Palm T/X Sync with Windows Vista - 64 processor

I have a Palm T/X handheld and recently purchased a new computer that has Windows Vista operating system and a 64-bit processor. I tried to download the software that would allow me to HotSync my T/X with Windows Vista, but apparently this does not work with a 64-bit processor. Is Palm going to provide that software download soon, or if not, how do I get around this issue? Thanks
Post relates to: Palm TX

I have not yet heard of any compatible software for the 64-bit but I have seen some solutions and ideas that might be helpful to you. Read through this thread and see if you find the information helpful!
Good Luck!
Post relates to: Tungsten E2

Similar Messages

  • Palm Z22 and sync with Windows Vista 64-bit system

    I have  been trying to sync my Palm Z22 with a new laptop that is running the 64-bit Vista.  Based on some posts I had located, I ordered an IrDA Wireless Bridge to try to resolve the connection problem.  Something isn't working right and I can't figure out how to fix the problem.  The IrDA adapter is listing in the hardware option on the computer so it appears to have installed correctly.  The laptop has inconsistently recognized the USB connection when I plug it in however.  I can not seem to get the IrDA adapter to recognize my Z22.  I've got the Z22 set up to use the infrared to transfer information.  I have noted that the "beam" feature is ON.  I have looked at APPS and have observed that most of those options are "locked" and when I have clicked on "contacts" for example, it says it's a locked app and can not be beamed.  I don't know if that is part of the problem  or unrelated.  I also happened to observe that the Apps are listed as what to transfer with MODEM connection but I'm not sure why that is even showing as a connection option since I've never used the modem to connect.
    I can successfully use my Z22 to connect via USB cable to my Vista 32-bit computer system.  I'm not sure what I'm doing wrong in my attempts to use the adapter and connecting the Z22 with the new laptop. 
    I'm not sure what else to do and would very much appreciate some help with this.  Could someone PLEASE tell me what I may be doing wrong re: the setup connection between the adapter and Z22 or any other ideas re: what the problem may be concerning why I'm not yet being successful in getting this setup to work...? 
    Many thanks in advance for any assistance with this problem.
    Post relates to: Palm Z22

    Sorry for the delay in replying (bet you were hoping this worked, huh?) but it has taken some time to uninstall & reinstall the Palm software and make numerous attempts to configure the information to again try to sync the Z22 with the laptop.  I went back to amazon.com and located the device I'd purchased to confirm it would work with the 64-bit Vista.  Someone had posted their success in using the adapter for exactly what I need to do - sync my Z22 with a 64-bit Vista computer.  That consumer's posting noted: "The USB 1510 provided the solution. As soon as I plugged it into the USB port of the laptop, Vista went online, found the driver, and installed it. I was able to set up IR Hotsync as I would have on any laptop with a built-in IRDA port."
    I don't know what problem I'm having but have noted that my palm desktop software doesn't note what device (Z22) is to be connected and I can't find anything in the HotSync manager that allows me to specify that device.  For some reason, I had gotten an error message and it referenced a Treo connection which is odd since I don't have a Treo and I downloaded this Palm desktop from the Z22 site online...?  I did note my software on my Z22 is a v. 5 but when I checked various support sites online, it appears to indicate that version on my Z22 would be compatible with the Palm 6.2 version I just downloaded to my computer (and I can't find any information to indicate a newer software for my Z22 is available or how to do that either).
    So, I'm back to not being able to get my Z22 to be recognized by my computer via the infrared adapter.  I'm hoping that some of the added information I've been able to provide may give another clue of something else I can try before I have to give up and contact Amazon to return this device and either try to decide what other device may be an option.  I had checked with a local computer supply store here but they don't carry any type of device for this purpose so that's why I resorted to searching online for a solution to this problem.
    Thank you in advance for any assistance you may still be able to provide.  I really do appreciate your time with this matter.

  • Hot Sync with Windows Vista, Windows 7`

    I have a client with a large deployment of Palm III and Palm IIIc devices. They are looking for a HotSync Manager that is compatible with Windows Vista and Windows 7, and that will still support sync operations with Palm III and Palm IIIc devices.

    http://forums.palm.com/t5/Windows-HotSync/Windows-7-and-Vista-hotsync-instructions-here/td-p/251755/...
    WyreNut
    I am a Volunteer here, not employed by HP.
    You too can become an HP Expert! Details HERE!
    If my post has helped you, click the Kudos Thumbs up!
    If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

  • Sync with windows vista

    if a sync my iPhone with windows vista i can do all what i can do if i have mac os x?

    I have outlook 2007 and my contacts, calanders all sync. I have another iphone that syncs to an imac and I do not see any difference in the ability to sync music, movies etc., except that the imac does it a lot faster than my dual core vista. Both are new machines but the Imac is about 65% faster at least. Hope this helps and enjoy your phone. I convinced my wife to chuck her blackberry curve (3 months old) for the iphone and now she's telling all her friends what a great improvement she made with her choice and she surfs the net, plays music and syncs like a pro.

  • Palm z22 will not sync with windows vista

    I have been following the forums and this seems to be consistent issue and no one seems to be able to give a straight answer as to what to do. I like to consider myself a biut of a techie, but this blows my mind. My computer recognized my z22 twice and synced twice, but ever since it synced with it the second time and i installed my belkin wireless key board it stopped working. I don't know why but my computer will no longer recognize the device, i've tried everything i've seen discussed i've installed different versions of palm desktop i've tried restarting my palm in everyway possible, there is no way on earth i am going to reload vista or wipe my hard drive or any crap like that i've got to much stuff and i don't have the disks for it anymore anyway. so what am i supposed to do. i'm trying to keep cool but this is sort of something i'm counting on working to help me keep organized while i go through college, and i think it's understandable that i would be a little frustrated.
    Post relates to: Palm Z22

    timm3r wrote:
     My only other question is what do I use to crop some MP3's to make some ringtones? And is there a recommended way to do this?
    Thank's again for all your help.
    -timm3r
    Check out either MusicTones or MiniTones, both free programs that work similarly.  Available from freewarepalm.com.
    They will scan your SD card for songs, then let you edit out a slice right on your Centro.  You choose the Start and Stop locations of the "slice".  When satisfied, click the "Add" button, and it will appear in your list of Ringtones.
    WyreNut
    I am a Volunteer here, not employed by HP.
    You too can become an HP Expert! Details HERE!
    If my post has helped you, click the Kudos Thumbs up!
    If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

  • Palm TX HotSync Problems with Windows Vista (DeskTop V6.2.2 HotSync Manager V7.0.2)

    I have recently had to re-install DeskTop on my Windows Vista PC and at the same time updated to V6.2.2. but the HotSync manager gets to "Synchronising Date Book" and just hangs up until I close things with Task Manager. I've tried re-booting my PC reloading the software and soft resetting my TX but so far I haven't found a solution. Can anyone help please?
    Post relates to: Palm TX

    When a sync hangs on a component of Palm Destop, it usually means the data is corrupted in that component. The calendar is the culprit most of the time.
    Click on the following link for the program called DbFixiT. This program has a trial version that you can download and install on your Palm OS device. The trial version will scan for database corruption and then report the corruption. You can then find the records causing the problem and fix them yourself or you can purchase the program and have it automatically fix the records.
    http://www.pimlicosoftware.com/dbfixit.htm
    To install the program, set all conduits to "do nothing" except quick install or install if using Palm desktop 6.2.
    After you install the program on the handheld, run the scan and also scan for Blobs in the calendar.
    After you clean-up the database on the handheld, set the conduits in hotsync to handheld overwrites desktop and perform a hotsync.
    If you need more info. regarding DBFixit, there is a PDF manual on their website.
    For reference purposes, click on the following link for the support page for your device on the kb.hpwebos.com webpage.
    http://kb.hpwebos.com/wps/portal/kb/na/tungsten/tx/unlocked/home/page_en.html
    There are links on the page to the user guide, troubleshooting, how to's, downloads, etc.

  • Cannot sync with Windows Vista and BB 7105t

    I was using Windows XP and everything worked great. Now I have Vista and cannot sync. I open the BB Desktop Manager and it says my device is disconnected. I am plugged in to a USB port, tried two different ones and makes no difference. Thus when I go to Synchronize, the Sync or Configure PIM are not available.  Also when I just plug into my computer to charge, I get a message "USB charge current is not suffigient. . . . "  However, it does charge, just a little more slowly than with my XP computer.  Any suggestions?

    Hi and welcome to the forums!
    Here is what you need to do.
    Use this procedure to cleanly uninstall the DM you have loaded:
    http://www.blackberry.com/btsc/search.do?cmd=displ​ayKC&docType=kc&externalId=KB02206&sliceId=SAL_Pub​...
    Go to here and download Desptop software 4.2.2 without Media manager;
    https://www.blackberry.com/Downloads/entry.do?code​=A8BAA56554F96369AB93E4F3BB068C22
    Cold boot the PC after de-install and :
    Install with these Vista condierations:
    1. Right-Click on Command Prompt in Start Menu and choose Run as Administrator
    2. Navigate to C:\Program Files\Research in Motion\Blackberry\IS71 Connectors\MS Outlook Connector by typing: c:\> cd program files\research in motion\blackberry\is71 connectors\ms outlook connector
    3. Then type in the command prompt, type: regsvr32 MsOutlookConnector.fil
    4. If the registration is successful, the following message displays:
    DllRegisterSErver in msoutlookconnector.fil succeeded.
    5. Close and open Blackberry Desktop Manager to perform the synchronization process again and Outlook will be in the list...
    If you receive the error message DllRegisterServer failed with error code 0x80070005 - you do not have admin rights. So, it's important that you run command prompt as admin. 
    http://sampath.wordpress.com/2008/03/04/installing​-blackberry-desktop-software-on-vista/
    Now go to your carriers blackberry software site, get the correct device OS and make sure the app loaded can find it.
    Configure the DM and try to sync.
    If you need more information, please ask!
    If not, please resolve the post using the options by the kudos’ star
    Just check the post that had your answer!
    Thanks 
    Message Edited by Bifocals on 10-17-2008 07:41 AM
    Click Accept as Solution for posts that have solved your issue(s)!
    Be sure to click Like! for those who have helped you.
    Install BlackBerry Protect it's a free application designed to help find your lost BlackBerry smartphone, and keep the information on it secure.

  • Bluetooth Sync with Windows Vista - 64 bit

    Recently found out that i have to use bluetooth to hot sync to my desktop PC.  It is a 64 bit Windows Vista.  I have the bluetooth device (USB), what do i need to do to the PALM device (T/X) to make sure the sync is appropriate?
    Post relates to: Palm TX

    Hi.. Welcome to the Palm forums.  First your computer has to have bluetooth compatibility,  if it is not built in then you will need to purchase a bluetooth dongle.  They are relatively cheap as I have seen them from $2 on up.  Next you would want to follow the following link as it has full instructions how to set it up as well as many other users that will be able to help answer your questions.  
    http://forums.palm.com/palm/board/message?board.id=windows_hotsync&thread.id=17980&view=by_date_asce....  
     Also here is a knowledge base article that will help walk you thru the process.  
    http://kb.palm.com/SRVS/nua/launchKB.asp?c=13950

  • Best calendar for iphone 5 sync with Windows vista ?

    I use windows vista at home/work. I need a new calendar/software ( eg Outlook ), and am considering purchasing the iphone5 as well.
    Which software do you recommend for windows vista that will easily sync back and forth with the iphone 5 ? 

    If all this changed after you had to change the password to access your server, then perhaps you are mistyping the password.
    The following articles may help:
    iPhone and iPod touch: Email account setup
    http://support.apple.com/kb/ht1385
    iPhone 2.1 software: Exchange ActiveSync Account Quick Setup Guide
    http://support.apple.com/kb/HT2480

  • IPhone sync with Windows Vista

    Hi,
    My Outlook was syncing fine with my iphone until I was asked to change my password. When I did this, my mail wouldn't come in anymore. So I erased my account and tried to set it up again. Now I can't even connect to the server! It says my password is invalid even though it works fine with my work computer and webmail.
    I heard that it will not sync because of a software issue between the iphone and Windows Vista server or something. Where can I get help for this??? I have no mails, contacts, or calendars. My IT department doesn't support iphone so they won't touch it, and the phone company has no idea also.

    If all this changed after you had to change the password to access your server, then perhaps you are mistyping the password.
    The following articles may help:
    iPhone and iPod touch: Email account setup
    http://support.apple.com/kb/ht1385
    iPhone 2.1 software: Exchange ActiveSync Account Quick Setup Guide
    http://support.apple.com/kb/HT2480

  • IPad not sync with windows vista since the beginning

    iPad is not talking to the windows Vista computer. Plugging the cable make bips but no recognition of the iPad. Additional iTunes locks and becomes irresponsive. Softwares loaded to many times and always showing impaled OK. Many hours lost just loading and removing softwares. No one seems to get the right detail that lock the iTunes.
    Tks

    iTunes is 10.2.2.12 they announced that the last patch should solve Vista blockages ...not on mine anyway!
    Tks

  • Syncing with Windows Vista calendar

    Hi all. I have just purchased and rec'd my iphone4. I am having problems syncing it with my calendar on my laptop which runs off windows mail not outlook. I have the latest itunes version and have also updates the windows but still nothing! A few items have appeared in my iphone calnedar but nothing new that I have added to calendar on pc.
    Can anyone please help?

    The iPhone doesn't support syncing calendar events with the Windows Calendar.
    The iPhone supports syncing calendar events with Outlook 2003, 2007, or 2010 along with syncing contacts and notes.
    The iPhone supports syncing contacts with the address book application used by Windows Mail.

  • Cannot sync with windows vista pc ?

    Tried all tips in help sections but still cannot sync !

    Like many others, most of the the workarounds I tried worked but for awhile only and/or not reliably. After more googling and trial and error, I finally ended up with a somewhat reliable solution using the below 2 changes. (I am running up-to-date Win7 with an Ipad2 and an Iphone5 both on ios 6 + and up-to-date Itunes software on the PC).
    1)  Disable IPv6 on the wireless adapter (see CKNairb's earlier post)
    2)   Create a bat file which stops and starts the "Apple Mobile Device" service, then starts Itunes
    The bat file can be placed in any dir and a desktop shortcut created to point to it in order to easily start Itunes (right-clicking properties of the shortcut and clicking "Change Icon" will even allow the selection of the Itunes icon to make it look just right :-) )
    The bat file should contain these lines:
    net stop "Apple Mobile Device"
    net start "Apple Mobile Device"
    "C:\Program Files (x86)\iTunes\iTunes.exe"
    Edit accordingly as to whether your Itunes.exe resides in \Program (x86) or \Program.
    By starting Itunes using this shortcut/bat file, you will ensure that the Mobile Device service is up and running when Itunes attempts to locate the devices wirelessly - this seems to be the key issue here.
    Although it is not 100% reliable, I would say that both devices are detected and synced 90% of the time. (Itunes will always find one of the 2 devices).
    Anyways, based on all I have gone through to get this work, I am willing to settle for "almost reliable" solution - hopefully this may work for others as well.
    Happy syncing!

  • Help, hotsync palm treo 755p to my laptop with windows vista 64 bit.

    I am computer unsavy and could use some help.  I have a palm treo 755p that previously synced with my old dell laptop.  That computer broke, and I got a new HP with windows vista 64 bit.  Previously, the dell was running windows xp.  I have bought some new software, which I have downloaded to my laptop, and am trying to sync my palm to the new computer so that I can download the program to the computer.  However, after installing the Palm Hotsync Manager and other software, and when I trying to sync, the computer does not seem to recognized my palm, and times out after a while stating "the connection between your handheld computer and the desktop could not be established.  Please check your setup and try again.
    Post relates to: Treo 755p (Sprint)

    Palm OS devices will only sync to 64bit through Bluetooth. We have a stickie concerning this. It's the third topic down under windows hotsync. Does your computer have Bluetooth?
    Post relates to: None
    Message Edited by legendeld on 11-19-2008 07:36 AM

  • Palm pro wont sync with outlook 2003 and windows device manager?

    Palm pro wont sync with outlook 2003 and windows device manager?  Files  e.g. word docs or excel files sync o.k. but i need my contacts and i only get a error that there is sporblem with my desktop computer.
    I am using vista  and i have all updates installed.
    Post relates to: Treo Pro T850U (Unlocked)

    Do you have windows mobile device center installed(WMDC)? If not download it from here http://www.microsoft.com/windowsmobile/en-us/downloads/microsoft/device-center-download.mspx
    Be sure you download the correct version for your PC. If you have 32bit OS or 64bit OS. To find this out, right click on Computer under start and select properties. Near the middle it should say 32bit or 64bit. If you know you have the correct software. Open up the control panel and go to sync settings. Right click on the partnership you have setup and select delete. On your device go to Start-->Programs-->Activesync-->Menu-->Options tap on Windows PC and select Delete. Then once both are done resetup your partnership. But this time uncheck everything. Then once it is done syncing. Go to Mobile device settings and change content sync settings and select Contact. Click save and let it sync. Do the same for calendar, tasks, and notes but leave the last item checked. So when Contacts are done syncing you go and check Calendar and leave Contacts

Maybe you are looking for