Panning Doesn't work

Occaisonally I find that I can't pan tracks. It worked in other projects with the same effects, instruments and audio clips, etc, but no in others. No matter how far I pan to one side I still get a center mix and it bounces down as a center mix. Any ideas why? Thanks.

Hi,
Then when you "bounce" the track,double-check your settings.Maybe the issue is there?
Otherwise,do some test bouncing with only two instuments that are completely different (vocal/ac gtr for example) and pan them hard left/right.And do some experimenting until you find the issue.
Cheers

Similar Messages

  • The ADF Mobile preview pane doesn't work under Windows 8.

    The ADF Mobile preview pane doesn't work under Windows 8 64bit even I use Jdeveloper version 11.1.2.4.0,but I use windows 7 64bit or windows xp works fine.
    How to fix it, please.
    Thanks !

    Hi,
    I installed JDeveloper 11.1.2.4 on my Windows 8 machine and then the ADF Mobile extension. I can open the previewer for ADF Mobile. So there is no problem with this on Windows 8. I used the generic installation, which is that I installed the JDK and then run the Java -jar command for the JDeveloper install.
    Frank

  • Navigation Pane Doesn't Work

    For some reason, the Navigation Pane in my MS Word doesn't work.  I usually use the toggle from my quick access toolbar to toggle it on and off.  It worked fine last night.  This morning, I open the document and I hit Ctrl F to see the Navigation
    Pane, but MS Word didn't respond.  I tried to toggle in the quick access toolbar and there was no response.  I went to the View and I tried the Navigation Pane toggle, but there was nothing.  Anyone know how I can bring the Navigation Pane back?

    Hi David,
    Please also try deleting the Word Data registry subkey to see if the problem was caused by a damaged Word Data registry key.
    Note When you delete the Word Data registry subkey, Word resets several options to their default settings. For example, Word resets the "most recently used file" list on the
    File menu. Also, Word resets many settings that you customize in the
    Options dialog box.
    1. Exit all Office programs.
    2. In Windows 8 or Windows 8.1, swipe in from the right edge of the screen, and then tap
    Search. (If you're using a mouse, point to the upper-right corner of the screen, move the mouse pointer down, and then click Search.) Type
    regedit in the search box, tap or click Apps, and then tap or click
    Run.
    Or, in Windows 7, Windows Vista or Windows XP, click Start, click
    Run, type regedit, and then click OK.
    3. Locate the following registry subkey, as appropriate for the version of Word that you are running:
    Word 2013
    HKEY_CURRENT_USER\Software\Microsoft\Office\15.0\Word\Data
    Word 2010
    HKEY_CURRENT_USER\Software\Microsoft\Office\14.0\Word\Data
    Word 2007
    HKEY_CURRENT_USER\Software\Microsoft\Office\12.0\Word\Data
    Word 2003
    HKEY_CURRENT_USER\Software\Microsoft\Office\11.0\Word\Data
    4. Click Data, and then click Export on the
    File menu.
    5. Name the file Wddata.reg, and then save the file to the desktop.
    6. On the Edit menu, click Delete, and then click
    Yes.
    7. Exit Registry Editor.
    8. Start Word.
    Please let me know the result.
    Regards,
    Steve Fan
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.
    Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact
    [email protected]

  • Help! My pan doesn't work..

    I have a PreSonus inteface and Logic pro 9 . Everything works great except when I pan
    tracks I hear no panning going on. The display appears to be panning the track but
    it is not happening audibly, not on my headphones either.
    This is probably something so easy to do that I am overlooking. Please advise!

    tenorhighc wrote:
    I have a PreSonus inteface and Logic pro 9 . Everything works great except when I pan
    tracks I hear no panning going on. The display appears to be panning the track but
    it is not happening audibly, not on my headphones either.
    This is probably something so easy to do that I am overlooking. Please advise!
    It's déjà vu all over again!
    http://discussions.apple.com/thread.jspa?threadID=2541466&tstart=45
    See if this helps.
    pancenter-

  • 'Options..' button in Airport Preference Pane doesn't work.

    While in the Network preference pane located within your System Preferences, if you double-click on Airport while in the Network Status view, there is a 'Options...' button at the bottom of the screen. For a while now, after clicking on this button, nothing happens. Does it work for anyone else?

    According to Adobe they have a bug fix in with Apple. I think it relates to iOS 8. I do not know if any progress has been made. I am very much looking forward to this being fixed as well. In the meantime it looks like my current folio in production is going to be heavy in file size.  I wonder if any progress has been made?

  • Why Detect Displays doesn't work anymore?

    I use my PB to watch movies using my TV and the S-Video to RCA cable, but since the last upgrade 10.4.6 the Detect Displays option (in display menu bar AND preference pane) doesn't work.
    The TV shows a dimmed image of what's suppose to show and sometimes it appears vertically distorted.
    I disconnected the S-Video cable and restarted the PB but it still shows that "something" is connected to the s-video port.
    Which files should I delete to "reset" video preferences?
    UPDATE: PRAM reset didn't work...
    Thanks in advance

    Well, the cable can't be the problem, because the computer is "stuck" with a two monitor configuration, even without the cable plugged in, that's why im guessing there's some kind of switch (i hope) that i can reset so the mother board stops thinking i have another display plugged.... the second problem is that if i plug the s-video to rca cable (that came with the laptop) i can't get a clear tv signal from it... it's distorted.... i'll probably open up the computer and check the s-video port... wish me luck.

  • Scrollable content (pan option) with hyperlink doesn't work

    Hello, I'm trying to layout a page to scroll horizontaly with an hyperlink to a web site. I've followed the steps given in the digitalpubsuite_help.pdf (Page 51 - Last updated 1/25/2012).
    After grouping the image and the hyperlink, I cut it and I paste it into my container frame, but it's there when my container frame doesn't show me the Pan option in the folio builder (it's desactivated) and it remains with the option Web Content active.
    So, I tried to do the same thing, but using a button instead of an hyperlink, but it doesn't work either. And in this case I have the message 'content generation error: invalid URL for web content overlay' when I try to update my article.
    Could somebody help me to figure out why this is happening? What am I doing wrong? Thank you

    No, it takes this property (web content overlay) once I paste the content into the frame. I also noticed that when I group my image with the hyperlink all my group become an hyperlink. I've already reseted it as you say but it didn't work!!!!

  • Preference panes - cannot open because it doesn't work on an intel-based mac.

    Just updated to Mavericks and was checking out "System Preferences". Of the 37 items I have here 19 will not open. The error messages I get are alternately:
    "Could not load <....> preference pane"
    "You can’t open <....> preferences because it doesn’t work on an Intel-based Mac."
    (<....> = name of preference pane)
    Clicking on a pane will give one message, then, once "OK" has been clicked, clicking again on the same pane will give the second. There does not seem to be any correlation between when a particular message will occur, but it is always the same panes with the issue.
    Ths was initially a upgrade install over the latest Mtn Lion, but I've just completed a repair and restore on the os with a fresh download, with no change.
    I am running a mid-2009 macbook pro.
    If anyone knows what is going on here and could suggest a solution ...!
    Panes with the issue:
    Security & Privacy; Notifications; Printers & Scanners; iCloud; Internet Accounts; Network; Sharing; Users & Groups; Parental Controls; Date & Time; Dictation & Speech; Time Machine; Accessibility; Startup Disk; an

    I had the same issue after restoring a cloned drive with Mavericks.
    Repairing permissions didn't help.
    Show invisible files and go to /Applications - you will see a bunch of corrupt application starting with .0
    For example i had
    .0Messages
    .0System Preferences
    .0Time machine
    The wrong System Preferences was getting launched when calling it from the menu - the corrupt one.
    I deleted them and all is good.
    Also if this doesn't work, select Applications/System preferences and call Get Info from the File menu and make sure 32 bit mode is not activated.

  • Preview of Ken Burns effect doesn't work with some pictures

    I just recently installed a new graphics card (ATI Radeon 7500) on my Sawtooth, 1.2 GHz, so I could utilize the Ken Burns effect in imovie HD. It works but only partly. It works great but with some pictures the preview pane doesn't show the photo. What I see is a what looks like bad reception on an old TV (fuzzies and the picture is distorted so bad you can't even make it out). With other pictures the preview shows up fine. I'm sure I've loaded the drivers. What else can I do?

    Hi Tonyy13.
    I am presenting the same problem. I can set the Ken Burns' effect while I am with the pictures before placing them in the Clip or Timeframe viewer. After placing them there, if I try to edit the picture (either by right clicking and choosing -edit picture or by control clicking and doing the same, I ended up with a black background. If you change the setting in this black ackground and update this changes they will be effective. So, you can change the slide duration, and everything in the sliders but without an image.
    I was running System 10.3.9 and I thought this was the reason. Today, I went and bought Tiger but it didn't sove the problem. I do believe it is a bug in the program. According to Apple's Help and David Pogue's "The Missing Manual" this shouldn't happen.
    If you solve this problem reply to this posting. If I did I will reply to your posting. Thank You.

  • DVI to HDMI doesn't work with Panasonic Monitor

    Hi all,
    I have a Panasonic monitor, model TH-50PX75U that we've used with my Macbook Pro.  I have an DVI (large style) to HDMI cable that we connect the Macbook with, and it works fine.
    I also have a MacPro that I want to use this monitor with. It has 1 full size DVI display port and 2 mini display ports.  In the past I've used the DVI and one mini port to connect 2 monitors at once one the MacPro and it has worked fine.
    I tried  connecting the Panasonic monitor to use on my mid 2012 MacPro  but I never get a picture.  I reconnected one of the other monitors to a mini dispplay port and can see that the MacPro recognizes the Panasonic monitor.  Both monitors show up in the Display section under System Preferences.  I've tries various settings for the Panasionic monitor but I can never get anything to display on it.
    What am I missing here?  The MacPro is a mid 2012 with 3.2Gig Quad Core / 6 Gig ram / Radion 5770 graphic card, and runs ML 10.8.3.
    Any advise is appreciated.
    Thanks!
    Ray

    Ok, so I had time to do some testing and here's what I've done:
    I plugged in my Macbook which does work on the Pana monitor, and looked at the Profile.  I then compared it to the Profile on the Mac Pro.  There are some differences which I'm guessing have to do with different HW.  I'm going to include some photos of the working and not working monitor scenarios do you can see what I'm seeing. 
    Does anyone have any suggestions as to how to make this work?
    Photo1: Shows the Macbook and the Pana monitor together using DVI to HDMI cable to connect the two.
    Photo2: Shows the display settings with the small monitor and Pana connected to Mac Pro.  Notice there are no numbers in the diplays. Mirroring them doesn't work either.  The small monitor is using a DVI to mini port adapter to connect to the graphics card, the Pana is using an HDMI to DVI cable (same one I used with the Macbook) to connect to the DVI port of the graphics card.
    Photo3: Both monitors are on.  The Mac Pro knows the Panasonic is there but I never get a display on it.
    Message was edited by: Rayzorx

  • File.delete() and File.deleteOnExit() doesn't work consistently..

    I am seeing some odd behavior with trying to delete files that were opened. Usually just doing new File("file.txt").delete() would work. However, in this case, I have created an input stream to the file, read it in, saved it to another location (copied it), and now I am trying to delete it.
    The odd thing is, in my simple application, the user can work with one file at a time, but I move "processed" files to a lower pane in a swing app. When they exit it, it then archives all the files in that lower pane. Usually every file but the last one opened deletes. However, I have seen odd behavior where by some files don't delete, sometimes all of them wont delete. I tried the deleteOnExit() call which to me should be done by the JVM after it has released all objects such that they don't matter and the JVM ignores any object refs and directly makes a call (through JNI perhaps) to the underlying OS to delete the file. This doesn't work either.
    I am at a loss as to why sometimes some files delete, and other times they don't. In my processing code, I always close the input stream and set its variable to null. So I am not sure how it is possible a reference could still be held to the object representing the file on disk.

    and then, in the other class
      public int cdplayerINIToMMCD(File aDatabase, String thePassword) throws IllegalArgumentException {
         /*---------DATA---------*/
         String dbLogin, dbPassword;
         JFileChooser fc;
         INIFileFilter ff;
         int dialogReturnVal;
         String nameChosen;
         File INIFile;
         ProgressMonitor progressMonitor;
         BufferedReader inFileStream;
         String oneLine;
         int totalLines = 0;
         int linesParsed = 0;
         boolean openDBResult;
         int hasPassword;
         if ((aDatabase == null) || (!aDatabase.exists()) ||
            (FileManagement.verifyMMCD(aDatabase) == FileManagement.VERIFY_FAILED)) {
            throw new IllegalArgumentException();       
         else { 
            currentDB = aDatabase;
            if(thePassword == null) {
              dbPassword = "";
            else { dbPassword = thePassword; }
            dbLogin = dbPassword; //For MSAccess dbLogin == dbPassword
         //Ask the user for the cdplayer.ini file.
         //Create a file chooser
         if (System.getProperty("os.name").indexOf("Windows") > -1) {
            fc = new JFileChooser("C:\\Windows");
         else {
            fc = new JFileChooser();     
         fc.setMultiSelectionEnabled(false);
         fc.setDragEnabled(false);
         //Create a new FileFilter
         ff = new INIFileFilter();
         //Add this filter to our File chooser.
         fc.addChoosableFileFilter(ff);
         fc.setFileFilter(ff);
         //Ask the user to locate it.
         do {
            dialogReturnVal = fc.showOpenDialog(mainFrame);
            if (dialogReturnVal == JFileChooser.APPROVE_OPTION) {
               nameChosen = fc.getSelectedFile().getAbsolutePath();
               if(nameChosen.toLowerCase().endsWith(INIFileFilter.FILE_TYPE)) { INIFile=new File(nameChosen); }
               else { INIFile = new File(nameChosen+INIFileFilter.FILE_TYPE); }
               if (!INIFile.exists()) {
                  continue; //If the name specified does not exist, ask again.
               else { break; }
            else { //User clicked cancel in the open dialog.
               //Ignore what we've done so far.
               return(IMPORT_ABORTED);
         } while(true); //Keep asking until cancelled or a valid file is specified.
         //Determine how many lines will be parsed.
         try {
           //Open the INI for counting
           inFileStream = new BufferedReader(new InputStreamReader(new FileInputStream(INIFile)));
           while ((inFileStream.readLine()) != null) {
               totalLines++;
           //Close the INI file.
           inFileStream.close();
         } catch (IOException ex) { return(IMPORT_FAILED); }
         //Make a progress monitor that will show progress while importing.
         progressMonitor = new ProgressMonitor(mainFrame, "Importing file","", 0, totalLines);
         progressMonitor.setProgress(0);
         progressMonitor.setMillisToPopup(100);
         progressMonitor.setMillisToDecideToPopup(1);
         //Make our DatabaseHandler to insert results to the database.
         dbh = new DatabaseHandler();
         //Open the database connection.
         do {
           try {
              openDBResult = dbh.openDBConnection(currentDB, dbLogin, dbPassword);
           } catch(JDBCException ex) { return(IMPORT_JDBC_ERROR); } //OUCH! can't write anything.
             catch(SQLException ex) {
                 openDBResult = DatabaseHandler.OPNCN_FAILED;
                 //Can not open the database. Is it password protected?
                 hasPassword = JOptionPane.showConfirmDialog(mainFrame, "Could not open the database. "+
                                                "The password is wrong or you have not specified it.\n"+
                           "Do you want to enter one now?", "New password?", JOptionPane.YES_NO_OPTION);
                if (hasPassword == MMCDCatalog.DLG_OPTN_YES) {
                   dbPassword = JOptionPane.showInputDialog(mainFrame, "Please enter your "+
                                                              "password for the DataBase:");
                    dbLogin = dbPassword; //For MSAccess, login == password                                                    
                //If the password wasn't the problem, then we can't help it.
                else { return(IMPORT_FAILED); }
         } while(openDBResult != DatabaseHandler.OPNCN_OK); //If it is OK, no exception thrown.
         //Import the ini file
         try {
            //Open the INI file for parsing.
            inFileStream = new BufferedReader(new InputStreamReader(new FileInputStream(INIFile)));
            //Read and parse the INI file. Save entries once parsed.
            while ((oneLine = inFileStream.readLine()) != null) {
               parseLine(oneLine);
               linesParsed++;
               progressMonitor.setNote("Entries imported so far: "+entriesImported);
               progressMonitor.setProgress(linesParsed);
               if ((progressMonitor.isCanceled()) || (linesParsed == progressMonitor.getMaximum())) {
                  progressMonitor.close();
                  break;
            //Close the INI file.
            inFileStream.close();
         } catch (IOException ex) {
              //Make absolutely sure the progressMonitor has disappeared
                progressMonitor.close();
                if (dbh.closeDBConnection() != DatabaseHandler.CLSCN_OK) {
                 JOptionPane.showMessageDialog(mainFrame, "Error while reading the INI file.\n"+
                    "Error while attempting to close the database", "Error", JOptionPane.INFORMATION_MESSAGE);
              else {
                 JOptionPane.showMessageDialog(mainFrame, "Error while reading the INI file.",
                                                    "Error", JOptionPane.INFORMATION_MESSAGE);     
                return(IMPORT_FAILED);
         //Make absolutely sure the progressMonitor has disappeared
         progressMonitor.close();
         //Close the database connection
         if (dbh.closeDBConnection() != DatabaseHandler.CLSCN_OK) {
            JOptionPane.showMessageDialog(mainFrame, "Error while closing the database after import.",
                                          "Error", JOptionPane.INFORMATION_MESSAGE);
         //Did the user cancel?
         if (totalLines != linesParsed) {
            return(IMPORT_ABORTED);     
         //Success!
         //Everything ok. Return the number of entries imported.
         return(entriesImported);
      }

  • Ever since upgrading to Mavericks, Adobe Flash Player doesn't work.

    I upgraded from Snow Leopard to Mavericks recently and since then, sites do not recognize that I have Adobe Flash Player installed at all. I currently have the most updated version: "Plug-in version 11.9.900.170 is installed." I noticed this when family and friends sent me e-cards. I go to the sites to view them and it tells me I need to download Adobe Flash Player.
    I have uninstalled it twice and downloaded it twice. Installation is always successful and complete but when I test it to view an e-card sent to me from a reliable site, it still states that I need to install it to view the card. I HAVE IT!! lol  I don't understand why the sites are not recognizing it on my computer.
    I've tested it out on both Safari and Firefox and it doesn't work on either. Safari is 7.0.1 (current).
    Can anyone help me fix this? Troubleshooting on Adobe Flash Player basically tells me to uninstall and re-install. Still doesn't help. ~sigh~
    Thanks in advance for any help!

    If you're sure you've installed the latest version of Flash, take each of the following steps that you haven't already tried. After each step, relaunch Safari and test. For a "missing plug-in" error, start with Step 5.
    Step 1
    If you're only having trouble with YouTube videos, sign in to your YouTube account and load this page. You may see a link with the text "Leave the HTML5 Trial." If so, click that link.
    Step 2
    If you're getting a "blocked plug-in" error, then from the menu bar select
     ▹ System Preferences… ▹ Flash Player ▹ Advanced
    and click Check Now. Quit and relaunch your browser.
    Step 3
    Triple-click anywhere in the line below on this page to select it:
    /Library/Internet Plug-Ins
    Right-click or control-click the highlighted text and select
    Services ▹ Open
    from the contextual menu.* A folder should open. Delete the following item, or anything with a similar name, if present:
    Flash Player (failing).plugin  
    You may be prompted for your login password.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combinationcommand-C. In the Finder, select
    Go ▹ Go to Folder...
    from the menu bar, paste into the box that opens (command-V). You won't see what you pasted because a line break is included. Press return.
    Step 4
    Re-download and reinstall Flash. Download it from the domain "get.adobe.com". Don't click a link from any other website, including this one, because you can't trust links. They may be an attempt to trick you into installing malware masquerading as Flash. Type the address into the browser window. Never download a Flash update from anywhere else.
    Step 5
    If you get a "missing plug-in" error, select
    Safari ▹ Preferences... ▹ Security
    from the Safari menu bar and check the box marked
    Allow (or Enable) plug-ins
    Then click the button marked
    Manage Website Settings...
    if present and make sure that the website is not blocked for Flash.
    Step 6
    Select
    Safari ▹ Preferences... ▹ Extensions
    from the Safari menu bar. If any extensions are installed, disable them.
    Step 7
    In the Safari preference window, select
    Privacy ▹ Remove All Website Data
    Close the window. Then select
     ▹ System Preferences… ▹ Flash Player ▹ Advanced
    and click Delete All. Close the preference pane.

  • I use iMac OS 10.6.8 (uptodate Snow Leopard) with Firefox for Mac 23.0.1. Online and at other times, my number pad doesn't work. Is there a 'Num Loc/unloc' on the keyboard?

    On line or otherwise, my number keypad doesn't work, then I get a 'freeze.' Number keypad works durning sign in.
    I use Mac keyboard (original equipment).

    Hi, sometimes Shift+clear works as numlock.
    Also open System Preferences>Universal Access>Keyboard tab, & see if Sticly keys is on.
    One way to test is to Safe Boot from the HD, (holding Shift key down at bootup), run Disk Utility in Applications>Utilities, then highlight your drive, click on Repair Permissions, Test for problem in Safe Mode...
    PS. Safe boot may stay on the gray radian for a long time, let it go, it's trying to repair the Hard Drive
    Reboot, test again.
    If it only does it in Regular Boot, then it could be some hardware problem like Video card, (Quartz is turned off in Safe Mode), or Airport, or some USB or Firewire device, or 3rd party add-on, Check System Preferences>Accounts (Users & Groups in later OSX versions)>Login Items window to see if it or something relevant is listed.
    Check the System Preferences>Other Row, for 3rd party Pref Panes.
    Also look in these if they exist, some are invisible...
    /private/var/run/StartupItems
    /Library/StartupItems
    /System/Library/StartupItems
    /System/Library/LaunchDaemons
    /Library/LaunchDaemons

  • DHCP & self-assigned IP problem-Airport doesn't work

    I'm not really a technical type, but I'm pretty quick to pick things up and several weeks of trying to deal with this issue has made me pretty knowledgeable about things related to it specifically.
    Background:
    I have a month-old Macbook Pro that runs Snow Leopard and is up to date on all its software stuff. On our home network we have another pretty new Macbook Pro running 10.5.9 and a fairly old Macbook also running 10.5.9.
    We have a Linksys WRT54G wireless router. Our network uses a 40-bit Hex WEP password.
    Problem(s):
    When I try to connect to our wireless network, Network preferences tells me that it cannot connect because of a self-assigned IP address. Sure enough, the IP address DHCP comes up with is of the 64.XX.XX.XX variety. Google's revealed that this is a common problem for all recent versions of OSX, back to at least Tiger.
    The "subnet mask" it comes up with is 255.255.0.0, which is different from the settings on our other (working) computers, which is 255.255.255.0. I'm not sure what this means, or whether it's significant. Renewing the DHCP lease either comes up with the same 64.XX.XX.XX type or, sometimes, it comes up with no IP settings at all. The most frustrating thing about this is that if I chose "DHCP with manual address" and type in any in our set that I've confirmed isn't in use and hit "apply", as soon as I go back to the panel it has reverted to the 64.XX.XX.XX type.
    I've also tried manually entering the router/subnet mask/IP data, as well as the DNS numbers, and that leads to the Network Settings connectivity dot thing being green, but the internet still doesn't work. In those cases, diagnostics claims that everything is fine up to and including the ISP, but that it's unable to connect to the server and internet.
    Of note: some people with a similar problem have talked about networks with this problem working intermittently, but mine seems to be consistently broken.
    Initially I was able to avoid fixing the problem by using our neighbors' unsecured wireless network, which is sort of awful, I know, but at least it kept me from having to deal with this for a while. Today it started to do the same thing to that network. Both networks continue to work on our Macbook and other Macbook Pro, which is why I don't think that it's a router problem.
    I've been able to connect to our other computers through computer-to-computer networks—going through our main shared network (and thus the wireless router) doesn't seem to work—which I think shows that the Airport card/hardware itself is intact (?). I did try connecting to the internet through the "internet sharing" option on our Macbook, but that had the exact same problems.
    Another thing that may or may not be relevant, but is equally infuriating:
    I've also noticed that my Macbook Pro has more trouble staying connected to a network than our Macbook—even when it was working, it disconnected/timed out extremely often, which is something our Macbook never does, even from the same location. When I try to connect to a network it spends a very long time displaying the "searching for network" animation in the menu bar icon, sometimes after the Network Preferences pane believes that it's connected, and sometimes even after I hit the button to turn Airport off. It's also started refusing to connect to any networks at all, on occasion, which is especially evident in the process of the diagnostics box thingy, because there it actually tells me it's unable to connect rather than just playing the searching animation for ages.
    Here are some other things that I've tried:
    setting up a new 'location'
    restarting the computer
    deleting the airport preferences file
    restarting in safe mode
    restarting open firmware
    confirming that the firewall allows all incoming thingies
    resetting the router
    making sure the keychain password allows all applications to access it
    connecting to the internet through a computer-to-computer network from another machine
    Because the situation has deteriorated over time, I'd also like to know whether people think that it's two problems (the type of router then later the airport hardware(?)/software(?) itself, perhaps) or just one. Since I've tried basically everything besides switching out our router, I'm kind of inclined to blame it on that, especially because one of the more plausible explanations for this problem that I've heard is a time-out error due to Airport expecting a faster response than it's able to get from older routers; however, the fact that other networks haven't been working means that it's not likely to be just the router. If it's just one problem, which is the simpler explanation, then I guess there's something properly wrong with my computer's software, in which case I guess I'll take it to the Apple Store. :/
    I'm in love with my computer otherwise, and I'll admit that I spent a good twenty minutes sobbing out of frustration over this. Any help would be immensely appreciated.

    HI and Welcome to Apple Discussions...
    Try Changing the Airport Channel
    Open AirPort Utility, located in the Utilities folder in the Applications folder on a computer using Mac OS X.
    Select the device you’re setting up, and then click Manual Setup. Enter the base station password if necessary
    Click AirPort in the toolbar, and then click Wireless.
    Choose a new channel from the Channel pop-up menu.
    Carolyn

  • Search in ical doesn't work

    I am using 10.7.4 and my iCal search doesn't work. When I type in a search term, the results pane is blank.
    Help, please.

    Brentbin,
    Notice other posts, but where's the fix?
    What have you tried?
    Have you tried to...quit iCal, open System Preferences>Spotlight>Privacy, and add your Macintosh HD to the list?
    Wait a couple of minutes, and then remove your Macintosh HD from the Privacy list. You should notice (after a short delay) that Spotlight is reindexing your HD. After Spotlight completes the index, open iCal and see if your search works.
    ;~)

Maybe you are looking for

  • Uninstall TMG Packet Filter

    Hello, After removing TMG 2010 from a Windows 2008 R2 server, the following TMG Packet filter was left behind and the "uninstall" option is greyed out. How can I uninstall this?  Any ideas greatly appreciated...  (see image below)... Brett B

  • IPhoto does not retain slide show settings

    I'm making a simple slide show using the Ken Burns effect. Some of the transitions work well, but others cut off the tops of heads and titles I imported from another program. I find Title slides very difficult to create in iPhoto but that's another s

  • No text or buttons in messages

    I recently installed the 1.5 beta, but when I ran my program with it JOptionPanes no longer showed and text or buttons, so I uninstalled it and reinstalled 1.4, but the problem remains. I've tried deleting everything java related I coudl find, redown

  • PLS-00307: too many declarations of 'INSERTXML' match this call

    Dear All, I need help to create a procedure. I am describing the scenario below. I have a table which is xml_clob( doc_id number, doc clob The above table contain an xml file in doc column. What i need is read the doc column and parse and insert the

  • PC Suite + Windows 2000

    I dont know if anyone will be able to help but i was wondering when the support for windows 2000 was removed from the pc suite application and why nokia chose to do this? Solved! Go to Solution.