Page cannot be displayed while  running report in OAS (10.1.2.3)form/report

Hi All,
I have a report which take 4 hrs time to execute the report
If i run this 4 hrs report,the report runs sucessfully when we see in particular
report server in application server.
But, we wont get any pop up to open report after executing sucessfully
at user end, A error message is displayed in only report param page like,
"The page cannot be displayed"
I Think only param page is expired but not form session.
We have also set the parameters like in report/conf/repsername.conf
engineResponseTimeout=30 and <connection maxConnect="200" idleTimeOut="300">
Also,In httpd.conf timeout is 3600 and MaxBlockTimeout in web.xml file
we have set "maxBlockTime" for long running report (4h)
<init-param>
<param-name>maxBlockTime</param-name>
<param-value>12600000</param-value>
</init-param>
Please help me out to solve this issue.
Regards
Kirana

I am facing a similar problem. Did you find a solution to this problem?
Thanks
Karnail

Similar Messages

  • Parameter Page Displays "Page Cannot Be Displayed" while running report

    Hi All,
    I have a report which take 4 hrs time to execute the report
    If i run this 4 hrs report,the report runs sucessfully when we see in particular
    report server in application server.
    But, we wont get any pop up to open report after executing sucessfully
    at user end, A error message is displayed in only report param page like,
    "The page cannot be displayed"
    I Think only param page is expired but not form session.
    We have also set the parameters like in report/conf/repsername.conf
    engineResponseTimeout=30 and <connection maxConnect="200" idleTimeOut="300">
    Also,In httpd.conf timeout is 3600 and MaxBlockTimeout in web.xml file
    we have set "maxBlockTime" for long running report (4h)
    <init-param>
    <param-name>maxBlockTime</param-name>
    <param-value>12600000</param-value>
    </init-param>
    Please help me out to solve this issue.
    Regards
    Nagaraj

    Parameter Page Displays "Page Cannot Be Displayed" while running report

  • The page cannot be displayed while running the report with web link

    Hello,
    I tried to run the report using a web link similar:
    http://hostname/reports/rwservlet?report=WRFTCKL.rdf&userid=use/pass@datbase&desformat=pdf&destype=CACHE&paramform=yes
    I am able to see the parameter form, but after I entered some parameter and submit, I got an error as:
    The page cannot be displayed.
    But if I run it with the paramform=no and attached the parameter/value pair at the end of the link, the report will show on the web.
    Anyone knows what is wrong?
    Thanks.

    try this sample report from
    http://www.alexyscorp.com/products.htm
    (Download the Forms Reports Integration based on run_report_object (FMB,RDF) )

  • Run report cause "The page cannot be displayed"  OR The connection with the

    Hello,
    1. Database oracle 10g R2 on windows 2003 server enterprise edition with SP2
    2. Application Server Oracle 10g R2 on Windows 2003 Server with SP2.
    Problem explanation
    one of our branch which is connected via leased line is unable to run some of the reports if the report have a little more
    data,
    one report i tried its size is almost 900k ( they are using the same line since last three month and they are
    able to run all reports before, bandwidth is 128k), if you run report browser search a little while
    for output then displayed "The page cannot be displayed" if you look at the report log it's finished successfully.
    I try to download the report rather opening in browser it reach to end of in downloading window at the end it display
    this message
    Internet explorer can not download getjobidxxx.xls from oracleaps.domain.com
    The connection with the server was reset.
    I want to mention one more thing there is a ISA server and firewall in between client and Server but its the same condition
    for
    head office client but they are able to run all report with out any error.
    any one have idea??
    Thanks and Regards,
    Khawar

    Hello,
    Thanks for reply, I have posted Service Request to Oracle Metalink and finally resolve the issue, they suggested me the following solution( a note has also been posted in Knowledge Base no. 871016.1 )
    Webcache KeepAlive timeout is reached. (The default value for KeepAlive timeout is 5 seconds)
    Increase the Keepalive time in webcache to a higher value
    **************EOF******************
    Thanks and Regards,
    Khawar

  • When i open my SQL reporting URL it says this page cannot be displayed

    Hi All,
    I am using SQL Server 2008 with SP3. When i open my open my reporting manager URL. i get the error as "This page cannot be displayed" HTTP Error 500 internal server error. I read few blogs posted below. Tried both but could not help me out
    http://social.technet.microsoft.com/Forums/en-US/1a03196f-f8ee-4a66-b08b-b2e02447a25e/can-not-open-page-for-report-manager-url-httplocalhost8080reports-for-sql-server-2008?forum=sqlreportingservices
    and 
    http://ashwaniashwin.wordpress.com/2014/02/28/the-url-has-already-been-reserved-error-while-configuring-the-report-server-url-in-reporting-services-configuration-manager/
    But none of them helped.
    I tried deleting the reserved URL and re reserved but still did not help.
    Tried changing the port number but still no luck.
    I analysed the sql reporting error log and found the below.
    ===============================================
    library!ReportServer_0-1!ad4!06/07/2014-03:30:52:: Call to GetSystemPropertiesAction().
    ui!ReportManager_0-2!fbc!06/07/2014-03:30:54:: e ERROR: Unable to validate data.
    ui!ReportManager_0-2!fbc!06/07/2014-03:30:54:: e ERROR: HTTP status code --> 500
    ===============================================
       at ReportingServicesHttpRuntime.BaseWorkerRequest.FilterAndThrowException(Exception e, String message)
       at ReportingServicesHttpRuntime.RsWorkerRequest.GetUserToken()
       at System.Web.HttpContext.get_ImpersonationToken()
       at System.Web.ClientImpersonationContext.Start(HttpContext context, Boolean throwOnError)
       at System.Web.HttpApplication.ThreadContext.SetImpersonationContext()
       at System.Web.HttpApplication.ThreadContext.Enter(Boolean setImpersonationContext)
       at System.Web.HttpApplication.OnThreadEnterPrivate(Boolean setImpersonationContext)
       at System.Web.HttpApplication.ApplicationStepManager.ResumeSteps(Exception error)
    library!ReportServer_0-1!e0c!06/07/2014-03:30:49:: Call to GetItemTypeAction(/).
    library!ReportServer_0-1!f10!06/07/2014-03:30:49:: i INFO: Catalog SQL Server Edition = Enterprise
    library!ReportServer_0-1!e0c!06/07/2014-03:30:49:: i INFO: Catalog SQL Server Edition = Enterprise
    crypto!ReportServer_0-1!e0c!06/07/2014-03:30:49:: i INFO: Initializing crypto as user: E2K\Lg161489
    crypto!ReportServer_0-1!e0c!06/07/2014-03:30:49:: i INFO: Exporting public key
    crypto!ReportServer_0-1!e0c!06/07/2014-03:30:49:: i INFO: Performing sku validation
    crypto!ReportServer_0-1!e0c!06/07/2014-03:30:50:: i INFO: Importing existing encryption key
    library!ReportServer_0-1!e0c!06/07/2014-03:30:50:: Call to ListParentsAction(/).
    library!ReportServer_0-1!e0c!06/07/2014-03:30:50:: Call to ListChildrenAction(/, False).
    webserver!ReportServer_0-1!e0c!06/07/2014-03:30:50:: i INFO: Processed folder '/'
    library!ReportServer_0-1!ad4!06/07/2014-03:30:51:: Call to GetPermissionsAction(/).
    library!ReportServer_0-1!f10!06/07/2014-03:30:51:: Call to GetPropertiesAction(/, PathBased).
    library!ReportServer_0-1!ad4!06/07/2014-03:30:52:: Call to GetSystemPermissionsAction().
    library!ReportServer_0-1!f10!06/07/2014-03:30:52:: Call to ListChildrenAction(/, False).
    library!ReportServer_0-1!ad4!06/07/2014-03:30:52:: Call to GetSystemPropertiesAction().
    library!ReportServer_0-1!f10!06/07/2014-03:30:52:: Call to GetSystemPropertiesAction().
    library!ReportServer_0-1!ad4!06/07/2014-03:30:52:: Call to GetSystemPropertiesAction().
    ui!ReportManager_0-2!fbc!06/07/2014-03:30:54:: e ERROR: Unable to validate data.
    ui!ReportManager_0-2!fbc!06/07/2014-03:30:54:: e ERROR: HTTP status code --> 500
    I have also attached all the logs in a FTP for further analysis. Please download it from the below link.
    https://depositfiles.com/files/cfe6af33b
    Can any one please help me. Seems to be a never ending issue to me.

    Take a look on link
    http://pcsupport.about.com/od/findbyerrormessage/a/500servererror.htm
    In case If you rebuilt the server then then linking will break , go in encryption keys option if only delete button is enabled, and backup button is disabled the delete the keys .close the report configuration manager and reopen the manager .Now try
    to open report manager url. 
    Please click "Propose
    As Answer" if a post solves your problem, or "Vote
    As Helpful" if a post has been useful to you

  • Page cannot be displayed error on oracle report 10g

    hi,
    when i ran the report from Live server ,
    I had run through "CACHE" option.
    page cannot be displayed is coming on the screen.
    how to do....
    Thanks and advance,
    Maran

    hi
    did u start OC4j? If not please start and also start u r report server.
    also check u r machine_name and port.
    sarah

  • Page cannot be displayed error while accessing links on DAS page

    Hi,
    I have installed SSO server along with DAS on a single m/c. While installing i gave OID instance hostname and password. After installation when i access the DAS homepage and click on Login or Myprofile url is is throwing Page cannot be displayed error page
    i found following in the Apache\logs\error.log
    [Wed Nov 23 10:28:26 2005] [error] [client 198.186.43.113] [ecid: 1132759706:198.186.43.113:2408:2136:6,0] MOD_OC4J_0376: Request initial processing failed in ac worker with HTTP status code 1. This status will be passed back to the listener for error handling.
    I checked OC4J_SECURITY and HTTP_Server status. They are up and running. OID is also running.
    Any solution for this problem?

    Hi,
    I once faced a similar problem - I am not sure if the issues are related, but here goes :
    I figured out that DAS uses mod_osso to connect to the SSO Server. I hadn't configured mod_osso to correctly talk to the SSO Server. I used the ssoreg.sh script in the $ORACLE_HOME/sso/bin to make the mod_osso " talk " to the SSO Server.
    After this, the DAS started working properly.
    BTW, what's your AS instance version ?

  • XML Page cannot be displayed error on interactive reports

    Hi, I am having trouble with a user downloading an interactive report as a CSV output. When a user tries to download the interactive report (as it is displayed when the web page loads, no alterations), they are getting this error:
    The XML Page cannot be displayed.
    Cannot view XML input using XSL style sheet. Please correct the error and then click the refresh button, or try again later.
    A name was started with an invalid character. Error processing resource 'http.............'.
    This is only happening with a small group of users which doesn't include me, so it has been very hard to troubleshoot. I can download the report and open in Excel without any problems.
    I am using Apex version 3.2 and IE 8. The user did not have multiple windows or tabs open logged into ApEx at the same time.
    Has anyone ever had this problem before? I could not find a thread with the same issue.
    Thanks!

    i'm pretty sure that error comes up when your browser (ie, specifically, i believe) can't render the xml data it's received. i'm also pretty sure, as the full message implies, it's because it doesn't know what style sheet to use when you go to that page. in short, it's a browser config issue. one way to bypass it (to at least prove that it's a browser issue) would be to create a link to your page, right click the link, and do a "Save Target As...". the resulting file will be your valid XML one. fwiw, i've had better luck controlling the manner in which my xml data is received when i use mozilla or netscape (but i'd imagine there's just some setting you'd toggle in IE to avoid your issue).
    hope this helps,
    raj

  • Error while executing WAD: " Page cannot be displayed"

    Hi All,
    I am facing an error while i am executing the WAD template.As soon i execute the template it gives an error as " Page Cannot Be Displayed".
    I have just used one table in my template.
    Is this some setting issue??
    Please give your valuable inputs.
    Regards,
    Kshitij Mathur-

    Kshitij,
    Check out the serivces are activated or not?
    U can check this Tcode SICF
    Select Default host->sap->bw right clik and check if its in deactive mode then activate it and save.
    Hope it helps.
    Urs,
    Rakesh.

  • Page cannot be displayed - No Web Dispatcher - Only ICM running

    Hi,
    Our training system is a ‘SAP ERP Central Component 5.0’, on a WAS 6.40 platform. There is only the Central instance running with all processes available, including ICM. The Dispatcher is NOT configured. 
    When entering following url, results in 'Page Cannot Displayed'error message:
    ===============================
    http://<virtual-FQDN>:<port>/sap/bc/bsp/sap/hrrcf_start_int?sap-
    client=230&BspClient=230&sap-
    language=EN&BspLanguage=EN&rcfSpId=9001&rcfContext=MCC
    <b>The 'Page cannot be displayed'error occurs FOR ALL SERVICES.</b> The above url was working before and as far as everyone here knows, there have been no changes.
    The following url ping tests were SUCCESSFUL. These were typed directly into the Internet Explorer Address:
    ==================================================
    http://<virtual-FQDN>:<port>//sap/bc/ping?sap-client=200
    and
    http://<virtual-FQDN>:<port>//sap/bc/ping?sap-client=230
    and
    http://<virtual-FQDN>:<port>//sap/bc/ping
    However, performing the ping test from Tx SICF, results in an error.  For some reason, the url resolves to Physical-FQDN for teh hostname.  However, when changing hostname to the Virtual-FQDN, then Ping works.  (Not sure why the Physical-FQDN is not working)
    Also testing the service ‘hrrcf_start_int’ from Tx SICF, results in the same ‘Page cannot be displayed’ error.  (Same for all services)
    From Tx SE80, INTERNAL has been selected for Publishing.
    Service has been activated. 
    Have run program SIAC_PUBLISH_ALL_INTERNAL from Tx SE38.  Services has also been deactivated and activated from Tx SICF.  None of this has helped resolve the error. 
    Some ICM parameters as follows:
    icm/server_port_0     = PROT=HTTP,PORT=8012
    icm/host_name_full    = <virtual-FQDN>
    As mentioned before, the url was working some 2 weeks back, but for some reason is no longer working.
    Regards,
    Sanjay

    Hi Dezso,
    Thanks for your suggestion.
    The issue is now being resolved.  The problem was as follows:
    Previously the on-site Consultancy had configured one of the Transport Consolidation routes from DEV to TRN.  (This has now been reconfigured so that TRN as well as PRD are the TARGET routes from QA system.
    However, previously ABAP Support Packages were applied to DEV & QA.  (& not to TRN).  Then a Developer transported the SPAU transport through the landscape and it obviously went to the TRN server.  (Transport was not imported into Production).
    So TRN had no SPs applied, but the transport had been imported into TRN due to landscape setup.
    Now the problem is due to an object that concerns authentication which was overwritten by the transport in TRN.  (Preventing user authentication).  We have a work around in that we can send the users directly through the ITS via a url, they can then authenticate and then they copy and paste the url they are using in the IE Address space.  After logging on, the IE session is still holding the session cookie, so no need to authenticate again after copying the url the user wants to use.  (I hope this makes sense?  No sure how better to describe this).
    The longer term solution will be apply the SPs also to TRN and then apply the SPAU transport to TRN and it should then be fine.
    Regards,
    Sanjay

  • XML page cannot be displayed - Servlet error

    Hi,
    I am trying to extract XML data from a source using a servlet.But i am getting this error when i run my servlet in IE :
    The XML page cannot be displayed
    Cannot view XML input using XSL style sheet. Please correct the error and then click the Refresh button, or try again later.
    The download of the specified resource has failed. Error processing resource 'http://serverA.h.c.com:9300/p2pd/cog...
    </dataset>
    Can someone please guide me why i am getting this error? Here is the servlet code that i am using :
    package com.cognos.demo;
    import javax.servlet.http.*;
    import java.io.*;
    import com.cognos.developer.schemas.bibus._3.*;
    import java.io.IOException;
    import java.io.PrintWriter;
    import javax.servlet.ServletException;
    import javax.servlet.http.HttpServlet;
    import javax.servlet.http.HttpServletRequest;
    import javax.servlet.http.HttpServletResponse;
    * To change this generated comment edit the template variable "typecomment":
    * Window>Preferences>Java>Templates.
    * To enable and disable the creation of type comments go to
    * Window>Preferences>Java>Code Generation.
    public class XMLGenerator extends  HttpServlet
         //Logging information goes here
          public void doGet(HttpServletRequest request, HttpServletResponse response) throws IOException
              response.setContentType ("text/html;charset=utf-8");
              response.setCharacterEncoding("utf-8");
              String xml = null;
              RunReport reportRunner= new RunReport();
              CRNConnect connect=new CRNConnect();
              String url="http://serverA.h.c.com:9300/p2pd/servlet/dispatch";
              String nameSpace="ADS_NS";
              String uid="cognos";
              String pwd="abcd45";
              Logon sessionLogon = null;
              int REP_XML=1;
              try {
              connect.connectToCognosServer(url);
              catch (Exception e)
                   e.printStackTrace();
                   //System.out.println("Not able to connect to Cognos Server");
                   response.getWriter().print("Cannot connect to Cognos server");
              sessionLogon=new Logon();
              String logonOutputSource = "";
              String reportOutput=null;
              //Till the user gets logged in or he exits
              while (!Logon.loggedIn(connect)) {
                   try
                        logonOutputSource = sessionLogon.quickLogon(connect,uid,pwd);
                        //System.out.println("Connected to the Cognos server..");
                        System.out.println(logonOutputSource);
                   catch(Exception ex)
                        System.out.println("Error : Unknown host ");
                   if (!Logon.loggedIn(connect)) {
                        response.getWriter().print("Unable to logon");
                        System.exit(0);
              //Report Processing here
              //String reportName=args[0].trim();
              //locate the selected report
              BaseClassWrapper selectedReport=null;
              selectedReport=reportRunner.findReport(connect);
              reportOutput=reportRunner.runReport(connect,selectedReport,REP_XML,false);
              xml=reportOutput;
              //System.out.println("Main:" + reportOutput);
              System.exit(0);
              try
                   response.getWriter().print(xml);
                   response.getWriter().flush();
              catch (IOException e)
                   response.getWriter().print("Unable to publish xml");
                   System.out.println(e);
    }I am using some classes to extract xml data from a data source and retrieve that as a string and then i am displaying it using response object.
    Any help in this regard would be highly appreciated.
    Thanks,
    Shishir.
    Edited by: Invinc4u on Dec 15, 2008 6:56 AM

    i'm pretty sure that error comes up when your browser (ie, specifically, i believe) can't render the xml data it's received. i'm also pretty sure, as the full message implies, it's because it doesn't know what style sheet to use when you go to that page. in short, it's a browser config issue. one way to bypass it (to at least prove that it's a browser issue) would be to create a link to your page, right click the link, and do a "Save Target As...". the resulting file will be your valid XML one. fwiw, i've had better luck controlling the manner in which my xml data is received when i use mozilla or netscape (but i'd imagine there's just some setting you'd toggle in IE to avoid your issue).
    hope this helps,
    raj

  • XML Page cannot be displayed An invlaid character

    While testing a report, I have noticed two issues and I believe this is the correct forum for the subject.
    A report is completing successfully with a completion status of Normal in the concurrent manager. The report has data. However upon inspection of the XML of the request (Diagnostics -- View XML) the following error message appears
    The XML page cannot be displayed
    Cannot view XML input using XSL style sheet. Please correct the error and then click the Refresh button, or try again later.
    An invalid character was found in text content. Error processing resource 'http://sinudy07.devtst.go2uti.com:4110/OA_CGI/FN...
    <ITEM_DESCRIPTION>Office supplies
    Upon inspection of the data, it appears that the offending character is an ACSII 150.
    Can you provide a solution by which alphanumeric data is properly handled in XML? Is this an encoding issue?
    Why does XML Publisher exit successfully when it has an error? When this error is detected, I am assuming that the report is incomplete, but to the end user it looks complete.
    Many thanks for your suggestions and advice.
    Tom

    Is the error message displayed in Firefox or in IE, or in a customized window that doesn't identify the browser?
    ''If it displays in Firefox:''
    It's possible that the Troubleshooter doesn't work correctly unless IE is your default browser. You could test that possibility by having IE make itself the default and testing the Troubleshooter again.
    ''If it displays in IE or embedded in another Microsoft application:''
    In a web search I found these suggestions:
    (1) Reset your Internet Explorer settings, according to http://answers.microsoft.com/en-us/ie/forum/ie8-windows_7/cannot-view-xml-using-xsl-style-sheet/ccfe80c6-c0db-4594-a7e3-475f9eac0e85
    (2) Try the System File Checker, according to http://ask-leo.com/why_do_i_get_the_xml_page_cannot_be_displayed_after_running_a_microsoft_troubleshooter.html
    Any luck?

  • "The page cannot be displayed" error in RWB with IE6 on Windows XP SP2

    The following screens in the RWB give an error "The page cannot be displayed":
    - End-to-end monitoring
    - Alert Configuration
    - Alert Inbox
    My colleague who is on IE6 on Windows 2000 can display the pages. We have the same roles.
    I searched on SAP notes and in the XI forum but could not find any response to this issue yet.
    Any ideas?
    Thanks.
    Cedric

    Not really an answer for you, but I run SP2 with IE6 and have no problems.  Could be a problem with the host being defined for the Windows 2000 user, but not yourself.  Some RWB connections are internally using the Fully qualified domain name while others don't.  I know this was an issue with our adapter engine set-up at one point after we applied SP13.

  • JSF & JDev error: The page cannot be displayed

    I'm trying to use JSF with JDeveloper. When I make my project no errors are reported, when I run it a browser opens up with an error. I added 'faces/' to the url and refreshed but still get same error message i.e. 'The page cannot be displayed'
    Here is the url:
    http://localhost:8988/jsf_app1-jsftest2-context-root/faces/hellojsp.jsp
    Here is the web.xml code:
    <?xml version = '1.0' encoding = 'windows-1252'?>
    <!DOCTYPE web-app PUBLIC "-//Sun Microsystems, Inc.//DTD Web Application 2.3//EN" "http://java.sun.com/dtd/web-app_2_3.dtd">
    <web-app>
    <description>Empty web.xml file for Web Application</description>
    <!-- Faces Servlet -->
    <servlet>
    <servlet-name>Faces Servlet</servlet-name>
    <servlet-class>javax.faces.webapp.FacesServlet</servlet-class>
    <load-on-startup> 1 </load-on-startup>
    </servlet>
    <!-- Faces Servlet Mapping -->
    <servlet-mapping>
    <servlet-name>Faces Servlet</servlet-name>
    <url-pattern>/faces/*</url-pattern>
    </servlet-mapping>
    <session-config>
    <session-timeout>35</session-timeout>
    </session-config>
    <mime-mapping>
    <extension>html</extension>
    <mime-type>text/html</mime-type>
    </mime-mapping>
    <mime-mapping>
    <extension>txt</extension>
    <mime-type>text/plain</mime-type>
    </mime-mapping>
    <taglib>
    <taglib-uri>http://java.sun.com/jsf/core</taglib-uri>
    <taglib-location>/WEB-INF/jsf_core.tld</taglib-location>
    </taglib>
    <taglib>
    <taglib-uri>http://java.sun.com/jsf/html</taglib-uri>
    <taglib-location>/WEB-INF/html_basic.tld</taglib-location>
    </taglib>
    </web-app>
    Here is the faces-config.xml code:
    <?xml version="1.0"?>
    <!DOCTYPE faces-config PUBLIC
    "-//Sun Microsystems, Inc.//DTD JavaServer Faces Config 1.0//EN"
    "http://java.sun.com/dtd/web-facesconfig_1_0.dtd">
    <faces-config>
    </faces-config>
    Here is the hellojsp.jsp code:
    <%@ taglib uri="http://java.sun.com/jsf/html" prefix="h"%>
    <%@ taglib uri="http://java.sun.com/jsf/core" prefix="f"%>
    <%@ page contentType="text/html;charset=windows-1252"%>
    <f:view>
    <html>
    <head>
    <meta http-equiv="Content-Type" content="text/html; charset=windows-1252">
    <title>untitled</title>
    </head>
    <body>
    <h:form>
    <h:outputText/>
    </h:form>
    </body>
    </html>
    </f:view>
    Please let me know what i'm missing here. Why can I not see the page?

    When I make my project no errors are reported, when I run it a browser opens up with an error. I added 'faces/' to the url and refreshed but still get same error .
    Does the url which is invoked with Run not include a /faces/ url pattern?

  • The page cannot be displayed Error showing for workspace

    Hi All
    The page cannot be displayed Error showing for workspace.
    http://localhost:19000/workspace/index.jsp
    Other web applications working fine.... Shared Services, FDM webclient
    1. I have restarted Hyperion Workspace - Agent Service and IIS Admin service Still my problem didn't get resolved.
    2.Below web services extensions provided *"Allow"* permission in Internet information services(IIS)Manager
    Active Server Pages
    ASP.NET v1.1.4322
    ASP.NET v2.0.50727
    Internet Data Connector
    Server Side Includes
    WebDAV
    Application Pool->DefaultApp Status showing Running
    Web sites->*1.Default web site 2.Administration* Status showing Running
    Regards
    Smilee

    Correct, I just mistyped it in my thread. I just tried "http://epm.southbay.local:19000/workspace/"
    When I click Start Reporting and Analysis core serivces a command prompt window opens with the name "server" on the window, but the command prompt window itself is empty.

Maybe you are looking for

  • Trying to build the best system for Final Cut

    IWhat screen would be best suitable to work on Final Cut Pro? 1 screen or 2? 24 or 30 inch? I'm using MacPro (SAS DRIVES).Primarily I am a musician, and my end product is for music and video clip, mostly 3d and abstract art in motion. I'd be collabor

  • Fax in os 10.3.9

    Does OS 10.3.9 come with fax software? If yes, what steps do I follow to fax a Quark or Word Doucumet? I have a DSL line.

  • Compiling

    i am using sun java studio for my compile. So far i just have one .java file called mainGUI.java. I was wondering how can i make this mainGUI.java into a .jar executable. Also, if you can tell me how to add files to this such as a database, it would

  • Bex Question -- Hierarchy related

    Hi , Can we create a hierarchy in navigational attribute of one of the characteristic and use that in report bex 7.0 ? if you have any documents related to this kinldy provide Thanks Maruthi

  • SSOTokenID is invalid error

    When the protected URL accessed SSO login page is shown.Proper credentials are provided and once submitted we get "Forbidden" error. The URL on the browser is the protected URL. Observations from logs:- 2008-07-24 17:37:31.474 Error 5787:1e99e8 Polic