P1i uploud faild
My p1i appears competly dead after running update service.I ve tried removing battery,flly charging, plz help
Try running the update service again and see if your phone comes back to life.
Similar Messages
-
How to get record control in sony ericsson p1i.
How to get record control in sony ericsson p1i....
does jsr234 helps??I'm not sure it is possible to get the PL/SQL record type through JDBC. Please try to access this procedure through JDBC to see if it is possible.
You may need to convert the record type, to an object-type, i.e. wrap the procedure in another procedure that converts the record type. You could also just wrap the procedure in another that expands the record values into individual output parameters. -
When I want to release the chanage request,return code 0232.I reconfigure stms,and the error still exist.
In the case,I check the tracsport tool.find the tp connect to db faild.
eror log:
Test call of transport control program (tp) ended with return code 0232
Message no. TK094
Diagnosis
Your transport request could not be exported, since all requirements were not fulfilled.
Calling the transport control program tp
"tp EXPCHK D01K904258 pf=/usr/sap/trans/bin/TP_DOMAIN_D01.PFL -Dtransdir=/usr/sap/tr"
which checks the export requirements, returned the following information:
Return code from tp: 0232
Error text from tp: ERROR: Connect to D01 failed (20100527085439, prob
System Response
Further processing is terminated.
Procedure
Check the following points:
Feasibility of the transport control program tp
Parameter settings in the transport profile
Availability of the transport directory and the subdirectories (cofiles, data, log, sapnames, bin)
Write authorization for the subdirectories
Write authorization for the files of the subdirectories cofiles, data, log, sapnames
Release the request again when the error has been removed
I check transport tool and the tp conn error,log:
This is tp version 372.04.04 (release 700, unicode enabled)
Warning: Parameter DBLIBPATH is no longer used.
ERROR: Connect to D01 failed (20100527082234, probably wrong environmen).
TRACE-INFO: 1: [dev trc ,00000] Thu May 27 08:22:34 2010
TRACE-INFO: 2: [dev trc ,00000] load shared library (/usr/sap/D01/SYS/exe/run/dbora
TRACE-INFO: 3:
TRACE-INFO: 4: [dev trc ,00000] Got
LIBPATH=/usr/sap/D01/DVEBMGS00/exe:/usr/sap/D01/DVEBMGS00/exe:/usr/lib:/usr/sap/D01
lient from environment
TRACE-INFO: 5:
TRACE-INFO: 6: [dev trc ,00000] Oracle Client Version: '10.2.0.2.0'
TRACE-INFO: 7: [dev trc ,00000] >oci_initialize (con_hdl=0)
TRACE-INFO: 8: [dev trc ,00000] Client NLS settings: AMERICAN_AMERICA.UTF8
TRACE-INFO: 9: [dev trc ,00000] Logon as OPS$-user to get SAPSR3's password
TRACE-INFO: 10: [dev trc ,00000] Connecting as /@D01 on connection 0 (nls_hdl 0) ..
TRACE-INFO: 11:
TRACE-INFO: 12: [dev trc ,00000] Nls CharacterSet NationalCharSet
ErrHpBatch
TRACE-INFO: 13:
TRACE-INFO: 14: [dev trc ,00000] 0 UTF8
0x110e96310
TRACE-INFO: 15:
TRACE-INFO: 16: [dev trc ,00000] Allocating service context handll=0
TRACE-INFO: 14: [dev trc ,00000] 0 UTF8
0x110e96310
TRACE-INFO: 15:
TRACE-INFO: 16: [dev trc ,00000] Allocating service context handle for con_hdl=0
TRACE-INFO: 17: [dev trc ,00000] Allocating server context handle
TRACE-INFO: 18: [dev trc ,00000] Attaching to DB Server D01 (con_hdl=0,svchp=0x110e
TRACE-INFO: 19:
TRACE-INFO: 20: [dboci.c ,00000] *** ERROR => OCI-call 'OCIServerAttach' failed wit
TRACE-INFO: 21:
TRACE-INFO: 22: [dbsloci. ,00000] *** ERROR => CONNECT failed with sql error '12541'
TRACE-INFO: 23: [dev trc ,00000] set_ocica() -> OCI or SQL return code 12541
TRACE-INFO: 24: [dev trc ,00000] Try to connect with default password
TRACE-INFO: 25: [dev trc ,00000] Connecting as SAPSR3/<pwd>@D01 on connection 0 (nl
TRACE-INFO: 26:
TRACE-INFO: 27: [dev trc ,00000] Nls CharacterSet NationalCharSet
ErrHpBatch
TRACE-INFO: 28:
TRACE-INFO: 29: [dev trc ,00000] 0 UTF8
0x110e96310
TRACE-INFO: 30:
TRACE-INFO: 31: [dev trc ,00000] server_detach(con_hdl=0,stale=0,svrhp=0x110e99e60)
TRACE-INFO: 32: [dev trc ,00000] Detaching from DB Server (con_hdl=0,svchp=0x110e99
TRACE-INFO: 33:
TRACE-INFO: 34: [dev trc ,00000] Deallocating server context handle 0x110e99e60
TRACE-INFO: 35: [dev trc ,00000] Allocating server context handle
TRACE-INFO: 36: [dev trc ,00000] Attaching to DB Server D01 (con_hdl=0,svchp=0x110e
TRACE-INFO: 37:
TRACE-INFO: 38: [dboci.c ,00000] *** ERROR => OCI-call 'OCIServerAttach' failed wit
TRACE-INFO: 39:
TRACE-INFO: 40: [dbsloci. ,00000] *** ERROR => CONNECT failed with sql error '12541'
TRACE-INFO: 41: [dev trc ,00000] set_ocica() -> OCI or SQL return code 12541
TRACE-INFO: 42: [dblink ,00431] ***LOG BY2=>sql error 12541 performing CON [dblin
TRACE-INFO: 43:
TRACE-INFO: 44: [dblink ,00431] ***LOG BY0=>ORA-12541: TNS:no listener [dblink#5 @
tp returncode summary:
TOOLS: Highest return code of single steps was: 0
ERRORS: Highest tp internal error was: 0232
standard output from tp and from tools called by tp:LOG BY0=>ORA-12541: TNS:no listener [
Is your system up. From the above error it seems that listner is not running. -
Is it ever possible to pair my SE P1i and my iPod Touch 4g?
I want to use SE P1i as bluetooth modem
it worked fine with another pocket PCs
I bought iPod Touch 4G
I'm really happy with it
I don't want to use any other pocket PCs anymore
I want to shift to iPod Touch only
but, I can't pair them
P1i recognize iPod as "headset"
I googled and I found that jailbreak is only way?
but, I don't want to use jailbreak, I want to stay legal user etc
may be I must buy some software in iTunes? I'm ready for it -> I don't want "free jailbreak"
but, I have no idea about this software name?
or ...
what should I do?
Can anyone help me?The bluetooth profiles on the iPod do not permit that except for BT tethering to an iPhone. See:
iPhone, iPad, iPod touch: Supported Bluetooth profiles -
I have problem with my ipad , when i want to update ios 6 to 6.0.1 this message appear " unable to verify update , ios 6.0.1 faild verification because you are no longer connected to the internet" but my ipad is connected . Plz help me .
Not very helpful but I have the same issue. Plugging in and doing the update via. iTunes will probably work but I find that whole experience annoying (downloading apps not on the Mac, etc..)
-
Link outage in Etherchannel causes interface down and failover Secondary Faild
Hi,
I have configured port-channel Firewall ASA5515-X and stacking switch WS-3750X. Also firewall configured as failover mode. Problem is that my active firewall connected switch port show green and working but standby firewall connected switch port shows orange color. When i inpute show failover command on firewall, secondary is faild. Please assist. Here is the below show command.
mdbl-int-fw-01# sho port-channel 10
Ports: 2 Maxports = 16
Port-channels: 1 Max Port-channels = 48
Protocol: LACP/ active
Minimum Links: 1
Maximum Bundle: 8
Load balance: src-dst-ip
mdbl-int-fw-01# sho interface port-channel 10
Interface Port-channel10 "inside", is up, line protocol is up
Hardware is EtherChannel/LACP, BW 2000 Mbps, DLY 10 usec
Auto-Duplex(Full-duplex), Auto-Speed(1000 Mbps)
Input flow control is unsupported, output flow control is off
Description: *** Connected to CORE-SW ***
MAC address 4c00.821d.511f, MTU 1500
IP address 10.98.8.97, subnet mask 255.255.255.248
Traffic Statistics for "inside":
56859 packets input, 3419130 bytes
148709 packets output, 16063580 bytes
56858 packets dropped
1 minute input rate 0 pkts/sec, 46 bytes/sec
1 minute output rate 2 pkts/sec, 216 bytes/sec
1 minute drop rate, 0 pkts/sec
5 minute input rate 0 pkts/sec, 46 bytes/sec
5 minute output rate 2 pkts/sec, 216 bytes/sec
5 minute drop rate, 0 pkts/sec
Members in this channel:
Active: Gi0/1 Gi0/2
mdbl-int-fw-01# sho port
mdbl-int-fw-01# sho port-channel sum
mdbl-int-fw-01# sho port-channel summary
Flags: D - down P - bundled in port-channel
I - stand-alone s - suspended
H - Hot-standby (LACP only)
U - in use N - not in use, no aggregation/nameif
M - not in use, no aggregation due to minimum links not met
w - waiting to be aggregated
Number of channel-groups in use: 1
Group Port-channel Protocol Ports
------+-------------+-----------+-----------------------------------------------
10 Po10(U) LACP Gi0/1(P) Gi0/2(P)
mdbl-int-fw-01#
mdbl-int-fw-01# sho port-channel ?
<1-48> Channel group number
brief Brief information
detail Detail information
port Port information
protocol protocol enabled
summary One-line summary per channel-group
| Output modifiers
<cr>
mdbl-int-fw-01# sho port-channel bri
mdbl-int-fw-01# sho port-channel brief
Channel-group listing:
Group: 10
Ports: 2 Maxports = 16
Port-channels: 1 Max Port-channels = 48
Protocol: LACP/ active
Minimum Links: 1
Maximum Bundle: 8
Load balance: src-dst-ip
mdbl-int-fw-01# sho port-channel ?
<1-48> Channel group number
brief Brief information
detail Detail information
port Port information
protocol protocol enabled
summary One-line summary per channel-group
| Output modifiers
<cr>
mdbl-int-fw-01# sho port-channel pro
mdbl-int-fw-01# sho port-channel protocol
Channel-group listing:
Group: 10
Protocol: LACP
mdbl-int-fw-01# sho port-channel ?
<1-48> Channel group number
brief Brief information
detail Detail information
port Port information
protocol protocol enabled
summary One-line summary per channel-group
| Output modifiers
<cr>
mdbl-int-fw-01# sho port-channel det
mdbl-int-fw-01# sho port-channel detail
Channel-group listing:
Group: 10
Ports: 2 Maxports = 16
Port-channels: 1 Max Port-channels = 48
Protocol: LACP/ active
Minimum Links: 1
Maximum Bundle: 8
Load balance: src-dst-ip
Ports in the group:
Port: Gi0/1
Port state = bndl
Channel group = 10 Mode = LACP/ active
Port-channel = Po10
Flags: S - Device is sending Slow LACPDUs F - Device is sending fast LACPDUs.
A - Device is in active mode. P - Device is in passive mode.
Local information:
LACP port Admin Oper Port Port
Port Flags State Priority Key Key Number State
Gi0/1 SA bndl 32768 0xa 0xa 0x2 0x3d
Partner's information:
Partner Partner LACP Partner Partner Partner Partner Partner
Port Flags State Port Priority Admin Key Oper Key Port Number Port State
Gi0/1 SA bndl 32768 0x0 0xa 0x118 0x3d
Port: Gi0/2
Port state = bndl
Channel group = 10 Mode = LACP/ active
Port-channel = Po10
Flags: S - Device is sending Slow LACPDUs F - Device is sending fast LACPDUs.
A - Device is in active mode. P - Device is in passive mode.
Local information:
LACP port Admin Oper Port Port
Port Flags State Priority Key Key Number State
Gi0/2 SA bndl 32768 0xa 0xa 0x3 0x3d
Partner's information:
Partner Partner LACP Partner Partner Partner Partner Partner
Port Flags State Port Priority Admin Key Oper Key Port Number Port State
Gi0/2 SA bndl 32768 0x0 0xa 0x119 0x3d
mdbl-int-fw-01#
mdbl-int-fw-01#
mdbl-int-fw-01#
mdbl-int-fw-01#
mdbl-int-fw-01# sho port-channel ?
<1-48> Channel group number
brief Brief information
detail Detail information
port Port information
protocol protocol enabled
summary One-line summary per channel-group
| Output modifiers
<cr>
mdbl-int-fw-01# sho fail
mdbl-int-fw-01# sho failover st
mdbl-int-fw-01# sho failover state
State Last Failure Reason Date/Time
This host - Primary
Active None
Other host - Secondary
Failed Ifc Failure 22:03:03 UTC Jan 8 2014
outside: No Link
dmz: No Link
mgt: No Link
inside: No Link
====Configuration State===
Sync Done
====Communication State===
Mac set
mdbl-int-fw-01#
mdbl-int-fw-01#
mdbl-int-fw-01#
mdbl-int-fw-01# sho failover
Failover On
Failover unit Primary
Failover LAN Interface: failover GigabitEthernet0/3 (up)
Unit Poll frequency 200 milliseconds, holdtime 800 milliseconds
Interface Poll frequency 500 milliseconds, holdtime 5 seconds
Interface Policy 1
Monitored Interfaces 4 of 114 maximum
failover replication http
Version: Ours 8.6(1)2, Mate 8.6(1)2
Last Failover at: 02:16:48 UTC Jan 8 2014
This host: Primary - Active
Active time: 74479 (sec)
slot 0: ASA5515 hw/sw rev (1.0/8.6(1)2) status (Up Sys)
Interface outside (118.179.139.4): No Link (Waiting)
Interface dmz (10.98.56.3): No Link (Waiting)
Interface mgt (10.10.11.1): Unknown (Waiting)
Interface inside (10.98.8.97): Normal (Waiting)
slot 1: IPS5515 hw/sw rev (N/A/7.1(4)E4) status (Up/Up)
IPS, 7.1(4)E4, Up
Other host: Secondary - Failed
Active time: 0 (sec)
slot 0: ASA5515 hw/sw rev (1.0/8.6(1)2) status (Up Sys)
Interface outside (118.179.139.6): No Link (Waiting)
Interface dmz (10.98.56.2): No Link (Waiting)
Interface mgt (0.0.0.0): No Link (Waiting)
Interface inside (10.98.8.98): No Link (Waiting)
slot 1: IPS5515 hw/sw rev (N/A/7.1(4)E4) status (Up/Up)
IPS, 7.1(4)E4, Up
Stateful Failover Logical Update Statistics
Link : failover GigabitEthernet0/3 (up)
Stateful Obj xmit xerr rcv rerr
General 12665 0 9929 0
sys cmd 9929 0 9929 0
up time 0 0 0 0
RPC services 0 0 0 0
TCP conn 0 0 0 0
UDP conn 0 0 0 0
ARP tbl 2735 0 0 0
Xlate_Timeout 0 0 0 0
IPv6 ND tbl 0 0 0 0
VPN IKEv1 SA 0 0 0 0
VPN IKEv1 P2 0 0 0 0
VPN IKEv2 SA 0 0 0 0
VPN IKEv2 P2 0 0 0 0
VPN CTCP upd 0 0 0 0
VPN SDI upd 0 0 0 0
VPN DHCP upd 0 0 0 0
SIP Session 0 0 0 0
Route Session 0 0 0 0
User-Identity 1 0 0 0
Logical Update Queue Information
Cur Max Total
Recv Q: 0 7 9930
Xmit Q: 0 30 99581
mdbl-int-fw-01#
mdbl-int-fw-01#
mdbl-int-fw-01# sho failover state
State Last Failure Reason Date/Time
This host - Primary
Active None
Other host - Secondary
Failed Ifc Failure 22:03:03 UTC Jan 8 2014
outside: No Link
dmz: No Link
mgt: No Link
inside: No Link
====Configuration State===
Sync Done
====Communication State===
Mac set
mdbl-int-fw-01# sho failover ?
descriptor Show failover interface descriptors. Two numbers are shown for
each interface. When exchanging information regarding a
particular interface, this unit uses the first number in messages
it sends to its peer. And it expects the second number in
messages it receives from its peer. For trouble shooting, collect
the show output from both units and verify that the numbers
match.
exec Show failover command execution information
history Show failover switching history
interface Show failover command interface information
state Show failover internal state information
statistics Show failover command interface statistics information
| Output modifiers
<cr>
mdbl-int-fw-01# sho failover inter
mdbl-int-fw-01# sho failover interface
interface failover GigabitEthernet0/3
System IP Address: 10.98.8.89 255.255.255.248
My IP Address : 10.98.8.89
Other IP Address : 10.98.8.90
mdbl-int-fw-01# sho failover stati
mdbl-int-fw-01# sho failover statistics
tx:995725
rx:980617
mdbl-int-fw-01# sho failover hi
mdbl-int-fw-01# sho failover history
==========================================================================
From State To State Reason
==========================================================================
02:16:40 UTC Jan 8 2014
Not Detected Negotiation No Error
02:16:48 UTC Jan 8 2014
Negotiation Just Active No Active unit found
02:16:48 UTC Jan 8 2014
Just Active Active Drain No Active unit found
02:16:48 UTC Jan 8 2014
Active Drain Active Applying Config No Active unit found
02:16:48 UTC Jan 8 2014
Active Applying Config Active Config Applied No Active unit found
02:16:48 UTC Jan 8 2014
Active Config Applied Active No Active unit found
==========================================================================
mdbl-int-fw-01# sho failover
Failover On
Failover unit Primary
Failover LAN Interface: failover GigabitEthernet0/3 (up)
Unit Poll frequency 200 milliseconds, holdtime 800 milliseconds
Interface Poll frequency 500 milliseconds, holdtime 5 seconds
Interface Policy 1
Monitored Interfaces 4 of 114 maximum
failover replication http
Version: Ours 8.6(1)2, Mate 8.6(1)2
Last Failover at: 02:16:48 UTC Jan 8 2014
This host: Primary - Active
Active time: 74554 (sec)
slot 0: ASA5515 hw/sw rev (1.0/8.6(1)2) status (Up Sys)
Interface outside (118.179.139.4): No Link (Waiting)
Interface dmz (10.98.56.3): No Link (Waiting)
Interface mgt (10.10.11.1): Unknown (Waiting)
Interface inside (10.98.8.97): Normal (Waiting)
slot 1: IPS5515 hw/sw rev (N/A/7.1(4)E4) status (Up/Up)
IPS, 7.1(4)E4, Up
Other host: Secondary - Failed
Active time: 0 (sec)
slot 0: ASA5515 hw/sw rev (1.0/8.6(1)2) status (Up Sys)
Interface outside (118.179.139.6): No Link (Waiting)
Interface dmz (10.98.56.2): No Link (Waiting)
Interface mgt (0.0.0.0): No Link (Waiting)
Interface inside (10.98.8.98): No Link (Waiting)
slot 1: IPS5515 hw/sw rev (N/A/7.1(4)E4) status (Up/Up)
IPS, 7.1(4)E4, Up
Stateful Failover Logical Update Statistics
Link : failover GigabitEthernet0/3 (up)
Stateful Obj xmit xerr rcv rerr
General 12676 0 9938 0
sys cmd 9938 0 9938 0
up time 0 0 0 0
RPC services 0 0 0 0
TCP conn 0 0 0 0
UDP conn 0 0 0 0
ARP tbl 2737 0 0 0
Xlate_Timeout 0 0 0 0
IPv6 ND tbl 0 0 0 0
VPN IKEv1 SA 0 0 0 0
VPN IKEv1 P2 0 0 0 0
VPN IKEv2 SA 0 0 0 0
VPN IKEv2 P2 0 0 0 0
VPN CTCP upd 0 0 0 0
VPN SDI upd 0 0 0 0
VPN DHCP upd 0 0 0 0
SIP Session 0 0 0 0
Route Session 0 0 0 0
User-Identity 1 0 0 0
Logical Update Queue Information
Cur Max Total
Recv Q: 0 7 9940
Xmit Q: 0 30 99677Hi Ganesan,
I am proposing a design like this. You can have the STP in pvst mode and have a different priority set for the core switch to make it core a as root bridge. There is nothing wrong with your design you have made you core switch which will be physically down to your firewall... but in real it comes on the top of your firewall as well... But spanning tree conf should be done properly to achieve this... I have proposed my design which is pretty simple but easy for troubleshoot....
You can have your firewalls connected to core switch on the down and can directly connected to router on outside... always core a -->py fw--rtra will be the primary path... if anything goes wrong then secondary line will come in to picture....
make sure that your hsrp will have high priority to ur core a vlan conf for the access switches.....
Please do rate for the helpful posts.
By
Karthik -
im trying to install itunes but it keeps telling me "service 'apple mobile device' failded to start verify that you have sufficient privileges to start system services" how do i fix this?
Try the following user tip:
Troubleshooting issues with iTunes for Windows updates -
Runtime error when syncing P1i with PC
I get a runtime error when syncing my P1i to PC. The error is linked with this file, 'dxp syncml.exe', and the application is said to request the 'Runtime to terminate it in an unusual way'. How do you fix this?
Thanks Joanne. Let me give you feedback on whats happening so far.
After some doing, I discovered that my firewall is controlled by Norton Firewall Provider. (Bear in mind I am a novice in terms of managing these computer protocols). To modify the firewall settings, Norton calls this in their the control panel 'Smart firewall', I go to program control then configure. A list of programs came up with the options to add, modify, remove or rename. I searched the list and found that DXP SyncML.exe and mRouterRuntime.exe were listed and set to 'Auto' in the Access column. I noticed that under access, the options include auto, allow, block and custom. I reasoned that 'allow' is the highest level of access, and to support the sync feature, I changed the status to 'allow' from 'auto' for the DXP SyncML and mRouterRuntime executable files. If you believe it is ok and safer to keep the auto status, advise me.
I did not find in the listing any of these programs; Bearer Abstraction Layer (SCBAL.exe), Generic Device Management Executable (Generic.exe) or Symbian Connect Object Model for Symbian Connect QI (SymbianConnectRuntime.exe).I did a search and located the generic.exe and the other two files under 'common files' in 'teleca shared' folder, and 'symbian' in 'shared' and 'symbianconnectruntime', respectively.
Norton's control panel for Smart Firewall gave me three options when adding programs: allow, block and manual configure internet settings. The last of the three was recommended by Norton. However, I selected 'allow' for the generic.exe, symbianconnectruntim.exe and scba.exe.Please advise if you believe I need to modify the terms I entered to set up this procedure (is there a better setting that allow me to achieve the same level of functionality without compromising my security?)
Now Joanne, whats left is for me to try the sync after making these changes. I feel as if I accomplished a lot by only reaching this far. I will have to do a reinstallation of the SE PC Suite before moving on though. Let me explain.
When the sync failed repatedly because of the unexpected termination linked with the dxp syncml.exe, I uninstalled the SE PC Suite which was done from a disc, and installed a version from the Sony website. That version is 1.6.0, with a copyright date of 2006. With this, the sync worked. By the way I am using Windows 7 Starter. Now what I am going to do later is uninstall this version of the suite, and reinstall the one from the disc that was linked with the problem we are solving. When I do that later, I will give you feedback.
Just in case you are wondering, I have a vested interest in using the PC Suite from the disc. This application works fine for the file manager component where the drive on the phone and removable media card are read. In the 1.6.0 version, I cannot get the file manager to see the phone as connected though when I put the card (is that called M2 disc?) in the phone, it reads. So, I although sync is working with the 1.6.0 version from the website, I want to use the version I have on disc if the sync component gets over the problem we are trying to solve.
Hope I am on the right track so far I thank you profusely for your patience and dealing with my qeurry; the solution will make a world of a difference for me and many other P1i owners. Look foward to the follow up
Rohan Bell -
Hey guys I need help I am trying to get ios 7.0.4 on my iPod touch 5 gen but every time I try downloading it it says download faild and I've rebooted it reset it and cleared storage but it still doesn't work
Try disabling the computer's antivirus and firewall.
- Next try the manual install method of:
iDevice Troubleshooting 101 :: iPhone, iPad, iPod touch
- Then try on another computer -
XML to EXCEL with Conversion agent error: XML to EXCEL PROCCES FAILD
Hello,
I have scenario from Oracle database to Excel.
For this scenario I use with conversion agent by itemfield to transfer data from XML to EXCEL.
The scenario not worked.
Few points:
1. I add the conversion agent module to SAP XI receiver communication channel.
2. When I change the scenario to oracle to xml (without using conversion agent) the scenario works OK.
3. When I drag the CME file to the studio I found the error message: XML to EXCEL PROCCES FAILD.
4. I use with conversion agent in other scenario (EDI to IDOC) without any problem.
5. I'm not found any clue for this problem in XI RWB.
Eladhi Elad,
to do the conversion,you have to define a module and import it into you CC.
also see nexts blog
Yet another "from database or internal table to Excel"
Reading Excel Data from Java Using HSSF API
Reading Excel line items using the jExcel API
Read Excel instead of XML through FileAdapter
Thanks
Rodrigo -
Hello, a cant type anything ,not in photoshop and not in inIllustrator ,I've got a message like "selected font faild during last operation".If problem persists,please desable the font..
Looks like a corrupt font.
Illustrator is more picky about fonts than any other application. -
i'm having issues with reinstalling my itunes.it says that my apple mobile device faild to start and will not go any further
Hey there CrazyTC,
It sounds like you are unable to re install iTunes because the Apple Mobile Device service failed to start. Try restarting it with the following article:
How to restart the Apple Mobile Device Service (AMDS) on Windows
http://support.apple.com/kb/ts1567
Windows Vista or Windows 7
Close iTunes and disconnect the iPhone, iPad, or iPod touch.
Click the Windows Start button .
In the Start Search field type Services.
In the Programs section of the search results, Click "Services".
Select Apple Mobile Device and click Stop the service as shown below:
After the service has stopped, click Start the service.
After the Apple Mobile Device service has started again, open iTunes and connect the device.
Then if the issue is resolved, set the service to start Automatically with the same article.
If it is still not working, use these steps from the same article to completely uninstall iTunes and its associated applications and install a fresh copy.
Remove and reinstall iTunes and AMDS
If the issue continues after restarting AMDS, then you'll need to remove and reinstall AMDS and iTunes.
Completely uninstall AMDS, iTunes, and all Apple software. Click the appropriate links below for steps:
Windows XP
Windows Vista, Windows 7, or Windows 8
Restart the computer.
Download and install (or reinstall) the latest version of iTunes from www.apple.com/itunes. Installing iTunes will also install AMDS.
Restart the computer.
Start iTunes and connect the device. It should be recognized properly in Windows.
Thank you for using Apple Support Communities.
All the very best,
Sterling -
I have 2 old sony ericsson units and i am in need of new parts (lcd for k800, ring flex for p1i). can i still order original parts from sony ericsson?
http://cnn.cn/shop/sonyericsson-k800i-c-28_168.html You can order the LCD screen for the K800 from here--I've used them before and their service is excellent.There are also some P1i spares on the same website.As far as I know, SE doesn't actually supply such spares.
-
just bought this phone to help ff but i found out they are irresponcible.zte is careless about updates, i tried manualy signatur prblm updte faild, no real sport from anyone.i m not that rich .i could have buy food for my famely for all week for the money i payed to help you guys, tried to help you people but i dont see any future in ffos now ,you should respect our help.
Sorry you are having problems and regretting the recent purchase.
Someone may be able to help you in relation to use of the ZTE phone, & use of Firefox OS, but we are unable to advise on consumer law and the possibility of you being able to get a refund. That is totally outside the scope of this forum. We are fellow users of Firefox helping one another to use Firefox.
You will need to contact the retailer & or some local advisor. -
os:linux 64
obiee:bi_windows_x86_111130_64_disk
when create domain faild,
pls help me!!
Creating a new AdminServer Object ...
AdminServer port is 7001
Starting the domain ...
oracle.as.provisioning.util.ConfigException:
Error while starting the domain.
Cause:
An error occurred while starting the domain.
Action:
See logs for more details.
at oracle.as.provisioning.util.ConfigException.createConfigException(ConfigException.java:123)
at oracle.as.provisioning.weblogic.ASDomain.startDomain(ASDomain.java:3177)
at oracle.as.provisioning.weblogic.ASDomain.startDomain(ASDomain.java:3037)
at oracle.as.provisioning.engine.WorkFlowExecutor._startAdminServer(WorkFlowExecutor.java:1646)
at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:636)
at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:392)
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
at oracle.as.install.bi.biconfig.standard.StandardWorkFlowExecutor.executeHelper(StandardWorkFlowExecutor.java:31)
at oracle.as.install.bi.biconfig.standard.DomainProvisioningTask.doExecute(DomainProvisioningTask.java:51)
at oracle.as.install.bi.biconfig.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:79)
at oracle.as.install.bi.biconfig.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
at oracle.as.install.bi.biconfig.BIConfigMain.doExecute(BIConfigMain.java:110)
at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
at java.lang.Thread.run(Thread.java:619)
Caused by: oracle.as.provisioning.util.ConfigException:
Error while starting the domain.
Cause:
Starting the Admin_Server timed out.
Action:
See logs for more details.
at oracle.as.provisioning.util.ConfigException.createConfigException(ConfigException.java:123)
at oracle.as.provisioning.weblogic.ASDomain.startDomain(ASDomain.java:3147)
... 19 more
oracle.as.provisioning.exception.ASProvisioningException
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:872)
at oracle.as.install.bi.biconfig.standard.StandardWorkFlowExecutor.executeHelper(StandardWorkFlowExecutor.java:31)
at oracle.as.install.bi.biconfig.standard.DomainProvisioningTask.doExecute(DomainProvisioningTask.java:51)
at oracle.as.install.bi.biconfig.standard.AbstractProvisioningTask.execute(AbstractProvisioningTask.java:79)
at oracle.as.install.bi.biconfig.standard.StandardProvisionTaskList.execute(StandardProvisionTaskList.java:61)
at oracle.as.install.bi.biconfig.BIConfigMain.doExecute(BIConfigMain.java:110)
at oracle.as.install.engine.modules.configuration.client.ConfigAction.execute(ConfigAction.java:335)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.run(TaskPerformer.java:87)
at oracle.as.install.engine.modules.configuration.action.TaskPerformer.startConfigAction(TaskPerformer.java:104)
at oracle.as.install.engine.modules.configuration.action.ActionRequest.perform(ActionRequest.java:15)
at oracle.as.install.engine.modules.configuration.action.RequestQueue.perform(RequestQueue.java:63)
at oracle.as.install.engine.modules.configuration.standard.StandardConfigActionManager.start(StandardConfigActionManager.java:158)
at oracle.as.install.engine.modules.configuration.boot.ConfigurationExtension.kickstart(ConfigurationExtension.java:81)
at oracle.as.install.engine.modules.configuration.ConfigurationModule.run(ConfigurationModule.java:83)
at java.lang.Thread.run(Thread.java:619)
Caused by: oracle.as.provisioning.exception.ASProvWorkflowException: Error Executing workflow.
at oracle.as.provisioning.engine.WorkFlowExecutor._createDomain(WorkFlowExecutor.java:687)
at oracle.as.provisioning.engine.WorkFlowExecutor.executeWLSWorkFlow(WorkFlowExecutor.java:392)
at oracle.as.provisioning.engine.Config.executeConfigWorkflow_WLS(Config.java:866)
... 14 moreHi,
I found the issue, that is I have installed once and uninstalled it. but some of the components still not released. This is the route cause for this issue,
Solution:
Go to Run-> Services.msc -> search for the Weblogic related services.
If we found any such services running/disabled or in any state. we need to remove them.
To remove them go to run--> regedit --> HKEY_LOCAL_MACHINE --> SYSTEM--> CurrentControlSet-->Services
and then remove/delete the service..
Restart the system and try for fresh install....
Its resolved my issue.
Maybe you are looking for
-
Not able to get the class file PrintService
Hi, I am trying to use the following program to get the Printer name from my Registry.. this program has been taken from Forums. package yourpackage; import java.awt.Graphics; import java.awt.print.PageFormat; import java.awt.print.Printable; import
-
How do I pass a default parameter to a CR XI report in VB6?
Hi, How do I pass a default parameter to a CR XI report in VB6? For example I have a parameter list of years from 2000 to 2020 and I want to pass on the result of str(Year(Now)) so that the user automatically sees the current calendar year as his/her
-
Ich habe einen Panasonic Viera TX-L42D25E und möchte den gerne mit Apple TV 3. Generation verbinden. Leider wird Apple TV nicht vom Fernseher erkannt. Wer kann helfen?
-
My itunes will not register my ipod
I synced my ipod to my dads itunes acount to access photos from his computer. After i got the photos it was fine but now itunes wont register my ipod it doesnt even recognize it. When i look on my ipods wireless sync in the settings app it says it ca
-
Problem with updating to Photoshop CS5 12.0.4
Hello I have the problem that I cannot update to the newest Photoshop Patch. I tried everything mentioned in this discussion (http://forums.adobe.com/message/3699046?tstart=0) but with no success... What can I do else? I tried to contact Adobe Suppor