Palm TX won't come on!

smkranz
I am a volunteer, and not an HP employee.
Palm OS ∙ webOS ∙ Android

Where does the Palm get stuck at? Also just to be sure you did a hard reset can you tell me how you did that? Reason I'm double checking is if you did a hard reset and the device is not moving past a screen there is nothing more to try

Similar Messages

  • HT1277 Mail won't come in unless I open and close mail each time! help!

    Mail won't come in unless restart "mail" each time.  IMAP cox trying to setup new email addresses....connection doctor shows mail checked and 'light' is green but mail will not display until restarting.  I know there is a simple solution, just can't see what it is! Can anyone help? I tend to make things more difficult than I need to!

    Okay, I solved the problem... FINALLY!!! Added "pop" to my email address when re-setting up account in Mail. This allowed me to set it up as a pop account and all works well!! Problem "Solved"!!

  • HT1423 the memory-access door won't come off, HELP!

    Hi,
    I have a mid-2007 iMac with 1 GB of ram and i'm trying to replace it, but the memory-access door won't come off. i loosen the screw with a screw driver but it won't open and i don't know why. i want to upgrade to 4 GB.
    is there some trick to opening it thats not stated in this article? please help me, i don't know what to do :-( i really need to get lion on this thing and can't do that without a RAM update.

    Some times there's a bit of prying in order with a thin blade.
    http://eshop.macsales.com/installvideos/imac_mid_2007_mem/

  • Certain mail won't come in off the server to my Mac Mail

    Certain emails won't come in to my Mac Mail off the Time Warner Servers. (TW is intotally unhelpful and say it's my Mac Mail settings, even though some of the senders have come in before with no problem. Newer people have a hard time getting through, even though, I put them in the address book of both the TW server, and in Mac Mail.
    I also set a preference to "allow" them in both filters section  And I'll hear a "ding" when mail arrives from this person, but while I can go see it on the TW server, it doesn't come into the Mac Mail.
    It's like it's trying (the ding) but what happens to the message?
    thanks for any info you can give.
    mz

    thanks for your help... but I've deleted all my iPhone mail accounts and reentered them. The phone then proceeded to re-download all the messages from the server...except for the same ones it wouldn't before! I'm mystified. I called ATT and they didn't know what to do either. Time Warner doesn't know either.
    I've got them in my address books as well...
    Any more ideas?
    thanks

  • IPod Touch 3G in DFU Mode and won't come out

    Hello,
    My daughter's iPod Touch 3G appears to be in DFU mode, but won't come out. The screen is completely black, and when I attach it to the computer, it comes up with the message "iTunes had detected as an iPhone in recovery mode. You must restore this iPhone before it can be used with iTunes." When I hit the restore button, I receive the error message "software for this iPhone is not currently available. Make sure you have the latest version of iTunes and try again."
    I've seen this message posted several times in the forum, and I have tried all the troubleshooting tips offered by Apple Support and in the answers to some of the questions. I am a Systems Engineer, so I consider myself pretty technically savvy. These are the steps I have followed so far:
    1) Completey removed and reinstalled iTunes according to the instructions provided by Apple.
    2) Downloaded the firmware for both the 3G and IOS4 from http://www.felixbruns.de/iPod/firmware/ and attempted a manual install - when I do this, I receive the error message, "the iPhone "iPhone" could not be restored because the firmware is incompatible"
    3) Downloaded RecBoot to attempt to exit recovery mode, but it does not appear to be detecting the iPod.
    4) Attempted to exit and re-enter DFU mode several times to no avail.
    5) Called Apple Express Lane and was willing to pay the 1 time phone support charge, however the agent told me that he could not help me, and that I needed to take the iPod into an Apple store (the iPod is 190 days out of warranty).
    My last effort is to try the install from another PC. So, prior to taking the iPod into the store, I was wondering if anyone has had any success other than the steps I have tried above. I'm appreciative for any assistance anyone is able to provide.
    Message was edited by: kander1625

    Check the model number on the back, "A1318" = 3G, "A1288" = 2G. If it truly is a 32GB 3G Touch, then you're going to have a rough time going back to an iOS version earlier than the current release (4.3.1, available from iTunes). The iOS packs you get from the site you mention are not "signed" and you probably won't be able to install them ... I think 2G owners have better luck with those "unofficial" versions.
    So, if you have a 3G, your best bet is to erase (or move) all earlier iOS versions and let iTunes download a fresh copy of 4.3.1 for the iPod -- no need to go to a 3rd party site. If you have a 2G, then the latest version you can install is 4.2.1, which is also available from iTunes. To increase your odds of this working out, you might temporarily disable any AV software and firewall(s).

  • When I plug my iPod into the computer, itunes won't come up on the screen and my iPod is not recognized anymore and it use to be. Please help because I can't sync it at all because it won't show up as a device

    When I plug my iPod into the computer, itunes won't come up on the screen and my iPod is not recognized anymore and it use to be. Please help because I can't sync it at all because it won't show up as a device on the right hand side of itunes.

    Try
    iOS: Device not recognized in iTunes for Windows
    I would start with              
    Removing and Reinstalling iTunes, QuickTime, and other software components for Windows XP
    or              
    Removing and reinstalling iTunes and other software components for Windows Vista, Windows 7, or Windows 8
    Before you reinstall the Apple software, also remove iCloud vi Control Panel Remove programs. The reinstall the Apple programs
    New cable and different USB port?
    Runs this and see if the results help with determine the cause
    iTunes for Windows: Device Sync Tests
    Try on another computer to help determine if computer or iPod problem

  • How Do I Wipe Data from a BB Curve that won't come on?

    My BB Curve died yesterday on me and it was under warranty. To get the $160 credit for it under the warranty plan, I need to send it back.  The problem is that it has all kinds of data on it... account numbers, personal information (birthdates, addresses, numbers, etc.) of 800 people in the  directory,
    But since it  won't come on, I'm stumped. How do I wipe it? I've tried changing the battery out time and again, I've tried connecting the charger with and without the battery, I've tried connecting the data cable to maybe access the phone to wipe it--all to no avail. 
    The pop-up I get when I plug it into my computer says: "USB Device Not Recognized." 
    Short of applying a hammer to it (in which case I lose the warranty), how do I reliably wipe the data from it?
    Please advise. 
    Thank you,

    Hello agunodm
    Welcome to BlackBerry Support Forums
    If you're device is dead then its not an easy task to wipe that device , But there are a few methods and some third party software which you can use to wipe and if succesful you may be able to recover your device also .
    At first I suggest try this Kmowledge Base, if you're successful then it will delete all data within your device and also will get your device working :
    KB27956 :  How to recover a BlackBerry smartphone from any state
    Or you can try JL_Cmder , which you can find it here http://www.blackberryfreaks.com/JL_Cmder.html
    So try it and let us know .
    Click " Like " if you want to Thank someone.
    If Problem Resolves mark the post(s) as " Solution ", so that other can make use of it.

  • Toner won't come out LaserJet Pro 400 MFP M425

    toner won't come out LaserJet Pro 400 MFP M425. It's stuck inside.

    I am sure it is stuck on the right side.  Odds are also that it is an aftermarket toner and not an hp original.  That said it will not be easy to remove.  You will have to do a google search for the service manual.  The right side cover needs to come off and it is not easy since the back, top and control panel need to come off.  Once you have the right side cover off you will see a big while gear behind the metal plate that holds the gear assembly to the right side.  You need to turn that gear by hand a little and it should free up the toner to come out.  When you remove the toner you will see a sort of bell housing metal piece that hangs on the right side of the toner.  That assembly fits down the right side and locks into the mech that turns the toner drum.  If that piece has defect it gets stuck.  Good Luck.  First thing I would try is to unplug the printer, then plug the printer back in and let it come to ready and open the door to see if the toner now comes out.  Sometimes turning the printer off and then back on will turn that gear by itself and free that piece.

  • After upgrading to mavericks my mac shut off and won't come back on

    I upgraded to Mavericks and my 2013 macbook pro shut off and won't come back on.  When I push the start button I can hear the chime and then my sleep light blinks really fast and then shuts off completely.  All I get is a white screen with the loading circle just going around and around.  I tried resetting the pram but that didn't work.  Any ideas?

    Reinstalling OS X Without Erasing the Drive
    Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
    Reinstalling OS X Without Erasing the Drive
    Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
    When the recovery menu appears select Disk Utility and press the Continue button. After Disk Utility loads select the Macintosh HD entry from the the left side list.  Click on the First Aid tab, then click on the Repair Disk button. If Disk Utility reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit Disk Utility and return to the main menu.
    Reinstall OS X: Select Reinstall OS X and click on the Continue button.
    Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
    Alternatively, see:
    Reinstall OS X Without Erasing the Drive
    Choose the version you have installed now:
    OS X Yosemite- Reinstall OS X
    OS X Mavericks- Reinstall OS X
    OS X Mountain Lion- Reinstall OS X
    OS X Lion- Reinstall Mac OS X
         Note: You will need an active Internet connection. I suggest using Ethernet
                     if possible because it is three times faster than wireless.

  • HT4623 My ipad keeps crashing & now it won't come back on, just comes up to connect to itunes. Did that and tried a restore but just keeps comin up an unknown error, help please, I have so much on my ipad.

    My ipad keeps crashing and this time it won't come back on it just keeps telling me to connect to itunes which I did and it just keeps telling me it can't restore this ipad because an error has occured! Really need help please?

    If it keeps coming up with an unknown error - no error code given - try another computer. If that doesn't work, it's time to take it to an Apple Store or an authorized service center to have the device evaluated.

  • HT201263 well i was listening to music on my iphone and then it just stopped and now it won't come back on.  i tried resetting it alot and nothing i mean nothing comes on!  i tried recharging too and nothing and tried connecting it to itunes and nothing!

    well i was listening to music on my iphone and then it just stopped and now it won't come back on.  i tried resetting it alot and nothing i mean nothing comes on!  i tried recharging too and nothing and tried connecting it to itunes and nothing! Help? what can i do?

    http://support.apple.com/kb/TS3281

  • I had to reinstall iTunes cause during update it was shut off by mistake, now it won't come up and says,"The file "iTunes Library .itl" cannot be read because it was created by a newer version of iTunes", what do I do?

    I had to reinstall iTunes cause during update it was shut off by mistake, now it won't come up and says,"The file "iTunes Library .itl" cannot be read because it was created by a newer version of iTunes", what do I do?

    Empty/corrupt library after upgrade/crash
    Hopefully it's not been too long since you last upgraded iTunes, in fact if you get an empty/incomplete library immediately after upgrading then with the following steps you shouldn't lose a thing or need to do any further housekeeping. In the Previous iTunes Libraries folder should be a number of dated iTunes Library files. Take the most recent of these and copy it into the iTunes folder. Rename iTunes Library.itl as iTunes Library (Corrupt).itl and then rename the restored file as iTunes Library.itl. Start iTunes. Should all be good, bar any recent additions to or deletions from your library.
    See iTunes Folder Watch for a tool to catch up with any changes since the backup file was created.
    When you get it all working make a backup!
    tt2

  • MacBook Pro 2012. Replaced hard drive yesterday by apple. Went home working and now it turns off and won't come back on till I plug it in... Help!

    Have had a ton of issues with my Mac. Went to the apple store in march and they said my processor could be going bad and they basically did nothing. Yesterday I was using my computer put it to sleep. 10 minutes later I opened it up and it completely crashed. Drove 2 hours to get to apple because I am away at school and need my computer for finals. They replaced my hard drive and it was working perfectly fine till today. Now it turns on and works and then shuts off and it won't come back on till I plug it in. It's completely charged and I need it for my classes. I have apple care but I can't keep driving back to apple every day. I have a apple appointment tomorrow but this is ridiculous. Has anyone had any of these issues? What's it going to take for them to replace my computer I can't even live a day without it right now. And by the way. I could not even get any of my data off my old hard drive. So basically nothing is on this computer right now.

    Kak4k8 wrote:
    I have apple care but I can't keep driving back to apple every day. I have a apple appointment tomorrow but this is ridiculous. What's it going to take for them to replace my computer I can't even live a day without it right now.
    Let them know how this is inconveniencing you.  For a replacement, I believe Apples general rule of thumb is if it comes in for the 3rd time for the same issue they will replace it, but it may vary by store.  It cant hurt to ask for a replacement.

  • Printer connected to Airport Express USB port won't come online after firmware 7.6 upgrade. I've tried backing up to 7.5.2, but it still shows offline. It is a Canon iP4600 printer and I'm running OS 10.6.8. I've powered everything down and still no go.

    Printer connected to Airport Express USB port won't come online after firmware 7.6 upgrade. I've tried backing up to 7.5.2, but it still shows offline. It is a Canon iP4600 printer and I'm running OS 10.6.8. I've powered everything down and still no go. I've connected the printer directly to my MacBook's USB port and it works fine. Any suggestions?

    I have an iP4500, which I assume is quite similar to your model.
    I had to reset the printing system to get things printing again. Only takes a few minutes and no problems at all since I did it a week ago or so.
    Plug the printer into the USB port on the Express and restart the printer.
    Open System Preferences (gear icon on the dock) and then open Print and Fax
    Right-Click in the printer area on the left and select Reset Printing System
    Then click the + (plus) button at the bottom of the printer list to install the printer again.

  • I updated Efi firmware, but force quit twitter to install. Now system won't come on, it just shows grey screen with the spinning wheel loading. I am running lion 10.7.3

    I updated Efi firmware, but force quit twitter to install. Now system won't come on, it just shows grey screen with the spinning wheel loading. I am running lion 10.7.3.
    Thank you

    The following support article is somewhat outdated. Where it refers to booting from an installation disc, you should boot from your recovery partition (if running 10.7 or later) by holding down the key combination command-R at the chime.
    Mac OS X: Gray screen appears during startup

Maybe you are looking for