Parallaxing with layers..

Hey guys, Just wanted say I love Parallaxing! But I am having a few issues with it and layers. Even though I have the image "sent to back" it will appear on the top after hitting its keyframe to change the movement speed. I put up a link to issue, you will find it at the bottom of the page where I have the images of me and my co worker slide in from the sides. You will notice the tops of our heads will apear over the top nagavation bar.. Also any thoughts on the design of the site?
http://samp03.businesscatalyst.com/index.html
Thanks,
Josh

Hey-
I just checked you site out and I didn't see any bug. You and your co-workers head appears below the nav. Btw, shout out to Lancaster, Pa! I live outside Philly and I go to the Keystone Record Fair in Lancaster quite a bit.
>K.

Similar Messages

  • Photoshop CS3 shuts down after opening a PSD file with layers

    Hello, I have met a problem with Photoshop CS3 (Windows XP SP2, no network printer) - after opening a PSD file with layers (saved with CS2) Photoshop shuts down. No error message.
    Can some of you help me? (The only software that I have installed after Creative Suite CS3 is Corel X4. I have installed no upgrades of CS3.)

    > I have installed no upgrades of CS3
    You should!
    Even if it doesn't help here you should.

  • JPEG/PSD issue--I open a jpeg and edit it (levels, crop) and then "save as" and the save as option shows there are now levels in the image and it wants to save it as a .psd file or a copy with layers.  What am I doing that has these settings appear?

    JPEG/PSD issue--I open a jpeg and edit it (levels, crop) and then "save as" and the save as option shows there are now levels in the image and it wants to save it as a .psd file or a copy with layers.  What am I doing that has these settings appear?

    16bit? Pixels extending beyond the canvas? (from a crop with delete unused pixels turn off).  Have you previously been saving PSD files?
    IME you sometimes have to tell Photoshop that the first save of a session is JPG, and it remembers from there on.  The way to 'tell' Photoshop that JPG, or PDF, or PNG etc are now your preferred format is to Ctrl (Cmd) click on that format in the Save As drop down list.  So long as the file does not have parameters that your chosen format does not support, then this should work for you.
    [EDIT]  Just noticed that you did include 'Crop' in the subject line.  Do you have 'Delete cropped pixels' checked?

  • Hello, I use photoshop cc 10 days and I did a lot of files with layers and channels. For two days in two different locations that only happens in some documents when you reopen the job done no more .. Example 6 channels on the facts I see only one .. Than

    Hello, I use photoshop cc 10 days and I did a lot of files with layers and channels.
    For two days in two different locations that only happens in some documents when you reopen the job done no more .. Example 6 channels on the facts I see only one ..
    Thank you for your attention.
    Annalisa 

    Don't understand what you writing here.  Screen shoots would be most helpful.
    Supply pertinent information for quicker answers
    The more information you supply about your situation, the better equipped other community members will be to answer. Consider including the following in your question:
    Adobe product and version number
    Operating system and version number
    The full text of any error message(s)
    What you were doing when the problem occurred
    Screenshots of the problem
    Computer hardware, such as CPU; GPU; amount of RAM; etc.

  • A Problem with Layers

    I am having a problem with layers in different browsers. I
    have a menubar with some drop-down items. Some of these need to
    fall over other page objects such as GIFs. The problem is that in
    order for that to render correctly in IE, I have to set the z-index
    of the GIF to -1. However a GIF set to -1 doesn't render at all in
    Netscape. If I set the z-index to 0 it works fine in Netscape but
    not in IE. Has anyone dealt with this problem???

    Ugh. You are in deep doody.
    Your only option now is to hack mm_menu.js, and change all
    instances of -
    z-index="1"
    to -
    z-index="99"
    But - perhaps it would help if you read what the 'author' of
    that menu code
    (he adapted it, actually) says about the menus -
    http://www.losingfight.com/blog/2006/08/11/the-sordid-tale-of-mm_menufw_menujs/
    In addition, this page will show you the potential problem of
    building with
    only layers -
    http://www.great-web-sights.com/g_layer-overlap.asp
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.dreamweavermx-templates.com
    - Template Triage!
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    http://www.macromedia.com/support/search/
    - Macromedia (MM) Technotes
    ==================
    "glen_nicholls" <[email protected]> wrote in
    message
    news:enm2cp$de7$[email protected]..
    > Yes, everything on my page is in layers. Is that OK?
    Also I created my
    > menu in Fireworks.

  • How do I make a 20 X 30 print with layers of 16 X 20, 12 X 18, 11 X 14, 8 X 12, 8 X 10, 5 X 7 and 4 X 6 of the same image to display the different sizes available to someone?  Using Elements 13 with Windows 8.1

    How do I make a 20 X 30 print with layers of 16 X 20, 12 X 18, 11 X 14, 8 X 12, 8 X 10, 5 X 7 and 4 X 6 of the same image to display the different sizes available to someone?  Using Elements 13 with Windows 8.1
    A senior citizen needs some help.
    Thanks

    Saving each image as different size - is it an option for you?  I would save images with their name as: 20x30.png, 16x20.png etc etc.
    Or explain whether you want these in a webpage  in which case only one image is necessary and different sizes are displayed with good CSS code.  this is question for Dreamweaver forum if this is what you want.

  • Working with layers | Learn Photoshop Elements 11 | Adobe TV

    In this movie, author Jan Kabili discusses using layers in the Editor workspace in Photoshop Elements 11. Jan explains what layers are, why you might choose to use them, and how to create and work with layers in the Layers panel.
    http://adobe.ly/SBQu3E

    I have downloaded & installed flash player at least 4 four but your programs do not find it. What do I need to do?

  • Working with Layers | Learn Photoshop Elements 9 | Adobe TV

    With layers, you can work nondestructively and save all of your creative ideas in a single file. Learn about the various options in the Layers panel and how to harness the true power of Photoshop Elements by working with layers.
    http://adobe.ly/ynakt0

    What is the best way to work on photographs, editing them, and preparing for print if I can't save layers as .jpg or non-layered .tiffs? The photo lab I will be using does not allow layered .tiff. I have seen many videos that show how to let's say enhance eyes using layers, but in this video it says that .jpg cannot be used. I am new to photography and PSE an would like to know if there is an alternative way to edit an image that can be saved as .jpg. Thank you!

  • Wrap with layers

    hello,
    i amy be asking a simple question but...
    i have assambled a panorama with 10 images, all with layers and masks.
    at this point i would like to select the entire panorama and "wrap" it with the transfome tool.
    of course i don't want to flatten the images in order to do this. i would like to keep my layers.
    and another question, can i wrap in a smaller grid?
    like when i use this command of wrap PS provides a grid which is divided into 9, and i can move within these lines,
    is there any way to make a tighter grid in the wrap command?
    thanks
    oren.
    using CS6

    Convert all the Layers to one Smart Object and transform that.
    The Wrap grid is what it is.
    Alternatives include Puppet Warp or the Filter »Displace«.

  • Placed PDF with Layers - can layers be maintained and exported in a new PDF?

    Can a layered PDF placed in InDesign include these layers in the InDesign Layers Panel? I have a layered PDF created in Illustrator CS4. I'm placing it in InDesign CS4 6.0.4 and want to export a PDF with the layers in tact from Illy. I use the Show Import Options dialog box and can see all of the layers in the layers tab. I tried both options for update links so that choice seems unimportant. I only see one layer, Layer 1, in the InDesign layers panel after placing the PDF. I was expecting to see all of the layers from the placed PDF. I exported as Acrobat 6 with Create Acrobat Layers checked but the only layer in the exported PDF is Layer 1. I searched and read for quite some time and can’t figure it out. Maybe I’m expecting something that isn’t possible but it sounds like it should be. I tried placing it as a native AI file with the same results. Where am I going wrong?
    Thanks,
    Glenn

    Thanks to Bob and Peter. I understand what you said. It seems as though the ability to place a file with layers should allow you to take advantage of it better. This is a map that will allow users to turn on or off various points of interest, hotels, etc. Now I realize I can at least control them from the place dialog box so, other than having to place the same map multiple times I end up with what I wanted. Thanks for the soultions.
    Glenn

  • Server Side Includes not rendering correctly in Firefox with Layers

    Hi
    The server side includes are not correctly rendering with layers in firefox. From my site here:-
    http://www.osteriastecca.com/index.php
    the home_page.php content renders above a layer on the index.php page. Initially I thought this might be a Flash layer issue but the wmode is set correctly to transparent and it works fine with a normal ssi. It also works fine in Firefox without a server side include as you can see here:-
    http://www.osteriastecca.com/index_old.php
    Works fine in IE and Safari, but not Firefox.
    How can this be rectified?
    Regards
    Glennyboy

    What testing server setup do you have? Are you using something like WAMP?
    What do you see on screen which tells you the SSIs are not rendering? Any error message?

  • Help with Layers

    Hi,
    I need some help with Layers? Here is a link to a simple page
    layout with 1 blue table, and 1 small green box. Both have a
    capital "I" on the left. The table was aligned to "center" in DW.
    http://sfrcreations.com/tbe.html
    When I built this page at home, on my tiny 12" monitor, the
    letters lined up over each other. When I look at it on larger
    monitors, they no longer line up. I did have a suspicion that this
    would happen due to my lack of knowledge of layers. So, my question
    is. How does one, with a centered table, get a layer to always
    appear where the designer wants it to no matter what the browser
    size is. For instance if you move the browser to different sizes,
    the blue box follows, but the layer stays where it is?
    Are the menus on this forum site and the Adobe site in
    general done by using layers? I ask, because if so, this site is
    centered, and the layers seem to adjust to any browser size.
    By the way, I am using Dreamweaver 8.
    Thanks for any help!

    8). I'm a shameless thief.
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.dreamweavermx-templates.com
    - Template Triage!
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    http://www.macromedia.com/support/search/
    - Macromedia (MM) Technotes
    ==================
    "Nadia : **AdobeCommunityExpert**"
    <[email protected]> wrote
    in message news:[email protected]...
    > Took the words right out of my mouth - thanks Murray ;-)
    >
    > Nadia
    >
    >
    > "Murray *ACE*" <[email protected]>
    wrote in message
    > news:[email protected]...
    >> The wrapper div is relatively positioned and auto
    centering with a fixed
    >> width. This has two consequences. Being auto
    centering is obvious. The
    >> relative positioning is not.
    >>
    >> When an element is relatively positioned, it takes
    its position from its
    >> location in the flow of the code. Since the wrapper
    is the first thing
    >> on the page (wrapping everything else) its position
    will be at the top of
    >> the page (unless you would apply top page margins,
    or top margins on the
    >> wrapper), and centered (since relatively positioned
    elements *can* move,
    >> unlike absolutely positioned elements). Now - since
    it is relatively
    >> positioned *IT* will serve as the point of reference
    for all internal
    >> absolutely positioned elements. That's because the
    definition of
    >> absolute positioning is that its position is
    calculated from the location
    >> of its closest positioned ancestore.
    >>
    >> Thus, as the relatively positioned wrapper 'floats'
    to the center of each
    >> different browser viewport, all internal absolutely
    positioned elements
    >> are forced to 'float' along with it (I use 'float'
    in quotes to indicate
    >> that I am NOT talking about CSS floats, which are
    very different
    >> creatures than what I am describing).
    >>
    >> That's why it works.
    >>
    >> --
    >> Murray --- ICQ 71997575
    >> Adobe Community Expert
    >> (If you *MUST* email me, don't LAUGH when you do
    so!)
    >> ==================
    >>
    http://www.dreamweavermx-templates.com
    - Template Triage!
    >>
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    >>
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    >>
    http://www.macromedia.com/support/search/
    - Macromedia (MM) Technotes
    >> ==================
    >>
    >>
    >> "engmix" <[email protected]> wrote
    in message
    >> news:[email protected]...
    >>> Hi Nadia,
    >>> Could you please explain how you designed this
    layout with some degree
    >>> of
    >>> detail. I could easily cut and paste your
    layout, but I really want to
    >>> understand how you went about it. What did you
    start with and so on.
    >>> Hope this
    >>> isn't to much to ask?
    >>>
    >>> Thanks again!
    >>>
    >>
    >>
    >
    >

  • How to save a PNG with layers in Photoshop.

    i am tryin to save a PNG with layers. Is it poosible ?
    What i found on the net is ....PNG is not meant for multiple layers. But still want to know if photoshop have its own proprietory standard for PNG.
    Thanks in advance.

    No, it is not possible.
    PNG doesn't support layers.
    A few apps stuff their own private data into PNG to hide layer data, but well, it's private undocumented data.

  • DHTML image scroller with layers

    I'm hoping someone here can point me in the right direction.
    I have a website with a photo gallery and 12-15 photos in
    each gallery. The thumbnails display 4 at a time left to right.
    Then I can click the right arrow to see the next 4 or the left
    arrow to see the last 4.
    The client is insisting that this is a 'scroller', so when
    the user mouse overs the right arrow it scrolls to the left and
    stops when they mouse off the right arrow. Same for the left arrow.
    I'm sure it can be done with layers but cannot find the right
    tutorial. Any ideas ??

    Check the tutorials on the PVII site. I believe they had one
    there....
    http://www.projectseven.com/
    Murray --- ICQ 71997575
    Adobe Community Expert
    (If you *MUST* email me, don't LAUGH when you do so!)
    ==================
    http://www.dreamweavermx-templates.com
    - Template Triage!
    http://www.projectseven.com/go
    - DW FAQs, Tutorials & Resources
    http://www.dwfaq.com - DW FAQs,
    Tutorials & Resources
    http://www.macromedia.com/support/search/
    - Macromedia (MM) Technotes
    ==================
    "riprod7" <[email protected]> wrote in
    message
    news:efjkor$a0c$[email protected]..
    > I'm hoping someone here can point me in the right
    direction.
    >
    > I have a website with a photo gallery and 12-15 photos
    in each gallery.
    > The
    > thumbnails display 4 at a time left to right. Then I can
    click the right
    > arrow
    > to see the next 4 or the left arrow to see the last 4.
    >
    > The client is insisting that this is a 'scroller', so
    when the user mouse
    > overs the right arrow it scrolls to the left and stops
    when they mouse off
    > the
    > right arrow. Same for the left arrow.
    >
    > I'm sure it can be done with layers but cannot find the
    right tutorial.
    > Any
    > ideas ??
    >

  • Frustrated with layers

    I know this is so simple but I can't get it to work. what I want is to have a plain background color with either a picture over that is faint or a pattern that is lighter these are not the focal points then i want to add a few photos but would like to feather or rough up the edges so they don;t ;look like i just dropped them in and maybe a some other graphic like an animal or flames etc. and some text. please any help would be great. thank you in advance. Susan

    Since you mention being frustrated with layers, I assume you are having problems getting several images into the same document.
    Start by reading through this tutorial which shows how to open and get more than one image into a document.
    http://www.alibony.com/pse/070308copy.html
    You might also find some useful info on this page...top part anyway.
    http://www.alibony.com/pse/022108collage.html
    jazzyroses13 wrote:
    I know this is so simple but I can't get it to work. what I want is to have a plain background color with either a picture over that is faint or a pattern that is lighter these are not the focal points
    Use opacity in the layer's palette to reduce this image or pattern's transparency.
    jazzyroses13 wrote:
    add a few photos but would like to feather or rough up the edges so they don;t ;look like i just dropped them in
    One way would be to use this layer in a clipping mask...also known as a clipping group. See this tutorial on clipping masks/groups that includes several ways types of bases.
    http://www.photokaboom.com/photography/learn/Photoshop_Elements/layers/layer_groups_clippi ng_masks/1_layer_groups_clipping_masks.htm
    jazzyroses13 wrote:
    I know this is so simple but I can't get it to work. what I want is to have a plain background color with either a picture over that is faint or a pattern that is lighter these are not the focal points then i want to add a few photos but would like to feather or rough up the edges so they don;t ;look like i just dropped them in and maybe a some other graphic like an animal or flames etc. and some text. please any help would be great. thank you in advance. Susan
    Personally, I prefer using a solid color fill adjustment layer as the base in the clipping mask. (You'll find this option in the layer's palette under the black and white icon. It'll be one of the options in the menu list.) Drag out the rectangular marquee in the mask of the solid color fill adjustment layer.  With the mask layer selected in the layers palette, fill it with black paint. Invert the mask (ctrl + I on PC; cmd + I if on a mac). You can use the free transform command (Ctrl + T on PC; Cmd + I on Mac) to resize the masked area.
    Some edge techniques...
    If you desire to soften the edge, apply the gaussian blur filter. If you want a spattered edge, apply the spatter or sprayed edges filter to the mask...can also try using other filters that work in grayscale which will be the only ones not grayed out. (Note: You could apply the filter(s) to the rectangle first then invert the mask if you prefer). Another method is to use the brush tool and paint in the mask...thick heavy brush set is a good choice. (Note: Use black paint to hide (the image); white paint to reveal (the image); and gray will be semi-transparent (think feathering).
    Edit: You don't have to use the rectangular marquee...can use circular or any selection for that matter.
    Info on the type tool can be found here.
    http://www.photokaboom.com/photography/learn/Photoshop_Elements/type_tool/1_type_tool.htm
    You'll most likely want to have your type in the topmost layer(s) of the stack in the layers palette so you don't cover them up with your images. Use move tool to move graphics and type into desired location. You'll find using the grids and/or guides useful in planning out your image.
    There's a video on using a scrabook kit (Quick Page) here that might be useful as it shows how things are stacked when building a page:
    http://www.alibony.com/video/video-lesson34.htm
    For the transform command (resize and rotate), she's using Ctrl + T on PC (cmd + T if on mac) instead of using the menu Edit<Free Transform. I thought I'd add that so you don't get lost with how she's doing that.
    Another tutorial on using quick pages:
    http://graphicssoft.about.com/od/digitalscrapbooking/ss/howtoquickpage_10.htm
    I think there might be some of these included with Elements. I don't have a recent version of Elements so I'm not 100% sure where they are located but I'm thinking it's in the Organizer.

Maybe you are looking for

  • Computers Showing up twice in the network list even with Smb disabled?

    I've just purchased an Airport Express and figured it was time to get the network into shape. I've got 4 macs (MBP, MB, iMac, and PB) and one Windows box. In the sharing list, 2 of the macs show up only once, and 2 of them show up twice. I think I've

  • Cannot save new outlook contacts or access Global Address List

    I have outlook 2007 connected via VPN to exchange server.  I can 1) Send and receive emails 2) Edit contacts that have already been created some time ago 3) Copy and paste existing contacts However, when I try and save a new contact it says the Micro

  • Inverted colors in PDF

    I have some problems with CMYK images in PDF docs. I have a pdf Doc with CMYK jpeg inside. This doc looks right. I got this image from pdf doc with some tool and this image look like negative(colors inverted). What is this? May be there is some flag

  • Problem with PGI - Sales Order stock does not exist

    Hi I created order 58161 with 1 item line (10). Did a delivery and created a Picking Request (which i released via transaction VL08). When i try to do PGI i get following message: Sales order stock 58161 000010 does not exist. I have previously done

  • IPS Manager Exp 7.0.3 fails to connect to AIP-SSM module

    Hi, am trying to connect to my IPS module nested in a Cisco ASA 5540 appliance. Yesterday i was able to connect and do my configurations but when running the IME today i dint find my sensor module in the devices list so i tried adding it again and it