Palm m505 desktop installation.

I am currently using a Palm m100 with the Palm desktop 4.1 on a win98se computer. I just got a used m505 with all the original software disks. How can I install all the ancillary programs that come with m505 (eg: Avant Go, Documents to go etc), yet retain all the synced info on both my 4.1 desktop + my m100. The updates (backlight, copy, Daylight Savings Time, file manager), I see install with a hot sync. Must I install the 4.0 that came with the m505 over the current 4.1 to install all the ancillary programs, very confusing to a non-techie like me. When I went to the Palm support page for the m505, they also suggest installing the current desktop 4.1.4., is that advisable?.Whatever way, I want to ensure that I retain all the content I am currently using on my 4.1 desktop + my m100, so that I can continue using it after setting up the m505. Because my tech savvy is not that great please supply a point by point respose that is easy to follow. Much thanks, Ken.
Post relates to: Palm m505

Now we're talking a whole new ballgame... You'll need to follow Palm's "Guide to Upgrading to a new device" in order for the information to flow from the m100 to the m505!
How to Upgrade from a Previous Palm device to a Newer One: http://kb.palm.com/ and enter 12926 (General Upgrade guide) or 45175 (Upgrade to Centro) into the "solution ID:" box (lower right).
The critical step is to rename the /Backup folder in your Palm directory on your computer to something else (like BackupOLD) before doing a Hotsync to the m505.
This will ensure no m100-specific system files migrate to the m505. All PIM data should install on the m505, but no third-party programs. You can try to install any or all of these later one by one.
You'll need to Hard Reset the m505 to clear it out (if it isn't in this state already). That way, when you Hotsync the blank device to Palm Desktop, you'll be asked the question "Create a New Account, or Use an Existing One?" when you HotSync. Choose your old m100 username, and all the data should flow to the m505.
To perform a Hard Reset: (Palm Knowledgebase article #887)
While pressing and holding the Power button down, tap and release the Reset button in back and continue to hold the Power button down. When the grey Palm logo appears, you can release the Power button.
You should now see the warning page in about 5 languages. Press the UP direction on the 5-way pad to complete the task. Your Palm will reset itself several times as it re-installs the original programs and erases all your previous data.
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Similar Messages

Palm m505 Desktop onto Windows 7 Home Edition

Hi,
I desperately need help. I have a couple of Palm m505 with lots of contacts. I have upgraded to a new PC with Windows 7 Home Edition.
I have tried downloading both Palm 6.2 and Palm 4.1.0 onto my new PC but keep getting error messages when I try to install either of these.
Could some kind soul out there who knows how to solve this problem, help me with step-by-step instructions as I am fairly new to all this.
Keeping my fingers crossed.
Myra
Post relates to: Palm m505

I've moved your post to the Windows Hotsync section of the Forum, where your question has been asked and answered many times.
Look for the recent post about syncing to a m515 and Win7, or the sticky post at the top of the section entitled, "64 bit Palm Desktop drivers are here!"
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Separate Palm desktop installs for Palm M505 and its apps and Palm Treo 680 and its apps on same Windows XP computer?

Hello:
I'm trying to do a workaround. I've got a Palm M505 that has a terrific keyboard that hooks up to it. This lets me write documents in a very portable way. The Treo 680 never had the equivalent, really full-sized external keyboard made compatible with it. So, I want to create documents on the M505 but otherwise mostly use the Treo 680.
Here's the rub. When I tried to sync both devices to my Palm Desktop version 4.1.2 for Windows XP, it didn't work. Hotsync tries to synchronize apps that won't work on the M505. Also, the versions of Documents to Go are very different (5.x versus 8.x).
I would love to have a separate Palm Desktop installation for each device, so I can have a nice desktop environment for each by launching them separately. But, the Palm Desktop installation "wizard" shuts down and won't give me the opportunity to do a separate Desktop install.
Any ideas other than buying an ultra-small laptop and dropping this kludgy scheme? For instance, if I were to copy the installed files from one directory to another, would this work, or would it not be set up in the Registry?
Thanks!
Post relates to: Treo 680 (Cingular)
This question was solved.
View Solution.

Okay. Stubbornness pays off! I was able to beam documents between my Palm M505 and Treo 680, avoiding the need for complicated syncing of both Palms to my laptop machine. I was also able to beam documents from both Palms to my Dell Inspiron M300 laptop, running Windows XP Pro.
When beaming between Palm devices, the results were better. In the M505, Documents to Go version 5.004 doesn't translate documents into Microsoft Word format but into something it calls Word to Go. The Treo has DTG version 8.003, which is able to read files in Word to Go format and save in native Microsoft Word for Windows format.
However, even when beaming a Word to Go (old format) document directly onto the Desktop of my Windows XP machine, it gave me a document I could open, with the text I'd input following a bunch of characters Word obviously didn't understand. If I add the file from my desktop to the newer Documents to Go version on my laptop, I expect it will translate it into a Word file when it syncs to the Treo but haven't tested that. In either case, beaming between Palm devices is the easiest solution and completely solves the problem.
For any readers who are interested, the reason I've so stubbornly tried to solve this problem is that I'm a fast touch typist. My old Palm M505 plugs directly into a wonderful, old Palm Portable Keyboard that is full-sized. Because it's a hard-wired connection, I can type fast. That old keyboard compresses into the same folded footprint as some new foldover external keyboards. It does this even though much bigger by folding in an accordian-like fashion, with four flat surfaces folder together. That keyboard design now exists in some of the keyboards sold by IGo corporation (their old name for it was Sierra Stowaway Bluetooth Keyboard). But, they were unable to figure out how to handshake their Bluetooth with the odd Bluetooth configuation in the Treo 680. Why Palm made the Bluetooth library different in the Treo 680 from other Treos is a mystery to me, but enough of this tangent. Some interested in this workaround may be curious for similar reasons.
Post relates to: Treo 680 (Cingular)

Palm m505 Unable to Sync

I have been unable to sync my Palm m505 running Palm OS 4.1 for over a year. I am running Palm Desktop 4.1.4 on a Sony VGN-FS920 running XP Pro.
I have contacted Palm Support multiple times regarding this issue and sited an article that I found on their site indicating that this is a hardware related issue from Palm. They claim they are sending me a "reset" card by I have yet to receive anything from them in the last 5 months.
Can anyone tell me if there is any other way I can get all of my data off of my Palm m505 to another Palm device since I can't sync to the desktop? Is it possible to beam entire categories from one Palm to another?
Do you have any suggestions of how I can resolve this sync issue?
Here's the story from the Palm website about the m505 problem.....
New cradles offer enhanced ESD protection.
A small percentage of our m500 and m505 handheld users have reported synchronization issues - they are unable to perform the HotSync® function. The issue is electrostatic discharge (ESD).
Here's what happens: you sometimes build up excess static electricity (hair stands on end, clothes cling, you get a shock when you slide across your car seat), and if it isn't dissipated into, say, a door knob or metal cabinet, then it's possible that at the time you place the handheld into the cradle, a discharge of static electricity can occur, which in some situations can scramble the synchronization software. When this happens, neither the handheld nor the cradle is damaged, but the synchronization software needs to be reset by Palm.
Palm handhelds and HotSync cradles meet CE standards (8KV) for protection against electrostatic discharge. The newly designed “E” and “H” cradles include enhanced static electricity buffers. You can get one free if you own a Palm m500 or m505 handheld that did not ship with an enhanced cradle. Please contact Palm Technical support for additional information. Please have your Palm m500 or m505 serial number available.
Post relates to: Palm m505

I'm sorry to hear about the trouble you've been having. PM me with the Service request number and I can look into where that card is. (If you don't have the SR number, the name and contact number should be enough.) Don't post this information here. PM me.
Yes you can beam entire categories from one Palm to another.
Post relates to: None

Palm m505 won't recognize an expansion card

I have a Palm m505 with a mystery ebook expansion card that came with it. I insert it properly but hear no system sound. When I tap on the card icon, it says that there is no card inserted. I have not installed the Palm desktop, just trying out the unit. Why is this happening?. Also I want to get an sd card, will a photo type sd card be ok, also what is the megabyte limit the m505 will accept? I am not much of a techie so please make your reply easy to follow. Thanks, Ken.
Post relates to: Palm m505

You might want to try the File Manager update:
http://kb.palm.com/wps/portal/kb/na/m-series/m500/unlocked/solutions/article/48335_en.html
This fixed a formatting problem with cards larger than 128 megs.
Do you have a card reader on your computer that will read the card? It might just be defective!
Good luck finding a store that will work on a legacy Palm product!
WyreNut
Message Edited by WyreNut on 05-26-2009 05:18 PM
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Palm m505 to MacBook OS X

Hey all, have a new Mac Book, and loving it. However, trying to get an older model PDA (Palm m505) to sync with it. Having trouble. Computer isn't even recognizing that the docking staion is plugged in. Any help would be welcome. Thanks.
Travis

Welcome to Apple Discussions.
Are you attempting to synchronize your m505 handheld organizer using the Palm Desktop, using iSync or using the Missing Sync for Palm OS?
Troubleshooting your configuration requires an understanding of your basic configuration.
It is doubtful that your MacBook fails to recognize the presence of the USB docking station. It does not show up in the System Profiler unless it is actively communicating with your computer, and it cannot do that if your device has not been added successfully using the HotSync Manager, iSync or the Missing Sync. So, put that aside for the time being, describe your configuration, what and how you have installed your synchronization software, and exactly what error message or messages you receive when you attempt to add or configure your device, configure a conduit, or when you initiate a synchronization event using the HotSync button on your cable or cradle.

Palm m505 - Accidentally Deleted Memo

I just made a bit of an oops. I was working on a Memo in my Palm m505 and attempted to paste some text into it using the "/P" keystrokes. As occasionally happens, my strokes were interpreted as "/D" instead, which deletes the Memo. Fortunately, there is the confirmation screen. But as has never happened to me before, I absentmindedly confirmed before I fully realized what it was asking me.<br><BR> I have the Memo function on the m505 configured to "Save archive copy on PC", so I know the data is still in there. But I am working away from home and am not therefore not where I have my synchronization setup. Is synchronization the only way to access the deleted data that obviously is still in there somewhere? I would sure like to recover that memo sooner than I expect to be home if that is possible .
Post relates to: Palm m500
Post relates to: Palm m500

Once you delete the memo from the device you cannot recover it unless you have the same memo on the PC in Palm desktop. If it is in Palm desktop, you can sync to get the memo back on the handheld.
For reference purposes, click on the following link for the support page for your device on the kb.palm.com webpage.
http://kb.palm.com/wps/portal/kb/na/m-series/m500/unlocked/home/page_en.html
There are links on the page to the user guide, troubleshooting, how to's, downloads, etc.

Palm m505 download device software

I have a palm m505 and have not used it for a while. Now, I need to download a program and it requires a device software as it states that the hotsync is not making connections with the desktop computer. I have a Windows Vista and I am not sure if it has anything to do with this problem. Does anyone have the download software so I can test things out? I have checked online on the palms website but it still rejected it. Thanks!

I have a palm m505 and have not used it for a while. Now, I need to download a program and it requires a device software as it states that the hotsync is not making connections with the desktop computer. I have a Windows Vista and I am not sure if it has anything to do with this problem. Does anyone have the download software so I can test things out? I have checked online on the palms website but it still rejected it. Thanks!

Discoverer 4i desktop installation

Hi all,
I have to install Discoverer Desktop and Administrator on windows machine and 9i AS is on linux server.
To install these do i need to have Discoverer as part of 9i DS or can i directly install them if so should I install Administrator first or Desktop ?
Do i need to make any changes to the Registry ?
Should i stop all Oracle services before installing them ?
ThankYou

Duplicate thread (Please post only once):
Discoverer Desktop installation
Discoverer Desktop installation

Error code 1 - Creative Desktop Installation

Hello , I'm having failed the Creative Cloud Desktop installation ( error code 1 ) . can you help me?

Error Code 1: "Failed to install" | Creative Cloud Desktop : https://helpx.adobe.com/creative-cloud/kb/failed-install-creative-cloud-desktop.html

CC desktop installer, initializes, downloads and quits on a Mac with Yosemite

Today was asked to update CC. The update didn't work. After several attempts including using the cleaner tool now I am unable to clean reinstall. The CC desktop installer starts, initializes, downloads and the quits. Please help

I tried trough Adobe support by chat and they guided me to delete the OOBE, AAMupdater and Adobe Application Manager folders in the general and user-specific libraries. Just to make sure he wanted me to run the Adobe Creative Cloud Cleaner tool to remove completely CC. After this I was able to re-install CC, log-in, and install Photoshop and the new version of Lightroom. This solved the problem.
Thank you all for your replies.

Palm Centro Desktop not working with new install

I just got a Palm Centro (AT&T) and installed the software. I already had Palm Desktop from my Treo 650. My information came over to my phone during Hotsync, but I can not use my desktop. When I start the program, it says there is a problem and windows is shutting it down. I am using Vista. Can you help?
Post relates to: Centro (AT&T)

Try re-installing the software and do a repair of the install. If that doesn't work then you will need to do a "clean" uninstall and then install Palm desktop again.
You should first make a copy of your data to have just in case something
happens. You can find your data files by going to Start --> Documents -->
Palm OS Desktop. Highlight your Palm Desktop username and right click and
copy. Then go to your PC desktop right click on a blank spot and select paste.
Now you want to uninstall Palm Desktop and remove everything that has to do
with Palm Desktop from your computer.
Go to the following locations on the PC and delete the folders listed below.
C:\Program Files\Palm or Palm One
C:\Users\[Vista Login Name]\appdata\local\virtualstore\Program Files\Palm or
PalmOne
C:\Users\[Vista Login Name]\appdata
*Note you may need to view hidden folders to get to appdata. To do that go
into your control panel and open folder options. Go to view tab and uncheck
hide hidden files.
Once this is done you will need to delete some registry keys from your PC Operating System.
Word of warning, going here and deleting the wrong thing can cause your PC
from starting up, crashing and deletion of programs and data. If you feel
you are unsure of yourself, see if you have a friend that can help you or a
PC technician that you can pay to help you. This procedure will show them everything they need to delete. To make sure we have a good copy of the current registry, we need to do a backup of the Registry.
Go to start on the PC, in the search field type "regedit.exe" without quotes.
Highlight COMPUTER, go to File --> Export. Should pop up with a Save As box.
Current location is fine, should be in My Documents or save to a location you will remember. In the file name on the bottom type "backup[todaysdate]" i.e. backup07072008. Next, the hard part.
The easiest way to make sure your working with the correct key, highlight the key i.e. palm quick install, and press delete on your keyboard. It will ask you, are you sure. Say yes. Do the same thing for all keys below.
If you make a mistake, stop what you are doing. And call a PC technician.
BUT do not turn off your computer.
The reg keys are as follows (Note: some of theses reg keys will not be here
but if they are delete them)
* HKEY_CURRENT_USER\Software\U.S. Robotics\Palm Quick Install
* HKEY_CURRENT_USER\Software\U.S. Robotics\PalmOne File Transfer
* HKEY_CURRENT_USER\Software\U.S. Robotics\Pilot Desktop
* HKEY_CURRENT_USER\Software\Palm
* HKEY_CURRENT_USER\Software\Palm, Inc.
* HKEY_CURRENT_USER\Software\PalmDesktopAutorun
* HKEY_CURRENT_USER\Software\palmOne
* HKEY_CURRENT_USER\Software\PalmSource
* HKEY_LOCAL_MACHINE\Software\PalmSource or anything else that says palm
Next reboot your computer.
Then reinstall your palm desktop from the CD and do a hotsync. If it asks
you for a username and you synced your device before, put in 'test" if you
did not sync before create a hotsync name.
Post relates to: Palm i705

Hello , I'm having failed the Creative Cloud Desktop installation ( error code 1 ) . can you help me?

Hello , I'm having failed the Creative Cloud Desktop installation ( error code 1 ) . can you help me?

Error: "Failed to install" | Creative Cloud Desktop

Palm M505 doesn't start

Hello,
After starting a new application (BelTime) I got the message "Fatal exception" and can neither restart nor reset the device. Wat can I do?
Post relates to: Palm m505
This question was solved.
View Solution.

Hello m505userHB,
First, try performing a soft reset. For instructions on how to do that, grab a copy of the User Guide and head to page 229. Also, make sure you device is charged.
If that doesn't work, it's time to do a hard reset. That will erase all information on your device, but all the information you've synced to the computer will be restored on the next HotSync. Steps to performing a hard reset are on page 230 of the same User Guide

Palm os Desktop 6.2 beta

I downloaded the Palm OS Desktop for Vista and I can't color my catagories, I could on the version that I used on XP. Is this something that is not offered on the Vista version. Its not that big of a deal I just got used to it on the old version and would like to have it availible on the new
Post relates to: Treo 680 (Cingular)

kiwitex wrote:
Does anybody have any idea of when is the new Beta version of Desktop come out? The lack of colors is really a problem.
No idea. Your guess is as good as ours!
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Palm m505 desktop installation.

Similar Messages

Maybe you are looking for