Pallet/Handling materials alone not to be printed

Hi,
While receiving the Goods Receipt we are receivng many pallets and other Handling materials in addition to the other materials.
While taking Transfer order print , the pallet & handling materials alone are not to be printed in TO.
Kindly help on this.
Regards,
Vengat

Hi Raghavan ,
Just check whether the same Pallets/Handling materials  is maintained in PO as a separate Material.
If yes ,you can ask ur ABAPer to pick from TR which was created later ( during GR ).
Ask your ABAPer to modify the program linked for prinitng .
Refer below customising path :
sproLogistics ExecutionWarehouse ManagementActivitiesDefine Print Control
Click Print Code for the Form.
Click Print Program for the Program.
Regards
Ramesh Ch

Similar Messages

  • My iPad shows a message "Cannot find AirPrint printer". I used to use my iPad to print materials using HP wireless printer D110. Now it does not want to print. Is this because I am now using IOS 7? What should I do to solve the problem? Help please.

    My iPad shows a message "Cannot find AirPrint printer". I used to use my iPad to print materials using HP wireless printer D110. Now it does not want to print. Is this because I am now using IOS 7? What should I do to solve the problem? Help please.

    Restart your WiFi router and printer by removing power for 30 seconds.

  • VAT not appearing in Print preview

    Dear Experts,
    We have created one Purchase order in our concern. That materials are not excise. only VAT applicable.
    In Calculation schema we have updated Printer setting. In PO, Conditions tab VAT is available. but in print preview we can not able to see.
    Rectify.
    Thanks

    Hi,
    Check did your VAT condition type is included in the purchase order Smartform or Form
    where Smartform or Form assigned to Purchase Order output type in t.code:NACE  with apllication EF.
    Discuss with your Technical Consultant and cross check inclusion of VAT condition in PO Smartform or Form with logic for calculation.
    Also check  did any validity  period set for VAT condition type?
    Regards,
    Biju K

  • Adobe Acrobat 9 Pro do not open when printing a pdf document. Can anyone help?

    Adobe Acrobat 9 Pro do not open when printing a pdf document, instead I open it with Adobe Reader X to be able to print.
    Can anyone help?

    Hi Edna,
    It sounds like Adobe Reader X is your default PDF file handler. Launch Adobe Reader X.  Choose Edit > Preferences > General.  Click the 'Select Default PDF Handler' button at the bottom and choose Acrobat 9 from the drop-down menu.  Click Apply, then OK.
    Restart your computer.  Acrobat 9 should now be your default PDF file handler again.
    -David

  • Not able to print xcelsius dashboards from pdf files.

    FYI. In case this has you stumped on how to print your dashboards from Adobe pdf you are not alone.You may have noticed that it is not possible to print your dashboards from Adobe pdf documents.  It is not possible to actually print any active embedded flash document from an Adobe pdf document and this behaviour is by design. You can however print your dashboards if they are exported to other formats such as such as MS Word or MS Excel.  Xcelsius 2008 does include a 'Print' button which you can add to your dashboards to allow your users to print them.

    FYI. In case this has you stumped on how to print your dashboards from Adobe pdf you are not alone.You may have noticed that it is not possible to print your dashboards from Adobe pdf documents.  It is not possible to actually print any active embedded flash document from an Adobe pdf document and this behaviour is by design. You can however print your dashboards if they are exported to other formats such as such as MS Word or MS Excel.  Xcelsius 2008 does include a 'Print' button which you can add to your dashboards to allow your users to print them.

  • AX not able to print; host is "busy"

    I have a new Airport Express connected via Ethernet to a router. The AX is configured in bridge mode because the router is handling NAT etc.
    I have a printer connected to the AX, I connect wirelessly to the AX and can see and set up the printer. However, when I try to print, I get a "host busy" error. If I delete the printer and try to set it up again, sometimes it doesn't show up.
    Through the Airport Setup Assistant, I can see the Airport but can't read the configuration. A hard-reset will let me re-configure it and set up the printer, but I'm not able to print.
    I tried to to update the firmware (currently 7.2.1) but it just spins endlessly trying to find the firmware.
    Can anyone help?

    Check under "Additional information" near the bottom here (the AirPrint knowledge base article):
    HT4356

  • Media selection not saved in Print dialog

    When I select my Media, Quality and Bit Depth in the "Main" window in the Print dialog, they are not saved even though I select Save Current Settings as Preset. They change back to Plain Paper, 300 dpi and 8-bit. This will not work for high quality photo printing on my Canon iPF5000 printer. I've tried many different settings but nothing I have tried will get my settings to be saved and used. What are the "magic words" because the ones I've been using are not working?
    I can print from Photoshop through a Canon 16-bit plug-in using my normal print paper profiles and get excellent results so the printer is working just fine. I am using the latest Canon print driver and firmware. I think if I could get the correct media type, quality and bit depth in the printer driver, I'd get good results as well. I have a new paper profiling device that can only print the test patches through the print driver... so I'm stuck so far.
    Your help is appreciated.
    OS X 10.9.2, Mac Pro 3.33 Ghz 6-core, 24 GB RAM

    I discovered the root of my problem. Canon does not have a printer driver for my iPF5000 that runs under Mavericks. My workaround was to load Mountain LIon on a separate drive and use the Canon supported print driver for OS X 10.8.x. Running under 10.8 worked and I was able to successfully input and send the media type to the printer. I was making printer paper profiles with a new x-rite ColorMunki Photo.
    After creating the paper profile, I copied it over to Mavericks where I use Canon's 16-bit plug-in in Photoshop to send print jobs to the iPF5000. This apparently uses a slightly different print driver than the stand-alone print driver since it works just fine. The profiles create prints that are a very close match to the screen images.
    Whether or not Canon will support Mavericks for the iPF5000 is anybody's guess since it's an older printer.

  • AIO remote does not find my printer

    I changed Internet providers a few months ago. I have not been able to print from my iPhone or iPad since then. AIO remote does not find my printer at all.

    Hi,
    Both AirPrint and the HP AIO Remote app relies on Multicasting, a such have to be supported and enabled by your router.
    Some routers support a such by default, some require settings changes and some do not support Multicasting which required for a such.
    Please clarify your router brand and model to better understand any possible steps to try.
    Regards,
    Shlomi
    Say thanks by clicking the Kudos thumb up in the post.
    If my post resolve your problem please mark it as an Accepted Solution

  • My blends in Illustrator CS4 are not saving or printing correctly.  Why?

    Why are my blends in Illustrator CS4 not saving or printing correctly???
    SPECS:
    Adobe CS4
    MAC 10.5.8
    I got a outlined Text blend with a drop shadow.  And another text with a drop shadow on top.  Not too complex at all.
    Heres some screenshots of the problem.
    (1) Adobe Illustrator Screenshot
    (1) Screenshot of my saved TIff file.  I saved as a PDF as well and still no luck.
    Any suggestions?

    Mylenium,
    Thanks for you time and suggestions!  You helped alot!  My layers panel was crazy.  I re-arranged, re-organized and stacked according to the graphic.  Solved my problem first try.  Not used to making sure the order is right in illustrator, only in photoshop.
    Thanks again man!
    -NightRed

  • My computer does not see my printer

    Hi: I am having a problem with my HP Photosmart 4500 printer. My computer does not see it. I have a USB connected to it, have uninstalled and installed the software two time, dowloaded the latest update and nothing. Add to that, I can not connect it by WIFI. WIFI on the printer is on but again, it's no where on any of the screens. The only variable I can think of that has changed has been the router I got recently from AT&T. Everything else works with the WIFI but no computer. I'm running 10.7.5. I have read the install instructions and nothing seems to be working. The one thing I do get from the HP install disc is a message reading the printer isn't recognized but there are no updates in support. OK, what am I missing here?

    Try these steps to uninstall the current software using the HP scrubber and then reinstall using the current HP driver available through Apple.
    To do so, perform the following steps:
    1. Go to Applications/Hewlett Packard/ and then click on “HP Uninstaller”
    2. Next click “Continue”
    3. Highlight the device on the left pane.
    4. Press and hold control+alt+command on the keyboard simultaneously while you click on “Uninstall”.
    5. After you do this, you will see a pop up that asks you if you want to uninstall all HP software. Please note, that in doing this, it will remove any other HP printers that you also have installed.
    6. Click “continue” and wait for the program to finish.
    7. After it completes, reboot your computer.
    Once the computer is back on, do the following steps:
    WARNING: This is will delete all of your printers.
    1. Go into “System Preferences” and then select either  “Print & Scan” or "Print & Fax".
    2. Right click (or control + click) on the rectangle listing your printers and then select “Reset Printing System”. 
    After you have reset the printing system, let's make sure you have the most recent HP driver package installed.
    You can do this two ways. First,  check for any available HP Update's by clicking the Apple icon and then Software Update. If there are any updates available, they should show up here. However, if the printer is connected by USB, it will not show any available updates. The other option is downloading the drivers from Apple's website.
    You can download it here: http://support.apple.com/downloads/DL907/en_US/HPPrinterDrivers2.14.dmg
    Once you have downloaded the driver package and completed the installation, you will want to plug your printer back in (if you were using a USB connection).  After the printer is plugged back in, go into your print settings under System Preferences > Print & Scan. To add the printer, click the plus sign. You should see your printer listed here. If not, click "Add Printer or Scanner." Click the name of your printer and then click "Use:” box.  Make sure that says the name of your printer and not AirPrint. If you are using the printer wirelessly, make sure that the printer "Kind:" is set to Bonjour or Bonjour Multifunction. Click "Add" down in the bottom right hand corner.
    This will add your printer back using the most recent HP print driver available through Apple. Let me know if this helps resolve your issue or not. If it doesn't, let me know I will see what else I can do.
    Best of luck,
    Kyle

  • My computer does not recognize my printer

    Dear Sir/Madam please can you help me my computer does not recognize my printer either by wireless or usb cable although I used to use it and it was good  thanks ayman 

    Running the diagnostics at http://www.hp.com/go/tools may help resolve the issue.

  • I have the latest ipad2 and trying to print a doc. It does not find my printer . My printer is a canon mp990 wifi

    I have the latest ipad2 and trying to print a doc. It does not find my printer . My printer is a canon mp990 wifi. Can anyone tell me what I am doing wrong?

    Hi,
    If you are trying to utilize AirPrint you need an HP compatible printer listed here.
    http://www.apple.com/ipad/features/airprint.html
    Scroll down.
    Carolyn  

  • Pages does not find my printer

    I can print from my iPad using Print n Share for all documents except those created in Pages, so I know my printer is configured correctly. However, when I try to print a document from Pages it  says no printer found.    As it is now I have to email the document to myself and then use Print n Share to print it. I should be able to print directly from Pages. Any suggestions would be appreciated.

    Robert-
    You are way ahead of me as far as the Command + K is concerned.  I couldn't find a Command key on the iPad's on-screen keyboard!  I believe :8081 is a port number.  You might try leaving off the :8081 and see if it makes a difference.  Another possibility is that the printer somehow lost its IP address and then received a different number via DHCP.  Check again with HP iPrint to see if it still finds the printer at the same address.
    I have a Macintosh computer running Snow Leopard.  I found an AppleScript script that adds a small text file to a hidden folder on the Mac, that allows the mac to share its printer as AirPrint over WiFi.  I found the information at:
    <http://discussions.apple.com/thread.jspa?threadID=2658720&tstart=0>
    I did not remove the printer from my Mac's list of printers.  Instead, I added a second occurrence of the same printer with a name like "AirPrint Shared".
    Fred

  • AirPort Extreme 6th gen, not recognize my printer HP deskjet ink advantage 1515

    I have AirPort Extreme 6th gen, it can not recognize my printer HP deskjet ink advantage 1515.
    I already contact hp support and they reply my printer is support by AirPort Extreme. This is the link web statement http://h10025.www1.hp.com/ewfrf/wc/document?docname=c00710847&tmp_task=useCatego ry&cc=us&dlc=en&lc=en&product=5385208#N59
    Also doing all instruction on the web, update firmware for AirPort Extreme and my ipad to latest firmware.
    But until now I can not share my printer through my AirPort Extreme 6th gen in my network.
    Anyone know how to solve this problem?

    Hi tonyioancy,
    Welcome to the HP Support Forums! I see you are running into a few problems with your HP Deskjet Ink Advantage 1515.
    I would like you to run the HP Print and Scan Doctor- It was designed by HP to provide users with the troubleshooting and problem solving features needed to resolve many common problems experienced with HP print and scan products connected to Windows-based computers.
    If you run the PSDR and are still experiencing the issues, please contact our technical support at 800-474-6836 as your printer may still be in warranty. If you live outside the US/Canada Region, please click the link below to get the support number for your region.
    http://www.hp.com/cgi-bin/hpsupport/index.pl
    Thanks,
    HevnLgh
    I work on behalf of HP
    Please click “Accept as Solution” if you feel my post solved your issue, it will help others find the solution.
    Click the “Kudos Thumbs Up" to the left of the reply button to say “Thanks” for helping!

  • HT4356 My iPad does not find the printer. I have tried the HP app and it works, but in any other app the printer is not seen. How do I get this printer visible to the iPad. All my other network computers find and print with out a problem.

    My iPad does not find the printer. I have tried the HP app and it works, but in any other app the printer is not seen. How do I get this printer visible to the iPad. All my other network computers find and print with out a problem.

    hi
    could you tell us what the other app is please

Maybe you are looking for

  • Oracle 8.1.5 on Windows XP

    Hi, I tried to Install Oracle 8.1.5 on Windows XP professional. It Installs completely, and then I created a Database through the Database Configuration Assistant and connect to that Database as well. Everything is working fine until I reboot my mach

  • Obtaining a weakly typed cursor variable's field list

    In a situation where a weakly typed cursor variable is passed to a procedure, after having been previously opened, is there any way to find out what the field names or aliases are that make up the underlying cursor? Is this information available in s

  • How to change the Label of input text box after selecting a value in LOV.

    Hi All, I have a requirement that after selecting a value in LOV the Label of the next input text box should change accordingly. I am able to do cascading LOV's. how can i meet this requirement? TIA, Vishal

  • ChaRM configurtn-No network connectivity in between DEV-QA1 to QA2 and PRD

    hi Experts, We are planning to implement solution manager for CHaRM configuration. Our Landscape is something like this... ECD(DEV)->EC1(QA1)  and EA2(QA2)->EAP(PRD) we are not having any network connectivity in between DEV-QA1 to QA2 and PRD. DEV an

  • Cost benefit analysis for using XI 3.0

    Hi, Does anyone have a cost benefit analysis document for using XI 3.0 versus developing point to point interfaces ? I need something that can easily justify and sell the idea of using XI over going down the custom path for point to point development