OVM 3.1.1 Repository Being Mapped with Diffferent /dev/mapper/ address

Hello,
I'm running OVM 3.1 on a Dell T420 server with onboard storage. The RAID 5 virtual disk that was housing my repository was inadvertently deleted. I was able to recreate a new VD and the server can now see the original ocsf2 partition that the repository lived on. However, it obtained a new /dev/mapper/ address and OVM manager will not mount the repository. Is there a way to rename the /dev/mapper address to the old address that OVM manager is looking for? Thanks!

No, the ID in /dev/mapper is generated from the SCSI-83-page and that one is created on the storage and it cannot be changed. You can find some howto on the net, that deals with such an issue where, but it's not for the faint-hearted. A lot of information are in this post, which deals with howto get an existing storage repo up on a remote site, but some of the concepts also apply to your situation:
https://oraclenz.wordpress.com/2013/06/13/oracle-vm-3-1-disaster-recovery-ha/
That one helped me as well…
https://community.oracle.com/thread/3596198
Cheers,
budy

Similar Messages

Why is my email address being replaced with someone elses email address when I send it?

In my thunderbird account, we have 4 email accounts set up. There used to be fifth one that I have removed because she no longer works here. However, when I send an email through thunderbird, the recipients do not see my name or email address. It shows up as if it's coming from the woman who previously worked here. How can this happen if I have removed her email address from thunderbird?

What's the exact wording of the error message?

Using SSO and user mapping with WebDav Repository

Hi guys,
I have a WebDav Repository in portal and i configured SSO with SSO22KerbMap in IIS server. All is ok, but i have some UME users than don't have user in our Active Directory, i need use user mapping with this users. Do it's possible?
Currently i have a KMWebDav system (with same alias name that http system) and i mapped one of my UME user (with name 'umeuser' for example) with one Active Directory user (with name 'aduser' for example), if i try access to my webdav repository from KM Content with 'umeuser' i can see in SSO22KerbMap log a message like:
10:48:57 6756/4652 i OnPreprocHeaders: Determined account umeuser from cookie MYSAPSSO2
10:48:57 6756/4652 E OnPreprocHeaders: Found 0 UserPrincipalNames for ADSI Filter...
Can somebody help me?
Thanks in advanced.

Hi Guys,
Any takers?
Suggestions would be appreciated.
Cheers
Ian Henderson

Issue in Color Theme on the map with ADF geographic components

I am facing an issue in bringing up a map using color theme .I can able to bring up a map with color themes using geographic components feature in ADF.
The problem here is 'Edit Color Map Theme' dialog which lists Map Theme in five categories like continents,counties,countries,states_abbrev,states_names.
we had implemented map using Color Theme based on the states_abbrev and found it was working properly.
But after some days we found that the settings we made to work for the map no longer works and resulted in no color theme on the map being displayed on the page.
It was found that the states_names works properly instead of states_abbrev by that time.
But again after some days it didnt work with state_names and we revert back our code to follow state_abbrev so as to get the desired result.
Does somebody know where is the problem and how to approach this issue?

Quick Install is gone.
Database repair doesn't work.
Color coded categories is gone, and as you've discovered Theme colors are gone.
Print to Excel is gone.
Many desktop clients that worked with 4.2 do not work.
It won't work with legacy devces.
and others.... There are lots of complaints about 6.2 scattered around the forums. Personally, the HotSync manager keeps forgetting the connections I've set, and goes to default views.
You aren't missing much of anything, IMHO.
WyreNut
Post relates to: Centro (AT&T)
Message Edited by WyreNut on 02-20-2009 12:18 PM
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Mapping with Scd operator set to type 2 reading source records two times

Mapping with Scd operator set to type 2 reading source records two times.Records selected count being displayed at the end of execution is double the source record count.This possibly is affecting the performance of the mapping.
Is this a bug in scd type 2 operagtor in OWB 11gR2.How to rectify this umwamted double loop through the source data selectiom?

Hi Roelant,
I think it is important to be aware that although Paris - 10gR2 - is not actually buggy (in this respect!), it is really quite idiosyncratic in exactly how it processes SCDs.
I followed up on your and Mark's comments, and did an in depth analysis of this topic. It is at http://www.donnapkelly.pwp.blueyonder.co.uk/documents/OWB_10gR2_SCD.pdf
My conclusions are perhaps of interest to anyone considering doing SCD processing with Paris.
I'll be doing a follow-up this weekend, and publishing a sort of 'how-to-do-it' guide.
Cheers,
Donna
Message was edited to add the words: "in this respect"

Repository Creation fails with Time Out Error

Hi
I am trying a test setup of OVM3.1.1-305. I am using OpenFiler for iSCSI disks and have created 20GB iSCSI disk for Pool FileSystem and another 260GB iSCSI disk for Data Repository. The server pool gets created fine with the Pool FS and HA and Cluster options enabled. But while exposing the iSCSI disk for data store the job times out. Details of the error message is as below, please help!
The Job has timed out while executing, and will be aborted.
Job Construction Phase
begin()
Appended operation 'File System Construct' to object '0004fb000009000001b30fa7bc24bef1 (Local FS ibcovs1)'.
Appended operation 'Cluster File System Present' to object 'fb5840a9a3a78f51'.
Appended operation 'Repository Construct' to object '0004fb00000300009bfb51738df3f282 (OPNFILER (2))'.
commit()
Completed Step: COMMIT
Objects and Operations
Object (IN_USE): [LocalFileServer] 0004fb000009000001b30fa7bc24bef1 (Local FS ibcovs1)
Operation: File System Construct
Object (CREATED): [Repository] 0004fb00000300009bfb51738df3f282 (OVSRepos)
Operation: Repository Construct
Object (IN_USE): [LocalFileServer] 0004fb0000090000a8d525219658c28a (Local FS ibcovs2)
Object (IN_USE): [Cluster] fb5840a9a3a78f51
Operation: Cluster File System Present
Object (CREATED): [LocalFileSystem] 0004fb00000500000cd1d94d87e829e8 (fs_OVSRepos)
Object (IN_USE): [StorageElement] 0004fb0000180000bf6e8d3ff957b21b (OPNFILER (2))
Job Running Phase at 04:01 on Mon, Dec 3, 2012
Job Participants: [44:45:4c:4c:48:00:10:44:80:52:b4:c0:4f:33:42:53 (ibcovs1), 44:45:4c:4c:48:00:10:46:80:32:c6:c0:4f:34:42:53 (ibcovs2)]
Actioner
Starting operation 'File System Construct' on object '0004fb00000500000cd1d94d87e829e8 (fs_OVSRepos)'
Job: 1354487506506, aborted post-commit by user: admin
Write Methods Invoked
Class=InternalJobDbImpl vessel_id=2477 method=addTransactionIdentifier accessLevel=6
Class=LocalFileServerDbImpl vessel_id=788 method=createFileSystem accessLevel=6
Class=LocalFileSystemDbImpl vessel_id=2486 method=setName accessLevel=6
Class=LocalFileSystemDbImpl vessel_id=2486 method=setFoundryContext accessLevel=6
Class=LocalFileSystemDbImpl vessel_id=2486 method=onPersistableCreate accessLevel=6
Class=LocalFileSystemDbImpl vessel_id=2486 method=setLifecycleState accessLevel=6
Class=LocalFileSystemDbImpl vessel_id=2486 method=setRollbackLifecycleState accessLevel=6
Class=LocalFileSystemDbImpl vessel_id=2486 method=setRefreshed accessLevel=6
Class=LocalFileSystemDbImpl vessel_id=2486 method=setBackingDevices accessLevel=6
Class=LocalFileSystemDbImpl vessel_id=2486 method=setUuid accessLevel=6
Class=LocalFileSystemDbImpl vessel_id=2486 method=setPath accessLevel=6
Class=LocalFileSystemDbImpl vessel_id=2486 method=setSimpleName accessLevel=6
Class=LocalFileSystemDbImpl vessel_id=2486 method=addFileServer accessLevel=6
Class=LocalFileSystemDbImpl vessel_id=2486 method=setStorageDevice accessLevel=6
Class=StorageElementDbImpl vessel_id=1121 method=addLayeredFileSystem accessLevel=6
Class=LocalFileSystemDbImpl vessel_id=2486 method=setSimpleName accessLevel=6
Class=LocalFileServerDbImpl vessel_id=922 method=addFileSystem accessLevel=6
Class=LocalFileSystemDbImpl vessel_id=2486 method=addFileServer accessLevel=6
Class=ClusterDbImpl vessel_id=1340 method=addLocalFileSystem accessLevel=6
Class=LocalFileSystemDbImpl vessel_id=2486 method=setCluster accessLevel=6
Class=LocalFileSystemDbImpl vessel_id=2486 method=setAsset accessLevel=6
Class=LocalFileSystemDbImpl vessel_id=2486 method=createRepository accessLevel=6
Class=RepositoryDbImpl vessel_id=2492 method=setName accessLevel=6
Class=RepositoryDbImpl vessel_id=2492 method=setFoundryContext accessLevel=6
Class=RepositoryDbImpl vessel_id=2492 method=onPersistableCreate accessLevel=6
Class=RepositoryDbImpl vessel_id=2492 method=setLifecycleState accessLevel=6
Class=RepositoryDbImpl vessel_id=2492 method=setRollbackLifecycleState accessLevel=6
Class=RepositoryDbImpl vessel_id=2492 method=setRefreshed accessLevel=6
Class=RepositoryDbImpl vessel_id=2492 method=setDom0Uuid accessLevel=6
Class=RepositoryDbImpl vessel_id=2492 method=setSharePath accessLevel=6
Class=RepositoryDbImpl vessel_id=2492 method=setSimpleName accessLevel=6
Class=RepositoryDbImpl vessel_id=2492 method=setFileSystem accessLevel=6
Class=LocalFileSystemDbImpl vessel_id=2486 method=addRepository accessLevel=6
Class=RepositoryDbImpl vessel_id=2492 method=setManagerUuid accessLevel=6
Class=RepositoryDbImpl vessel_id=2492 method=setVersion accessLevel=6
Class=RepositoryDbImpl vessel_id=2492 method=addJobOperation accessLevel=6
Class=RepositoryDbImpl vessel_id=2492 method=setSimpleName accessLevel=6
Class=RepositoryDbImpl vessel_id=2492 method=setDescription accessLevel=6
Class=InternalJobDbImpl vessel_id=2477 method=setCompletedStep accessLevel=6
Class=InternalJobDbImpl vessel_id=2477 method=setAssociatedHandles accessLevel=6
Job Internal Error (Operation)com.oracle.ovm.mgr.api.exception.FailedOperationException: OVMAPI_B000E Storage plugin command [storage_plugin_createFileSystem] failed for storage server [0004fb000009000001b30fa7bc24bef1] failed with [com.oracle.ovm.mgr.api.exception.FailedOperationException: OVMAPI_4010E Attempt to send command: dispatch to server: ibcovs1 failed. OVMAPI_4004E Server Failed Command: dispatch https://?uname?:[email protected]:8899/api/2 storage_plugin_createFileSystem oracle.ocfs2.OCFS2.OCFS2Plugin 0004fb00000500000cd1d94d87e829e8 /dev/mapper/14f504e46494c4552637a6f5154372d7643426d2d49333763 0, Status: java.lang.InterruptedException
Mon Dec 03 04:03:48 IST 2012
Mon Dec 03 04:03:48 IST 2012] OVMAPI_4010E Attempt to send command: dispatch to server: ibcovs1 failed. OVMAPI_4004E Server Failed Command: dispatch https://?uname?:[email protected]:8899/api/2 storage_plugin_createFileSystem oracle.ocfs2.OCFS2.OCFS2Plugin 0004fb00000500000cd1d94d87e829e8 /dev/mapper/14f504e46494c4552637a6f5154372d7643426d2d49333763 0, Status: java.lang.InterruptedException
Mon Dec 03 04:03:48 IST 2012
Mon Dec 03 04:03:48 IST 2012
Mon Dec 03 04:03:48 IST 2012
at com.oracle.ovm.mgr.action.StoragePluginAction.processException(StoragePluginAction.java:1371)
at com.oracle.ovm.mgr.action.StoragePluginAction.createFileSystem(StoragePluginAction.java:894)
at com.oracle.ovm.mgr.op.physical.storage.FileSystemConstruct.createFileSystem(FileSystemConstruct.java:57)
at com.oracle.ovm.mgr.op.physical.storage.FileSystemConstruct.action(FileSystemConstruct.java:49)
at com.oracle.ovm.mgr.api.collectable.ManagedObjectDbImpl.executeCurrentJobOperationAction(ManagedObjectDbImpl.java:1009)
at com.oracle.odof.core.AbstractVessel.invokeMethod(AbstractVessel.java:330)
at com.oracle.odof.core.AbstractVessel.invokeMethod(AbstractVessel.java:290)
at com.oracle.odof.core.storage.Transaction.invokeMethod(Transaction.java:822)
at com.oracle.odof.core.Exchange.invokeMethod(Exchange.java:245)
at com.oracle.ovm.mgr.api.physical.storage.LocalFileServerProxy.executeCurrentJobOperationAction(Unknown Source)
at com.oracle.ovm.mgr.api.job.JobEngine.operationActioner(JobEngine.java:218)
at com.oracle.ovm.mgr.api.job.JobEngine.objectActioner(JobEngine.java:309)
at com.oracle.ovm.mgr.api.job.InternalJobDbImpl.objectCommitter(InternalJobDbImpl.java:1140)
at com.oracle.odof.core.AbstractVessel.invokeMethod(AbstractVessel.java:330)
at com.oracle.odof.core.AbstractVessel.invokeMethod(AbstractVessel.java:290)
at com.oracle.odof.core.BasicWork.invokeMethod(BasicWork.java:136)
at com.oracle.odof.command.InvokeMethodCommand.process(InvokeMethodCommand.java:100)
at com.oracle.odof.core.BasicWork.processCommand(BasicWork.java:81)
at com.oracle.odof.core.TransactionManager.processCommand(TransactionManager.java:773)
at com.oracle.odof.core.WorkflowManager.processCommand(WorkflowManager.java:401)
at com.oracle.odof.core.WorkflowManager.processWork(WorkflowManager.java:459)
at com.oracle.odof.io.AbstractClient.run(AbstractClient.java:42)
at java.lang.Thread.run(Thread.java:662)
Caused by: com.oracle.ovm.mgr.api.exception.FailedOperationException: OVMAPI_4010E Attempt to send command: dispatch to server: ibcovs1 failed. OVMAPI_4004E Server Failed Command: dispatch https://?uname?:[email protected]:8899/api/2 storage_plugin_createFileSystem oracle.ocfs2.OCFS2.OCFS2Plugin 0004fb00000500000cd1d94d87e829e8 /dev/mapper/14f504e46494c4552637a6f5154372d7643426d2d49333763 0, Status: java.lang.InterruptedException
Mon Dec 03 04:03:48 IST 2012
Mon Dec 03 04:03:48 IST 2012
at com.oracle.ovm.mgr.action.ActionEngine.sendCommandToServer(ActionEngine.java:507)
at com.oracle.ovm.mgr.action.ActionEngine.sendDispatchedServerCommand(ActionEngine.java:444)
at com.oracle.ovm.mgr.action.ActionEngine.sendServerCommand(ActionEngine.java:378)
at com.oracle.ovm.mgr.action.StoragePluginAction.createFileSystem(StoragePluginAction.java:890)
... 27 more
Caused by: com.oracle.ovm.mgr.api.exception.IllegalOperationException: OVMAPI_4004E Server Failed Command: dispatch https://?uname?:[email protected]:8899/api/2 storage_plugin_createFileSystem oracle.ocfs2.OCFS2.OCFS2Plugin 0004fb00000500000cd1d94d87e829e8 /dev/mapper/14f504e46494c4552637a6f5154372d7643426d2d49333763 0, Status: java.lang.InterruptedException
Mon Dec 03 04:03:48 IST 2012
at com.oracle.ovm.mgr.action.ActionEngine.sendAction(ActionEngine.java:798)
at com.oracle.ovm.mgr.action.ActionEngine.sendCommandToServer(ActionEngine.java:503)
... 30 more
FailedOperationCleanup
Starting failed operation 'File System Construct' cleanup on object 'fs_OVSRepos'
Complete rollback operation 'File System Construct' completed with direction=fs_OVSRepos
Rollbacker
Executing rollback operation 'File System Construct' on object '0004fb00000500000cd1d94d87e829e8 (fs_OVSRepos)'
Complete rollback operation 'File System Construct' completed with direction=DONE
Objects To Be Rolled Back
Object (IN_USE): [LocalFileServer] 0004fb000009000001b30fa7bc24bef1 (Local FS ibcovs1)
Object (CREATED): [Repository] 0004fb00000300009bfb51738df3f282 (OVSRepos)
Object (IN_USE): [LocalFileServer] 0004fb0000090000a8d525219658c28a (Local FS ibcovs2)
Object (IN_USE): [Cluster] fb5840a9a3a78f51
Object (CREATED): [LocalFileSystem] 0004fb00000500000cd1d94d87e829e8 (fs_OVSRepos)
Object (IN_USE): [StorageElement] 0004fb0000180000bf6e8d3ff957b21b (OPNFILER (2))
Thanks & Regards

check your messages log and etc on the VM server. The job log doesn't go into enough detail to tell what's causing the issue. It did fail cleanup. Meaning.... that your ocfs2 filesystem is probably orphaned. You have have to clear the iSCSI LUN before trying again.

Using iPad maps with no wifi

HI,
im going travelling soon, Im bring my iPad mini retina wifi and I was wondering if I would still be able to use maps with no wifi Connection. I understand that it won't be able to pin point my location but will it still be able to load up maps so that I can manually use it like you would with a paper map.
thanks
matt

Without an internet connection a wifi-only iPad only be able to locate you nor load the Maps app - only cellular iPads have a built-in GPS chip, wifi-only iPads rely on getting their location from the router that they are connected to being in Apple's database.
There are some external GPS units that appear to work with an iPad.
There are also maps apps where the maps are stored within the app, and which therefore don't require an internet connection to download them

Re: Drive Mapping with GPO from Server 2008 R2 to Windows 7 Pro

Justin,
I didn't think of that. They are all OEM at the minute.
However, I've been testing the mappings using an RDS server with their credentials. There's nothing on that platform that would be causing a drive letter conflict.
Still at the drawing board I'm afraid.

Good morning Spice-heads,I've got an issue with GPO and drive mappings. They're set in the standard way, new GPO linked in the root of our domain - through User Configuration, Preferences, Windows Settings, Drive Maps.They're all set as below;
They have also been set with Item Level Targeting with security groups and set to run in users context.The issue I'm having is that some users are logging in, the policy is running without issue and all is fine. Other user are logging in and only receiving the home drive and a business wide share drive that is targeted to \Domain Users.I've looked at gpresult, there is nothing in there that I can see that would explain why the drives are not being mapped - help?!Thanks,Tonka
This topic first appeared in the Spiceworks Community

Wrong 5.1 speaker mapping with X-fi on Win7 x64

/Wrong 5. speaker mapping with X-fi on Win7 x64?Hi,
I got the X-fi Platinum connected to my Onkyo SR605 receiver. Digital (spdif) connection works fine, but the analogue 5. setup not.
When I test the speakers in the Console, I only get sound from the front speakers (LF, C, RF), and no sound from the 2 back speakers (LR, RR). (I got no sub connected).
However, when I select 7. speaker setup instead of 5. in the console, the left and right side speakers which are added give sound when click the icon for testing. Now this sound comes from the back speakers (LR, RR)!
I want this sound coming from the rear speakers with the 5. setup selected, and not with 7..
It looks like somehow the software is outputting the wrong channels...
All cables are connected the right way, and I don't want to change the speaker connections on my receiver (which supports 7.). That would mess up the spdif DTS bitstream out, which is working fine. The problem is in the x-fi configuration.
Is it somehow possible to "re-map" the speakers in the software, so that I can just setup the x-fi as 5. WITH sound from my rear speakers?
I got the latest Creative drivers installed, on a Windows 7 x64 system.

When setting up the speakers in Media Center, here's all it asks, step by step:
Select number of speakers (radio button choice of 2 speakers, 5. speakers [which I have selected], and 7. speakers)
Hit next
What type of cable connects PC to speakers/receiver? Single mini-plug [analog](which is what I have selected, since I'm connected through a green, black, and orange miniplug [6 channel direct]), dual RCA [analog], single RCA [digital], Toslink [digital], or Built-in [laptop]
Hit next
Audio test. It plays 6 tones, they're supposed to hop from speaker to speaker and finally to subwoofer. Only the front center, front left, and rear right play any kind of sound during the Media Center Audio Test. Front Right and Rear Left get nothing at all.
Ok, I tried messing with other settings. I noticed in the THX setup console, I have it plugged in exactly as illustrated (orange plug in port closest to AD_LINK, black in the middle, green on the end), and had it plugged in the same way on my Z-5500 receiver (color coded). I unplugged every speaker except the Center speaker, and I clicked the center speaker in the illustration, and didn't get a sound. When I clicked Front left, the Front Left voice came out of the center speaker, being the only speaker that's plugged in.
What do I have to do to make it designate the correct speakers to the correct locatons?
Is there some kind of codec I'm supposed to be using in order for 5. to work correctly? Because at the moment I only have the center speaker plugged in to the subwoofer's center speaker connector, and the orange minijack from the orange receiver port to the correct port on the X-Fi as illustrated in the THX Setup Console, and it's only playing Front Left's sound. Is there a codec I'm supposed to be using, and if so, where do I get it'sMessage Edited by Guanthwei on 0-29-2006 02:3 PM

DS 6: SSL certificate mapping with subject/issuer containing (")

Hello,
I got my personal test certificate from Verisgin, with an issuer: CN=VeriSign Class 1 Individual Subscriber CA - G2, OU=Persona Not Validated, OU=Terms of use at https://www.verisign.com/rpa (c)05, OU=VeriSign Trust Network, O="VeriSign, Inc.", C=US
The subject of the certificate ends with: ...OU=Digital ID Class 1 - Netscape, OU=Persona Not Validated, OU="www.verisign.com/repository/RPA Incorp. by Ref.,LIAB.LTD(c)98", OU=VeriSign Trust Network, O="VeriSign, Inc."
My certmap.conf looks like:
certmap VeriSign [issuerDN]
VeriSign:FilterComps cn
VeriSign:verifycert on
VeriSign:CmapLdapAttr certSubjectDN
The question is what's the valid form of these strings containing (") in certmap.conf ([issuerDN]) to match the issuer and in certSubjectDN attribute - assuming it follows DirectoryString syntax. Note that they surround strings containing comma (,).
I see in logs:
conn=1 op=-1 msgId=-1 - SSL 128-bit RC4; client *OU=Digital ID Class 1 - Netscape,OU=Persona Not Validated,OU=\22www.verisign.com/repository/RPA Incorp. by Ref.,LIAB.LTD(c)98\22,OU=VeriSign Trust Network,O=\22VeriSign, Inc.\22; issuer CN=VeriSign Class 1 Individual Subscriber CA - G2,OU=Persona Not Validated,OU=Terms of use at https://www.verisign.com/rpa (c)05,OU=VeriSign Trust Network,O=\22VeriSign, Inc.\22,C=US
I tested configuration against cert strings from logs, but they don't work. Strings containing (") also don't work.
Did anyone face the same issue?
Thanks for help in advance.

The DN normalized version of O="Verisign, Inc." is O=Verisign\, Inc.
You may want to try this. BUt I must admit that I've never tried to do certificate mapping with quotes.
The certificate mapping functionality hasn't changed since the Netscape DS 4 code when Sun and Netscape started to work together.
Ludovic.

Updating country and regional maps with Nokia Suit...

Hi Folks
I am an E72 owner and a frequent user of Nokia Maps. Hence I use Nokia Suite to keep the map data up to date, time to time.
I normally download all countries by right-clicking the ALL item and choosing 'download all'. I thought I could download all available maps this way. But when all downloads are finished, I still can see some regional maps are NOT downloaded as the 'download' button is available for the regions.
Initially, I thought the regional maps of a country were NOT necessary if their country map has been downloaded simply because the country map should cover its all regions (comparing the map size of a country and its regions, and the regional maps were not automatically downloaded by default)
But it seems not that ture, at least for the latest map data v0.1.29.100.
As shown in the attached screenshot, for some countries, e.g.China, France, India, Italy, Spain and USA, some regional maps were automatically downloaded though most regional maps remain undownloaded (the 'download' button is available).
Why? Only those regional maps have been updated?
Do I really need to download ALL regional maps to keep all data up to date?
FYI
Model: E72-1
Type: RM-530
Software Version: 091.004
Software Version Date: 02-Jun-2012
Custom Version: 091.004.C00.01
Nokia Maps v3.04 10wk32 b04 MW OpenGL L MN
Map version 0.1.29.100
Nokia Suite 3.7.22
Any comments please?
Regards,
bbao
bbao
* If this post helped you, please click the white Kudo star.
* If this post has solved your issue, please click Accept as Solution.
Attachments:
Scr000078.jpg ‏44 KB
Nokia_Suite.Maps_1.jpg ‏150 KB
Nokia_Suite.Maps_2.jpg ‏156 KB

bbao wrote:
Thanks so much for effort farby and scoobyman.
It is interesting that the World Maps of scoobyman's E52 does not show any regional maps of China. The regional map of Heilongjiang will not appear in scoobyman's Nokia Suite, as there is no triangle symbol before 'China' indicating no regional maps for China at all. That definitely looks like the same thing that I saw on my E72 before updating to 00.01.29.100 map data.
First, scoobyman 's post has created confusion as he has not checked the same way as OP has done. He has checked selecting Maps and Voice Guidance on Phone at the bottom and not by selecting All under Maps at the top. If you see both attachments posted by me you can see the difference how they are displayed.
bbao wrote:
Yes, farby's India map with Nokia 5800xm seems having totally different map data. e.g. India map: 532 MB vs 372 MB, and Delhi map: 51 MB vs 33.7 MB.
BTW, it notice that you both are using a new version of Nokia Suite 3.8.13 Beta. Not sure if it could make any difference.
Whether Maps version is same or different is not the point. Even if the Maps version is different in both the cases it is being displayed the SAME way as OP ..only difference being the sizes of the data files ...

Well at last loaded one map with maploader but?

Hi guys
I have just been able to install one of the maps with maploader just to see if it would work and it does running it in winXP and have no problems as i did in Windows Vista 64 Ultimate.
But the problam now is that when i have downloaded the map it says that the mem card i have is nearly full and wants to put it to the phone mem how can i get it to install the the mem card? and its a 4gig card as well.
thanks for any help guys.

ok maps r loaded but don't know where to phone mem or card mem how do i find out?
no for the other problem map loader has worked great in windowsXP thats how the maps loaded up ok but within the map loader in winXP it does not give me the Op to install the Voices at all just maps.
This below was done before being able to load maps in winXP
But if i boot up in to Vista Ultimate 64 i load up the map loader it lets me chosse to load maps or voices but then i did not install the maps or the voices.
so how can i install the voices with the map loader in winXP?
hope ya can follow what i have typed.
thanks for any help guys.
GPS works great just need voice now.

Accounts being created with administrative group rights

Hello,
The server is a Windows 2003 R2 Enterprise fully patched used for Shared Hosting purposes. It runs Hsphere control panel. I am trying to identify how the following hack is happening.
1) There are users being created with Administrative group rights.   Below is the EventViewer log for the user creation:
User Account Created:
    New Account Name:    username
    New Domain:    PCNAME
    New Account ID:    PCNAME\username
    Caller User Name:    PCNAME$
    Caller Domain:    DOMAINNAME
    Caller Logon ID:   (0x0,0x3E7)
    Privileges       -
Attributes:
    Sam Account Name:    username
    Display Name:   <value not set>
    User Principal Name:   -
    Home Directory:   <value not set>
    Home Drive:   <value not set>
    Script Path:   <value not set>
    Profile Path:   <value not set>
    User Workstations:   <value not set>
    Password Last Set:   <never>
    Account Expires:   <never>
    Primary Group ID:   513
    AllowedToDelegateTo:   -
    Old UAC Value:   0x2DAB2B0
    New UAC Value:   0x2DAB2B0
    User Account Control:   -
    User Parameters:   <value not set>
    Sid History:   -
    Logon Hours:   <value changed, but not displayed>
There exists entries as well where the primary group ID is changed to the Administrative group, but I am omitting such.
2) I tried to identify what Caller Logon ID:   (0x0,0x3E7) means. I found out from here:
http://blog.joeware.net/2013/01/14/2667/ that I can use LogonSessions.exe to identify it.
Output from LogonSessions.exe is pasted below (snippet):
[0] Logon session 00000000:000003e7:
    User name:    DOMAINNAME\PCNAME$
    Auth package: NTLM
    Logon type:   (none)
    Session:      0
    Sid:          S-1-5-18
    Logon time:   9/11/2014 12:41:53 PM
    Logon server:
    DNS Domain:
    UPN:
        4: System
      316: smss.exe
      364: csrss.exe
      392: winlogon.exe
      440: services.exe
      452: lsass.exe
      628: svchost.exe
      756: LMAgent.exe
      840: svchost.exe
     1000: spoolsv.exe
     1252: avagent.exe
     1268: camWMIAgent.exe
     1324: cissesrv.exe
     1380: cpqrcmc.exe
     1404: vcagent.exe
     1440: svchost.exe
     1480: HsQuotas.exe
     1740: inetinfo.exe
     1780: EmailAgent.exe
     1856: snmp.exe
     1884: sysdown.exe
     1920: smhstart.exe
     2192: svchost.exe
     2388: cmd.exe
     2396: hpsmhd.exe
     2444: cqmgserv.exe
     2464: cqmgstor.exe
     2484: HSphere.exe
     2596: wmiprvse.exe
     2676: cmd.exe
     2684: rotatelogs.exe
     2692: cmd.exe
     2700: rotatelogs.exe
     2732: searchindexer.exe
     2812: hpsmhd.exe
     2824: cqmghost.exe
     2852: svchost.exe
     3044: cmd.exe
     3052: rotatelogs.exe
     3080: cmd.exe
     3088: rotatelogs.exe
     5452: svchost.exe
     5596: GravitixService.exe
     7392: csrss.exe
     7232: winlogon.exe
     6888: csrss.exe
     9832: winlogon.exe
    10388: wawrapper.exe
    10352: cpqnimgt.exe
     9496: msiexec.exe
     6068: w3wp.exe
     4748: webalizer.exe
3) I also learned from http://support.microsoft.com/kb/243330/en-us that Sid:          S-1-5-18 means:
SID: S-1-5-18
Name: Local System
Description: A service account that is used by the operating system
That is all great info, but I am not sure I can put together what I have learned to attempt and get closer towards identifying how in the world users are being created and then being assigned administrative group rights.
I am a Linux person mostly, but I am comfortable following a properly explained thread regarding windows 2003 R2 Enterprise issues.
The server is fully patched and it is running Lumension security product. What's more, Norman Malware tracker, tdskiller.exe (Kaspersky) and McAfee rootkitremover.exe have been run without any apparent Malware/Virus infection
Hope someone with advanced admin skills can advise.
Thank you

Hi,
You mentioned that, “I am trying to identify how the following hack is happening”, would you please tell us that why did you think the event represent a hacking behavior?
In a Shared Server Hosting environment, the underlying hosting control panel tool (Hsphere in this case) should be creating only virtual FTP users with a specific group. So no users with Administrative group should be ever created. If this happens,
it constitutes a breach of server security=positive hacking attempt.
>how in the world users are being created and then being assigned administrative group rights.
In addition, would you please be more specific about this question? Did you find the event message on a domain joined machine?
I want to be able to understand in full how/what process is allowing users to be created with Admin rights. In other words, I want to know what IP was used to issue the command, if ASP.net was used (abused in this case), or anything else related to
it so that we can patch this particular hole.
Best Regards,
Amy

My iPhone 5 has broken and is being replaced with a new iPhone tomorrow. However, My carrier (orange) will b picking up my broken iPhone and I am unsure how to secure the content and icloud data on the broken phone. Is there a way to display the data?

My iPhone 5 has broken and is being replaced with a new iPhone tomorrow. However, My carrier (orange) will b picking up my broken iPhone and I am unsure how to secure the content and icloud data on the broken phone. Is there a way to disable the data held on it and ensure that if it is fixed, nobody can use/see my data and access my account?

Hi Gazpan,
Thanks for visiting Apple Support Communities.
I recommend using the steps in this article to back up your iPhone if possible:
iOS: Back up and restore your iOS device with iCloud or iTunes
http://support.apple.com/kb/ht1766
You may also find this advice helpful for your situation:
What to do before selling or giving away your iPhone, iPad, or iPod touch
http://support.apple.com/kb/ht5661
If you no longer have your iOS device
If you're using iCloud and Find My iPhone on the device, you can erase the device remotely and remove it from your account by signing in to icloud.com/find, selecting the device, and clicking Erase. When the device has been erased, click Remove from Account.
If you're unable to complete either of the above steps, you should change your Apple ID password. Changing your password won't remove any personal information that is cached on the device, but it will make sure that the new owner can't delete your information from iCloud.
Cheers,
Jeremy

Is there a way to stop being bombarded with IAds when playing games on the iPad? This is a very annoying new way to advertise Apps.

Is there a way to stop being bombarded with IAds when using games on my IPad? Is this a new way to advertise Apps?

If these are the free versions of the games, buy the full version and the iAds should go away. The developer can offer the app for free by selling advertising. If the developer is going to give the app away, he has to be paid for his work somehow.
There may be some paid apps that might include iAds as well. In those instances, the developer includes the ads in order to subsidize the cost of the app to the end user in order to reduce the cost of the app. You should always read the app description when you download any app to make sure that you know what you are getting into - with regard to ads and in-app purchases.
Games are the worst offenders - IMO. Many "free" games become totally useless after you reach a certain level or if you reach your limit in lives or potions or things like that. If you want to continue in the game, you than have to make in-app purchases for levels, lives, potions, beads, whatever. You can rack ip quite a bill playing those "free" games if you are not aware of what you are getting into.

OVM 3.1.1 Repository Being Mapped with Diffferent /dev/mapper/ address

Similar Messages

Maybe you are looking for