Page preview displaying iViews incorrectly

I am just learning Portal and have run into an issue that I'm sure folks out here can help me with. 
I created two iViews from the SAP iView transaction template.  Both transactions are custom transactions, pointing to custom Z-programs reports.  I have added these iViews to a page, assigned the standard side-by-side layout, and changed the iView Height properties to be Automatic.
The problem is, when I preview the page, the Tray Headers correctly display the title assigned to the transaction, but the selection screen displayed in each iView tray is the same.  Whatever iView displays first, the second iView seems to use this same data for its display.
It seems to be an issue related to caching, but as I am new to Portal I am not sure where to look to solve this problem.
Thanks in advance, and any help would be appreciated.
Terri

Hi Terri,
If you think that the issue is with regards to cache, then have a look at this document for more information
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/71d7b8dc-0701-0010-dfba-881dba1b5b95?QuickLink=index&overridelayout=true
Regards,
Ganesh N

Similar Messages

  • Page not displaying iviews

    Hi Experts,
    I created a page with 2colums and assigned same iview 4 times. When I saw the preview of the page it shows 4 iviews in a page. I assigned page to role and tested, page shows only 2 iviews in First column only. Second column iviews is not displaying.
    Guide me to resolve this issue.
    Thanks,
    Srinivasu.Y

    Hi Srinivasu,
    The property of the iview that i mentioned is "Cache Level", check check this is set to none.
    And also you can check in the page in the page content section that all the iview added to it, have the check box visible selected.
    Regards

  • The preview display is Incorrect in pdf for Disclosure management

    I am trying to create a report with formatting in disclosure management. I have created the chapters and gave the content type as word document. When i create overall report from DM interface and look at the preview in word and pdf, word is displaying fine but in PDF the format looking distorted and displaying incorrectly.
    Any input is appreciated.

    Hi Alfred,
    I am having an issue with preview. PDF and Word are different:
    - Word - rounded edges charts
    - PDF square edged charts
    Do you have any idea why that might be the case?
    Regards,
    Milena Paunova

  • BSP iview Pages not displaying since moved to QA?

    Hi All,
    We're using MSS 60.1.20 and ESS 50.4.  We have created a number of  custom BSP iviews and have grouped them on some custom pages.  These work perfetly fine in DEV but once we transported them to QAS, they data is not being displayed.  The iview titles are being displayed and the iviews are in the correct position but no data is being output on the iviews.  I've checked the BSP in R/3 and is working perfectly fine.
    If i preview the iviews individually (rather than previewing the page in it's entirity), they display perfectly fine.
    So why do they not display when they're on the page?  Is there some parameter that i'm missing?
    What could be different between dev and qas?
    This is a very strange problem and its holding us up in our testing and we're due to go live fairly soon, so any guidance would be most welcome.
    Thanks in advance,
    Liz.

    Liz,
    check the height of the page.
    there will be a expand/collapse on the top right corner,check whether it is expanded or not
    Thanks
    Bala Duvvuri

  • PO print preview displays incorrect setting in decimal places

    Dear Experts
    Please help me on the following condition.
    I have a problem in print preview of a PO. It displays the incorrect setting for decimal place in currency.
    It shows USD 1.404,00 whereby the amount should be USD 1,404.00
    This only happens to a certain vendor that is doing PO for the first time from that country
    Example:
    I'm creating a PO for vendor 123. Vendor 123 is located in country A. No PO has been created for any
    vendor in country A before. When I saved my PO, in print preview, the decimal setting is not correct.
    But when I'm creating another PO, for vendor 234. Vendor 234 is located in country B. There have been
    several POs created for vendors in country B before. When I saved my PO, in print preview, the decimal
    setting is correct.
    Both vendor 123 and vendor 234 is using currency of USD.
    Is there any other setting with the vendor master in regard with the currency decimal setting for each
    country for the vendor? Or something that I've missed out?
    Diagnosis:
    I've checked with the user profiles->default-> decimal notation. It displays 1,234,567.89 correctly
    I've also run OY04, but the decimal setting is correct.
    Thank you
    Regards
    Syukri

    this has nothing to do with print preview, it is just basic country setting (OY01) how a quantity and value is written on a PO to a vendor is country xyz.
    German uses to comma to seperate decimals, while USA uses the point to seperate decimals
    this would be the German version 1.404,00, and this the US version:: 1,404.00
    so if an American sends a PO to a German vendor, then the document will show 1.404,00 so that the German can understand that he wants 1404. (and not 1000 times less)

  • One of my iWeb site pages is displaying incorrectly on Google Chrome.

    I've been using iWeb to publish to my FTP hosted by Bluehost for years.  Recently, one of my pages is displaying completely wrong and only shows minimal text and nothing else, it should look like all of the other main pages.  All other pages work perfectly on my site (www.VincentFWelch.com) except for the following page: http://www.vincentfwelch.com/live/ADS.html   I've tried clearing all of my browsing data as well as re-installing Google Chrome, nothing seems to fix this.  Can anyone confirm this is an issue only on my Mac or if every mac using Google Chrome displays this page incorrectly?

    It doesn't display in Safari either.  Are you publishing directly to the ftp server or to a folder on your hard drive and then uploading with a 3rd party FTP client?
    If it's the former publish your site to a folder on your hard drive and open it locally with your browser.  See if that page loads normally. If so then it's the upload process that's failing.
    On possible fix is to use the File ➙ Publish Entire Site menu option in an attempt to get all of the files uploaded.
    It appears that the files for the ADS page are not being uploaded.  You can use a 3rd party FTP client like YummyLite, Cyberduck or Trasnmit to upload the folder for the ADS page manually.
    OT

  • 'Access is denied' error in ESS iViews & Page not displayed' thru. internet

    Hi,
      We are implementing <b>ESS(Webdynpro)/MSS(Java)</b>.
      We are in EP6 SP13.
      We want to put our portal on internet through SSL.
    I have installed SAP Webdispatcher and configured it to support SSL. SAP webdispatcher is installed on a DMZ machine(hostname: SAPROUTER).
    <i>webdispatcher ports:</i>
    http port: 80
    https port: 8443
    1) When i try to access the portal from the DMZ machine (where the webdispatcher is installed) using <b>https://saprouter.domainname.net:8443/irj/portal</b>, i am able to see all the iViews.. but, i am getting '<b>access is denied</b>' error(in the status bar) when i try to click on any link in ESS iViews (for ex: working time, Employee search).. when i try to double click i am getting javascript:void(0)
    2) When i try to access the portal through internet(<b>https://<ipaddress>:8443/irj/portal</b>), I get the logon page and after logging in... i am not able to see the ESS and Transaction iViews .. getting 'Page cannot be displayed' error.
    When i am able to see the iViews in the DMZ machine.. why are they not being displayed when i access through internet??
    Can any1 help me in this regard?? What am i missing ??
    Awaiting your reply.
    Regards,
    SK.

    It’s a hot topic I think,
    Where facing the exact same problems.
    When we logon ‘LOCAL’ to the Portal the iview works. (Not true the internet / DMZ)
    But when we logon true the webdispatcher we get the Portal Layout, so the dispatcher works.
    But the WEBdynpro Iview gives the error -> ‘Page not displayed'
    And when we edit the file “hosts” on the pc of the client browser and fill in the hostname of the SAP Portal the Iview works…..???
    There are no ports closed on the firewall, everything is allowed.
    Can anyone tell me of it’s necessary to edit the Web Dynpro Runtime Environment. Here are some settings for the WEBdispatcher but I can’t get it working.
    -     sap.webdispatcher.host           = Defines the host of a used Web Dispatcher
    -     sap.webdispatcher.port            = Defines the port of a used Web Dispatcher
    -     sap.webdispatcher.protocol      = Defines the protocol of a used Web Dispatcher
    See the link -> http://help.sap.com/saphelp_nw04s/helpdata/en/43/8a1a8ece230c8ce10000000a11466f/frameset.htm
    When I activate the trace on the webdispatcher
    (D:webdispsapwebdisp.exe pf=D:webdispsapwebdisp.pfl -t 2)
    In the Tracefile I can see that the webdispatcher resolves the SAP portal system. That’s was aleady confirmed by seeing the portal framework from the client. I think that the WEBdynpro’s have to be remote activated, or some addition settings in the webdispatcher.
    If somebody get an idée I really would like to know it.
    Best regards,
    Edwin

  • Displaying an Incorrect page in a tab control

    I'm coming across a weird issue for the first time. I've got a typedef tab control, and when I open the VI, the contents of the first page are displayed in the control, even though the first page is not the active tab. I've attached an example VI. When test tab.vi is opened, you'll notice the String page is active, but the Boolean control is visible. This persists even when the VI is run. Switching pages makes the correct controls display. This only seems to happen when the tab control is a typedef, but I haven't done any thorough testing.
    I've observed this on 8.20, which is the most recent version I have installed. I looked for, but didn't find, this issue in the 8.5 or 8.6 bug fix lists. Can anyone confirm that this is happening or let me know if it does not persist in more recent versions?
    Attachments:
    tab control.zip ‏11 KB

    altenbach wrote:
    However, once I operate the tab, go back to the string tab, make current values default, and save, things are OK next time I open it.
    It is also good in 8.2.1 once I do the same.
    LabVIEW Champion . Do more with less code and in less time .

  • How can I stop Firefox 4 from displaying "The document cannot change while Printing or in Print Preview" from appearing every time I click on File/Page Preview?

    Clicking on File/Page Preview in Firefox 4 brings up a warning dialog "The document cannot change while Printing or in Print Preview" every time. How can I stop this from happening? It is very annoying, and it is necessary to click "OK" on this dialog twice before it will go away. Thank you.

    Does it behave that way in [[Safe Mode]] ?
    If it doesn't, then one of your add-ons in the culprit.

  • Displaying iView properties

    Hi,
    I created a JSP that contains a link to a portal iView that should be open in a new window.
    The problem is that new window appears with all the framework page.
    Is there a way to avoid this ?
    Thanks.
    Regards.

    Hi David,
    meanwhil I found out how to display iViews without portal masthead, navigation panel, etc. Use the following URL:
    http://<server>:<port>/irj/servlet/prt/portal/prtroot/<PCD_PATH>
    Replace <PCD PATH> with the pcd path of the iView. But be aware that you have to replace the chars ":" (with !3a) and "/" (with !2f).
    In the end it should look like this
    http://<server>:<port>/irj/servlet/prt/portal/prtroot/pcd!3aportal_content!2fmyfolder1!2fmyFolder2!2fMyiView
    Best regards,
    Martin

  • Columns in Dreamweaver CS3 Template Pages Not Displaying Correctly in IE8

    I have a site that has most pages created with a template page that displays three columns below the navbar (counting a small column to the left for the logo at the top the table has four columns).  The home page (index.html - not from the template) displays the same colums as the template pages correctly, but all the pages created with the template show the first column as way to wide and the next two columns as far too narrow.
    I have trawled the internet to find a solution, but as my knowledge of HTML is limited it is proving near impossible for me to even find a relevant forum topic, let alone a workable solution.  All I want is for the template pages with three visible columns below the navbar to display the same widths as those in index.html.
    I am working on a mac and the pages all preview fine in Safari, Firefox etc, but not in IE8 on Windows 7 machines.
    I have tried rather indelicately to shove various bits of code in to fix the width of the columns and render such commands as table-layout=fixed etc, but with absolutely no effect.
    The site is: www.southoverfoods.com
    If anyone can help I will be grateful.

    You do want to fix these errors -
    http://validator.w3.org/check?uri=http%3A%2F%2Fwww.southoverfoods.com%2Fabout.html&charset =%28detect+automatically%29&doctype=Inline&group=0
    Most are straightforward.
    If you view the page in IE9, and click on the compatibility icon, the rendering looks right.  Unfortunately, I cannot force that rendering with any of the accepted meta tag usages!
    <meta http-equiv="X-UA-Compatible" content="IE=7" />
    <meta http-equiv="X-UA-Compatible" content="IE=8" />
    <meta http-equiv="X-UA-Compatible" content="IE=EmulateIE7" />
    <meta http-equiv="X-UA-Compatible" content="IE=EmulateIE8" />
    So I'm a little puzzled what to do....

  • How to call a page from an iview

    HI SDNs
    I have a requirement as follows .
    I need to call a page from an iview .  for that i developed a html and i gave the hyperlink to call the page.
    When i click on hyperlink it is calling page but iviews are not displayed. it is showing masterhead and DLN and but iviews are not shown
    Is there any soultion with out solution to display the iviews.  i Appreciate if you help at the earliest.
    Thanks
    Ramana

    Did you build your hyperlink using "NavigationTarget"?
    ex:
    http://myServer:50000/irj/portal?NavigationTarget=ROLES://portal_content/myFolder/myRole/myPage
    check the below link:
    http://help.sap.com/saphelp_nw04/helpdata/en/43/014421d21d6fade10000000a11466f/content.htm
    Greetings,
    Praveen Gudapati

  • Page Cannot display page

    Error : Cannot Display page
    You cannot complete this task because one of the following events caused a loss of page data
    possible causes:
    1.You have left your login session idle past the timeout period.
    2.A system failure has occured.
    3.The application server is incorrectly configured and does not send a session cookie to the client browser
    4.if you were testing in JDeveloper.
    1.Jdeveloper OC4J process did not fully shut down before restarting the application.
    2.you closed one of the internet expolrer windows while the request is being processed in another internet explorer window.closing an internet explorer window causes OC4J to expirre a user session.
    3.OC4J XML Files in your JDeveloper user home system directory have been modified or corrupted.
    Action :
    For the first two causes listed above ,please select the home link at the top of the application page to retun to the main menu.Then access this page again using the application's naviagtion controls (menu,links and so on) instead of using the browser's naviagtion controls like BAck and Forward.If you suspect
    that the application server is incorrectly configured .contact your system administrator.
    If you were testing in JDeveloper and suspect that you encountered one of the causes listed above,go to JDeveloper menu and select the option RUN|Terminate to terminate the OC4J process.Then re-run your application.If you still encounter this error,exit JDeveloper and remove the user home system directory .Then restart Jdeveloper and re-run your application.
    please help me
    Regards,
    Raji

    Raji,
    I believe we tried all possible solutions as shown in your other thread.
    I do not understand why you have not logged a SR until now!
    Page cannot display error for external user(via aproxy server)
    Re: Page cannot display error for external user(via aproxy server)
    Regards,
    Hussein

  • How to display iviews dynamically

    Hi all,
    I am making iView and attaching them to pages, however the iView is displayed with fixed size. Is there any option to display the height dynamically.
    Could you please send details or documentation on how to control the size of the iview within a page...
    your help is appreciated.
    dev

    Hi Devara,
    There is an option to control height of iview in page. Open the iView in property editor and in Appreance-size property category you will find property called height type change it to automatic.
    PS: IF helpful awards points
    --Deepak

  • RoboHelp10 - If we click on 'Show' link(button), blank page get displayed

    I am using,
    RoboHelp10
    IE9
    MSVS2010
    Win7
    Tried with below option,
    Flash Help -> we are working with it and has problem for our desktop/standalone wcf application.
    Flash Help Pro - > We know that RH server is req. for this option
    Web Help Pro- > We know that RH server is req. for this option
    Trouble in (Flash Help),
    1. When we invoke Flash Help with respective topic ID, it will not show requested topic page along with TOC, it will show default topic/page, which we set at the time creating help. Also it will display "Allow Blocked Content" button at the bottom. If we click on "Allow Blocked Content" it will display the above requested topic page correctly, but without TOC pane. This time we can see 'Show' button(link) on the browser. If we click on 'Show', blank page get displayed.
    2. When we are displaying content with option 'OptionConstants.CSH_DISPLAY_CONTEXT' it only show topic and it won't show me the TOC along with current selected topic page.
    3. When we are displaying content with option 'OptionConstants.CSH_DISPLAY_CONTEXT' it only show topic with 'Show' link. When we click on 'Show' link, blank page get display.
    4. Tool gives us facitlity to publish the Flash help, where we can choose the folder. This means that it publishes folder structure. We are using this folder structure (the published one) and on the top of that we are not getting expected(blank page get display) result.
    5. Published content does not contain any mapid/mapfile, if so whow it works correctly with RH development studio.
    6. Skin we were using 'beautiful_vista_flash.fhs'
    7. We build RH after setting Mozilla as the statup browser. We tried with Mozilla and IE but still our application opens help in IE. So not able to test in Mozilla.
    Please assist to resolve it.
    Thanks in advance.

    Thank you for your input.
    Working with "FlashHelp"
    Our req is files pages are deployed along with desktop(WPF) application locally and not on webserver.
    Referred following link,
    http://blogs.msdn.com/b/ieinternals/archive/2012/06/20/loading-local-files-in-enhanced-pro tected-mode-in-internet-explorer-10.aspx
    http://msdn.microsoft.com/en-us/library/ms537628%28v=vs.85%29.aspx
    and added below one liner code,
    <?xml version="1.0" encoding="utf-8" ?>
    <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
    <!-- saved from url=(0014)about:internet -->
    <html xmlns="http://www.w3.org/1999/xhtml">
    <head>
    in each pages in the 'ProjectManager''s Project Files. And published the content of "FlashHelp".
    Again the same problem("Allow Blocked Content" button apprears and blank page get displayed, as explained in option #1 of the first post) persist.
    If i choose page and do viewsource then it will show blank line in place of <!-- saved from url=(0014)about:internet -->
    Code is as given below,
    <?xml version="1.0" encoding="utf-8" ?>
    <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
    <html xmlns="http://www.w3.org/1999/xhtml">
    <head>
    We need to know that how to implement 'Mark of the Web' using RH development studio?
    Your input are appreciated.

Maybe you are looking for