Param targetName not provided

hi,
i use oracle 10g, when i try to do a backup of archived log or backup of integrality of database or " DELETE NOPROMPT OBSOLETE;" to delete obsolete backup
with Entreprise manager i have this message "DELETE NOPROMPT OBSOLETE" in the initialization of the job.

lido wrote:
hi,
i use oracle 10g, when i try to do a backup of archived log or backup of integrality of database or " DELETE NOPROMPT OBSOLETE;" to delete obsolete backup
with Entreprise manager i have this message "DELETE NOPROMPT OBSOLETE" in the initialization of the job.so remove it & no error will be thrown

Similar Messages

  • Apply Patch - Param COMPONENT_URN not provide

    I am basically following the offical documentation to update my Oracle 11.1.0.6.0 (Redhat Linux 64bit) via the Enterprise Manager:
    http://download.oracle.com/docs/cd/B28359_01/server.111/b28301/software002.htm
    Currently I am stucked with a failure due to the following message:
    Param COMPONENT_URN not provided
    I have not find any information about this on the web.
    Any ideas, any more infos needed
    Many thanks in advance

    Hm, must reopen this.
    Note 468344.1 seems to imply that the OUI_OPATCH component is truly missing.
    In effect I can find the component already existing in the components overview as detailed in the note. So as fas as I understand the error message I have is not covered by this note's described effect.
    I assume that there is some parameter wrong rather then it can not be used at all.

  • Remote faxing error - A fax number was not provided.

    I have a USRobotics 5637 Fax / Modem attached to a Mac Mini. I can send and receive faxes on the Mini.
    I have enabled printer sharing on the Mini. User rights are everyone is allowed to print. When I try to print to the shared fax from my MacBook Air, The Mini does not send the fax. CUPS provides this error:
    USB_Modem-153
    Unknown
    Withheld
    18k
    Unknown
    completed at
    Mon Aug 12 16:36:37 2013
    "A fax number was not provided."
    So the MacBook Air sees the Fax on the Mini and the job gets sent to the Mini but the fax number apparently does not get sent to the print server. Both machines are running 10.8.4 and are connected to the same (hardwired) network.
    Is there something I am missing. I type the fax number in on the Air and I have tried various formats (xxx-xxxx, (xxx) xxx-xxxx, xxxxxxx etc) just to see if this makes a difference but no luck.
    I have attached the CUPS log file below: There is the USR fax/modem as well as a Brother MFC printer configured.
    Any suggestions?
    Thank you
    D [12/Aug/2013:16:59:29 -0300] cupsdSetBusyState: newbusy="Not busy", busy="Not busy"
    D [12/Aug/2013:16:59:56 -0300] [Client 21] Accepted from 192.168.1.20:631 (IPv4)
    D [12/Aug/2013:16:59:56 -0300] Report: clients=1
    D [12/Aug/2013:16:59:56 -0300] Report: jobs=147
    D [12/Aug/2013:16:59:56 -0300] Report: jobs-active=0
    D [12/Aug/2013:16:59:56 -0300] Report: printers=2
    D [12/Aug/2013:16:59:56 -0300] Report: stringpool-string-count=4968
    D [12/Aug/2013:16:59:56 -0300] Report: stringpool-alloc-bytes=10648
    D [12/Aug/2013:16:59:56 -0300] Report: stringpool-total-bytes=67184
    D [12/Aug/2013:16:59:56 -0300] [Client 21] POST /printers/USB_Modem HTTP/1.1
    D [12/Aug/2013:16:59:56 -0300] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
    D [12/Aug/2013:16:59:56 -0300] [Client 21] No authentication data provided.
    D [12/Aug/2013:16:59:56 -0300] [Client 21] 2.0 Get-Printer-Attributes 1
    D [12/Aug/2013:16:59:56 -0300] Get-Printer-Attributes ipps://mini.local.:631/printers/USB_Modem
    D [12/Aug/2013:16:59:56 -0300] Returning IPP successful-ok for Get-Printer-Attributes (ipps://mini.local.:631/printers/USB_Modem) from 192.168.1.20
    D [12/Aug/2013:16:59:56 -0300] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
    D [12/Aug/2013:16:59:56 -0300] [Client 21] POST /printers/USB_Modem HTTP/1.1
    D [12/Aug/2013:16:59:56 -0300] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
    D [12/Aug/2013:16:59:56 -0300] [Client 21] No authentication data provided.
    D [12/Aug/2013:16:59:56 -0300] [Client 21] 2.0 Validate-Job 2
    D [12/Aug/2013:16:59:56 -0300] Validate-Job ipps://mini.local.:631/printers/USB_Modem
    D [12/Aug/2013:16:59:56 -0300] Returning IPP successful-ok for Validate-Job (ipps://mini.local.:631/printers/USB_Modem) from 192.168.1.20
    D [12/Aug/2013:16:59:56 -0300] cupsdSetBusyState: newbusy="Not busy", busy="Active clients"
    D [12/Aug/2013:16:59:56 -0300] [Client 22] Accepted from 192.168.1.20:631 (IPv4)
    D [12/Aug/2013:16:59:56 -0300] [Client 21] POST /printers/USB_Modem HTTP/1.1
    D [12/Aug/2013:16:59:56 -0300] cupsdSetBusyState: newbusy="Active clients", busy="Not busy"
    D [12/Aug/2013:16:59:56 -0300] [Client 21] No authentication data provided.
    D [12/Aug/2013:16:59:56 -0300] [Client 22] POST /printers/USB_Modem HTTP/1.1
    D [12/Aug/2013:16:59:56 -0300] cupsdSetBusyState: newbusy="Active clients", busy="Active clients"
    D [12/Aug/2013:16:59:56 -0300] [Client 22] No authentication data provided.
    D [12/Aug/2013:16:59:56 -0300] [Client 21] 2.0 Create-Job 3
    D [12/Aug/2013:16:59:56 -0300] Create-Job ipps://mini.local.:631/printers/USB_Modem
    D [12/Aug/2013:16:59:56 -0300] cupsdMarkDirty(---J-)
    D [12/Aug/2013:16:59:56 -0300] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients"
    D [12/Aug/2013:16:59:56 -0300] add_job: requesting-user-name="ufa"
    D [12/Aug/2013:16:59:56 -0300] Adding default job-sheets values "none,none"...
    I [12/Aug/2013:16:59:56 -0300] [Job 154] Adding start banner page "none".
    D [12/Aug/2013:16:59:56 -0300] Discarding unused job-created event...
    I [12/Aug/2013:16:59:56 -0300] [Job 154] Queued on "USB_Modem" by "ufa".
    D [12/Aug/2013:16:59:56 -0300] Returning IPP successful-ok for Create-Job (ipps://mini.local.:631/printers/USB_Modem) from 192.168.1.20
    D [12/Aug/2013:16:59:56 -0300] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
    D [12/Aug/2013:16:59:56 -0300] [Client 22] 2.0 Get-Printer-Attributes 4
    D [12/Aug/2013:16:59:56 -0300] Get-Printer-Attributes ipps://mini.local.:631/printers/USB_Modem
    D [12/Aug/2013:16:59:56 -0300] Returning IPP successful-ok for Get-Printer-Attributes (ipps://mini.local.:631/printers/USB_Modem) from 192.168.1.20
    D [12/Aug/2013:16:59:56 -0300] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
    D [12/Aug/2013:16:59:56 -0300] [Client 23] Accepted from localhost (Domain)
    D [12/Aug/2013:16:59:56 -0300] [Client 21] POST /printers/USB_Modem HTTP/1.1
    D [12/Aug/2013:16:59:56 -0300] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
    D [12/Aug/2013:16:59:56 -0300] [Client 21] No authentication data provided.
    D [12/Aug/2013:16:59:56 -0300] [Client 23] POST / HTTP/1.1
    D [12/Aug/2013:16:59:56 -0300] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
    D [12/Aug/2013:16:59:56 -0300] [Client 23] No authentication data provided.
    D [12/Aug/2013:16:59:56 -0300] [Client 21] 2.0 Send-Document 5
    D [12/Aug/2013:16:59:56 -0300] [Client 23] 2.0 Get-Jobs 30
    D [12/Aug/2013:16:59:56 -0300] Get-Jobs ipp://localhost:631/printers/USB_Modem
    D [12/Aug/2013:16:59:56 -0300] Returning IPP successful-ok for Get-Jobs (ipp://localhost:631/printers/USB_Modem) from localhost
    D [12/Aug/2013:16:59:56 -0300] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
    D [12/Aug/2013:16:59:56 -0300] Send-Document ipps://mini.local.:631/printers/USB_Modem
    D [12/Aug/2013:16:59:56 -0300] cupsdIsAuthorized: requesting-user-name="ufa"
    D [12/Aug/2013:16:59:56 -0300] [Job 154] Auto-typing file...
    D [12/Aug/2013:16:59:56 -0300] [Job 154] Request file type is image/tiff.
    D [12/Aug/2013:16:59:56 -0300] cupsdMarkDirty(---J-)
    D [12/Aug/2013:16:59:56 -0300] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
    I [12/Aug/2013:16:59:56 -0300] [Job 154] File of type image/tiff queued by "ufa".
    I [12/Aug/2013:16:59:56 -0300] [Job 154] Adding end banner page "none".
    D [12/Aug/2013:16:59:56 -0300] cupsdMarkDirty(---J-)
    D [12/Aug/2013:16:59:56 -0300] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
    D [12/Aug/2013:16:59:56 -0300] [Job 154] time-at-processing=1376337596
    D [12/Aug/2013:16:59:56 -0300] cupsdMarkDirty(---J-)
    D [12/Aug/2013:16:59:56 -0300] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
    D [12/Aug/2013:16:59:56 -0300] Asserting dark wake.
    D [12/Aug/2013:16:59:56 -0300] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
    D [12/Aug/2013:16:59:56 -0300] Discarding unused printer-state-changed event...
    D [12/Aug/2013:16:59:56 -0300] [Job 154] job-sheets=none,none
    D [12/Aug/2013:16:59:56 -0300] [Job 154] argv[0]="USB_Modem"
    D [12/Aug/2013:16:59:56 -0300] [Job 154] argv[1]="154"
    D [12/Aug/2013:16:59:56 -0300] [Job 154] argv[2]="ufa"
    D [12/Aug/2013:16:59:56 -0300] [Job 154] argv[3]="untitled text 6"
    D [12/Aug/2013:16:59:56 -0300] [Job 154] argv[4]="1"
    D [12/Aug/2013:16:59:56 -0300] [Job 154] argv[5]="job-uuid=urn:uuid:f1a61d10-1959-3fc1-7248-88abadd7e431 job-originating-host-name=192.168.1.20 time-at-creation=1376337596 time-at-processing=1376337596"
    D [12/Aug/2013:16:59:56 -0300] [Job 154] argv[6]="/private/var/spool/cups/d00154-001"
    D [12/Aug/2013:16:59:56 -0300] [Job 154] envp[0]="<CFProcessPath>"
    D [12/Aug/2013:16:59:56 -0300] [Job 154] envp[1]="CUPS_CACHEDIR=/private/var/spool/cups/cache"
    D [12/Aug/2013:16:59:56 -0300] [Job 154] envp[2]="CUPS_DATADIR=/usr/share/cups"
    D [12/Aug/2013:16:59:56 -0300] [Job 154] envp[3]="CUPS_DOCROOT=/usr/share/doc/cups"
    D [12/Aug/2013:16:59:56 -0300] [Job 154] envp[4]="CUPS_FONTPATH=/usr/share/cups/fonts"
    D [12/Aug/2013:16:59:56 -0300] [Job 154] envp[5]="CUPS_REQUESTROOT=/private/var/spool/cups"
    D [12/Aug/2013:16:59:56 -0300] [Job 154] envp[6]="CUPS_SERVERBIN=/usr/libexec/cups"
    D [12/Aug/2013:16:59:56 -0300] [Job 154] envp[7]="CUPS_SERVERROOT=/private/etc/cups"
    D [12/Aug/2013:16:59:56 -0300] [Job 154] envp[8]="CUPS_STATEDIR=/private/etc/cups"
    D [12/Aug/2013:16:59:56 -0300] [Job 154] envp[9]="HOME=/private/var/spool/cups/tmp"
    D [12/Aug/2013:16:59:56 -0300] [Job 154] envp[10]="PATH=/usr/libexec/cups/filter:/usr/bin:/usr/sbin:/bin:/usr/bin"
    D [12/Aug/2013:16:59:56 -0300] [Job 154] envp[11]="[email protected]"
    D [12/Aug/2013:16:59:56 -0300] [Job 154] envp[12]="SOFTWARE=CUPS/1.6.2"
    D [12/Aug/2013:16:59:56 -0300] [Job 154] envp[13]="TMPDIR=/private/var/spool/cups/tmp"
    D [12/Aug/2013:16:59:56 -0300] [Job 154] envp[14]="USER=root"
    D [12/Aug/2013:16:59:56 -0300] [Job 154] envp[15]="CUPS_MAX_MESSAGE=2047"
    D [12/Aug/2013:16:59:56 -0300] [Job 154] envp[16]="CUPS_SERVER=/private/var/run/cupsd"
    D [12/Aug/2013:16:59:56 -0300] [Job 154] envp[17]="CUPS_ENCRYPTION=IfRequested"
    D [12/Aug/2013:16:59:56 -0300] [Job 154] envp[18]="IPP_PORT=631"
    D [12/Aug/2013:16:59:56 -0300] [Job 154] envp[19]="CHARSET=utf-8"
    D [12/Aug/2013:16:59:56 -0300] [Job 154] envp[20]="LANG=en_US.UTF-8"
    D [12/Aug/2013:16:59:56 -0300] [Job 154] envp[21]="APPLE_LANGUAGE=en-US"
    D [12/Aug/2013:16:59:56 -0300] [Job 154] envp[22]="PPD=/private/etc/cups/ppd/USB_Modem.ppd"
    D [12/Aug/2013:16:59:56 -0300] [Job 154] envp[23]="RIP_MAX_CACHE=128m"
    D [12/Aug/2013:16:59:56 -0300] [Job 154] envp[24]="CONTENT_TYPE=image/tiff"
    D [12/Aug/2013:16:59:56 -0300] [Job 154] envp[25]="DEVICE_URI=fax://dev/cu.usbmodem0000001"
    D [12/Aug/2013:16:59:56 -0300] [Job 154] envp[26]="PRINTER_INFO=FAX"
    D [12/Aug/2013:16:59:56 -0300] [Job 154] envp[27]="PRINTER_LOCATION=mini"
    D [12/Aug/2013:16:59:56 -0300] [Job 154] envp[28]="PRINTER=USB_Modem"
    D [12/Aug/2013:16:59:56 -0300] [Job 154] envp[29]="PRINTER_STATE_REASONS=none"
    D [12/Aug/2013:16:59:56 -0300] [Job 154] envp[30]="CUPS_FILETYPE=document"
    D [12/Aug/2013:16:59:56 -0300] [Job 154] envp[31]="FINAL_CONTENT_TYPE=printer/USB_Modem"
    D [12/Aug/2013:16:59:56 -0300] [Job 154] envp[32]="AUTH_I****"
    I [12/Aug/2013:16:59:56 -0300] [Job 154] Started filter /usr/libexec/cups/filter/cgimagetopdf (PID 51019)
    I [12/Aug/2013:16:59:56 -0300] [Job 154] Started filter /usr/libexec/cups/filter/cgpdftoraster (PID 51020)
    I [12/Aug/2013:16:59:56 -0300] [Job 154] Started filter /usr/libexec/cups/filter/rastertotiff (PID 51021)
    I [12/Aug/2013:16:59:56 -0300] [Job 154] Started backend /usr/libexec/cups/backend/fax (PID 51022)
    D [12/Aug/2013:16:59:56 -0300] Discarding unused job-state-changed event...
    D [12/Aug/2013:16:59:56 -0300] Returning IPP successful-ok for Send-Document (ipps://mini.local.:631/printers/USB_Modem) from 192.168.1.20
    D [12/Aug/2013:16:59:56 -0300] [Client 22] POST /printers/USB_Modem HTTP/1.1
    D [12/Aug/2013:16:59:56 -0300] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients and dirty files"
    D [12/Aug/2013:16:59:56 -0300] [Client 22] No authentication data provided.
    D [12/Aug/2013:16:59:56 -0300] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Active clients, printing jobs, and dirty files"
    D [12/Aug/2013:16:59:56 -0300] [Client 22] 2.0 Get-Job-Attributes 6
    D [12/Aug/2013:16:59:56 -0300] Get-Job-Attributes ipps://mini.local.:631/printers/USB_Modem
    D [12/Aug/2013:16:59:56 -0300] Returning IPP successful-ok for Get-Job-Attributes (ipps://mini.local.:631/printers/USB_Modem) from 192.168.1.20
    D [12/Aug/2013:16:59:56 -0300] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
    D [12/Aug/2013:16:59:56 -0300] [Client 21] HTTP_WAITING Closing on EOF
    D [12/Aug/2013:16:59:56 -0300] [Client 21] Closing connection.
    D [12/Aug/2013:16:59:56 -0300] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
    D [12/Aug/2013:16:59:56 -0300] [Client 22] HTTP_WAITING Closing on EOF
    D [12/Aug/2013:16:59:56 -0300] [Client 22] Closing connection.
    D [12/Aug/2013:16:59:56 -0300] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
    D [12/Aug/2013:16:59:56 -0300] [Client 21] Accepted from 192.168.1.20:631 (IPv4)
    D [12/Aug/2013:16:59:56 -0300] [Client 21] POST /printers/USB_Modem HTTP/1.1
    D [12/Aug/2013:16:59:56 -0300] cupsdSetBusyState: newbusy="Active clients, printing jobs, and dirty files", busy="Printing jobs and dirty files"
    D [12/Aug/2013:16:59:56 -0300] [Client 21] No authentication data provided.
    D [12/Aug/2013:16:59:56 -0300] [Client 21] 2.0 Get-Job-Attributes 7
    D [12/Aug/2013:16:59:56 -0300] Get-Job-Attributes ipps://mini.local.:631/printers/USB_Modem
    D [12/Aug/2013:16:59:56 -0300] Returning IPP successful-ok for Get-Job-Attributes (ipps://mini.local.:631/printers/USB_Modem) from 192.168.1.20
    D [12/Aug/2013:16:59:56 -0300] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Active clients, printing jobs, and dirty files"
    D [12/Aug/2013:16:59:56 -0300] [Job 154] cgpdftoraster: copying to temp print file "/private/var/spool/cups/tmp/0c74c52155d4d"
    D [12/Aug/2013:16:59:56 -0300] [Job 154] cgimagetopdf - document title: "untitled text 6"
    D [12/Aug/2013:16:59:56 -0300] [Job 154] cgimagetopdf - filename: "/private/var/spool/cups/d00154-001"...
    D [12/Aug/2013:16:59:56 -0300] [Job 154] cgimagetopdf - opened PPD file "/private/etc/cups/ppd/USB_Modem.ppd"...
    D [12/Aug/2013:16:59:56 -0300] [Job 154] cgimagetopdf - dpi: (204, 196), orientation = 1...
    E [12/Aug/2013:16:59:56 -0300] [Job 154] A fax number was not provided.
    D [12/Aug/2013:16:59:56 -0300] cupsdMarkDirty(---J-)
    D [12/Aug/2013:16:59:56 -0300] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
    D [12/Aug/2013:16:59:56 -0300] cupsdMarkDirty(---J-)
    D [12/Aug/2013:16:59:56 -0300] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
    D [12/Aug/2013:16:59:56 -0300] [Job 154] Set job-printer-state-message to "A fax number was not provided.", current level=ERROR
    D [12/Aug/2013:16:59:56 -0300] Discarding unused job-progress event...
    D [12/Aug/2013:16:59:56 -0300] Discarding unused printer-state-changed event...
    D [12/Aug/2013:16:59:56 -0300] [Job 154] PID 51022 (/usr/libexec/cups/backend/fax) exited with no errors.
    D [12/Aug/2013:16:59:56 -0300] [Job 154] PID 51019 (/usr/libexec/cups/filter/cgimagetopdf) exited with no errors.
    D [12/Aug/2013:16:59:56 -0300] [Job 154] cgpdftoraster: “/private/var/spool/cups/tmp/0c74c52155d4dâ€&#157; has 1 pages.
    D [12/Aug/2013:16:59:56 -0300] [Job 154] cgpdftoraster: opened PPD file "/private/etc/cups/ppd/USB_Modem.ppd"...
    D [12/Aug/2013:16:59:56 -0300] [Job 154] cgpdftoraster: size->width = 612, size->length = 792, size->top = 773.4, size->bottom = 18.6, size->left = 16.6, size->right = 595.4
    D [12/Aug/2013:16:59:56 -0300] [Job 154] cgpdftoraster: PreferredRotation = 90
    D [12/Aug/2013:16:59:56 -0300] [Job 154] cgpdftoraster: languageLevel = 3, mediaBox.size.width = 612, mediaBox.size.height = 792
    D [12/Aug/2013:16:59:56 -0300] [Job 154] cgpdftoraster: colorspace = 3, bitsPerColor = 1
    D [12/Aug/2013:16:59:56 -0300] [Job 154] cgpdftoraster: band width = 1640, bytesPerRow = 1640, band height = 2055, height = 2055
    D [12/Aug/2013:16:59:56 -0300] [Job 154] cgpdftoraster: context width = 1640, height = 2055, bitsPerComponent = 8, bitsPerPixel = 8, bytesPerRow = 1640, bitmapInfo = 0, resolution = (204.000000, 196.000000)
    D [12/Aug/2013:16:59:56 -0300] [Job 154] cgpdftoraster: bytes written for side 1 = 421275
    D [12/Aug/2013:16:59:56 -0300] [Job 154] rastertotiff read page 1 (421275 bytes)
    D [12/Aug/2013:16:59:56 -0300] [Job 154] PID 51020 (/usr/libexec/cups/filter/cgpdftoraster) exited with no errors.
    D [12/Aug/2013:16:59:56 -0300] [Job 154] PID 51021 (/usr/libexec/cups/filter/rastertotiff) did not catch or ignore signal 13.
    D [12/Aug/2013:16:59:56 -0300] [Job 154] time-at-completed=1376337596
    D [12/Aug/2013:16:59:56 -0300] Discarding unused job-completed event...
    I [12/Aug/2013:16:59:56 -0300] [Job 154] Job completed.
    D [12/Aug/2013:16:59:56 -0300] cupsdMarkDirty(---J-)
    D [12/Aug/2013:16:59:56 -0300] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
    D [12/Aug/2013:16:59:56 -0300] cupsdSetBusyState: newbusy="Printing jobs and dirty files", busy="Printing jobs and dirty files"
    D [12/Aug/2013:16:59:56 -0300] Discarding unused printer-state-changed event...
    D [12/Aug/2013:16:59:57 -0300] [Client 22] Accepted from 192.168.1.20:631 (IPv4)
    D [12/Aug/2013:16:59:57 -0300] [Job 154] Unloading...
    D [12/Aug/2013:16:59:57 -0300] [Client 22] POST /printers/USB_Modem HTTP/1.1
    D [12/Aug/2013:16:59:57 -0300] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Printing jobs and dirty files"
    D [12/Aug/2013:16:59:57 -0300] Releasing dark wake assertion.
    D [12/Aug/2013:16:59:57 -0300] [Client 22] No authentication data provided.
    D [12/Aug/2013:16:59:57 -0300] [Client 21] HTTP_WAITING Closing on EOF
    D [12/Aug/2013:16:59:57 -0300] [Client 21] Closing connection.
    D [12/Aug/2013:16:59:57 -0300] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
    D [12/Aug/2013:16:59:57 -0300] [Client 21] Accepted from 192.168.1.20:631 (IPv4)
    D [12/Aug/2013:16:59:57 -0300] [Client 23] POST / HTTP/1.1
    D [12/Aug/2013:16:59:57 -0300] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
    D [12/Aug/2013:16:59:57 -0300] [Client 23] No authentication data provided.
    D [12/Aug/2013:16:59:57 -0300] [Client 24] Accepted from localhost (Domain)
    D [12/Aug/2013:16:59:57 -0300] [Client 21] POST /printers/USB_Modem HTTP/1.1
    D [12/Aug/2013:16:59:57 -0300] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
    D [12/Aug/2013:16:59:57 -0300] [Client 21] No authentication data provided.
    D [12/Aug/2013:16:59:57 -0300] [Client 24] POST /printers/USB_Modem HTTP/1.1
    D [12/Aug/2013:16:59:57 -0300] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
    D [12/Aug/2013:16:59:57 -0300] [Client 24] No authentication data provided.
    D [12/Aug/2013:16:59:57 -0300] [Client 21] 2.0 Get-Job-Attributes 9
    D [12/Aug/2013:16:59:57 -0300] Get-Job-Attributes ipps://mini.local.:631/printers/USB_Modem
    D [12/Aug/2013:16:59:57 -0300] [Job 154] Loading attributes...
    D [12/Aug/2013:16:59:57 -0300] Returning IPP successful-ok for Get-Job-Attributes (ipps://mini.local.:631/printers/USB_Modem) from 192.168.1.20
    D [12/Aug/2013:16:59:57 -0300] [Client 24] 2.0 Get-Printer-Attributes 30
    D [12/Aug/2013:16:59:57 -0300] Get-Printer-Attributes ipp://localhost/printers/USB_Modem
    D [12/Aug/2013:16:59:57 -0300] Returning IPP successful-ok for Get-Printer-Attributes (ipp://localhost/printers/USB_Modem) from localhost
    D [12/Aug/2013:16:59:57 -0300] [Client 23] 2.0 Get-Printer-Attributes 31
    D [12/Aug/2013:16:59:57 -0300] Get-Printer-Attributes ipp://localhost:631/printers/USB_Modem
    D [12/Aug/2013:16:59:57 -0300] Returning IPP successful-ok for Get-Printer-Attributes (ipp://localhost:631/printers/USB_Modem) from localhost
    D [12/Aug/2013:16:59:57 -0300] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
    D [12/Aug/2013:16:59:57 -0300] [Client 22] 2.0 Get-Printer-Attributes 8
    D [12/Aug/2013:16:59:57 -0300] Get-Printer-Attributes ipps://mini.local.:631/printers/USB_Modem
    D [12/Aug/2013:16:59:57 -0300] Returning IPP successful-ok for Get-Printer-Attributes (ipps://mini.local.:631/printers/USB_Modem) from 192.168.1.20
    D [12/Aug/2013:16:59:57 -0300] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
    D [12/Aug/2013:16:59:57 -0300] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
    D [12/Aug/2013:16:59:57 -0300] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
    D [12/Aug/2013:16:59:57 -0300] [Client 24] POST /printers/Brother_MFC_8480DN HTTP/1.1
    D [12/Aug/2013:16:59:57 -0300] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
    D [12/Aug/2013:16:59:57 -0300] [Client 24] No authentication data provided.
    D [12/Aug/2013:16:59:57 -0300] [Client 21] POST /printers/USB_Modem HTTP/1.1
    D [12/Aug/2013:16:59:57 -0300] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
    D [12/Aug/2013:16:59:57 -0300] [Client 21] No authentication data provided.
    D [12/Aug/2013:16:59:57 -0300] [Client 24] 2.0 Get-Printer-Attributes 31
    D [12/Aug/2013:16:59:57 -0300] Get-Printer-Attributes ipp://localhost/printers/Brother_MFC_8480DN
    D [12/Aug/2013:16:59:57 -0300] Returning IPP successful-ok for Get-Printer-Attributes (ipp://localhost/printers/Brother_MFC_8480DN) from localhost
    D [12/Aug/2013:16:59:57 -0300] [Client 23] POST / HTTP/1.1
    D [12/Aug/2013:16:59:57 -0300] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
    D [12/Aug/2013:16:59:57 -0300] [Client 23] No authentication data provided.
    D [12/Aug/2013:16:59:57 -0300] [Client 21] 2.0 Get-Printer-Attributes 10
    D [12/Aug/2013:16:59:57 -0300] Get-Printer-Attributes ipps://mini.local.:631/printers/USB_Modem
    D [12/Aug/2013:16:59:57 -0300] Returning IPP successful-ok for Get-Printer-Attributes (ipps://mini.local.:631/printers/USB_Modem) from 192.168.1.20
    D [12/Aug/2013:16:59:57 -0300] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
    D [12/Aug/2013:16:59:57 -0300] [Client 22] POST /printers/USB_Modem HTTP/1.1
    D [12/Aug/2013:16:59:57 -0300] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
    D [12/Aug/2013:16:59:57 -0300] [Client 22] No authentication data provided.
    D [12/Aug/2013:16:59:57 -0300] [Client 24] POST /printers/Brother_MFC_8480DN HTTP/1.1
    D [12/Aug/2013:16:59:57 -0300] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
    D [12/Aug/2013:16:59:57 -0300] [Client 24] No authentication data provided.
    D [12/Aug/2013:16:59:57 -0300] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
    D [12/Aug/2013:16:59:57 -0300] [Client 22] 2.0 Get-Job-Attributes 11
    D [12/Aug/2013:16:59:57 -0300] Get-Job-Attributes ipps://mini.local.:631/printers/USB_Modem
    D [12/Aug/2013:16:59:57 -0300] Returning IPP successful-ok for Get-Job-Attributes (ipps://mini.local.:631/printers/USB_Modem) from 192.168.1.20
    D [12/Aug/2013:16:59:57 -0300] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
    D [12/Aug/2013:16:59:57 -0300] [Client 24] 2.0 Get-Printer-Attributes 32
    D [12/Aug/2013:16:59:57 -0300] Get-Printer-Attributes ipp://localhost/printers/Brother_MFC_8480DN
    D [12/Aug/2013:16:59:57 -0300] Returning IPP successful-ok for Get-Printer-Attributes (ipp://localhost/printers/Brother_MFC_8480DN) from localhost
    D [12/Aug/2013:16:59:57 -0300] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Active clients and dirty files"
    D [12/Aug/2013:16:59:57 -0300] [Client 23] 2.0 Get-Jobs 32
    D [12/Aug/2013:16:59:57 -0300] Get-Jobs ipp://localhost:631/printers/USB_Modem
    D [12/Aug/2013:16:59:57 -0300] Returning IPP successful-ok for Get-Jobs (ipp://localhost:631/printers/USB_Modem) from localhost
    D [12/Aug/2013:16:59:57 -0300] cupsdSetBusyState: newbusy="Dirty files", busy="Active clients and dirty files"
    D [12/Aug/2013:16:59:57 -0300] [Client 22] HTTP_WAITING Closing on EOF
    D [12/Aug/2013:16:59:57 -0300] [Client 22] Closing connection.
    D [12/Aug/2013:16:59:57 -0300] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
    D [12/Aug/2013:16:59:57 -0300] [Client 21] HTTP_WAITING Closing on EOF
    D [12/Aug/2013:16:59:57 -0300] [Client 21] Closing connection.
    D [12/Aug/2013:16:59:57 -0300] cupsdSetBusyState: newbusy="Dirty files", busy="Dirty files"
    D [12/Aug/2013:17:00:00 -0300] [Client 21] Accepted from localhost:631 (IPv6)
    D [12/Aug/2013:17:00:00 -0300] [Client 21] GET /admin/log/error_log? HTTP/1.1
    D [12/Aug/2013:17:00:00 -0300] cupsdSetBusyState: newbusy="Active clients and dirty files", busy="Dirty files"
    D [12/Aug/2013:17:00:00 -0300] [Client 21] Authorized as Xxx using Basic

    Now all are running 10.9.2. Same problem, except that two of the 10.9.2 clients have this problem. (They may both have had this problem with 10.9.1, but it wasn't noticed until now.)
    I have reset the printing system on the serving Mac, added the fax back in, and still have the problem.
    I also reset the printing system on one of the problem clients, tried a different user, and still have the problem.
    I also verified that the fax.ppd files are identical on working and non-working clients. They are.
    This is really, really frustrating.

  • Yours sincerely! I just bought a Sony DCR-SD1000 camera only when installing the cd drivers not supported by the operating system Machintosh. I've contacted the seller said the store did not provide for the apple os. How can I move all the files on the ca

    Yours sincerely! I just bought a Sony DCR-SD1000 camera only when installing the cd drivers not supported by the operating system Machintosh. I've contacted the seller said the store did not provide for the apple os. How can I move all the files on the camera the port out is to use a USB data cable to a laptop for my macbookpro can not read the contents of the file and the camera. I also want to use the lens on the camera as a substitute for the embedded camera on my macbookpro, what should I do to replace the embedded camera on macbookpro with sony camera so that the camera could be more variety and can I record when I turned macbookpro . Please help for this so that I can quickly capture the results from sony camera to my macbookpro. Thank you.

    See this page http://macosx.com/forums/networking-compatibility/296947-sony-camcorder-my-mac.h tml - might be some helpful tips there.
    Clinton

  • How to get rid this Warning=Sales order (SOBKZ = ) is not provided for this

    Dear Concerns
    In MB1C, Mov Type=521E, and the batch no=A.
    After entering all the required entries the systen gives me the warning and the system  save the transaction after pushing the enter button five to six times.
    Sales order (SOBKZ = ) is not provided for this goods movement.
    I want to get rid of this warning .
    So that the system could save the transaction in one click.
    Regards:Vijay

    Hi
    Can u please tell me the solution of that issue as in my case the item has to be received
    and reserved against the sales order.
    can i make my sales order item cate mark with the special stock indicator and
    does it help to solve my problem
    Yes this will only solve the problem. You need to mark your sales order item cate with special stock indicator E
    Then PGI will be smooth otherwise you can expect problem
    This reply is for the other friend
    In-IMGMaterials ManagementInventory Management and Physical Inventory---Define Attributes of System MessagesSettings for System Messages----
    Here in the new entries add message M7---374 with version as 00 and make that as error message and save it
    Regards
    Raja

  • Aspire V3-571 not providing connected signal to monitor in power save

    I recently reconfigured a number of my systems, and ended up with an Acer monitor on my Acer Aspire - the monitor had previously been used with a Dell laptop. You would think two Acer products would work better together, but it's actually slightly worse. When an external monitor is used with VGA, there are three states: the computer is driving video down the wire, the cable is connected but the computer is not sending video, and cable disconnected. The monitor can recognize these states and behave accordingly. The middle state, when the computer is either in power save mode or turned off, is the problem. In such a case, the monitor should simply blank the screen and go into its own power save mode - which it did with my Dell. With the Aspire, the monitor goes into disconnected cable mode (where it displays a moving error message forever) as soon as power save kicks in and the laptop stops sending video. This is no big deal when the laptop is off, since I can just turn off the monitor and save some electricity. But it's really annoying when the computer is on. This is especially true since this same monitor worked perfectly well with the Dell laptop. So the Acer machine is not providing a "proper" signal for some reason. My question is - does anyone know of some configuration option on the Aspire that will cause it to send a signal that the monitor will recognize as power save when the laptop is in that state - or off? Thanks.  

    Thanks for the reply. Good suggestion about checking for new drivers - always useful. Alas, there were none, but it did give me a chance to revisit the VESA DPMS spec that governs such things. Described well here:https://en.wikipedia.org/wiki/VESA_Display_Power_Management_Signaling I had forgotten that there were two intermediate levels (HSYNC on VSYNC off and the opposite). Obviously On and Off are seen by the monitor, with the latter interpreted as cable disconnect. I just don't seem to get one of the other states from the Aspire like I did from the Dell. The Intel HD4000 chipset in the Aspire claims to support DPMS, it just isn't working the way it worked with the Dell. That machine uses an older Intel graphics chipset. Once I had an oscilloscope in my garage and I could have looked at the pins to see what is being sent to the connector. No longer. I guess I just live with this unless a new driver shows up, or someone comes up with another solution.

  • My mac desktop will not provide sound from internal speakers.  when I go to audio devices window it only shows airplay.  How can I get internal speakers back.

    My mac desktop will not provide sound from internal speakers.  When I go to audio devices window it only shows airplay.  How can I get internal speakers back.

    There are many possible causes for this issue. Take each of the following steps that you haven't already tried. Some may not apply to your model. Back up all data before making any changes.
    1. Start with the steps recommended in this support article. Don't skip any of the steps. It's the starting point for further efforts to solve the problem.
    2. Run Software Update and make sure you have a fully up-to-date installation of OS X.
    3. If you've installed an application called "Memory Clean" or any other third-party software that is supposed to "clean" or "purge" memory automatically, remove it according to the developer's instructions and restart. You should do that even if the software is not causing the problem, because it's useless.
    4. Other third-party software that has been reported to interfere with sound output includes "Boom" and "Samsung Kies." If applicable, uninstall according to the developer's instructions (not by dragging something to the Trash.)
    5. If an AirPlay device is selected for sound output from iTunes (or from other applications via third-party software such as "Airfoil"), deselect it.
    6. Launch the application "Audio MIDI Setup" by entering the first few letters of its name in a Spotlight search and selecting it in the results (it should be at the top.) Select Built-in Output from the list on the left. If the Mute boxes are checked, uncheck them.
    7. If a red light is visible in the audio-out port when sound should be playing, the internal switch is stuck in the position for digital output. You may be able to free it by inserting and removing a mini-stereo jack of the proper size. Inserting any kind of tool in the port may cause damage that won't be covered by your warranty.
    If there's no red light, the switch may still be stuck in the headphone position. Try to free it the same way.
    8. Disconnect all wired peripherals except keyboard and mouse, if applicable. If more than one display is connected, disconnect all extra ones. Restart and test.
    9. If you have a MacBook Air, turn off Bluetooth and restart.
    10. Start up in safe mode. Don't log in; just restart as usual when the login screen appears. When you do, make sure the words "Safe Boot" do not appear in the login screen. If they do, the system is still in safe mode and sound won't work.
    11. Reset the NVRAM.
    12. Reset the SMC.
    13. Triple-click anywhere in the line below on this page to select it:
    /Library/Preferences/Audio
    Right-click or control-click the highlighted line and select
              Services ▹ Reveal in Finder (or just Reveal)
    from the contextual menu.* A folder should open with an item selected. Move the selected item to the Trash. You may be prompted for your administrator login password. Restart the computer and empty the Trash. Recreate your settings in the Sound preference pane.
    *If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination  command-C. In the Finder, select
              Go ▹ Go to Folder...
    from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
    14. Reinstall OS X after backing up all data.
    15. Make a "Genius" appointment at an Apple Store.

  • Process Order API -Reason for change either not provided ...

    I'm calling Process Order API to update shipped_quantity for a RMA receipt. Nothing has changed about this code but now I am getting :
    "The reason for this change is either not provided or invalid. (OBJECT=ORDER) "
    We installed a patch last weekend to speed up Ship Confirms I wonder if we went backwards in OM. Any suggestions ???
    Process Order code snipet:
    l_header_rec.header_id := p_header_id;
    l_header_rec.operation := oe_globals.g_opr_update;
    l_line_tbl(1) := OE_ORDER_PUB.G_MISS_LINE_REC;
    l_line_tbl(1).line_id := p_line_id;
    l_line_tbl(1).shipped_quantity := p_rec_qty;
    l_line_tbl(1).shipping_quantity_uom := 'EA';
    l_line_tbl(1).flow_status_code := 'RETURNED';
    l_line_tbl(1).operation := oe_globals.g_opr_update;
    Call Process_Order
    OE_Order_pub.Process_Order(
    p_api_version_number => 1
    .

    Please review the documentation about process order API as there are several things you might want to revisit about this call to process order:
    Following are my observations:
    - you are updating shipped quantity. I think this field shoud not be updated using the API. As it shoudl be updated by a process(shipping process)
    -You are also trying to update the flow_status_code. This field is also not supposed to be updated.
    My suggestion is that you try to follow the same process step by step that one should follow to update the shipped_quantity on RMA order. (e.g. receiving the item against the order using inventory api's or probably shipping the order line using the shipping api's). I am afraid, using the given code you might create data discrepancy.
    Hope this helps,
    Nitin Darji

  • G60-230US Laptop - HDMI cable does not provide sound output only video

    HDMI cable does not provide sound output only video. I have the following device adapter - Mobile Intel(R) 4 Series Express Chip Set Family, and two sound, video, game controllers - Coexant High Definition  Smartadudio 221 and Intel (R) HIgh Definition Audio HDMI.  I do not see any option but "Speakers" on the Sound "playback" tab.  Not sure what to do to fix

    With the cable connected to source, click to select/highlight the Intel HDMI. next click the 'Set default' button.
    ******Clicking the Thumbs-Up button is a way to say -Thanks!.******
    **Click Accept as Solution on a Reply that solves your issue to help others**

  • MD50 , getting exception "Coverage not provided by Master Plan"

    Dear Sir,
    We have mate-to-order scenario and MRP run was made using MD50 against a Sale-Order .
    After the MRP run , we are getting an exception in MD04 for a Material which is a Bought-out Material . The exception is "Coverage not provided by Master Plan" .
    The detail about the Material  (X) having exception is as below :
    The requirement for the Material X as per BOM is 15 nos . We have 10 numbers quantity for Material X available in own Stock . The Material X has Individual/Collective Indicator set as 2 in MRP view .
    After the MRP run under MD04 , for Material X following information appear :
    Date            MRP Element    MRP Element Data     Rec./Reqd Qty       Available Qty
    20.06.2008   Stock                                                                             10
    24.06.2008   DepReq            1300-100                    15-                        5-
    As a logical  for the balance 5 qty , Planned Order of 5 nos qty must be generated . But no Planned Order has been generated . In MD04 view , the Item has exception "Coverage not provided by Master Plan" .
    We request , to kindly guide us as what is the reason for the mentioned exception and how to resolve it . Why it has not generated Planned Order for 5 nos qty .
    Regards
    B Mittal

    can you please speicify the what is the MRP type used for materials X, the material for which requirement is not generated in the planning run?

  • Verizon is charging my account for a service that was not provided.

    Verizon is charging my account for a service that was not provided.
    I am a LONG term Verizon customer and no one is helping.....
    I work in IT, with the Network and Mobility groups, so I know what I am talking about, network access, O/S, bandwidth, etc….
    I changed to a droid Bionic, from my LG (broken).   I started experiencing issues with inability to connect to a solid 4G network. The phone was not updated to Ice Cream Sandwich O/S and tried repeatedly to get update, but no go. Verizon did swap out with another bionic, but still experienced issues with inability to consistently get network access.  I work in a big city, no one else was having issues at my work.
    Husband left for Europe due to a family emergency mid Sept.   FIL was in hospital.  I work and there is a 7 hour time difference.   We both had SKYPE on our phones.  At work, I tried to contact him, using SKYPE.   SKYPE would not connect, due to the phone issue connecting to the network.   I had to call husband directly (international calls) to get updates on the condition of my ill, 96 yo FIL.  
    1.   This was not an issue of an app that did not function and that Verizon does not support.   I did not have access to the network, thus could not use SKYPE to make calls.  This was not a choice to call international.  
    Verizon admitted that it was a phone issue.  Since I am a long term Verizon customer and have insurance on the phone, they tried to give me yet another Bionic 9that would not work).  After much discussion, they sent me a RAZR that was on the updated O/S.
    Up to the 29th of Sept, I was on the Bionic and could not access SKYPE.  Once I transferred over, I could use SKYPE and was not forced by Verizon to make international calls due the lack of network service that I pay for EACH MONTH.
    When I received my bill for Sept, there were hundreds of dollars of additional charges.  
    This was due to the international calling that I was forced to use to check on status of terminally ill 96 yo FIL.
    This was due to the overage of minutes that I had and was never notified of by Verizon, due to the interational calls.
    I have tried to deal with Verizon on eliminating the charges. This is after having to deal with the death and funeral arrangements, service, etc of FIL.  Verizon claims that I made the calls, thus I must pay.   They admitted to it being a Verizon network issue when they traded for the Razr and updated O/S, but still want me to pay hundreds of dollars in extra fees that THEY CAUSED.

    szilasi wrote:
    Just as a FYI..  Husband was at the hospital, not at a PC. It would be so sanitary and easy if all was scheduled properly, but guess what?  Usually when someone is ill enough and has been rushed to the hospital and extended stay, you do not only contact at 6 AM in the morning.   You check on statuses, talk to doctors, etc. during the day. 
    I thought you said YOUR phone was the one having the problem, not his. You could have Skyped/emailed from a computer TO his phone, but you chose to call instead.
    Yes, you are correct, everyone does not always think clearly when in a stressful situation such as that. Does not mean someone else should pay for YOUR actions.
    Another thing I notice about your prior post is you say "Verizon claims that I made the calls, thus I must pay." but you also claim to have made the calls yourself, so it isn't necessarily that Verizon "claims" you made the calls, you DID make the calls.
    Finally, I have found myself in a similar situation in the past and most likely in the near future. I also didn't(and don't) expect Verizon to pay for my phone usage during those times.

  • OnPlus not providing new Contract/Warranty status updates

    The Cisco Contract/Warranty notification function in OnPlus is currently not providing new updates.
    The Product Contract/Warranty function of OnPlus displays product up-to-date information regarding the Contract status and Warranty for supported Cisco devices. This function is currently not providing new updates to those devices in OnPlus and the OnPlus engineering team is working on a resolution to the problem.
    Status updates for other product lifecycle information about Cisco devices, such as, Software and Hardware End-of-Life, Product Security Alerts, and Field Notices are available in OnPlus.
    As additional information is known for the time to resolution, we will post more details.
    Thanks,
    The OnPlus team

    We have resolved this issue and OnPlus is now providing complete lifecycle  information for new devices scanned or discovered through ON100.
    We applogize for any inconvenience.
    Thank you,
    OnPlus Team

  • Coverage not provided by master plan

    Hello all,
    When I run MD02, planned orders are generated but no purchase requisition is generated. The error is : "Coverage not provided by master plan".
    What can I do to sort out this error?
    Thanks in advance.

    Dear,
    Please go through the links which will give idea about your issue.
    Where as Coverage not provided by master plant is an exception message which details situation as : "Coverage not provided by master plan Excess stock planned based on the "Range of Coverage" profile. Coverage profiles should not be in use. Remove the "Range Of Coverage Profile" from the MRP view of the Material Master and run MRP manually. Contact the HelpDesk for assistance if unable to resolve error".
    http://www.sap-img.com/production/mrp-not-creating-purchase-requisition.htm
    http://help.sap.com/saphelp_45b/helpdata/en/f4/7d32bb44af11d182b40000e829fbfe/frameset.htm
    Regards,
    Syed Hussain.

  • Why Apple does not provide for call block / blacklist function on iphone?

    If Apple frowns upon jailbreaking the iPhone, why not AT THE LEAST endorse and make available third-party application that can provide a decent call block / blacklist function (like the Call Blocker for BlackBerry)?
    Can an Apple representative provide feedback pls?
    [Most telcos do not provide call-screening as a value-add service. Even if they do, a more cost-effective method is still the better option.]

    Have you asked your service provider if they offer any call blocking service? I know here in the USA, AT&T does, although they do charge $4.99/month for the service (it is part of a parental control package that allows control of both numbers that can be blocked from calling you, and numbers that your iPhone can call to).
    On-phone black list apps typically work by using caller id info and looking it up against the apps own database of numbers you've entered. So your phone still rings at least once, as the phone needs to allow a brief connection for the app to get the caller id info before disconnecting a number flagged for blocking. There really is no way to truly block calls from the phone itself, you need your service provider to be on board with the idea, so they can dis-allow the call at the switch and truly block it from ever reaching your phone.

  • Structure maintenance not provided for Extraction structure MC02M_SCN

    Hi BW Experts,
        I am getting an error "Structure maintenance not provided for Extraction structure MC02M_SCN" while maintaining 2LIS_02_SCN datasource.I activated the datasource in RSA5 also.But i couldnt able to maintin this datasource.Can you please help me on this.
    Thanks in advance.
    Thanks,
    Ram.

    Hi,
    In LBWE for some of the DS Structure is not provided by the SAP.
    So For the mentioned DS "CGR" you can't see the structure from LBWE .
    Enhancement will be done based on extractstructure.
    Two ways 1. Through RSA6
                       2. TAKE THE EXTRACT STRUCTURE NAME OF " CGR" DS from RSA6 and append the fields in SE11.
                       3. Append the fields to the DS Extract strcuture " MC02M_0CGR" in se11
    Regards
    Ram.
    Edited by: Ramakanth Deepak Gandepalli on Dec 30, 2009 5:28 AM

Maybe you are looking for

  • My Macbook Pro is running slow all of a sudden

    I woke up my computer from sleep mode about an hour ago, and the fan automatically came on pretty loudly. I noticed my computer was very slow - if I clicked on something, there would be a long delay, etc. I tried restarting but no change. I checked t

  • 4th Gen Ipod Nano compatibility issues`

    I purchased a 4th Gen 16gb ipod nano. When I connected it to my car's Sony car stereo I got the "can't charge" error message that has been discussed previously on these pages. It will also not work on my wife's Chrysler Town & Country. Several soluti

  • X-refs are not working in the PDF output

    I correctly generated a PDF from a ditamap using DITA-FMx and cross-references are not working. Thanks for your help.

  • How do I install Adobe Air SDK for CS5.5 Products?

    Hey how would I install Adobe Air SDK 3.7 for Flash Pro CS5.5 and Flash Builder 4.6?

  • 12.1.3 Check Printing

    Hi, All, We are about to upgrade to 12.1.3 and need to configure/setup check format from Payables. I downloaded BIPuplisher_11.1.1.5_Desktop, but when I try to logon, it asks me for the report server URL. Does it mean that I need to install BI publis