OWA - save menu disappears when switching between calendar and mail

Hi everybody! We recently migrated to from Exch 07 to 13, and there seems to be a small problem in OWA.
In OWA 2013, when users creates an invite in Calendar, and switch back to Mail, a menu appears (see below) and then disappears immediately. Instead of allowing users to choose whether to save or discard changes to their invites, it automatically discards,
and goes to Mail. It happens in both IE and Chrome, and for all users. Any ideas what's
going on? Tried all the usual - clearing cache, etc. It doesn't appear to be a problem with the client. Thanks!

Hi,
From your description, I recommend you create a new mailbox in your Exchange server 2013 and verify if this new user has the same issue. What's more, this issue doesn't appear on Outlook, you can try to recreate OWA virtual directory to check the result.
Here is an article for your reference.
Reset Client Access Virtual Directories(Note: Though it is Exchange 2010, it also applies to Exchange 2013 about this issue.)
https://technet.microsoft.com/en-us/library/ff629372(v=exchg.141).aspx
Best regards,
Amy Wang
TechNet Community Support

Similar Messages

Graphic distortion when switching between external and built-in display (rMBP)

Recently (within the past two weeks or so) I've noticed a strange issue when switching between my external display (Thunderbolt) and my built-in display on my 15" rMBP. The following issue seems to be specific to Photoshop CS6.
Typically, I'll have a PS document open on my external display and I'll wind up taking my to another location. If I close the PS document while on my built-in and then re-open it, I get all kinds of distortion and pixellation. Closing out PS and reopining, restarting, logging on/off; none of it seems to work. It seems like the issue is with the PSD itself, but it doesn't make any sense to me. Any ideas? Screenshot: http://i.imgur.com/iCipSc7.jpg

Do you have intel gpy as well as other graphic card? You may be viewing document on different gpu's. PS does not like multiple gpu's.

Do I need to reset the router when switching between Win and Mac?

I just set up my new Mac Pro with OSX 1.5.2 and Win XP using Bootcamp and it all works fine, but I have one question about connecting to the internet.
I have a Belkin pre-N wireless router. I am connected using an ethernet cable.
When I switch between OSX and Windows by restarting the computer, is it necessary to restart the router while the computer is off so that when it comes back on it can locate its proper connection?
When I was working on my old PC and my new Mac Pro, I noticed that if I just took the ethernet cable from the Mac or PC and connected it to the other machine, it couldn't find the internet unless I turned off the router, waited a moment and turned it back on again, connected to the other machine and then started the machine.
As the two OSs are now in the same machine, will this continue to happen or can I simply switch between operating systems without having to re-initialize the router and connect it before turning on the computer again?
I haven't tried it yet because I am afraid to screw things up, so I am continuing to turn off, restart the router, re-connect and turn the computer on again. That work perfectly but it is tedious.
Can anyone please advise on whether this is necessary or not?
Thanks a lot for any advice.

Luis:
You should be able to leave the router on and switch between the two OSes. Try it. Worst thing that can happen is that you would need to restart the router.
Axel F.

Synchronizing contacts between calendar and mail

All,
I'm supposed to be implementing synhronization of contacts between calendar and email - unidirectional sync. in the direction from calendar to email is acceptable. I'm starting out with a sample program that somebody made and which should be working, but I have a problem when I get to calling CSDK_SetIdentity (CSDK_CreateSession and CSDK_ConnectAsSysop works fine).
The returned status code is either CAPI_STAT_DATA_USERID_ID or CAPI_STAT_DATA_USERID_EXT_FORMAT, depending on my input. Examples of what I've been trying: "?/mail=[email protected],cn=users,dc=asker,dc=kommune,dc=no,cn=UM_SYSTEM,cn=EMailServerContainer,cn=Products,cn=OracleContext"; "[email protected]" ; "marius.heggstad" or "mheggsta"; and so on...
Question 1: Examples of correct user id. format? Note that I don't understand the format examples given in the Calendar SDK Dev. Guide (s for Surname etc.).
Question 2: If you have already developed a solution for this kind of sync. job, I'd like to get my hands on it - anything that could help me get going. I'm currently using the C language; Java would be even better.
Other details: We're on linux, running OCS 9.0.4.2 on server as well as client (SDK). I've been trying the Windows as well as the linux SDK - same result.
Thanks,
Erik Hagen

All,
Hi again - summer holidays didn't help... the problem with CSDK_SetIdentity remains the same as noted in my original posting. This time, I've also been testing on another installation. The only special config I've done is "allowsysoplogon_capi = TRUE" in unison.ini, which was necessary to be able to logon as SYSOP.
Please let me know if anyone of you actually used the SDK to connect the way I'm trying, or if you have other hints. Sample working Java code?
I'm pasting my code below for you to see exactly what I'm doing:
CAPI_SetConfigFile("capi.ini", "con.log");
stat = CSDK_CreateSession(CAPI_FLAG_NONE, &gSession);
if (stat == CAPI_STAT_OK)
stat = CSDK_ConnectAsSysop ( gSession, CAPI_FLAG_NONE, "akoraapp.asker.kommune.no","1","akora77" ) ;
else
CSDK_GetStatusString (stat, &errorName);
printf("You were unable to create session \n");
exit(1);
CSDK_GetStatusString (stat, &errorName);
/* Establish connection to calendar server */
printf(">>%s\n", errorName ? errorName : "(null)");
if (stat == CAPI_STAT_OK)
printf("\nCongratulations! You are now connected to your calendar server.\n");
else
printf("You were unable to connect to the server\n");
CSDK_DestroySession(&gSession);
exit(1);
sprintf(p_filename,"userlist.txt");
if ((fileid = fopen(p_filename,"r")) == NULL)
printf("Unable to Open userlist.txt ....");
while (fgets(p_buffer, BUFFER_SIZE, fileid))
stat = CSDK_SetIdentity(gSession,p_buffer, CAPI_FLAG_NONE);
if (stat == CAPI_STAT_OK)
printf("\nIdentified.\n");
else
printf("Unable to set Identity for %s", p_buffer);
CSDK_GetStatusString (stat, &errorName);
printf(">>%s\n", errorName ? errorName : "(null)");
continue;
Thanks, Erik

Using Windows 7 and Firefox 10.0.2, at random times all home page images "disappear" when switching between web sites. Page layout on some web sites is lost. Requires removing and downloading Firefox to restore. Any ideas?

I have recently (6 months ago) purchased and use an HP Pavilion desktop with Windows 7. At times, when especially active (several windows open) and switching between windows or using links to connect with another web page, all the images on the home home page "disappear", that is to say there is space, but no image, as if the page did not load correctly. When this happens, pages other than the home page also do not display images.
Same pages display correctly in Explorer whenever this happens.

Hi
Can you please try setting up full persmission in the security properties for everyone on the wsconfig folder C:\ColdFusion10\config\wsconfig and restart ColdFusion Server.
Swaraj

Major delay when switching between folders in Mail

More often than not when I switch between folders (inbox-to-trash or junk-to-inbox, etc) none of the messages in that folder show up and it says on top "0 messages".
Sometimes they come back after 5 or 6 seconds. Other times it takes over a minute. There usually aren't that many messages in either the folder I'm coming from or going to.
Any thoughts?

Based on the tons of new messages showed up in the Trash, I suggest the following.
Quit Mail first and using the Finder go to Home > Library > Mail.
Copy the Mail folder and place the copy on the Desktop for backup purposes.
Using the Finder, go to Home > Library > Mail > Envelope Index.
Delete the Envelope Index file and empty the Trash.
The Envelope Index file stores an index of all mailboxes and messages.
Launch Mail and you will be prompted to import mailboxes. Select OK and allow the process to complete. This isn't really importing anything but creating a new Envelope Index file within the Mail folder and re-indexing all mailboxes and messages within.
This may cause more previously deleted messages to re-appear but this should resolve the delay problem.
After confirming all mailboxes are available and there is nothing unusual, you can delete the copy of the Mail folder placed on the Desktop.

Occasional grey screen when switching between SL and Windows

Hi folks,
I set up my new Mac Mini to dual-boot with Windows XP using boot camp. Sometimes when I switch from one to the other the system hangs on a grey screen and I have to shut down using the power button. This happens both when I choose restart and hold down the options (alt) tab and when I use system preferences and choose the boot drive from the menu. This is my config:
Mac Mini 2009 with 120GB HDD and 2GB RAM, running Snow Leopard and WindowsXP, Microsoft Natural Curve Keyboard 2000 and Logitech Optical mouse (both USB),
HP 1310 AIO inkjet printer. I am networked to an HP 1320tn laserjet printer and an NAS that is formatted to FAT32. Everything works.
Additionally, I have an external drive (2.5" HDD) that connects to the back of the Mini using two USB cables for power. I'm pretty sure I have the external drive formatted to FAT32 because both operating systems can see the contents.
I am wondering if the external drive is sometimes confusing the bootloader (or whatever it's called in the Mac world) and is the source of my problems. I am open to suggestions.
Thanks in advance,
Bryan

Well, I eliminated one problem: the external HDD was indeed formatted NTFS. I just installed a new external HDD formatted FAT32, connected by firewire, so I was able to take one USB device out of the system (and free up two USB ports). So far the computer is booting properly with no hangs and I am able to access, read, and modify documents from the ext drive when I am in SL.
Also, just for giggles, I ordered an Apple keyboard to further reduce incompatability risks (and to get the Apple shortcut keys. However, I am not parting with my Logitech mouse: must have two buttons.
We'll see if the problems occurs again.

Photos get all blurry when switching between "100%" and "Fit to Screen"

Hello,
I downloaded the Aperture 3 Testversion and I'm trying to create a new book. I managed to design all the pages but when I switch between the views the photos get all blurry until I zoom in and out of the photo.
I was wondering if anybody knows if it will affect the print out version and if I can do something that they aren't blurry when I get my copy?
Thank you for your help.
Tim

I have also noticed this.
Click the print button in the book layout window.
In the print dialog, choose PDF>open pdf in Preview.
I presume this shows a reasonably accurate facsimile of how the images will appear when printed.

Word Wrap Lost When Switching Between XML and Author Views

I compose DITA topics in the XML view with the word wrap option selected. If I switch to the Author view to check something and then return to the XML view, my nicely formatted XML view with all the happy element-nesting tabs goes away. I wind up with an ugly chunk of flush-left code and text that's difficult to read. Is there a reason why FM can't remember the tabs and word wrap when I return to the XML view?
I'm relatively new to using FM's structured side for DITA, so perhaps I'm missing the obvious solution to this problem. If you know the answer, I'd appreciate if you'd clue me in.
Thanks!

Sarah,
When you switch from XML to Author (or WYSIWYG) view, FM does not "remember" the XML document at all. Instead, internally it creates a structured FM document with the same element structure (possibly modified by the underlying XML application). When you switch back to XML view, it creates a new XML document from the current element structure, thereby preserving any changes you made in Author View. FM is very conservative about writing white space to XML in order to avoid inserting unwanted significant space.
If you do all your editing in XML View and want to inspect the formatted version of the document without making changes to white space, always make a copy of the XML document (with File > Save As) and use the copy in Author View.
--Lynne

Monitor color profile when switching between LR and PS

I have a calibrated profile in use with PS.PS and LR are set to Adobe RGB color space but I use the calibrated profile. When I export an image from LR to PS it shows the mismatch dialogue box: Embedded Adobe RGB 1998, Working: Monitor calibrated profile.
should I use the 1)embedded profile instead of working space, 2)convert to working space or 3)discard embedded profile? I will obviously reimport to LR when finished in PS.

>it shows the mismatch dialogue box: Embedded Adobe RGB 1998, Working: Monitor3-7-08.
Ow, this means you have Photoshop set up incorrectly. Go to Edit->Color settings and make sure that the top-profile (RGB) says adobeRGB. You should never have a monitor profile there except if you're a web designer.
>DYP, you can change LR colour space to other than ProPhoto as default.
No you cannot. You can only change the default profile Lightroom uses to send to Photoshop. Lightroom ALWAYS uses a prophotoRGB-like working space internally for every picture.
>I set it to Adobe RGB to sync with camera and PS.
If you shoot RAW, the in-camera setting does not matter and Lightroom will render as wide as prophotoRGB.
>Would changing to ProPhoto colour space not cancel my calibrated monitor profile? Or am I misunderstanding the principles behind monitor calibration?
No, they have nothing to do with each other. Color managed apps automatically translate between their working space and the monitor profile. This capability is the basic meaning of being color managed. They get the information about the monitor profile from the OS. You never have to tell them about it. Photoshop just knows it. You do not have to set it up anywhere.

Conflicting available HDD space when switching between Native and Emulation

I have installed Bootcamp and Windows 7 Home 64-bit. I have found one issue...
When I am booted into Mac and using VMware Fusion, my Bootcamp partition indicates I have 16Gb free of the 32Gb partition. This is what I expected. This also seems to be the case when using WIndows to check available space.
However...
When I natively boot into Windows, Windows indicates I have less than 2Gb free, which seems strange because I don't know where this space seems to have gone...
Any clues out there?

Thanks for the reply.
I do not have a file in that location. I do have one here though...
Hard Drive/Users/My Account/Library/Application Support/VMware Fusion/Virtual Machines/Boot Camp/Bootcamp.vmwarevm
Is this the same thing?
When I have Bootcamp running using Fusion the Bootcamp drive on my desktop disappears. Is this normal?
When the Drive is available it says I have less than 2Gb free. However when I do a check within Windows running through fusion it says I have 13Gb free.
I just want to know how much space I have left and if it is really 2gb, where did it all go? Windows 7 Surely does not take up 20Gb of space!

Presentation Director loses settings when switching between Chinese and English

I've done the "Install files for East Asian languages" and then set the "Language for non-Unicode programs" to "Chinese (PRC)". I do this for our presales people so they can show our prospects that our software is translated (for those that have plants in China and the US). I have the default language set to English. I don't believe it's relevant but I should also mention that this is on a Lenovo T61 with XP-SP3.
When I use the Presentation Director (Fn+F7) most of the screen shows in Chinese. The ones I've added show in English (I have a screen snapshot). I also get Chinese characters in other Lenovo utilities as well.
So I figured I'd just change the "Language for non-Unicode programs" back to English, reboot, and the display would be OK. Not so! The display is in English all right, but NOTHING appears in the window - none of the default settings, none that I added, JUST NOTHING! I have a snapshot of this as well.
I changed the Unicode setting back to Chinese, reboot, and Presentation Director shows all of them still there, some in Chinese and some in English like before.
Does anyone have any ideas how I can get the Presentation Director utility to display properly (in English) and show all the original settings as well? Obviously the settings are stored somewhere since when Chinese is turned on it can display them.
Thanks in advance!
Tim

i was wondering if you could give me a quick overview of how to write characters
Check out this site:
http://www.yale.edu/chinesemac/
http://www.yale.edu/chinesemac/pages/input_methods.html#Apple

Why do the relative values of RGB and CMYK change when switching between Photoshop and InDesign?

I'm trying to put together a Colour Guide for my company's brand guidelines.
I initially worked from InDesign and wrote down all the H, RGB, and CMYK values that I got when I eye-dropped my original colour palette.
However when I put the same RGB values into Photoshop- I am given a (slightly) different set of CMYK numbers from those that I had originally documented in InDesign.
Why is this???

Jamie,
in Photoshop go to Edit > Color Settings and choose your parameters:
For RGB: sRGB or AdobeRGB (1998)
For CMYK: the process as recommended by your printer (person, company)
For offset printing this is here ISOCoated-v2-eci and elsewhere for instance SWOP.
For digital printing you should ask the company as well.
For Grayscale: Gray Gamma 2.2
For Spot: probably irrelevant in the moment. Dot Gain 20%
Everything as shown here:
For your application I've modified my settings a little, therefore we can see top left 'unsynchronized'.
In InDesign do practically the same, but there are no settings for Grayscale.
You'll find for any topic explanations if you move to by mouse (position the pointer over ...).
The field 'Settings' shows not 'Custom' but the file name of a configuration which had been previously saved
and then loaded (buttons top right).
Further explanations on request. It would be quite useless to explain everything now at the same time.
The colors will be wrong if the settings are not synchronized. Above they are explicitly synchronized.
Because Bridge was not used, the system considers them as 'not synchronized', which doesn't matter.
Best regards --Gernot Hoffmann

Automatic switch between 720p and 1080i

I just got FiOS installed today and as I was going through the menu, I noticed that for the video resolution, you are forced to pick a format. Is there a way to set it up so that the STB automatically picks the resolution that the broadcaster has chosen? I don't want to watch everything in 1080i or 720p. I'd like to watch it as the channel has chosen to send the signal
Solved!
Go to Solution.

Unfortunately no.
My suggestion is to try both and stick with the one that looks best on the most channels that you regularly watch. I have a 720p LCD but the 1080i setting in my DVR provides the best HD picture by just a little bit.
Also, you have an option you can set for the SD channels (SD Override). I prefer OFF, which means that the SD channels are sent to my TV also using 1080i. This results in a slightly worse SD picture than using 480i or 480p, but eliminates the extremely annoying 2-4 second delay (HDMI re-sync) when switching between HD and SD channels. Again, I suggest you try the various settings and pick the one that you like best (or hate less?)
Justin
Verizon FiOS TV, Internet, and phone
QIP6416-P1, IMG 1.7C, Build 09.83
Keller, TX 76248

Automatic switch between personal and business mod...

Hello,
I appreciate particularly the personal / business home screen content differentiation on the E55. My wife uses E75 and appraises it as well. We have a problem though: it is quite boresome to have to switch manually when you leave or come home.
Does anyone know that can be done automatically, for example during business days and hours ?
Thanks
Daniel

Unfortunately no.
My suggestion is to try both and stick with the one that looks best on the most channels that you regularly watch. I have a 720p LCD but the 1080i setting in my DVR provides the best HD picture by just a little bit.
Also, you have an option you can set for the SD channels (SD Override). I prefer OFF, which means that the SD channels are sent to my TV also using 1080i. This results in a slightly worse SD picture than using 480i or 480p, but eliminates the extremely annoying 2-4 second delay (HDMI re-sync) when switching between HD and SD channels. Again, I suggest you try the various settings and pick the one that you like best (or hate less?)
Justin
Verizon FiOS TV, Internet, and phone
QIP6416-P1, IMG 1.7C, Build 09.83
Keller, TX 76248

OWA - save menu disappears when switching between calendar and mail

Similar Messages

Maybe you are looking for