Pages formatting

Is there a way to totally remove the header and footer so my top and bottom margins can be less than .50?

Yes. Use the document inspector & reduce the header & footer to zero & then uncheck them.

Similar Messages

  • Creating Page Format In Quality

    I want to create a new page format, for the purpose I did the following...
    spad-> Full Administration-> Device Types-> Page Format-> Change-> Create-> (Page Format=ZA4, Orientation=Landscape, Paper Size (Width=215 mm, Height=300 mm))
    When I click on save, a pop window opens and shows the massage Object can only be created in SAP package
    Pressing enter it asks Package under attributes
    What to select in Package is my problem? Please help....
    Lalit Kumar

    On the save Option Select Local object or Enter $TMP in the package field.
    it is not working:
    *Create a package in SE80.
    And enter the package name.*
    Can you please  provide me the steps to create package??
    Lalit Kumar

  • Page Format different than doc

    I have converted a pdf file to a word doc so I can insert into my document but the margins are different and the form is being cut off when I insert.  I cannot change the margins on my document do to the large content. How can I get it to fit?

    Hello Peter,
    All our projects reside on a shared network drive. We both
    have access to them. When I say "my PC" or "my partner's PC", I
    mean that the project is open on my or my partner's PC. But it is
    the same project, not a copy of the project.
    We tried your suggestion, and both projects generated letter
    size documents on my side, and A4 documents on her side.
    Since my original post, we have reinstalled RH as suggested
    on a different message board. This did not solve this problem. We
    have checked and installed update files from the Adobe site - no
    change. We've even had our techies poke around, but they couldn't
    come up with anything.
    Our only working solution so far is to generate the Word
    document and change the page format manually. Which doesn't sound
    too bad, except that 2 of our projects each require 17 different
    pdf files - so it makes for a lot of manual attention as opposed to
    a simple "Batch Generate".
    As I wrote in my first post, I'm not sure if this is a RH
    issue, so I really appreciate any help you can provide.
    Thanks
    Ben

  • How to set Page Format in adobe form

    Hi,
    I am designing a simple print forn using Adobe, since printer is dotmatrix page break should be triggered longer then usual A4 size.
    If I do the same thing using Smartfom I will define a page format and under output type of the smartform I will assign it, this is enough to tell the system what is the length and width of the page I am using for printing.
    how can we achive this in adobe form.
    Regards
    Bikas

    Hello,
    go to your master page and change the master page/page format/size as you wish.
    Otto

  • "Output could not be issued" when using custom page formats

    Dear all,
    I created a custom page format using SPAD. Its dimension is 7.5cm x 10cm (190mm x 254mm). I also created this page format in windows and set as the default paper size in my printer. However, when trying to print a smartform using this size, the message "Output could not be issued" is given. When I use the standard paper sizes (e.g., LETTER, DINA4), the form prints OK.
    Can you point me to the direction to solving this?
    Thank you!
    Kyle

    Issue resoved.
    For those who are encountering the same problem, here's what I did. I tested the smartform by itself and it reported the specific error: the page format is not supported in device type SWIN. I added it in another device type SAPWIN. This was just a simple miscommunication between the admins and the developer. I added the format in SWIN and everything works fine.
    Kyle

  • New Page Format in Smartforms

    Hi All,
    I am working on smartforms.
    I have created a new page format of width 25 cm and width 30cm according to client's requirement.
    Smartform is  for customer invoice which is a pre-printed and i have to get data into that.
    In sform i have given the my own page format name.
    Now problem is am getting print preview correctly but while giving print its givivng the error
    ' OUTPUT COULD NOT BE ISSUED' and print is not coming.
    Please help me regarding this issue.
      Thanks in advance.
    Regards,
    Murthy.

    Hi,
    I have checked it but its ok.
    I have created page format through SPAD only.
    Regards,
    Murthy.

  • Creation of new page format

    Hi
    I have created new page format and added it to format and then to device by using SPAD.
    This new page size is 8 X 6 Portrait( Is there any standard sap page format available with this size)
    the problem is that when print out is taken by using script the first page of the first document is correctly printed , But from second document onward the printer scrolls more than required, the print out is taken in continues page.
    Where to set the scrolling space and all
    Hoping help

    I think it is Printer problem. Check your printer settings.

  • How do I switch from 1 page format to 2 page format? ibooks won't let me switch back to 2 page after I clicked on 1 page format.

    I had clicked on 1 page format on one of the books I have in my library. Since doing this, it won't allow me to click back to 2 page format. Under the view tab, when i scroll down to that area, 1 page is in black with a check mark next to it, and 2 page format is in gray which usually indicates that this sinot an option. I tried removing the check next to 1 page format, but it doesn't seem to help. I would appreciate feedback on resolving this.

    Adobe Education... Start here https://creative.adobe.com/join/edu
    Education Plan https://creative.adobe.com/plans?plan=edu
    When you buy an Education subscription, the terms you "click to agree" should be clear about the first/later years
    -One Year Intro Price http://forums.adobe.com/thread/1448933?tstart=0
    http://www.adobe.com/products/creativecloud/students.edu.html
    http://www.adobe.com/education/students/student-eligibility-guide.edu.html
    Redemption Code https://creative.adobe.com/educard
    ID Proof http://www.adobe.com/store/au_edu/academic_id.html

  • Save as PDF Page Formatting

    Hi All,
    I built a tool in Excel 2007 which allows the user to publish a formatted output to PDF.  To get around the fact that the excel pulls the printer metrics from the active printer, I had the tool load up the MODI printer and use its metrics so I always
    had a consistent borderless printer driver source across all users and all was well.
    I have a problem on the horizon though, my work is moving their OS across to 64bit Windows 7 and the MODI does not run on 64bit.
    Is there a way to manually define the printer metrics and force excel 2007 to use those as a pass through when creating a PDF, alternatively can I just tell it to ignore the active printer like you can in word?
    Failing that Is there a better fixed page formatting method in either Excel 2010 or 2013?

    Hi,
    Do you mean that you built a tool to load up the MODI printer and use its metrics, but the the MODI does not run on 64bit, so you want to manually define the printer metrics?
    Since You said you want to manually define the printer metrics and I think the issue is more related to the feature of Excel, I'd like to move it to Excel IT pro forum.
    The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us.
    Thanks for your understanding.
    We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
    Click
    HERE to participate the survey.

  • Footer should be print on last page in multiple page format

    Hi expert,
    I designed form for invoice print ,in that for multiple pages footer should be print on last page only and hight of the main window should be increase (means if footer will display on last page then space of footer should be used for main window in multiple
    page format) 
    for eg .if i have 12 item so 5 items displyed on each page but i want to print 10 item on first page and remaing on second and after that i want to print footer.
    Regards,
    Jyotsna

    Hi,
    Has you tried to create a "new page" copy of FIRST, and make it the LAST_PAGE... On it you are going to create the desired footer.
    The Page Secuence will be something like this:
    If you are trying to print 12 items, then PAGE 1 (10 items) -> LAST_PAGE (2 remaining items).
    Hope it helps you...
    Alexis Sanchez N.
    SAP ABAP Development Consultant
    Molen Services and Consulting, C.A.

  • Different page formats in the same document

    Is it at all possible to create an InDesign-document with different page formats? Example: Page 1: 210x297 mm, page 2: 190x297 mm.

    only by using this:
    http://www.dtptools.com/product.asp?id=pcid
    robin
    www.adobescripts.com

  • How do you change the page format to print a larger area?

    Hi there, another new to mac and new to numbers guy.
    I'm trying to find the windows equivalent to change page format.
    I want to reduce the blank border surrounding my table and print a larger area. How do you reduce the blank border that prevents you from printing up to the paper edge?
    cheers

    Page margns in Numbers are set in the Layout Inspector.
    Open the Inspector and click the Layout button.
    Edit the four margin settings as you wish. Reduce the (page) header and footer settings to zero if you don't want to include running headers or footers on your pages.
    Note that margins will be limited by the capabilities/settings of your printer. Printing to the edges of the paper usually requires a choice to be made in the Print dialogue as well as for the document itself.
    Regards,
    Barry

  • Page formats in script its Urgent

    Hello all,
    I have created one page format through SPAD.. but its getting error :You have selected a page format YPO_PF for which there is no identical formatting type in the spool.
    and i saved with same request no but while i was moving it to testing through scc1 i am getting error
    please guide me to create page format....?
    thanks
    regards
    aeda
    Edited by: Aeda N on Mar 10, 2008 12:21 PM

    Hi,
    Although I have never done this before, but I hope the below link from SAP help site may help you.
    http://help.sap.com/saphelp_nw70/helpdata/en/d9/4a959551ea11d189570000e829fbbd/content.htm
    Regards,
    Mayank

  • Page Format Creation in SAP

    Hi Friend...
    How to create a Customized Page Format in SAP.
    Actually i am working on a pre-printed stationary and it is Dot Matrix Printer.
    The dimensions are 40 width 20 height.
    I think there is no similar page format in SAP
    So please help me how to create a Page Format in SAP
    Regards:
    Sridhar

    Hi,
    Please follow this link for detailed description on creating a custom page format,
    [http://www.****************/Tutorials/Smartforms/PageFormatSS/Create.htm]
    Edited by: avinash ravipati on Jul 25, 2008 9:44 AM

  • Multiple page formats in smartforms

    we say that multiple page format is possible in smartforms but not in SAP Script. What does this multiple page format exactly means and whar does label means exactly in smartforms.
    Please help.

    multiple page formats in smart forms means...
    the first can be landscape, and the second one portrait...viveversa is also possible
    label means... for example u want to print addresses of employees in an organisation... then through scripts ypu can print the labels...

  • CREATE EDITION CLASS FOR PAGE FORMAT

    Hi,
    I have a sales form in SapScript, for which I created a page format "ZFCONT" in continuous form (305 mm. x 225mm.).
    Now the system needs to create a "editing class" to associate the new page format (ZFCONT).
    What are the steps to create the "editing class".
    There is another necessary step to enable it to print?
    Thank you very much for your help.
    Fabio Rodriguez
    by Argentina

    Well, this should be a system problem (refresh) because the day after, without any change in SPAD nor anyplace else, the smartforms is recognizing the page type I've created.
    Thanks anyway.
    Regards,
    Valter Oliveira.

Maybe you are looking for