PALM TX- turns on and works with powercord connected but not once disconnected?

Hello all-
I have a PALM TX, which purchased back on 2005. It worked fine but I switched positions and my past job stop supporting. That being said, I can use now and have recently powered it up and loaded calendar, etc. However, it only works when I have the powercord connected. It works great with the connection, no problems. That being said, once disconnected from the power source it will not turn on?
I completed the soft reset multiple times. With connected to the powercord it again works fine. However, it still will not work with out the powercord?
I was reading online in various forums  and it appears it could be my power button?
Has any one else had this issue?
Any insight or assistance would be greatly appreciated as now I can use and really want to use it to its full capability.
Thank you!
Joe
This question was solved.
View Solution.

The power switch solder connections to the mother board were a bit weak on the TX line.
It sounds to me like the battery is dead.  The TX can also power on by pressing any of the front buttons.  Try pressing one of them and see if it comes on.
There are many online venues for PDA batteries and repair.  The TX battery can be user servicable, though it's a bit daunting for a novice.  If you Google "Palm TX battery replacement", many hits will be produced along with how to videos!
WyreNut
I am a Volunteer here, not employed by HP.
You too can become an HP Expert! Details HERE!
If my post has helped you, click the Kudos Thumbs up!
If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

Similar Messages

  • Windows 8.1 64bit. Webcam works with "Camera" app but not with Skype.

    I've spent a few hours googling and trying out various things - all listed below. I give up - any ideas??? OS: Windows 8.1 64bitMemory: 32GBWebCam: Microsoft VX-7000. As per subject - the webcam works with the "Camera" app but not with Skype for desktop or for Modern UI (or the Microsoft Lifecam software for that matter).  Already attempted: 1) Uninstall webcam drivers - download latest from microsoft (Windows 7) and install in Windows 7 compatibility mode.2) Close (from taskmgr) anything that looks like it might use Webcam. 3) Run Skype for Desktop in Windows 7 and 8 compatibility modes None of the above work. In Skype for Modern UI the webcam doesn't appear in the drop down in Settings - so I can't even select it. In Skype for desktops (version 6.11.32.102) the webcam is found but instead of image I get "Can't start video. Try closing other programs that might be using your webcam". I see from a bit of googling that various people seem to have the same issue (i.e. Webcam works with Camera app but not Skype) - so I'm hopeful someone has found a workaround / fix to this issue and I've just not had the googling skills to find it  Thanks, - Matt Symes

    OK - I appear to have resolved the issue.  I restricted my google terms to [vx-7000 site:microsoft.com "windows 8.1"] Which uncovered this article: http://support.microsoft.com/kb/933311 I noticed there were a couple of Windows 7 x64 specific registry settings that were mentioned so I checked these and they weren't as per the article. In fact - one of the Registry Keys was already used by other software "AI Charger+" which is some ValueAdd software that came with my motherboard. I uninstalled AI Charger+, uninstalled LifeCam driver. Reinstalled LifeCam driver in Windows 7 compatibility mode. Still not working. I returned to the registry and noticed the settings still differed from the above article. I corrected them (which involved not just amending Data but having to add new Values). I then disabled and reenabled the LifeCam from dvcmgmt.msc I was then able to get video from the webcam in the Skype for Desktop preview screen.    

  • Isight works with photo booth but not in ichat or google talk or skype?

    isight works with photo booth but not in ichat or google talk or skype?

    Hi
    Is this an Internal or External iSight ?
    In iChat, in the Video Menu (This is to the right of Buddies and may read Audio) is Camera Enabled Ticked ?
    If it reads Audio open the Connection Doctor from that same menu.
    In the connection Doctor open the Capabilities tab
    Does it say your Internet Connection is too slow ?
    At this point I would need to know which iChat Version.
    However also look in the View Menu.
    Is Show VIdeo Status ticked ?  (this shows green Icons next to your Buddy Pic and those of your Buddies
    Next go to the iChat Menu > Preferences > Video Section
    Do you see a preview here ?
    Re: GoogleTalk
    Have you enabled TALK on your Google Account Settings ?
    You need to have a Google Mail ID (Not any other sort of Google ID)
    Have you downloaded the Intel only Web Browser Plug-in to do Video in a  Web Browser.
    10:48 PM      Tuesday; August 30, 2011
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
     G4/1GhzDual MDD (Leopard 10.5.8)
     MacBookPro 2Gb( 10.6.8)
     Mac OS X (10.6.8),
    "Limit the Logs to the Bits above Binary Images."  No, Seriously

  • My firewire port works with ext hd but not with audio interface

    2010 Imac 21.5 running 10.8.5. My firewire port works with ext hd but not with audio interface. The local authorized Apple tech said that I need a new motherboard, but my firewire ext drive works perfectly. I don't understand. Thanks.

    You must go to the website of the audio interface manufacturer and look for, download and install updated drivers for the audio device you are using.
    This is not, neccessarily, an Apple issue.

  • Enterprise Mgr works with one db but not the other

    Hi
    We have two Oracle 10g databases installed. Enterprise Manager works with the second, but not the first. I believe the problem started when we migrated the host server to another network domain. Everything else works fine, but I'm getting a page load failure when attempting to access enterprise mgr.
    The second db was installed after the migration and EM works fine.
    Can anyone tell me how to reconfigure this?
    Thank you

    by any change hostname or ip was changed during migration
    also can u paste the emoms.trc ?

  • Have Sony reader 505, ADE doesn't recognize when attached to mac OX 10.6.8. works with reader library but not with ADE

    Have Sony reader 505, ADE doesn't recognize when attached to mac OX 10.6.8. works with reader library but not with ADE

    YEAY!
    I just got the solution (that worked for me, anyway) from a Sony support rep. No PC or VMWare needed.
    OK, you've installed Sony eBook Library v3, and Adobe Digital editions, you've set up your acocunts and authorized your computer on both of them, and you've authorized your Reader with the Sony Library application.
    You go to the public library ebook download page, either through the Sony Library or just through a bookmark.
    You check out a book, and open it in Adobe Digital Editions, which still won't recognize your Reader.
    BUT, in the Sony Library app, you can now click "File, Import.." and go find the pdf you downloaded with the Adobe app.
    On my Mac, it was in ~/Documents/Digital Editions
    Import it, and drag it to your Reader.
    The first time you do this, it will ask you to authorize the Reader with your Adobe ID.
    Worked like a charm.

  • Got a new LG in Anchorage and was told Glennallen, AK is in a service area.  Got home and all I get is Message 41, Roaming. Can make calls with WiFi connection but not on the road. Any idea whats going on?

    Got a new LG in Anchorage and was told Glennallen, AK is in a service area.  Got home and all I get is Message 41, Roaming.
    I can make calls with WiFi connection but not on the road. Any idea whats going on?

        Oh no! I'm sorry to hear you had problems in the are you're in AkJohnDye. I checked your coverage and I do see we have an extended 4G coverage. This means you're able to use your phone but it needs to be activated in a 4G LTE Verizon Wireless coverage zone. I apologize.
    AdaS_VZW
    Follow us on Twitter at @VZWSupport 

  • Home sharing works with one account but not another?

    My family has an apple tv, we've been having problems setting up the home sharing and tried everything. We eventually decided to try my brother's apple id instead of my mother's and it worked. So my question is; why does home sharing not work with one id but works with the other? any suggestions to get it to work with my mother's id?

    Try resetting the Apple TV. enter your mother's ID again. Then remove her ID on iTunes and re-add it. Then see if it works this time.

  • Time Machine works on Ethernet connection but not wireless

    Hi,
    This weekend I setup time machine to work with a NAS drive connected to my wireless router. If I connect my macbook to the router directly via an ethernet cable, and start a backup, it works fine. If I however try to start a backup when only on wireless it always fails. Here's what messages I'm getting:
    Starting standard backup
    Attempting to mount network destination using URL: afp://;AUTH=No%20User%[email protected]%20to%20Iomega-0cd217.afpovertcp.tcp.local/backups
    NetAuthConnectToServerSync failed with error: 64 for url: afp://;AUTH=No%20User%[email protected]%20to%20Iomega-0cd217.afpovertcp.tcp.local/backups
    Attempting to mount network destination using URL: afp://;AUTH=No%20User%[email protected]/backups
    Mounted network destination using URL: afp://;AUTH=No%20User%[email protected]/backups
    Warning: Destination /Volumes/backups does not support TM Lock Stealing
    Warning: Destination /Volumes/backups does not support Server Reply Cache
    QUICKCHECK ONLY; FILESYSTEM CLEAN
    Disk image /Volumes/backups/Garys-MacBook-Pro_xxxxxxxxxxxx.sparsebundle mounted at: /Volumes/MAC Backups
    Backing up to: /Volumes/MAC Backups/Backups.backupdb
    Stopping backupd to allow ejection of backup destination disk!
    Error: (5) getxattr for key:com.apple.backupd.SnapshotState path:/Volumes/MAC Backups/Backups.backupdb/Gary's MacBook Pro/2011-01-15-042811
    Error: (5) getxattr for key:com.apple.backupd.SnapshotContainer path:/Volumes/MAC Backups/Backups.backupdb/Gary's MacBook Pro/2011-01-15-042811
    Error: (5) getxattr for key:com.apple.backupd.SnapshotState path:/Volumes/MAC Backups/Backups.backupdb/Gary's MacBook Pro/2011-01-15-171318.inProgress
    Error: (5) getxattr for key:com.apple.backupd.SnapshotContainer path:/Volumes/MAC Backups/Backups.backupdb/Gary’s MacBook Pro/2011-01-15-171318.inProgress
    Error: (5) getxattr for key:com.apple.backupd.SnapshotState path:/Volumes/MAC Backups/Backups.backupdb/Gary’s MacBook Pro/2011-01-15-042811
    Error: (5) getxattr for key:com.apple.backupd.SnapshotContainer path:/Volumes/MAC Backups/Backups.backupdb/Gary’s MacBook Pro/2011-01-15-042811
    Error: (5) getxattr for key:com.apple.backupd.SnapshotState path:/Volumes/MAC Backups/Backups.backupdb/Gary’s MacBook Pro/2011-01-15-171318.inProgress
    Error: (5) getxattr for key:com.apple.backupd.SnapshotContainer path:/Volumes/MAC Backups/Backups.backupdb/Gary’s MacBook Pro/2011-01-15-171318.inProgress
    Backup canceled.
    [SnapshotUtilities mountPointForVolumeRef] FSGetVolumeInfo returned: -35
    Failed to eject volume (null) (FSVolumeRefNum: -179; status: -35; dissenting pid: -1)
    [SnapshotUtilities mountPointForVolumeRef] FSGetVolumeInfo returned: -35
    Failed to eject volume (null) (FSVolumeRefNum: -178; status: -35; dissenting pid: -1)
    I've x'ed out the mac address from the sparsebundle name. Any help would be much appreciated as I can't understand why it's working when connected but not when on wireless.
    Thanks!

    GT777 wrote:
    Hi,
    Hi, and welcome to the forums.
    This weekend I setup time machine to work with a NAS drive connected to my wireless router.
    Time Machine doesn't work well, if at all, with many NASs. See the pink box in #2 of [Time Machine - Frequently Asked Questions|http://web.me.com/pondini/Time_Machine/FAQ.html] (or use the link in *User Tips* at the top of this forum).
    There are several threads in the Snow Leopard > Time Machine forum with what appear to be similar problems with Iomega NASs.
    If I connect my macbook to the router directly via an ethernet cable, and start a backup, it works fine. If I however try to start a backup when only on wireless it always fails.
    An indication of a bad wireless connection or interference, but could also be the setup of the NAS or compatibility with the way the router works in wireless mode.
    Mounted network destination using URL: afp://;AUTH=No%20User%[email protected]/backups
    After an initial failure, it did connect.
    Warning: Destination /Volumes/backups does not support TM Lock Stealing
    Warning: Destination /Volumes/backups does not support Server Reply Cache
    You've posted in the Leopard forum, and didn't specify what version of OSX you're on. But those messages usually indicate that your NAS is not fully compatible with the Time Machine requirements on Snow Leopard.
    Error: (5) getxattr for key:com.apple.backupd.SnapshotState path:/Volumes/MAC Backups/Backups.backupdb/Gary's MacBook Pro/2011-01-15-042811
    Those are errors reading from the backups; specifically, getting extended attributes from the backups on your NAS (a "snapshot" is Time Machine's name for a backup folder).
    First, contact the maker of the NAS for updated software/firmware compatible with Snow Leopard.
    That might fix the problem. If not, all we can tell you is, it may be some problem with the setup of the NAS, and/or compatibility with the wireless function of your router. See the maker's instructions/Help/support.

  • Attempting to use certreq -enroll to enroll to a client authentication certificate works with Windows 8, but not with Windows 7...

    This has been an issue for a while now.  Trying to use certreq -enroll -machine [Template Name] on Windows 7 machines fails with not implemented.  When I run this command with the -q flag I see that the certificate I want is unavailable and displays:
    A valid certification authority (CA) configured to issue certificates based on this template cannot be located, or the CA does not support this operation, or the CA is not trusted.
    When I go into the properties of this certificate and goto the Certification Authority tab and check the "Show all enrollment servers" it shows my server greyed out with this message:
    The system could not determine if you can access this certificate.  Not implemented.
    The template sits on a enterprise 2003 server CA and this process works with Windows 8.1 machines.  Which means that the template has the correct permissions and is issued correctly.
    Is this a known issue with Windows 7 or am I missing something in the config?  Help is greatly appreciated.
    Thanks,

    Hi
    I have done some tests on a Windows 7 Enterprise machine and a Windows 8.1 Enterprise machine, it turns out that I have the same issue with you.
    On the Windows 7 machines, I cannot use Certreq.exe to request machine certificates, but I can successfully request user certificates, and there is no issue with the Windows 8.1 machine.
    Best Regards,
    Amy
    Interesting.  From what I can tell, there are no patches that fix this issue either...

  • IMPORT issues: Works with iMovie 3 but not iMovie 6 ???

    Okay, still trying to get my import issue resolved.
    I have a SONY HDR-HC3 DVmini.
    No problems with iMovie 3 on my Powerbook.
    iMovie 6 on my MDD will let me control the camera, but the screen stays BLUE with no IMPORT.
    My buddy thinks it might be a Quicktime issue.
    He said to download Quicktime Pro, that might resolve this issue.
    I can copy the iMovie 3 file to my machine with iMovie 6 and do the editing, just not the importing...
    THANX

    Hi
    Can be so much.
    Often Camera has to be connected to Charger/mains during Capture.
    An majority is a faulthy - badly connected FW-Cable (USB don't work at all)
    My list on this
    *NO CAMERA or A/D-box*
    Cable
    • Sure that You use the FireWire - USB will not work for miniDV tape Cameras
    FireWire - Sure not using the accompany USB-Cable but bought a 4-pin to 6-pin FW one ?
    • Test another FW-Cable very often the problem maker.
    Camera
    • Test Your Camera on another Mac so that DV-in still works OK
    • Toogle in iMovie pref. Play-back via Camera (on<->off some times)
    • Some Cameras has a Menu where You must select DV-out to get it to work
    • Camera connected to "charger" (mains adaptor) - not just on battery
    Does Your Camera work on another Mac ?
    Sorry to say it is to easy to turn the 6-pin end of the FW-cable 180 deg wrong.
    This is lethal to the A/D-chip in the Camera = needs an expensive repair.
    (Hard to find out - else than import/export to another Mac ceased to work
    everything else is OK eg recording and playback to TV)
    Connections
    • Daisy Chaining most often doesn’t work (some unique cases - it’s the only way that work (some Canon Cameras ?))
    Try to avoid connecting Camera <--> external HD <--> Mac but import directly to the Mac then move
    the Movie project to dedicated external hard disk.
    Mac
    • Free space on internal (start-up) hard disk ? Please specify the amount of free space.
    (Other hard disks don't count)
    I go for a minmum of 25Gb free space for 4x3 SD Video - and my guess is 5 times more for 16x9 HD ones
    after material is imported and edited.
    SoftWare
    • Delete iMovie pref file may help sometimes. I rather start a new account, log into this and have a re-try.
    • Any strange Plug-ins into QuickTime as Perian etc ? Remove and try again.
    • FileVault is off ? (hopefully)
    Using WHAT versions ? .
    • Mac OS - X.5.4 ?
    • QuickTime version ? (This is the heart in both iMovie and FinalCut)
    • iMovie 8 (7.1.?) ?
    • iMovie HD 6 (6.0.4/3) ?
    *Other ways to import Your miniDV tape*
    • Use another Camera. There where tape play-back stations from SONY
    but they costed about 2-4 times a normal miniDV Camera.
    • If Your Camera works on another Mac. Make an iMovie movie project here and move it
    over to Your Mac via an external hard disk.
    (HAS TO BE Mac OS Extended formatted - USB/DOS/FAT32/Mac OS Exchange WILL NOT DO)
    (Should be a FireWire one - USB/USB2 performs badly)
    from LKN 1935.
    Hi Bengt W, I tried it all, but nothing worked. Your answer has been helpfull insofar as all the different trials led to the conclusion that there was something wrong with my iMovie software. I therefore threw everything away and reinstalled iMovie from the HD. After that the exportation of DV videos (there has not been any problem with HDV videos) to my Sony camcorders worked properly as it did before. Thank you. LKN 1935
    from Karsten.
    in addition to Bengt's excellent '9 yards of advice' ..
    camera set to 'Play' , not rec/computer/etc.?
    camera not on battery, but power-line?
    did your Mac 'recognize' this camera before...?
    a technical check.
    connect camera, on, playback, fw-connected...
    click on the Blue Apple, upper left of your screen ..
    choose 'About../More..
    under Firewire.. what do you read..?
    More
    • FileVault - Secure that it’s turned off
    • Network storage - DOESN’T WORK
    • Where did You store/capture/import Your project ?
    External USB hard disk = Bad Choise / FireWire = Good
    If so it has to be Mac OS Extended formatted
    ----> UNIX/DOS/FAT32/Mac OS Exchange is NOT Working for VIDEO !
    mbolander
    Thanks for all your suggestions. What I learned is that I had a software problem. I had something called "Nikon Transfer" on my Mac that was recognizing my Canon camcorder as a still camera and was preventing iMovie from working properly. After uninstalling Nikon Transfer and doing a reboot, everything worked great.
    I never liked the Nikon Transfer software anyway--I guess I'll get a cheap card reader and use that to transfer photos in the future.
    *No Camera or bad import*
    • USB hard disk
    • Network storage
    • File Vault is on
    jiggaman15dg wrote
    if you have adobe cs3 or 4 and have the adobe bridge on close that
    or no firewire will work
    see if that halps
    DJ1249 wrote
    The problem was the external backup hard drive that is connected, you need to disconect the external drive before the mac can see the video camera.
    Yours Bengt W

  • Video works with one friend but not another?? please HELP!

    my ichat video isn't connecting with my friend christina. we've taken turns calling each other and my computer keeps saying "no data has been received in 10 seconds" i can hear the ringing and then when we go to connect thats when the message comes up and cancels the call. at the same exact time my other friend sam was online so to test out my video chat i called her. & it worked. christina also connected with sam separately & that worked. then we tried a conference where all 3 of us could chat, and sam started it and invited both of us. it worked and we could all talk & see each other. however for some reason i can't connect to just christina. what's going on?

    Hi,
    Welcome to the    Discussions
    iChat can have several messages on a failed chat.
    The "No Data for 10 Secs" one only appears on chats that connect (even if you don't see the Video)
    Basically it point to an issues between iChat at the Internet.
    The same Result can be achieved by pulling the Ethernet cable out or turning the Airport card off or powering down the modem or router.
    So we have to look at what can produce a similar break in the Internet connection without the drastic steps above.
    Some modem and router have "protection" features that will do this.
    Denial of Service (DoS) tries to make sure any data that come to your Computer does so at a rate it can handle.
    It was originally designed to protect Web Servers from "attacks" where too many requests coming to frequently used to bring servers and their Internet connections to halt.
    So Dos is threshold based,. It will cut any port that it thinks there is an "Attack" on.
    Video chats can send lots of data.
    These thresholds that are preset in the device tend to be set at Web page streaming speeds (allowing for multiple requests on popular servers) - but also at older Internet Speeds.
    Modern Speeds and things like iChat Streaming two way Video can mean that certain Buddies can send you data faster than the threshold is set for particularly with iChat 5.
    Stateful Packet Inspection (SPI) works differently but can only process a certain amount of data and will cut the port that is causing it to be overloaded making it Threshold based as well.
    There is no way to change the thresholds involved so the best course of action is to Disable the feature.
    So the Speed Sam has to send you Video may be lower than that of Christine and not bump into the threshold.
    If Sam is the Host then it the Speed of that Internet Connection that governs how fast Data is sent to you.
    One solution is to cap iChat in iChat > Preferences > Audio/Video Menu to 500kbps on the all Buddies involved.
    If this solve the issue between you and Christine then you can move on to your Modem or router.
    8:16 PM Sunday; June 6, 2010
    Please, if posting Logs, do not post any Log info after the line "Binary Images for iChat"
    Message was edited by: Ralph Johns (UK)

  • K9N2 Diamond works with X2 3800+ but not Phenomii 940 with updated BIOS

    The system in question.
    MSI K9N2 Diamond Current BIOS 7375v 2.6, have also tried 2.5, 2.4, 2.3, 2.2
    AMD Phenom II 940
    2X 2Gb Corsair CM2X2048-6400C5
    Antec True Power 750 Watt P.S.
    EVGA Nvidia GTX 260 GPU
    W.D. 300Gb HDD
    This system is about 6 months old. When I put this system together for my brother in law, he ordered the parts with the intention of using his old mobo but didn't realize it didnt support the phenom chip he ordered. SO rather than waiting for another ordered part we took a trip to our local Comp USA. K9N2 Diamond said it was phenom 2 ready, yeah ok. Anyway after a few hours of going crazy trying to figure this out for him I found out it wasn't phenom2 capable till you updated the BIOS with an older CPU. Lucky for us I use an X2 3800+ in my machine. So I popped my chip in and ipdated his BIOS with the USB drive tool. Everything seemed right with the world then.
     Now he brought the PC over for me to install Windows 7 64 bit for him. Did the install and was tracking down the few drivers Windows 7 missed and ran across Live update 4 for drivers and utilities. Should have known better but I went ahead and let it update the BIOS to 2.6. Sure enough, the CPU and GPU fans cycle on and off with no post. Check this post as his issues are identical to the ones I am experiencing. https://forum-en.msi.com/index.php?topic=133615.0 Now they never resolved this guys issue and it looks like he just RMA'd the board.
    So I started narrowing down the possible issues. First thing I did was find the MSI USB Flash Tool again and put BIOS 2.2 back on with my 3800+ back in his machine. Machine worked with every BIOS version from 2.2 to 2.6 installed with USB tool with my 3800+ in his machine but would not post at all with all BIOS versions and his phenomII. Every time his CPU is in the machine, when the power is turned on the CPU and the GPU fans both go to max RPM then turn off over and over. Cleared CMOS multiple times. I know the clear was working when I put my 3800+ in it would state the time was reset in BIOS. Pulled everything out but one stick of RAM and same thing, posts with 3800+, nothing with phenomII. Tried the other stick of RAM although it passed both a memory test with USB tool and memtest with 3800+ installed. Same. Pulled CoolMax 750W PS from my machine and put it in his. Same issues. No post with PhenomII, posts with 3800+. Now this is with NOTHING but a stick of known good RAM, PS, Mobo, CPU and CPU fan. Using onboard video. All other drives, fans, pci devices, ect are disconnected.
    So now I have 2 machines in my office all taken apart as I do not want to have to button my machine back up just to tear it back apart in case I have to do more to his Mobo with my CPU. I would rather not have to RMA the board if I do not have to like the guy in the link to the post I put up above.

    I understand the need for future proofing mainboards as much as possible. What I am not ok with is the labeling on the box stating the board is PhenomII ready when in fact it isn't ready unless you have an older CPU that you can use to flash the BIOS to make it ready. Plus, if Live Update is the POS that everyone makes it out to be on the forums, why is it the first option on MSI's website for driver and BIOS downloads? MSI's USB Flash Tool is probably one of the easiest things I have ever used to update a BIOS, why not have that as the first option?
    Anyway, I managed to talk a buddy into bringing his rig over to help me figure this out. Replaced his 965 with the 940 in question and it fired right up in an ASUS M4A785-M mobo. Tried the memory and PS in his rig as well just to triple check them and they were also good. Put his 965 in the K9N2 Diamond after making sure the BIOS was version 2.6 with the 3800+ and did not fire up with his 965 in the socket.
    So a quick recap.
    940 and 965 PhenomII will not post in the K9N2 Diamond but the 3800+ will.
    All three post in the M4A785
    tested memory by using only the slot closest to CPU in K9N2 on stick at a time. Both sticks work in the K9 with the 3800+ and both sticks work in the M4A785 with all three CPU's.
    have tried every BIOS version from 2.2 to 2.6 using the MSI USB Flash Tool with the 3800+ in the K9N2.
    Have cleared CMOS multiple times with the power cord out and holding down the On/Off switch for 20 seconds to discharge the caps before clearing. After every clear the next successful post says that the BIOS time needs to be updated.
    P.S. works on three different rigs.
    Any ideas or suggestions? If I must RMA than I must. But it works with the 3800+ so there has to be something firmware wise that is causing this.

  • AppleTV v2 works with one TV but not another... ideas?

    I just got a new TV (my girlfriend decided a 27" CRT TV was a bad idea, and got me a 24" Vizio LCD).  I already had an AppleTV hooked up to the LCD TV in the living room (I share a house with two friends).  It worked fine in the living room!
    I decided to check things out, took the AppleTV into my bedroom with all the cords, attached it to the new TV, turned it all on... and the AppleTV started up, but was completely unresponsive to the remote.  No flicker from the blue-light, nothing.  I pulled the power cord, counted twenty seconds, plugged back in... nothing.  Still no response to the remote.
    Hit the menu and down-arrow, waited ten seconds, the blue-light flickered, I released and it restarted... to give me nothing.  Still no other response to the remote.
    Turned off the TV, disconnected the HDMI cord, waited about ten seconds, reconnected the cable and turned on the TV... nothing.
    Took the ATV, with the same power cord and HDMI cable, reconnected to the older TV that it was attached to... no problem!  Just fine!
    Any ideas?  I may consider getting a second ATV for my bedroom, but if there's going to be weirdness like this I may not do it.
    I couldn't check any of the AppleTV's settings on the new TV, due to the lack of any kind of working connection, so I don't know what it was coming up as.

    I just got a new TV (my girlfriend decided a 27" CRT TV was a bad idea, and got me a 24" Vizio LCD).  I already had an AppleTV hooked up to the LCD TV in the living room (I share a house with two friends).  It worked fine in the living room!
    I decided to check things out, took the AppleTV into my bedroom with all the cords, attached it to the new TV, turned it all on... and the AppleTV started up, but was completely unresponsive to the remote.  No flicker from the blue-light, nothing.  I pulled the power cord, counted twenty seconds, plugged back in... nothing.  Still no response to the remote.
    Hit the menu and down-arrow, waited ten seconds, the blue-light flickered, I released and it restarted... to give me nothing.  Still no other response to the remote.
    Turned off the TV, disconnected the HDMI cord, waited about ten seconds, reconnected the cable and turned on the TV... nothing.
    Took the ATV, with the same power cord and HDMI cable, reconnected to the older TV that it was attached to... no problem!  Just fine!
    Any ideas?  I may consider getting a second ATV for my bedroom, but if there's going to be weirdness like this I may not do it.
    I couldn't check any of the AppleTV's settings on the new TV, due to the lack of any kind of working connection, so I don't know what it was coming up as.

  • Linksys router wrt54g works with pc laptop but not mac desktop

    i have a linksys router wrt54g. using my pc laptop i configured the router with a wep password. my pc laptop asked for the wep once and has no problems connecting everytime i turn it on. my older(powermac2,1) desktop (mac os x) asked for a wep password i entered one of the four given me by the router and it worked. on later attempts to access the router i have been unsucessful. i am asked for a wep password and when i enter it i am told the password is not correct. when i reset the router, airport has no problem connecting but i have no security. also i can't access the router online like i can with the pc laptop.
    can anyone help???
      Mac OS X (10.4.8)  

    try a "$" before your password

Maybe you are looking for

  • Video chat with non mac users

    does isight work with non-mac/ non-iChat users?

  • XML Form Doesnt change

    Dear forumpeople, I have a problem with an XML form I made a while ago. I made a simple news scenario and it all worked fine. Now I just want to add a label with some text above the form. Now when I do this and preview its shows fine, but how much i

  • Collecting Email Addresses in Dreamweaver

    I NEED HELP!!!! Can anyone PLEASE tell me specifically how I can create a f orm and collect email addresses. Actually I kinda know how to create the form, but my problem is once I create it, how do I view the email addresses that have been collected?

  • IPhoto 08 Not Launching After Install

    I tried to install the new iLife '08 Suite on my 17 ' iMac G5 (1.5 GB RAM) as an upgrade to the very old iLife 05 suite that came with my iMac. All of the applications seem to work except two --- iWeb and iPhoto. iPhoto just bounces in the dock and t

  • JSP/struts (update database)

    I am getting values form database . Pupolating the same in the jsp page, Using Iterate. Page structure (of jsp) ==>[check box] [text box] [combo] I want to enable the text & combo enabled only when i click checked the box & vice versa. because all th


HashFlare