Package in business object

Please ignore this post.i have put it in Business object section
Regards,
anirban

This forum is dedicated to Busines Objects, a BI company recently acquired by SAP. Please re-post your message in the ABAP forum.
Cheers,
Fritz

Similar Messages

Package for Business Objects Explorer

Hello,
can anyone say what the "name" of the package is that we have to order to get access to ASP Business Objects Explorer software?
We want to use the non accelerated version of Explorer first.
I am asking here to speed up the process - I want to give the information to our account manager.
Thanks in advance,
André

It is sold as an add-on. I don't believe there is a 'package' name specifically. Package names are usually used for the SAP ABAP or JAVA based products. But the product name you're looking for is listed on Service MarketPlace as "SBOP Explorer XI 3.2". The Application Group name is: "SAP BusinessObjects Portfolio"

How to select the business object in ESR and the packages used in SAP 7.1

Hi
I am trying to use the Service interfaces of ESR available in ESA ECC-SE 604 and a few in SAP APPL 6.04.
How can we choose the GDT,Business objects or Service interfaces for the requirments?
Can we know which package provides which objects like what are the available things in ESA ECC-SE 604 and when should PI or ECC use it.
I am trying to create functional location Service interface(Installation Point ) and Equipment (Indivisual Material) for untillities requirment.
Thanks in Advance

Hi,
For choosing the GDT, Business objects or Service interfaces for the requirements you first need to create dependencies between the components. For that read the "Defining Dependencies Between SWCV and EnSWCV in SLD" topic from the following link
[https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/c0bb5687-00b2-2a10-ed8f-c9af69942e5d]
SAP has published all Services that support SAP Business Suite functionality on the Enterprise Services Workplace in the SAP Developer Network (SDN). You can refer that for getting the information of different services and their objects.
Regards,
Jitender

Package in ABAP Business Object

Hi,
whenever we create a ABAP business object, we assign it to any package even if it is used in our local system.
Will anybody please tell me the reason?
Regards,
anirban

This forum is dedicated to Busines Objects, a BI company recently acquired by SAP. Please re-post your message in the ABAP forum.
Cheers,
Fritz

Problem Installing Business Objects XI 3.1 SP2 on AIX 5.3

Hi,
We installed Business Objects XI 3.1 first on AIX 5.3 and everything worked fine.
Once we apply BO XI 3.1 SP2 patch (by running the install.sh script from the
BO XI 3.1 SP2 install bits) onto the Business Objects XI 3.1instance, the following error
[error] Errcode 1: gzip -dc "/apps/truecomp/boXI31-temp/xi31_sp2/pkg/jdk00000.tar.gz" | /bin/tar xvfb - 1
during the installation ( when we checked, the package "jdk00000.tar.gz" contained mostly some libraries
that are already existing under the installed java/bin directory, the error is likely due to tar command can't
overwrite the existing files there), and it seems that the library files in "jdk00000.tar.gz" package are same as
the existing files under java/bin directory. So this error may not matter (just our guess).
The real problem for us after installing BO XI 3.1 SP2 is that, the tomcat log (file name "catalina.out") throws
the following exception and tomcat can't start up, so we can't log onto CMC anymore. Anyone know if this is
a known issue or any solution or workaround? The frustrating thing is that, SP2 can't be uninstalled (
it likely thinks SP2 was not installed successfully), and this whole BO XI 3.1 instance is not usable anymore,
we have to remove the whole thing altogether (no way to remove just SP2 part).
=============Tomcat error log from ""catalina.out" after installing BO XI 3.1 SP2============
New org.apache.struts.action.ActionMapping
10-07-10 17:28:19:306 - session.ManagerBase Thread [main]; IOException while saving persisted sessions: java.io.FileNotFound
Exception: /apps/truecomp/BOXI31/bobje/tomcat/work/Catalina/localhost/BusinessProcessBI/SESSIONS.ser (A file or directory in the path name does not exist.)
java.io.FileNotFoundException: /apps/truecomp/BOXI31/bobje/tomcat/work/Catalina/localhost/BusinessProcessBI/SESSIONS.ser (A file or directory in the path name does not exist.)
        at java.io.FileOutputStream.<init>(FileOutputStream.java:205)
        at java.io.FileOutputStream.<init>(FileOutputStream.java:96)
        at org.apache.catalina.session.StandardManager.doUnload(StandardManager.java:488)
        at org.apache.catalina.session.StandardManager.unload(StandardManager.java:462)
        at org.apache.catalina.session.StandardManager.stop(StandardManager.java:666)
        at org.apache.catalina.core.StandardContext.stop(StandardContext.java:4358)
        at org.apache.catalina.core.ContainerBase.removeChild(ContainerBase.java:892)
        at org.apache.catalina.startup.HostConfig.undeployApps(HostConfig.java:1164)
        at org.apache.catalina.startup.HostConfig.stop(HostConfig.java:1135)
        at org.apache.catalina.startup.HostConfig.lifecycleEvent(HostConfig.java:312)
        at org.apache.catalina.util.LifecycleSupport.fireLifecycleEvent(LifecycleSupport.java:119)
        at org.apache.catalina.core.ContainerBase.stop(ContainerBase.java:1054)
        at org.apache.catalina.core.ContainerBase.stop(ContainerBase.java:1066)
        at org.apache.catalina.core.StandardEngine.stop(StandardEngine.java:447)
        at org.apache.catalina.core.StandardService.stop(StandardService.java:512)
        at org.apache.catalina.core.StandardServer.stop(StandardServer.java:743)
        at org.apache.catalina.startup.Catalina.stop(Catalina.java:601)
        at org.apache.catalina.startup.Catalina.start(Catalina.java:576)
        at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:79)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:43)
        at java.lang.reflect.Method.invoke(Method.java:618)
        at org.apache.catalina.startup.Bootstrap.start(Bootstrap.java:294)
        at org.apache.catalina.startup.Bootstrap.main(Bootstrap.java:432)
10-07-10 17:28:19:311 - session.ManagerBase Thread [main]; Exception unloading sessions to persistent storage
java.io.FileNotFoundException: /apps/truecomp/BOXI31/bobje/tomcat/work/Catalina/localhost/BusinessProcessBI/SESSIONS.ser (A file or d
irectory in the path name does not exist.)
=============================

Just want to add to the original question that:
the directory (in the error stack from tomcat)
/apps/truecomp/BOXI31/bobje/tomcat/work/Catalina/localhost is NOT even existing on the
AIX server which installed BO XI 3.1 SP2.
Would really appreciate any comments on this problem, especially from SAP support team.
We are really stuck here.
Thanks.

Read Before Posting - Where to find Business Objects Java SDK Resources

Before posting you should look through the various resources below for the answers to your questions. A lot of the "how to" or "where can I find" questions are already answered in the material below.
Search the Forums
Use the search feature in these forums to see if your question has already been answered.
SDK Libraries
[BI 4.0|http://www.sdn.sap.com/irj/boc/sdklibrary]
[BusinessObjects Enterprise XI 3.0|http://www.sdn.sap.com/irj/boc/sdklibrary?rid=/webcontent/uuid/90db428d-71ba-2e10-7eb7-d3286eec5ac0]
[BusinessObjects Enterprise XI Release 2|http://devlibrary.businessobjects.com/BusinessObjectsXIR2SP2/en/devsuite.htm]
[BusinessObjects Enterprise XI Release 1|http://devlibrary.businessobjects.com/BusinessObjectsXI/en/devlib.htm]
Crystal Enterprise 10, Not available online.
[Online Viewable JavaDocs|http://help.sap.com/javadocs/index.htm#sapbobj]
SAP Notes
(Formerly known as the Business Objects Knowledge Base)
This is a good location to find known issues, look up error messages, and general tips and tricks with the BusinessObjects Enterprise product line.
[https://service.sap.com/notes] (this requires logon to the SAP Service Marketplace).
Crystal Reports Server, Crystal Reports and Xcelsius SAP Notes are accessible here:
[https://www.sdn.sap.com/irj/sdn/businessobjects-notes]
Sample Code Search
[BusinessObjects Enterprise SDK|https://wiki.sdn.sap.com/wiki/x/HQBmBQ]
[RAS SDK|https://wiki.sdn.sap.com/wiki/x/HgBmBQ]
[Web Services SDK|https://wiki.sdn.sap.com/wiki/x/HwBmBQ]
[Report Engine SDK|https://wiki.sdn.sap.com/wiki/x/IABmBQ]
[Crystal Reports Java SDK|https://wiki.sdn.sap.com/wiki/x/JgBmBQ]
[Java Reporting Component SDK|https://wiki.sdn.sap.com/wiki/x/JwBmBQ]
Business Objects Downloads
- Service Packs and Fix Packs
- Merge Modules and Installation Packages
- Sample Reports and Databases
[http://service.sap.com/bosap-downloads] (requires logon to SAP Service Marketplace).
Crystal Report For Eclipse
[WIKI|https://www.sdn.sap.com/irj/boc/crystalreports-java]
[Product Portal|https://www.sdn.sap.com/irj/boc/crystalreports-java]
Crystal Reports Server, Crystal Reports, and Xcelsius Downloads
[https://www.sdn.sap.com/irj/sdn/businessobjects-downloads]
Business Objects Articles
[https://www.sdn.sap.com/irj/sdn/businessobjects-articles]
Edited by: Aasavari Bhave on Oct 25, 2011 8:49 AM

Thanks. That was useful.
-Rajini

Going from Crystal XI to Crystal 2008 (Business Objects Edge).

Hi. I currently use Crystal XI use BusinessObjects Enterprise XI Release 2 to schedule and run my (our) reports.
I rang the customer support line and they said my questions were best tried out here in the forums.
I currently have five licences for Crystal XI.
I am looking at looking at going over to Crystal 2008, which comes in the Business Objects Edge, standard package.
I had a few questions about doing this and I was hoping the community will be able to assist with.
1. If I go ahead with Crystal 2008 will it need to totally replace my Crystal XI set up? For example could I have some of my staff using XI, and other staff members using 2008, but be able to schedule (and save) the reports centrally from my existing Business Objects Enterprise server?
2. Or would it be simpler to roll out Crystal 2008, via the Business Objects Edge standard package, and migrate the reports from XI to 2008, and in doing so totally replace the use of Crystal XI altogether?
- Are there compatibility issues with migrating reports designed in XI into 2008?
- If so was the quickest solution to rebuild existing reports in 2008?
- Is it simple to do? (say as simple as re-opening the XI reports in 2008 and clicking save?
I appreciate any comments in advance.
Hab.

The 2nd option is the one officially supported by SAP.
Regarding the XI reports stored in the XI R2 repsoitory:
You should just install BO Edge 3.1 on a new server and migrate your XI R2 repository contents into the new installation. YOu can use the ImportWIzard for this.
Regarding local XI reports:
Local XI reports can be migrated by opening them using the CR Designer 2008 and just saving them back to the local filesystem.
BTW if you run into problems with a report which was migrate it as part of the XI R2 repository you can also try to open it from the Edge 3.1 repository using the CR 2008 Designer and save it back again.
Regards,
Stratos

Extract account Based COPA from R/3 using Business Object data services

Hello,
We have a requirement to extract Account Based COPA from SAP R/3 to Teradata using Business Objects data services.
I have read couple of white papers which give information on Rapid Marts( which are built in packages) already available for some applications like inventory, GL, AP, AR etc. But I could not find anything for COPA.
Would anyone give me any information on how to use BO data services for COPA?
Also if there is no rapid mart available for COPA, does anyone know how to create custom data marts in BO Data services?
Is there any document available on this?
Please respond as soon as possible.
Thanks.

Hi,
this forum is for the SAP Integration Kit. Would suggest you post your question into the EIM area for Data Services.
Ingo

Object Link to CRM business object in Trex search result list

Hello Everyone,
has anybody sucessfully configured the functionality "Object Link Properties" which is described in the Document <a href="http://service.sap.com/~form/sapnet?_SHORTKEY=01100035870000647974&_SCENARIO=01100035870000000112&_OBJECT=011000358700005796662005E">Configuring the Business Package for SAP CRM 5.0 SP01 (EN)</a> on Page 169? I'm not the Knowledge Management specialist and would get some help on this topic. Has anybody detailed steps how to configure this?
It shounds interresting as the result would be that when the User does a full text search for Attached Documents he will also get a link to the original CRM business object like Activity, Account or Opportunity.
Regards
Gregor

Hi Gregor,
Thanks for your reply.
using windows explorer mechanism i can see the folders that i created in the CRM config.
Now in Portals KM i did the following steps:
a) Created an HTTP Data Source : with URL = the URL that the service crm_prt_km_dav generates.
http://abrusux156h.pch.chem.corp.local:8086/sap/crm/crm_prt_km_dav
b)Created a memory cache
c)Created a WebDAV respository manager with the following details:
Description :WebDAV
Prefix : /PRD (PRD is the BO Hierarchy name that i have set in the CRM config)
System ID : T86 (Sames as what was set in HTTP Data Source)
Repository Service : svc_acl
ACL Manager cache : ca_cm
Security manager : ACLSecurityManager
Memory Cache :webDAV(same as what i had set in step b)
I restarted the portal server. and then tried doing the test by going to
Content Admin ->KM Content ->root
But i dont see the /PRD folder out there.
Any clues on that???
Thanks,
Anand

Unable to import Business Object in DQE

I've some prob with "importing business Objects" in SAP Enterprise Portal
I've EP6.0 SP16 installed.
While importing the Business Object from "BW" System
I expand the BW Node but alas! dont get any BO in it..
It shows a message "Loading...." and hangs..
I've read some of the discussion Forum on SDN...
I've given the DQE Admin UserID and Password correctly.
Also I've done the User Mapping for BW System and gave the same UserID and Password as given in DQE in the "Personalize" section
I've tested the "BW" Connection using the option "Connection Test".
It gives "DQE Connection Succeeded'.
Please let me know where i'm wrong..
Thanks..

First thing dear Actually you are using the wrong term it is not exactly import it is EXPORT the existing BC4J component in Jdev.
Just run the export command it will automatically create the package in the Home directory.
Create a new JWS and Project and add related PG or Region there.[[Which you have exported]]
Thanks
--Anil

Business Objects With ERP

Actually I need your advice for a requirement I have a customer that donu2019t want to implement BW at all but he is very interested in SAP Business Objects BI Tools This customer has a huge amount of data and the manager insisting not using BW or BWA So my only choice is to use only form BOBJ BI package: Xcelsius and Crystal Reports But I am also wanted to provide WebI and explorer but I know this impossible
I had read in SDN Articles that I can use Federator to connect to the ERP directly and so I can create a universe and so I can deliver Webi Document and Explorer
So I need your advice and your recommendations for this

Hi
currently you have the following options:
1. You can use SAP rapid marts. They contain Data integrator mappings (you need an installation of the DI for this) to extract and load your SAP R/3 data into a relational database. Additionally they provide universes (based on a relational schema) hich ill allo you to build WebI reports.
2. You can use the R/3 connector for the Data Federator (You need a DF installation for this). Please note that the R/3 connector is not yet a product rather just a PROTOTYPE. Take a look here: SAP BusinessObjects Web Intelligence Reporting for SAP ERP [original link is broken]
3. You can try to access the underlying database directly using the appropriate DB drivers. Please note that this is NOT RECOMMENDED. This way you cannot leverage security defined on the R/3 side in your WebI reports and you will not be able to access all data as available in R/3 since some of them are stored encoded/compressed in the underlying tables.
4. Instead of WebI you can use Crystal Reports and the R/3 drivers (eg. SAP Tables, Functions, Cluster) provided when installing the integration kit for SAP.
Regards,
Stratos

Business Objects / BODS Upgrade

Hi Guys.
We have an end to end Business Objects solution implemented in our environment consisting of BODS (XIR3), Business Objects (XIR3) and Crystal Reports (2008). We are planning to upgrade the BODS and Business Objects environments to the latest version but would first like just the BODS to be upgrade as the support for the application has now been ceased by SAP. I believe for the same we would require to use IPS as BOE will still be at the old version and in the latest version BOE and BODS have been integrated.
Please can you suggest any documentation which we can refer for such scenarios and will we be facing any problems once we upgrade BOE in future in integrating it with BODS as that will be dependent on IPS. Any information on the Pros and Cons on using this methodology will be very helpful.
Please let me know if in case any further details are required. Thanks in anticipation of your help.
Cheers,
Shazin

Hi
since there is no really an upgrade package from XI R2 to XI 3.x you have to do a new XI 3.x installaiton and copy afterwards your repository contents from the old to the new system. THis means that the old system is always available for your users. The migration process is officially supported and SAP should provide support for any related issues.
I would recommend to start on both sides with the most actual Service pack and fix pack version. For XI R2 this should be SP6 with FP 6.1 (note: you should have at least SP4 on XI R2 in order to do the migration) and for XI 3.1 this should be SP 2 with FP 2.6.
Regards,
Stratos

Business Objects Financial Consolidation - Excel Link and VBA Macros

Hi
We use the excel links of Business Objects Financial Consolidation V10.5 to import and export data to/from BOF and excel
We used VBA macros for the imports but do not know what VBA code is required to export - this code would include the package identifier that has to be selected in the window "Select item Package "
Can anyone help?

Hello Chrisitne,
I am as well intersted by the same funtiont, did you find any answer?
Can I also ask you the VBA code for Import and Export if you have it?
Thank for your help!

Business Objects In Portal Content Studio

Hi All,
I Installed a business package for CRM in EP 6.0 SP09 and I created aliases SAP_BW and SAP_CRM for the CRM and BW systems and assigned roles to users and was accessing them.
The Business Objects Folder in Portal content studio was empty even after the installation of BP, but Later when I checked that I found a Folder "SAP_BW" under "Business Objects" Folder. I just want to know how did these objects come there and how
Could someone please clarify this to me.
Thank you

Hi Ignacio,
Should they be transported manually to the QA system or will they again be created automatically when I start accessing these BW iviews in QA system.
will it save me the loading time of a template if I transport this business objects folder to QA system by creating a transport package.
Thank you
Shiva

Sharing of Business Objects in Weblogic 8.1

Hi,
I am using weblogic 8.1 for my application development. It contains a Webapplication module and 2 ejb's module and each module contains about 70 Ejb's. The problem is all the modules use some common business objects. Now the business objects need to be changed often and so that i could not give them in the classpath(it removes the hot deployment feature). If i place these business objects on the App-Inf/classes folder directory as well i am getting noclassdeffoundexception..
Kindly help me out
Thanks,
Rajkumar

Hi,
I have the classes packaged correctly under the App-inf folder. But still i get the same error
The domain structure is as follows
Myapplication
|->App-INF->classes->mypackage
|->expressWebApp
|->expressWebEJB
|->expressWebWebEJB
|->Meta-INF
The mypackage contains the exact folder structure like
com\bellatlantic\eo\service\user\User.class
Any idea why this error is comin out
Moreover i cannot give these classes on the classpath as it would remove the hot deployment feature.
right now we have give the classes on the classpath and we have to restart the server for every small change we make
Any help in this regard would be greatly appreciated
Thanks,
Rajkumar
Message was edited by rajkumarc_2000 at Oct 18, 2004 11:03 PM

Package in business object

Similar Messages

Maybe you are looking for