OWSM Policy in OSB

I am trying to build a sample OSB service having the OWSM policy attached to it.I am using the option of "From OWSM Policy Store " and used the policy oracle/wss_username_token_service_policy.
When i tried to exceute the OSB,i am getting an error as
"oracle.wsm.policymanager.PolicyManagerException: WSM-02128 : Cannot read WSDL. [Possible Cause : unknown protocol: servicebus]"
Looking like,some issue with the parsing of the WSDL that i used upon the service.Do i need to refer the wsdl from MDS.If,yes how can i do that in OSB.

You may refer below blog for configuration -
http://niallcblogs.blogspot.com/2010/07/osb-11g-and-wsm.html
Regards,
Anuj

Similar Messages

Probem attaching OWSM Policy to OSB Proxy Service

Hi all,
I am working with OSB 11g R1 and I am trying secure one proxy service by attaching one OWSM predefined policy. However, the "OWSM Policy Binding" is disabled in the Policy section of the proxy service.
I found this thread in the forum [1] wich seems to have the same problem and I have checked that all the extensions are installed in my domain.
Sure I missing something but I haven't found anything in the docs.
Any tip or hint is appreciated
Thanks in advance
My enviroment:
- Weblogic Server (10.3.4.0)
- Oracle Service Bus (11.1.1.4)
- Oracle Service Bus OWSM Extension (11.1.1.0)
[1] OWSM Policy Binding Disabled for proxy/business server with SOAP 1.1
Edited by: user10102092 on 27-jul-2011 2:42

I presume you already did a fresh restart of the managed servers?Yeap, I've restarted the OSB server.
Looking at the logs I can find this message:
+####<Jul 27, 2011 1:25:52 PM CEST> <Info> <Common> <mydomain.com> <osb_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <0000J5fLsXLFw0WFLzNM8A1EBzMW000001> <1311765952760> <BEA-000628> <Created "1" resources for pool "mds-owsm", out of which "1" are available and "0" are unavailable.>+
So I understand that the pool is created correctly, isn't it?

Doubt in implementing OWSM policy in osb 11g

Hi,
Can anybody tell me how to implement basic username-token policy in wsdl based paroxy service in osb 11 G.
I am able to select service policy configuartion from the policies tab of proxy service in sb console,but after that i can not find any OWSM policy there to add.Pls assist me

have you run rcu to create mds storage for the policies?
and after that you run the configuration wizard to expand your domain with "Oracle Service Bus OWSM Extension" ?

Issue while attaching OWSM policy to OSB Business Service

How to configure OWSM policy to NON WSDL based Business service.
We are not able to encrypt the data for NON WSDL based Business service.
Please help.
Thanks,
Mihir

I presume you already did a fresh restart of the managed servers?Yeap, I've restarted the OSB server.
Looking at the logs I can find this message:
+####<Jul 27, 2011 1:25:52 PM CEST> <Info> <Common> <mydomain.com> <osb_server1> <[ACTIVE] ExecuteThread: '0' for queue: 'weblogic.kernel.Default (self-tuning)'> <<anonymous>> <> <0000J5fLsXLFw0WFLzNM8A1EBzMW000001> <1311765952760> <BEA-000628> <Created "1" resources for pool "mds-owsm", out of which "1" are available and "0" are unavailable.>+
So I understand that the pool is created correctly, isn't it?

Attaching OWSM Policy to OSB Services

Hi,
Can anyone please share the detailed procedure of how to attach the OWSM policy to a Proxy Service in OSB 11g.
The documentaion of OSB 11g doesnt provide the information of attaching the OWSM polic to OSB services.
please refer
http://download.oracle.com/docs/cd/E14571_01/doc.1111/e15866/owsm.htm#CHDBIJHD
I created a Custom Policy with the predefined assertion wss_username_token_service_template .
But i couldnt find a way to attach this policy to OSB Service. Also the OSB 11g Documentation didnt help much.
Thanks in Advance

Hi All,
I figured out a way of how to attach the OWSM policy to a prox service.
Its pretty simple in that way.
After you create a proxy service, Click on the proxy you created which opens the "View a Proxy Service" page.
In that there are many tabs such as
1. Configuration Details
2. Operational Settings
3. SLA Alert Rules
4. Policies
5. Security
In Policies tab, you can select "OWSM Policy Bindings" and then choose the policy you want.
The only thing bothering me now is how to test it?
I have used the following assertion to create the policy "wss_username_token_service_template "
Any help would be appreciated.
Cheers.

OWSM Policy Binding Disabled for proxy/business server with SOAP 1.1

Hi,
I am using 11pPS2.
In osb, i created a proxy service with soap 1.1. and business proxy with soap 1.1
Now I click Policies tab of each service,
In Service Policy Configuration,
OWSM Policy Bindings is disabled to choose.
So I can't attach any OWSM policy to osb service.
Only Custom Policy bidings are enabled.
appreciate any help and comments on this issue

Need check if you Extend your Oracle Service Bus domain with Oracle Web Services Manager and Oracle Enterprise Manager.
Select the following domain templates when running the Oracle Fusion Middleware Configuration Wizard
Oracle Service Bus OWSM Extension
Oracle WSM Policy Manager (automatically selected when you select the OWSM Extension)
Oracle Enterprise Manager (optional, needed for creating and managing Oracle Web Services Manager policies)

OWSM policy configurations export mechanism

Hi,
We have a requirement of applying owsm policies on OSB 11g proxy and business services.
What is the best way to apply policies is it at
1. Design time (in eclipse)
2.Run time from from SB console
When we shift the entire OSB projects from development environment to production how does migration takes place is it a project level configuration or server level configuration.
Do we have two configuration files.
1. one is OWSM policy configuration file and
2. OWSM policy and OSB project configuration file.
If above is the scenario we cna directly edit the config files instaed of changing the OSB project artefacts.
Any suggetsions on OSB and OWSM policy configurations and environment chnge setup process will be of great help.
Thanks,
Sowmya

Ok got it! Just followed the oracle documentation and copied it in below path and Jdev 11.1.1.4 picked it up!
C:\Users\Amit\AppData\Roaming\JDeveloper\system11.1.1.4.37.59.23\DefaultDomain\oracle\store\gmds\owsm\policies (not copying it within oracle folder within policies as its a custom policy)
Strange, I have Jdev 11.1.1.3 in office and it doesnt pick up the policy but Jdev 11.1.1.4 (at home) picks it up without a problem.
is this a bug in Jdev 11.1.1.3 or my jdev in offic is corrupt?

Osb proxy service with owsm policy auth slow when soap request very large

I have a proxy service which is security with owsm policy: oracle/wss_username_token_service_policy, the proxy service simply route to Business Service which directly invoke a bpel exposed web service, when I call the proxy service with soap envelope large than 15MB(not attachment), waiting about 4~5 minutes, the bpel instance created ; but when I remove the security policy:oracle/wss_username_token_service_policy, it will cost only 20 seconds, why authentication cost so long? How can I deal with the problem?
My English is poor, please don't mind!
besides, with my OSB version is 11.1.1.6.0

I finally figured it out. The nullpointer exception is related to the SAML assertion. The SAML assertion in my requests is signed with embedded signature and this seems to be not supported with the used OWSM policy. Without the signature is the exception gone.
Marian

OSB: Custom OWSM policy with Assertions

I have created a custom policy. It does nothing, but just prints Test message.
I have put the policy implementation in a .jar archive and placed that in the domain's lib directory. Then I have imported the policy to the OWSM in the EM console. All the servers were restarted.
I have created a business service, and a proxy. In the business service policy tab, I have attached my policy as a OWSM Policy Bindings.
When I try to test this biz service from test console, I get an error "Assertion Executor not found!"
I'm posting a stack trace:
<Sep 25, 2012 5:33:42 PM IST> <Error> <oracle.wsm.policyengine.impl.runtime.WSPolicyRuntimeExecutor> <BEA-000000> <Assertion Executor not found!>
<Sep 25, 2012 5:33:42 PM IST> <Error> <oracle.wsm.resources.enforcement> <WSM-07501> <Failure in Oracle WSM Agent processRequest, category=security, function=agent.function.client, application=CustomAssertionPOC, composite=null, modelObj=DummyPortBindingQSService, policy=null, policyVersion=null, assertionName=null.
oracle.wsm.common.sdk.WSMException: WSM-07604 : Internal error during policy enforcement.
     at oracle.wsm.policyengine.impl.runtime.WSPolicyRuntimeExecutor.populateAssertionExecutors(WSPolicyRuntimeExecutor.java:266)
     at oracle.wsm.policyengine.impl.runtime.WSPolicyRuntimeExecutor.populateAssertionExecutors(WSPolicyRuntimeExecutor.java:285)
     at oracle.wsm.policyengine.impl.runtime.WSPolicyRuntimeExecutor.init(WSPolicyRuntimeExecutor.java:168)
     at oracle.wsm.policyengine.impl.PolicyExecutionEngine.getPolicyExecutor(PolicyExecutionEngine.java:137)
     at oracle.wsm.policyengine.impl.PolicyExecutionEngine.execute(PolicyExecutionEngine.java:101)
     at oracle.wsm.agent.WSMAgent.processCommon(WSMAgent.java:1001)
     at oracle.wsm.agent.WSMAgent.processRequest(WSMAgent.java:470)
     at oracle.wsm.agent.handler.WSMEngineInvoker.handleRequest(WSMEngineInvoker.java:373)
     at com.bea.wli.sb.security.wss.wsm.WsmOutboundHandler$1.run(WsmOutboundHandler.java:217)
     at com.bea.wli.sb.security.wss.wsm.WsmOutboundHandler$1.run(WsmOutboundHandler.java:215)
     at java.security.AccessController.doPrivileged(Native Method)
     at oracle.security.jps.util.JpsSubject.doAs(JpsSubject.java:208)
     at com.bea.wli.sb.security.wss.wsm.WsmOutboundHandler.processRequest(WsmOutboundHandler.java:214)
     at com.bea.wli.sb.test.service.wss.WssHandler.processRequest(WssHandler.java:279)
     at com.bea.wli.sb.test.service.ServiceMessageBuilder.buildMessage(ServiceMessageBuilder.java:180)
     at com.bea.wli.sb.test.service.ServiceMessageBuilder.buildMessage(ServiceMessageBuilder.java:99)
     at com.bea.wli.sb.test.service.ServiceMessageSender.send0(ServiceMessageSender.java:261)
     at com.bea.wli.sb.test.service.ServiceMessageSender.access$000(ServiceMessageSender.java:79)
     at com.bea.wli.sb.test.service.ServiceMessageSender$1.run(ServiceMessageSender.java:137)
     at com.bea.wli.sb.test.service.ServiceMessageSender$1.run(ServiceMessageSender.java:135)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:146)
     at com.bea.wli.sb.security.WLSSecurityContextService.runAs(WLSSecurityContextService.java:55)
     at com.bea.wli.sb.test.service.ServiceMessageSender.send(ServiceMessageSender.java:140)
     at com.bea.wli.sb.test.service.ServiceProcessor.invoke(ServiceProcessor.java:454)
     at com.bea.wli.sb.test.TestServiceImpl.invoke(TestServiceImpl.java:172)
     at com.bea.wli.sb.test.client.ejb.TestServiceEJBBean.invoke(TestServiceEJBBean.java:167)
     at com.bea.wli.sb.test.client.ejb.TestService_sqr59p_EOImpl.__WL_invoke(Unknown Source)
     at weblogic.ejb.container.internal.SessionRemoteMethodInvoker.invoke(SessionRemoteMethodInvoker.java:40)
     at com.bea.wli.sb.test.client.ejb.TestService_sqr59p_EOImpl.invoke(Unknown Source)
     at com.bea.wli.sb.test.client.ejb.TestService_sqr59p_EOImpl_WLSkel.invoke(Unknown Source)
     at weblogic.rmi.internal.ServerRequest.sendReceive(ServerRequest.java:174)
     at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:345)
     at weblogic.rmi.cluster.ClusterableRemoteRef.invoke(ClusterableRemoteRef.java:259)
     at com.bea.wli.sb.test.client.ejb.TestService_sqr59p_EOImpl_1036_WLStub.invoke(Unknown Source)
     at com.bea.alsb.console.test.TestServiceClient.invoke(TestServiceClient.java:174)
     at com.bea.alsb.console.test.actions.DefaultRequestAction.invoke(DefaultRequestAction.java:117)
     at com.bea.alsb.console.test.actions.DefaultRequestAction.execute(DefaultRequestAction.java:70)
     at com.bea.alsb.console.test.actions.ServiceRequestAction.execute(ServiceRequestAction.java:143)
     at org.apache.struts.action.RequestProcessor.processActionPerform(RequestProcessor.java:431)
     at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor.access$201(PageFlowRequestProcessor.java:97)
     at org.apache.beehive.netui.pageflow.PageFlowRequestProcessor$ActionRunner.execute(PageFlowRequestProcessor.java:2044)
Is there anything I am doing wrong.

Have you put the generated jar on the classpath?
In the weblogic setDomainEnv.cmd put a row like this:
set POST_CLASSPATH=d:\Middleware\SOASuite11gR1PS4\user_projects\domains\base_domain\lib\YOURPOLICY.jar;%POST_CLASSPATH%

Securing web services SOAP headers against OWSM policy

Hi,
I need to authenticate the user against the OWSM policy. The caller will pass username and password in SOAP headers and I need to attach WSS policy to my exposed web service.
How to extract the Header information and then validate them against the policy.
A simple HelloWorld sample will be of great help.
regards
Sanjeev

Hi,
For service authentication add policy wss_username_token_service_policy to client composite.Create user in security realms in adminstration console.
While testing the service select wss username token option under security tab and test with valid credentails or from, soap UI
<wsse:Security xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd"
xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd">
<wsse:UsernameToken xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd">
<wsse:Username>USER CREATED IN SECURITY REALMS</wsse:Username>
<wsse:Password Type="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-username-token-profile-1.0#PasswordText">PSWD ENTERED FOR THE SAME USER IN SECURITY REALMS</wsse:Password>
</wsse:UsernameToken></wsse:Security> WITH INPUT

HTTP 503 after enabling OWSM policy on an ADF BC Service

I deployed an ADF BC Service to soa_server1 and tested (no problem). But when I added an OWSM policy, I could no longer access the service, nor its WSDL contract.
Here's the steps:
1. Deploy and test your ADF BC Service with no policy
2. In EM, go to the Web Services menu item for the deployed service application, then Policies tab.
3. Attach the "oracle/log_policy" policy to the service's endpoint
4. Restart the application after saving the change (as EM tells you to do).
5. Try to access your Service and/or the Service's WSDL ==> *503 Error*
6. Use EM to Detach the policy on the service's endpoint
7. Restart the application after saving the change
8. Retest -- works fine.

Note that I can apply the same policy at Develop-Time and deploy and that works. i.e. Specific to Attaching the policy through EM.
Actually, Firefox fooled me with a browser cache. The same problem occurs whether the policy is applied at Develop-Time or through EM.
-Todd
Edited by: tbeets on May 22, 2009 1:29 PM

OWSM POlicy -11g

Hi All,
We are working on attaching OWSM policies of SOA suite 11g to secure the composites.
Attached 'oracle/wss10_saml_token_service_policy' to the composite keeping configurations as default in saml login module.
When we are trying to test this composite with the below payload
<soap:Envelope xmlns:soap="http://schemas.xmlsoap.org/soap/envelope/"> <soap:Header> <wsse:Security xmlns:wsse="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-secext-1.0.xsd"> <saml:Assertion xmlns:saml="urn:oasis:names:tc:SAML:1.0:assertion" AssertionID="Id-00000127b711fabc-0000000001bda657-2" IssueInstant="2010-04-01T01:52:41Z" Issuer="www.oracle.com" MajorVersion="1" MinorVersion="1"> <saml:Conditions NotBefore="2010-04-01T01:52:41Z" NotOnOrAfter="2010-04-06T01:52:41Z"/> <saml:AuthenticationStatement AuthenticationMethod="urn:oasis:names:tc:SAML:1.0:am:unspecified" AuthenticationInstant="2010-04-01T01:52:41Z"> <saml:Subject> <saml:NameIdentifier Format="urn:oasis:names:tc:SAML:1.1:nameid-format:X509SubjectName">orcladmin</saml:NameIdentifier> <saml:SubjectConfirmation> <saml:ConfirmationMethod>urn:oasis:names:tc:SAML:1.0:cm:sender-vouches</saml:ConfirmationMethod> </saml:SubjectConfirmation> </saml:Subject> </saml:AuthenticationStatement> <saml:AttributeStatement> <saml:Attribute Name="username" NameFormat="www.oracle.com"> <saml:AttributeValue>weblogic</saml:AttributeValue> </saml:Attribute> <saml:Attribute Name="password" NameFormat="www.oracle.com"> <saml:AttributeValue>Password1</saml:AttributeValue> </saml:Attribute> </saml:AttributeStatement> </saml:Assertion> </wsse:Security> </soap:Header> <soap:Body> <cli:process xmlns:cli="http://xmlns.oracle.com/UserProvisioning_jws/Project1/BPELProcess1"> <cli:input>abc</cli:input> </cli:process> </soap:Body> </soap:Envelope>
it is throwing an error
OWSM Policy Fault : FailedAuthentication : The security token cannot be authenticated.
Do we need to make any changes in the input payload or configuration files.
Any pointers on the same will be more helpfull.
Thanks,
Sowmya

Ok got it! Just followed the oracle documentation and copied it in below path and Jdev 11.1.1.4 picked it up!
C:\Users\Amit\AppData\Roaming\JDeveloper\system11.1.1.4.37.59.23\DefaultDomain\oracle\store\gmds\owsm\policies (not copying it within oracle folder within policies as its a custom policy)
Strange, I have Jdev 11.1.1.3 in office and it doesnt pick up the policy but Jdev 11.1.1.4 (at home) picks it up without a problem.
is this a bug in Jdev 11.1.1.3 or my jdev in offic is corrupt?

How to add WS Security Policy in OSB

Hi all,
How to add WS Security Policy in OSB tht has username and Password??
Thanks,
Kiran

http://docs.oracle.com/cd/E13159_01/osb/docs10gr3/security/ws_policy.html

Attaching OWSM policy to only request side

Hi all,
I am using OSB11gr1 with OWSM extended domain. Is there a way to attach OWSM policy to only request side?
I am using wss11_x509_token_with_message_protection_client_policy. Can I override this policy somehow to disable message protection on the response side. I looked into policy editor in OEM, there are ways to disable signing/encrypting body/header but not found any way to disable the message protection policy on response side completely
Please suggest

You can attach Oracle Web Services Manager policies only at the service level, and you cannot embed them in service WSDLs.
Regards,
Anuj

OWSM problem in OSB 11g

I'm running Oracle Service Bug 11gR1 PS3 (11.1.1.4). At installation I choose the domain extension options to enable for OWSM and also included EM to act as an OWSM, but in Proxy service i am not able to see policy tab.
Please suggest me that any configuration i have to do.
Thanks in advance

OWSM for OSB is supported only for SOAP based services.

OWSM Policy in OSB

Similar Messages

Maybe you are looking for