Pantech Marauder - Problems After 4.1.2 Update - Please Help!

My Pantech Maruder has been working great until Verizon pushed out the 4.1.2 Jelly Bean update.
The problems I am having now, is that whenever I receive a text message, the alert sound no longer works. I have applied all the settings, tried new ring tones, etc,
The default browser is a mess. When I load Google News, it is no longer in mobile view, and I can not seem to fix it. Also, the back button does not work. It always takes you back to the Google home page.
These are just a few. Most of the time I have to turn the phone off more often that I did before the update, to get most of my apps to work.
Is there a way to go back to the previous version?
Thank you,
Jim

I don't think you can revert to the previous version.   You said you turn the phone off and it gets better, briefly.  Have you tried a system cache clear?  This does work to clear some glitchy behavior on my Droid 4 running JB 4.1.2.
Power down phone
Hold volume up/down & power simultaneously until you see the Boot Mode Selection Menu
Use volume down to navigate to 'Recovery', use volume up to select
Should see screen with triangle and exclamation point next to an Android
Press volume up/down simultaneously to go into system recovery
Use volume rocker to navigate to 'wipe cache' and use power button to select
Once finished, use volume rocker to navigate to 'reboot system now' and use power button to select
HTH

Similar Messages

  • My iPhone 4S is not preforming any network related operations after 5.0.1 update - please help!

    My iPhone 4S is not preforming any network related (Calls, Messages) operations after 5.0.1 update - please help!

    5.0.2 has not been released, thus you can not upgrade.
    Stedman

  • 3g network still has problems after 3.1.2. PLease Help!

    I have recieved a new iphone 3gs, a new sim card, rebooted my phone to factory settings, updated to 3.1.2, and have been on the phone with support for hours but i am still having the same problem where i cant make or recieve calls and a restart fixes it, also if i switch off the 3g network and run on edge it works too. PLEASE HELP!

    No idea where you are, but if it is at all convenient make an appointment and take it to an Apple store.
    Phil

  • Boot Camp cant be recognised after Mac OS Yosemite update, Please Help?

    I've updated my Macbook Pro 13" OS software and apparently has crashed my boot camp partition.
    Specs:
    MacBook Pro (13-inch, Mid 2012)
    2.5 GHz Intel Core i5
    4 GB 1600 MHz DDR3
    Intel HD Graphics 4000 1024 MB
    I've looked at the terminal process by using certain codes etc, but i dont really understand it fully so if anyone has a similar problem or knows how to fix it please help, I have a lot of important information.
    Thank you

    diskutil list
    diskutil cs list
    sudo gpt -vv -r show /dev/disk0
    sudo fdisk /dev/disk0
    Hassans-MacBook-Pro:~ Hassan$ diskutil list
    diskutil cs list
    sudo gpt -vv -r show /dev/disk0
    sudo fdisk /dev/disk0
    /dev/disk0
       #:                       TYPE NAME                    SIZE       IDENTIFIER
       0:      GUID_partition_scheme                        *500.1 GB   disk0
       1:                        EFI EFI                     209.7 MB   disk0s1
       2:          Apple_CoreStorage                         200.1 GB   disk0s2
       3:                 Apple_Boot Recovery HD             650.0 MB   disk0s3
       4:       Microsoft Basic Data                         150.0 GB   disk0s4
    /dev/disk1
       #:                       TYPE NAME                    SIZE       IDENTIFIER
       0:                  Apple_HFS Macintosh HD           *199.7 GB   disk1
                                     Logical Volume on disk0s2
                                     5369FABD-46B3-4E24-8429-0CC5AD843B3E
                                     Unencrypted
    /dev/disk2
       #:                       TYPE NAME                    SIZE       IDENTIFIER
       0:     Apple_partition_scheme                        *16.0 MB    disk2
       1:        Apple_partition_map                         32.3 KB    disk2s1
       2:                  Apple_HFS Flash Player            16.0 MB    disk2s2
    /dev/disk3
       #:                       TYPE NAME                    SIZE       IDENTIFIER
       0:     Apple_partition_scheme                        *16.0 MB    disk3
       1:        Apple_partition_map                         32.3 KB    disk3s1
       2:                  Apple_HFS Flash Player            16.0 MB    disk3s2
    /dev/disk4
       #:                       TYPE NAME                    SIZE       IDENTIFIER
       0:     Apple_partition_scheme                        *16.0 MB    disk4
       1:        Apple_partition_map                         32.3 KB    disk4s1
       2:                  Apple_HFS Flash Player            16.0 MB    disk4s2
    Hassans-MacBook-Pro:~ Hassan$ diskutil cs list
    CoreStorage logical volume groups (1 found)
    |
    +-- Logical Volume Group A2693D38-F82C-4464-9D0D-C41859885304
        =========================================================
        Name:         Macintosh HD
        Status:       Online
        Size:         200111923200 B (200.1 GB)
        Free Space:   18980864 B (19.0 MB)
        |
        +-< Physical Volume EF5A76B8-8363-49CD-B178-4CF940B51A8B
        |   ----------------------------------------------------
        |   Index:    0
        |   Disk:     disk0s2
        |   Status:   Online
        |   Size:     200111923200 B (200.1 GB)
        |
        +-> Logical Volume Family 53FEE6C7-786D-4990-9BBA-5396F02EE50F
            Encryption Status:       Unlocked
            Encryption Type:         None
            Conversion Status:       NoConversion
            Conversion Direction:    -none-
            Has Encrypted Extents:   No
            Fully Secure:            No
            Passphrase Required:     No
            |
            +-> Logical Volume 5369FABD-46B3-4E24-8429-0CC5AD843B3E
                Disk:                  disk1
                Status:                Online
                Size (Total):          199740620800 B (199.7 GB)
                Conversion Progress:   -none-
                Revertible:            Yes (no decryption required)
                LV Name:               Macintosh HD
                Volume Name:           Macintosh HD
                Content Hint:          Apple_HFS
    Hassans-MacBook-Pro:~ Hassan$ sudo gpt -vv -r show /dev/disk0

  • Connectivity issues after 8.1.1 update please help! :(

    Hi all.  Here's the situation.
    I got my Iphone 6 on release day.
    Not had one single problem with it.
    On Monday however I do a general software update to IOS 8.1.1
    Now ever since then I cannot keep a steady connection to both WIFI AND my roaming internet.
    BOTH show as connected however load EXTREMELY slowly or not at all.  No matter where I am.
    I have done a soft reset.
    Switching on and off.
    And resetting Network Settings.
    Done all these 3 or 4 times and they are not helping.
    It is too coincidental to not be because of the software update.
    Can someone please help me?

    Still no help for you? I updated my iPhone 6 to 8.1.1 this past weekend and now have huge connectivity issues too. My home WiFi signal is 5 bars but runs very slow for example Facebook, the phone cannot update messages or photos. Try to connect for online banking, forget it. I have turned off WIFI and try using my Verizon signal which is 3 out if 5 bars, same problem. Don't understand why Apple cannot fix this apparent bug. Will call Apple Care in a few minutes and let you know what they say.

  • Problem to start iMac after 10.4.11 update please help

    Hi Everyone
    My iMac suddenly unprovoked not working after I downloaded the latest OS X 10.4.11 update from apple.com.
    After downloaded successfully, I double clicked the file to update, but nothing happened, the computer seemed not respond anything, so I logged out, but still not responding. I waited for almost 30 minutes I force switched off iMac by holding down the switch button.
    Then I tried to switch it back on that normally iMac would run fine, but it stuck again remained as the starting screen, a white background with an Apple logo in the middle and a circle spinning displays loading, but wait forever and nothing happens.
    How can I start my Mac as I am a new user of Macs? Is there another way?
    Thanks.

    Hi
    Just in case you are in the same situation & haven't already wiped your files then read this:
    I was pointed in this direction (see link below) when the same thing happened to me & I have managed to retreive all of my data using another mac that has OS X & a firewire cable.
    http://discussions.apple.com/thread.jspa?threadID=1246278&tstart=0
    Here is some more info as well here from me to try to help to explain things as at first I couldn't make head nor tail of what I was supposed to do:
    Make sure the mac that works is switched on & that your mac that will not start up properly is switched off. Connect the 2 computers using a firewire cable & then switch the mac that will not start up properly on while holding the 't' key down.
    After a while a symbol will bounce around on your mac & the mac that works ok that you are connected to should show your hard disk on it's desktop (a bit like when you plug a camera or a phone or an i-pod in). The you can retrieve what you need to save off your hard disk (by dragging it onto the computer that works) & back it up. This may take some time but at least you will have waht you need
    Then AND ONLY ONCE YOUR DATA IS SAFE you can erase & re-install your system software.
    To do this you should eject your hard drive from the computer you are using to rescue your data (i.e. like when you eject a cd/phone/i-pod etc.)
    Then you can restart your mac (the one that has frozen) and then immediately put your mac OS X installation dvd (the one that came when you got your mac) press c while it starts and then say install. You will need to also go to options & click erase & install. This will format your computer & erase everything off it so like I said make sure your data is safe first on another computer or even better onto disk.
    I hope this is as helpful as I found it when I was told the same information earlier...
    Jazamin

  • Problems after running "rejuvinate my system" - PLEASE HELP!!

    Dear all, I have recently tried the “rejuvenate my system” program in an effort to get my x61 back to its original start-up and working speed. For that purpose I have chosen the earliest back-up available which was made only a few weeks after I started using my thinkpad. The good news is, I managed to restore the original start-up speed. The bad news is that quite a few things simply stopped working. For one, I can’t open the control panel at all. Then I can’t connect to the internet because my notebook won’t “associate” with the modem. Also, it doesn’t recognize my usb-stick anymore and is asking for a cd with drivers which – as you might already assume – never existed. I am sure that there are many more problems that will become apparent over time. Only that I have not noticed them yet… Anyone else with similar problems? Or maybe even a solution? If not, can I get my thinkpad back to its slowed-downed and working stage? Thanks a lot for your help!!! It is much appreciated… (btw… it’s running on windows vista basic) red

    alright, let's start from scratch. do you have a cd drive handy. do you have factory restore discs.  the first step i guess is to get you online.  i keep a pcmcia adapter handy when i load an operating system into a computer that i'm rebuilding.  that way i can get online to the manufacturer and start loading drivers.  they're cheap, 20 bucks at staples or cheaper on ebay.  sorry, you can't get online to get to ebay.  walmart has them and kmart has them. but you have to load the cd onto your computer somehow. so you need a cd drive.  once you are able to get online you are gonna have to go onto the lenovo site and do a search for drivers for your model computer. i would stay away from the bios updates. (imbedded controller system) drivers.  on your computer, open control panel, system, hardware, devices and see which ones have the yellow tags beside them. these are what you need drivers for.  i would start with your broadcom drivers and wireless drivers.  I guess i should have asked you first how you usually get online to begin with. are you wired to a router or do you get online wireless. i hope wireless, then you can use the pc adapter i talked about earlier. this should get you started. i hope it helped at least a little. i'll check back and see how you're making out.  i've been where you are and it's not a happy place to be.  good luck.
    T430u, x301, x200T, x61T, x61, x32, x41T, x40, U160, ThinkPad Tablet 1838-22R, Z500 touch, Yoga Tab 2 Windows 8.1, Yoga Tablet 3 Pro
    Did someone help you today? Press the star on the left to thank them with a Kudo!
    If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"!
    If someone helped you today, pay it forward. Help Someone Else!
    English Community   Deutsche Community   Comunidad en Español   Русскоязычное Сообщество

  • ISync problems after Leopard upgrade...please help

    I recently upgraded to Leopard. It worked fine on my laptop, but something went wrong with my mac mini. The only way it would install is with a complete reformatting...had everything backed up, so I figured why not. Here is my mess.
    1. In iSync, my old Tiger mac mini is still registered and th e Leopard one is not syncing with that registration...it creates its own. Should I just delete both, reset the iSync with my laptop as the model and go from there?
    2. iweb does not have my old web sites in it. They are in my iDrive, but i don't know how to get them back on iWeb. I created them on the mac mini, so would unregistering it make me loose them? Is there a way that I can get them on the laptop's iWeb?
    3. My mail and safari fail to launch windows.....If I open a new window, I can see it listed, but I can't see it. What is up with this?
    Can someone help?

    I've already reset PRAM with the option,command,P,R keys... letting it chime a couple times... and have already done this many times over the last few days. Doesn't seem to help. I don't know how to reset NVRAM via open firmware and the instructions are vague. But, supposedly a PRAM reset is all you have to do.
    If it is a heat problem, why would it only have presented itself directly after a Leopard upgrade? It also does it when I boot off the Leopard disk. Actually does it worse. I'd just get a new card if I wasn't suspicious about the Leopard upgrade... not convinced it's a hardware problem yet. Though the card is mounted on the bottom slot above the CPUs. It has a fan on top that appears to be working but it doesn't look like much clearance between the card and the top of the CPUs case.
    I could move it up a slot to give it more air... but it still doesn't explain why until last Monday, it worked fine under Tiger.

  • Searching problem after 10.5.6 Update

    Hello everyone, we are having a problem with searching shares mounted on clients from a server.
    Prior to 10.5.6 we could search an entire share as well as folders in the share. After 10.5.6 we can't search the share and we can only search folders in the share.
    The server is currently running 10.4.11.
    I guess what I'm wondering is... are there people with server 10.5 that are also seeing this problem or would upgrading the server fix this search issue?
    Thanks
    Mike

    Searching problem after 10.5.6 Update
    Posted on: 8-jan-2009 18:32, by user: mike allen2 -- Relevance: 100% -- Show all results within this thread
    Hello everyone, we are having a problem with searching shares mounted on clients from a server.
    Prior to 10.5.6 we could search an entire share as well as folders in the share. After 10.5.6 we can't search the share and we can only search folders in the share.
    10.5 that are also seeing this problem or would upgrading the server fix this search issue
    Re: 10.5.6 disables spotlight from searching shared volumes
    Posted on: 18-dec-2008 15:49, by user: jshock -- Relevance: 89% -- Show all results within this thread
    on the other machines that didn't update to 10.5.6. They are able to search all shares. My 10.5.6 machine can only search localhost and Jukebox ...I ran mdutil on the 10.5.6 machine, here are the results:
    $ mdutil -s /Volumes/*
    Indexing disabled.
    /Volumes/Jukebox:
    Server search enabled.
    Re: 10.5.6 Update-DOES NOT SEARCH ANYMORE
    Posted on: 9-jan-2009 20:43, by user: Difhockey_68 -- Relevance: 89% -- Show all results within this thread
    Same problem here, upgraded to 10.5.6 and cannot search our apple server running tiger. Windows shares on 2003 server works fine. Will an upgrade of our Apple server to Leopard solve this issue? Is there an easy way to "uninstall" 10.5.6 without reinstalling the computer
    Since upgrading to 10.5.6 I can't search my network servers
    Posted on: 14-jan-2009 22:24, by user: gridout1959 -- Relevance: 84% -- Show all results within this thread
    Hi all...
    I recently installed the 10.5.6 OS upgrade and I've encountered a problem. I can no longer search my network attached servers - there is no search activity of any kind when I type in search terms. My local search works fine...I just can't search anything on my network ... windows servers. Is there a compatibilty issue between OS X 10.5.6 and Extreme Z-IP? Any helpful tips
    Updated to 10.5.6, no longer able to search through networked shares
    Posted on: 30-dec-2008 16:46, by user: Sigops -- Relevance: 84% -- Show all results within this thread
    One of our users was able to search through our network shares(extreemeZ-ip) just fine yesterday morning, mid morning he updated to 10.5.6 and is no longer able to use finder to perform searches on those shares
    Mac OS 10.5.6 clients can no longer search Mac OS 10.4.11 share points
    Posted on: 8-jan-2009 18:52, by user: rayvid -- Relevance: 71% -- Show all results within this thread
    After upgrading our workstations from Mac OS 10.5.5 to 10.5.6, we no longer receive Finder search results from our file server that runs Mac OS X Server v.10.4.11.
    Are there any other solutions available other than rolling the workstations back to 10.5.5 or upgrading the file server to 10.5.6

  • 3 Problems after jb 4.3 update

    stockmail exchange active sync shows only headers - no mail content
    bluetoth connect to my HTC One S didn´t work
    screen flickers when using virt. keyboard
    since everything worked well with 4.2.2 and there was no help from sony i decided to do a rollback
    !* same problems with 10.41.B.0.109 (last working version for me is 10.3.1.C.0.136 aka 4.2.2)

    hi.
    I contacted Sony about the Bluetooth / Wireless problem after the 4.3 update, eventually all I got back was that they're aware of the problems (Bluetooth) and are working on it for the next update. How long this will take is anyones guess.
    I find it incredible that they rolled out the 4.3 update because it has so many bugs, at least give us an easy way to roll-back to 4.2.2 ...... that actually worked!

  • I am using adobe photoshop cs6. I am facing a problem. When i save any image as "save for web". After saving image it show cropped. An image show many parts of the image after saving the image. Please help me. Thanks in advance.

    I am using adobe photoshop cs6. I am facing a problem. When i save any image as "save for web". After saving image it show cropped. An image show many parts of the image after saving the image. Please help me. Thanks in advance.

    Just go back in photoshop and use the Slice Select tool, then just click and select the slice and hit delete - if you're not sure which one is the active slice just right click and find the one that has the Delete Slice option.
    It's possible you either added the slices by accident or if you received it from someone they just had the slices hidden. For the future, you can go to View > Show > Slices to display (or hide) slices.

  • TS1814 I have windows vista and this did not work for my ipod it still will not update PLEASE HELP!

    I have windows vista and this did not work for my ipod it still will not update PLEASE HELP!
    iTunes for Windows: iTunes cannot contact the iPhone, iPad, or iPod software update server

    Try this:
    Close your iTunes,
    Go to command Prompt -
    (Win 7/Vista) - START/ALL PROGRAMS/ACCESSORIES, right mouse click "Command Prompt", choose "Run as Administrator".
    (Win XP SP2 n above) - START/ALL PROGRAMS/ACCESSORIES/Command Prompt
    In the "Command Prompt" screen, type in
    netsh winsock reset
    Hit "ENTER" key
    Restart your computer.
    If you do get a prompt after restart windows to remap LSP, just click NO.
    Now launch your iTunes and see if it is working now.
    If you are still having these type of problems after trying the winsock reset, refer to this article to identify which software in your system is inserting LSP:
    iTunes 10.5 for Windows: May see performance issues and blank iTunes Store
    http://support.apple.com/kb/TS4123?viewlocale=en_US

  • My App Store won't allow me to download any apps. It says such and such app is unable to download try again later  every time. I have enough storage all my devices are up to date on all updates  please help

    My App Store won't allow me to download any apps. It says such and such app is unable to download try again later  every time. I have enough storage all my devices are up to date on all updates  please help

    I am a librarian at a 1:1 iPad school and we are having this problem with all ~3000 student iPads as well at ~300 teacher iPads.  This is extremely frustrating.  I have tried suggested fixes found on other discussion boards but none have worked.

  • My incoming calls on my iphone 5C get disconnected after the first ring. Please help!

    My incoming calls on my iphone 5C get disconnected after the first ring. Please help!

    I had this problem too with my newly bought iPhone 4s.I went to a technician shop to ask what the problem is and they said they could fix it however they would charge £35 and I believed this was too much. I was playing around with my iPhone to see if I could fix this problem I went on setting the clicked on the music section at the music section there is the button called sound check which was off so I decided to turn it on . After I turned it on my sound came back I was ecstatic I saved myself £35 and having to return the phone.

  • Using Firefox, I am unable to do my microsoft windows updates, please help!

    I just downloaded Firefox, and I am unable to do my Microsoft updates, please help!
    == This happened ==
    Every time Firefox opened
    == I downloaded Firefox today

    Use IE for Microsoft updates. MS updates use AciveX, which Firefox doesn't support.

Maybe you are looking for