Pages '09 Does Not Have "Sidecar" File?

I read somewhere that a difference between Pages '08 and '09 is that '09 no longer stores formatting data, etc. in a .xml "sidecar" file. Is this correct?
A couple of times I have had Pages '08 files that would not open because the file was no longer "viable" (or similar terminology...) and I assume that the problem was with the .xml file. (The problem may be related to an encryption program that I use.)

They were mostly in the early postings for '09, so do what I did go back to the older posts, I also searched on "packages".
A few I found:
http://discussions.apple.com/thread.jspa?threadID=1868842&tstart=300
http://discussions.apple.com/thread.jspa?threadID=1867325&tstart=345
http://discussions.apple.com/thread.jspa?threadID=1866132&tstart=360
http://discussions.apple.com/thread.jspa?messageID=8793268&#8793268
http://discussions.apple.com/thread.jspa?messageID=8854053&#8854053
http://discussions.apple.com/thread.jspa?messageID=8763471&#8763471
http://discussions.apple.com/thread.jspa?messageID=8829762&#8829762

Similar Messages

Upload document does not have correct file name

I have a procedure that uploads the file in the table with BLOB. We have a DAD entry on our application server as
<Location /pls/excess_admin_qa>
SetHandler pls_handler
Order allow,deny
Allow from All
AllowOverride None
PlsqlDatabaseConnectString 10.125.1.129:1521:sidq02 SIDFormat
PlsqlAuthenticationMode Basic
PlsqlDefaultPage eeq_main
PlsqlDocumentTablename eeq_documents
PlsqlDocumentProcedure eeq_attach_download
# PlsqlAlwaysDescribeProcedure Off
</Location>
and I have another table in my application to connect the table to other ID's.
It used ot work before, but noe it does not work. The file name should have prefix unique id like "F909307841/Blue hills.jpg", instead I get only C:/temp?Bluehills.jpg.
The table structure is
EEQ_DOCUMENTS
NAME VARCHAR2(128 BYTE),
MIME_TYPE VARCHAR2(128 BYTE),
DOC_SIZE NUMBER,
DAD_CHARSET VARCHAR2(128 BYTE),
LAST_UPDATED DATE,
CONTENT_TYPE VARCHAR2(128 BYTE),
CONTENT LONG RAW,
BLOB_CONTENT BLOB
What could have cause this?

yshah wrote:
It used ot work before, but noe it does not work. The file name should have prefix unique id like "F909307841/Blue hills.jpg", instead I get only C:/temp?Bluehills.jpg.
What could have cause this?What browser is being used?
For security/privacy reasons recent versions of browsers by default do not send local file path information from File Browse items to the server, nor expose the file path in the control's JavaScript methods. IE6 & IE7 still yield the path in Windows format. IE8+ adopted an irritating approach of replacing the path with a wholly imaginary "C:\fakepath\"—and this monstrosity has sadly had to be enshrined in the HTML5 spec so we're now saddled with this everywhere...
Changing IE's security config setting "Include local directory path when uploading files" enables the path to be exposed, which appears to be the most likely explanation for this.
For more information see:
http://lists.whatwg.org/htdig.cgi/whatwg-whatwg.org/2009-March/018980.html
http://blogs.msdn.com/ie/archive/2009/03/20/rtm-platform-changes.aspx
http://developers.whatwg.org/number-state.html#file-upload-state

Saved project from migration does not have video files? Will manually reloacting each video keep the editing intact on the project?

I had a computer crash but was able to manually drag over and save all my imovie projects. The corresponding videos did not transfer over during the migration. I have had to manually go in and re-import each of the video clips. Will the manually reimported clips automatically replace the missing files and keep the edits intact?
So for example, a missing file in the project has the first 5 seconds clipped off and some image stabilization. The project says I need to reimport the original source media (File X). I import File X so it is now in the library. Will imovie now recognize File X as the source media and automatically plug it in, complete with the cropped 5 seconds and image stabilization? If it is not automatic, is there a process I need to complete to accomplish this?
Thankyou very much for the help.

If you attempt to start a new project and import one of those files does it allow you to simply import them?

Oilpaint filter the only one that does not have .pbk file

hello,
i just learned about pixel bender and installed it in photo shop. i also copied the "pixel bender files" folder into plugins/effects directory for after effects to try them out there.
i really liked playing with the OILPAINT filter in photoshop, but when i looked for it in AE i realized something weird... there is no .pbk file for OILPAINT like there is for all the other filters. - so, it doesn't seem i can use it in ae...
does anybody know why this is? or how to work around it?
thanks
max

The oilpaint filter is currently proprietary to Adobe which is why there's no PBK file for it. If you'd like to see it in After Effects you can make a request on the AE forums.

How do i re-size a web page to fit my monitor screen. The view/zoom option only works page by page and does not have a save option I can find.

viewing web page

Try using the Default FullZoom Level extension to set a default zoom level in Firefox:
https://addons.mozilla.org/en-US/firefox/addon/6965

My ipad2 settings menu does not have an update software listed. I'm trying to update to ios5

My ipad2 settings page menu does not have an 'update software' on it. How do I update to ios5?

The update to iOS 5 is a lengthy process. Your entire device is being backed up, then wiped, then the new OS is installed, then your apps, etc., rebuilt on the device. If you have a lot apps, etc., on your device it will take a long time to update.

How can I convert my Open Source document files into Word document files? I cannot download Pages since my Macbook Air does not have the most recent software.

How can I convert my Open Source document files into Word document files? I cannot download Pages since my Macbook Air does not have the most recent software. I downloaded open office to my mac to try and save money. It worked well for a while. Now I get this pop-up message that asks me to "Reopen" and when I select the option, nothing happens. I cannot save my documents anymore and I cannot convert them to word. Help!

dwb wrote:
Does OpenOffice output Word documents by default or do you have to select it manually?
You have 17 options to save as in Open Office, one of which is .doc files, yes it needs to be saved manually.
You may be able to default to DOC, but have not tried same.
Since Open Office is 99% same as Word, I use it, or Word, either one. Open Office is a bit less buggy than Word 11'

I'm applying for jobs online through my iPad using the safari app. For some reason when I try to attach my resume, which I have saved in Pages, it does not give me an option to go to Pages. It only gives my an option to choose a file from photos. Does it

I’m applying for jobs online through my iPad using the safari app. For
some reason when I try to attach my resume, which I have saved in
Pages, it does not give me an option to go to Pages. It only gives
my an option to choose a file from photos. Does it not have the
capability to choose a location other than photos??

No. Safari does not have the option to attach files for uploading other than photos.
Look at iCab Mobile in the App Store. There are other browsers that may do this, but I'm pretty sure that iCab will fill the need.
iCab Mobile (Web Browser) on the App Store on iTunes
take a look at this.
http://www.icab-mobile.de/faq.html

Please help!! Pages 09 :: Pages Files Can not be read - The Document Does Not Have A Valid Format

I used pages to write my coursework, but when I saved it, pages crashed...
Now I tried to reopen the file. It shows "The document ___.pages can not be read - The Document Does Not Have A Valid Format".
I've looked through the forum to find any fix methond. I tried the "zip solution" -> changes the file entention as .zip file.
But the still can not solve my problem. it shows the zip file can not be open..
I put my files in the following link.
http://dl.dropbox.com/u/16476040/Marketing%20Coursework.pages
Please could anyone try to offer me assistance. bacause it is very urgent.
I will be very grateful if anyone can help me.

Hi, Peter
I followed the instriction, and changed to root to locate /.DocumentRevisions-V100/
I can see several ______.pages file under the ./DocumentRevisions-V100/PerUID/
From the "Date Modified" attribute, I can find several __.Pages files that what I want.
But unfortunately, when I tried to open these version files, it still shows
The document can not be read. The Document does not have a valid format....

Pages document "could not be read" bc. it "does not have a valid format"

The document in question was properly saved and Pages was not open when my computer hung as it was shutting down. MS Word would not quit or force-quit and I had to hard restart the computer. When I later tried to open this Pages document, which I had been working on before Word froze, Page would not open it and responded with the error message: "This document "document_name.pages" could not be read. This document does not have a valid format." When I looked at the document in question I noticed that its file size was 0KB. I have no idea why this happened, but I suppose it has to do with my computer not shutting down properly and perhaps with Word freezing. If I repair my drive permission, re-index it, anything, will it help? Just a note on the status of this machine: spotlight stopped working earlier this morning and I was waiting to finish this document before repairing disk permissions and trying to fix that issue with Spotlight.
In the meantime I have tried various fixes. First I tried to change the file ending to .zip, unpack it and open it. Then the same, but this time I tried to view package contents. It doesn't show up in the contextual menu as even having a package to show the contents of. The file is effectively empty, but I don't know where the contents went! The funny thing is that the MS Word doc was recovered automatically. Is it possible that Pages doesn't have an auto-recovery mechanism?
I need this file urgently, or at least the text in it. It is the bibliography of an important paper due tomorrow at 5 pm.Any advice or suggestions would be greatly appreciated.
BTW, I have used a file-recovery program in the past. It is called "Stellar Phoenix" and it worked wonderfully to find a Word doc that I accidentally deleted. It can't find .pages document though. In order to do so, I would need to tell the program what the average file size is, as well as the header information as follows. "Header (in hexadecimal)" "At Offset (in decimal)". I have no idea what this means, but if I could insert it, perhaps it could find the lost data. Should I have it search for .pages, .zip, .xml? I'm at a loss, but I know that it doesn't recognize .pages. In the meantime, I sent a support email to them and will see what happens.
Thank you for your help.
David

I can't respond before.
When the system say that your file size is 0KB, it means that nothing was saved. Only a file descripto exists.
So, there is nothing to recover.
Given the time the system crashed, you may have :
(1) a simple descriptor with nothing written
(2) a folder with every or only some of the required files.
In this case, Phoenix is useless : it's unable to revive a folder.
(3) a flatfile (a compressed version of the folder named above). It's only this kind of file which Phoenix may revive.
With a bit of luck, Phoenix would be able to revive the index.xml file which was in the original folder created in the temporary folder.
This file starts with :
<?xml version="1.0"?><sl:document xmlns:sfa="http://developer.apple.com/namespaces/sfa"
or
<?xml version="1.0"?>
<sl:document xmlns:sfa="http://developer.apple.com/namespaces/sfa"
The minimal size for a Pages index.xml file is : 520038 bytes.
If you retrieve the index.xml file, we may try to rebuild an usable package.
Ask the recovery tool to transfer the recovered file on an other media.
If the document embedded pictures, the index will give their path and their size which may be useful to recover them.
Yvan KOENIG (VALLAURIS, France) lundi 1 novembre 2010 10:27:44

This file does not have a program associated with it...

Ok, I'm not awesome at technological troubleshooting, so if someone could help me, I would be grateful because I'm getting frustrated.
I'm trying to play a silly little game online and it's telling me I need Shockwave. I know I have it because I've played this game before (something time-wasting on addictinggames.com) and I found a file called Shockwave 11 in C:\\WINDOWS\system32\Adobe\Shockwave 11 with all sorts of things in it.
I checked my Add/Remove Programs list and it says I have Adobe Shockwave 11.5 and that it is used rarely.
Since there seems to be a glitch here that I don't understand, I went to the Download Shockwave page on this site and tried to download the latest version or whatever, if that would work. The gray progress bar moves across under the "Adobe Shockwave Player is now installing" line and then I get an error popup that says:
"This file does not have a program associated with it for performing this action. Create an association in the Folder Options control panel."
What am I supposed to do? What does this mean? What file? Huh??
I am running Internet Explorer 7 and have Windows XP.
I am a total noob and need to be spoken to like a child. Can anyone please help me?

I clicked on your link (thank you - where did you get that?) and installed the Full version, apparently successfully, though during the download there were a couple of components that were troublesome.
The error message I got during setup read: "Error opening file for writing: C:\WINDOWS\system32\Adobe\Director\SWDNLD.EXE Click Abort to stop the installation, Retry to try again, or Ignore the skip this file." Retry did not work, despite having clicked it 10s of times. I clicked Ignore, then got the same message again, but about a different file: C:\WINDOWS\system32\Adobe\Director\SwDir.dll Clicking Retry again did not help move things along, so I ignored this one too. What does this problem indicate? Do I need to do something here?
Those are the only errors encountered during setup. I declined the Google toolbar. The dialog box says Successfully Completed; I clicked Close.
So I go to try to play this game as a test and it says "Installing Shockwave Components" and then I get the same error popup telling me that this file does not have a program associated with it for performing this action and that I need to create an association in the Folder Options control panel!
What does this mean and how do I do it, since it appears to be critical to getting this thing to work...?

'This file does not have a program associated with it for perfoming this action'?

'This file does not have a program associated with it for perfoming this action. Please install a program or, if one is already installed, create an association in the Default Programs control panel". Any help? This error message has never come up before. I have tried to open the page on 3 different devices but the same error message. All help is greatly appreciated as I need to print the page out for my course I am doing. Thanks all.

You get this when doing what? Can you post a link to the page that gives you this message?

Since I have Yosemite on my iMac I can't view PDF files in Safari anymore. It keeps telling me to upgrade my Adobe Reader, but it is the latest version. Please help? I don't have this problem on my Macbook that does not have Yosemite installed.

Since I have Yosemite on my iMac I can't view PDF files in Safari anymore. It keeps telling me to upgrade my Adobe Reader, but it is the latest version. Please help? I don't have this problem on my Macbook that does not have Yosemite installed.

Back up all data before making any changes. Please take each of the following steps until the problem is resolved.
Step 1
If Adobe Reader or Acrobat is installed, and the problem is just that you can't print or save PDF's displayed in Safari, you may be able to do so by moving the cursor to the the bottom edge of the page, somewhere near the middle. A black toolbar should appear under the cursor. Click the printer or disk icon.
Step 2
There should be a setting in its preferences of the Adobe application such as Display PDF in Browser. I don't use those applications myself, so I can't be more precise. Deselect that setting, if it's selected.
Step 3
If you get a message such as ""Adobe Reader blocked for this website," then from the Safari menu bar, select
          Safari ▹ Preferences... ▹ Security
and check the box marked
          Allow Plug-ins
Then click
          Manage Website Settings...
and make any required changes to the security settings for the Adobe PDF plugin.
Step 4
Triple-click anywhere in the line of text below on this page to select it, the copy the selected text to the Clipboard by pressing the key combination command-C:
/Library/Internet Plug-ins
In the Finder, select
          Go ▹ Go to Folder
from the menu bar, or press the key combination shift-command-G. Paste into the text box that opens by pressing command-V, then press return.
From the folder that opens, move to the Trash any items that have "Adobe" or “PDF” in the name. You may be prompted for your login password. Then quit and relaunch Safari.
Step 5
The "Silverlight" web plugin distributed by Microsoft can interfere with PDF display in Safari, so you may need to remove it, if it's present. The same goes for a plugin called "iGetter," and perhaps others—I don't have a complete list. Don't remove Silverlight if you use the "Netflix" video-streaming service.
Step 6
Do as in Step 4 with this line:
~/Library/Internet Plug-ins
If you don’t like the results of this procedure, restore the items from the backup you made before you started. Relaunch Safari.

Cannot find anyplace to tell a page to wrap within browser margins, so one does not have to slide it back and forth to read each line.

Cannot find anyplace to tell a page to wrap within browser margins, so one does not have to slide it back and forth to read each line::::::::::::
Yes, there are so many pages on-line that -- when made small enough to fit within the margins so one does no have to use a scroll bar on EVERY line, moving it back and forth, back and forth -- look like a FINE-print Bible page (!! tiny !!) if you keep reducing it to fit within the margins.
ALL because we cannot find a place to tell it to WRAP to FIT. Could have sworn I've seen some feature like that somewhere at one time, but if it is here, I cannot find it.
Thank you.
gina

Maybe use a style.
Add code to userContent.css
* http://kb.mozillazine.org/userContent.css
<pre><nowiki>body, body *{ white-space:pre-wrap!important; word-wrap:break-word; }
</nowiki></pre>
You can use the ChromEdit Plus or Stylish extension to have easier access to the customization files.
* ChromEdit Plus: http://webdesigns.ms11.net/chromeditp.html
* http://kb.mozillazine.org/Editing_configuration

VS2013 Page Inspector does not use external script files

If I use an external javascript file, the Page Inspector does not appear to run the javascript (as the styles created during runtime are not visible). If I run the web page outside of VS (e.g. IE) then it works.
<script type="text/javascript" src="border.js"></script>
However, if I use an internal script, the styles are created as expected.
<script type="text/javascript">$("div").css("border", "2px solid red").add("p").css("background", "yellow");</script>
Is the Page Inspector supposed to use external script files, and if not, are there plans to support it?

Hi,
Thank you for your post.
I am afraid that the issue is out of support range of VS General Question forum which mainly discusses
the usage of Visual Studio IDE such as WPF & SL designer, Visual Studio Guidance Automation Toolkit, Developer Documentation and Help System
and Visual Studio Editor.
Because Page Inspector feature is more related to ASP.NET Application/Technology, in order to resolve your issue better,
I suggest that you can consult your issue on ASP.NET forum:
http://forums.asp.net/ for better solution and support.
Best regards,
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

Pages '09 Does Not Have "Sidecar" File?

Similar Messages

Maybe you are looking for