Paid membership for Muse no longer works since recent update

I have a paid membership for Adobe Muse, but after a recent update Adobe only allows me access Muse through a 30-day free trial. I am occasionally requested to enter a serial number for Muse, but cannot find any reference to this in my past emails. How can I overcome this ongoing issue?

Hi,
Please try the steps below depending on the operating system,
Windows
Click on the "Start" menu. Select "All Programs" and then "Accessories"
Right-click on "Notepad" and select "Run as Administrator"
Click "Continue" on the "Windows needs your permission" dialog
When Notepad opens, click File and select Open
In the filename field type the following:C:\Windows\System32\Drivers\etc\hosts
If any entries in the host file include keywords such as "adobe," delete those entries. These are used for Adobe Licensing.
From the "File" menu select "Save" after making changes
Restart Muse
Macintosh
Click on the "Finder" icon. Select the "Applications" folder
Open the "Utilities" folder and select "Terminal"
Type the following:sudo nano /etc/hosts
Enter the OS user's associated password when prompted
If any entries in the host file include keywords such as "adobe," delete those entries. These are used for Adobe Licensing.
Press control+o to save the file
Press control+x to close the file
Restart Muse
Please let me know if it works.

Similar Messages

Syncing with iPad mini does no longer work since latest update of iTunes

Syncing with iPad mini does no longer work since latest update of iTunes and iPad mini

Hi grecokev,
Thank you for contributing to the Apple Support Communities.
You mention that your iPod nano is no longer recognized by iTunes after an update. Reinstalling iTunes is a good troubleshooting step, and if the device still doesn't appear in iTunes, try the following steps next:
Turn off your computer and your iOS device or iPod, then turn them on again.
Check to make sure that you've installed all required updates for your computer.
Verify that the 30-pin to USB cable or Lightning Connector to USB cable is free of debris and not damaged. If another cable is available, test with that cable instead.
USB cables that are bundled with third-party products or accessories might work only to charge those products and might not transmit data. Also, if you're using a third-party case or extended battery pack, try removing the case and connecting the Apple-supplied USB cable directly to your device.
You can find these steps in this troubleshooting article:
iPhone, iPad, or iPod not recognized in iTunes for Windows - Apple Support
If the steps above don't solve it, see the section of the article called "Verify that Apple Mobile Device Support is installed" for some additional steps to try on your PC.
Best Regards,
Jeremy

HT201365 The keyboard on my phone no long works since ios7 update, I switched phone off to reset why

Keyboard on my phone no longer works since ios7 update. Advice please

Can you be more specific? Not in any application? Like writing an email, entering an address into Safari, sending a text message ...
If you touch a certain spot in those apps, the keyboard should slide up from the bottom.
If still not, what about restarting the phone? Does that help?

Word for Mac no longer working since updating

Since updating to lion my Word for Mac won't open

You're welcome. You might want to check for other PPC apps to avoid being caught off guard again. If you go to the Apple Menu and choose About This a Mac, then click more info, then a System Report, and finally Applications (or Software I can't remember) you can see how each application is coded. Anything that has PPC next to the mane will no longer work.

TS3771 My iTunes U no longer works since the update, an error message pops up saying that "This movie requires QuickTime, which is not supported by this version of iTunes." I followed the tutorial that suggests to change to from 64 to 32 bit and it didn't

iTunes U video files no longer work on my computer since i update to Mavericks. The following message appears on the screen "This movie requires QuickTime, which is not supported by this version of iTunes." I followed a tutorial that suggested to go to Applications/iTunes/Get Info and change to 32 bit. Now my iTunes does not open at all, it says it requires 64 bit. I am a bit confused and disappointed. What should I do to get it fixed? Buy a new MacBook?

Marcello, I am having the same problem. When following the advice of many in the community to start iTunes in 32-bit mode, I get the following error after I have done so:
I am running 10.9.2 on a mac mini.
I am hoping this will be fixed or at least a solid answer could be given that iTunes will no longer support certain types of media going foward.

Airtunes streaming no longer works since last update

I have been using my Airport Express to straem Airtunes to my speakers for over a year. Immediately following my last software update, it no longer works. In iTunes, I can see the speakers, it just won't let me check them for use. The Express unit seems to be working properly and I have updated the firmware on it and the Extreme as well. Has anyone seen this behavior? Any suggestions would be greatly appreciated.

Marcello, I am having the same problem. When following the advice of many in the community to start iTunes in 32-bit mode, I get the following error after I have done so:
I am running 10.9.2 on a mac mini.
I am hoping this will be fixed or at least a solid answer could be given that iTunes will no longer support certain types of media going foward.

Quicktime no longer works since I updated Firefox - Apple won't help. Please advise.

When I get an Italian word of the day and click to play audio of it in sentence, I get a quicktime message that it needs a component. This just started happening, maybe since I updated Firefox. Not sure. I called Apple and they had me download something which fixes it with Safari and they say it's a Firefox problem. Any advice? I prefer Firefox.

The company that make the bioscanner for HP have abandoned it. For more details see https://support.mozilla.com/en-US/questions/799388

My video links no longer work since micro updates were installed

My problem is as per subject I use HP desk top s5765UK Windows 7 64 Only changes were Microsoft updates

Hello Immunetoall,
What video links?
Are they stored locally on the computer or are you visiting a website?
What browser do you use?
Where do these videos link to? (e.g. youtube)
What happens when you click on a video link? Saying "it doesn't work" doesn't really tell me what you are seeing to be able to accurately understand your issue.
If I have helped you in any way click the Kudos button to say Thanks.
The community works together, click Accept as Solution on the post that solves your issue for other members of the community to benefit from the solution.
- Friendship is magical.

Outlook no longer working since OS update

Outlook error messages 3259 & 3260 - emails stuck in outbox (previously working fine)
I AM REPOSTING THIS FROM THE MICROSOFT OFFICE SUPPORT FORUM AS IT'S BEEN OVER 6 MONTHS AND NOTHING HAS HELPED
I am using Outlook 2011 for Mac (with Lion 10.7) and my emails have suddenly stopped sending and are sitting stuck in the outbox. The error messages received are either 3259 ("an operation on the server timed out.....") or error 3260 ("Outlook cannot connect to the server. Verify that your computer is connected to the network") with 3260 being the most recent and frequent. This is not an internet connection issue as all other internet programmes are working.
Its a small business POP account, I set it up myself and it has been working fine for for the last 3 months. I initially had this same problem (but can't remember the error message) and managed to sort it out by overiding the default port 25 and using 587 instead (picked this up on another forum and it worked fine). I have tried reverting the default port, rebuilding the outlook database (holding shift or option when starting), and emptying all folders and restarting the programme.
Obviously I have tried using the email account remotely and this is working as normal so this suggests an Outlook issue. I have also installed my mailbox on another machine and had no trouble. Any suggestions from you Mac experts? Over in Microsoft world nobody can figure it out....
thanks in advance

No I don't have HTML files, we have video streaming code from Brightcove that we paste into the Insert HTML dialog. One of the handy things about this was that we could quickly edit the code to change the size of the playback window on the page, then Brightcove automatically serves up the most appropriate resolution of the multiples it holds on its server.
My options now are:
1. Turn a rectangle frame into a standard web content frame and direct it to the video's fixed URL. Problem: we get one predetermined resolution and users don't know what it is, although they can get a rough visual idea by previewing the page on an iPad.
2. Create dozens of HTML files that contain different video streaming code and load them into standard web content frames. Problem: in order to specify and change the size of the videos on the page, users will have to edit the HTML files and then manually change the frame sizes.
Before we start spending too much time and cash on developing option 2, can I get an ETA on the fix for this bug, please? Is a downgrade to v24 really not possible?

Samsung SCX 4500 - Scanner no longer works since OS Update to 10.5.6

Hi all, my problem is already described in the subject line
The problem should have disturbed more people than just me.
Installing the latest drivers from Samsung did not do the job
Question: Anybody got the fix?
Samsung is rather clueless on this one
Thanks, Wolfgang

Here's what you do -
(Before following the directions below make sure you have removed the Samsung printer from the Print & Fax section of System Preferences and reboot your computer - then proceed with the following)
1. Using a Cat-5 cable, turn your printer on and plug your Samsung directly into your router;
2. Hold down the Stop/Clear button on the printer down for 5 seconds or untill two 00 (zeros) show up on the information bar on the top of the printer;
3. Read the "Configuration report and note the IP Address given;
4. Open your web browser and type in the printer's IP Address you wrote down;
5. When the SyncThru Web Service page comes up click on the "Network Settings" tab across the top menu bar;
6. Click on the TCP/IP tab on the left side under the "General" tab;
7. Change the "IP Address Assignment Method" from DCHP †o STATIC;
8. Hit the "APPLY" button on the bottom and exit from your browser;
9. Open Print & Fax under System Preferences and hit the " + " button to install a new printer;
10. Install the Samsung and you should be good to go!

Middle mouse click no longer works after recent update

I noticed after updating about 3 days ago that clicking the scroll wheel no longer acts as middle click on my MX Revolution mouse from logitech anymore. Pressing on the scroll wheel use to act as middle mouse click, now it just switches between scroll modes. I would like to have the former functionality returned as I really like to be able to open links in new tabs and paste with just one click.
Does anyone know how I could get this functionality working again on this mouse? All other button functions work as they did prior to the update that changed my scroll wheel click behavior.
Thanks for any help with this matter and please let me know if any other information is needed to diagnosis this problem.
Last edited by daedalusman (2009-07-26 05:06:48)

djszapi wrote:
Does this mouse work with other OS/PC ?
After a simple reboot or pacman -Syu, do you backup to roll back ? Can you mention which packages/files were updated?
Yes the mouse works in windows, but logitech provides a configuration utility for it and so I use that set it up. In linux there is no such utility to configure the mouse. There use to be btnx and that worked great but it's no longer in the repos or AUR so I don't use that anymore. I haven't done pacman -Sc or pacman -Scc in a while so I should still have the packages to roll back, but I'm not sure what package update caused this. Here is a list of the of packages that were updated just before this started happening, from pacman.log...
[2009-07-22 11:20] synchronizing package lists
[2009-07-22 11:20] starting full system upgrade
[2009-07-22 11:21] starting full system upgrade
[2009-07-22 11:23] upgraded python (2.6.2-4 -> 2.6.2-5)
[2009-07-22 11:23] upgraded brltty (4.0-2 -> 4.0-3)
[2009-07-22 11:23] upgraded cairomm (1.8.0-1 -> 1.8.2-1)
[2009-07-22 11:23] upgraded device-mapper (1.02.32-2 -> 1.02.33-1)
[2009-07-22 11:23] upgraded devicekit-power (008-1 -> 009-1)
[2009-07-22 11:23] upgraded dri2proto (2.0-1 -> 2.1-1)
[2009-07-22 11:23] upgraded ptlib (2.6.2-1 -> 2.6.4-1)
[2009-07-22 11:23] upgraded opal (3.6.2-1 -> 3.6.4-1)
[2009-07-22 11:23] upgraded ekiga (3.2.4-1 -> 3.2.5-1)
[2009-07-22 11:23] upgraded glibmm (2.20.0-1 -> 2.20.1-1)
[2009-07-22 11:23] upgraded pango (1.24.4-1 -> 1.24.5-1)
[2009-07-22 11:23] upgraded gtk2 (2.16.4-2 -> 2.16.5-1)
[2009-07-22 11:23] upgraded libcanberra (0.12-1 -> 0.14-1)
[2009-07-22 11:23] upgraded gnome-power-manager (2.26.2-1 -> 2.26.3-1)
[2009-07-22 11:23] upgraded gstreamer0.10-base-plugins (0.10.23-1 -> 0.10.23-2)
[2009-07-22 11:23] >>> Updating module dependencies. Please wait ...
[2009-07-22 11:23] >>> MKINITCPIO SETUP
[2009-07-22 11:23] >>> ----------------
[2009-07-22 11:23] >>> If you use LVM2, Encrypted root or software RAID,
[2009-07-22 11:23] >>> Ensure you enable support in /etc/mkinitcpio.conf .
[2009-07-22 11:23] >>> More information about mkinitcpio setup can be found here:
[2009-07-22 11:23] >>> http://wiki.archlinux.org/index.php/Mkinitcpio
[2009-07-22 11:23]
[2009-07-22 11:23] >>> Generating initial ramdisk, using mkinitcpio. Please wait...
[2009-07-22 11:23] ==> Building image "default"
[2009-07-22 11:23] ==> Running command: /sbin/mkinitcpio -k 2.6.30-ARCH -c /etc/mkinitcpio.conf -g /boot/kernel26.img
[2009-07-22 11:23] :: Begin build
[2009-07-22 11:23] :: Parsing hook [base]
[2009-07-22 11:23] :: Parsing hook [udev]
[2009-07-22 11:23] :: Parsing hook [autodetect]
[2009-07-22 11:24] :: Parsing hook [pata]
[2009-07-22 11:24] :: Parsing hook [scsi]
[2009-07-22 11:24] :: Parsing hook [sata]
[2009-07-22 11:24] :: Parsing hook [filesystems]
[2009-07-22 11:24] :: Generating module dependencies
[2009-07-22 11:24] :: Generating image '/boot/kernel26.img'...SUCCESS
[2009-07-22 11:24] ==> SUCCESS
[2009-07-22 11:24] ==> Building image "fallback"
[2009-07-22 11:24] ==> Running command: /sbin/mkinitcpio -k 2.6.30-ARCH -c /etc/mkinitcpio.conf -g /boot/kernel26-fallback.img -S autodetect
[2009-07-22 11:24] :: Begin build
[2009-07-22 11:24] :: Parsing hook [base]
[2009-07-22 11:24] :: Parsing hook [udev]
[2009-07-22 11:24] :: Parsing hook [pata]
[2009-07-22 11:24] :: Parsing hook [scsi]
[2009-07-22 11:24] :: Parsing hook [sata]
[2009-07-22 11:24] :: Parsing hook [filesystems]
[2009-07-22 11:24] :: Generating module dependencies
[2009-07-22 11:24] :: Generating image '/boot/kernel26-fallback.img'...SUCCESS
[2009-07-22 11:24] ==> SUCCESS
[2009-07-22 11:24] upgraded kernel26 (2.6.30.1-1 -> 2.6.30.2-1)
[2009-07-22 11:24] upgraded lib32-libdrm (2.4.11-2 -> 2.4.12-1)
[2009-07-22 11:24] upgraded libdrm (2.4.11-2 -> 2.4.12-1)
[2009-07-22 11:24] upgraded libpng (1.2.37-1 -> 1.2.38-1)
[2009-07-22 11:24] upgraded libtracker (0.6.6-1 -> 0.6.95-1)
[2009-07-22 11:24] upgraded lvm2 (2.02.47-2 -> 2.02.48-1)
[2009-07-22 11:24] upgraded mesa (7.4.4-1 -> 7.5-1)
[2009-07-22 11:24] upgraded nautilus-cd-burner (2.24.0-1 -> 2.24.0-2)
[2009-07-22 11:24] upgraded perl (5.10.0-5 -> 5.10.0-6)
[2009-07-22 11:24] upgraded pycairo (1.8.4-1 -> 1.8.6-1)
[2009-07-22 11:24] upgraded xorg-server (1.6.1.901-3 -> 1.6.2-1)
[2009-07-22 23:38] adding new group: ntp
[2009-07-22 23:38] adding new user: ntp
[2009-07-22 23:38] installed openntpd (3.9p1-7)
Hope this helps in figuring out this problem, thanks for your help.

Mouse gesturing no longer works after recent update ?

Recently, after an update my magic mouse no longer functions using the swipe gestures...Anyone else with this issue?
tried to look at in in preferences bt no options there.

Helpful link from 95bulls. Here is the Apple link which deals with the more general problems one can have with an unresponding Mouse. Is the green power light working or blinking?
You don't say which update or give any details of the OS you use. Please try to find a moment to update your profile.

MSI Live Update will no longer work after recent update

Recently, MSI Live Update upgraded itself and now errors when a scan is attempted. I can start the application, and the scan appears to occur but does not complete. The error is pretty generic:
Microsoft Visual C++ Runtime Library
Runtime Error!
Program C:\Program Files (x86)\MSI\Live Update 6\Live Update.exe
This application has requested the Runtime to terminate in an unusual way. Please contact the application's support team for more information.
First thing I did was uninstall the tool, delete the directory, reboot and download and install Live Update 6.x from the MSI site. No change. I figured there was possibly a problem with (one of the) C++ Runtime libraries and checked the system requirements on the MSI website, but all it says its needs is the .NET runtime library. I uninstalled it, rebooted, and reinstalled it but still received the same error. Going with the error, I removed all of the C++ libraries (8, 10, and 12 I think), rebooted, and reinstalled them the checked MS for updates. Sadly, this also didn't resolve it.
Error in the application log didn't help:
Faulting application name: Live Update.exe, version: 6.0.12.0, time stamp: 0x54768b62
Faulting module name: Live Update.exe, version: 6.0.12.0, time stamp: 0x54768b62
Exception code: 0x40000015
Fault offset: 0x000e6ea8
Faulting process id: 0x141c
Faulting application start time: 0x01d019a539b60b20
Faulting application path: C:\Program Files (x86)\MSI\Live Update 6\Live Update.exe
Faulting module path: C:\Program Files (x86)\MSI\Live Update 6\Live Update.exe
Report Id: 43510adb-8599-11e4-826e-d43d7ebc702d
Faulting package full name:
Faulting package-relative application ID:
Yep, the package names were blank.
Searching the forum didn't yield much. Suggestions?

Thanks for the suggestions - still in the same boat.
@jb0nez
what OS you are running? Windows 8.1 x64
what MSI hardware you have?
Board: Z87-G43 GAMING
Bios: American Megatrends v1.9 (7/21/2014)
Intel Core i5-4670 @ 3.40GHz (not overclocked)
OS: Windows 8.1 Pro x64
@jb0nez
I fixed it though--went to Control Panel, Uninstall a Program, found Microsoft .net 4.5.1, hit Change/Uninstall, then clicked Repair. Rebooted after and it was fine.
Windows 8.x has .NET 4.x preinstalled as a part of the OS.
I used DISM.exe which identified a component store corruption (and repaired it). Live Update still errors.
Attempts to install from a .NET runtime returns an error of "A higher version is already installed".
Version of .NET installed: 4.5.51641
I did disable, reboot, and re-enable .NET as a feature but doing so does not revert it back to stock .NET.
I also checked Windows Update after re-enabling it and there were no updates - so its not flushing the binaries if its disabled.
At least I have a direction to start troubleshooting (.NET) - thanks for the tip!
@jb0nez
are you also use the same version? Live Update 6.0.012
@TZBC
Restore points are out - I let this slide too long. If I go that route, I'll be fixing one app to break 10 others.
If I'm going to reinstall the OS, I'll wait until Windows 10 (I'll do a complete wipe at that time). Live Update is a 'nice to have', but its not worth my time to wipe the OS and rebuild the system.

Continuous mode no longer works in recent update

I'd like to tell you the version but there is no About in the newest Reader. When reading in continuous mode the first or second page is ok but then the pages get unreadable. It looks like a posting capture picture. Unreadable. Please fix as Reader is nearly unusable now.

Would you provide more information about the problem?
To check the version number of Adobe Reader
Go to the Reader home screen.
Tap Help.
Tap the Overflow menu button in the upper right corner.
Select "About Adobe Reader" from the menu.
(Click the image above to enlarge)
What is the version of Adobe Reader? (See above.)
What is the model number of your Android device?
What is the Android OS version?
Do you see the same problem in the Single Page mode?
Does the same problem occur with all of the PDF documents that you have or just particular ones?
How long does it usually take for pages to become unreadable? As soon as you open it? When you start scrolling? Or does it take a couple of minutes?
When you wait for a couple of seconds, will the unreadable pages become readable again?
Would you send your PDF document (that exhibits the problem) to [email protected] as an email attachment? Please add the link to this forum page to your email for reference.
Thank you for your help.

Camera not working since recent update of itunes in November-shuts down pho

Everytime I try to use my camera it either shuts down my phone or says I don't have enough room for pictures (which I know I do-because I have had many more-and I have deleted thirty pictures). Also my phone one day just would not turn on for a while after the update. Help!! I use the camera all the time and this is frustrating. any ideas? The screen looks funny after the I click camera and then it shuts down. I tried powering down and reseting.

Did you try a real reboot, not just turning off and on (totally different things)
A reset/reboot is:
Go to Home Screen
Press and Hold Home Button
Keep holding and press and hold Lock Button
Keep holding Both
You will see Slide to Turn Off (Don't let go to slide, just keep holding)
The phone will turn off (in time, but screen will look like it has some white lines)
Keep Holding
When you see the Apple Logo, you can let go.
Turning off via the Slide to Turn off while good and fine to turn off, is more like the Sleep Mode on a computer. Thus any locked up issues in memory remain when you turn back on. A reboot as described is like doing a real Turn off and Turn On on a computer.

Paid membership for Muse no longer works since recent update

Similar Messages

Maybe you are looking for