Pantone color(s) information for web use

How to embed the Pantone color(s) information in a Logo PDF? I have tried to upload a logo pdf, however the Pantone colors information could not be recognized on the web platform. Is it possible to embed the color information for web use?

Here was the javascript error message:

Similar Messages

  • Changing file size for web use - multiple images

    My most recent iPhoto event consists of 45 pictures, most of which are 1 MB or larger. I want to scale them down a bit for web use.
    I do understand how the export command works. If I want to change all 45 pictures at once (select all), where should I export them to, and then what is the procedure to get them back into iPhoto? I would really like them to all show up as a new event in iPhoto (same pictures as the original event, only smaller file sizes).
    Am I overlooking some easy way to do this?

    No you’re not overlooking an easy way to do it.
    Export them to a Folder on the desktop and then import them.
    However, why are you keeping these web versions? The more efficient use of disk space would be to upload them then trash them. If you need other versions in the future you can re-do them. Not a lot to be gained by holding on to them, is there?
    Regards
    TD

  • What steps do I take to edit raw files and save for web use, such as Instagram, Facebook, Websites, and emailing?

    What Steps do I take to edit raw files and save for web use, such as Instagram, Facebook, Websites, and emailing?

    When you open a raw file it will open in Adobe camera raw. That is where you can do most of the editing. Then it will be placed inside Photoshop where you can do more if needed.
    Now you can use the save for web dialog to export your image as a png or jpg to use on those sites.

  • Trouble outputting for web use

    I have had various problems outputting documents to Jpegs for use on a webpage. I am exporting at the standard res of 72 ppi but find the quality unacceptable when I import these into i-web. Could this have something to do with the resolution certain images were scanned or imported at? Also the text is not reproduced as crisp as expected.
    I am a bit of a novice in terms of Indesign so there may be an obvious solution that I haven't considered. Any help would be gratefully recieved.
    Thanks
    Angerman

    Hi Bob,
    Thanks for your help so far. I've tried exporting the PDF then converting to JPG in PS but the image quality appears to be worse than ever! Not sure if the settings I used for PDF where suitable for web use. Any ideas on how to maximise quality, maintaining crispness of fonts?
    Thanks
    Anton
    Date: Mon, 7 Sep 2009 06:21:59 -0600
    From: [email protected]
    To: [email protected]
    Subject: Trouble outputting for web use
    Export a PDF of the page you want to rasterize and open the PDF in Photoshop using the appropriate settings there. Save as JPG.
    Bob
    >

  • Pic sized for web use

    Dose anyone know how to resize a pic for web use?

    http://www.adobe.com/support/photoshopelements/ Tutorials & link to PDF user guide

  • Are all of the fonts that come with Dreamweaver CS6 licensed for web use?

    Are all of the fonts that come with Dreamweaver CS6 licensed for web use?

    I also have Creative Suite 5, which I believe comes with an Adobe set of fonts. Are these all licensed?
    Licensed?  Yes, but not necessarily for the web. Some licenses allow use in print or images but not the web.
    Custom Web Fonts
    For legal reasons, don't just assume you can use any font you wish on the web. Fonts are protected by intellectual property laws in much the same way that software is protected from unlawful copying, modifying or distributing. In other words, a font owner can say "Sure, you can use my font but you can't alter it, you can't reproduce it and you can't distribute it." On the web, that's a deal breaker because you need to be able to do all three.
    These font-families are common to most Windows/Mac systems. 
    CSS Font Stack: Web Safe and Web Font Family with HTML and CSS code.
    Adobe Edge and TypeKit Web Fonts are licensed for use on the web.
    Free fonts, web fonts | Download free Adobe Edge Web Fonts trial
    Typekit
    Nancy O.

  • How can i compress a file to QT for web use?

    how can i compress a file to QT for web use?

    Shane, in the ProApps site, has a couple of applets (droplets?) that have the settings for doing just that.
    www.proapptips.com
    register (its free) and then head to the download section.
    cheers,
    x

  • How can scan coins for web use?

    How can scan coins for web use?

    Did you Google "Scanning Coins"?
    http://www.telecoins.com/scanning.html
    If you have a specific question after reading the (somewhat dated) article, please post back!

  • Resize a Document for web Use

    I looked online on how to reduce file size od an .fla file for use on the web but not very clear. I have an .FLA file that is 800X600 px.  when I publish it, I reduce file size, audio to mono etc, and I am getting 1.8mb file, way to large for web use. I tried an swf and flv file but same results. I need to reduce the entire document. I read to use the onion skin the highlight everything then resize but I have over 5,000 frames in my movie. Can someone explain in detail, how to highlight all of the frames in the movie, and then reduce the file to say 400 X 300 px? I am able to drag the onion skin but only to the edge of the viewable document then I must scroll over and repeat the process. there must be an easier way to highlight all frames in the movie then resize the whole thing. Any help would be appreciated.

    I do not think you understand the question. Here is an answer I got off another forum but do not quite understand how to implement.
    If you want to resize everything, a quicker way would be to select all frames (select the onion skin tool) and then resize everything to fit the new canvas size. That way, every frame of your animation will be reduced at once.
    Kglad,
       Does that make sense? How do you get the onion skin to select every frame in the animation?

  • Prep for Web use

    Does anyone know where I can get info on web streaming, conversion for web use of FCP files or files submitted by clients. Conversion of PC files to mac and back for the above purposes.
    Thanks

    Welcome to the family.
    The FCP manual and the compressor manual are chuck full of'that stuff although I assume you do not own FCP or you would not be asking this question. You would have opened the index first.
    Start with google (or your favorite competitor) and look for encoding and transcoding.
    There are probably 1,000 excellent sites on the Web devoted to various products and practices and advice for users.
    Amazon will show you fifteen or twenty great books on the subject. You will need several because the science keeps changing and the craft is actually quite difficult.
    bogiesan

  • Using Illustrator CS6, how to preserve drawn colors when Save For Web to PNG?

    Using Illustrator CS6 on Mac OSX 10.9.1:
    step 1. I open a new file for Web profile.
    step 2. I verify that File > Document Color Mode is RGB.
    step 3. I draw a square and set it's color to 0,103,197 (decimal).
    step 4. I click File > Save For Web
    step 5. In the popup that opens, I set to PNG-24, and verify the option Convert To sRGB is not selected.
    step 6. Using the Mac's DigitalColorMeter, I observe the color is 0,109,191 in the Save For Web popup. If I save it, then open the saved PNG file, it's color is also 0,109,191.
    How to do this so the colors don't change?
    step 7. I close Save For Web popup.
    step 8. I verify Edit > Color Settings for Working Spaces is set to Monitor RGB, and that the Color Management Policies for RGB is off.
    step 9. I verify Edit > Assign Profile is set to Don't Color Manage This Document.
    step 10. I verify View > Proof Colors is off.
    Can anyone provide a set of Illustrator CS6 settings that let me save a PNG image with the same colors it's drawn in so I can use that PNG image in a website?
    I must be missing something obvious, because anyone working in web design must do this day in and day out, please let me know what procedure people follow to achieve this.
    UPDATE:
    Using the above procedure DOES preserve the colors when embedding the PNG image in a webpage viewed in Firefox and Chome, but NOT for Safari. Also, the colors are not preserved in Mac's Preview software, as well as Microsoft Office 2011 for Mac.
    I'm pretty new to all this. Hoping someone can provide some perspective on what typical procedure people use for web development when working with colors in Illustrator CS6.

    Using Illustrator CS6 on Mac OSX 10.9.1:
    step 1. I open a new file for Web profile.
    step 2. I verify that File > Document Color Mode is RGB.
    step 3. I draw a square and set it's color to 0,103,197 (decimal).
    step 4. I click File > Save For Web
    step 5. In the popup that opens, I set to PNG-24, and verify the option Convert To sRGB is not selected.
    step 6. Using the Mac's DigitalColorMeter, I observe the color is 0,109,191 in the Save For Web popup. If I save it, then open the saved PNG file, it's color is also 0,109,191.
    How to do this so the colors don't change?
    step 7. I close Save For Web popup.
    step 8. I verify Edit > Color Settings for Working Spaces is set to Monitor RGB, and that the Color Management Policies for RGB is off.
    step 9. I verify Edit > Assign Profile is set to Don't Color Manage This Document.
    step 10. I verify View > Proof Colors is off.
    Can anyone provide a set of Illustrator CS6 settings that let me save a PNG image with the same colors it's drawn in so I can use that PNG image in a website?
    I must be missing something obvious, because anyone working in web design must do this day in and day out, please let me know what procedure people follow to achieve this.
    UPDATE:
    Using the above procedure DOES preserve the colors when embedding the PNG image in a webpage viewed in Firefox and Chome, but NOT for Safari. Also, the colors are not preserved in Mac's Preview software, as well as Microsoft Office 2011 for Mac.
    I'm pretty new to all this. Hoping someone can provide some perspective on what typical procedure people use for web development when working with colors in Illustrator CS6.

  • Color managed workflow for web and camera raw

    I recently calibrated my monitor and was wondering what is the preferred workflow for the web? I shoot with my camera in sRGB and my working space in Photoshop is sRGB aswell. The problem that has arised now is that the color managed colors in Photoshop are way different than the non-color managed in my web browser. Is this normal? And what I don't quite get is how a photo that has an embed sRGB profile looks the same in Firefox (that understand embed profiles) and Photoshop, but in Google Chrome (that does not recognize embed color profiles) shows the colors very differently, although the browser should understand the photo is in sRGB by default and show the same colors that are in Photoshop, right? So what happens here, because the colors are not the same? What information does Photoshop assign to the embed color profile that makes the colors so different?
    Anyway, I assume the problem here seems to be my newly calibrated monitor profile. The only way I can get the same colors to my photo in Photoshop and to a photo in web is to use soft proofing set to my Monitor RGB AND save without a color profile. Is this the way to go? But here comes another problem. I shoot in RAW and use camera raw to edit my photos. Camera Raw doesn't allow soft proofing, so I'm stuck with these color managed colors that are so different from non-color managed colors I get in my browser that any color correction in Camera Raw is simply useless. Unless everyone was using color managed browsers and I could start to use fully color managed workflow, but that's not the case I suppose. So, what's the solution here?

    First off, you need to be working in sRGB, or converting to sRGB when you save out files that are destined for the web. You can change the color space that Camera Raw (ACR) send your raw files to by clicking the blue text in the bottom center of the ACR window. This is probably that safest workflow for you until you get a handle on color management. If the color of your images is very important, you might consider embedding a color profile in them, which will help color managed browsers render your color properly.
    If your display's color gamut is different than sRGB (many are), you'll find matching colors for non-color-managed browsers to be impossible. But consider the average display and take heart. The best you can do is correct to a standard and hope for the best.
    Both the convert to sRGB and embed color profile options are in the save for web dialogue box.
    More about the ACR workflow options here:
    http://help.adobe.com/en_US/Photoshop/11.0/WS739D7239-24A7-452b-92F9-80481C544F25.html
    More about matching colors for the web:
    http://help.adobe.com/en_US/Photoshop/11.0/WSB3484C68-ECD2-4fa4-B7CC-447A5FE86680.html
    http://help.adobe.com/en_US/Photoshop/11.0/WSD3F5E059-4F51-4b44-8566-13B854D3DF5F.html
    http://help.adobe.com/en_US/Photoshop/11.0/WS0B3CD652-4675-44be-9E10-445EB83C60BA.html

  • Errors in Export to PDF for web use - some images are lost when PDF is enlarged & in browser

    I have a multi-page PDF in InDesign CS6 that I want to export to view on the web. I need the file to stay under 2MB, and I need it to be crisp and nice enough to read the type on the page (as small as 9pt type).
    The errors that are occurring are the following:
    On some browsers, some images will entirely not show up. Some of the missing images have been pasted into the document, some placed. I cannot think of a correlation.
    When the PDF is enlarged (Adobe Acrobat X 10.1.10) to more than ~200%, there is one placed image that will mostly disappear. What I mean by "mostly" is that little bits of it are still visible, like I masked it carelessly or something. Since this is only occurring with one image it seems that it would be a problem with the image itself, yes? I'm all ears if I'm making a mistake. It is a placed .ai file with no link errors. Should I not be placing directly from illustrator? It renders wonderfully from 100% all the way up to 188%, and then if you enlarge by margins of 1% little bits of it disappear, almost a chunk at a time.
    The way I've been exporting is:
    File > Export > Adobe PDF (Print)
    Adobe PDF Preset: Smallest File Size
    Standard: None
    Compatinility: Acrobat 6 (PDF 1.5)
    Options: Optimize for Fast Web View
    Export Layers: Visible & Printable Layers
    Compression
    I always change the downsampling from [100/150] to [150/225]. I usually leave the JPG image quality low. I leave both bottom boxes checked (compress text and line art, crop image data to frames)
    Output
    Color Conversion: convert to destination
    Destination: sRGB 1EC61966-2.1
    Profile Inclusion Policy: Include Destination Profile
    However, after reading a few other forum questions I started trying to export as Acrobat 4 so that it would flatten. When I do that, problem #2 still persists although I didn't test problem #1. I haven't tried using Distiller, and using the "prepare for web publishing" action within Acrobat itself makes the PDF too artifacted.
    At the heart of my question is this: I am a young designer at an old company that is not necessarily keeping up with the times. I REALLY want to know what the best, most efficient way to export a pdf for web viewing is. Does this exist in InDesign, outside of InDesign? Does it exist at all? Tell me what I'm doing wrong so that I can get better!
    Thank you in advance.

    Show Large Images is a preference inside of Acrobat which might be disabled.
    Acrobat - File > Preferences

  • InDesgin CS6:  What is best practice for creating a jpg for web use?

    My graphic design experience is heavy toward print, but I’ve been charged to solve this web-graphics problem for my team. I’ve done searches online and can’t find resources specific to this issue. Thank you in advance for any assistance you can provide.
    Here’s the issue:
    My team uses both InDesign and Photoshop CS6, to make landing pages and other stuff for our website. After saving to jpg files, the InDesign files always have jaggy text compared to Photoshop’s jpg. What are we doing wrong?  Can’t InDesign be used for web?  I’ve also tried saving it out as PNG with no better results.
    Note: The background in the InDesign files are created in Photoshop (these look fine in both programs)—but the text created in InDesign looks jaggy while Photoshop’s text looks clean.
    Here’s how we save it in Photoshop
    File > Save for Web with these settings: JPG, High, Optimized, Quality 70, Blur 0, Matte None, Quality Bicubic.
    Here’s how I solved the problem (which seems too labor intensive to actually be correct) Is there a better way?
    I convert text to outlines.
    I change the “intent” to web intent
    Manually reset the page size.   Whenever I change the intent in anyway, InDesign automatically changes the page size to 8.5”x11” or 800x600 pix regardless of the original page-size. I expect it to change proportionately from inches to pixels, or vise-versa, but it just won’t do it. Is there a preference for this somewhere?
    Export as JPG with these setting:  Quality Maximum, Format method progressive, Resolution 72 ppi, Color Space RGB, Options: Embed Color Profile: sRGB IEC6196-2.1, anti-alias.
    Our web people tell us that if we use a higher resolution the image comes in proportionately too large, and they can’t use it at that size.
    This seems like a lot of work. There must be a better way?

    Ok. Thank you.     Hmm....I don't have PDF/X-4.  I have Adobe Preset PDF/X1a and PDF/X3.
    I assume PDF/X-4 is a from a newer version of InDesign.  Will PDF/X-3  work as well?
    So there is not a way to achieve a crisp jpg or png directly from InDesign without all the steps I'm using now?
    BTW, do you happen know why changing the "intent" changes the page size? or where I can change a preference on this.  unless I've overlooked it, I don't see anything relating to this under edit > preferences. 
    Thanks again for your reply, I value your input!

  • Photoshop CS3 color management "Save for Web" problem

    This problem is getting the best of me.......
    After spending 3 full days researching this problem, I am no closer to finding an answer than when I started. I still cannot produce a usable image through the "Save for Web" feature of Photoshop CS3. I have read web page after web page of "Tips, Tricks and Recommendations" from dozens of experts, some from this forum, and still I have no solution... I am exhausted and frustrated to say the least. Here's the simple facts that I know at this point.
    I have a web design project that was started in PS CS1. All artwork was created in photoshop and exported to JPG format by using "Save for Web". Every image displays correctly in these browsers (Safari, Camino, FireFox and even Internet Explorer on a PC).
    I have recently upgraded to PS CS3 and now cannot get any newly JPG'd image to display correctly. My original settings in CS1 were of no concern to me at the time, because it always just worked, and so I do not know what they were. I have opened a few of my previous images in CS3 and found that sRGB-2.1 displays them more or less accurately. I am using sRGB 2.1 working space. Upon openning these previous image files, I get the "Missing Profile" message and of course I select "Leave as is. Do Not color manage". CS3 assumes sRGB-2.1 working space, opens the file, and all is well.
    The problem is when I go to "Save for Web", the saturation goes up, and the colors change. The opposite of what most people are reporting. Here's another important point... new artwork created in CS3 does exactly the same thing, so it's not because of the older CS1 files.
    I have tried every combination of "uncompensated color", "Convert to sRGB", "ICC Profile", etc. while saving. I have Converted to sRGB before saving, and my monitor is calibrated correctly.
    I have tried setting the "Save for Web" page on 2-up and the "original" on the left is already color shifted before I even hit the "Save" button. Of course, the "Optimized" image on the right looks perfect because I am cheating by selecting the "Use Document Color Profile" item. Why do they even have this feature if doesn't work, or misleads you?
    Does anyone have any ideas what could be happening here? Why is this all so screwed up?
    CS1 worked fine out of the box.
    Final note: I do have an image file I could send along that demonstrates how it is possible to display an image exactly the same in all 4 of the browsers I mentioned with no color differences. It is untagged RGB and somehow it just works.
    I am very frustrated with all of this and any suggestions will be appreciated
    Thanks,
    Pete

    >> First of all... I'm using an Adobe RGB image master... I open it and get the Profile Mismatch Screen... I choose Use Enbedded profile... all looks well. Next I go to Proof Setup > Monitor RGB... again all looks well, no change that I can tell.
    This has further confused the issue on several points, not the least of which version PS you are doing this with?
    >> AdobeRGB> Convert to Profile > Working Space sRGB-2.1... all still looks well... but now, when I go to Proof Setup > Monitor RGB... I see the insane oversaturated look that is driving me nuts.
    That is your strongest clue...it sounds like you have a bad system or bad monitor profile. To rule out the monitor profile: Set sRGB as your monitor profile in System Prefs> Displays> Color.
    >> Adobe RGB image master... I open it and get the Profile Mismatch Screen... I choose Use Enbedded profile... all looks well. Next I go to Proof Setup > Monitor RGB... again all looks well
    That doesn't make sense, stripping an embedded AdobeRGB profile should desaturate the color in Softproof MonitorRGB, especially the reds -- you have something wacky going on there.
    At this point I think you need to review the links and get a grip about how color management and profiles work...
    BTW, forget about setting ColorSync in PS COlor Settings, use Adobe ACE.
    MO,
    I think SFW is fixed under CS3 :) By default it Converts to sRGB and strips the profile.

Maybe you are looking for