P67A-GD65 : Boot sequence keeps changing after installing SSD

Hi,
Before I had the SSD, all was fine and running on IDE. After installing SSD and changing mode to AHCI, the boot sequence keeps changing after reboot. I did not reset the CMOS after installing the SSD. I had disabled all boot except for the SSD (which is connected to SATA Port 1). And I did save by pressing F10 after changing the sequence in BIOS.
Appreciate your advise.
Thank you.

I have the same problem. The board decides to try and boot from some other device, even though the SSD is detected. Very annoying.
I'm using the sata cable that came with the board; e.g. brand new.
system:
P67A-GD53, bios 1.E, i5-2500K, 4x4 GB Corsair Vengeance, Corsair AX850W, OCZ Vertex LE

Similar Messages

Windows 7 / Arch Linux Dual-Boot - win7 keeps changing the boot flag!

Greetings!
Its been a long while since I had to dual-boot with windows on the same machine.
I 've installed windows 7 and then arch linux and installed GRUB on my sda1 where the /boot partitions is located at.
I've managed to boot into arch successfully and later into windows also successfully.... but when i tried to boot into arch again I wasn't greeted with the typical GRUB boot screen... grub was ignored completely and win7 booting began as if it was the only OS in my hard drive.
I've used the gparted live cd and realized that the boot flag has changed from my /boot partition (sda1) to my windows partition (sda2). I've changed it back and I was able to boot into arch again. but when I rebooted to win7 and then to arch the same thing has happened. The boot flag keeps changing whenever im rebooting into windows making impossible for me to boot with GRUB unles I manually change the flag again.
I haven't installed GRUB into the MBR because I hear it is a bad practice when you have a windows OS also installed (something with service packs not being able to install, among other things). I also don't want to use the easyBCD method to boot arch using the win7 loader.
here is the partition scheme on my 500gb sata drive :
/dev/sda1 /boot 250mb (primary)
/dev/sda2 windows 7 ntfs 100gb (primary)
/dev/sda3 swap 4gb (primary)
/dev/sda5 / 16gb (logical)
/dev/sda6 /var 8gb (logical)
/dev/sda7 /home the rest of the hd space (logical)
What am I doing wrong and how do i prevent the boot flag from changing?
Thanks in advance for any help you can give me!
Last edited by kamigr (2010-01-12 14:35:07)

naequs wrote:
bumping this because i have the EXACT same problem !
however i installed grub to sda1 because i didnt want my installs to mess with each other (not that ive had any problems with grub in mbr though...) .
this just looked cleaner to me.
if anyone has figured out how to prevent windows from automagically changing the bootgflag, id like to know !
but maybe this is a question more suitable for a windoze forum
tia
/edit: seriously, ive been searching the net for some time now, including irc chans and there seems to be no solution to this ! all threads similar to this just end dead !
i hate how windows claims to own my computer!
1. don't necrobump
2. as mentioned in the thread, just install grub to mbr and chainload windows. It works just fine and is the easiest way to get it working reliable.

My iPhoto keeps crashing after installing the latest update, can't do anything!

My iPhoto keeps crashing after installing the latest update, can't do anything! It used to crash when importing but now I'm at the point where I open the software and after 2 seconds it crashes (nothing connected either). What to do? Can't access any photos

Try this: launch iPhoto with the Option key held down and create a new, test library. Import some photos and check to see if the same problem persists. If you can create a new library and import some test photos then the problem lies with your original library.
If that's the case make a temporary, backup copy (if you don't already have a backup copy) of the library and apply the two fixes below in order as needed:
Fix #1
Launch iPhoto with the Command+Option keys held down and rebuild the library.
Select the options identified in the screenshot.
Fix #2
Using iPhoto Library Manager to Rebuild Your iPhoto Library
Download iPhoto Library Manager and launch.
Click on the Add Library button, navigate to your Home/Pictures folder and select your iPhoto Library folder.
Now that the library is listed in the left hand pane of iPLM, click on your library and go to the File ➙ Rebuild Library menu option
In the next window name the new library and select the location you want it to be placed.
Click on the Create button.
Note: This creates a new library based on the LIbraryData.xml file in the library and will recover Events, Albums, keywords, titles and comments but not books, calendars or slideshows. The original library will be left untouched for further attempts at fixing the problem or in case the rebuilt library is not satisfactory.
If iPhoto crashes while trying to create a new library then try this:
Make a temporary, backup copy (if you don't already have a backup copy) of the library and try the following:
1 - delete the iPhoto preference file, com.apple.iPhoto.plist, that resides in your
User/Home()/Library/ Preferences folder.
2 - delete iPhoto's cache file, Cache.db, that is located in your
User/Home()/Library/Caches/com.apple.iPhoto folder.
Click to view full size
3 - launch iPhoto and try again.
NOTE: If you're moved your library from its default location in your Home/Pictures folder you will have to point iPhoto to its new location when you next open iPhoto by holding down the Option key when launching iPhoto. You'll also have to reset the iPhoto's various preferences.
If that fails to help a reinstall of iPhoto is indicated. To do so you'll have to delete the current application and all files with "iPhoto" in the file name with either a .PKG or .BOM extension that reside in the HD/Library/Receipts folder and from the /var/db/receipts/ folder,
Click to view full size
Then install iPhoto from the disk it came on originally and apply all relavant updaters.
P.S. If you're still running Tiger, 10.4.6, then the above may not apply. If you're running a newer system you should update your profile so we have a better idea of where you're at.
OT

HP Pavilian m7050y & Monitor HP vs 19c keeps crashing after installing windows 7

Hi Forum Experts, hope all is well. Hopefully someone will be able to help me with this problem.
My HP Pavilian m7050y & Monitor HP vs 19c keeps crashing after installing windows 7.
I knew there was a problem when I first installed windows, because the windows logo was not centered on the monitor after intial startups. I did adjust it a little by pressing auto/select on my monitor, and that helped with the centering a bit but it is not perfectly centered.
The screen goes blue and this is the message I get when it crashes and restarts.
Problem has been detected and windows has been shut down to prevent damage
to your computer.
attempt to reset the display driver and recover from timeout failed.
if this is the first time you've seen this stop error screen,
restart your computer, if this screen appears again, follow
these steps:
Check to make sure any new hardware or software is properly installed.
If this is a new installation, ask your hardware or software manufacturer
for any windows updates you might need.
If problems continue, disable or remove any newly installed hardware
or software. Disable BIOS memory options such as caching or shadowing.
If you need to use safe mode to remove or disable components, restart
your computer, press F8 to select Advanced Startup Options, and then
select safe mode.
Technical Information
*** STOP: OX00000116 (0X85E75330, 0X9303C5BC, OX00000000, 0X00000002)
*** atikmdag.sys - Address 9303C5BC base at 9302C000, DateStamp 49f1996c
Collecting data for crash dump ...
Initializing disk for crash dump ...
Beginning dump of physical memory.
Dumping physical memory to disk:
the message is also slightly of to the left it really reads like this.
Problem has been detected and windows has been shut down to prevent damage
o your computer.
ttempt to reset the display driver and recover from timeout failed.
f this is the first time you've seen this stop error screen,
estart your computer, if this screen appears again, follow
hese steps:
heck to make sure any new hardware or software is properly installed.
f this is a new installation, ask your hardware or software manufacturer
or any windows updates you might need.
f problems continue, disable or remove any newly installed hardware
r software. Disable BIOS memory options such as caching or shadowing.
f you need to use safe mode to remove or disable components, restart
our computer, press F8 to select Advanced Startup Options, and then
elect safe mode.
echnical Information
** STOP: OX00000116 (0X85E75330, 0X9303C5BC, OX00000000, 0X00000002)
** atikmdag.sys - Address 9303C5BC base at 9302C000, DateStamp 49f1996c
ollecting data for crash dump ...
nitializing disk for crash dump ...
eginning dump of physical memory.
umping physical memory to disk:
Once windows is fully rebooted all pages, and the display look ok, until it crashes again. I searched for updated drivers on the HP and Windows site but could not find any. The one that is currently installed is called (Generic Pnp Monitor).
Thanks in advance for your expert advice.
Juan.

Thank you for the additional information.
Did you run the Win 7 Upgrade Advisor to assure that your computer is compatible? There may be a problem with compatibility. Also, which version of Win 7 are you running; 32-bit or 64-bit?
Signature:
HP TouchPad - 1.2 GHz; 1 GB memory; 32 GB storage; WebOS/CyanogenMod 11(Kit Kat)
HP 10 Plus; Android-Kit Kat; 1.0 GHz Allwinner A31 ARM Cortex A7 Quad Core Processor ; 2GB RAM Memory Long: 2 GB DDR3L SDRAM (1600MHz); 16GB disable eMMC 16GB v4.51
HP Omen; i7-4710QH; 8 GB memory; 256 GB San Disk SSD; Win 8.1
HP Photosmart 7520 AIO
++++++++++++++++++
**Click the Thumbs Up+ to say 'Thanks' and the 'Accept as Solution' if I have solved your problem.**
Intelligence is God given; Wisdom is the sum of our mistakes!
I am not an HP employee.

P67A-GD65 B3 boot priority keeps changing with USB device plugged in

I just bought this board this week and updated to the latest ( 1.D0 ) bios and still having these issues. First issue is that when in bios, my mouse only moves up and down. Can't move it sideways. I have to use my keyboard to adjust settings. I have Logitech USB keyboard and mouse. Second major issue is that I have 4 drives in a Raid setup and 1 1tb drive for storage. The Raid drives are hooked up to the Intel controller and the 1tb drive is hooked up to the Marvel controller. Everytime I turn the pc on and off or do a reboot the bios keeps changing the hard drive priorities to having the 1tb drive 1st even though I had the Raid drive as being first. One thing I notice is that if I unplug my USB card reader it boots fine and doesn't change the drive priority. It would be a hassle if I have to unplug my card reader each time and plug it in when I use. Kinda defeats the purpose of a front panel card reader. BTw the reason I had to plug my front panel card reader into a passthrough USB is because the board only had one 2.0 USB header and that was already being used by my 2 front panel USB connectors which was also disappointing.

Ok, all testing complete. Installed a USB 3.0 external, & a WD 2TB HDD to the Marvell. Settings, Intel AHCI, Hot Plug enabled. All USB functions enabled. Marvell set for AHCI. Booted to Windows normally. Marvell HDD showed up at POST, but in Windows had to be activated & assigned a drive letter. Full shutdown. At fresh startup, all was normal in the boot sequence with the Intel OS HDD as the #1 Boot Option, & the Marvell HDD was listed in the BBS as available to assign it's boot order. Continued to Windows & did another full shutdown. This time on a fresh restart, the Boot Option Priority was still #1 the OS HDD, but, the BBS boot order was the Marvell HDD listed as first & the Intel OS HDD as the #2. This didn't really cause any problem to boot normally even though the HDD BBS sequence was out of order. Full shutdown. At this restart, the Marvell 'was' #1 in the Boot Option Priority & the Intel OS HDD didn't show in the BBS list. I went ahead & let it boot into Windows which it did without a hitch & then I shutdown right away. At this point I took the USB external out of the picture, & it had no affect one way or another as to the boot order. Full shutdown/fresh startup, but this time, set Marvell to IDE, changed Intel Hot Plug to all disabled, save & exit, next cycle, Marvell was #1 Boot Option Priority again. Set the Intel as #1 Boot Option Priority & also as #1 in the BBS, & at every shutdown & restart since, the Intel OS HDD has held as #1. I went back & changed the Marvell back to AHCI later, & it still held correctly as to what I had set in each fresh startups.
Summary? I believe the Marvell devices are being initiated first in the POST sequence. Disable of Hot Plug seemed to help. Since the Marvell has no way to disable Hot Plug, the HDD always shows up in the Sys Tray. My advice? Unless you have multiple ODD's, I would suggest to disable & not use the Marvell ports or controller at all, or use it for ODD's only. How your card reader fits in to all this, I have no way to test for that. Place the storage HDD in one of the Intel SATA III ports, leave the 4 HDD's in Raid in the 4 black SATA II ports, place the ODD if only one in the other Intel SATA III port. Bottom line; MSI Tech Support needs to be notified & involved with this. By your description, there is an obvious conflict with the card reader & how all the boot order is established. Although I did have the Marvell take over the boot order a couple of times, it never caused the OS to not load as normal or cause any problems while in Windows. http://support.msi.com/

P67A-gd65 boot problem after BIOS update

I'm not optimistic about this, but...
My P67A-GD65 was delivered with BIOS 1.5. (However, the stickers on both chips read 1.4.) I updated the BIOS to 1.7 using a DOS formatted USB flash drive. (The EM was updated as well.) Things seemed to be running OK.
I foolishly experimented with the 1.8A beta BIOS. I flashed from DOS again. After rebooting, I went into the settings to reconfigure the machine as it had been. The EFI screen hung, so I powered the machine down (from the button, not the PSU).
I've been unable to boot since. No display appears on the monitor. If it is powered down, the power comes back on for an instant, goes off again, and comes up again with nothing on the display. The USB keyboard and mouse never become active, as far as I can tell. I tried a PS/2 keyboard; no difference.
If this board has dual BIOS indicator LEDs, neither illuminates, which indicates that all is serene.
I have cleared the CMOS several times, using the jumper or the button at the rear I/O panel.
Any advice? Is there any way to force the use of the second BIOS? (I've read the MSI dual BIOS FAQ posted elsewhere, but didn't spot anything of use.)
RMA time?

Quote from: ScunnyUK on 01-February-11, 16:08:59
Hi,
The blue screens started after a clean Bios flash to the 18b10 bios then eventually it stopped working complety (just doing the start up cycle over and over)
I had tried reseting cmos and it doesnt make a difference, the motherboard will not post , boot , start up at all so default settings cant be set (although reseting cmos would set to default anyway)
Each time the board goes through the start up cycle (i.e. upon pressing start button the board will start up with fans spinning for a second then shut down, start up again with fans spinning for a second then shut down, continuasly repeating until main power is removed) I have used a multimeter to measure the voltage read points on the board and they show that there is no vcore being suplied to the cpu but all other points show the voltage is being supplied to those componants, so imo that is where the problem lies and I would sugest that the other ppl who are having this issue to also try measuring the voltage read points and see if the same thing is happening on thier boards .
If others are getting the same results (no vcore) then the msi techs should be informed of this issue..(imo)
1.8b10 still is a beta bios. I got random bluescreens with that one also at some point a blinking bios led. So I flashed back from secondary bios (using the first option (change disable in enable)in "security" in the EFI shell to allow flashing from secondary bios), blinking bios led now stopped, Then I flashed with 1.7, no issues sofar cpu now running stable at 4.5Ghz (already 2 days).

Computer name keeps changing after Yosemite install

My iMac keeps getting into some sort of conflict with itself that causes it to rename itself.
It's normally "Pajundrum's iMac". A morning or two after installing Yosemite, I got a message on my iPhone that my Apple ID was being used on a new device, "Pajundrum's iMac (2)". I can go into the System Preferences->Sharing and reset the name, but if left it will keep incrementing itself.
If I'm using the computer when it happens, I get a message stating, "Another device on the network is using your computer’s IP address."
This is the only iMac on the network. It is only connected to the network one way (through WiFi).
I've tried reseting my router, but that didn't seem to affect anything. Does anyone know what could be causing this, or how to resolve it?

Regarding to this, there're two different solutions how-to fix this issue:
Go to System Preferences -> Energy Saver. Select "Power Adapter" and then uncheck "Wake for network access".
Go to Macintosh HD > Library > Preferences > SystemConfiguration and delete the following files:
com.apple.airport.preferences.plist
NetworkInterfaces.plist
preferences.plist
and reboot after. They'll be recreated correctly after that.

Computer keeps restarting after installing windows 8

Can you help my computer keeps restarting after I installed Windows 8? I have the minidump file zipped

We do need the actual DMP file as it contains the only record of the sequence of events leading up
to the crash, what drivers were loaded, and what was responsible.
You may be able to get the DMP files without crashing by booting into safe mode (F8) with networking.
If you are overclocking stop. (chances are if you dont know if you are, you are not)a
To enable us to assist you with your computer's BSOD symptoms, upload the contents of your "\Windows\Minidump" folder.
The procedure:
* Copy the contents of \Windows\Minidump to another (temporary) location somewhere on your machine.
* Zip up the copy.
* Attach the ZIP archive to your post using the "paperclip" (file attachments) button. (if available on your site, MS doesnt have this)
*Please upload them to a file sharing service like Skydrive or"Rapidshare" and put a link to them in your reply.
Link for how to upload below.
http://www.wikihow.com/Use-SkyDrive
To ensure minidumps are enabled:
* Go to Start, in the Search Box type: sysdm.cpl, press Enter.
* Under the Advanced tab, click on the Startup and Recovery Settings... button.
* Ensure that Automatically restart is unchecked.
* Under the Write Debugging Information header select Small memory dump (256 kB) in the dropdown box (the 256kb varies).
* Ensure that the Small Dump Directory is listed as %systemroot%\Minidump.
* OK your way out.
* Reboot if changes have been made.
Please also run MSinfo32 and upload the output as well.
To run MSinfo32 please go to start>run>MSinfo32
Go to "file" "save" and upload the saved file with the DMPS
(Instructions for XP, Vista, Win 7, Win 8)
System specs are often useful so include whatever you know
Dyami & Wanikiya ...Team ZigZag.

[P67a-GD65] [Ivy] Infinite reboot loop after flash

MSIHQ: Information detected by MSIHQ Tool ver: 1.25g
MSIHQ: Report generated in Tue 01/01/2013 at 13:31:41.33
Mainboard: P67A-GD65 (MS-7681) - CPU i5-3570K
PCB Version: 2.0
BIOS Version: V4.2
BIOS Date: 7/16/2012
Attempted to upgrade to https://forum-en.msi.com/index.php?topic=164135.0
Due to the inability to hold any overclocks with any voltage besides auto, and because the Windows MSI control center wouldn't keep settings on startup.
Installed the forum flash tool on a USB drive and it wasn't bootable.
Tried with another flash drive and it wasn't bootable.
Used the on-BIOS tool to flash the BIOS
Flashed, rebooted, and began reboot looping.
Cleared CMOS - nope
Removed battery and cleared CMOS - nope
Removed all but one stick of RAM - nope
Is it bricked? If so, how do I get a replacement/repair?
Edit, was perusing the forums and found this:
Forum flasher defaults to looking for zip files, if you pick rar from the drop down it should accept the file just fine, if you don't use method 1 you won't get the ME flashed.
It's lovely that that's documented and pointed out in the flashing tool's post, and it's rather odd that all of the BIOSes are saved in .rar archives if the flasher looks for .zip. I used method 2.

Quote from: Svet on 02-January-13, 04:35:53
You should use "Fix My USB key" Tool's option 1st before prepare the stick if you having troubles booting from the USB key.
I realized that after the fact.
have you done >>Clear CMOS Guide<< with power cord removed and leave 1 memory stick only in 1st DIMM close to CPU socket?
I just did that, and it unfortunately continues to loop.
I guess I'll get it packaged up and into the mail. Thanks for the help guys.
When I do get it fixed, what BIOS will it come with?

My iPhone 6+ keeps rebooting after installing iOS 8.3

I have a 128Gb iPhone 6+. When I downloaded and installed iOS 8.3 via WIFI, it went through the usual download sequence and then started continually rebooting. After about 20 or so reboots, I got a white screen with a carrier signal on the top left, a location icon and a grayed-out bluetooth icon and the battery level indicator on the top right, and a curious "information" icon (a letter "i" in a circle) at the bottom right of the screen.
I tried tapping on the "i" but got no response. Then the iPhone went into the reboot cycle again. After several reboot cycles, I got the same white screen again. Then the iPhone again started rebooting and hasn't stopped.
My iPhone 6+ has been problematic since I installed iOS 8.1.2. Several random reboots (about 4 cycles, before the iPhone returned to "normal") and some other issues that I didn't document.
I brought the iPhone to the nearest authorized Apple repair center. They said that they could not find any problem and neither could they duplicate the issue I experienced. They recommended that the next time reboots happened that I should make a video of the error. Also, they recommended that I keep all of the apps updated (which I conscientiously do). So I decided to make a log of all the errors since the iPhone was returned to me.
Here are the entries to my log:
iPhone 6+ Errors since March 30, 2015
218 apps not synced
Failure to Sync - 0xE800002D - The app was not installed on the iPhone because of an unknown error
iPhone self reboot during reinstallation of 218 apps not synced
Missing Google Authenticator settings.
AutoSMS app could not be reinstalled. Doesn't exist in App Store.
iPhone self reboot during phone call. Some apps reinstalling in background.
Could not download additional sound modules for Soundprism Pro. Still could not download modules after reinstalling app.
Noticed keyboard error when inputting Apple ID password. When pressing keys, instead of character pressed, a question mark appeared. Photo taken with another phone. Could not do a screenshot because iPhone screenshot would not work.
iPhone self reboot during text messaging. 9 apps updating (April 1, 2015, 11:30am)
Audible could not log in properly. Tried reinstalling app.
After manual reboot (cold reboot), screenshot functions works and no noticeable errors with keyboard.
Turned on full access for Fleksy , GIF and Symbols Keyboards. (April 1, 2015, 12:20 pm)
Noticed all 3rd party apps (Kindle, Audible, Dropbox, 1Password, YouTube) credentials need to be re inputted.
iPhone self reboot while testing GIF keyboard. Pasted an animated GIF on a test text message. Was able to paste GIF then phone rebooted. (April 1, 2015, 1:41pm) reboot took approximately 2mins.
GIF could not be pasted into Viber message. Also noticed screenshot function not working. (April 1, 2015, 1:53pm)
After cold reboot, screenshot function works. (April 1, 2015, 1:57pm).
iPhone self reboot while installing Ask Video9 apps. (April 2, 2014, 12:32am). Reboot time approximately 2mins.
Noticed standard keyboard error ("?s" when key is pressed) appeared. Also screenshot function not working.
After warm reboot (Home-Power key), all functions work. Reboot time approximately 1min.
iPhone self reboot while updating RoomScan Pro app and installing Via Crucis app. (April 2, 2015, 7:53am) Reboot time approximately 1min.
Screenshot function not working.
After warm reboot, screenshot function works. Reboot time approximately 2 mins.
iPhone self reboot while installing Way of the Cross app. (April 2, 2015, 8:03am) Reboot time approximately 1min.
Noticed a duplicate of this note appeared with time stamp 3mins apart from this note.
iPhone self reboot while typing update to this note (April 2, 2015, 8:07am) Reboot time approximately 1min.
Noticed that Way of the Cross app fully installed and 5 other apps updated. Looks like reboots happen after app updates or installations.
Noticed screenshot function not working.
iPhone self reboot while installing iMassExplained app. (April 2, 2015, 8:18am) Reboot time approximately 1min.
Noticed screenshot function working.
iPhone self reboot while installing Candy Tech app. (April 2, 2014, 1:00pm) Reboot time approximately 1min.
iPhone self reboot while installing Google Chrome app. (April 2, 2014, 2:42pm) Reboot time approximately 1min.
iPhone self reboot while playing music through a Bluetooth device. (April 2, 2015, 7:30pm) Reboot approximately 1min.
iPhone self reboot while scanning barcode for MyFitnessPal app. (April 3, 2014, 10:40pm) Reboot time approximately 1min.
Noticed Microsoft Word app not activating.
iPhone self reboot while checking App Store app. (April 3, 2015, 1:05am) Reboot time approximately 1min.
iPhone self reboot while using Microsoft Word app and Google Maps. (April 3, 2015, 1:15am) Reboot time approximately 1min.
Noticed "?s" when typing password for Apple ID (April 3, 2015, 4:40pm) Reboot time approximately 2mins.
Noticed that Movie ads not working in Subway Surfers. Then checked screenshot function. Screenshot function not working. March 3, 2015, 7:42pm.
Manual reboot corrected screenshot function. Movie ads still not working for Subway Surfers.
iPhone self reboot while changing lock screen with wallpaper created by Homescreen app. Also Quest Keeper app was installing (April 4, 2015, 1:35am) Reboot time approximately 1min.
Screenshot function not working.
Manual reboot DID NOT correct screenshot function.
2nd manual reboot got screenshot function working. But Passcode entry screen had Home Screen wallpaper instead of Lock Screen wallpaper and screen taps would not register. Passcode entry only working when the screen was tapped and swiped up from the camera icon. When camera was activated from the non working Passcode Entry Screen, a new working screen appeared allowing Passcode entry and after the screen, the camera app was opened.
iPhone self reboot while downloading Bible Gateway app. (April 4, 2015, 1:55am) Reboot time approximately 1min. Screenshot function not working.
Manual reboot DID NOT correct screenshot function.
2nd manual reboot got screenshot function working.
iPhone self reboot while downloading trying to change Home Screen wallpaper. (April 4, 2015, 2:05am) Reboot time approximately 1min. Still could not change either Lock or Home screen wallpaper.
iPhone self reboot sharing/emailing document from iMports app. (April 4, 2015, 10:57am) Reboot time approximately 1min.
iPhone self reboot while installing Candle app. (April 4, 2015, 9:40pm) Reboot time approximately 1min.
iPhone self reboot while adding picture to phone contact. (April 6, 2015, 2:47pm) Reboot time approximately 1min.
iPhone self reboot. (April 6, 2015, 2:49pm) Reboot time approximately 1min.
iPhone self reboot TWICE. (April 6, 2015, 4:11pm) Reboot time approximately 1min each. Fuzel Collage app was updating.
iPhone self reboot while using App Store. (April 6, 2015, 4:15pm) Reboot time approximately 1min.
iPhone self reboot while using App Store. (April 6, 2015, 7:42pm) Reboot time approximately 1min.
iPhone self reboots TWICE successively while installing 7IHS 2015 2Q app. (April 7, 2015, 9:37am) Reboot time approximately 1min per reboot.
iPhone self reboot. (April 7, 2015, 6:25pm) Reboot time approximately 1min.
iPhone self reboot. (April 7, 2015, 7:00pm) Reboot time approximately 1min.
iPhone self Renoir while using Bieber app. (April 7, 2015, 7:37pm) Reboot time approximately 1min.
iPhone self reboot. (April 7, 2015, 9:14pm) Reboot time approximately 1min.
iPhone self reboot. (April 7, 2015, 10:45pm) Reboot time approximately 1min.
iPhone self reboot while copying message from Viber app to iMessage. (April 8, 2015, 12:39pm) Reboot time approximately 1min.
iPhone self reboot while playing music. (April 8, 2015, 2:34pm) Reboot time approximately 1min.
iPhone self reboot while playing music. (April 8, 2015, 2:37pm) Reboot time approximately 1min.
Music shuffles by itself from one album to another.
iPhone self reboot while playing music. (April 8, 2015, 2:57pm) Reboot time approximately 2min.
iPhone self reboot while installing How To Tie A Tie app. (April 10, 2015, 12:12am) Reboot time approximately 2min.
iPhone self reboot while downloading iOS 8.3 update and writing a text message. (April 10, 2015, 7:25am) Reboot time approximately 1min.
I hope the details can help you diagnose the issue.
Thank you for all your help.

Yeah my is the same. Ive had enough of it now...Its been a week of my phone crashing & apps crashing, camera crashing, call dropping out all the time. I've had enough. Apple have done nothing to help it. Ive an upgrade & myself & my partner are buying samsungs.
P.S I've downloaded both ios 8 & ios.8.2 straight from my PC.
I have done all of the above & phone is still unstable & crashes apps all the time. Right now as we speak whats app wont work.
Waited to long now...Apple are doing nothing to help anyone anymore. Company is going down the drain fast.

P67A-GD65 boot issue

P67A-GD65
Bios version 1.7
I have this board now a few weeks and can't solve a little problem.
When i boot most of the time the board boots fine but sometimes i get in the right corner the 'B4' post code.
At that time nothing happens. After a short while windows start loading.
From what i know is the 'B4' code usb hot plug.
So i plugged my mouse and keybaord into different usb 2.0 ports..same problem.
No other usb devices are attached at that time.
So..why most of the time a perfect boot and sometimes a code i don't understand ?
Thanks in advance.

Quote from: Bobbika on 23-February-11, 07:15:20
Did you try booting with a different keyboard or mouse or none of them at all? I have a Steelseries Xai mouse that makes the boot hang on code B4. It takes about a minute longer than usual. With a simple Logitech mouse it boots like it should.
I haven't tried another keyboard or mouse.
There is no pattern in the B4 code. Totally random.
It could happen twice or after 10 succesfull reboots

I can no longer boot up in osx after installing windows 7 with bootcamp

After installing windows 7 with boot camp I am no longer able to access my osx side, I do not receive an option when holding alt when turning on my MacBook

What options do you get? If you don't get any options then you may not be pressing and holding the option key long enough or you are pressing it too early or too late.

Mac Pro Mid 2010 keeps restarting after installing OSX Mavericks

Hello,
my Mac Pro Mid 2010 started quitting and restarting after installing the Mavericks OSX. I was thinking about wiping out the drive and reinstalling OS X Mountain Lion but thought I should see if anyone else is experiencing these issues before going that route.
It just intermittently restarts and it tries to restart multiple times before it will actually start up again. It's not issuing a crash report. It just quits out and restarts. It started doing this just at initial startup. It now will quit and restart at any given time and it will take multiple times attempting to start before it actually starts up. I've even had to shut it down because it would going through that startup sequence without starting. No perceivable pattern as to why this is occurring. No specific programs that it occurs in. The only thing I know for certain is that it started happening after installing Mavericks OSX – OSX Mountain Lion was fine. I also made sure to unistall Mountain Lion before installing Mavericks with those potential issues of trying to install one operating system over another. Any thoughts would be appreciated.
Specs for Mac Pro Mid 2010:
- 2 x 2.66 GHz 6-Core Intel Xeon
- 14 GB 1333 MHz DDR3 ECC
- ATI Radeon HD 5770 1024 MB
- OS X 10.9.2

Hello Linc,
I followed your instructions. I have information for the BOOT_TIME and for SYSTEM DIAGNOSTICS sections. I've included all within one post with heading separators between the two sections. I wasn't sure if you needed this posted as two separate posts or not. If this isn't correct, please let me know and I'll do again. Hopefully I didn't pull too much content for the BOOT_TIME section. I was trying to search for enough diverse content that would clearly represent what might be occurring. It was also challenging to choose content for the BOOT_TIME section though because there was no time-stamped content close to the time of BOOT_TIME time stamp. The last time I restarted my system was hours before I attempted your exercise. And, I haven't experienced "crashing" more than it just automatically restarts in the middle of things. I wonder if that's why there were no .crash reports? There was only a list of .panic reports so that's what I provided. Thanks for your help Linc.
STEP 1 - BOOT_TIME:
8/12/14 1:58:29.000 PM kernel[0]: Fixing incorrect zfree from zone kalloc.32 to zone kalloc.64
8/12/14 1:58:46.987 PM WindowServer[104]: Display 0x2b2840d1: Unit 1; ColorProfile { 3, "DELL 2408WFP"}; TransferFormula (1.000000, 1.000000, 1.000000)
8/12/14 1:58:54.698 PM DMProxy[194]: CGSServiceForDisplayNumber: Invalid display 0x2b2840d0
8/12/14 2:00:51.000 PM kernel[0]: Fixing incorrect zfree from zone kalloc.32 to zone kalloc.64
8/12/14 2:00:51.000 PM kernel[0]: *** kernel exceeded 500 log message per second limit - remaining messages this second discarded ***
8/12/14 2:01:04.666 PM WindowServer[120]: Display 0x2b2840d1: Unit 1; ColorProfile { 3, "DELL 2408WFP"}; TransferFormula (1.000000, 1.000000, 1.000000)
8/12/14 2:01:12.000 PM kernel[0]: CODE SIGNING: cs_invalid_page(0x1000): p=254[GoogleSoftwareUp] final status 0x0, allowing (remove VALID) page
8/12/14 2:01:13.811 PM WiFiKeychainProxy[237]: [NO client logger] <Nov 10 2013 18:30:13> WIFICLOUDSYNC WiFiCloudSyncEngineRegisterCallbacks: WiFiCloudSyncEngineCallbacks version - 0, bundle id - com.apple.wifi.WiFiKeychainProxy
8/12/14 2:01:20.859 PM NotificationCenter[243]: Failed to mmap file. The file has zero length.
8/12/14 2:01:23.997 PM com.apple.audio.DriverHelper[279]: The plug-in named BluetoothAudioPlugIn.driver requires extending the sandbox for the mach service named com.apple.bluetoothaudiod.
8/12/14 2:01:27.000 PM kernel[0]: Fixing incorrect zfree from zone kalloc.32 to zone kalloc.64
8/12/14 2:15:33.763 PM quicklookd[2724]: Warning: Cache image returned by the server has size range covering all valid image sizes. Binding: VariantBinding [0x203] flags: 0x8 binding: FileInfoBinding [0x103] - extension: mp4, UTI: public.mpeg-4, fileType: ???? request size:16 scale: 1
8/12/14 2:15:39.000 PM kernel[0]: Sandbox: coreaudiod(264) deny file-read-metadata /Library/Audio/Plug-Ins/Components/UVIWorkstationAU.component
8/12/14 2:42:17.839 PM QuickLookUIHelper[2874]: *** Throwing exception err=-536870174 type=3 PlugInDevice.cpp line 81
8/12/14 2:42:17.851 PM sandboxd[145]: ([2874]) QuickLookUIHelpe(2874) deny iokit-open com_motu_driver_PCIAudio_UC
8/12/14 2:53:26.000 PM kernel[0]: firefox (map: 0xffffff803dc844b0) triggered DYLD shared region unnest for map: 0xffffff803dc844b0, region 0x7fff91200000->0x7fff91400000. While not abnormal for debuggers, this increases system memory footprint until the target exits.
8/12/14 2:55:19.376 PM plugin-container[2917]: Just logged in, send prefs down to 0 drivers
8/12/14 2:55:19.376 PM plugin-container[2917]: Adding ConsoleUID 501 to dictionary
8/12/14 2:55:21.182 PM plugin-container[2917]: CoreText performance note: Client called CTFontCreateWithName() using name "Myriad Pro" and got font with PostScript name "MyriadPro-Regular". For best performance, only use PostScript names when calling this API.
8/12/14 2:55:32.503 PM com.apple.launchd.peruser.501[200]: (com.apple.PackageKit.InstallStatus) Throttling respawn: Will start in 10 seconds
8/12/14 2:55:32.960 PM plugin-container[2917]: PlugInDevice::~PlugInDevice
8/12/14 2:55:33.790 PM WindowServer[120]: CGXGetConnectionProperty: Invalid connection 63027
8/12/14 2:55:33.807 PM com.apple.launchd[1]: (com.apple.MailServiceAgent[2714]) Exited: Killed: 9
8/12/14 2:55:33.812 PM loginwindow[80]: ERROR | -[Application setAppContext:] | Unable to get PID for context [0,118813]
8/12/14 2:55:33.814 PM com.apple.launchd[1]: (com.apple.ShareKitHelper[282]) Exited: Killed: 9
8/12/14 2:55:33.816 PM com.apple.launchd.peruser.501[200]: ([0x0-0x27027].com.apple.AppleSpell[2673]) Exited: Killed: 9
8/12/14 2:55:33.886 PM Core Sync[373]: NSDistantObject (0x1088026a0) is invalid (no connection)
8/12/14 2:55:34.305 PM sessionlogoutd[2929]: sessionlogoutd Launched
8/12/14 2:55:34.314 PM sessionlogoutd[2929]: DEAD_PROCESS: 80 console
8/12/14 2:55:34.335 PM fseventsd[86]: Events arrived for /Volumes/Mac OS X Install ESD after an unmount request! Re-initializing.
8/12/14 2:55:34.335 PM fseventsd[86]: creating a dls for /Volumes/Mac OS X Install ESD but it already has one...
8/12/14 2:55:34.612 PM shutdown[2930]: halt by _coreaudiod:
8/12/14 2:55:34.000 PM kernel[0]: Kext loading now disabled.
8/12/14 2:55:34.000 PM kernel[0]: Kext unloading now disabled.
8/12/14 2:55:34.000 PM kernel[0]: Kext autounloading now disabled.
8/12/14 2:55:34.000 PM kernel[0]: Kernel requests now disabled.
8/12/14 2:55:34.612 PM shutdown[2930]: SHUTDOWN_TIME: 1407880534 611700
8/12/14 2:55:34.625 PM Creative Cloud[252]: XPC error messaging com.apple.IconServicesAgent: Connection invalid
8/12/14 7:30:33.000 PM bootlog[0]: BOOT_TIME 1407897033 0
STEP 2 - SYSTEM DIAGNOSTIC REPORT:
Tue Aug 12 19:30:48 2014
panic(cpu 0 caller 0xffffff801f8dc24e): Kernel trap at 0xffffff801fc51e48, type 14=page fault, registers:
CR0: 0x000000008001003b, CR2: 0xffffff803f930ec0, CR3: 0x0000000022630000, CR4: 0x00000000000206e0
RAX: 0xffffff803ebc9f80, RBX: 0x0000000000000070, RCX: 0xffffff801ff034d0, RDX: 0xffffff803f915588
RSP: 0xffffff81c98d3c10, RBP: 0xffffff81c98d3c40, RSI: 0x0000000000010002, RDI: 0x0000000000000001
R8: 0x0000000000000000, R9: 0x0000000000000039, R10: 0xffffff801ff03770, R11: 0x0000007e3672c41b
R12: 0xffffff801ff034d0, R13: 0xffffff803f8dc2c0, R14: 0xffffff803f915580, R15: 0xffffff803f930ec0
RFL: 0x0000000000010286, RIP: 0xffffff801fc51e48, CS: 0x0000000000000008, SS: 0x0000000000000010
Fault CR2: 0xffffff803f930ec0, Error code: 0x0000000000000000, Fault CPU: 0x0
Backtrace (CPU 0), Frame : Return Address
0xffffff81c98d38a0 : 0xffffff801f822f79
0xffffff81c98d3920 : 0xffffff801f8dc24e
0xffffff81c98d3af0 : 0xffffff801f8f3746
0xffffff81c98d3b10 : 0xffffff801fc51e48
0xffffff81c98d3c40 : 0xffffff801fc8bffe
0xffffff81c98d3c80 : 0xffffff801fc8c1fd
0xffffff81c98d3cb0 : 0xffffff7fa01e49aa
0xffffff81c98d3ce0 : 0xffffff7fa01e48dc
0xffffff81c98d3d10 : 0xffffff7fa0144068
0xffffff81c98d3d70 : 0xffffff7fa0142c85
0xffffff81c98d3da0 : 0xffffff7fa0141646
0xffffff81c98d3dd0 : 0xffffff7fa01bfc43
0xffffff81c98d3e20 : 0xffffff7fa0140b8b
0xffffff81c98d3e50 : 0xffffff801fc956ef
0xffffff81c98d3ea0 : 0xffffff801fc952af
0xffffff81c98d3f30 : 0xffffff801fc90e89
0xffffff81c98d3f70 : 0xffffff801fc95e03
0xffffff81c98d3fb0 : 0xffffff801f8d7417
      Kernel Extensions in backtrace:
         com.apple.iokit.IOAudioFamily(1.9.7f2)[092DA230-DD20-3369-A32B-E162A496C638]@0x ffffff7fa013d000->0xffffff7fa016bfff
            dependency: com.apple.kext.OSvKernDSPLib(1.14)[7C60EDB3-7527-3412-B424-C9A667A65B92]@0xffff ff7fa012b000
         com.motu.driver.PCIAudio(1.6)[00000000-0000-0000-0000-000000000000]@0xffffff7fa 01be000->0xffffff7fa0223fff
            dependency: com.apple.iokit.IOAudioFamily(1.9.7fc2)[092DA230-DD20-3369-A32B-E162A496C638]@0 xffffff7fa013d000
            dependency: com.apple.iokit.IOPCIFamily(2.9)[4662B11D-2ECA-315D-875C-618C97CDAB2A]@0xffffff 7f9febe000
BSD process name corresponding to current thread: kernel_task
Mac OS version:
13E28
Kernel version:
Darwin Kernel Version 13.3.0: Tue Jun 3 21:27:35 PDT 2014; root:xnu-2422.110.17~1/RELEASE_X86_64
Kernel UUID: BBFADD17-672B-35A2-9B7F-E4B12213E4B8
Kernel slide:     0x000000001f600000
Kernel text base: 0xffffff801f800000
System model name: MacPro5,1 (Mac-F221BEC8)
System uptime in nanoseconds: 26153387208
last loaded kext at 18269508545: com.apple.driver.AppleMikeyHIDDriver    124 (addr 0xffffff7fa10fa000, size 20480)
loaded kexts:
com.Cycling74.driver.Soundflower    1.5.1
com.motu.driver.PCIAudio    1.6 58373
com.apple.driver.AppleMikeyHIDDriver    124
com.apple.driver.AppleMikeyDriver    2.6.3f4
com.apple.driver.AppleHDAHardwareConfigDriver    2.6.3f4
com.apple.driver.AppleHDA    2.6.3f4
com.apple.driver.AudioAUUC    1.60
com.apple.driver.AppleUpstreamUserClient    3.5.13
com.apple.driver.AppleMCCSControl    1.2.5
com.apple.kext.AMDFramebuffer    1.2.4
com.apple.iokit.IOUserEthernet    1.0.0d1
com.apple.iokit.IOBluetoothUSBDFU    4.2.6f1
com.apple.AMDRadeonX3000    1.2.4
com.apple.Dont_Steal_Mac_OS_X    7.0.0
com.apple.iokit.BroadcomBluetoothHostControllerUSBTransport    4.2.6f1
com.apple.driver.AppleHWAccess    1
com.apple.driver.AppleLPC    1.7.0
com.apple.kext.AMD5000Controller    1.2.4
com.apple.driver.AppleIntelMCEReporter    104
com.apple.driver.ACPI_SMC_PlatformPlugin    1.0.0
com.apple.driver.XsanFilter    404
com.apple.iokit.IOAHCIBlockStorage    2.6.0
com.apple.iokit.SCSITaskUserClient    3.6.6
com.apple.driver.AppleFileSystemDriver    3.0.1
com.apple.AppleFSCompression.AppleFSCompressionTypeDataless    1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeLZVN    1.0.0d1
com.apple.AppleFSCompression.AppleFSCompressionTypeZlib    1.0.0d1
com.apple.BootCache    35
com.apple.driver.AppleUSBHub    683.4.0
com.apple.driver.AppleFWOHCI    5.0.2
com.apple.driver.Intel82574L    2.6.2b1
com.apple.driver.AirPort.Brcm4331    700.20.22
com.apple.driver.AppleAHCIPort    3.0.5
com.apple.driver.AppleUSBEHCI    660.4.0
com.apple.driver.AppleUSBUHCI    656.4.1
com.apple.driver.AppleRTC    2.0
com.apple.driver.AppleHPET    1.8
com.apple.driver.AppleACPIButtons    2.0
com.apple.driver.AppleSMBIOS    2.1
com.apple.driver.AppleACPIEC    2.0
com.apple.driver.AppleAPIC    1.7
com.apple.driver.AppleIntelCPUPowerManagementClient    217.92.1
com.apple.nke.applicationfirewall    153
com.apple.security.quarantine    3
com.apple.driver.AppleIntelCPUPowerManagement    217.92.1
com.apple.driver.DspFuncLib    2.6.3f4
com.apple.vecLib.kext    1.0.0
com.apple.iokit.IOSurface    91.1
com.apple.iokit.IONDRVSupport    2.4.1
com.apple.iokit.IOBluetoothFamily    4.2.6f1
com.apple.iokit.IOAcceleratorFamily    98.22
com.apple.driver.AppleSMBusController    1.0.12d1
com.apple.iokit.IOBluetoothHostControllerUSBTransport    4.2.6f1
com.apple.driver.AppleHDAController    2.6.3f4
com.apple.iokit.IOHDAFamily    2.6.3f4
com.apple.iokit.IOFireWireIP    2.2.6
com.apple.driver.AppleSMBusPCI    1.0.12d1
com.apple.iokit.IOAudioFamily    1.9.7fc2
com.apple.kext.OSvKernDSPLib    1.14
com.apple.kext.AMDSupport    1.2.4
com.apple.AppleGraphicsDeviceControl    3.6.22
com.apple.iokit.IOGraphicsFamily    2.4.1
com.apple.driver.AppleSMC    3.1.8
com.apple.driver.IOPlatformPluginLegacy    1.0.0
com.apple.driver.IOPlatformPluginFamily    5.7.1d6
com.apple.driver.AppleUSBHIDKeyboard    170.15
com.apple.driver.AppleHIDKeyboard    170.15
com.apple.iokit.IOUSBHIDDriver    660.4.0
com.apple.iokit.IOSCSIBlockCommandsDevice    3.6.6
com.apple.iokit.IOUSBMassStorageClass    3.6.0
com.apple.driver.AppleUSBMergeNub    650.4.0
com.apple.driver.AppleUSBComposite    656.4.1
com.apple.iokit.IOSCSIMultimediaCommandsDevice    3.6.6
com.apple.iokit.IOBDStorageFamily    1.7
com.apple.iokit.IODVDStorageFamily    1.7.1
com.apple.iokit.IOCDStorageFamily    1.7.1
com.apple.iokit.IOAHCISerialATAPI    2.6.1
com.apple.iokit.IOSCSIArchitectureModelFamily    3.6.6
com.apple.iokit.IOFireWireFamily    4.5.5
com.apple.iokit.IOUSBUserClient    660.4.2
com.apple.iokit.IO80211Family    640.36
com.apple.iokit.IONetworkingFamily    3.2
com.apple.iokit.IOAHCIFamily    2.6.5
com.apple.iokit.IOUSBFamily    683.4.0
com.apple.driver.AppleEFINVRAM    2.0
com.apple.driver.AppleEFIRuntime    2.0
com.apple.iokit.IOHIDFamily    2.0.0
com.apple.iokit.IOSMBusFamily    1.1
com.apple.security.sandbox    278.11.1
com.apple.kext.AppleMatch    1.0.0d1
com.apple.security.TMSafetyNet    7
com.apple.driver.AppleKeyStore    2
com.apple.driver.DiskImages    371.1
com.apple.iokit.IOStorageFamily    1.9
com.apple.iokit.IOReportFamily    23
com.apple.driver.AppleFDEKeyStore    28.30
com.apple.driver.AppleACPIPlatform    2.0
com.apple.iokit.IOPCIFamily    2.9
com.apple.iokit.IOACPIFamily    1.4
com.apple.kec.corecrypto    1.0
com.apple.kec.pthread    1

Nokia 603 keeps restarting after installing FP1 Up...

hey i just installed FP1 update using nokia suite, everything went smooth but my phone isnt getting up just booting again and again after intervals, please help fast

after a lot of research finally updated to fp1 successfully .update is not available here via nokia suite.
after tagging this post i downloaded the update again and faced the same problem as i said. i removed the sim card and memory card. then i switched the power button and surprisingly my phone started to take update !!!!!!!!!!!!!!!!!!!!!!!!!!!!
i dont know how, but it took update. enjoying it. this is just more than ossum and apps are working perfectly except x-plore.

Can the P67A-GD65 boot without a graphic card?

Hi,
I just bought a P67A-GD65 with a Core i7 2600k and I want to operate the board without a
graphic card (as a server running Linux). To my surprise, the machine does not boot
with I remove the graphic card. I know it does not boot because I do not hear any
noise coming from the hard drive, nor do I see any SATA LED blinking. When I plug
in my ATI card, all is well.
I looked around in the UEFI BIOS and could not find any option to turn on/off.
The board is running FW 1.40.
Is this a known limitation?

Quote
No ? There is absolutly no way to get the card to boot and without a grafic card ? That is pretty bad isnt it ? :(
The mainboard was never intended to be used as a server as the OP had inquired about. With newer chipsets that have on-board graphics in the CPU, then it might be easy to configure. Not sure about this, but it may be possible to put a fake card or device in to trick it thinking it has a graphics card, but I have no information about it.
As per the forum rules;
Don’t…
- Hijack other peoples’ topics or resurrect old topics. A topic is considered old when its last update is 14 days old.

P67A-GD65 : Boot sequence keeps changing after installing SSD

Similar Messages

Maybe you are looking for