Ovi email very often bouncing

Why do postings to my Ovi email account bounce so frequently?
This is not a one-off it happens a lot. Sometimes it works sometimes it bounces.
Every time it does this I get annoyed, yet a trial "mail to self" from my ovi account comes through straight away, and it appears normal.
I have been testing it from various other email accounts and I often get bounces. For example today's test from Gmail shows me : (xxx is my account)
Delivery to the following recipient failed permanently:
[email protected]
Technical details of permanent failure:
Google tried to deliver your message, but it was rejected by the recipient domain. We recommend contacting the other email provider for further information about the cause of this error. The error that the other server returned was: 554 554 delivery error: dd This user doesn't have a ovi.com account ([email protected]) [0] - mta1210.mail.ac4.yahoo.com (state 18).
I have a load of diagnostic info sent back by another account which i won't post here. - So is my experience common? - What's up?

Hi Tirestudent,
Welcome to the forum!
Does this mean you are unable to open the app as it will just give an error "application error"? Can you try to access other apps and check if they have the same issue? Have you tried rebooting your phone?

Similar Messages

Ovi email account on X2 - 01 not responding

Hi there. Unfortunately I cannot acces my ovi account on my cell phone. When I try to access my account, it says "application error" and then when I select the details option it says "java/lang/NullPointerExeption" I have no idea what this means.
However I can access my account from my laptop. The tile on the main menu with the "@" sign does not allow me access. It's important that this gets sorted out, I use my cellphone for email very often for work. Any ideas about what's going on?
Thanks

Hi Tirestudent,
Welcome to the forum!
Does this mean you are unable to open the app as it will just give an error "application error"? Can you try to access other apps and check if they have the same issue? Have you tried rebooting your phone?

I have my Iphone 3gs set to "do not delete before asking", but after viewing an email it very often disappears without me deleting. How can I correct this?

My email messages often disappear after I read them without me deleting them. I have the option on mail settings clicked that states "do not delete with asking". Why is this happening and how can I correct it. When I return to read the email again, it is gone.

tantar wrote:
I have the option on mail settings clicked that states "do not delete with asking".
There is no such option in the mail settings.
Who is your email provider? Is it a POP or IMAP account? So you also have a computer set up to access that email account? If so, if the mail client on the computer is set to use the POP3 protocol, it may be deleting the mail from the server as it downloads it. That is the default behavior with POP3.

Very often I get a contact error message when I try to use my contact list to send an e mail. If I use internet exployer I don't have a problem, so it can't be a problem with aol.

Very often I get a contact error message when I try to us my contact list to send an e mail. If I use internet exployer I don't have a problem, so it can't be a problem with aol..

See this support article - https://support.mozilla.org/en-US/kb/change-program-used-open-email-links

Sdlc interface down very often

Hello,
In my customer site, SDLC device connect to 2600. IOS version is 12.0.7T. Then access AS400 through DLSW function. We showed log and found the connected interface down very often. show log as below.
We checked AS400 log and didn't find the SDLC device inactive ever. And we check SDLC device, the device work well, user didn't find any problem??
We don't know why always log of message showed the interface down.
Anyone can help me??
.Jun 23 08:29:56 Taiwan: %LINK-3-UPDOWN: Interface Serial1/0, changed state to down
.Jun 23 08:29:57 Taiwan: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/0, changed state to down
.Jun 23 08:30:01 Taiwan: %LINK-3-UPDOWN: Interface Serial1/0, changed state to up
.Jun 23 08:30:02 Taiwan: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/0, changed state to up
.Jun 23 08:33:06 Taiwan: %LINK-3-UPDOWN: Interface Serial1/0, changed state to down
.Jun 23 08:33:07 Taiwan: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/0, changed state to down
.Jun 23 08:33:11 Taiwan: %LINK-3-UPDOWN: Interface Serial1/0, changed state to up
.Jun 23 08:33:12 Taiwan: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/0, changed state to up
.Jun 23 08:36:16 Taiwan: %LINK-3-UPDOWN: Interface Serial1/0, changed state to down
.Jun 23 08:36:17 Taiwan: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/0, changed state to down
.Jun 23 08:36:21 Taiwan: %LINK-3-UPDOWN: Interface Serial1/0, changed state to up
.Jun 23 08:36:22 Taiwan: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/0, changed state to up
.Jun 23 08:39:25 Taiwan: %LINK-3-UPDOWN: Interface Serial1/0, changed state to down
.Jun 23 08:39:26 Taiwan: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/0, changed state to down
.Jun 23 08:39:30 Taiwan: %LINK-3-UPDOWN: Interface Serial1/0, changed state to up
.Jun 23 08:39:31 Taiwan: %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1/0, changed state to up
JSB025a#sh inter se 1/0
Serial1/0 is up, line protocol is up
Hardware is CD2430 in sync mode
Description: connect to SNA pu2.1
MTU 1500 bytes, BW 128 Kbit, DLY 20000 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation SDLC, loopback not set
Half-duplex enabled.
cts-delay 0 milliseconds
dcd-txstart-delay 100 milliseconds
dcd-drop-delay 100 milliseconds
transmit-delay 0 milliseconds
Errors - 0 half duplex violation
Router link station role: PRIMARY (DCE)
Router link station metrics:
slow-poll 10 seconds
T1 (reply time out) 3000 milliseconds
N1 (max frame size) 12016 bits
N2 (retry count) 20
poll-pause-timer 10 milliseconds
poll-limit-value 1
k (windowsize) 7
modulo 8
sdlc vmac: 4000.2625.01--
sdlc addr 01 state is CONNECT (xid-poll)
cls_state is CLS_IN_SESSION
VS 5, VR 0, Remote VR 5, Current retransmit count 0
Hold queue: 0/200 IFRAMEs 116636/58170
TESTs 0/0 XIDs 40235/14460, DMs 6784/6736 FRMRs 0/0
RNRs 7/0 SNRMs 9757/0 DISC/RDs 9733/0 REJs 0/0
Poll: clear, Poll count: 0, ready for poll, chain: 01/01
Last input 00:00:00, output 00:00:00, output hang never
Last clearing of "show interface" counters 9w3d
Queueing strategy: fifo
Output queue 0/40, 0 drops; input queue 0/75, 0 drops
5 minute input rate 0 bits/sec, 50 packets/sec
5 minute output rate 0 bits/sec, 0 packets/sec
156063821 packets input, 318338246 bytes, 0 no buffer
Received 0 broadcasts, 0 runts, 0 giants, 0 throttles
11 input errors, 0 CRC, 0 frame, 0 overrun, 0 ignored, 11 abort
155708948 packets output, 337016303 bytes, 0 underruns
0 output errors, 0 collisions, 43092 interface resets
0 output buffer failures, 0 output buffers swapped out
106807 carrier transitions
DCD=up DSR=up DTR=up RTS=down CTS=down

Hi,
I believe that your line keeps bouncing due to Data
Carrier Detect(DCD) going down. I didn't see a copy
of the interface config but do you have the following
command under your interface?
half-duplex controlled-carrier
This in conjunction with the dcd-txstart-delay and
dcd-drop-delay settings will cause the DCE to drop
DCD frequently.
These are for very specialized environments which
probably are not what you have.
What is your environment, with respect to the
connection to the AS/400? Is it just a Cisco DCE
cable connected to an AS/400 cable? Or are there
other cables/switches/modems involved?
If you just have the Cisco DCE cable connected to
the AS/400's cable then you do not need that command.
Otherwise, it is possible you have a cable or
physical interface problem.
Please include your interface's config if this
information wasn't enough to resolve the problem.
Thanks and regards,
Ed Mazurek

Outlook 2013 and OVI email

I have recently updated all my pc's to windows 8 and office 2013 (beta for now)
i seem to bee having issues with the Outlook 2013 being able to set-up my OVI email account.
there are no issues when using the windows mail platform in windows 8 which automatically pulls the settings and works very well, however, the Outlook 2013 cannot pull the settings automatically nor when i input manually, like before, does it accept it.
has anyone been able to get Outlook 2013 to connect to OVI.com Email with IMAP yet?
If so, can you please post what settings you are using so that I can try and duplicate it?
settings already tried:
imap.ovi.com
smtp.ovi.com
mail.ovi.com
mail.ovi.com
imap.nokiamail.com
smtp.nokiamail.com
nokia.pop.mail.yahoo.com
nokia.smtp.mail.yahoo.com
Solved!
Go to Solution.

For anyone who is having issues connecting your OVI mail with Outlook 2013, this is the way to set it up as below. For some reason, as of the date of this post, Outlook 2013 will not automatically pull the settings and the traditional settings that we used to use, did not work.
note: the windows mail version, which is the applications version on the tiles screen, works without issue. this is specifically for OUTLOOK 2013.
Then clock on More Settings...
once this is complete, just click on OK and then continue through and you should have your OVI mail working.

Problems today with Ovi email form - fixed!

Hi all,
there have been several posts here today informing that Ovi support emails have been bouncing back.
The Ovi Support team has informed us that there were indeed some problems with the emails, but they have been fixed and the emails should now be promptly delivered to Ovi Support.
For personal support with Ovi services, please go to
http://www.ovi.com/services/support => Contact Us.
I wrote all my posts from 2005-2011 as an "Admin" for this community. I still work for Nokia as an external consultant, so my rank in all posts is now "Employee".

psychomania wrote:
we help improve our call customer.
Psycho - I hope you just used Google translate there and the original Spanish text is a bit more fluent
Getting a Spanish survey from an English website is of course silly and I'm sure the Ovi Support team will look into that.
Slashd0t, I hope you get your issue solved soon.
edit: Google Translate actually does a pretty impressive job:
"We have received your question and we'll reply as soon as possible. Please keep
this email in order to evaluate our solutions once it receives the response. You
only have to answer a brief survey of satisfaction found in the following link:
http://digiumenterprise.com/answer/?sid=224295&chk=ECMY5ZMH
Thanks
in advance for your time and your feedback will help us to improve our customer
service."
Message Edited by vandelay on 05-Jun-2009 10:19 AM
I wrote all my posts from 2005-2011 as an "Admin" for this community. I still work for Nokia as an external consultant, so my rank in all posts is now "Employee".

My iphone 3g stays on the apple logo for about 4 minutes then flashes white and goes back to the apple screen, it repeats untill battery is flat, every now and then im lucky enough to get it to turn on but not very often and then it freezes and repeats??

hello my name is kirstie, i updated to firmware 4.2.1 .....my iphone 3g stays on the apple logo for about 4 minutes then flashes white and goes back to the apple screen, it repeats untill battery is flat, every now and then im lucky enough to get it to turn on but not very often and then it freezes and repeats the same problem?? (if i turn the phone off my pressing the two buttons it wont keep rebooting, its only when i leave it after turning it on)
I have reset the phone, full firmware restore, even downgraded back from firmware 4.2.1 to .3.1.3 official by using dfu mode and still doesnt fix.
(i correctly got out of dfu mode after the downgrade)
i can enter dfu mode and recovery, and update through itunes with no problem, but it doesnt fix the problem,
i have searched and found no answer to this problem, every option availible to try that i know of i have tried and failed. i dont care about preserving my content i just want a fix. i have a good understanding how to operate software on a computer and shouldnt be too confused by any advice given, so plz even if the answer is very complex i wish to try anything, please help me to get my iphone working.

Anyone have any suggestions? or is everyone else just as clueless as me !

HT201412 After ios7, My iphone4 has gone dead twice in a time frame of around two months...even though its not happening very often but a two month Old phone going dead just after a New update is not acceptable.probably ios7 still has sum bugs dat need to

After ios7, My iphone4 has gone dead twice in a time frame of around two months...even though its not happening very often but a two month Old phone going dead just after a New update is not acceptable.probably ios7 still has sum bugs dat need to be fixed...Can this bug expected to be fixed in the next update...

Hi 1283ar.
Unfortunately, iOS 7 is too hard to push for the iPhone 4 and therefore has a lot of effects turned off to try to get it to run as smoothly as possible.
However, it becomes better and better with each update coming but it's hard to do anything about the hardware on an already released phones.
If you still have trouble or think they are too hard. My tip is, if so, to restore your iPhone 4 and make a clean setup with no iCloud backup. But all your photos in a photostream so you can access it later.

Hello Simple problem - don,t know how to solve it. With Premiere CC when I try to do a selection (click... drag... release the click) very often it stop way before the end of the move I'm swinging the Magic Mouse. I taught that the mouse clicking was de

Hello
Simple problem - don,t know how to solve it.
With Premiere CC when I try to do a selection (click... drag... release the click) very often it stop way before the end of the move I'm swinging the Magic Mouse. I taught that the mouse clicking was defective and went to get a new Magic Mouse after lots of frustration. Today, I have an edit to do it it does the SAME thing !!
I was like ????#$%?&*(???
Opened all the lights and taught I've trow the new mouse to the garbage and was using the defective mouse again... no !! - ??
Actually, the bran new mouse is doing the same thing. What I understand after investigating on the motion and watching carefully my fingers !! - is that when I click I have to keep my finger at the EXACT same place on the mouse... drag and release and it's fine. If I click by pushing on the mouse and my finder is moving of a 1/32th of a millimeter, it will release and my selection will be to redo. You can understand my frustration ! - 75$ later... same problem, but I know that if I click with about 5 pounds of pressure and trying to pass my finger through the plastic of the mouse, it you stay steady and make it !
The problem is that scrolling is enable while clicking and it bugs.
How to disable it ??
Simple question - can't find the answer !

Helllooo !?
sorry but the Magic Mouse is just useless with the new Adobe Premiere CC and since I'm not the only one but can't find answer this is really disappointing. This mouse is just fantastic and now I have to swap from a USB mouse to the Magic Mouse every times I do some editing. My USB mouse if hurting my hand somehow and I want to got back to the Magic Mouse asap. Please - for sure there is a simple solution !
Thanks !!

Iphone4 fails to connect to AppleTV very often

hi..my iphone4 fails to connect to my AppleTV very often. Sometimes it gets connected without i doing anything. Sometimes even if try connecting through the i remote, it looks for the Apple TV and then says turn on Home Sharing. My Home sharing is always on. Funny thing is sometimes when i open you tube etc, it already shows the Airplay icon. Other times (When i really need it), the Air Play icon is missing....Pls help.

A Gen4 TC should not run too hot.. yes, when backing up with the disk running for extended periods then they do run pretty hot.. but once the disk spins down they should cool off..
Is the disk spinning down?? Stick your hand on it and feel... stick your ear over the fan area.. right behind the power socket and listen if the fan is running.. on a gen4 it should.
Raise the TC on pencils or chop sticks or erasers or bottle tops.. make sure it doesn't sit on the bench.
If you are running the latest firmware.. go back. In fact on a 12month old TC you might be able to go back to 7.5.2 firmware. (hold the option key when you select firmware updates, to show all possible updates and downgrades.)
The latest firmware offers nothing but trouble.. for the vast majority of people.
Do you still have AppleCare on a computer.. that will cover your TC as well. Take it back to Apple if you are worried..
There is no difference whatsoever between the two model TC except the size of the drive.

My older mac book pro and iMac are both running 10.6.8 and both have started running safari and email VERY slowly. My new mac book pro running 10.9 is having no issues. Is anyone else experiencing these issues?

My older mac book pro and iMac are both running 10.6.8 and both have started running safari and email VERY slowly. My new mac book pro running 10.9 is having no issues. Is anyone else experiencing these issues?

No noticeable speed differences running the four latest OSs on my machine.

Adobe Reader 11 stops working very often since installation of latest 11.0.8 patch (on many company workstations)

Hi,
i am a system administrator of a company with about 350 desktops.
We updated our client workstations (W7PROx64) from Adobe Reader 11.0.7 to Adobe Reader 11.0.8 and now some users complain that the adobe reader stops working very often (Quote: "Every 5th PDF i open, the adobe reader crashes").
Before we distribute the update from 11.0.7 to 11.0.8 there were no such complains...
Is this a "well known" problem ?
Greetings from germany
Thomas

There is no support for the free Adobe products, unless you have a corporate support agreement.
Regarding your problem: does it go away if you disable Protected Mode [Edit Preferences | Security (Enhanced)]? If it does, you can use this registry script to disable it quickly on multiple workstations: https://files.acrobat.com/a/preview/82c09ef4-f32e-4d41-97f3-74d9431f9f20

Hello, I have a problem, my computer is interrupted very often CAN I changed Maveric when working and 15 times a day is very disturbing and nustiu what I do is not only blocking and restarts

hello,
I have a problem, my computer is interrupted very often CAN I changed Maveric when working and 15 times a day is very disturbing and nustiu what I do is not only blocking and restarts

If you are getting Kernel Panics, this article (available in many languages) will explain how to find the reports. You can post the latest one here for Readers to help you:
How to Log a Kernel Panic

My MacBook Pro gets very slow while doing work like watching movies and using net .. video gets lag very often

My MacBook Pro gets very slow while doing work like watching movies and using net .. video gets lag very often and while surffing on net it gets very slow ...

First, back up all data immediately, as your boot drive might be failing.
There are a few other possible causes of generalized slow performance that you can rule out easily.
Reset the System Management Controller.
If you have many image or video files on the Desktop with preview icons, move them to another folder.
If applicable, uncheck all boxes in the iCloud preference pane.
Disconnect all non-essential wired peripherals and remove aftermarket expansion cards, if any.
Check your keychains in Keychain Access for excessively duplicated items.
Boot into Recovery mode, launch Disk Utility, and run Repair Disk.
Otherwise, take the steps below when you notice the problem.
Step 1
Launch the Activity Monitor application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad. Click Utilities, then Activity Monitor in the icon grid.
Select the CPU tab of the Activity Monitor window.
Select All Processes from the menu in the toolbar, if not already selected.
Click the heading of the % CPU column in the process table to sort the entries by CPU usage. You may have to click it twice to get the highest value at the top. What is it, and what is the process? Also post the values for % User, % System, and % Idle at the bottom of the window.
Select the System Memory tab. What values are shown in the bottom part of the window for Page outs and Swap used?
Next, select the Disk Activity tab. Post the approximate values shown for Reads in/sec and Writes out/sec (not Reads in and Writes out.)
Step 2
If you have more than one user account, you must be logged in as an administrator to carry out this step.
Launch the Console application in the same way you launched Activity Monitor. Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
View ▹ Show Log List
from the menu bar.
Select the 50 or so most recent entries in the log. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V). You're looking for entries at the end of the log, not at the beginning.
When posting a log extract, be selective. Don't post more than is requested.
Please do not indiscriminately dump thousands of lines from the log into this discussion.
Important: Some personal information, such as your name, may appear in the log. Anonymize before posting. That should be easy to do if your extract is not too long.

Ovi email very often bouncing

Similar Messages

Maybe you are looking for