Page and Print Set-Up in P6.2

Can you save your page set-up (page size etc.) and print set-up (printer, including Adobe) with your layout save?

michigan mike wrote:
Can you save your page set-up (page size etc.) with your layout save?YES
.. and print set-up (printer, including Adobe) with your layout save?NO. not with the layout, but print driver default settings. more to do with the client machine OS.
try 1st and 2nd buttons in the "print preview" icon bar.
best of luck

Similar Messages

  • Spread image across two pages and print the full pages

    Hi there,
    Im having a bit of trouble with InDesign CS3.
    I want to place an image across two facing pages but can't seem to make it go further than one page.
    Also I want to figure out how to print full pages, currently I am only able to print what is contained in the pruple bounding box on the page, any part of the image outwith this is cropped off leaving a white border on the page - this isn't an issue for all but my title page and this two page image I require.
    Any tips.
    Cheers
    malc

    I don't understand the inability to place an image that spans two pages (not that I necessarily think this is a good thing to do under most circumstances, but that's a different discussion). Can you see both pages in the same spread? How about providing some details about what you are doing, and maybe a screen shot showing what's happening. Perhaps you're using a frame on the master page?
    The second part sounds like a printer issue, but that's hard to know without knowing what your "purple" guides (presumably the page margins) are set to. Most printers are not able to print to the edge of the sheet of paper, regardless of what might be included on the page, so you get a white border that will vary in size depending on the printer model. Generally speaking, to print a bleed you must extend the items beyond the page edge (to insure there is no white edge left fom misaligment in the cutter) and print on a larger sheet, then trim to finished size.

  • My printer will not detect the alignment page and prints out poorly?

    My printers scanner will not detect the alignment and prints our poorly? Help!

    Please read this post then provide some details.  What printer model? What operating system? Are black and color properly printing on the alignment page?
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • Enlarging page and print on screen

    Monitor: HP w2338h   Computer:  MiniMac Model #1283
    1.  How can I enlarge the print on the monitor?
    2.  How can I spread out the page on the monitor, especially horizontally?
    3.  What would be the best resolution to set the monitor?
    Thanks.

    The monitor's resolution is 1366 x 768 .  Normally the Mac OS will give choices and recommend the resolution but pick 1366 x 768  from the list.
    {---------- Please click the "Thumbs Up" to say thanks for helping.
    Please click "Accept As Solution" if my help has solved your problem. ----------}
    This is a user supported forum. I am a volunteer and I do not work for HP.

  • Layout pages and print css

    The problem i'm having, under the pages i'm seeing four of the layout files from my Web Apps that were created. They weren't there the other day and can't workout how to make them go away again, don't really want the client to see the layout pages or to accidentally delete them.
    Also how to i edit the print view? the client would like me to style the print view but not having much luck with the old way <link href="../../stylesheets/print.css" rel="stylesheet" type="text/css" media="print.css"/>

    Print view is gone in BC now since you would set that up with media queries in your CSS etc. Its not needed.
    In terms of those folders I think I mentioned to you in another thread - You need to contact BC support. You have somehow made a simialr folder name and caused BC to open view the folders and have web apps in that folder. BC will need to take a look at that and sort it our for you.

  • Excel with hyperlinks, multiple pages, and print titles

    I have two large excel files that have hyperlinks to the web. In standard page size, each will have multiple pages. Because it is continuous information, Print Titles are required at both the top rows and left columns. However, along with having to shut off Set Print Area, it seems I must also shut off Print Titles in order for Acrobat to maintain the links. The first problem isn't really a problem. Shutting off print titles, however, makes the document useless to readers. Does anyone have a workaround? The only thing that occurred to me is to manually split the pages (they could be linked to a master sheet so I still have a continuous master) and repeat the print title rows, but that seems like a lot of extra work since Excel isn't fond of linking large sections all at once.

    I resolved this myself after much experimentation.
    (1) Clear Print Area
    (2) Remove values from Print Titles.
    (3) Manually insert rows and columns that need to be repeated on each page. You can do this as links if you want to.
    (4) If your spreadsheet needs lines all around the borders, make sure you one have one empty row and column on all four sides. Without this, you may lose some of the bordering lines.
    (5) Hide ALL other unused rows and columns that you do not want to show. This effectively functions as a Set Print Area.
    (6) Make the PDF.
    (7) If necessary for further manipulation of the worksheet, hide the extra inserted rows and columns (Step 3) as you work with the worksheet and unhide them before publishing.

  • Understanding ColorSync and printing set-up

    I have spent two days hunting round the net for a simple understanding of how to set up my Konica Minolta Magicolor 5450 printer and my G5 Dual so they can work happily together to produce the outpt I need, specifically in relation to greys (currently coming out as various shades of pink!). I've had to digest a lot of high tech stuff and have a kind of overview on what the issues are. However, I really need much simpler terminology to help me trouble shoot. Is there a good, comprehensive but less scientific source that will explain how I can resolve the gamuts involved and get my greys to be grey not pink?

    The simple anwser is most people are not sure how to explain "color" because it's something a little different to each person and it is a complicated process.
    You're tweaking light.
    When your trying to get your printer to print grays from Cyan, Magenta, Yellow, and Black, you need to be able to recognize if your printing only black, or are the other colors involved. This is usually determined by your application and the printer driver being used.
    Gray balence is a very critical balence because any one of the 3 colors can sway the "gray balence".
    Too much Magenta is typical.
    You can adjust your monitor to look like what your printer will print is one way to start. Make your work look good on the monitor and it should print okay. Remember your monitor is showing you RGB and the printer is printing CMYK.
    This is not a good way to handle this.
    --OR--
    You can use the ICC profiles already made (or should come with your Konika printer) and use those in the applications' preferences to set up with. Remeber ICC's are color-space specific as in one for an RGB monitor and a CMYK one for the printing device.
    ICC profiles are used to control the intent for an output device to represent what the image will look like a printing press, or a proofing device, or a monitor, etc.
    You're trying to get 2 different things to match in 2 different color spaces.
    I've worked for printing companies over 20 years and this is not an "easy anwser" question because of all the variables.

  • How do you Spread an Image across multiple pages and print?

    I'm trying to create a large poster to be put on a bulletin board. I've mangaed to spread the image across multiple pages but I can't figure how to be able to print the pages have the edges line up successfully after cropping. I've been playing with the bleed settings but can't figure it out. Here a shot of what im working with:
    Im working in CS3 on Mac OS X

    Create your InDesign document at your final size and when you print it out put a check mark in the box for Tile

  • Default PLD and printing setting table

    Hi,
    In which table is the PLD setting is stored? (other than RDOC and RITM) For example like Setting default "Template A" for Sales Order (RDR10001) or like assigning specific PLD to specific BP.
    nd

    The tables are RDFL and RTYP. 
    RTYP table contains the default PLD template for each document
    RDFL table contains entries for user specific and BP specific documents.
    If you set a Document as default for specific BP then, the CardCode column in RDFL will have one entry for each BP you set as default for a particular PLD.
    Best wishes
    Suda

  • "Use condition indicators" and "Print setting" errors when updating FM book

    I recently updated the designs of some templates used in our FM books. I created a sample manual using the new templates to test it out. When updating the book, I get the following errors. I have fixed errors before, but I've never seen these ones.

    Hi priya,
    Not sure: check syntax in your Update Roules, also at level of start routine.
    Ciao.
    Riccardo.

  • New owner here.  How can I select specific pages of a document found on line and print just those pages.  What I see is the ability to select only 1 page at a time and print that one selected page only.   Thanks much.

    New owner here.  I see that in printing I can select one page and print same.  How do I select numerous pages from a document and print only those selected pages? I would not think that I can only select one page at a time.  Thanks much

    Just change the range as illustrated below.  If you don't see that, click the Show Details button.

  • Help needed in page setup and print dialouge

    Hi
    how can i display page setup diaog box and print dialog box in java to print my document.
    Thanking you in advance

    if you can tell the full procedure how can i setup the page and print my file it will be very kind of you.

  • Why does my Pages Brochure print all washed out?

    When I print my Pages Photo Brochure the colors are all washed out. I edit my photos in Adobe Photoshop Elements 10 and they print out with good color and resolution from PE10. Is there a color manager for Pages? I'm exporting my document as a PDF but even if I just drop a photo on a Pages blank page and print, its still washed out. The screen view looks great but print quality is bad. Adobe says its not their problem. I'm most appreciative of any help from the forum. I'm a new MAC user. Thanks in advance :-)Judy

    Not sure I understand the question, "what is your screen"?
    I have always "saved for the web" since I'm a Real Estate Photographer and MLS Web Viewing is important. I save at 300dpi. It worked ok for print when I was using MS Publisher to create my documents. My print colors were vibrant with good resolution.
    When I print aphoto dierectly from PE10, it looks great, but the same Photo printed from Pages is faded and washed out.
    In PE10 I have my color profile set to Adobe RGB. In one forum I read that Elements should be set to determine color instead of the Printer. It seems as though the PE10 color profile isn't available to Pages.
    Perhaps PE10 doesn't save the color profile in the photograph?
    How should the Photoshop Elements Profile be set up to work best with Pages so that my photos will be optimized when I print from Pages?
    I continue to use PE10 because I shoot with a wide angle lens and need to be able to correct vertical distortions.
    thanks for your help! Judy

  • Unable to see back page in print preview

    Hi Experts,
    My requirement is to print terms and conditions on the back side of the page.
    So i have created two pages 1.First and 2.Back. On pages window , in standard attributes,I declared 'First' in Page and 'Back' in Next page.And print mode i had set to 'D'-Duplex.While seeingthe print preview of the invoice i am giving the logical destination as 'LOCL'.
    I think this is the standard procedure we follow to print anything on the back side of the page.But i am not getting the back page in the print preview.
    Could anyone help me out if there is anything else that i have to do to solve this issue.
    Thanks in advance.
    Regards,
    Praveen.

    Hi Praveen,
    I have worked in this scenario,,
    In print preview you are unavble to see back page, in print preview it seems as front page onlu, if you give print, in print out your able to see back page.
    Regards
    Jana

  • How to get rid of the main text box in the back of the page AND move things

    I usually work in Adobe Illustrator, Photoshop, and InDesign, but am creating two newsletter templates in Pages for a colleague, since it will be easier for her. But, for the life of me, I can't figure out how to get rid of the main text box in the back of the page that is driving me crazy. I just want a nice blank page that I can do whatever I want with. AND, I can't figure out how to select things so that I can move them, like shapes and text boxes. Some things seem to move fine, then other things just sit there. I am at the end of my rope!!!

    Hi, Dylan. Welcome to Discussions.
    If you're referring to the area where you just start typing when you open a new blank document, you can't get rid of it. But you also don't have to use it. You can insert text boxes and size and position them as you desire. Just be sure they're defined as Fixed on Page. When one is full and you want to continue it to another page (or to the side), click in the blank blue box on the lower right side of the text box. That will create another box and your overflow text will flow into it. Then position it where needed.
    Also, you can create a text box the width of the page and then set it for 2 or more columns.
    When you want to send something to the back and you may want to access it again later, just use the send backward command. If you send it all the way to the back, it will be behind the main text layer (where it will be safe from acvcidental movement) but you will have to click outside the work area and then drag the pointer to the object to select it.
    Hope this helps to get you started.
    Walt

Maybe you are looking for

  • Infopath form taking long time to load sql data

    In infopath form having with multple views. In one of the view SQL Data will be loaded on selection of dropdown to repeating table.  If it is lessthan 1000 items its working, if it is morethan 1500 items form will hanging for 15-20 mins.  Form is dev

  • I broke my macbook pro screen, where can i get a reparation of it , and how does it cos ?t

    Where can i get a reparation for the screen of my mac book pro ? and how does it cost ?

  • How to send a single email to all recipients at one time

    Hi, With JavaMail, is there any way to send an email to several recipients at once time instead of calling Transport.send() one by one? You may state why not use address like "[email protected],[email protected],[email protected]". Because I want to

  • Albums Losing Content in iPhoto '09

    I'm running iPhoto '09, ver 8.1 on Mac OS X, ver 10.6.1: All of the sudden, without any changes other than starting and restarting iPhoto, the individual pics in the various iPhoto Albums disappeared. I still have the associated pics in the Events, b

  • Quicktime and macam -user issue?

    i have recently installed the macam driver into the library/quicktime folder in order to use a webcam ... and everything works fine with all kinds of applications-BUT i have had to create a new user so that skype recognises my webcam....could there b