Parallel runs slow on Boot Camp partition and other questions...

Hi all,
I have had my MBP santa rosa for about 3 weeks. I love it. Everything is super fast and responsive on this thingy. I have parallel running on Boot Camp partition and it is slow. I mean its not awfully slow but when I click start (the play button of Parallel), I see the spinning beachball for 0.5 to 1 min. When I get to Windows XP or Vista (I tried both of them), there is no way parallel could perform up to "near native" speed, I get a lot of sand-clock and it takes 1 mins or so to boot up MS SQL server 2005. When i tried to open lots of windows at once, it freezes for a while then all the windows pop up. I dedicated 1gb of ram for parallel. I am thinking of removing boot camp and use parallel virtual drive on which to install windows. Would that make the performance any better?
I have another question. I bought Disk Warrior 4 but my lovely cousin broke the disc into half coz he thought it was a cheap toy. Is there anyway I can make another bootable CD for disk warrior? I know BootCD only works on Panther. Can I use SuperDuper to clone my MBP and put the image file on a PC-formated external hard drive to bootup from there to run Disk Warrior?
Thank you so much for your help. I gotta say this MBP is the best laptop I have ever used in my entire life. VEry happy with the purchase so far. Thank you Apple.
MacNo0b
p/s: Any recommendation on how to keep the Mac running well without slowing down? Cheers

I have to say, I have never used Parallels in a system with 2GB. I don't feel that it's worth it given Boot Camp is available. That said, if you run nothing else it should run quite happily.
If you're having problems getting through the installation try setting it up with a virtual environment that has no drive. That way you should be able to get through the installation/setup and then you can add your Boot Camp partition after that.
As for transferring files, I will either use Parallels folder sharing else a 1GB DOS formatted USB flash drive.
PS You're right, I certainly can't complain about the equipment I get to play with. I've had to fork out quite a bit of money for the privilege but it's all been worth it.

Similar Messages

  • Can I erase the boot camp partition and dual boot snow leopard and mountain lion instead

    Can I erase the boot camp partition and dual boot snow leopard and mountain lion instead

    Please don't double post. Look at your other thread.
    If you want to get rid of Windows and the BC partition use the Boot Camp assistant program to remove the Win/BC partition. Don't do it manually with Disk Utility Use the BC A program.

  • Boot Camp Partition and OS X Cloning Apps?

    I've tried a search of previous posts and can't get a bulletproof answer. Here goes:
    Using XP SP3 in a Boot Camp partition on my iMac running Snow Leopard. Only one complaint (the metal keyboard Option key issue for boot up -- really lame).
    The Windows partition is for two financial applications, mission critical ones. I copy the key data files over to my Mac side after using these Windows apps.
    I back up my Mac side with SuperDuper! My mission critical files are thus picked up by my SuperDuper! routine. I've tried restoring them and it works without a hitch.
    My question is: if my system HD goes south, will my SuperDuper! clone restore the previous partition structure on the new system HD? Also, I've always assumed I'd have to reinstall the Windows apps individually and replace the mission critical data files one by one in a separate process. Is this right?
    I also keep Time Machine backups running. They pick up those mission critical copies brought over to my Mac side. Same questions re: a replacement system HD -- will the partition structure be restored, and am I right in understanding the apps and files on the Windows side are up to me to restore outside any Time Machine rescue.
    Thanks much for your patience and your help.
    Terry

    Hi Terry,
    your assumption is correct.
    Neither SuperDuper nor Time Machine will clone or backup your Windows partition since both only handle harddisk/partitions that use the MacOS Extended file system.
    Files that are on such harddisks/partitions are cloned/backuped regardless of their nature or origin.
    So of you copy files from your WIndows partition to your OSX partition like your mission critical files, these are then cloned/backuped when using SuperDuper or Time Machine.
    And yes, when booting from your external harddisk with the cloned OSX and then using SuperDuper to clone this OSX back to your internal harddisk all the files (and therefor also your mission critical files) are back "in place".
    Same goes for when using a Time Machine backup for a full system restore.
    After that you would have to reinstall Windows and the Windows programs to get it all back.
    Currently Casper http://www.fssdev.com/products/casper/ is considered the best solution for a full Windows backup/restore.
    Mike Bombich, the author of Carbon Copy Cloner (another cloning app for OSX) is to my knowledge working on an addition to CCC to clone or backup a BootCamp Windows.
    But it's way too early to see any results on this.
    Regards
    Stefan

  • Boot Camp partitions and restarts to black DOS screen, white cursor

    I've tried installing Windows 7 on my MacBook Pro 8,1 three times now. When Boot Camp Assistant finishes the partition it restarts to a black screen with white cursor at top left. Nothing happens after that. If I restart it still happens. The only way to boot into OS X now is to hold option on boot and select my main drive.
    Any help is very much appreciated..
    Model Name:          MacBook Pro
      Model Identifier:          MacBookPro8,1
      Processor Name:          Intel Core i5
      Processor Speed:          2.3 GHz
      Number of Processors:          1
      Total Number of Cores:          2
      L2 Cache (per Core):          256 KB
      L3 Cache:          3 MB
      Memory:          16 GB
    Intel 6 Series Chipset:
      Vendor:          Intel
      Product:          6 Series Chipset
      Link Speed:          6 Gigabit
      Negotiated Link Speed:          6 Gigabit
      Description:          AHCI Version 1.30 Supported
    OWC Mercury Electra 6G SSD:
    Capacity:          120.03 GB (120,034,123,776 bytes)
    Model:          OWC Mercury Electra 6G SSD             
    Revision:          503ABBF0
    Native Command Queuing:          Yes
    Queue Depth:          32
    Removable Media:          No
    Detachable Drive:          No
    BSD Name:          disk0
    Medium Type:          Solid State
    TRIM Support:          No
    Partition Map Type:          GPT (GUID Partition Table)
    S.M.A.R.T. status:          Verified
    Volumes:
    disk0s1:
    Capacity:          209.7 MB (209,715,200 bytes)
    BSD Name:          disk0s1
    Content:          EFI
    I have removed my optical drive and installed an SSD in the main bay, and moved my HDD into the optical bay.
    Macintosh SSD:
    Capacity:          94 GB (93,999,996,928 bytes)
    Available:          10.57 GB (10,569,678,848 bytes)
    Writable:          Yes
    File System:          Journaled HFS+
    BSD Name:          disk0s2
    Mount Point:          /
    Content:          Apple_HFS
    Recovery HD:
    Capacity:          784.2 MB (784,220,160 bytes)
    BSD Name:          disk0s3
    Content:          Apple_Boot
    BOOTCAMP:
    Capacity:          25.04 GB (25,038,946,304 bytes)
    Available:          25.02 GB (25,024,774,144 bytes)
    Writable:          Yes
    File System:          MS-DOS FAT32
    BSD Name:          disk0s4
    Mount Point:          /Volumes/BOOTCAMP
    Content:          Microsoft Basic Data
    This is my external optical drive (original Apple, taken from my MacBook)
    USB to Serial-ATA bridge:
      Capacity:          3.22 GB (3,224,993,792 bytes)
      Removable Media:          Yes
      Detachable Drive:          Yes
      BSD Name:          disk3
      Product ID:          0x0c31
      Vendor ID:          0x1bcf  (Sunplus Innovation Technology Inc.)
      Version:           1.19
      Speed:          Up to 480 Mb/sec
      Location ID:          0xfa132000 / 11
      Current Available (mA):          500
      Current Required (mA):          2
      Media Name:          GRMCULXFRER_EN_DVD
      Partition Map Type:          Unknown
      S.M.A.R.T. status:          Not Supported

    ultimateshep wrote:
    Did you end up getting it to work? I am so frustrated. I have spent countless hours trying to install windows 8 on my Mac using bootcamp assistant. I get the same result: the computer restarts to start running windows and then it just goes to the black screen with the cursor blinking. I have an early 2008 iMac, just upgraded to Mountain Lion. Bought the Windows 8 from completesoftwarecenter.com for 69$ bucks. They claimed that it was the 'full' version. I am now not so convinced. I may ask for a refund. Any suggestions? PLEASE HELP!
    I got the 64 bit not the 32 bit windows 8, dont know if that plays a part or not.
    Doesn't matter, Windows 8 is not supported yet (Apple have not released drivers) at the moment it is pure luck if it works (as many have discovered) Use Win 7 or wait for support from Apple.

  • Maverick Boot Camp - Partition and USB installation of Windows 7

    Hi my CD-ROM drive is broken and i want to configure a partition for windows 7 and install it from a UB, but i don’t have the bootcamp option for usb installation visible.
    My OSX version is Maverick 10.9
    Mac model iMac11,2
    Boot rom : IM112.0057.B01
    My info.plist configuration file in the bootcamp package is:
    <?xml version="1.0" encoding="UTF-8"?>
    <!DOCTYPE plist PUBLIC "-//Apple//DTD PLIST 1.0//EN" "http://www.apple.com/DTDs/PropertyList-1.0.dtd">
    <plist version="1.0">
    <dict>
              <key>32BitSupportedModels</key>
              <array>
                        <string>MacBook7,1</string>
                        <string>MacBookAir5,2</string>
                        <string>MacBookPro10,1</string>
                        <string>MacPro5,1</string>
                        <string>Macmini5,3</string>
                        <string>iMac12,2</string>
              </array>
              <key>BuildMachineOSBuild</key>
              <string>13A566b</string>
              <key>CFBundleDevelopmentRegion</key>
              <string>English</string>
              <key>CFBundleDisplayName</key>
              <string>Boot Camp Assistant</string>
              <key>CFBundleExecutable</key>
              <string>Boot Camp Assistant</string>
              <key>CFBundleGetInfoString</key>
              <string>Boot Camp Assistant 5.1.0, Copyright © 2013 Apple Inc. All rights reserved</string>
              <key>CFBundleIconFile</key>
              <string>DA</string>
              <key>CFBundleIdentifier</key>
              <string>com.apple.bootcampassistant</string>
              <key>CFBundleInfoDictionaryVersion</key>
              <string>6.0</string>
              <key>CFBundleName</key>
              <string>Boot Camp Assistant</string>
              <key>CFBundlePackageType</key>
              <string>APPL</string>
              <key>CFBundleShortVersionString</key>
              <string>5.1.0</string>
              <key>CFBundleSignature</key>
              <string>????</string>
              <key>CFBundleVersion</key>
              <string>473</string>
              <key>DARequiredROMVersions</key>
              <array>
                        <string>IM41.0055.B08</string>
                        <string>IM42.0071.B03</string>
                        <string>IM51.0090.B03</string>
                        <string>IM52.0090.B03</string>
                        <string>IM61.0093.B01</string>
                        <string>MP11.005C.B04</string>
                        <string>MB11.0061.B03</string>
                        <string>MBP11.0055.B08</string>
                        <string>MBP12.0061.B03</string>
                        <string>MM11.0055.B08</string>
              </array>
              <key>DTCompiler</key>
              <string>com.apple.compilers.llvm.clang.1_0</string>
              <key>DTPlatformBuild</key>
              <string>5A11344p</string>
              <key>DTPlatformVersion</key>
              <string>GM</string>
              <key>DTSDKBuild</key>
              <string>13A566b</string>
              <key>DTSDKName</key>
              <string></string>
              <key>DTXcode</key>
              <string>0500</string>
              <key>DTXcodeBuild</key>
              <string>5A11344p</string>
              <key>LSApplicationCategoryType</key>
              <string>public.app-category.utilities</string>
              <key>LSMinimumSystemVersion</key>
              <string>10.9.0</string>
              <key>NSMainNibFile</key>
              <string>MainMenu</string>
              <key>NSPrincipalClass</key>
              <string>NSApplication</string>
              <key>PreESDRequiredModels</key>
              <array>
                        <string>MacBook7</string>
                        <string>MacBookAir5</string>
                        <string>MacBookPro10</string>
                        <string>MacPro5</string>
                        <string>Macmini6</string>
                        <string>iMac12</string>
              </array>
              <key>PreUEFIModels</key>
              <array>
                        <string>MacBook7</string>
                        <string>MacBookAir5</string>
                        <string>MacBookPro10</string>
                        <string>MacPro5</string>
                        <string>Macmini6</string>
                        <string>iMac13</string>
              </array>
              <key>PreUSBBootSupportedModels</key>
              <array>
                        <string>MacBook7,1</string>
                        <string>MacBookAir3,2</string>
                        <string>MacBookPro8,3</string>
                        <string>MacPro5,1</string>
                        <string>Macmini4,1</string>
                        <string>iMac12,2</string>
              </array>
              <key>Win7OnlyModels</key>
              <array>
                        <string>MacBook7,1</string>
                        <string>MacBookAir3,2</string>
                        <string>MacBookPro5,5</string>
                        <string>MacPro2,1</string>
                        <string>Macmini4,1</string>
                        <string>iMac10,1</string>
              </array>
    </dict>
    </plist>
    I have already tried this :
    https://discussions.apple.com/message/21796614#21796614
    and this:
    https://discussions.apple.com/thread/3435734?start=15&tstart=0
    but neither of them have helped me to get the bootcamp work properly. Every time i try to modify this fie i get an error.
    Please any help would be welcome.

    No problem, forget the daemon tools and Microsoft usb tool, use BooTcamp Assistant for making bootable usb of windows 7 using that .iso.
    you can do the following :
    1. Add your Boot Rom Version(from system info) under DARequiredROMVersions.
    2. Add Model Identifier(from system info) under PreUSBBootSupportedModels
    3. Delete "Pre" from "PreUSBBootSupportedModels", so you have "USBBootSupportedModels"
    The first 3 steps are same as before and if its not clear you can easily google solutions with screenshots.
    The next step is only for OSX 10.9, as it employs some kind of code signature to prevent you from changing info.plist and cause bootcamp to crash.
    4. Open your terminal, use the following command
    sudo codesign -fs - /Applications/Utilities/Boot\ Camp\ Assistant.app
    Sudo means using administrator privilege and u need to enter your mac password. And the command resigns the bootcamp application so that it runs with the new info.plist file and not crash.
    5. Continue on with your installation....
    Cheers.
    P.S. back up info.plist before u change anything.
    I installed windows 7 ultimate 64 bit two days ago using this mehod. It is working perfectly. Hope this will solve your problem.Please do make a backup of ur macbook before partition, for safe side.
    while using that command mentioned in step 4., may be you get a option to download xcode or something like that, just click ok and download and install that, in my case it was about 101MB.

  • I've messed up my boot camp partition and would love some help :)

    OK So here's what I've done..
    I removed my optical drive, inserted a hard drive caddy, moved my main 750GB hard drive to this location, installed a brand new 250GB SSD, installed Mavericks on said SSD, and booted up.  Everything was happy.  But now I have 550 GB of my 750GB taken up by my old install of OSX.  I took all of my files off, put them on an external drive, and formatted the OSX Journaled portion of the hard drive to ExFat.  This, of course, broke the ability to boot from Windows.
    My goal:
    250GB SSD: OSX
    750 Hard Drive: 200GB to Windows, the remaining in a format writable to both Windows and Mac. (which is why I chose ExFat).
    And, obviously, the ability to boot from either.
    What do I do?  I don't have any of my original install media from Windows (I think it was a W7 install that I upgraded with a download to W8 from M$'s website).  I'd like to retain everything that's installed there already on BC and just repair it somehow.  I've read around that ReFit might help.  I'm willing to try it if the general consensus says that's the way to go.
    Also, I've noticed that when I changed my user account to be able to store on my ExFat drive, that it can never finish indexing and I can't install dropbox.  Is there a better solution to what I'm trying to do?

    So, since I got no bites here... How about this...
    I formatted that ExFat partition to a Mac OS Journaled partition, and my computer seems to be working great.  I will keep it like this.  Anyone know how to repair that Windows install from BootCamp?

  • AutoCad 2007 running slow on Boot Camp

    I have MBP late 2009 with 3.06 processor and 4 GB Ram.
    After installation of WIn 7 Ultimate 64 bit and VMvare fusion, Mac OS start to run slowly. When i open Autocad via VMvare, Autocad is running enormously slow.
    Can someone please advice me what to do?
    Tnc

    Vlatko Mihajlov wrote:
    I have MBP late 2009 with 3.06 processor and 4 GB Ram.
    After installation of WIn 7 Ultimate 64 bit and VMvare fusion, Mac OS start to run slowly. When i open Autocad via VMvare, Autocad is running enormously slow.
    Can someone please advice me what to do?
    Tnc
    Are you using Bootcamp, as stated in your subject line, or are you using Fusion? If using Fusion, Autocad is sharing your computer's resources. If using Bootcamp Autocad is using all the computer's resources. Do as already suggested, run Windows in Bootcamp to make use of all the computer's resources when running Autocad.

  • BSOD every 20 minutes running windows XP in boot camp partition

    Has anyone else had this problem? Everything was running fine for a couple of months on my new mac OS X until around the time I installed the recommended updater to Boot Camp 2.1, then Windows XP started crashing every 20 minutes exactly, BCCode : 1000007f. One line of discussion suggests it's a boot camp problem but uninstalling the update hasn't helped. Others seemed to think it might be a graphics card incompatibility. I've now been advised that it's a Norton 2008 problem and I should uninstall that although I haven't tried yet. But the every 20 minutes must be some clue to what's going on. Does anyone have any ideas?

    Thanks Axel. I removed Norton 2008 with the uninstall tool and hey presto no more BSODs so far (24 hours). I've also replaced Norton with Kaspersky. I guess this is really a Norton/Boot Camp compatibility problem but it's weird that Norton ran without problems on my system for five months until I installed the Boot Camp 2.1 updater. Having said that, I now see that there are a couple of discussions on this in the Boot Camp > Installation and Storage topic list ...
    In one of these, Mark Davidson3 resolved the problem by completely uninstalling/reinstalling his Boot Camp partition and is now running Norton again with no problem but I wonder if that's because he must have uninstalled/reinstalled Norton in the process. Like me, the crashes had started for him only after he installed the Boot Camp 2.1 updater. Presumably Norton would run again on my system now too if I reinstalled it.
    Has anyone out there talked to the Norton/Boot Camp people about this?

  • Want to upgrade Windows and migrate to a new Boot Camp partition

    I'm a dedicated Mac user who must on occasion use Windows at work.
    Knowing that it's always best to make changes one step at a time, I'm looking for recommendations before embarking on a multi-step upgrade and migration:
    CURRENT SET-UP:
    MBP 2009, Core 2 Duo, 3.06 gHz, 8Gb RAM, 500 gb hd
    OSX Lion10.7.1
    Parallels 7
    Windows XP SP2
    No Boot Camp Partition
    GOALS:
    Create a Boot Camp partition and migrate Windows to there
    This will allow me to keep all my Windows files in one place and have access to them regardless of whether I boot into Windows natively via Boot Camp or via a virtual device using Parallels
    Upgrade to XP to Windows 7 using Windows 7 Pro Upgrade for Vista
    I bought this as a pre-release two whole years ago
    Hey -- was told then on the MS web site that this path would work...
    Use iCloud to sync my Apple stuff with my Windows stuff (Calendar, Contacts)
    I currently do this successfully via MobileMe and Outlook Exchange
    However, iCloud requires that syncing with Windows requires Vista or newer (so gotta go to Windows 7, 'cuz ain't going Vista)
    Migrate all my Windows applications and files without having to do clean installs
    I know, clean installs are always better
    However, IT support at work is always overloaded, so I choose this route for now
    Also, I regularly use Super Duper to back-up (clone) my internal HD  -- and have restored a number of times, always successfully -- so that necessary step is well covered.
    Any recommendations?
    Thanks in advance.

    I ended up deleting my WinXP partition and the upgrade to OSX 10.7 went fine.

  • Boot Camp Partition no longer shows in StartUp Control Panel

    My Boot Camp partition no longer shows in StartUp Control Panel, but does show up using Option Key at startup. This started soon after the latest Parallels update. The Boot Camp partition seems normal and healthy in the finder. Once started via the Option Key, Windows XP-SP3 runs fine. Upgrading to BC 3.0 did not have any affect.
    I've tried LOTS of troubleshooting strategies, including completely deinstalling Parallels. Deleting obvious preferences, etc.. No joy.
    Any suggestions?

    Hi,
    if I remember correctly Parallels installs some kind of file system driver to OSX to access NTFS files system partitions.
    The 'case of the missing Windows partition' is widely spread when using these NTFS file system drivers in OSX.
    (Others are NTFS-3G; Paragons NTFS for Mac and Tuxera NTFS for Mac).
    To my knowledge there is no other remedy to this phenomenon then to deinstall the NTFS drivers.
    But as long as the Option-key is working maybe you can live with it.
    Or use rEFIt http://refit.sourceforge.net/ as a Boot-Menu.
    Regards
    Stefan

  • Copying a disk which has a boot camp partition

    Colleague has an iMac with a boot camp partition, and the disk has failed.  It won't boot off the mac partition, although the windows partition works fine.  He bought a new 1T disk and we are trying to copy his disk on to it, and will then install the new disk into the iMac.
    So it's booted up using the SnowLeopard install disk and I am running disk utility.  First I tried to partition the disk into something that looks like the partition scheme on the current disk -- big partition for os x, little partition for windows, although big & little are 750GB vs 250GB as opposed to the smaller version on the 260GB original.
    Then I tried to use the Restore to go from the old bootcamp partition to the new MS-DOS (fat) partition on the new drive.  This failed.  First it resized the fat partition down to an ever-so-slightly smaller partition than the NTFS original, and then generated an error because the partition is too small.
    How do we do this?

    Loner T wrote:
    1. Do you have a TM backup of the OSX which came from this "failed" disk? It may just be a matter of reinstalling OSX too work around bacd blocks?
    My boss tried that about a year ago, but it failed again after not too long.
    2. What is the failure when switching to OSX from Windows?
    Not sure.  Now when I option-boot the machine I can't see either partition -- I can see the installer dvd and the new drive in its external enclosure.
    3. Windows can be installed only on the internal disk, which is a Windows restriction that BC enforces. Apple allows OS to installed on external drives. Ask Gates/Ballmer/Nadella why?
    4. Yes, you can get data of the disk, not matter how it is connected, internal or external. It is tricky to take a Volume and move it. Can I suggest an investment in Winclone to backup and restore (http://www.twocanoes.com/products/mac/winclone) Windows?
    5. Yes, but I would recommend putting Bootcamp Windows back as BC/Windows, rather than virtualizing it using Parallels.
    Well moving the new disk in to the iMac is one of the tasks we need to accomplish, so we can do it now.  My plan was to use dd to move the data from the partition on the old drive to the partition on the new drive, once we can get Boot Camp Assistant to create it.  Winclone looks like a great product, but it's $29.  Parallels is only $79, and if a disk fails or you migrate to new hardware all of the Parallels vms come over effortlessly using Setup Assistant or Migration Assistant.

  • Can no longer see Boot Camp Partition

    Hello all,
    I was having problems with booting into Boot Camp/Windows 7 (I was just getting a black screen), so I attempted to delete the boot camp partition and reinstall it.  When I did that, the program hung for a while, and finally said there was an error deleting the partition.  However, it appears it like halfway deleted it, as it no longer shows up!  When I go into disk utility, Macintosh HD shows blue, and then there is a 50 GB partition (the size of my bootcamp) that is white, but it is unlabeled.  I cannot adjust the partition to make it the whole HD, and if I go to boot camp assistant, and try to make a new bootcamp partition, it bounces back with an error message as well.  I am wondering how I can restore the partition back to the original all mac hd partition..ANy help would be greatly appreciated!!
    Kevin

    WinClone 3 $20
    When you move to a new OS: clone your system, make sure you have backups you can use - for each - the partition table "rules" change with each new OS. And you want to reformat a drive from time to time especially then.
    Carbon Copy Cloner 3.4 is a good way to clone your OS X partitions.
    Basically, "start over" and restore to one HFS volume with OS X then run Boot Camp Assistant, then restore with Winclone image you made easier.
    www.apple.com/support/bootcamp
    Find CCC and WinClone www.macupdate.com

  • How do I create a Boot Camp partition with Windows & blank NTFS partitions?

    I'm trying to create this kind of setup:
    OS X partition
    Windows 7 partition
    blank NTFS partition (no OS)
    blank NTFS partition (no OS)
    This would be much easier if I created just the OS X partition and the Windows 7 partition with the Boot Camp Assistant tool (done this many times before successfully on other computers). The problem begins when I try to split the Boot Camp partition through the Windows 7 DVD partition manager during setup by deleting the Boot Camp partition, and recreating three partitions from the unallocated space. After installing Windows 7 on one of those new three partitions, I'm getting all kinds of startup errors when I try to install the Boot Camp drivers.
    What would the best way to achieve this setup?

    Yes, I researched many options for three partition dual boot set ups. After many trials and tribulations, there is a simple method that I have used on multiple MBPs.
    1. Run Boot Camp Assistant, as per the Boot Camp Installation and Setup Guide. Once you have Mac OS X and Windows 7 set up, check the partitions and back them up (with Time Machine, and Winclone).
    2. Get iPartition, and resize the Mac and Windows partitions to what you want, say 100GB each, and set up your other partitions to the size you want. I put mine "after" the Windows partition, at the end of the disk, and have had no problems. It takes a few minutes to create the bootable CD for iPartition, but you get everything you need to do so from Coriolis Systems. You will need your Mac OS X installl disc.
    3. Install Paragon's HFS+ for Windows and NTFS for Mac, and everybody can read and write everything.
    4. I have both Time Machine and Norton 360 back up the Data partitions, just in case -- to an external drive, of course.
    You can boot to either OS and access any partition.

  • Backup to TImeCapsule including Boot Camp partition

    I used Boot Camp to install Windows 7 Professional on my new MacBook Air, and have now got Parallels Desktop 6 for Mac working OK with a Windows Virtual Machine. But I am reluctant to remove the Boot Camp partition. Now I have got TIme Capsule/Time Machine working OK for automatic backups - but the BootCamp/Windows stuff is not being backed up. Can anyone tell me how to include the Boot Camp partition and all my Windows-based work in the automatic backup 'of the entire machine' (the reason I bought a Time Capsule) to Time Capsule? It seems that only the MAC side of the machine is being backed up hourly by Time Machine. Can't find anything in Knowledge Base or Help about this. Thanks!

    verycactus wrote:
    I want to keep this discussion on MacBook Air not go to BootCamp topic because I need a wireless backup solution.
    I'm suggesting you go there to find an app that will backup your BootCamp partition to a Time Capsule. I don't know if WinClone can do that, or if there are better options.
    If I can partition my Mac using Boot Camp, is it possible to partition the Time Capsule
    No. But you can create a +disk image+ on it, and back up the Windoze side to it, if you can find an app that will work. See the blue box in #Q3 of [Using Time Machine with a Time Capsule|http://web.me.com/pondini/TimeMachine/TimeCapsule.html] (or use the link in *User Tips* at the top of the +Time Capsule+ forum).
    you sold me all the bits, what's the answer please?
    You're not talking to Apple here. We're just ordinary users, like you, volunteering our time, with the rare exception of an Apple employee posting here on his/her own time (and identified by a silver Apple logo), and in the +Discussions Feedback+ forum, where the Hosts (identified by a purple Apple logo) will post about the Discussions themselves, not technical issues.
    Click +Help & Terms of Use+ at the right of this page for details.
    I'd email Support but there's no email Support offered and I can hardly phone USA from Australia trying to get an answer to this.
    Click +Contact Us+ at the bottom of the page to find numbers in Australia.
    Maybe a Genius in my local retail Apple store can help?
    Possible. But they generally don't seem to have much training on Time Machine or Time Capsules.
    Info on the whole question of backup & data protection is fairly thin in the Apple world - or am I looking in tihe wrong place or calling it the wrong thing? thanks
    For information on 3rd-party utilities to use with BootCamp, try the Boot Camp forum. For information on Time Machine, try the +Snow Leopard > Time Machine+ forum. There are several *User Contributed Tips* at the top of that forum. For Time Capsule questions/issues, there's a +Time Capsule+ forum in the +Digital Life+ section.

  • Boot Camp partition no longer loads/re-installs.

    Hello everyone,
    I'm having a strange issue with Boot Camp(or possibly my Hard Drive in general). I had a working Win7 Ultimate 32-bit partition last night, then rebooted into Mac OS X Mountain Lion (10.8.2). I tried rebooting into Windows 7 this morning, and it goes to a blank black screen(without the blinking cursor), and never loaded the OS. I tried accessing the Windows Boot menu to turn on visual debugging/safe mode/recovery console, and I never access that menu. I grabbed my Win7 install disc, and it also boots to a black screen. I was only able to get some display when I used a 64-bit only disc, and even that only gave me the "Windows is loading files" progress bar, and stayed there once the bar had filled.
    I stuck an Arch Linux boot disc in the system, and was able to boot all the way to a bash console.
    I then decided to back up my files, remove the Boot Camp partition and reinstall Windows 7. Same results as above. I never get to the installer to finish loading the Windows installer.
    Anyone have any ideas?
    Message was edited by: LKHetzel --- verbiage

    Hi,
    if I remember correctly Parallels installs some kind of file system driver to OSX to access NTFS files system partitions.
    The 'case of the missing Windows partition' is widely spread when using these NTFS file system drivers in OSX.
    (Others are NTFS-3G; Paragons NTFS for Mac and Tuxera NTFS for Mac).
    To my knowledge there is no other remedy to this phenomenon then to deinstall the NTFS drivers.
    But as long as the Option-key is working maybe you can live with it.
    Or use rEFIt http://refit.sourceforge.net/ as a Boot-Menu.
    Regards
    Stefan

Maybe you are looking for