OVI Suite not connecting to map server - NOT SOLVE...

Because this /t5/Nokia-Ovi-Suite/OVI-Suite-not-connecting-to-map-server/td-p/708275 discussion has been marked as solved and it's not. I wonder when we'll have any feedback from Nokia Support? It must be the new Nokia Ovi Suite causing the problem because we all have the same problems. I have tried on three different computers with good stable internet connections and get the "connection timed out" error on all of them. Using Nokia 5230 and have tried both on XP and Vista. 

@mokrypes
This seems to be working now. I tried today to download US maps and it completed and installed without any issues. Guess there was some problem with the map server.
Cheers
Sandy
Helpful information, then dont forget to hit the kudos star :-) Or say it accepted solution and thanks

Similar Messages

  • OVI Suite not connecting to map server

    After installing the latest NOKIA software updater, the OVI Suite is not connecting  to the map server. It stays: "Wait while retreiving the available maps..." for ever. I unistalled the updater, but the problem is still there. Any ideas to solve this?
    Solved!
    Go to Solution.

    Same problem with my Nokia X6 - "The connection to the Ovi Maps timed out". Now I have no maps
    Nokia, give us the old version of Ovi Suite - this one is a piece of **bleep**. I tested on 3 different computers and the problem appeared on each of them regardless that 1 of the computers was with Ovi Suite and PC Suite already installed, the other had only Ovi Suite installed and the third had nothing of the above installed.

  • Map Loader not connect to map server

    Hi there,
    i have a Problem with Nokia Map Loader. (it doenst matter which version, I tried . and 2.0 and 3.0)
    When i start the map loader i get this Problem:
    "Connection to the map server has been interrupted."
    I do not use any proxy.
    What is the solution of the Problem, i want to use my navigation on my Nokia e72 device
    kind regards

    Have you tried using OVI Suite which is now the recommended way of adding maps?
    Failing that as E72 uses OVI Maps v3.04 you could look at post by ovikovi to download maps directly: /t5/Maps-Navigation-and-GPS/newest-Nokia-Ovi-Maps-​0-1-25-114-manual-download/m-p/778870/highlight/tr​...
    Happy to have helped forum with a Support Ratio = 42.5

  • Ovi suite always connects thru the mobile, not dir...

    I am trying to update the software in my n8-00 to fix a connection problem. (so, I can't connect to internet at this stage thru my mobile) I installed the ovi suite and tried to update it (as mentioned in nokia site as an alternative to updating the nokia software using mobile phone itself) . Ovi suite doesn't connect to internet if the mobile is not connected. when the mobile is connected, it alsways connects thru the mobile. I want to update the ovi suite via the internet connection I already have in my laptop, which is thru the wireless lan. Can some body help me?

    If what you mean by 'fix a connection problem' is related to the internet on your mobile..call your operator and request them to send Aceess Points settings.. First delete all the existing Access points from the phone... and when the settings are received ( normally thru' SMS).. open the message and select 'SAVE'... Now see if your connection problem is resolved or not..( without any software update...)
    If not then again delete all the Access Points.. Now try the Software update thru' OVI suite.. Since the settings are deleted.. OVI Suite should use the Internet from the Laptop... Once done.. again open the SMS and select 'SAVE' to set the Access Points... 

  • EAS server error: Could not connect to administration Server

    Hi,
    I have installed Hyperion suite in Windows server 2008 R2. It was working fine but now when i tried to login in to the EAS console, I am getting the following error:
    "Server Error: Could not connect to administration server".
    I tried accessing the same through the web URL and I found "404 error - file or directory not found".
    I verified all my services are up and running fine. I am able to connect to the essbase sever through Excel as well as planning.
    The log retireved from the HyS9eas-sysout.log file is below:
    <Sep 11, 2013 7:06:56 AM JST> <Info> <Security> <BEA-090905> <Disabling CryptoJ JCE Provider self-integrity check for better startup performance. To enable this check, specify -Dweblogic.security.allowCryptoJDefaultJCEVerification=true>
    <Sep 11, 2013 7:06:57 AM JST> <Info> <Security> <BEA-090906> <Changing the default Random Number Generator in RSA CryptoJ from ECDRBG to FIPS186PRNG. To disable this change, specify -Dweblogic.security.allowCryptoJDefaultPRNG=true>
    <Sep 11, 2013 7:06:58 AM JST> <Info> <WebLogicServer> <BEA-000377> <Starting WebLogic Server with Oracle JRockit(R) Version R28.0.2-11-135406-1.6.0_20-20100624-2119-windows-x86_64 from Oracle Corporation>
    <Sep 11, 2013 7:07:04 AM JST> <Info> <Management> <BEA-141107> <Version: WebLogic Server 10.3.4.0  Fri Dec 17 20:47:33 PST 2010 1384255 >
    <Sep 11, 2013 7:07:15 AM JST> <Emergency> <Management> <BEA-141151> <The admin server could not be reached at http://localhost:7001.>
    <Sep 11, 2013 7:07:15 AM JST> <Info> <Configuration Management> <BEA-150018> <This server is being started in managed server independence mode in the absence of the admin server.>
    <Sep 11, 2013 7:07:15 AM JST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
    <Sep 11, 2013 7:07:15 AM JST> <Info> <WorkManager> <BEA-002900> <Initializing self-tuning thread pool>
    <Sep 11, 2013 7:07:16 AM JST> <Notice> <LoggingService> <BEA-320400> <The log file E:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EssbaseAdminServices0\logs\EssbaseAdminServices0.log will be rotated. Reopen the log file if tailing has stopped. This can happen on some platforms like Windows.>
    <Sep 11, 2013 7:07:16 AM JST> <Notice> <LoggingService> <BEA-320401> <The log file has been rotated to E:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EssbaseAdminServices0\logs\EssbaseAdminServices0.log00410. Log messages will continue to be logged in E:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EssbaseAdminServices0\logs\EssbaseAdminServices0.log.>
    <Sep 11, 2013 7:07:16 AM JST> <Notice> <Log Management> <BEA-170019> <The server log file E:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EssbaseAdminServices0\logs\EssbaseAdminServices0.log is opened. All server side log events will be written to this file.>
    <Sep 11, 2013 7:07:48 AM JST> <Notice> <Security> <BEA-090082> <Security initializing using security realm myrealm.>
    <Sep 11, 2013 7:07:56 AM JST> <Warning> <JTA> <BEA-110503> <The migrator(the AdminServer for manual JTA migration policy, or the Singleton Master for automatic JTA migration policy) is not available. Will skip JTA TRS failback because isStrictOwnershipCheck is [false]. This may lead to potencial TLOG corruption if TRS of EssbaseAdminServices0 has been migrated to backup server and the backup server is accessing the TLOG of EssbaseAdminServices0. More safety can be achieved by setting isStrictOwnershipCheck to [true].>
    <Sep 11, 2013 7:08:35 AM JST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STANDBY>
    <Sep 11, 2013 7:08:35 AM JST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to STARTING>
    Calling getConnection()
      return weblogic.management.jmx.mbeanserver.WLSMBeanServer@9830ac
    Calling getDomainConfiguration()
    Calling getConnection()
      return weblogic.management.jmx.mbeanserver.WLSMBeanServer@9830ac
    Calling getRuntimeService()
    Calling getConnection()
      return weblogic.management.jmx.mbeanserver.WLSMBeanServer@9830ac
      return com.bea:Name=RuntimeService,Type=weblogic.management.mbeanservers.runtime.RuntimeServiceMBean
      return com.bea:Name=EPMSystem,Type=Domain
    Calling getConnection()
      return weblogic.management.jmx.mbeanserver.WLSMBeanServer@9830ac
    Domain location is 'E:\Oracle\Middleware\user_projects\domains\EPMSystem'
    Calling getRuntimeService()
      return com.bea:Name=RuntimeService,Type=weblogic.management.mbeanservers.runtime.RuntimeServiceMBean
    Calling getConnection()
      return weblogic.management.jmx.mbeanserver.WLSMBeanServer@9830ac
    Calling getConnection()
      return weblogic.management.jmx.mbeanserver.WLSMBeanServer@9830ac
    Calling getConnection()
      return weblogic.management.jmx.mbeanserver.WLSMBeanServer@9830ac
    Calling getConnection()
      return weblogic.management.jmx.mbeanserver.WLSMBeanServer@9830ac
    Checking E:\Oracle\Middleware\user_projects\domains\EPMSystem\servers\EssbaseAdminServices0\registry_update.xml file
    EPM_ORACLE_HOME: E:\Oracle\Middleware\EPMSystem11R1
    Template for EAS#11.1.2.0: E:\Oracle\Middleware\EPMSystem11R1\common\templates\applications\epm_eas_11.1.2.1.jar
    Dependencies for E:\Oracle\Middleware\EPMSystem11R1\common\templates\applications\epm_eas_11.1.2.1.jar: [Oracle EPM Common, Oracle EPM Calcmgr, Oracle EPM Planning libraries, Oracle EPM EAS libraries, Oracle EPM Misc libraries, Oracle EPM Xerces libraries]
    BPMUI shared webapp not referenced from EAS#11.1.2.0
    Application name: EAS#11.1.2.0
    Application source: eas.ear
    Server name: EssbaseAdminServices0
    Server port: 10080
    Server SSL port: 10083
    Application context: eas
    Registry product type: ESSBASE_PRODUCT
    Registry physical web application type: ADMIN_SERVICES_WEB_APP
    weblogic.Name property is 'EssbaseAdminServices0', seems to be WebLogic mode
    registry.isRegistryDatabaseCreated()true
    Registry was initialized sucessfully
    Executing pre custom update for EAS#11.1.2.0
    EPM_ORACLE_INSTANCE: E:\Oracle\Middleware\user_projects\epmsystem1
    <Sep 11, 2013 7:09:06 AM JST> <Error> <Deployer> <BEA-149205> <Failed to initialize the application 'EAS [Version=11.1.2.0]' due to error java.lang.NullPointerException.
    java.lang.NullPointerException
    at java.io.File.<init>(File.java:222)
    at com.hyperion.hit.tool.deploy.update.util.RegistryHelper.createPhysicalWebApp(RegistryHelper.java:168)
    at com.hyperion.hit.tool.deploy.update.RegistryUpdater.update(RegistryUpdater.java:36)
    at com.hyperion.hit.tool.deploy.update.RegistryUpdateListener.preStart(RegistryUpdateListener.java:91)
    at weblogic.application.internal.flow.BaseLifecycleFlow$PreStartAction.run(BaseLifecycleFlow.java:282)
    Truncated. see log file for complete stacktrace
    Caused By: java.lang.NullPointerException
    at java.io.File.<init>(File.java:222)
    at com.hyperion.hit.tool.deploy.update.util.RegistryHelper.createPhysicalWebApp(RegistryHelper.java:168)
    at com.hyperion.hit.tool.deploy.update.RegistryUpdater.update(RegistryUpdater.java:36)
    at com.hyperion.hit.tool.deploy.update.RegistryUpdateListener.preStart(RegistryUpdateListener.java:91)
    at weblogic.application.internal.flow.BaseLifecycleFlow$PreStartAction.run(BaseLifecycleFlow.java:282)
    Truncated. see log file for complete stacktrace
    >
    <Sep 11, 2013 7:09:06 AM JST> <Emergency> <Deployer> <BEA-149259> <Server 'EssbaseAdminServices0' in cluster 'EssbaseAdminServices' is being brought up in administration state due to failed deployments.>
    <Sep 11, 2013 7:09:17 AM JST> <Notice> <Cluster> <BEA-000197> <Listening for announcements from cluster using unicast cluster messaging>
    <Sep 11, 2013 7:09:17 AM JST> <Notice> <Cluster> <BEA-000133> <Waiting to synchronize with other running members of EssbaseAdminServices.>
    <Sep 11, 2013 7:09:22 AM JST> <Warning> <Log Management> <BEA-170011> <The LogBroadcaster on this server failed to broadcast log messages to the admin server. The Admin server may not be running. Message broadcasts to the admin server will be disabled.>
    <Sep 11, 2013 7:09:48 AM JST> <Notice> <Security> <BEA-090171> <Loading the identity certificate and private key stored under the alias DemoIdentity from the jks keystore file E:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\DemoIdentity.jks.>
    <Sep 11, 2013 7:09:48 AM JST> <Notice> <Security> <BEA-090169> <Loading trusted certificates from the jks keystore file E:\Oracle\MIDDLE~1\WLSERV~1.3\server\lib\DemoTrust.jks.>
    <Sep 11, 2013 7:09:48 AM JST> <Notice> <Security> <BEA-090169> <Loading trusted certificates from the jks keystore file E:\Oracle\Middleware\jrockit_160_20\jre\lib\security\cacerts.>
    <Sep 11, 2013 7:09:48 AM JST> <Alert> <Security> <BEA-090152> <Demo trusted CA certificate is being used in production mode: [
      Version: V3
      Subject: CN=CACERT, OU=FOR TESTING ONLY, O=MyOrganization, L=MyTown, ST=MyState, C=US
      Signature Algorithm: MD5withRSA, OID = 1.2.840.113549.1.1.4
      Key:  Sun RSA public key, 512 bits
      modulus: 9550192877869244258838480703390456015046425375252278279190673063544122510925482179963329236052146047356415957587628011282484772458983977898996276815440753
      public exponent: 65537
      Validity: [From: Fri Mar 22 05:12:27 JST 2002,
                   To: Wed Mar 23 05:12:27 JST 2022]
      Issuer: CN=CACERT, OU=FOR TESTING ONLY, O=MyOrganization, L=MyTown, ST=MyState, C=US
      SerialNumber: [    33f10648 fcde0deb 4199921f d64537f4]
    Certificate Extensions: 1
    [1]: ObjectId: 2.5.29.15 Criticality=true
    KeyUsage [
      Key_CertSign
      Algorithm: [MD5withRSA]
      Signature:
    0000: 9D 26 4C 29 C8 91 C3 A7   06 C3 24 6F AE B4 F8 82  .&L)......$o....
    0010: 80 4D AA CB 7C 79 46 84   81 C4 66 95 F4 1E D8 C4  .M...yF...f.....
    0020: E9 B7 D9 7C E2 23 33 A4   B7 21 E0 AA 54 2B 4A FF  .....#3..!..T+J.
    0030: CB 21 20 88 81 21 DB AC   90 54 D8 7D 79 63 23 3C  .! ..!...T..yc#<
    ] The system is vulnerable to security attacks, since it trusts certificates signed by the demo trusted CA.>
    <Sep 11, 2013 7:09:48 AM JST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=thawte Primary Root CA - G3,OU=(c) 2008 thawte\, Inc. - For authorized use only,OU=Certification Services Division,O=thawte\, Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
    <Sep 11, 2013 7:09:48 AM JST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=T-TeleSec GlobalRoot Class 3,OU=T-Systems Trust Center,O=T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
    <Sep 11, 2013 7:09:48 AM JST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=T-TeleSec GlobalRoot Class 2,OU=T-Systems Trust Center,O=T-Systems Enterprise Services GmbH,C=DE". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
    <Sep 11, 2013 7:09:48 AM JST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=GlobalSign,O=GlobalSign,OU=GlobalSign Root CA - R3". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
    <Sep 11, 2013 7:09:48 AM JST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "OU=Security Communication RootCA2,O=SECOM Trust Systems CO.\,LTD.,C=JP". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
    <Sep 11, 2013 7:09:48 AM JST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=VeriSign Universal Root Certification Authority,OU=(c) 2008 VeriSign\, Inc. - For authorized use only,OU=VeriSign Trust Network,O=VeriSign\, Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
    <Sep 11, 2013 7:09:48 AM JST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=KEYNECTIS ROOT CA,OU=ROOT,O=KEYNECTIS,C=FR". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
    <Sep 11, 2013 7:09:48 AM JST> <Notice> <Security> <BEA-090898> <Ignoring the trusted CA certificate "CN=GeoTrust Primary Certification Authority - G3,OU=(c) 2008 GeoTrust Inc. - For authorized use only,O=GeoTrust Inc.,C=US". The loading of the trusted certificate list raised a certificate parsing exception PKIX: Unsupported OID in the AlgorithmIdentifier object: 1.2.840.113549.1.1.11.>
    <Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "Default[6]" is now listening on 127.0.0.1:10080 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
    <Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[6]" is now listening on 127.0.0.1:10083 for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
    <Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "Default[7]" is now listening on 0:0:0:0:0:0:0:1:10080 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
    <Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[7]" is now listening on 0:0:0:0:0:0:0:1:10083 for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
    <Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "Default[3]" is now listening on fe80:0:0:0:0:5efe:a0e:daee:10080 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
    <Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "Default[1]" is now listening on 10.14.126.11:10080 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
    <Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[5]" is now listening on fe80:0:0:0:0:5efe:a0e:224b:10083 for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
    <Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[3]" is now listening on fe80:0:0:0:0:5efe:a0e:daee:10083 for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
    <Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[1]" is now listening on 10.14.126.11:10083 for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
    <Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "Default[5]" is now listening on fe80:0:0:0:0:5efe:a0e:224b:10080 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
    <Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "Default[2]" is now listening on 10.14.34.75:10080 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
    <Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[4]" is now listening on fe80:0:0:0:0:5efe:a0e:7e0b:10083 for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
    <Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure" is now listening on 10.14.218.238:10083 for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
    <Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "Default" is now listening on 10.14.218.238:10080 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
    <Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "DefaultSecure[2]" is now listening on 10.14.34.75:10083 for protocols iiops, t3s, CLUSTER-BROADCAST-SECURE, ldaps, https.>
    <Sep 11, 2013 7:09:48 AM JST> <Notice> <Server> <BEA-002613> <Channel "Default[4]" is now listening on fe80:0:0:0:0:5efe:a0e:7e0b:10080 for protocols iiop, t3, CLUSTER-BROADCAST, ldap, snmp, http.>
    <Sep 11, 2013 7:09:48 AM JST> <Notice> <WebLogicServer> <BEA-000358> <Started WebLogic Independent Managed Server "EssbaseAdminServices0" for domain "EPMSystem" running in Production Mode>
    <Sep 11, 2013 7:09:48 AM JST> <Warning> <JMX> <BEA-149510> <Unable to establish JMX Connectivity with the Adminstration Server AdminServer at <JMXServiceURL:null>.>
    <Sep 11, 2013 7:09:48 AM JST> <Warning> <Server> <BEA-002611> <Hostname "SJ015040", maps to multiple IP addresses: 10.14.126.11, 10.14.34.75, 10.14.218.238, 0:0:0:0:0:0:0:1>
    <Sep 11, 2013 7:09:53 AM JST> <Notice> <WebLogicServer> <BEA-000365> <Server state changed to ADMIN>
    <Sep 11, 2013 7:09:53 AM JST> <Notice> <WebLogicServer> <BEA-000360> <Server started in ADMIN mode>
    HyS9eas-syserr.log is empty and I dont find anyother details from the other log files.
    Kindly help me out in solving this issue.
    Thanks in advance.
    Regards,
    Balaji P

    Hi John,
    Sorry for replying late.
    I ran the EPM diagnostic and found EAS & APS application are failed. So as you mentioned, i tried re-deployment through EPM configurator.
    But Re-configuration fails with error "An unexpected error occurred and the application will have to shut down" .
    When i looked in to the Config tool.log,I got the following messages.
    [2013-09-17T18:17:04.635+09:00] [EPMCFG] [TRACE] [EPMCFG-01001] [oracle.EPMCFG] [tid: 17] [ecid: 0000K4fDMY^0zkgpxC^AyW1IE1pJ000003,0:325] [SRC_CLASS: com.hyperion.hit.tool.deploy.utils.UIPortUtil] trace: Parsing server FinancialReporting0 on port 8200 from registry
    [2013-09-17T18:17:04.827+09:00] [EPMINS] [ERROR] [EPMINS-00001] [oracle.EPMINS] [tid: 17] [ecid: 0000K4fDMY^0zkgpxC^AyW1IE1pJ000003,0:325] [SRC_CLASS: com.hyperion.hit.wizard.Wizard] trace: Unexpected error:[[
    java.lang.NullPointerException
    at com.hyperion.hit.tool.deploy.utils.UIPortUtil.<init>(UIPortUtil.java:83)
    at com.hyperion.hit.tool.deploy.utils.UIPortUtil.getInstance(UIPortUtil.java:53)
    at com.hyperion.config.wizard.DeploymentField.getAppServerDeploymentData(DeploymentField.java:235)
    at com.hyperion.config.wizard.DeploymentField.<init>(DeploymentField.java:56)
    at com.hyperion.config.wizard.impl.DeploymentForm.<init>(DeploymentForm.java:57)
    at com.hyperion.config.wizard.impl.DeploymentState.initializeBeforeShowOnNext(DeploymentState.java:56)
    at com.hyperion.hit.wizard.Wizard$NextClass.run(Wizard.java:522)
    at java.lang.Thread.run(Thread.java:619)
    Since it is similare to the Oracle konwledge base article - (Doc ID 1570293.1), I tried adding the shared service domain to the Windows host file. But i am still recieveing the same error message as above.
    Appreciates your help.
    Thanks & Regards,
    Balaji P

  • HT4922 Downloaded 5.1.1. to my iphone. Now, Safari will not connect to my server.  Can not download web pages and many of my apps. Running very slow sluggish! Is there a fix? Sound like other users are experiencing same problems.  Anyone have a solution?

    Downloaded 5.1.1 to my iphone. Now, Safari will not connect to my server. Can not download web pages and many of my apps. Email seems to be ok. iphone running slow and sluggish.  I have read several other users have experienced the same problem. Any solutions?

    Basic troubleshooting steps oultlined in the User Guide are restart, reset, restore from backup, restore as new device.
    You need to go through all steps in succession until your problem is solved.  If going through ALL these steps fails to resolve your issue, then you'll need to bring your phone into Apple for evaluation and possible replacement.

  • Safari will not open on my iPad Air...."Safari cannot open the page because it could not connect to the server." There were recent updates on my iPad Air. How can I fix this problem?

    How can I correct the issue of Safari not connecting on my iPad Air? It was working great 2 days ago.....now on September 20 it is not working! I have an internet connection but Safari will not open. "Safari cannot open the page because it could not connect to the server."

    Hello Beckieor,
    After reviewing your post, I have located an article that can help in this situation. It contains a number of troubleshooting steps and helpful advice concerning network issues:
    iOS: Troubleshooting Wi-Fi networks and connections
    Follow these steps to troubleshoot the above issues:
    Be sure you're in range of your Wi-Fi router (access point).
    Tap Settings > Wi-Fi and turn Wi-Fi off and on. If your Wi-Fi setting is dimmed, follow these steps.
    Confirm that your Wi-Fi router and cable or DSL modem are connected to power, turned on, and connected to the Internet. If not, refer to your network administrator or Internet service provider (ISP) for assistance.
    Restart your iOS device.
    Tap Settings > Wi-Fi and locate the Wi-Fi network to which you're connected.
    Tap and Forget this Network.
    Try to connect to your desired Wi-Fi network.
    Note: You may need to enter your Wi-Fi password again if your network requires one.
    Turn your Wi-Fi router off and on2. If your ISP also provides cable or phone service, check with them before attempting this step to avoid interruption of service.
    Update your device to the latest version of software.
    Update your Wi-Fi router to the latest firmware2. For AirPort Base Stations, install updates using the AirPort Utility.
    Thank you for contributing to Apple Support Communities.
    Cheers,
    BobbyD

  • Can anyone help - my mail on my ipad will not connect to the server. My internet access is fine. How can I get my email to connect to the server?

    My ipad will not connect tot he server when trying to access my mail. This has been happening since last Sunday. Some have said it is due to the latest software update. I am able to connect to the internet.
    I am not having this issue on iPhone.
    I checked all the settings, the wireless router in my house and at work.
    I have completed a hard reset of the device.
    I had our IT guy at work look at it.
    He said to contact Apple....
    Any thoughts?
    Thanks!

    iOS: Unable to send or receive email
    http://support.apple.com/kb/TS3899
    Can’t Send Emails on iPad – Troubleshooting Steps
    http://ipadhelp.com/ipad-help/ipad-cant-send-emails-troubleshooting-steps/
    Setting up and troubleshooting Mail
    http://www.apple.com/support/ipad/assistant/mail/
    Using a POP account with multiple devices
    http://support.apple.com/kb/ht3228
    iOS: Adding an email account
    http://support.apple.com/kb/HT4810
    iOS: Setting up an Outlook.com, Hotmail, Live, or MSN email account
    http://support.apple.com/kb/ht1694
    iPhone, iPad, iPod touch: Microsoft Outlook 2003, Outlook 2007, Outlook 2010 may not display contacts and calendars after sync
    http://support.apple.com/kb/TS1944
    Server does not allow relaying email error, fix
    http://appletoolbox.com/2012/01/server-does-not-allow-relaying-email-error-fix/
    Why Does My iPad Say “Cannot Connect to Server”?
    http://www.ehow.co.uk/info_8693415_ipad-say-cannot-connect-server.html
    Gmail Account Will Not Connect to Gmail Server
    http://support.apple.com/kb/ts3058
    Error: “Server Unavailable” when accessing Yahoo on iOS devices
    https://help.yahoo.com/kb/mobile-mail/error-server-unavailable-accessing-yahoo-i os-devices-sln8834.html?impressions=true
    Unable to Delete eMail Messages
    http://support.apple.com/kb/TS2475
    How to Delete Email on the iPad
    http://ipad.about.com/od/iPad_Guide/ss/How-To-Delete-Email-On-The-Ipad.htm
    How to Mass Delete Emails from iPhone and iPad Inbox (with video)
    http://suiteminute.com/how-to-mass-delete-emails-from-iphone-and-ipad-inbox/
    How to delete ALL mail messages from iPhone/iPad in one step
    http://www.conferencesthatwork.com/index.php/technology/2014/01/how-to-delete-al l-mail-messages-from-iphoneipad-in-one-step/
    How to Attach Photos and Videos to Emails on an iPhone or  iPad
    http://www.wikihow.com/Attach-Photos-and-Videos-to-Emails-on-an-iPhone-or-iPad
    iPad Basics: Sending an Email With An Attachment
    http://ipadacademy.com/2012/03/ipad-basics-sending-an-email-with-an-attachment
    How to add, send and open iPad email attachments
    http://www.iskysoft.com/apple-ipad/ipad-email-attachments.html
    How to Send Multiple email Attachments from your iPad or iPhone
    http://ipadacademy.com/2014/03/how-to-send-multiple-email-attachments-from-your- ipad-or-iphone
    How to Sync Contacts with Your iPad Using iTunes
    http://www.dummies.com/how-to/content/how-to-sync-contacts-with-your-ipad-using- itunes.html
    Importing a Contact List CSV to the iPad
    http://techchannel.radioshack.com/importing-contact-list-csv-ipad-2235.html
    iOS: ‘Mailbox Locked’, account is in use on another device, or prompt to re-enter POP3 password
    http://support.apple.com/kb/ts2621
    iCloud: Create a group and add contacts to it
    http://support.apple.com/kb/PH2667
    eMail Groups - You can use a third party app that many users recommend.
    MailShot -  https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8
    Group Email -  https://itunes.apple.com/us/app/mailshot-pro-group-email-done/id445996226?mt=8
    Group Email! Mail Client with Attachments and Cloud Services
    https://itunes.apple.com/app/group-email!-mail-client-attachments/id380690305?mt =8
    iPad Mail
    http://www.apple.com/support/ipad/mail/
    Configuration problems with IMAP e-mail on iOS with a non-standard SSL port.
    http://colinrobbins.me/2013/02/09/configuration-problems-with-imap-e-mail-on-ios -with-a-non-standard-ssl-port/
    Try this  - Reset the iPad by holding down on the Sleep and Home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons. (This is equivalent to rebooting your computer.) No data/files will be erased. http://support.apple.com/kb/ht1430
    Or this - Delete the account in Mail and then set it up again. Settings->Mail, Contacts, Calendars -> Accounts   Tap on the Account, then on the red button that says Remove Account.
    How to delete an email account on your iPad
    http://www.shoppepro.com/support/knowledgebase/228/How-to-delete-an-email-accoun t-on-your-iPad.html
     Cheers, Tom

  • Both my iphone 4s and my ipad3 will not connect to the server when trying to access my email account. Why, and how do I fix it.

    Since 29/10/2012 my iphone 4s and more recently my ipad 3 will not connect to the server when trying to access my email account. All I get is an error message saying that 'cannot get mail, connection to the server failed' I hadnt changed any settings it just happened. I have since done a complete re-boot on the ipad but to no avail. Anybody got any suggestions?

    No. Everything was working fine and then it wasn't. I hadn't changed any settings or switched either one off. When the phone stopped working properly I ignored it because I always have my ipad with me but that just sopped working properly and now I am stuffed. I have tried most solutions suggested on here even wiping the ipad clean and re-booting. I did this exactly the same way as when I first got it but still no joy. The same with the phone.

  • Running transactional replication on SQL server 2008R2 but: "The process could not connect to subscriber 'SERVER NAME'"

    I've set up Replication (transactional replication) between two remote servers. On the one of server that I configure Distribution & publication .another server is subscription. The subscription is all set & snapshot agent is started .but the actual
    replication doesn't take place.
    When viewing the Synchronization Status of the subscription, i get an error, saying "The process could not connect to Subscriber ‘Server name'."
    Clicking on start, this is the error message I get:
    The agent could not be started.
    Additional information:
    An exception while executing a Transact-SQL statement or batch.
    SQL Server Agent Error: Request to run job Server1-EDUSRV-Pubs-Server2-14 (from User Server1\Administrator) refused because the job is already running from a request by User sa.
    Change database context to 'EDUSRV'.(Microsoft SQL Server Error:22022)
    What can i do?
    Please help me.Thanks

    The error The process could not connect to Subscriber 'Server name' indicates that the Distribution Agent process account does not have enough permissions to connect to the Subscriber.
    If this is a push subscription, verify the Distribution Agent process account is db_owner in the distribution and subscription databases, is a member of the PAL, and has read permissions on the snapshot share.
    If this is a pull subscription, verify the Distribution Agent process account is db_owner in the subscription database, is a member of the PAL, and has read permissions on the snapshot share.
    The permissions required are covered in
    Replication Agent Security Model.
    If you have anymore questions, please let me know.  I hope this helps.
    Brandon Williams (blog |
    linkedin)

  • HT201263 the itunes tales me that can not connect to update server, i tried to connect my i pad ever ting is ok to the ipad but my iphone stop working after update and i tried all solutu=ion suggested on the internet please i need help

    after i update the iphone 4s to ios 6.1.1 my i phone stop responding and a message appear tell to connect to i tune i did all the solution and put my iphone in dfu mode and nothing happen my i phone is gone no solution and a message appear tells that can not connect to update server but my ipad work at the same pc the problem in the i phone, plz some help

    Was thje TM backup 10.6 also?
    I never use TM for Backups, far better less painful backup methods, but...
    Have you looked through Pondini's extensive TM help site?
    http://Pondini.org/TM/FAQ.html
    http://pondini.org/TM/Troubleshooting.html
    Can't imagine something not being covered there.

  • Database error #2002 can not connect local mysql server to socket through '/var/run/mysqld/mysqld.sock'(2) on mac os x 10.9.2

    Dear Fellas:
    I received "database error #2002 can not connect local mysql server to socket through '/var/run/mysqld/mysqld.sock'(2)" on mac os x 10.9.2.
    mysql info:
    ps -ef | grep mysql
        0    66     1   0 11:06AM ??         0:00.04 /bin/sh /usr/local/mysql/bin/mysqld_safe --user=mysql
       74   225    66   0 11:06AM ??         0:02.50 /usr/local/mysql/bin/mysqld --basedir=/usr/local/mysql --datadir=/usr/local/mysql/data --plugin-dir=/usr/local/mysql/lib/plugin --user=mysql --log-error=/usr/local/mysql/data/Chuans-MacBook-Pro-2.local.err --pid-file=/usr/local/mysql/data/Chuans-MacBook-Pro-2.local.pid --socket=/var/run/mysqld/mysqld.sock
      501   952   947   0  3:52PM ttys000    0:00.00 grep mysql
    Please help!!

    Fascinated and guessing:
    Something related to sock(2) because that's not part of your copied info. I'm thinking you've doubled up on sockets and the second socket doesn't exist, meaning you should be connecting to the first socket "mysqld.sock" whether automatic or not.
    I've only used GUI tools on purpose, so does this mean you've already got MySQL running and you tried to launch it again manually? Perhaps you already have one instance of a db and you're trying to launch a second instance, and the two can't coexist with a single user local db?
    Assuming this is all local, I'd shut down the db service and restart it, out of hand. I've seen similar messages when I set the db to start up on boot, and it didn't finish shutting down when I tried to restart it manually. Usually the GUI won't let me turn it on because it reports it's already running, but in that case it hadn't finished performing what the GUI was reporting.
    Just speculating.

  • How to fix ipad error -1004 "could not connect to the server"

    I am trying to access the tablet edition of Vanity Fair. I already have a subscription and when I click on the "Tap here for acces to the tablet edition" it takes me to a screen & this error message pops up:
    Cannot Open Page
    This page cannot be opended because of an error
    This error is "Could not connect to the server."(-1004).
    I have deleted, reinstalled via itunes on my mac, done a hard restart and nothing seems to be working. I can browse the web using safari and am connected to the internet via wifi.
    Any suggestions?

    I have the same issue, too. My New Yorker subscription is fine, always has been. But my Conde Nast Traveler subscription won't work. I can get to the screen where you enter your information (either with name and address or subscription number and zip code), but once I press Continue I get the error.
    I emailed Conde Nast's customer service, and this is what they said:
    Dear Subscriber:
    Please accept our sincere apologies for the inconvenience you have
    experienced.
    We have applied a fix to the app for the server error and you will need
    to close and re-open your app. To do so, please double click the "home"
    button to close the running app and then re-open your app.
    Please let us know if you still experience any problems.
    If you should need further assistance, please be sure to include all
    previous e-mail correspondence.
    Thank you for your interest in Conde Nast Traveler.
    Sincerely,
    Shar
    That didn't work. I tried the restarting the iPad, as someone here suggested, but that didn't work, either. Interesting that this seems to be a Conde Nast issue - my NY Times and National Geographic subscriptions are just fine, too.
    I'm afraid I'm not sure what the guidance in this knowledge base article means: "Check security software. Ensure that communication to gs.apple.com is allowed. Follow this article for assistance with security software." How does one do that on one's iPad?
    I actually wonder if it's a firewall issue. Are any of you attempting to enter this information at work, for example? I am, and my company has a firewall/proxy that gives me issues sometimes. I'm going to try to find a wifi hotspot at lunch to see if it'll work there.

  • Could not connect to SQL Server 2012 Remotely

    Hello, 
    I have a situation as follows:
    The Server
    SQL Server 2012 Standard Edition installed on Windows Server 2012 Standard Edition
    Active Directory is installed on the same server as well
    Remote Access Role added and configured to connect VPN 
    DNS Role added
    Windows Firewall is disabled
    The Server is connected to the internet 
    SQL Server Service & SQL Browser both are running under domain accounts
    SQL Server allows remote connections
    The Router
    The router that connects the server to the Internet is configured to:
    Enable VPN Tunnels Protocols (PPTP, L2TP and IPSec)
    Forwarding > Virtual Servers (all requests on TCP and UDP on all ports to the server local IP)
    The Client
    PC running Windows 7 SP1 with SQL Server 2012 Express 
    Joined AD on the server
    Connected to the internet
    VPN Connected to the Server
    Can Remote Desktop the Server
    Can ping the server host name
    Can nslookup the server host name
    The Problem
    If Both the Server and the Client are connected in the same Local Area Network, Client can connect to the SQL Serve
    Once the Client is placed in different location connected to the Interent, VPN connected as described above, I could not connect to the Server using:
    Windows Authentication Domain Users or
    SQL Server users
    and the error message is:
    Cannot connect to SERVER\SQLINSTANCE.
    ADDITIONAL INFORMATION:
    A network-related or instance-specific error occurred while establishing a connection to SQL Server. The server was not found or was not accessible. Verify that the instance name is correct and that SQL Server is configured to allow remote connections. (provider:
    SQL Network Interfaces, error: 26 - Error Locating Server/Instance Specified) (Microsoft SQL Server, Error: -1)
    For help, click: http://go.microsoft.com/fwlink?ProdName=Microsoft%20SQL%20Server&EvtSrc=MSSQLServer&EvtID=-1&LinkId=20476
    Any thoughts
    Thanks in advance
     

    Hello Hilary,
    I have been working on a small replication test.
    On the Publisher, things went smooth and the Snapshot Agent was able to work and produce a snapshot written in a shared folder located on the Publisher
    On the Subscriber, as I am testing from SQL Server Express, I had run the following command:
    replmerg.exe -Publisher [SERVER\SQLInstance] -PublisherDB [dbRepl] -PublisherSecurityMode 0 -PublisherLogin rplMergeAgent -PublisherPassword p@ssw0rd -Publication [TEST Publication] -Distributor [SERVER\SQLInstance] -DistributorSecurityMode 0 -DistributorLogin
    rplMergeAgent -DistributorPassword p@ssw0rd -Subscriber [SUBSCRIBER\SQLInstance] -SubscriberSecurityMode 0 -SubscriberLogin rplMergeAgent -SubscriberPassword p@ssw0rd -SubscriberDB [dbRepl] -SubscriptionType 1 -OutputVerboseLevel 2 -Output C:\TEMP\mergeagent.log 
    Where 
    SERVER
    Publisher and Distributor
    dbRepl
    Database to replicate
    Merge Agent
    rplMergeAgent
    Subscriber
    SUBSCRIBER
    dbRepl
    Subscriber Database
    Merge Agent
    rplMergeAgent
    Password
    p@ssw0rd
    rplMergeAgent
    SQL Login defined in both Publisher and Subscriber with same password
    Granted the following at Publisher:
    Login to Publication Database (dbRepl)
    Login to Distribution Database (distribution)
    Member of PAL
    Granted the following at Subscriber:
    db_owner fixed database role in Subscription database (dbRepl)
    I couldn't grant rplMergeAgent Read Permission on SnapshotFolder as it is only a SQL Login.
    When I ran the above command line, I received the following error:
    Message: The schema script 'Person_2.sch' could not be propagated to the subscriber.
    I am pasting below the whole log file written by the above command:
    2014-04-11 15:38:07.205 Microsoft SQL Server Merge Agent 11.0.2218.0
    2014-04-11 15:38:07.342 Copyright (c) 2008 Microsoft Corporation
    2014-04-11 15:38:07.389 
    2014-04-11 15:38:07.406 The timestamps prepended to the output lines are expressed in terms of UTC time.
    2014-04-11 15:38:07.433 User-specified agent parameter values:
    -Publisher SERVER\SQLInstance
    -PublisherDB dbRepl
    -PublisherSecurityMode 0
    -PublisherLogin rplMergeAgent
    -PublisherPassword **********
    -Publication TEST Publication
    -Distributor SERVER\SQLInstance
    -DistributorSecurityMode 0
    -DistributorLogin rplMergeAgent
    -DistributorPassword **********
    -Subscriber SUBSCRIBER\SQLInstance
    -SubscriberSecurityMode 0
    -SubscriberLogin rplMergeAgent
    -SubscriberPassword **********
    -SubscriberDB dbRepl
    -SubscriptionType 1
    -OutputVerboseLevel 2
    -Output C:\TEMP\mergeagent.log
    2014-04-11 15:38:07.497 Percent Complete: 0
    2014-04-11 15:38:07.517 Connecting to Subscriber 'SUBSCRIBER\SQLInstance'
    2014-04-11 15:38:07.518 Connecting to OLE DB Subscriber at datasource: 'SUBSCRIBER\SQLInstance', location: '', catalog: 'dbRepl', providerstring: '' using provider 'SQLNCLI11'
    2014-04-11 15:38:07.608 OLE DB Subscriber: SUBSCRIBER\SQLInstance
    DBMS: Microsoft SQL Server
    Version: 10.50.4000
    catalog name: dbRepl
    user name: rplMergeAgent
    API conformance: 0
    SQL conformance: 0
    transaction capable: 1
    read only: F
    identifier quote char: "
    non_nullable_columns: 0
    owner usage: 15
    max table name len: 128
    max column name len: 128
    need long data len: 
    max columns in table: 1000
    max columns in index: 16
    max char literal len: 131072
    max statement len: 131072
    max row size: 131072
    2014-04-11 15:38:07.613 OLE DB Subscriber 'SUBSCRIBER\SQLInstance': select SERVERPROPERTY ('ProductVersion') 
    2014-04-11 15:38:07.617 OLE DB Subscriber 'SUBSCRIBER\SQLInstance': set nocount on declare @dbname sysname select @dbname = db_name() declare @collation nvarchar(255) select @collation = convert(nvarchar(255), databasepropertyex(@dbname, N'COLLATION')) select
    collationproperty(@collation, N'CODEPAGE') as 'CodePage', collationproperty(@collation, N'LCID') as 'LCID', collationproperty(@collation, N'COMPARISONSTYLE') as 'ComparisonStyle',cast(case when convert (int,databasepropertyex (@dbname,'comparisonstyle')) &
    0x1 = 0x1 then 0 else 1 end as bit) as DB_CaseSensitive,cast(case when convert (int,serverproperty ('comparisonstyle')) & 0x1 = 0x1 then 0 else 1 end as bit) as Server_CaseSensitive set nocount off
    2014-04-11 15:38:07.637 OLE DB Subscriber 'SUBSCRIBER\SQLInstance': {?=call sp_helpsubscription_properties (N'SERVER\SQLInstance', N'dbRepl', N'TEST Publication')}
    2014-04-11 15:38:07.681 Distributor security mode: 0, login name: rplMergeAgent, password: ********.
    2014-04-11 15:38:07.682 Percent Complete: 0
    2014-04-11 15:38:07.683 Connecting to Distributor 'SERVER\SQLInstance'
    2014-04-11 15:38:07.684 Connecting to OLE DB Distributor at datasource: 'SERVER\SQLInstance', location: '', catalog: '', providerstring: '' using provider 'SQLNCLI11'
    2014-04-11 15:38:25.062 OLE DB Distributor: SERVER\SQLInstance
    DBMS: Microsoft SQL Server
    Version: 11.00.2100
    catalog name: 
    user name: guest
    API conformance: 0
    SQL conformance: 0
    transaction capable: 1
    read only: F
    identifier quote char: "
    non_nullable_columns: 0
    owner usage: 15
    max table name len: 128
    max column name len: 128
    need long data len: 
    max columns in table: 1000
    max columns in index: 16
    max char literal len: 131072
    max statement len: 131072
    max row size: 131072
    2014-04-11 15:38:28.887 OLE DB Distributor 'SERVER\SQLInstance': select SERVERPROPERTY ('ProductVersion') 
    2014-04-11 15:38:29.842 OLE DB Distributor 'SERVER\SQLInstance': {call sp_helpdistpublisher (N'SERVER\SQLInstance') }
    2014-04-11 15:38:32.198 OLE DB Distributor 'SERVER\SQLInstance': select datasource, srvid from master..sysservers where upper(srvname) = upper(N'SERVER\SQLInstance')
    2014-04-11 15:38:33.199 OLE DB Distributor 'SERVER\SQLInstance': {call sp_MShelp_merge_agentid (0,N'dbRepl',N'TEST Publication',null,N'dbRepl',100,N'SUBSCRIBER\SQLInstance')}
    2014-04-11 15:38:34.451 OLE DB Subscriber 'SUBSCRIBER\SQLInstance': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
    2014-04-11 15:38:34.560 OLE DB Distributor 'SERVER\SQLInstance': {call sp_MShelp_profile (23, 4, N'')}
    2014-04-11 15:38:36.189 OLE DB Subscriber 'SUBSCRIBER\SQLInstance': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
    2014-04-11 15:38:36.499 OLE DB Distributor 'SERVER\SQLInstance': {call sys.sp_get_redirected_publisher(N'SERVER\SQLInstance',N'dbRepl',0)}
    2014-04-11 15:38:37.396 Percent Complete: 0
    2014-04-11 15:38:37.396 OLE DB Subscriber 'SUBSCRIBER\SQLInstance': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
    2014-04-11 15:38:37.399 Initializing
    2014-04-11 15:38:37.401 OLE DB Distributor 'SERVER\SQLInstance': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
    2014-04-11 15:38:37.403 Connecting to OLE DB Publisher at datasource: 'SERVER\SQLInstance', location: '', catalog: 'dbRepl', providerstring: '' using provider 'SQLNCLI11'
    2014-04-11 15:38:38.427 Percent Complete: 0
    2014-04-11 15:38:38.428 Validating publisher
    2014-04-11 15:38:38.429 OLE DB Distributor 'SERVER\SQLInstance': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
    2014-04-11 15:38:39.455 Percent Complete: 0
    2014-04-11 15:38:39.456 Connecting to Publisher 'SERVER\SQLInstance'
    2014-04-11 15:38:39.457 OLE DB Distributor 'SERVER\SQLInstance': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
    2014-04-11 15:38:46.548 OLE DB Publisher: SERVER\SQLInstance
    DBMS: Microsoft SQL Server
    Version: 11.00.2100
    catalog name: dbRepl
    user name: rplMergeAgent
    API conformance: 0
    SQL conformance: 0
    transaction capable: 1
    read only: F
    identifier quote char: "
    non_nullable_columns: 0
    owner usage: 15
    max table name len: 128
    max column name len: 128
    need long data len: 
    max columns in table: 1000
    max columns in index: 16
    max char literal len: 131072
    max statement len: 131072
    max row size: 131072
    2014-04-11 15:38:50.282 OLE DB Publisher 'SERVER\SQLInstance': set nocount on declare @dbname sysname select @dbname = db_name() declare @collation nvarchar(255) select @collation = convert(nvarchar(255), databasepropertyex(@dbname, N'COLLATION')) select collationproperty(@collation,
    N'CODEPAGE') as 'CodePage', collationproperty(@collation, N'LCID') as 'LCID', collationproperty(@collation, N'COMPARISONSTYLE') as 'ComparisonStyle',cast(case when convert (int,databasepropertyex (@dbname,'comparisonstyle')) & 0x1 = 0x1 then 0 else 1 end
    as bit) as DB_CaseSensitive,cast(case when convert (int,serverproperty ('comparisonstyle')) & 0x1 = 0x1 then 0 else 1 end as bit) as Server_CaseSensitive set nocount off
    2014-04-11 15:38:57.393 OLE DB Publisher 'SERVER\SQLInstance': select SERVERPROPERTY ('ProductVersion') 
    2014-04-11 15:38:59.236 Connecting to OLE DB Publisher at datasource: 'SERVER\SQLInstance', location: '', catalog: 'dbRepl', providerstring: '' using provider 'SQLNCLI11'
    2014-04-11 15:39:07.271 OLE DB Publisher: SERVER\SQLInstance
    DBMS: Microsoft SQL Server
    Version: 11.00.2100
    catalog name: dbRepl
    user name: rplMergeAgent
    API conformance: 0
    SQL conformance: 0
    transaction capable: 1
    read only: F
    identifier quote char: "
    non_nullable_columns: 0
    owner usage: 15
    max table name len: 128
    max column name len: 128
    need long data len: 
    max columns in table: 1000
    max columns in index: 16
    max char literal len: 131072
    max statement len: 131072
    max row size: 131072
    2014-04-11 15:39:45.229 OLE DB Subscriber 'SUBSCRIBER\SQLInstance': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
    2014-04-11 15:39:45.234 Percent Complete: 0
    2014-04-11 15:39:45.235 OLE DB Subscriber 'SUBSCRIBER\SQLInstance': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
    2014-04-11 15:39:45.236 Retrieving publication information
    2014-04-11 15:39:45.238 OLE DB Distributor 'SERVER\SQLInstance': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
    2014-04-11 15:39:46.287 Percent Complete: 0
    2014-04-11 15:39:46.288 Retrieving subscription information.
    2014-04-11 15:39:46.290 OLE DB Distributor 'SERVER\SQLInstance': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
    2014-04-11 15:40:00.472 OLE DB Subscriber 'SUBSCRIBER\SQLInstance': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
    2014-04-11 15:40:00.478 Percent Complete: 0
    2014-04-11 15:40:00.479 Applying the snapshot to the Subscriber
    2014-04-11 15:40:00.480 OLE DB Distributor 'SERVER\SQLInstance': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
    2014-04-11 15:40:02.535 OLE DB Distributor 'SERVER\SQLInstance': select datasource, srvid from master..sysservers where upper(srvname) = upper(N'SERVER\SQLInstance')
    2014-04-11 15:40:03.559 OLE DB Distributor 'SERVER\SQLInstance': {call sys.sp_MSadd_mergesubentry_indistdb (0,N'SERVER\SQLInstance',N'dbRepl',N'TEST Publication',N'SUBSCRIBER\SQLInstance',N'dbRepl',1,1,0,N'',?,90)}
    2014-04-11 15:40:04.600 Connecting to OLE DB Subscriber at datasource: 'SUBSCRIBER\SQLInstance', location: '', catalog: 'dbRepl', providerstring: '' using provider 'SQLNCLI11'
    2014-04-11 15:40:04.609 OLE DB Subscriber: SUBSCRIBER\SQLInstance
    DBMS: Microsoft SQL Server
    Version: 10.50.4000
    catalog name: dbRepl
    user name: rplMergeAgent
    API conformance: 0
    SQL conformance: 0
    transaction capable: 1
    read only: F
    identifier quote char: "
    non_nullable_columns: 0
    owner usage: 15
    max table name len: 128
    max column name len: 128
    need long data len: 
    max columns in table: 1000
    max columns in index: 16
    max char literal len: 131072
    max statement len: 131072
    max row size: 131072
    2014-04-11 15:40:04.611 OLE DB Subscriber: SUBSCRIBER\SQLInstance
    DBMS: Microsoft SQL Server
    Version: 10.50.4000
    catalog name: dbRepl
    user name: rplMergeAgent
    API conformance: 0
    SQL conformance: 0
    transaction capable: 1
    read only: F
    identifier quote char: "
    non_nullable_columns: 0
    owner usage: 15
    max table name len: 128
    max column name len: 128
    need long data len: 
    max columns in table: 1000
    max columns in index: 16
    max char literal len: 131072
    max statement len: 131072
    max row size: 131072
    2014-04-11 15:40:07.454 OLE DB Subscriber 'SUBSCRIBER\SQLInstance': sp_MSacquiresnapshotdeliverysessionlock
    2014-04-11 15:40:07.526 OLE DB Subscriber 'SUBSCRIBER\SQLInstance': sp_MStrypurgingoldsnapshotdeliveryprogress
    2014-04-11 15:40:07.530 OLE DB Subscriber 'SUBSCRIBER\SQLInstance': sp_MSissnapshotitemapplied @snapshot_session_token = N'\\SERVER\Snapshot\unc\SERVER$SQLInstance_DBREPL_TEST PUBLICATION\20140411082109\', @snapshot_progress_token = N'\\SERVER\Snapshot\unc\SERVER$SQLInstance_DBREPL_TEST
    PUBLICATION\20140411082109\Person_2.sch'
    2014-04-11 15:40:24.659 OLE DB Subscriber 'SUBSCRIBER\SQLInstance': sp_MSreleasesnapshotdeliverysessionlock
    2014-04-11 15:40:24.663 The schema script 'Person_2.sch' could not be propagated to the subscriber.
    2014-04-11 15:40:24.665 OLE DB Subscriber 'SUBSCRIBER\SQLInstance': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
    2014-04-11 15:40:24.690 Percent Complete: 18
    2014-04-11 15:40:24.692 The schema script 'Person_2.sch' could not be propagated to the subscriber.
    2014-04-11 15:40:24.693 OLE DB Distributor 'SERVER\SQLInstance': {call sys.sp_MSadd_merge_history90 (?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?,?)}
    2014-04-11 15:40:27.541 Percent Complete: 0
    2014-04-11 15:40:27.542 Category:NULL
    Source:  Merge Replication Provider
    Number:  -2147201001
    Message: The schema script 'Person_2.sch' could not be propagated to the subscriber.
    2014-04-11 15:40:28.563 Percent Complete: 0
    2014-04-11 15:40:28.565 Category:AGENT
    Source:  SUBSCRIBER\SQLInstance
    Number:  0
    Message: The process could not read file '\\SERVER\Snapshot\unc\SERVER$SQLInstance_DBREPL_TEST PUBLICATION\20140411082109\Person_2.sch' due to OS error 1326.
    2014-04-11 15:40:28.566 Disconnecting from OLE DB Subscriber 'SUBSCRIBER\SQLInstance'
    2014-04-11 15:40:28.568 Disconnecting from OLE DB Subscriber 'SUBSCRIBER\SQLInstance'
    2014-04-11 15:40:28.569 Disconnecting from OLE DB Subscriber 'SUBSCRIBER\SQLInstance'
    2014-04-11 15:40:28.570 Disconnecting from OLE DB Subscriber 'SUBSCRIBER\SQLInstance'
    2014-04-11 15:40:28.571 Disconnecting from OLE DB Publisher 'SERVER\SQLInstance'
    2014-04-11 15:40:28.573 Disconnecting from OLE DB Publisher 'SERVER\SQLInstance'
    2014-04-11 15:40:28.575 Disconnecting from OLE DB Publisher 'SERVER\SQLInstance'
    2014-04-11 15:40:28.577 Disconnecting from OLE DB Publisher 'SERVER\SQLInstance'
    2014-04-11 15:40:28.578 Disconnecting from OLE DB Distributor 'SERVER\SQLInstance'
    2014-04-11 15:40:28.579 Disconnecting from OLE DB Distributor 'SERVER\SQLInstance'
    I can say it is about how can the rplMergeAgent read the Shared folder.
    What do you think?

  • Addon in Client is not connecting to SQL Server 2005

    Hi, we have an add-on, which is working in SBO 2005 with SQL Server 2000.
    When the addon tries to connect to the same DB, restored on a SQL Server 2005, the addon is hanging up on the oCompany.Connect method. But this only happens when we try a remote connection from a SBO client.
    If we run the addon from the SBO server, where the SQL Server is running too, the addon completes the connection in the expected way.
    The SBO Client is connecting to the server, and works fine, but the addon is not connecting to the server.
    We try to connect to the server from the client, using SQL Query Analizer from SQL Server 2000, and it works fine too.
    Does anyone knows how to fix this issue?
    Thanks

    Hi Alejandro, thanks for your response.
    After installing SBO Patch 20 the add-on is now connecting fine, so I think it must be an upgrade on the new DI API. I noticed the version changes from 6.80.318 to 6.80.319
    I had checked the SQL to confirm is was allowing remote connections.
    Thank you guys.

Maybe you are looking for

  • HP Officejet Pro K8600 - Black Ink issue

    Hi everyone, I have HP Officejet Pro K8600, the printer was fine but after I printed on 4x6 HP Premium Glossy Photo Paper now when I print normal text document the Black Color is not too black it is sort of faded black (very dark grey). I chose diffe

  • Binary to hex convertor

    Hello all, I was searching on the internet an binary to hex convertor in java language, but I was found 0 results. I want to converting an binary number to hex number, but not binary or hex calculator. I need a java code for converting binary code in

  • Can an slideshow be viewed by non mac users?

    If i create a slideshow in iphoto can I send it to someone who uses a pc? If so how do i do that?

  • I'm trying to view tutorials in an mp4 format but having no luck at all. Any suggestions out there?

    I have a Wacom Bamboo Tablet and am trying to view the tutorials at http://www.penscrappers.com/learning-center/painting-in-detail/. These tutorials are in the mp4 format but won't display. Does anyone have any suggestions?? Thanks, Roberta

  • Mini Not Finding Internet!?

    For some reason my Mac Mini is not finding the internet even though the internet is working... Our internet comes into a router which splits it to mine and 2 other macs an imac through Ethernet and another mini through wireless....Both are getting th