Page Background Lost on Regions above Content Area for Some Pages

Hi - I am a iWeb novice, but not a total rookie on this kind of software...
I have a simple iWeb project that applies a gradient fill to the page background, and applies one of the gradient colors to the Browser background on every web page. I am using the "White" theme, and I have trouble with the "Photos" page template drawing Page backgrounds correctly. I have my content area set wider than the default to 1008 pixels to fill a 1024-wide display. I set my display area to 877 pixels high to coincide with the largest media dimension that I see with the inspector.
I looked here for previous discussions on this and failed to find anything. Maybe I missed a post...
Initially, most web pages load and display correctly the first time. One Photos web page, however, displays the Browser background - not the Page background above the centerline of the page name.
On several pages with a "Photos" template (but not all), the initial page is displayed correctly. But, when I click on a photo thumbnail and the page is revised to display the larger photo image in the content area, the Browser background is displayed in error above the content area, and the Page background displays correctly below the top of the content area.
I have looked for some consistent issue or characteristic that might let me predict when this problem occurs, but it ll looks rather random. It is repeatable, though - clearing caches and reloading the same page exposes the problem the same way a second time for the same page, in other words...
Is this a bug, or something subtle in placement or overlap of areas on the page that I haven't noticed? Anything to be careful with to avoid this problem?
Thanks anyone for any advice!
Brian
Message was edited by: Brian Crowe1

Hi Cyclosaurus and Apnewbie -
Thank you for your interest and replies. Here is a simple page that illustrates the problem I am having with a Page Background Gradient Fill on top of a Browser Background Solid Fill
http://web.mac.com/bccrowe/Troubleshooting/KyliesArt2.html
Here, I intend the page from the very top to the bottom of the defined content area to transition from pink to white as the eye moves left to right. The browser background is also pink to add some depth to the image - that's what you will see when the page loads.
Click on the child's drawing to present the image, and you should see the gradient disappear above the centerline of the second text box (above the comment area) when the page finished loading with the large drawing.
The Content area coincides precisely with the bottom of that second text box. I have tried to move the content area further below the text boxes so that they are not imtimate - no difference. I haven't tried to separate the text boxes, yet.
The two text boxes immediately above the content area are 45px x 630 px (18 pt text) and 30 px x 630 px (14 pt text) - they overlap by about 10 pix.
The content area that displays the thumbnail is 1008 px x 445 px (I thought that I set that at 877px...). I can try to set the content area to 877 px... Maybe this is the problem - maybe the Page Background shifts down to coincide with the bottom of the next page#2... Hmmm...
When you click on the thumbnail, the page#2 content area is 1008 px x 877 px.
In iWeb, this all looks the way I want it to.
Please diddle with the page, and ask me any new questions! I appreciate your insight and help. In reality, Kylie won't notice the background change, but my next objective is a corporate site - this child's site is my "training" site. iWeb is really pretty flexible and easy to use. If I there's a work-around or something to avoid, I can live with iWeb just fine.
Thanks again -
Brian

Similar Messages

Room part page occupying det. nav and portal content area..

Hi,
I have created a room part from a custom created room-part template (say MyGoogle room part template). i have added a parameter called "search term". So, when creating a room, the user should enter a value in this parameter(say FLOWER) ... and the result.... should be..as follows:
>>>>>>>>>>>>>The URL should then always load with the following url: http://www.google.com/search?hl=en&q=FLOWER. Everytime a member of the room enters the room, they see a search in Google, with results for the search term - "FLOWER".
Well! i have achieved this ...but, the problem is that.. the detailed navigation is going away and the google results page is occupying the entire area below TOP LEVEL Navigation.. (detailed navigation area & portal content area).. I want the resulting page to be displayed in portal content area only .. and the detailed navigation should be visible too(with room hierarchy and stuff) ..
Any1 who can help me on this...
Regards,
SK.

Hi All,
Any ideas?
I just want to get rid of the redirection - I am using a redirect, and it takes away the left navigation pane!
My component should be able to load a webpage without redirecting and taking over the entire lower half of the portal screen.
Regards,
SK.

Setting a default content area for simple search

How to set up a default content area/all content areas for simple search when searching from a page?
The only way i can set a content area, is to go to advanced search and specify the content area or say all content areas
When i am searching from a content area, simple search searches the same content area.

Harish,
One simple way is create a navigation bar in the content area you are interested in searching, containing just the search element, and expose that navigation bar as a portlet.
Now you can add this portlet to any page and the search will search only on the content area it belongs to.
null

Every time I try to open a new web page a window pops up saying the certificate for the page is invalid?? It won't let me on my emails or Facebook

Every time I try to open a new web page a window pops up saying the certificate for the page is invalid?? It won't let me on my emails or Facebook

This could be a complicated problem to solve, as there are several possible causes for it.
Back up all data, then take each of the following steps that you haven't already taken. Stop when the problem is resolved.
Step 1
From the menu bar, select
           ▹ System Preferences... ▹ Date & Time
Select the Time Zone tab in the preference pane that opens and check that the time zone matches your location. Then select the Date & Time tab. Check that the data and time shown (including the year) are correct, and correct them if not.
Check the box marked
          Set date and time automatically
if it's not already checked, and select one of the Apple time servers from the menu next to it.
Step 2
Start up in safe mode and log in to the account with the problem.
Note: If FileVault is enabled in OS X 10.9 or earlier, or if a firmware password is set, or if the startup volume is a software RAID, you can’t do this. Ask for further instructions.
Safe mode is much slower to start up and run than normal, with limited graphics performance, and some things won’t work at all, including sound output and Wi-Fi on certain models. The next normal startup may also be somewhat slow.
The login screen appears even if you usually login automatically. You must know your login password in order to log in. If you’ve forgotten the password, you will need to reset it before you begin.
If the problem is not reproducible in safe mode, then it's caused by third-party "anti-virus" or "security" software. If you know what that software is, remove it as directed by the developer after backing up all data. If you don't know what it is, ask for instructions.
Step 3
Triple-click anywhere in the line below on this page to select it:
/System/Library/Keychains/SystemCACertificates.keychain
Right-click or control-click the highlighted line and select
          Services ▹ Show Info
from the contextual menu.* An Info dialog should open. The dialog should show "You can only read" in the Sharing & Permissions section.
Repeat with this line:
/System/Library/Keychains/SystemRootCertificates.keychain
If instead of the Info dialog, you get a message that either file can't be found, reinstall OS X.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. Open a TextEdit window and paste into it by pressing command-V. Select the line you just pasted and continue as above.
Step 4
Launch the Keychain Access application in any of the following ways:
☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
☞ Open LaunchPad and start typing the name.
In the upper left corner of the window, you should see a list headed Keychains. If not, click the button in the lower left corner that looks like a triangle inside a square.
In the Keychains list, there should be items named System and System Roots. If not, select
          File ▹ Add Keychain
from the menu bar and add the following items:
/Library/Keychains/System.keychain
/System/Library/Keychains/SystemRootCertificates.keychain
Open the View menu in the menu bar. If one of the items in the menu is
          Show Expired Certificates
select it. Otherwise it will show
          Hide Expired Certificates
which is what you want.
From the Category list in the lower left corner of the window, select Certificates. Look carefully at the list of certificates in the right side of the window. If any of them has a blue-and-white plus sign or a red "X" in the icon, double-click it. An inspection window will open. Click the disclosure triangle labeled Trust to disclose the trust settings for the certificate. From the menu labeled
          Secure Sockets Layer (SSL)
select
          no value specified
Close the inspection window. You'll be prompted for your administrator password to update the settings.
Now open the same inspection window again, and select
          When using this certificate: Use System Defaults
Save the change in the same way as before.
Revert all the certificates with non-default trust settings. Never again change any of those settings.
Step 5
Select My Certificates from the Category list. From the list of certificates shown, delete any that are marked with a red X as expired or invalid.
Export all remaining certificates, delete them from the keychain, and reimport. For instructions, select
          Help ▹ Keychain Access Help
from the menu bar and search for the term "export" in the help window. Export each certificate as an individual file; don't combine them into one big file.
Step 6
From the menu bar, select
          Keychain Access ▹ Preferences... ▹ Certificates
There are three menus in the window. Change the selection in the top two to Best attempt, and in the bottom one to CRL.
Step 7
Triple-click anywhere in the line of text below on this page to select it:
/var/db/crls
Copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
          Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
A folder named "crls" should open. Move all the files in that folder to the Trash. You’ll be prompted for your administrator login password.
Restart the computer, empty the Trash, and test.
Step 8
Triple-click anywhere in the line below on this page to select it:
open -e /etc/hosts
Copy the selected text to the Clipboard by pressing the key combination command-C.
Launch the built-in Terminal application in the same way you launched Keychain Access.
Paste into the Terminal window by pressing command-V. I've tested these instructions only with the Safari web browser. If you use another browser, you may have to press the return key after pasting. A TextEdit window should open. At the top of the window, you should see this:
# Host Database
# localhost is used to configure the loopback interface
# when the system is booting. Do not change this entry.
127.0.0.1                              localhost
255.255.255.255          broadcasthost
::1                                        localhost
fe80::1%lo0                    localhost
If that's not what you see, post the contents of the window.

Link to Content Area from ASP page brings up default page

I have a link on an ASP to the content area. When the user clicks on the link, he/she is required by the portal to provide their username/password. After entering the correct information, the users are displayed their default page NOT taken to the content area.
Any ideas?

Unfortunately, the only way to do this would be to not show the sub-folder region and add URL items in another region that link to the folder page in question.

Content Area in a page Template should not be inside a h:form

In my template page I have some buttons which reside in a <h:form> tag. If I place a Content Area somewhere inside the <h:form> tag, the ACTION methods of the buttons DO NOT WORK!!!!
e.g. Action methods of the buttons WORK PROPERLY
<f:view>
<BODY>
<h:form styleClass="form" id="frmTemplate">
...some buttons...
</h:form>
<%-- tpl:insert attribute="bodyarea" --%>Default content of bodyarea<%-- /tpl:insert --%>
</BODY>
</f:view>e.g. Action methods of the buttons DO NOT work
<f:view>
<BODY>
<h:form styleClass="form" id="frmTemplate">
...some buttons...
<%-- tpl:insert attribute="bodyarea" --%>Default content of bodyarea<%-- /tpl:insert --%>
</h:form>
</BODY>
</f:view>Any ideas why?

AFAIK there's no practical way to do what you require. Sorry. This is one of the many downsides to Framed sites. It also makes bookmarking and printing pages difficult. Not to mention user unfriendly from a web accessibility viewpoint. Re-think your need for Iframes throughout an entire website. The best websites use one complete page for each topic. Index, About Us, Contact Us, etc...
Nancy O.
Alt-Web Design & Publishing
Web | Graphics | Print | Media Specialists
www.alt-web.com/
www.twitter.com/altweb

How make the Top-level Navigation and Content Area in one page as a whole?

I want to make the Top-level Navigation and the Content Area in the one page as a whole displayed in user interface.In the default framework,the Top-level Navigation and the Content Area were contained in 2 pages, So the vertical scroll bar could only control the Content Area. I want to control the full page with one vertical bar like the page of "www.sdn.sap.com" Web.

Hi Jianguo,
One advantage of the external facing portal solution (SP14) is that the framework page is displayed in a single frame. Perhaps this could be of use to you.
Hope this helps.
Daniel

Content Area in Portal Page: subfolder vs category

Hi everybody,
i've tried to publish a content area + navbar in a portal page: if i click to a SUBFOLDER on the folder portlet , the subfolder appears in the context of the portal page. But if i click a link to a CATEGORY, the category is loaded in the content area and not in the portal page. Does anybody know how to keep the content area in the portal page, that is
to refresh the
portlet in the context of the portal page ?
Thanks.

Currently not possible. We're considering this for a future release.
Regards,
Jerry

JavaScript search main content area of a page

Hi
I am hoping someone might be able to help. I am new to SharePoint and I'm looking to write a script on the master page which searches through the main content of a certain webpage.
My question is; what is the variable for JavaScript to call the main content area so I can search it. I believe it is something like item.maincontentarea?
Any help is appreciated.
Thank you

Hi
This could sometimes happen because of multiple users working on the same content .
Edited by: chandana kallu on Mar 11, 2008 1:41 PM

Deactivate automatic content migration for Web Page Composer (WPC) 2

Hi,
on our production system we are using at the moment Web Page Composer for SAP NetWeaver 7.0. Soon we would like to upgrade the system to release 7.3
We have now already set up the content for the new Web Page Composer on a pre-production system. After the production system is upgraded to the new release, it is planned that we will transport the content for the new Web Page Composer from the pre-production to the production system.
As far as I know, the content of the old Web Page Composer gets automatically migrated during the upgrade of the production system. Due to the reason we will the use content of the pre-production system, the automatic migration step is not necessary anymore during the upgrade.
Is there any configuration option that allows us to disable the automatic migration of old Web Page Composer content?
Best regards
Mario

Regarding the feedback of the SAP support, it is not possible to deactivate the automatic content migration for the Web Page Composer.

History , Back and forward button to be disabled for some pages

Hi ,
There are buttons ( history, back and forward) just below the top level navigation in portal.
Is there a way that some pages can be restricted in History , Back and Forward operations so that some pages cannot be captured with history , back or forward actions in portal.
Best Regards
Sid

Hi Siddharth,
If we open our framework page there is something called Page title bar. This contains History, Back and Forward button. If we make it disable it'll not be visible in our portal.
So according to your requirement you can create a new framework page and can make changes in that framework page. Assign this framework page to a portal desktop and use it where you want.
Please reward the points if it is useful.
thanks,
pankaj

Hideing and showing a page or security for some pages

i have developed an applciation where in which i want users to have acces
to some pages and some pages are secured they can be viewed only after entering some credentials.
how can we do this some body help me

Create an authentication scheme and an authorization scheme (under Shared components)
and in the page attributes (top left) you can select these schemes to be active for the page.
Hope this helps.
Leo

Sending email for some pages of a report

Hi!
I would like to know, is it possible to send via email some pages of a SAPScript.
I've created a report, with SAPScript output. The report is collecting a lot of data, and is grouping the data by customer.
So at the end of the report run, I have 5 pages, with a grouping like this:
1. Customer A / Deliveries 1,2,3
2. Customer B / Deliveries 4,5
3. Customer C / Deliveries 6,7,8,9
4. Customer D / Deliveries 10
5. Customer E / Deliveries 11,12
In the B, D customer master data exist an email address, so I have to send the 2nd page to the email address of B (for example [email protected]) and the 4th page to the email address of D (f.e.: [email protected]).
How can I solve this?
Thanx
Tamá

Hi!
The following coding provides the SAPScript list, now. This is what I would like to extend with the email sending.
The table it_fuvar contains the data of the customers and deliveries. I think I have to enter the email sending between the END_FORM and START_FORM function modules.
My problems are:
- is the OTF ready and convertable to PDF at this moment (after an END_FORM)?
- if it is, then how identify it to convert and how to send the converted PDF via attachment?
DESCRIBE TABLE it_fuvar LINES fcount.
IF fcount = 0.
 WRITE:/ 'Nincsen nyomtatható adat.'.
 EXIT.
ENDIF.
SET LANGUAGE sy-langu.
CLEAR wa_itcpo.
MOVE 'X' TO wa_itcpo-tdimmed.
MOVE 'X' TO wa_itcpo-tdnewid.
MOVE sy-repid TO wa_itcpo-tdsuffix2.
MOVE sy-title TO wa_itcpo-tdtitle.
* open form
CALL FUNCTION 'OPEN_FORM'
 EXPORTING
 OPTIONS = wa_itcpo
 dialog = 'X'
 form = gc_formname
 language = sy-langu
 EXCEPTIONS
 canceled = 1
 device = 2
 form = 3
 OPTIONS = 4
 unclosed = 5
 mail_options = 6
 archive_error = 7
 OTHERS = 8.
IF sy-subrc NE 0.
 EXIT.
ENDIF.
MOVE 1 TO fcount.
SORT it_fuvar.
LOOP AT it_fuvar INTO wa_fuvar.
 AT NEW vstel_bez.
* speditőr címadatok kiírása a scriptbe
 CALL FUNCTION 'WRITE_FORM'
 EXPORTING
 window = 'M_SPEDIT'
 EXCEPTIONS
 OTHERS = 1.
* cím, téma, számlázási cím kiírása a scriptbe
 CALL FUNCTION 'WRITE_FORM'
 EXPORTING
 window = 'M_INFO'
 EXCEPTIONS
 OTHERS = 1.
 CALL FUNCTION 'WRITE_FORM'
 EXPORTING
 element = 'M_SZALLITASI_CIM'
 EXCEPTIONS
 OTHERS = 1.
 ENDAT.
 AT NEW tknum.
 SUM.
* kocsik (transzportok) kiírása a scriptbe
 CALL FUNCTION 'WRITE_FORM'
 EXPORTING
 element = 'M_KOCSI'
 EXCEPTIONS
 OTHERS = 1.
 fcount = fcount + 1.
 ENDAT.
* print item line
 CALL FUNCTION 'WRITE_FORM'
 EXPORTING
 element = 'M_ARUFOGADO'.
 AT END OF vstel_bez.
* footer
 MOVE 1 TO fcount.
 CALL FUNCTION 'WRITE_FORM'
 EXPORTING
 window = 'M_BOTTOM'
 element = 'NEW_PAGE'.
 CALL FUNCTION 'END_FORM'
 EXCEPTIONS
 unopened = 1
 bad_pageformat_for_print = 2
 spool_error = 3
 codepage = 4
 OTHERS = 5.
 IF sy-subrc <> 0.
 ENDIF.
* EMAIL SEND???
* EMAIL SEND???
* EMAIL SEND???
 CALL FUNCTION 'START_FORM'
 EXPORTING
 form = gc_formname
 language = sy-langu
 EXCEPTIONS
 form = 1
 format = 2
 unended = 3
 unopened = 4
 unused = 5
 spool_error = 6
 codepage = 7
 OTHERS = 8.
 IF sy-subrc <> 0.
 ENDIF.
 ENDAT.
ENDLOOP.
CALL FUNCTION 'CLOSE_FORM'
 EXCEPTIONS
 OTHERS = 1.
Thanx
Tamá

Firefox update page opens instead of about:blank as set for start page

question above says it all

See these articles for some suggestions:
* https://support.mozilla.com/kb/Firefox+has+just+updated+tab+shows+each+time+you+start+Firefox
* https://support.mozilla.com/kb/How+to+set+the+home+page - Firefox supports multiple home pages separated by '|' symbols
* http://kb.mozillazine.org/Preferences_not_saved

Region backround colors are overwritten by page backround color. why ?

I like to have the navigation/banner bar with one backround color and the body (other regions with portlets) with white (no) backround color. How to do ?
The page-style/backround color always overwrites the Navigation bar style/backround color.
Any idea ?

Solution found:
Ensure you apply the style to the Navigation Bar (use separate styles) and to the page separately. i.e.
despite you hv the option to edit the header/banner/navigation bar in the graphic page mode you shud apply STYLE modifications not in that environment. Go to Navigator, pagegroup, page, navigation bar and modify the navigation bar în this navigation bar edit mode only (click style on top). So you can clearly separate the navigation bar styles from the page style.
That works !!

Page Background Lost on Regions above Content Area for Some Pages

Similar Messages

Maybe you are looking for