Ovi maps and Nokia Maps

I have recently downloaded the ovi maps update for free navigation on my 5800 however now I seem to have 2 programs in my installed apps menu, Ovi maps and Nokia maps. This is causing me some problems as my phones built in memory is now completely full and I am unable to do some things as I have ran out of on phone memory space. Which one is the main map software? And also can I uninstall one? If not then can it be installed on a MSD card and if yes how?

As far as I can determine Ovi maps is the mapping software (program) which installs to C (phone memory) and Nokia maps is the map data that you have loaded which I believe are installed to E (mass memory).
I can confirm that you do need both installed.
The problem as far as I can see is that the previous maps versions 3.01 is built into the current firmware (v20 for N97 - not sure for 5800) and installing maps 3.03 does not remove or overwrite the earlier version so you end up with both versions installed and thus the extra memory footprint.
This will remain a problem until a newer firmware is released which will hopefully have maps 3.03 (or later depending when next firmware is released) thus reducing the extra 9 megs or so used.
Hope this answers your question
Message Edited by rider5512 on 29-Jan-2010 05:16 AM
Rider5512

Similar Messages

Ovi Maps and Nokia Maps - do I need both?

I am sure this question has been asked already but I cannot find it having spent some time doing a search.
The question is do I need both or can I dispense with one? If so, with what consequences?
The position is that I tried to update Ovi maps but couldn't because there was insufficient space on drive C, so I thought I would delete it and then I would be able to install the new version. Unfortunately wrong again - still insufficient space on drive C. Hence my question - do I need both maps? Life would be easier just with Nokia maps in the circumstances.

Thanks. Can I take it that Nokia Maps is pre-installed? Would I be correct in concluding that I can delete Ovi Maps to save space and just update Nokia Maps from time to time?
If Nokia Maps is not updated from time to time I would need to install Ovi Maps to keep up-to-date?
I have I think deleted Ovi Maps but I still have Maps. In fact I am fairly certain I have all the maps I downloaded from OVi Maps. When I run Maps the screen refers to "Ovi Maps". Perhaps I haven't uninstalled Ovi Maps at all although the programme said that I had! Perhaps it is Ovi Maps that is pre-installed.
Sorry but I remain confused and hope I can through this tread clear it up once and for all.

Diff b/w msg mapping and interface mapping

hi
i have some doubt's:
1. diff b/w msg mapping and interface mapping
2. What is product in SLD? usually who creates the product,technical,business system??
thx in advance..

hI Smartsoft General User ,
The following r excellent websites on mapping which differentiate msg mapping and interface mapping in detail:
Excellent PDF Document on Mapping
http://help.sap.com/bp_bpmv130/Documentation/Operation/MappingXI30.pdf
Mapping Development with the ABAP Workbench
http://help.sap.com/saphelp_nw04/helpdata/en/10/5abb2d9df242f6a62e22e027a6c382/content.htm
ABAP Mappings
http://help.sap.com/saphelp_nw04/helpdata/en/ba/e18b1a0fc14f1faf884ae50cece51b/content.htm
how to create a flat file out of an IDoc-XML by means of an ABAP mapping program and the J2EE File Adapter.
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/46759682-0401-0010-1791-bd1972bc0b8a
How to Use ABAP Mapping in XI 3.0
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/e3ead790-0201-0010-64bb-9e4d67a466b4
These r excellent websites in SLD:
How ToHandle the SLD for SAP XI
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/9e76e511-0d01-0010-5c9d-9f768d644808
How ToHandle Caches in SAP XI 3.0
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/docs/library/uuid/1a69ea11-0d01-0010-fa80-b47a79301290
http://www.sap-press.de/download/dateien/751/sap_press_exchange_infra_engl.pdf
cheers!
gyanaraj
****Pls reward points if u find this helpful

Java Mapping and Graphical Mapping

Hi All,
Could any one clarifies the situation where we need to write in a same interface ,
Both Java mapping and Graphical mapping.
Regards,
venu.

Hi,
Here is a scenario where you might need to use both graphical and user defined functions.
source: <fname> <lname> <filename>
target: <name> <filetype>
Suppose, you need to concatenate fname and lname into the target <name> tag, you could use the normal graphical mapping using the concat function.
<fname>\
concat <name>
<lname>/
next, if we need to extract only the filetype from the filename, for example, if we have filename.txt... and we want only the value .txt, we need to write a user defined function which would achieve this for u, since there are no inbuilt function which can solve this for you in graphical mapping.
Further XSLT mapping comes into picture when we need to create the entire target xml structure. Again, graphical mapping would not be useful here.
Regards,
Smitha.

XI 7.0 passing attributes between java mapping and message mapping

Hi all,
Here's a newbie question. There is a scenario where an interface mapping has several stages of java mapping and message mapping
I would like to know how to set attributes in the java mapping so that it can be accessed in a message map (or vice versa). What I intend to do is pass some information from one mapping to the other so that action can be taken based on the values passed.
Thank you!

Another option is storing the values in the message header in the same way as the Adapter-Specific Message Attributes:
http://help.sap.com/saphelp_nw04/helpdata/en/43/09b16006526e72e10000000a422035/frameset.htm
Just use your own name/namespace combination, which is not used in any adapter.
If possible use the way that Sandro proposed and add the information which you need to additional tags in the payload.
Regards
Stefan

Horizontal Mapping and Flat mapping with Metadata Value Indicator

Hi
I have an abstract class B which itself extends another abstract class A.
There is no table for A. The fields in A are mapped to B. I believe this
is called "horizontal mapping"
C and D inherit off B. There's a also a table named B (mapped to class B),
but none for C or D. Instances of C and D are recorded in table B. I
believe this is called "flat mapping"
B has a field foo whose possible values are 'fred' and 'wilma'.
If foo='fred', then the record is of type C
If foo='wilma', then the record is of type D
I believe this is called "class indicator" of type metadata.
To express this, I have package.jdo which says
<class name="A"/>
<class name="B" persistence-capable-superclass="A"/>
<class name="C" persistence-capable-superclass="B"/>
<class name="D" persistence-capable-superclass="B"/>
In B.mapping, I have
<mapping>
<package name="domain">
<class name="B">
<jdbc-class-map type="horizontal"/>
<jdbc-class-ind type="metadata-value" column="foo"/>
</class>
</package>
</mapping>
B.java has a private String foo.
In C.mapping, I have
<mapping>
<package name="domain">
<class name="C">
<jdbc-class-map type="flat"/>
<jdbc-class-ind-value value="fred"/>
field mappings for C
</class>
</package>
</mapping>
and similarly in D for value='wilma'
My questions are...
1. Is this kind of mapping supported by kodo?
2. If so, is this configuration correct? I guess not, since I don't
specify the table name anywhere. Where should it go?
3. If I remove the "class indicator" mapping and run a simple test I get
kodo.util.FatalUserException: There is no superclass mapping for mapping
for "class domain.D".
     at
kodo.jdbc.meta.FlatClassMapping.assertParentMapping(FlatClassMapping.java:49)
     at kodo.jdbc.meta.FlatClassMapping.getTable(FlatClassMapping.java:85)
     at
kodo.jdbc.meta.OneToManyFieldMapping.fromMappingInfo(OneToManyFieldMapping.java:87)
     at
kodo.jdbc.meta.RuntimeMappingProvider.getFieldMapping(RuntimeMappingProvider.java:160)
     at
kodo.jdbc.meta.MappingRepository.getFieldMapping(MappingRepository.java:443)
     at
kodo.jdbc.meta.AbstractClassMapping.getFieldMapping(AbstractClassMapping.java:949)
4. If I run a simple test with the horizontal, flat and class-indicator
mappings, I get
kodo.jdbc.meta.MappingInfoNotFoundException: The "class-column"
attribute/extension for the class indicator on type
"domain.B.<class-indicator>" is missing or names a column that does not
exist.
     at kodo.jdbc.meta.Mappings.invalidMapping(Mappings.java:135)
     at kodo.jdbc.meta.Mappings.invalidMapping(Mappings.java:121)
     at
kodo.jdbc.meta.ColumnClassIndicator.fromMappingInfo(ColumnClassIndicator.java:95)
     at
kodo.jdbc.meta.RuntimeMappingProvider.initialize(RuntimeMappingProvider.java:135)
     at
kodo.jdbc.meta.MappingRepository.getMappingInternal(MappingRepository.java:378)
What am I doing wrong?
Thanks in advance
Srini

I solved this problem by removing the identifier field from the
class/mapping (kodo support).
Thanks
Srini
Stephen Kim wrote:
Do you have two fields mapped to the same column? Did you make sure you
set everything which maps to the column?
Srinivasan Ranganathan wrote:
I found what was wrong with this, fixed it and got a different (more
sensible) error. To correct this mapping, I specified B's mapping type as
"base" and gave its table and pk names. Also, I moved the common field
mappings to B.mapping so C.mapping and D.mapping only have fields that are
specific to each.
Now when I run a simple test, I get
testC:
kodo.util.FatalUserException: Attempt to set column "B.FOO" to two
different values: (java.lang.Object)"java.lang.Object@2f608ac2",
(java.lang.String)"fred" This can occur when you fail to set both sides of
a two-sided relation between objects, or when you map different fields to
the same column, but you do not keep the values of these fields in synch.
     at kodo.jdbc.runtime.VRow.setObjectInternal(VRow.java(Compiled Code))
     at kodo.jdbc.sql.AbstractRow.setObject(AbstractRow.java(Compiled Code))
     at
kodo.jdbc.meta.ColumnClassIndicator.insert(ColumnClassIndicator.java:143)
     at kodo.jdbc.runtime.UpdateManagerImpl.insert(UpdateManagerImpl.java:216)
     at kodo.jdbc.runtime.UpdateManagerImpl.insert(UpdateManagerImpl.java:219)
     at kodo.jdbc.runtime.UpdateManagerImpl.flush(UpdateManagerImpl.java:108)
     at kodo.jdbc.runtime.UpdateManagerImpl.flush(UpdateManagerImpl.java:73)
testD:
kodo.util.FatalUserException: Attempt to set column "B.FOO" to two
different values: (java.lang.Object)"java.lang.Object@2f608ac2",
(java.lang.String)"wilma" This can occur when you fail to set both sides
of a two-sided relation between objects, or when you map different fields
to the same column, but you do not keep the values of these fields in
synch.
     at kodo.jdbc.runtime.VRow.setObjectInternal(VRow.java(Compiled Code))
     at kodo.jdbc.sql.AbstractRow.setObject(AbstractRow.java(Compiled Code))
     at
kodo.jdbc.meta.ColumnClassIndicator.insert(ColumnClassIndicator.java:143)
     at kodo.jdbc.runtime.UpdateManagerImpl.insert(UpdateManagerImpl.java:216)
     at kodo.jdbc.runtime.UpdateManagerImpl.insert(UpdateManagerImpl.java:219)
     at kodo.jdbc.runtime.UpdateManagerImpl.flush(UpdateManagerImpl.java:108)
     at kodo.jdbc.runtime.UpdateManagerImpl.flush(UpdateManagerImpl.java:73)
I've checked for the two possible errors to the best of my knowledge. Any
input to resolve this issue is appreciated.
Thanks in advance
Srini
Srinivasan Ranganathan wrote:
Hi
I have an abstract class B which itself extends another abstract class A.
There is no table for A. The fields in A are mapped to B. I believe this
is called "horizontal mapping"
C and D inherit off B. There's a also a table named B (mapped to class B),
but none for C or D. Instances of C and D are recorded in table B. I
believe this is called "flat mapping"
B has a field foo whose possible values are 'fred' and 'wilma'.
If foo='fred', then the record is of type C
If foo='wilma', then the record is of type D
I believe this is called "class indicator" of type metadata.
To express this, I have package.jdo which says
<class name="A"/>
<class name="B" persistence-capable-superclass="A"/>
<class name="C" persistence-capable-superclass="B"/>
<class name="D" persistence-capable-superclass="B"/>
In B.mapping, I have
<mapping>
<package name="domain">
<class name="B">
<jdbc-class-map type="horizontal"/>
<jdbc-class-ind type="metadata-value" column="foo"/>
</class>
</package>
</mapping>
B.java has a private String foo.
In C.mapping, I have
<mapping>
<package name="domain">
<class name="C">
<jdbc-class-map type="flat"/>
<jdbc-class-ind-value value="fred"/>
field mappings for C
</class>
</package>
</mapping>
and similarly in D for value='wilma'
My questions are...
1. Is this kind of mapping supported by kodo?
2. If so, is this configuration correct? I guess not, since I don't
specify the table name anywhere. Where should it go?
3. If I remove the "class indicator" mapping and run a simple test I get
kodo.util.FatalUserException: There is no superclass mapping for mapping
for "class domain.D".
     at
kodo.jdbc.meta.FlatClassMapping.assertParentMapping(FlatClassMapping.java:49)
     at kodo.jdbc.meta.FlatClassMapping.getTable(FlatClassMapping.java:85)
     at
kodo.jdbc.meta.OneToManyFieldMapping.fromMappingInfo(OneToManyFieldMapping.java:87)
>>
     at
kodo.jdbc.meta.RuntimeMappingProvider.getFieldMapping(RuntimeMappingProvider.java:160)
>>
     at
kodo.jdbc.meta.MappingRepository.getFieldMapping(MappingRepository.java:443)
     at
kodo.jdbc.meta.AbstractClassMapping.getFieldMapping(AbstractClassMapping.java:949)
>>
>>
>>
>>
4. If I run a simple test with the horizontal, flat and class-indicator
mappings, I get
kodo.jdbc.meta.MappingInfoNotFoundException: The "class-column"
attribute/extension for the class indicator on type
"domain.B.<class-indicator>" is missing or names a column that does not
exist.
     at kodo.jdbc.meta.Mappings.invalidMapping(Mappings.java:135)
     at kodo.jdbc.meta.Mappings.invalidMapping(Mappings.java:121)
     at
kodo.jdbc.meta.ColumnClassIndicator.fromMappingInfo(ColumnClassIndicator.java:95)
>>
     at
kodo.jdbc.meta.RuntimeMappingProvider.initialize(RuntimeMappingProvider.java:135)
>>
     at
kodo.jdbc.meta.MappingRepository.getMappingInternal(MappingRepository.java:378)
>>
>>
>>
What am I doing wrong?
Thanks in advance
Srini
Steve Kim
[email protected]
SolarMetric Inc.
http://www.solarmetric.com

Class-Map and Policy-Map Configuration in CM Confusion

Hi,
I'm implementing a green field WAAS deployment for a customer. We currently have a Proof-of-Concept up and running.
I've got some questions regarding custom class-map and policy-map configuration in the CM. I'd like to nail-down the custom class-map and policy-map configuration (and understanding) in the PoC before cutting over the PoC branches to the production WAAS environment.
Assuming a typical WAAS Deployment using WCCP for off-path interception, branch to DC.
==> 61 in LAN (BRANCH ROUTER) <== 62 in WAN (WAN CLOUD) ==> 61 in WAN (DC ROUTER) <== 62 in LAN
We are using two distinct device groups, BRANCH and DATA CENTER.
If the customer has traffic that we need to classify in order to provide TFO only optimisation, should the single class-map include the traffic in both directions? Ie., (assume the SERVER is 10.1.1.1 TCP Port 443). Should the class-map be configured as:
Class-Map
Line 1: DST IP 10.1.1.1 DST Port 443
Line 2: SRC IP 10.1.1.1 SRC Port 443
Or in this case is only the DST line required? And in which Device Group should the custom policy be applied? Or should it be applied to both Device Groups? If it should be applied to both Device Groups, then would it make more sense to have the policy-map in the Branch DG configured to match the DST traffic, and on the Data Center DG have a different class-map match the SRC traffic?
My confusion is how to classify the traffic (SRC or DST or Both - Separate classes for each or different lines within the same class-map), and where to apply the appropriate policy (both Device Groups, just Branch, just DC) and why...
I tried to apply a custom policy and the impact in the PoC was that the TCP Summary report stopped reporting the individual traffic classes showed 'other traffic' only. Can anyone explain why this may have occurred?
I hope this makes sense.

for instance like this:
policy-map police-in
class class-default
police rate 10 mpbs <optionally set burst>
policy-map shape-out-parent
class class-default
shape 10 mpbs <optional burst config>
service-policy shape-out-child
policy-map shape-out-child
class class-default
queue-limit 10 packets
int g 0/0/0/0
service-policy police-in in
service-policy shape-out-parent out
also have a look at CL 2013/2014 (orlando/sanfran) ID 2904 for more QOS details
and the support forum article of "asr9000 quality of service architecture"
xander

Service map and workset map iview

Can any one please provide me with a good documentation for creating Service map and workset maps in SPA portal.

Hi Raj,
Before posting for documentation help, just browse through help.sap.com, you could find really valuable help there.
For your reference some of the useful links are as below -
[Navigation using Workset Map iView|http://help.sap.com/saphelp_nw70/helpdata/en/ae/ed9576d3e94ec9b440dfe3a8db9cbf/content.htm]
[Creating Workset Map iView|http://help.sap.com/saphelp_nw70/helpdata/en/84/f8c4400c2d712ae10000000a155106/content.htm]
[Navigation using Service Map iView|http://help.sap.com/saphelp_nw70/helpdata/en/a1/c64960cb1e4c4293ce6d8eaed02ff5/content.htm]
[Creating Service Map iView|http://help.sap.com/saphelp_nw70/helpdata/en/5b/bc12311911458993849a91f3f20dec/content.htm]
Hope these help you out
Regards,
Shailesh

Message Mapping And Interface Mapping

Hi,
I have 2 software components.
One is for sender and one is for receiver.I have created all the Data types,Message type and Message Interface fro sender in the first Software component and data types ,message type ,message interface for the receiver in the second software component .
Now, in which Software component should i create Message Mapping and Interface Mapping?
Thanks in Advance,
mvk

Hi,
You could use the created Message type and Message interfaces in Sender as well as receiver software components for creating message mapping, interface mapping and integration scenario.
Generally it makes sense to maintain the message mapping, interface mapping and integration scenario in receiver software component. The message mapping and Integration scenario is specifically based on the receiver end requirments, so its preffered on receiver software component.
The sender side details could be reusable in case if you need those for another new receiver software component. If you maintain it in sender component, then that will lead to mix-up all the things on sender side even though its based on receiver end.
I think this could help you.
In PI7.1 now there is concept of Folders to maintain all the interfaces appropriatly and leads for reusability of existing objects.
Please refer below links for more details,
/people/thorsten.nordholmsbirk/blog/2006/07/25/structuring-integration-repository-content--part-1-software-component-versions
http://help.sap.com/saphelp_nw04/helpdata/en/42/ed903cf6c4492ce10000000a114084/frameset.htm
Thanks
Swarup
Edited by: Swarup Sawant on Jan 26, 2008 8:33 AM

Hi , friends pls explain abap mapping and message mapping

1) pls explain abap mapping and message mapping
send me screen shorts also.

Hi
Mapping Techniques
XI provides 3 standard ways of interface mapping between source and target.
Graphical mapping
Java Mapping
XSLT Mapping
Two more additional mapping types can be activated in XI by making changes to the exchange profile. Those two mappings are
ABAP mapping
XSLT mapping with ABAP Extensions
Graphical Mapping
Graphical mapping is a common approach followed by everyone for generating desired target structure. It involves simple drag-n-drop to correlate respective nodes (fields) from source and target structure. It hardly involves coding. (Exception - User defined functions). But sometimes with graphical mapping it is difficult to produce required output. For example ... text/html output, namespace change, sorting or grouping of records etc.
ABAP Mapping
A person comfortable with Object Oriented ABAP can go for ABAP mapping instead.
Java Mapping
Java Mapping uses 2 types of parsers. DOM and SAX. DOM is easier to use with lots of classes to help you create nodes and elements, but , DOM is very processor intensive.
SAX parser is something that parses your XML one after the other, and so is not processor intensive. But, it is not exaclty easy to develop either.
XSLT Mapping
One can also think of Java mapping as another option but it is a bit complex and required knowledge of Java. In such cases, XSLT mapping can be the best approach to meet the requirements.
A few example cases in which an XSLT mapping can be used:-
When the required output is other than XML like Text, Html or XHTML (html displayed as XML)
When default namespace coming from graphical mapping is not required or is to be changed as per requirements.
When data is to be filtered based on certain fields (considering File as source)
When data is to be sorted based on certain field (considering File as source)
When data is to be grouped based on certain field (considering File as source)\
Advantages of using XSLT mapping
XSLT program itself defines its own target structure.
XSLT programs can be imported into SAP XI. Message mapping step can be avoided. One can directly go for interface mapping once message interfaces are created and mapping is imported.
XSLT provides use of number of standard XPath functions that can replaces graphical mapping involving user defined java functions easily.
File content conversion at receiver side can be avoided in case of text or html output.
Multiple occurrences of node within tree (source XML) can be handled easily.
XSLT can be used in combination with graphical mapping.
Multi-mapping is also possible using xslt.
XSLT can be used with ABAP and JAVA Extensions.
Disadvantages of using XSLT mapping
Resultant XML payload can not be viewed in SXMB_MONI if not in XML format (for service packs < SP14).
Interface mapping testing does not show proper error description. So errors in XSLT programs are difficult to trace in XI but can be easily identified outside XI using browser.
XSLT mapping requires more memory than mapping classes generated in Java.
XSLT program become lengthier as source structure fields grows in numbers.
XSLT program sometimes become complex to meet desired functionality.
Some XSL functions are dependent on version of browser.
Different types of Mappings
MAPPING SUPPORTED BY XI
Message Mapping -> Graphical Design and testing environment. Default Provided By XI. Queue based modelling allow handling or large documents. Extensible via user defined functions
XSLT Mapping - > Based on openstandard, Portable across application platform, Extensible using user defined functions kewl but disadvantage is Memory overload while handling large documents.
SAX -> Simple Api For XML. -> Allows you to parse through a XML document. Doesn't consume any memory. But the message can be parsed only once from top to bottom. It Has evolved by contributions made by group of ppl itz a open architecture.
DOM -> Document Object Model -> Itz designed by W3C. Consumes Memory as the message will be loaded. Allows parsing of document in both way top down and bottom up.
Send me your email id.Shall send you very good docs for both ABAP Mapping and message mapping.
Thanks

Driving times vary from Maps and Google maps?

When I plot a trip I find driving times vary significantly from Maps and Google maps. I wonder what the paramieters are for attaching driving times to routes? I would hope that it were speed limits.

Basically it is average driving time. Speed limits is a factor but so is congestion, terrain, weather, construction, etc. Since Apple and Google get their data from different sources, the results are always going to be different.

E 66 and Nokia map

I tried to uninstall the old map from E66 but I couldnt and I wanted to install the new OVI map 3 into it
Can someone explain to me how I should delete the old map and install the new one ... I tried to delet it from memory card but i couldnt see it there
Please help me as soon as possible
Thanks

Instructions for downloading and installing are available from here.
http://europe.nokia.com/explore-services/ovi-maps/downloads-and-services
Message Edited by cjlim on 17-Nov-2009 09:25 AM

Maps and nokia n73

Hi, I recently had to reset my nokia n73 after a long time, then I noticed it can't afford the OVI version of Maps - it used to run the first Maps release, the "Nokia pc suite", which I can't find anywhere.
Is there really no way I can install a (whatever) version of Maps? Thank you

except that, in my opinion, the size of the application and the maps would weigh down the whole system, last time I installed it with no issues on the memory card
However, I got rid of that problem (I just changed the sms storage location to the memory card) but now I get an error message that's like (I'm Italian and so is the mobile language) "Unable to install!". And it comes before the choice about whether to install the application locally or on the sd

Big Headache with N70 and nokia maps

I have recently come accross nokia maps and i think it is such an excelent idea. But when i was following the steps on how to get downloaded maps on to my n70 i hit a big brick wall. Suposedly i need to put my phone into data mode, and as i have found that is not an option. I also know that i would work if i had a mmc card reader. unfortunately i dont.
so is there any type of work around for this problem.
plz help as i am not the only 1 with this problem

or even better intergrate this into pc suit so that no matter how it is connected. you will always be able to use maps. Nokia have an excelent idea here but they havn't quite got it right. SO TO THE NOKIA PEOPLE OUT THERE, ANSWER THE EMAILS I SENT YOU OR POST SOMETHING ON THIS TOPIC plz

E71 and Nokia Maps

I am trying to compare the 2 Satnav systems on my phone......
Vodafone SatNav gives me 18 month subscription with voice navigation
Nokia Maps giives me 3 month subscription withOUT voice nav. (I am only a week or so into the 3 months)
If I go to download voice it prompts me to pay but doesnt say how much ??
Isnt there voice trial ubscription ??

The next time you try, when you get the prompt to pay, just click on the update option. All Nokia Subscriptions come with voice and so should yours. ALl you need to do is to update your license details by clicking on the update option.
You have to be online to allow Nokia Maps to access the license server when doing this.
Message Edited by cjlim on 24-Jan-2009 03:56 PM

Ovi maps and Nokia Maps

Similar Messages

Maybe you are looking for