB for backups.
    1. Open Disk Utility in your Utilities folder.
    2. After DU loads select your hard drive (this is the entry with the mfgr.'s ID and size) from the left side list. Click on the Partition tab in the DU main window.
    3. Under the Volume Scheme heading set the number of partitions from the drop down menu to two (2). Click on the Options button, set the partition scheme to GUID then click on the OK button. Set the format type to Mac OS Extended (Journaled.) Click on the Partition button and wait until the process has completed.

  • Data folder can not be opened in finding " AirPort Time Capsule " The operation can not be completed because the original item for " data" does not exist .

    Hi
    I have a " AirPort Time Capsule " (firmware 7.7.3) When I try to open the data folder in "finder". Then I got the message  " The operation can not be completed because the original item for " data" does not exist". I have a lot of data and I can understand why I get this message?
    Anyone who can help? Thanks..
    Br. Bo

    Get a USB drive of 2TB or more.. assuming your TC is 2TB. Either preformatted Mac or plug into your Mac and format it standard Mac OS Extended Journaled in disk utility.
    Do a full archive of the TC. You do this using airport utility. Do not click the erase disk.. I marked in green.. just the archive.. that is to backup the internal disk to the USB disk. It is not fast.. take it that the process will go at around 40-50GB/hr.
    Once you complete the archive .. it is a direct image of the data on your TC.. you can then plug it into your computer directly.. and then try and open the files you lost.. if you cannot open them.. open disk utility and fix the permissions.
    http://osxdaily.com/2015/01/13/repair-disk-permissions-mac-os-x/
    Or try the methods apple recommends..
    OS X Yosemite: Set permissions for items on your Mac
    It is possible to fix things on the USB drive because it is locally mounted.. but you cannot fix it on TC which is network drive.

  • Why am I being charged for data when connected to wifi AND not using my phone?!

    WHY am I being charged for data that I'm not using? At times when I'm asleep AND my phone is connected to wifi?!  This happens at really specific, alternating times like 9:54 pm every day, or 12:01 am, 6:01 am and then 12:01pm and 6:01pm. When I called I was told  "maybe your wifi at home is disconnecting" or "maybe your phone is connecting to atnt or sprint". It's not possible that my phone is disconnecting from wifi every six hours on the dot and, at that exact time, I'm always using data. I find it hard to believe that I live in a HUGE city and my phone magically connects to other networks and I NEVER notice this. Verizon is full of LIARS (and maybe’s) and I'm not convinced that these data charges are a coincidence. I was told to turn off my cellular data to see if the problem resolves itself. Why should I alter my daily life when Verizon is clearly the one with the issue? I hope there's a class action lawsuit because Verizon is trying to get over on everyone! I need answers!

        Hello NotHappy101,
    I think it's quite odd that your data usage is at very specific times. We can certainly take a closer look. Please reply to my Direct Message, so we can get some additional details.
    Thanks,
    MichelleH_VZW
    Follow us on Twitter @VZWSupport

  • I have been a loyal customer for years and have a hot spot because internet options are very limited in our rural area.  I have stayed with 10G since the beginning.  Most months I don't use the 10G.  Verizon has no problem with me paying for Data I don't

    I have been a loyal customer for years and have a hot spot because internet options are very limited in our rural area.  I have stayed with 10G since the beginning.  Most months I don't use the 10G.  Verizon has no problem with me paying for Data I don't use.  This month my daughter comes home from College and she accidentally uses 24G.....14 over get blind sided with $140.00 in overages.  I called Verizon today......stopped in to the store today......My neighbor told me they waved charges for her one time.  Lots of charges.....But I'm am getting no help.  Not even an offer of a payment plan to help me out.  I went back just 6 months and I have over paid for 19G.....Seems like they would like to help out their loyal customers!!!!     Does anybody have any suggestions on how to deal with them?   We are not wealthy....or I would just pay this and walk away......

    There is a big misconception in what customers believe a cell carrier is obligated to do.
    You pay a set price to use up to that amount of xx data. It makes no difference if you use it to the paid limit or way under. Its like peace of mind when you don't have to worry about a data counter.
    Your daughter used the data, your plan is quite clear of what overage charges are. Why should or would Verizon wireless just forgive the charges because you are a customer? Your daughter used the data, get the money from her. That is the responsible thing to do.
    There is no "I have been a loyal customer so please remove the $120, or $250, or $2,000.00 since I did not mean to use it"
    Your electric company, or gas company or any other company does not remove valid charges. Why should Verizon wireless?
    Just pay the invoice and don't think you are being mistreated because Verizon is a business and not a charity.
    Good Luck

  • Issue with table ROOSPRMSF entries for data source 0FI_AP_4

    Hi Experts,
    I am facing with an issue where we found incosistencies with table ROOSPRMSF in R/3 system.
    In BW , we have done initializations based on fiscal period selections (none of the selections overlap) for data source 0FI_AP_4.
    We have done in total 7 initializations. So in BW system in table RSSDLINITSEL we have 7 initialization requests.
    But in R/3 system we have 49 records for data source 0FI_AP_4 in ROOSPRMSF table out of which 42 are invalid records.
    I suspect that these 42 invalid records are created due to the execution of program RSSM_OLTP_INIT_DELTA_UPDATE when the tables ROOSPRMSF are actually holding the 7 initialization request entries.   Due to this each and every initialization request is linked to rest of the other intialization requests and ended with 49 records in table ROOSPRMSF table.
    Now our data loads are running fine but daily a short dump is raised . In the daily loads, BW init records in RSSDLINITSEL are compared with ROOSPRMSF entries and all the other 42 records which are invalid are written into system log and a short dump is raised.
    In order to fix these inconsistencies i checked for OSS note 852443. (Point 3 in OSS note)
    But it is specified to delete the delta queue for data source 0FI_AP_4 in RSA7 and instructed to execute the program RSSM_OLTP_INIT_DELTA_UPDATE so that the ROOSPRMSF table will be reconstructed with valid records available in RSSDLINITSEL. 
    From OSS note 852443 point 3
    "3. If the RSSDLINIT table in the BW system already contains entries, check the requests listed there in the RNR column in the monitor (transaction RSRQ). Compare these entries with the entries in the ROOSPRMSF and ROOSPRMSC tables with the INITRNR field. If, in the ROOSPRMSF and ROOSPRMSC tables for your DataSource source system combination, there are more entries with different INITRNR numbers, use transaction RSA7 in an OLTP source system to delete all entries and then use the RSSM_OLTP_INIT_DELTA_UPDATE report mentioned in the next section. For a DataMart source system, delete the entries that you cannot find in the RSSDLINIT table using the procedure described above."
    My question is if we delete the delta queue in RSA7 then all the tables in R/3 (ROOSPRMSF, ROOSPRMSC, Time stamp table) and BW (RSSDLINITSEL, initialization requests will be deleted) will be cleared. Then how will the program RSSM_OLTP_INIT_DELTA_UPDATE  copy entries into ROOSPRMSF table in R/3 ?
    Could any one please clarify this ?
    Thanks
    Regards,
    Jeswanth

    Hi Amarnath,
    Did you unhide the new field in RSA6 and regenerated the DataSource?
    Often SAP will populate newly added fields (belonging to the same (set) of table(s) used for extraction) automatically (e.g. SAP uses 'move-corresponding' in it's extractor-code, or, in this case, reading all fields from the DD, FM BWFIU_TRANSFORM_FIELDLIST).
    If the DataSource looks fine to you and the field is still not populated in RSA3 you can't go without a user-exit.
    Grtx,
    Marco

  • When I tried to Mail Merge for Data is is not exporting any data.

    HI,
    EBS-12.1.3
    DB-11gR1
    OS - RHEL 5.6
    [With my Login User and SysAdmin Login User] When I enter into to the "People -> Enter and Maintain" Form and then I press the "Export Button", there is error Alert
    Function is not available to this responsibility. Change Responsibilities or Connect to the System Administrator
    I Added the Function "HR ADI Seeded Integrator Form Functions" into the "AE HRMS Manager" Responsiblity. It is also working and Export Data icon is enable.
    Problem:
    But Problem is when I tried to Mail Merge for Data is is not exporting any data.
    ====================================================================
    Steps
    1.Move to the "People -> Recruirment" and then "Request Recruitment Letter" .
    2. Enter the New Request. as
    Letter Name "App. Letter Contract Site",
    Automatic or Manual = Manual.
    Select the Name from the LOVs for the Request for Detail Block.
    3. Press the "Export Data" icon.
    4. Integrator Page Appear with my Custom Integrator Name as "Appointment Letter - Contact Site".
    5. Select the "Word 2003" from the View List. and Reporting is Checked.
    6. Review the Folowing Enteries as:
    Integrator Appointment Letter - Contact Site
    Viewer Word 2003
    Reporting Yes
    Layout App. Letter Contract Site
    Content XXHR_MBE_APP_LET_CONT_SITE_V
    Session Date 2011/08/02
    Mapping XXHR_MBE_APP_LET_CONT_SITE_V Mapping
    7. Press "Create Document" Button.
    8. It will open the Excel 2003 and then Word 2003. But no data down download from the Form.
    9. It open the Mail Merge Letter but no Data is Display.
    ===========================================================
    Note:
    a. I am following the Steps from the Link:"http://apps2fusion.com/at/38-ss/351-generate-recruitment-letters-web-adi".
    b. From the "Desktop Integrator Manager", "Oracle Web ADI", "HRMS Web ADI", it is working fine and Dowload the Data.
    ===========================================================
    Thanks
    Vishwa

    Please try the solution in ("Function not available to this responsibility" Error While Cliclking On Forms Personalisation [ID 1263970.1]) and see if it helps.
    Thanks,
    Hussein

  • Need to build communication redundancy using serial RS-232 for Data Transfer b/w Host and RT irrespective of TCP/IP Data Transfer

    Hi - I would like to build the logic in which it should accomodate the communication redundancy using serial RS-232 for Data Transfer b/w Host and RT irrespective of TCP/IP Data Transfer.
    I want to do data transfer b/w host and RT through RS232 VISA portal whenever TCP/IP ethernet cable has been unplugged from the controller continuosly , it should keep on checking for TCP/IP link re-establishing also , when ever the tcp/ip link established again that time the communication should be using in that link only. This is accomplished by deploying the RT vi as execuatbale file. I made some logic regards to the above said logic , bur it was not working as much I expected.
    I request you to go through the attached two VI's and let me know , what I did wrong in that,
    Please do the needful.
    Attachments:
    TCP_Serial_Host.vi ‏33 KB
    TCP_Serial_RT.vi ‏41 KB

    even i am new to this topic and i am trying to get familiar with these protocols
    refer to tcp server/client examples in labview examples

  • Mapping conversion help needed for date

    Hi Experts,
    I need help in message mapping convesion for date field
    The source date field can have value '2010-06-04T02:09:59.610-07:00' or 2010-06-04T02:09:60.610-07:00
    I have to change it to '2010-06-04T02:09:59.000-07:00'. ie, if the seconds are 59.XXX, or 60.XXX, then change to 59.000.
    Please let me know the best way to do this
    Thanks
    Mike

    Again, to make it more clear
    The source date field can have any date value such as
      2010-06-04T02:09:59.610-07:00 -
    This needs to be changed to 2010-06-04T02:09:59.000-07:00
      2010-06-04T02:09:60.610-07:00 -- This needs to be changed to 2010-06-04T02:09:59.000-07:00
    2010-06-04T02:09:60.000-07:00 -- This needs to be changed to 2010-06-04T02:09:59.000-07:00
    2010-06-04T02:09:59.000-07:00  - This need not be changed
    2010-06-04T02:09:58.610-07:00 -- This need not be changed
    2010-06-04T02:09:57.610-07:00  etc etc - These need not be changed.
    The only change using date function is for the first two dates, in which 59.XXX and 60.XXX need to be replaced with  59.000
    Using the above date function, all the seconds 59.XXX, 58.XXX, 60.XXX, etc etc,,, are converted to 59.000, 58.000 and 60.000
    I dont need this as per the requirement. So looks like the UDF needs to be altered a little to accomodate my requirement.
    Please help me.
    Thanks
    Mike

Maybe you are looking for