Paging file error!

we have dev and qal on one server , we are unable to start dev and
qal simultaneously the error I am getting is the paging file. I have
increase the virtual memory but tht doesn't work.
logs
ES initialized.
ERROR => [CreateOsShm] CreateFileMapping(62,83926 KB) failed with
Err=1455
ERROR_COMMITMENT_LIMIT: The paging file is too small for
this operation to complete. [shmnt.c 2174]
ERROR => ShmCreate: Create (62,85940720,1) failed [shmnt.c
506]
the observation I have made is the dev is started and its working fine
the PF usage is 7.17GB when I am starting the qal server its the PF
usage reaches till 11.6GB and dispatcher get stopped. The Limit of the
commit charge is 11632572.
can any one help?

Hi,
Can you provide what is the physical memory and the page file size allocated with OS,DB and SAP versions and is it single stack or dual stack ?
Regards,
Laxman

Similar Messages

Windows no longer boots up, paging file error

I just reinstalled windows on my mac last week because until now I had been running the old beta version of boot camp.
Just a few days ago I started getting blue screens every so often and it happened again (twice to be exact) yesterday, however one of the times it booted up and informed me I might want to change my paging file size. Not quite sure what this was I went and found the paging file option in settings and found it was clicked on a set size...so I figured I'd set it on the option that lets windows decide for me hoping this would fix the blue screen problem.
I shut down my computer later that night and now windows won't get to the desktop.
When I start it up normally it runs the system check (which I cannot skip for some reason) which gets to 84% and then says \windows\Dump3865.tmp is cross-linked on allocation unit 1731772
Above it it mentions there is an invalid size for my page file.
I tried booting it up the in safe mode multiple times and every time it generates a list in dos and stops on windows\system32\Drivers\mup.sys
I really don't want to have to reload windows again. Is there anyway to skip the system check (it says press anykey, but that has never worked for me) or any other way to get my paging files back to the way they were?
Thank you.
Oh I'm running leopard with windows XP professional on a macbook pro (last years model) if that helps in anyway.
Message was edited by: Tommmmm

A. run chkdsk
B. What happens if you boot from XP CD and Repair System
C. system file checker - from command "sfc /scannow"
http://www.informationweek.com/news/windows/showArticle.jhtml?articleID=18530125 1
http://windowshelp.microsoft.com/Windows/en-US/Help/f768809f-ed90-415f-a83f-89b4 2108b3551033.mspx

Error NOSSO 1.0 paging file

I received the following error when trying to download Adobe Reader 8.1 for my Windows XP:
NOSSO 1.0
the paging file is too small for this operation to complete.
I tried to print a few documents, and it said it couldn't find the printer-wanted to know if it was on...
help...!
Kate

You have run out of memory (RAM) and your disk has filled up.
Probably. You need to at least free a gigabyte or two on your C drive.
Aandi Inston

Paging file is too small for this operation to complete.

iTunes wont open. When I click on it, all it says is 'Paging file is too small for this operation to complete. Please help =)

Now it says Aplication Error - The aplication failed to initialize properly (0xc000012d)

A significant portion of the database buffer cache has been written out to the system paging file.

Hi,
We seem to get this error through SCOM every couple of weeks. It doesn't correlate with the AV updates, so I'm not sure what's eating up the memory. The server has been patched to the latest roll up and service pack. The mailbox servers
have been provisioned sufficiently with more than enough memory. Currently they just slow down until the databases activate on another mailbox server.
A significant portion of the database buffer cache has been written out to the system paging file.
Any ideas?

I've seen this with properly sized servers with very little Exchange load running. It could be a number of different things. Here are some items to check:
Confirm that the server hardware has the latest BIOS, drivers, firmware, etc
Confirm that the Windows OS is running the recommended hotfixes. Here is an older post that might still apply to you
http://blogs.technet.com/b/dblanch/archive/2012/02/27/a-few-hotfixes-to-consider.aspx
http://support.microsoft.com/kb/2699780/en-us
Setup a perfmon to capture data from the server. Look for disk performance, excessive paging, CPU/Processor spikes, and more. Use the PAL tool to collect and analyze the perf data -
http://pal.codeplex.com/
Include looking for other applications or processes that might be consuming system resources (AV, Backup, security, etc)
Be sure that the disk are properly aligned -
http://blogs.technet.com/b/mikelag/archive/2011/02/09/how-fragmentation-on-incorrectly-formatted-ntfs-volumes-affects-exchange.aspx
Check that the network is properly configured for Exchange server. You might be surprise how the network config can cause perf & scom alerts.
Make sure that you did not (improperly) statically set msExchESEParamCacheSizeMax and msExchESEParamCacheSizeMin attributes in Active Directory -
http://technet.microsoft.com/en-us/library/ee832793(v=exchg.141).aspx
Be sure that hyperthreading is NOT enabled -
http://technet.microsoft.com/en-us/library/dd346699(v=exchg.141).aspx#Hyper
Check that there are no hardware issues on the server (RAM, CPU, etc). You might need to run some vendor specific utilities/tools to validate.
Proper paging file configuration should be considered for Exchange servers. You can use the perfmon to see just how much paging is occurring.
These will usually lead you in the right direction. Good Luck!

SCOM reports "A significant portion of the database buffer cache has been written out to the system paging file. This may result in severe performance degradation"

This was discussed here, with no resolution
http://social.technet.microsoft.com/Forums/en-US/exchange2010/thread/bb073c59-b88f-471b-a209-d7b5d9e5aa28?prof=required
I have the same issue. This is a single-purpose physical mailbox server with 320 users and 72GB of RAM. That should be plenty. I've checked and there are no manual settings for the database cache. There are no other problems with
the server, nothing reported in the logs, except for the aforementioned error (see below).
The server is sluggish. A reboot will clear up the problem temporarily. The only processes using any significant amount of memory are store.exe (using 53GB), regsvc (using 5) and W3 and Monitoringhost.exe using 1 GB each. Does anyone have
any ideas on this?
Warning ESE Event ID 906.
Information Store (1497076) A significant portion of the database buffer cache has been written out to the system paging file. This may result in severe performance degradation. See help link for complete details of possible causes. Resident cache
has fallen by 213107 buffers (or 11%) in the last 207168 seconds. Current Total Percent Resident: 79% (1574197 of 1969409 buffers)

Brian,
We had this event log entry as well which SCOM picked up on, and 10 seconds before it the Forefront Protection 2010 for Exchange updated all of its engines.
We are running Exchange 2010 SP2 RU3 with no file system antivirus (the boxes are restricted and have UAC turned on as mitigations). We are running the servers primarily as Hub Transport servers with 16GB of RAM, but they do have the mailbox role installed
for the sole purpose of serving as our public folder servers.
So we theroized the STORE process was just grabbing a ton of RAM, and occasionally it was told to dump the memory so the other processes could grab some - thus generating the alert. Up until last night we thought nothing of it, but ~25 seconds after the
cache flush to paging file, we got the following alert:
Log Name:      Application
Source:        MSExchangeTransport
Date:          8/2/2012 2:08:14 AM
Event ID:      17012
Task Category: Storage
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      HTS1.company.com
Description:
Transport Mail Database: The database could not allocate memory. Please close some applications to make sure you have enough memory for Exchange Server. The exception is Microsoft.Exchange.Isam.IsamOutOfMemoryException: Out of Memory (-1011)
   at Microsoft.Exchange.Isam.JetInterop.CallW(Int32 errFn)
   at Microsoft.Exchange.Isam.JetInterop.MJetOpenDatabase(MJET_SESID sesid, String file, String connect, MJET_GRBIT grbit, MJET_WRN& wrn)
   at Microsoft.Exchange.Isam.JetInterop.MJetOpenDatabase(MJET_SESID sesid, String file, MJET_GRBIT grbit)
   at Microsoft.Exchange.Isam.JetInterop.MJetOpenDatabase(MJET_SESID sesid, String file)
   at Microsoft.Exchange.Isam.Interop.MJetOpenDatabase(MJET_SESID sesid, String file)
   at Microsoft.Exchange.Transport.Storage.DataConnection..ctor(MJET_INSTANCE instance, DataSource source).
Followed by:
Log Name:      Application
Source:        MSExchangeTransport
Date:          8/2/2012 2:08:15 AM
Event ID:      17106
Task Category: Storage
Level:         Information
Keywords:      Classic
User:          N/A
Computer:      HTS1.company.com
Description:
Transport Mail Database: MSExchangeTransport has detected a critical storage error, updated the registry key (SOFTWARE\Microsoft\ExchangeServer\v14\Transport\QueueDatabase) and as a result, will attempt self-healing after process restart.
Log Name:      Application
Source:        MSExchangeTransport
Date:          8/2/2012 2:13:50 AM
Event ID:      17102
Task Category: Storage
Level:         Warning
Keywords:      Classic
User:          N/A
Computer:      HTS1.company.com
Description:
Transport Mail Database: MSExchangeTransport has detected a critical storage error and has taken an automated recovery action. This recovery action will not be repeated until the target folders are renamed or deleted. Directory path:E:\EXCHSRVR\TransportRoles\Data\Queue
is moved to directory path:E:\EXCHSRVR\TransportRoles\Data\Queue\Queue.old.
So it seems as if the Forefront Protection 2010 for Exchange inadvertently trigger the cache flush which didn't appear to happen quick or thuroughly enough for the transport service to do what it needed to do, so it freaked out and performed the subsequent
actions.
Do you have any ideas on how to prevent this 906 warning, which cascaded into a transport service outage?
Thanks!

Intermittent 'Unable to read file' error when exporting/opening .html to .xls

Hi, hope someone can help.
I have an issue where I export a report from the Salesform platform to Excel. The file that is being exported is in html format and the report does not include any Pivot tables.
The 'Unable to read file' error occurs intermittently, when Excel is already open and you export/open it from Salesforce...
Have tried using Excel in safe mode with all the add-ins disabled and still no joy. The
Do not save encrypted paged to disk option has been un-ticked the in Internet Options -> advanced.
The issue happens in IE and other browsers, after raising the issue with Salesforce support they advised to raise the issue with MS instead, so here I am to see if anyone can help!
Any help would be much appreciated

Tools>Internet Options>Advanced tab, uncheck "Do not save encrypted files to disk"
check your GPO settings to see if you have configured this to be unchecked.
Thx.
Rob^_^

Host Agent Service critical - Paging file is too small for this operation to complete

Hi all,
at the moment I have the problem that some of my hosts get in the errorstate critical in VMM 2012 SP1.
The error details in VMM are:
Error (2912)
An internal error has occurred trying to contact the hostname server: : .
WinRM: URL: [http://hostname:5985], Verb: [ENUMERATE], Resource: [http://schemas.microsoft.com/wbem/wsman/1/wmi/root/cimv2/Win32_Service], Filter: [select * from Win32_Service where Name="scvmmagent"]
The paging file is too small for this operation to complete (0x800705AF)
Recommended Action
Check that WS-Management service is installed and running on server hostname. For more information use the command "winrm helpmsg hresult". If hostname is a host/library/update server or a PXE server role then ensure that VMM agent is installed
and running.
On the host i cannot connect to FailoverCluster or Hyper.V Manager. After a restart of the host the Problem is gone and the System is working without any Problems for some days.
The paging file is set to 4GB and the OS is Server 2012.
The hosts have 192GB of RAM.
The configuration of the pagfile didn't change from Windows 2k8R2 to 2012.
I didn't find any Errors in the eventlog. Do you have any idea where to check for that?
Thanks,
Patrick

The hotfix didn't solve the Problem for me either. The WMI crash came again after a couple of weeks.
An additional problem with VDS was detected and the following hotfix was installed:
http://support.microsoft.com/kb/2884597/en-us
Also a problem with Clusterservice was found, sadly MS is tagging this handle leak as "won't fix".
Nevertheless one WMI Instance is still growing...
We are testing a hotfix that so far looks promising. Its a private hotfix only right now. But the file is listed as KB494704 you may want to ask your support engineer to look into it.

Paging file problem in Windows7/HP Memories disc

I found that the HP Memories disc causes an inability to set a paging file in Windows 7. An error messge appears every time on start up. I was advised by Lenovo to re-install Windows 7 but that does not cure the problem. Only not using the HP disc did so.

Ok, well, I called the tech support here in athens greece, and what did the guy told me? that I have to get the recovery cds as long as I deleted the recovery partition and did not make any recover y cd before deleting it. Fair enough I told him, I can understand this, but, I told, are you sure I am going to be able to actually install an os on this computer, cause I've already tried to install windows vista home premium, but the same thing happens, it return the same error as with windows 7 and xp! He said, yes, you're going to succeed, so I told him, ok, that means that there must be some kind of block inside the computer, most probably inside the bios, that prevents the installation of anything except the exact copy of the os that was preinstalled, and he didn't know exactly what to tell me, but more or less he told me yes, there is! Is that right, could the bios be blocking the installation of any other os? I can see in the bios that it says "preinstalled os: vista" something I've never seen in any other computer, but, can they do it? And why is this guy so sure the problem is that I was not using the recovery cds with the pre installed version of the os, couldn't be a cd/dvd drive problem? I have to pay for those recovery cds, what if it gives the same problem with those too?
Also I wanted to ask if someone knows how to make a bootable cd with the bios update, I mean which files should I extract from the exe, where and with what do I have to put them, etc., if someone coud please help me at least updating the bios, I could try installing the os from a usb key, so that I could tell for sure if it's a problem of the dvd drive.
Thanks.

Page File error when trying to install AD Managed Service Account

Hello everyone,
I am having a bit of an issue with Managed Service Accounts in that when I am trying to perform the install of a single computer restricted Managed Service Account I am getting the error of "{Not Enough Quota} Not enough virtual memory or paging file
quota is available to complete the specified operation." and I am trying to figure out the problem. I already have 3 accounts that installed successfully on the system but these others are not installing on the system because of this error. Anyone got
any information on this problem or any suggestions as I am at a loss.

Hi,
Please let me know the operating system of your machine.
This is because, Windows Server 2012 has come with the concept of Group Managed Service Account (gMSA).
Following are the benefits of gMSA,
- A single gMSA can be used on multiple hosts.
- A gMSA can be used for scheduled tasks.
- A gMSA can be used for IIS Application Pools, SQL 2012 etc.
Checkout the below link regarding complete information on gMSA (creation and usage),
http://blogs.technet.com/b/askpfeplat/archive/2012/12/17/windows-server-2012-group-managed-service-accounts.aspx
Checkout the below thread on similar discussion,
http://social.technet.microsoft.com/Forums/en-US/5bc96d1b-0cec-4d0c-a99d-7f34509c0714/how-to-use-correctly-managed-service-account-in-windows-server-2012-?forum=winserverDS
Regards
Gopi
JiJi
Technologies

Kernel[0]: (default pager): [KERNEL]: Swap File Error.

Hello,
I am hoping that I can get some help in understanding what might have gone wrong here to create the mass hanging of many apps as depicted in the attached image below.
This is what I pulled from the logs:
Sep 11 08:47:10 steve kernel[0]: (default pager): [KERNEL]: ps_select_segment - send HI_WAT_ALERT
Sep 11 08:47:10 steve kernel[0]: low swap: suspending pid 622 (Adobe Photoshop )
Sep 11 08:47:10 steve kernel[0]: (default pager): [KERNEL]: Swap File Error.
Sep 11 08:47:14 steve com.apple.launchd[1] (com.apple.sleepservicesd[12240]): Exited: Killed: 9
Sep 11 08:47:14 steve kernel[0]: memorystatus_thread: idle exiting pid 12240 [SleepServicesD]
Sep 11 08:47:14 steve com.apple.launchd[1] (com.apple.xpcd.0A040000-0000-0000-0000-000000000000[12237]): Exited: Killed: 9
Sep 11 08:47:14 steve kernel[0]: memorystatus_thread: idle exiting pid 12237 [xpcd]
Sep 11 08:47:16 steve kernel[0]: (default pager): [KERNEL]: ps_select_segment - send HI_WAT_ALERT
Sep 11 08:47:16 steve kernel[0]: (default pager): [KERNEL]: Swap File Error.
Sep 11 08:47:16 steve kernel[0]: (default pager): [KERNEL]: ps_select_segment - send HI_WAT_ALERT
Sep 11 08:47:16 --- last message repeated 2 times ---
Sep 11 08:47:16 steve kernel[0]: (default pager): [KERNEL]: Switching ON Emergency paging segment
Sep 11 08:47:18 steve kernel[0]: Sandbox: sandboxd(12246) deny mach-lookup com.apple.coresymbolicationd
Sep 11 08:47:19 steve.local sandboxd[12246] ([12245]): fontworker(12245) deny file-read-data /Volumes/Users/Users/steve/Library/Preferences/ByHost/.GlobalPreferences.7FC032 09-A3F5-5B8F-ADA4-A2EA48544DC8.plist
Sep 11 08:47:19 steve.local sandboxd[12246] ([12245]): fontworker(12245) deny file-read-data /Volumes/Users/Users/steve/Library/Preferences/.GlobalPreferences.plist
Sep 11 08:47:19 steve.local sandboxd[12246] ([12245]): fontworker(12245) deny file-read-data /Volumes/Users/Users/steve/.CFUserTextEncoding
Sep 11 08:48:07 steve com.apple.launchd[1] (com.apple.sleepservicesd[12243]): Exited: Killed: 9
Sep 11 08:48:07 steve kernel[0]: memorystatus_thread: idle exiting pid 12243 [SleepServicesD]
Sep 11 08:48:08 steve kernel[0]: ]: ps_allocate_cluster - send HI_WAT_ALERT
Sep 11 08:48:08 steve kernel[0]: (default pager): [KERNEL]: ps_allocate_cluster - send HI_WAT_ALERT
Sep 11 08:48:09 --- last message repeated 403 times ---
Sep 11 08:48:09 steve kernel[0]: nd HI_WAT_ALERT
Sep 11 08:48:09 steve kernel[0]: (default pager): [KERNEL]: ps_allocate_cluster - send HI_WAT_ALERT
Sep 11 08:48:39 --- last message repeated 171 times ---
Sep 11 08:49:04 steve.local fseventsd[36]: SLOWDOWN: client 0x7fd92b015e00 (pid 622) sleeping due to too many errors (num usleeps 21)
Sep 11 08:49:17 steve kernel[0]: Sandbox: sandboxd(12256) deny mach-lookup com.apple.coresymbolicationd
Sep 11 08:49:18 steve.local sandboxd[12256] ([12255]): fontworker(12255) deny file-read-data /Volumes/Users/Users/steve/Library/Preferences/ByHost/.GlobalPreferences.7FC032 09-A3F5-5B8F-ADA4-A2EA48544DC8.plist
Sep 11 08:49:18 steve.local sandboxd[12256] ([12255]): fontworker(12255) deny file-read-data /Volumes/Users/Users/steve/Library/Preferences/.GlobalPreferences.plist
Sep 11 08:49:18 steve.local sandboxd[12256] ([12255]): fontworker(12255) deny file-read-data /Volumes/Users/Users/steve/.CFUserTextEncoding
Sep 11 08:49:28 steve com.apple.launchd.peruser.89[451] (com.apple.cfprefsd.xpc.agent[12253]): Exited: Killed: 9
Sep 11 08:49:28 steve kernel[0]: memorystatus_thread: idle exiting pid 12253 [cfprefsd]
Sep 11 08:49:28 steve kernel[0]: (default pager): [KERNEL]: System is out of paging space.
Sep 11 08:49:28 steve kernel[0]: (default pager): [KERNEL]: ps_allocate_cluster - send HI_WAT_ALERT
Sep 11 08:49:28 steve kernel[0]: low swap: suspending pid 7864 (Microsoft PowerP)
Sep 11 08:49:28 steve kernel[0]: low swap: suspending pid 658 (Google Chrome)
Sep 11 08:49:28 steve kernel[0]: (default pager): [KERNEL]: Swap File Error.
Sep 11 08:49:28 steve kernel[0]: (default pager): [KERNEL]: ps_allocate_cluster - send HI_WAT_ALERT
Sep 11 08:49:29 --- last message repeated 8 times ---
Sep 11 08:49:29 steve kernel[0]: te_cluster - send HI_WAT_ALERT
Sep 11 08:49:29 steve kernel[0]: (default pager): [KERNEL]: ps_allocate_cluster - send HI_WAT_ALERT
Sep 11 08:49:34 --- last message repeated 224 times ---
Sep 11 08:49:34 steve.local QuickLookUIHelper[12258]: [QL] QuickLookUIHelper is stuck - force quit now
Sep 11 08:50:02 steve.local fseventsd[36]: SLOWDOWN: client 0x7fd92e809400 (pid 593) sleeping due to too many errors (num usleeps 42)
Sep 11 08:50:02 steve.local fseventsd[36]: SLOWDOWN: client 0x7fd92e805400 (pid 1988) sleeping due to too many errors (num usleeps 42)
Sep 11 08:51:07 steve.local fseventsd[36]: SLOWDOWN: client 0x7fd92b015e00 (pid 622) sleeping due to too many errors (num usleeps 75)
Other notes that might help yuo help me.
Machine is an iMac with 16gig of RAM.
There are two partitions on the drive... one for the OS and one for users.
The OS has an 80gig Partition with 50% free space.
The User partition is much more with about 75% free space.
In the past I have noticed Photoshop to be using over 8gig of RAM so maybe it is photoshop.
Thanks
Morgs

There is excessive swapping of data between physical memory and virtual memory. That can happen for two reasons:
You have a long-running process with a memory leak (i.e., a bug), or
You don't have enough memory installed for your usage pattern.
Tracking down a memory leak can be difficult, and it may come down to a process of elimination.
When you notice the swap activity, open the Activity Monitor application and select All Processes from the menu in the toolbar, if not already selected. Click the heading of the Real Mem column in the process table twice to sort the table with the highest value at the top. If you don't see that column, select
View ▹ Columns ▹ Real Memory
from the menu bar.
If one process (excluding "kernel_task") is using much more memory than all the others, that could be an indication of a leak. A better indication would be a process that continually grabs more and more real memory over time without ever releasing it. Here is an example of how it's done.
The process named "Safari Web Content" renders web pages for Safari and other applications. It uses a lot of memory and may leak if certain Safari extensions or third-party web plugins are installed. Consider it a prime suspect.
If you don't have an obvious memory leak, your options are to install more memory (if possible) or to run fewer programs simultaneously.
The next suggestion is only for users familiar with the shell. For a more precise, but potentially misleading, test, run the following command:
sudo leaks -nocontext -nostacks process | grep total
where process is the name of a process you suspect of leaking memory. Almost every process will leak some memory; the question is how much, and especially how much the leak increases with time. I can’t be more specific. See the leaks(1) man page and the Apple developer documentation for details.

Vista - Several problems! 1-Corrupt default search provider; 2-Viewing files errors; and 3-BlueScreen error

I've got Windows Vista and can't download I.E. 10 (as someone in a previous question said solved their problem) I, too, get the message, "A program on your computer has corrupted your default search provider setting for I.E. I.E. reset to original provider
Google and will now open search settings..." Whenever I get to the search menu, addons/toolbars - the Google application is not verified and the "Top Search Results" is not available. I've tried checking the box "Prevent search providers
from..." but that doesn't help.
I've also encountered another problem that started 6 months ago, where if I try to read a report (specifically docket files through the county judicial portal) I get a blank page. Prior to this I was able to view all dockets. Don't know why!
And, last but not least! I just checked "troubleshooting problems" and see there was a device driver problem found from 5/10/14. Information is as follows:
Problem Signature
Probem Event Name:     BlueScreen
OS Version:                  6.0.6002.2.2.0.768.3
Locale ID:                     1033
Files that help describe the problem (some files may no longer be available)
Mini051014-01.dmp
sysdata.xml
Version.txt
Extra information about the problem:
BCCode:   1000007e
BCP1:       C0000005
BCP2:       82852755
BCP3:       88C57B10
BCP4:       88C5780C
OS Version:     6_0_6002
Service Pack:   2_0
Product:          768_1
Server Information:   2b09da0c-fc9e-4f58-9186-7ac2a9278961
I hope you can help with any/or all of these issues. I always thought I knew my way around the computer but I cannot get these issues resolved.
Please Help!! Thanks!

Hi,
In order to assist you, we will need the .DMP files to analyze what exactly occurred at the time of the crash, etc.
If you don't know where .DMP files are located, here's how to get to them:
1. Navigate to the %systemroot%\Minidump folder.
2. Copy any and all DMP files in the Minidump folder to your Desktop and then zip up these files.
3. Upload the zip containing the .DMP files to Onedrive or a hosting site of your choice and paste in your reply. Prefered sites: Onedrive, Mediafire, Dropbox, etc. Nothing with wait-timers.
4 (optional): The type of .DMP files located in the Minidump folder are known as Small Memory Dumps. In %systemroot% there will be what is known as a Kernel-Dump (if your system is set to generate). It is labeled MEMORY.DMP. The difference
between Small Memory Dumps and Kernel-Dumps in the simplest definition is a Kernel-Dump contains
much more information at the time of the crash, therefore allowing further debugging of your issue. If your upload speed permits it, and you aren't going against any strict bandwidth and/or usage caps, etc, the Kernel-Dump is the best
choice. Do note that Kernel-Dumps are much larger in size due to containing much more info, which is why I mentioned upload speed, etc.
If you are going to use Onedrive but don't know how to upload to it, please visit the following:
Upload photos and files to Onedrive.
Please note that any "cleaner" programs such as TuneUp Utilities, CCleaner, etc, by default will delete .DMP files upon use.
If your computer is not generating .DMP files, please do the following:
1. Start > type %systemroot% which should show the Windows folder, click on it. Once inside that folder, ensure there is a Minidump folder created. If not, CTRL-SHIFT-N to make a New Folder and name it Minidump.
2. Windows key + Pause key. This should bring up System. Click Advanced System Settings on the left > Advanced > Performance > Settings > Advanced > Ensure there's a check-mark for 'Automatically manage paging file size for all
drives'.
3. Windows key + Pause key. This should bring up System. Click Advanced System Settings on the left > Advanced > Startup and Recovery > Settings > System Failure > ensure there is a check mark next to 'Write an event to the system
log'.
Ensure Small Memory Dump is selected and ensure the path is %systemroot%\Minidump.
4. Double check that the WERS is ENABLED:
Start > Search > type services.msc > Under the name tab, find Windows Error Reporting Service > If the status of the service is not Started then right click it and select Start. Also ensure that under Startup Type it is set to Automatic rather than
Manual. You can do this by right clicking it, selecting properties, and under General selecting startup type to 'Automatic', and then click Apply.
If you cannot get into normal mode to do any of this, please do this via Safe Mode.
Regards,
Patrick
“Be kind whenever possible. It is always possible.” - Dalai Lama

Cannot edit my paging file which is set to 'no paging file"

Hello,
I am having a lot of trouble with my paging file (or lack of) and it relates to a thread in 2010 http://tinyurl.com/m3pz3yz - it wouldn't let me link the actual url)
I just need some guidance really as I'm not too good with computers, and I'm at my wit's end trying to fix this after 5 hours. So this is my last resort.
I have tried everything mentioned in the thread, I do not have the AFS driver in my registry, and the problem still persists in safemode. I saw people mentioned their OS loading from a VHD file, but
I have no idea what that is or how to find out if mine is doing the same.
The problem could be a third party driver, as mentioned in the thread, but because the problem still persists in safemode I don't know where to look.
Motherboard: ASUS P8P67 LE
OS: Windows 7 Home Premium
Hard disk drive: WDC WD5002AALX-00J37A0
The main problem is that when I go to play games on high graphics, they work perfectly for about 5 seconds then crash, and I get a windows error saying "Your computer is low on memory. Please close X programme." How ever my computer should be able
to run games on the highest setting, but I believe that having no paging file is the cause of this.
Kind Regards,
Joe

See info in two threads:
https://social.technet.microsoft.com/Forums/windows/en-US/ec146153-6439-4d09-be00-1798990e6d2f/virtual-memory-issue-with-windows-7-build-7100?forum=w7itproperf and
http://answers.microsoft.com/en-us/windows/forum/windows_7-performance/windows-7-set-to-no-page-file-and-i-cannot-change/992de6a8-bec2-4e74-b6d9-d418a7f5cda0
"which stated that you need to launch a command prompt in Administrative mode and run the command:
sc config afs start= disabled
Note that there is no space after start but there is one after =.
Please remember to click “Mark as Answer” on the post that helps you, and to click “Unmark as Answer” if a marked post does not actually answer your question. This can be beneficial to other community members reading the thread. ”

" Can not interpret the data in file " error while uploading the data in DB

Dear All ,
After running the below report I am getting the " Can not interpret the data in file " error.
Need to upload the data in DB through excel or .txt file.
Kindly advise to resolve the issue.
REPORT ZTEST_4.
data : it like ZPRINT_LOC occurs 0 with header line,
FILETABLE type table of FILE_TABLE,
wa_filetable like line of filetable,
wa_filename type string,
rc type i.
CALL METHOD CL_GUI_FRONTEND_SERVICES=>FILE_OPEN_DIALOG
CHANGING
FILE_TABLE = filetable
RC = rc.
IF SY-SUBRC = 0.
read table filetable into wa_filetable index 1.
move wa_filetable-FILENAME to wa_filename.
Else.
Write: / 'HI'.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
start-of-selection.
CALL FUNCTION 'GUI_UPLOAD'
EXPORTING
FILENAME = wa_filename
FILETYPE = 'ASC'
HAS_FIELD_SEPARATOR = 'X'
TABLES
DATA_TAB = it.
IF SY-SUBRC = 0.
Write: / 'HI'.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
insert ZPRINT_LOC from table it.
if sy-subrc = 0.
commit work.
else.
rollback work.
endif.
Regards
Machindra Patade
Edited by: Machindra Patade on Apr 9, 2010 1:34 PM

Dear dedeepya reddy,
Not able to upload the excel but have sucess to upload the .csv file to db through the below code. Thanks for your advise.
REPORT ZTEST_3.
         internal table declaration
DATA: itab TYPE STANDARD TABLE OF ZPRINT_LOC,
      wa LIKE LINE OF itab,
      wa1 like line of itab.
                   variable declaration
DATA: v_excel_string(2000) TYPE c,
       v_file LIKE v_excel_string VALUE    'C:\Documents and Settings\devadm\Desktop\test.csv', " name of the file
        delimiter TYPE c VALUE ' '.         " delimiter with default value space
     read the file from the application server
OPEN DATASET v_file FOR INPUT IN TEXT MODE ENCODING DEFAULT.
IF sy-subrc NE 0.
write:/ 'error opening file'.
ELSE.
    WHILE ( sy-subrc EQ 0 ).
      READ DATASET v_file INTO wa.
      IF NOT wa IS INITIAL.
        append wa TO itab.
      ENDIF.
      CLEAR wa.
    ENDWHILE.
ENDIF.
CLOSE DATASET v_file.
EXEC SQL.
     TRUNCATE TABLE "ZPRINT_LOC"
ENDEXEC.
*------display the data from the internal table
LOOP AT itab into wa1.
WRITE:/ wa1-mandt,wa1-zloc_code,wa1-zloc_desc,wa1-zloc,wa1-zstate.
ENDLOOP.
insert ZPRINT_LOC from table itab.

Logical end of file error

I am getting a "logical end of file error =39" message when trying to export audio to SDII for making a time stamped (BWF) . Any ideas?

How long is the wedding video?
My standard list of things to do first...
Run MacJanitor (free download) to do all the Unix Cron Maintenance scripts.
Run Disk Utility (Applications -> Utilities) and repair disk permissions on your start up drive (typically your internal drive). Also verify any other drives mounted on the system.
Run Preferential Treatment (free download) to check for corrupt/damaged application and system preference files.
Run Cache Out X (free download) to clear all system and application caches.
Reboot your Mac.
If you still can not get it to run correctly, next thing to try is to throw out the iDVD preference file (don't forget to change back those preferences you want different from the defaults next time you run it). If it still doesn't work, then I would suggest you reinstall iDVD.
Patrick

Paging file error!

Similar Messages

Maybe you are looking for