Parameterized mapping in PI 7.31 Dual Stack

Hi All,
I am working on PI 7.31 Dual Stack. I am getting the below exception in parameterized mapping:
com.sap.aii.utilxi.misc.api.BaseRuntimeException; com.sap.aii.mapping.api.UndefinedParameterException: The input-parameter TestVal does not exist.
I could test in MM test tab but facing the issue in runtime. Please suggest me where I am going wrong.
Thanks,
Madhurima

Hi Madhurima,
Have you checked if your PI version and patch level is being affected with this note 1933139 - Errors during execution of operation mapping with message mapping parameters names different from the operation mapping parameter names?
Regards.

Similar Messages

Mapping error in PI 7.4 dual stack

Dear Experts,
Recently we upgraded our system from PI 7.1 to PI 7.4 dual stack.
Scenerio is ECC->PI->SOAP(Webservice) synchronous
Issue in detail:
We are creating a invoice in ECC system through PI its updating in third party site using SOAP webservice and will get a reference number from that site and then updating in ECC as in synchronous way.
Invoice data's are reached PI sucessfully from ECC but it not updating in the site and getting below mapping error after upgarded to PI 7.4.
Your points will be highly appreciable.
Kindly help to sort out this issue.
Best Regards,
Monikandan

Hi Monikandan,
It seems you are trying the sign the payload in your java mapping. So, looking at the attached error, there could be 2 possibilities:
1) Either there is no certificate with alias: *_PRD
2) This certificate is stored in some "System" type keystore view which is not accessible from you mapping code. Try to move your certificate to some "User" keystore view.
Thanks & regards,
Piyush

PI system upgrade from 7.1 to 7.4 dual stack

Hi,
We want to upgrade PI system to 7.4 .currently we are using PI 7.1 system (dual stack)and want to go for 7.4 dual stack.
which one single stack or dual stack is the best approach and what are the impacts normally see when upgrading to newer version.
We are planning to install 7.4 freshly recomonded by SAP .
We need to migrate objects from older system to newer system?
I want to know the process from basis perspective also .
Import/export or migrate is the best way to move objects from older sytem to newer system.
Please suggest me any links about the process including basis point of view also suggestions for the approach.
thanks,
aman

>>>> which one single stack or dual stack is the best approach and what are the impacts normally see when upgrading to newer version.
I would prefer single stack considering the SAP's future road map but of course it depends on how much effort your company is ready to spend. Incase you have lot of CCBPM's then you'll have to redesign them using Netweaver BPM if you go with single stack.
As are going with fresh installation(migration) of dual stack then you don't need to invest much.
>>> We are planning to install 7.4 freshly recomonded by SAP .
We need to migrate objects from older system to newer system?
I want to know the process from basis perspective also .
There is wizard using which you can move the directory objects ( classical scenario's to Integrated configurations). Please use it for ID objects
Refer to the below blog for more details. (ignore blog's title. it's applicable for dual stack-> dual stack too)
Moving Integration Directory Artifacts from dual stack to single stack
For ESR you can simply export and import the tpz file.
>>> I want to know the process from basis perspective also .
They can simply follow the installation guide and execute the post installation steps properly.

PI 7.30 dual stack - different time in rwb, pimon and ABAP stack

Hi @all,
I am working with the client on a PI 7.30 dual stack system.
During monitoring of message processing I saw that there are differences in the time displayed while monitoring the processing of identical messages
e.g. channelmonitor (mdt/channelmonitorservlet and rwb) is 1 hour behind pimon
The time displayed in the ABAP Stack (Menu System - Status) differs also 2 hours ahead of pimon.
Are there java parameters to configure the used time zone and which could be reason for this behaviour.
For me it seems strange that there is a difference between to tools (channelmonitor and pimon) I was supposing are based on the same technical stack
Would be nice to have the same time throughout the whole system.
Any help appreciated.
Best regards
Jochen

Hi Jochen,
I did not found the option to change the time zone for pimon. Please refer the below wiki it might helpful
PiMon_TroubleshootingGuide - Technical Operations - SCN Wiki
PiMon_Frequently Asked Questions - Technical Operations - SCN Wiki
regards.
Harish

Java Stack Vs Dual Stack in Pi 7.3

Hi experts.
I open this thread because I'd like to know your opinion about the newJava installation option in SAP PI 7.3. In previous realeses (7.0,7.1) I felt more comfortable and safe in abap stack and I'm a little afraid about working only with java stack.
I'd like to know advantages and disadvantages to choose java stack instead of dual stack, why you'd choose one of two options or both in your nexts customers.
Thank u so much and happy new year!!!!

Java Stack or Dual Stack in 7.3
Java Stack alone: Almost all standard adapters including HTTP, IDOC and Proxy are all available in this stack. you need to use Integrated Configuration object for this. You are basically going to use Advance Adapter engine alone for the entire processing.
Pros:
No persistance steps here. So you would improve performance many folds for sure.
Throughput is also improved very much.
since 7.3, Solution Manager is available for monitoring inaddition to RWB and NWA. So monitoring would not be issue.
If you are looking for real performance improvement, Single stack Java to go.
Cons:
Abap mapping is not supported.
Message split to multiple receivers are not completely supported.
BPM interfaces are not seamless migration here. SAP 7.1 and lower versions support BPEL wheras 7.3 supports BPMN standards. So you might have to tweak a bit to modify existing interfaces here
Dual Stack:
Your option is pretty open. If you need some specific interfaces to handle only java stack, still that is possible and increase the performance. Also if you have lot of existing interfaces that requires BPM interfaces, ABAP mapping , Multiple split /branching etc.
still dual stack is the better option now. Here developer decides according to the requirement.
Still safe mode is going for Dual Stack for now and change in the future to single java stack alone.

Rebuild our XI application server from Single stack to dual stack

Hello,
We currently have an XI landscape with two application servers, the CI is of course a dual stack system, however the two app servers are single stacked, however we would like to make the two app servers into DUAL STACKs, my first guess was to rebuild the two apps from scratch and reinstall them as a dual stack apps. My Q is:
First: Do we need to rebuild both app servers, or can we make a change to the app servers to modify them to become dual stacked
Second: If we do need to rebuild both these apps, is there a specific document available to do this on Market place for installing a Dual stack app servers with PI?
Thanks in advance.
Sam
<Moved from SAP PI Forum>
Edited by: Prateek Raj Srivastava on May 13, 2010 12:27 PM

Hello,
Thank you all for your feedback,
Denny Liao, it is very interesting question you implied, we do have a J2EE directory created under the /usr/sap/SID/D30 directory:
/usr/sap/XQ9/D30
mqaapz28:xq9adm 13% ls -ltr
total 36
drwxr-xr-x   7 xq9adm   sapsys        96 Aug 24 2009 igs
drwxr-xr-x   9 xq9adm   sapsys      1024 Aug 24 2009 j2ee
drwxr-xr-x   2 xq9adm   sapsys      1024 Nov 11 2009 sec
drwxr-xr-x   3 xq9adm   sapsys      1024 Nov 24 10:48 log
obviously this app server does not have any (jlaunch/jcontrol process running) therefore it is not running as dual stacked. but interestingly enough I do see logs in the
/usr/sap/XQ9/D30/j2ee/cluster/server0/log directory created at the time of the initial install. and under:
/usr/sap/XQ9/D30/j2ee/cluster
mqaapz28:xq9adm 29% ls -ltr
total 30
drwxr-xr-x   2 xq9adm   sapsys      1024 Aug 24 2009 bootstrap
-rw-rr   1 xq9adm   sapsys        39 Aug 24 2009 version.bin
-rw-rr   1 xq9adm   sapsys      6339 Aug 24 2009 instance.properties.vmprop
-rw-rr   1 xq9adm   sapsys      3676 Aug 26 2009 instance.properties
drwxr-xr-x   7 xq9adm   sapsys      1024 Aug 26 2009 dispatcher
drwxr-xr-x 11 xq9adm   sapsys      1024 Aug 26 2009 server0
as per the note you mentioned above (741289 ) this explains how to recover a lost J2EE parameter setup, I am guessing this can be simply followed and re-enable the app server to run as a dual stack.
also my system information for the J2EE on the CI is:
System XQ9
Find other systems in SLD... Message Server
Host: mcsapxq9j
Port: 3924
Enqueue Server
Host: mcsapxq9j
Port: 3224
Database
Name: XQ9
Host: mcsapxq9dbx
Type: Oracle (Oracle Database 10g Enterprise Edition Release 10.2.0.2.0 - 64bit Production With the Partitioning and Data Mining options)
Software Components all components...
Name Version Applied
sap.com/SAP-JEECOR 7.00 SP21 (1000.7.00.21.0.20091214121410) 20100506125119
sap.com/SAP-JEE 7.00 SP21 (1000.7.00.21.0.20091214121301) 20100506124943
Licenses
Installation Number *** not yet assigned ***
System Number *** not yet assigned ***
Software Product Days Until Expiry
Download system configuration
Instance mqacsz27_XQ9_30 All processes running
Host: mqacsz27
OS: SunOS (sparcv9) 5.10
dispatcher Running
VM system properties...
PID: 21384
Name: Java HotSpot(TM) 64-Bit Server VM
Vendor: Sun Microsystems Inc.
Version: 1.4.2_21-b03
VM Parameters
Cluster
Node ID: 301932700
Kernel Version: 7.00 PatchLevel 76340.450
HTTP Port: 53000
HTTPS Port: 53001
P4 Port: 53004
Telnet Port: 53008
Info for crashes of this node
server0 Running
VM system properties...
PID: 21394
Name: Java HotSpot(TM) 64-Bit Server VM
Vendor: Sun Microsystems Inc.
Version: 1.4.2_21-b03
VM Parameters
Cluster
Node ID: 301932750
Kernel Version: 7.00 PatchLevel 76340.450
Info for crashes of this node
SDM Running
VM
PID: 21400
SDM Port: 53018
So: besides setting up the parameters in the above Note and consider the Load balancing, as there any other major setups required to start this app server as a dual stacked instance?
Thanks in advance.
SAM
Edited by: SAM_ONE on May 14, 2010 3:45 AM
Edited by: SAM_ONE on May 14, 2010 3:55 AM

Single stack vs. Dual Stack - Why does SAP recommend single stack?

Hello SAP,
I am a business partner who specializes in infrastructure consulting for SAP solutions. The SAP Consultants I am working with recently have been recommending that customers install single stack systems. I would like to know why? Are there problems with dual stack systems? Is SAP changing things in a later release and they want customers to be prepared for the change?
From an infrastucture point of view this recommendation combined with SAP NetWeaver architecture will result in an explosion of SID names which leads to an explosion of application server instances and DBMS instances and an explosion of installed servers. I know it is possible to combine SIDs into a single DBMS using MCOD and to have multiple application servers in a single physical server, but there are issues with mulitple application server instances and MCOD use which make normal maintenance operations difficult.
I think it would be much better for customers to install dual stack systems and simply adjust the SAP profile parameters to disable one stack or the other. This way, you could still have 1 stack per application server instance and you would not be have to be creative with SAP SID names!!! Creating a DBMS instance or installing an additional server is not a simple nor economical proposition.
Regards,
Zaz

I am a business partner who specializes in infrastructure consulting for SAP solutions. The SAP Consultants I am working with recently have been recommending that customers install single stack systems. I would like to know why? Are there problems with dual stack systems?
The problems are:
- difficult to size and maintain - Java + ABAP will fight for resources (memory,CPU) and there´s not much one can do to tune if either ABAP or Java as dual stack instance on a single box is running nuts (for whatever reason).
- System copies via R3load - if you want to copy a huge system (let´s say ERP 6.0 + Java stack) you need to use sapinst + R3load to do the copy. Imagine if the system is 1 TB or bigger, this is very time consuming
- Upgrades are complicated - if you upgrade a dual stack system you need to run two PREPARES and two upgrades at the same time - there are sync points each upgrade wait for the other to finish --> difficult to plan in sense of runtimes and even more notes/preparation to do (a dual stack SolMan upgrade from 3.2 to 4.0 had almost 100 notes (technical!) and two upgrade preparation guides...)
- interdependencies - example: you run ERP + EP + BI-Java on one system. You upgrade your BI (which is on a different box) to a new support package. Since the BI-Java need to be in sync with the BI ABAP support package you need to upgrade the EP too - and since there´s a direct dependency (doublestack system) you will need to install support packages on your ERP. So you finally end up in having dependency chains that a total different system (BI) will force you to upgrade/patch your ERP. And if you have e. g. a CRM connected to the same EP you will need to patch that too...
Is SAP changing things in a later release and they want customers to be prepared for the change?
No - the possibility of having a dual stack installation will be still there.
From an infrastucture point of view this recommendation combined with SAP NetWeaver architecture will result in an explosion of SID names which leads to an explosion of application server instances and DBMS instances and an explosion of installed servers. I know it is possible to combine SIDs into a single DBMS using MCOD and to have multiple application servers in a single physical server, but there are issues with mulitple application server instances and MCOD use which make normal maintenance operations difficult.
I agree - MCOD is not a good solution for this problem.
I think it would be much better for customers to install dual stack systems and simply adjust the SAP profile parameters to disable one stack or the other. This way, you could still have 1 stack per application server instance and you would not be have to be creative with SAP SID names!!! Creating a DBMS instance or installing an additional server is not a simple nor economical proposition.
There are 36 * 36 * 36 (minus a few reserved) names for SIDs- this should be enough - also for the biggest customers
Of course one could install both and disable the one you don´t need - but this won´t help in dependency thing. If you e. g. install a dual stack instance for CRM and disable the Java part, you can nicely run it. In case of an upgrade, you will need to upgrade the Java part too (see above) although you don´t use it. The upgrade will detect the doublestack and wait for the java instance to be upgraded too. Same is true vice versa. And believe me: you don´t want that
In fact it is better to separate - that´s at least our experience. The main no-go for such a configuration on our side was the dependency thing. Since they are there and you can´t do much about them we decided to have a 1:1 relationship for ABAP backend and Java "frontend". You will get more instances (and names and databases) but you can patch applications independently from each other. So an implementation of a BI patch won´t imply that you finally also patch your ERP production and other systems that connect to that portal.
There are virtualization techniques available to not need more boxes, you can consolidate them on one machine as if you were installing a dual stack so that is not really an issue. This depends, of course, on the platform and database you use (e. g. Oracle does not support production installations in VMWare). We use for our Java instances Solaris on Opteron (or Intel 64bit) and zones/containers and for the ABAP part we use Linux + Xen. Both virtualization methods come with the OS (so no additional $$$) and both are supported by SAP.
The propagated advantage of having a dual stack installation (shared memory access etc.) is so small that it doesn´t outban the additional complexity - which is definitely there.
I hope those arguments will help to understand SAPs (and the consultants) position - get back if you want more
Markus

Removing J2EE stack from dual-stack installation

Hello.
Does anyone know if it's possible to remove the JAVA-stack from a ERP6.0 dual-stack installation ?
We have a ERP 6.0 system running HCM services. The ERP system is installed as dual-stack, but the JAVA-stack is not in use as we also installed a separate NW 7.0 JAVA system hosting portal and java hcm services.
Thank you.
Gerhard.

Hi,
Yes, you can drop Java part from existing dual stack system.
1) Stop cenrtal service instance and all dialog instances of your system.
2) Also, stop J2ee engine of CI from SMICM.
3) Hash out all Java parameters in your default and instance profile (like j2ee, exe/j2ee, exe/jlaunch, jstartup etc.)
4) Delete central service instance.
5) Delete Database schema
6) Delete directories (/usr/sap/<SAPSID>/DVEBMGS<xx>/SDM and /usr/sap/<SAPSID>/DVEBMGS<xx>/j2ee)
Thanks
Sunny

SPNEGO on dual stack

Dear Experts,
I want to implement the SSO at clients place and I have gone throught the note
Note 994791 - SPNego Wizard.pdfu200E and in that they have the following attachment
File Type File Name Language Size
ZIP File Type File Name Language Size
ZIP SPNego_DB_datasource_Sun_JDK_1.zip E 2.008 KB
ZIP SPNego_DB_datasource_Sun_JDK_2.zip E 1.538 KB
ZIP SPNego_ADS_datasource_Sun_JDK_1.zip E 1.049 KB
ZIP SPNego_ADS_datasource_Sun_JDK_2.zip E 1.470 KB_datasource_Sun_JDK_1.zip E 2.008 KB
ZIP SPNego_DB_datasource_Sun_JDK_2.zip E 1.538 KB
ZIP SPNego_ADS_datasource_Sun_JDK_1.zip E 1.049 KB
ZIP SPNego_ADS_datasource_Sun_JDK_2.zip E 1.470 KB
I have Solaris 10 and with ECC6 and EP7 SP 9 on the same box and needs to configure SPNego on it( Dual stack)
With the above .zip file, which will be for my requirement?
What does the SPNego_DB, SPNego_DB

Following is the setspn command details and I am stuck with the LDAP user path and groups through Portal--> System Admin
local J2ee-
@(AT)
C:\Documents and Settings\tsadmin3>ldifde -r (samaccountname=J2ee-dev) -f out.ld
f
Connecting to "abcbhdc01.bah.ARAB.LOCAL"
Logging in as current user using SSPI
Exporting directory to file out.ldf
Searching for entries...
Writing out entries.
1 entries exported
The command has completed successfully
dn: CN=J2ee-dev,OU=IT Application Services(763),OU=Global Information Technology (760),DC=bah,DC=ARAB,DC=LOCAL
changetype: add
objectClass: top
objectClass: person
objectClass: organizationalPerson
objectClass: user
cn: J2ee-dev
description: Sab sign on user
givenName: J2ee-dev
distinguishedName:
CN=J2ee-dev,OU=IT Application Services(763),OU=Global Information Technology (
760),DC=bah,DC=ARAB,DC=LOCAL
instanceType: 4
whenCreated: 20090209075309.0Z
whenChanged: 20090211090157.0Z
displayName: J2ee-dev
uSNCreated: 46498115
uSNChanged: 47113114
name: J2ee-dev
objectGUID:: 6AF2hwAcCE60Gb5HcDD0jA==
userAccountControl: 2163200
codePage: 0
countryCode: 0
scriptPath: duser1.bat
pwdLastSet: 128786537344568663
primaryGroupID: 513
objectSid:: AQUAAAAAAAUVAAAADi/cefk/OnBiRqljSjAAAA==
accountExpires: 9223372036854775807
sAMAccountName: J2ee-dev
sAMAccountType: 805306368
userPrincipalName: J2ee-dev AT bah.ARAB.LOCAL
servicePrincipalName: HTTP/ABCBHDC01.bah.ARAB.local
objectCategory: CN=Person,CN=Schema,CN=Configuration,DC=ARAB,DC=LOCAL
Can I get what information to update in user path and group path.
As far as Configtool is concerned I am not able to enter any details in UME LDAP data.
Also what other settings required?
in spnego I am getting
Search by service user mapping attribute krb5principalname=J2ee-devATBAH.ARAB.LOCAL failed; check the mapping attribute and the UME configuration
In configtool, I have set the self.addattrs to krb5principalname
Rest what needs to be done?
Please guide..

Dual stack multi-home BGP

I have a design I'm working on which will require among other things dual stack across MPLS. Configuring CE routers for dual stack seems very straight forward, however I'm having trouble finding documentation describing the BGP config for multihoming and load sharing with 2 routers and 2 service providers. I've configured this quite a few times with HSRP and BGP for IPv4 similar to this example:
http://www.cisco.com/en/US/tech/tk365/technologies_configuration_example09186a00800945bf.shtml#conf5
Am I looking at this wrong or are these scenarios just not widely published yet?
Any help is greatly appreciated!
thanks,
Josh

Hi Josh,
You will have to understand the MBGP address families. One of the basic rule of MBGP is that when I'm advertising a route from a specific address family, the next hop has to be from the same address family. So, you will have to make sure the next hop is from the same address family. Couple of examples for you:
1. IPv6 NLRI in IPv4
router bgp 201
bgp router-id 192.168.30.1
neighbor 150.1.1.2 remote-as 301
address-family ipv6
neighbor 150.1.1.2 activate
neighbor 150.1.1.2 route-map SETNH out
network 2192:10::/48
route-map SETNH permit 10
set ipv6 next-hop 2150:1:1::3
2. IPv4 NLRI in IPv6
router bgp 201
bgp router-id 192.168.30.1
neighbor 2150:1:1::2 remote-as 301
address-family ipv4
neighbor 2150:1:1::2 activate
neighbor 2150:1:1::2 route-map SETNH out
network 192.10.0.0
route-map SETNH permit 10
set ip next-hop 150.1.1.3
I also came across this document which should help you: http://fengnet.com/book/Cisco.IOS.Cookbook.2nd/I_0596527225_CHP_25_SECT_11.html
Regards,
Salman

Doubt on single stack or Dual Stack

Hello,
After logon to SAPgui how can we have come to know, system is installed on abap stack or dual stack.
Regards
K R Singh

Hello KR Singh,
the ways explained above are not sure shot ways to confirm if the system installed is single or dual stack.
HTTP Service can exist without J2EE as it did in older versions of SAP , same goes for the parameters (if they aren't configured properly).
The best way to check this is at the OS level.
Else you can do the following:
Check and validate the presence of J2EE schema in your database via transaction DB02
And combine this check with checking the presence of jlaunch and java processes in transaction ST06->Detailed Analysis->Top processes
Hope that helps.
Regards,
Siddhesh

Migrate dual stack to ABAP only

We have a dual-stack NW700.
We only want to export its ABAP portion and then use the export to build a new NW700 ABAP only.
1) is this feasible (i.e. the traget system will run? It's OK run without JAVA functionality as long as it runs)
2) if so, on sapinst , should select "system copy-> oracle->central system->system based on ABAP"
OR
"system copy-> oracle->central system->system based on ABAP + JAVA" ?
Thanks!

Hi Jessica,
You don't have to export the database.. Removing the java schema from the database is sufficient.
The installation guide explains how to remove a java add-in from a dual stack system.
Basically you do a drop user cascade from the java schema, remove the java software and delete the java specific parameters from the instance profile.
Kind regards,
Mark

DMVPN on Dual Stack Hub Site

Hi,
I have a Dual Stacked DMVPN Hub site, VPN for ether IPv4 oder IPv6 is working properly, but not both at the same time.
If the IPv4 Peers connect first, then the IPv6 Peers are unable to form an IPsec security association and the other way around. Crypto ISAKMP Phase1 is build correctly.
A "show crypto ipsec sa" on the Hub shows only sa's for the kind of Peers that connected first. A "show crypto ipsec sa" on the Spoke that is unable to form an security association with the Hub shows an security association, but with no proposals and raising send error counters:
Spoke (IPv4) SA
interface: Tunnel1
    Crypto map tag: My-Profile-v4-head-1, local addr 2.2.2.1
   protected vrf: (none)
   local ident (addr/mask/prot/port): (2.2.2.1/255.255.255.255/47/0)
   remote ident (addr/mask/prot/port): (1.1.1.1/255.255.255.255/47/0)
   current_peer 1.1.1.1 port 500
     PERMIT, flags={origin_is_acl,ipsec_sa_request_sent}
    #pkts encaps: 0, #pkts encrypt: 0, #pkts digest: 0
    #pkts decaps: 0, #pkts decrypt: 0, #pkts verify: 0
    #pkts compressed: 0, #pkts decompressed: 0
    #pkts not compressed: 0, #pkts compr. failed: 0
    #pkts not decompressed: 0, #pkts decompress failed: 0
    #send errors 23255, #recv errors 0
     local crypto endpt.: 2.2.2.1, remote crypto endpt.: 1.1.1.1
     plaintext mtu 1500, path mtu 1500, ip mtu 1500, ip mtu idb (none)
     current outbound spi: 0x0(0)
     PFS (Y/N): N, DH group: none
     inbound esp sas:
     inbound ah sas:
     inbound pcp sas:
     outbound esp sas:
     outbound ah sas:
     outbound pcp sas:
   protected vrf: (none)
I'm running IOS Version 15.3(2)T, is there some kind of known bug and/or a workaround for this?
Interface Configuration
interface GigabitEthernet0
description ** Outside **
ip address 1.1.1.1 255.255.255.0
duplex auto
speed auto
ipv6 address 2001:1:1:1::1/64
Crypto Configuration
crypto isakmp policy 10
encr aes 256
authentication pre-share
group 14
crypto isakmp key cisco address 0.0.0.0 no-xauth
crypto isakmp key cisco address ipv6 ::/0 no-xauth
crypto isakmp keepalive 10 periodic
crypto ipsec transform-set My-Set esp-aes 256 esp-sha512-hmac
mode tunnel
crypto ipsec profile My-Profile-v4
description ** IPsec Profile fuer IPv4 Peers **
set transform-set My-Set
set pfs group2
crypto ipsec profile My-Profile-v6
description ** IPsec Profile fuer IPv6 Peers **
set transform-set My-Set
set pfs group2
Tunnel Configuration
interface Tunnel1
description ** DMVPN Intranet IPv4 **
bandwidth 1000
ip vrf forwarding VPN
ip address 10.0.10.1 255.255.255.0
no ip redirects
ip mtu 1416
no ip next-hop-self eigrp 65351
no ip split-horizon eigrp 65351
ip pim sparse-mode
ip nhrp map multicast dynamic
ip nhrp network-id 1
ip nhrp holdtime 360
ip nhrp shortcut
ip nhrp redirect
ip tcp adjust-mss 1360
load-interval 30
shutdown
keepalive 10 3
tunnel source GigabitEthernet0
tunnel mode gre multipoint
tunnel key 1
tunnel protection ipsec profile My-Profile-v4 shared
interface Tunnel2
description ** DMVPN Intranet IPv6 **
bandwidth 1000
ip vrf forwarding VPN
ip address 10.0.12.1 255.255.255.0
ip mtu 1416
no ip next-hop-self eigrp 65351
no ip split-horizon eigrp 65351
ip pim sparse-mode
ip nhrp map multicast dynamic
ip nhrp network-id 2
ip nhrp holdtime 360
ip nhrp shortcut
ip nhrp redirect
ip tcp adjust-mss 1360
load-interval 30
keepalive 10 3
tunnel source GigabitEthernet0
tunnel mode gre multipoint ipv6
tunnel key 2
tunnel protection ipsec profile My-Profile-v6 shared
Regards,
Thomas

Hello Marcin,
it is working now :-)
First I was running a dual stacked spoke as well, but now I am using one IPv4 and one IPv6 only spoke. The ipsec profiles are "shared", because besides the two shown tunnels I have one more IPv4 and IPv6 Tunnel for Extranetuse. The Spoke sites use "shared" as well, because they build a backup VPN Tunnel to a second Hub router.
I have removed the "keepalive 10 3" from my Tunnel interfaces and rebooted the routers and everything is working now.
Here are my final configurations:
Crypto
crypto isakmp policy 10
encr aes 256
authentication pre-share
group 14
crypto isakmp key cisco address 0.0.0.0         no-xauth
crypto isakmp key cisco address ipv6 ::/0 no-xauth
crypto isakmp keepalive 10 periodic
crypto ipsec transform-set My-Set esp-aes 256 esp-sha512-hmac
mode tunnel
crypto ipsec profile My-Profile-v4
description ** IPsec Profile fuer IPv4 Peers **
set transform-set My-Set
set pfs group2
crypto ipsec profile My-Profile-v6
description ** IPsec Profile fuer IPv6 Peers **
set transform-set My-Set
set pfs group2
Tunnel Hub Dual Stacked
interface Tunnel1
description ** DMVPN Intranet IPv4 **
bandwidth 1000
ip vrf forwarding VPN
ip address 10.0.10.1 255.255.255.0
no ip redirects
ip mtu 1416
no ip next-hop-self eigrp 65351
no ip split-horizon eigrp 65351
ip pim sparse-mode
ip nhrp map multicast dynamic
ip nhrp network-id 1
ip nhrp holdtime 360
ip nhrp shortcut
ip nhrp redirect
ip tcp adjust-mss 1360
load-interval 30
tunnel source GigabitEthernet0
tunnel mode gre multipoint
tunnel key 1
tunnel protection ipsec profile My-Profile-v4 shared
interface Tunnel2
description ** DMVPN Intranet IPv6 **
bandwidth 1000
ip vrf forwarding VPN
ip address 10.0.12.1 255.255.255.0
ip mtu 1416
no ip next-hop-self eigrp 65351
no ip split-horizon eigrp 65351
ip pim sparse-mode
ip nhrp map multicast dynamic
ip nhrp network-id 2
ip nhrp holdtime 360
ip nhrp shortcut
ip nhrp redirect
ip tcp adjust-mss 1360
load-interval 30
tunnel source GigabitEthernet0
tunnel mode gre multipoint ipv6
tunnel key 2
tunnel protection ipsec profile My-Profile-v6 shared
end
Tunnel Spoke IPv4
interface Tunnel1
description ** DMVPN Intranet IPv4 **
ip vrf forwarding VPN
ip address 10.0.10.2 255.255.255.0
no ip redirects
ip mtu 1416
ip pim sparse-mode
ip nhrp map 10.0.10.1 1.1.1.1
ip nhrp map multicast 1.1.1.1
ip nhrp network-id 1
ip nhrp holdtime 360
ip nhrp nhs 10.0.10.1
ip nhrp shortcut
ip tcp adjust-mss 1360
delay 1000
tunnel source GigabitEthernet0
tunnel mode gre multipoint
tunnel key 1
tunnel protection ipsec profile My-Profile-v4 shared
end
Tunnel Spoke IPv6
interface Tunnel1
description ** DMVPN Intranet IPv6 **
ip vrf forwarding VPN
ip address 10.0.12.2 255.255.255.0
no ip redirects
ip mtu 1416
ip pim sparse-mode
ip nhrp map 10.0.12.1 2001:1:1:1::1
ip nhrp map multicast 2001:1:1:1::1
ip nhrp network-id 2
ip nhrp holdtime 360
ip nhrp nhs 10.0.12.1
ip nhrp shortcut
ip tcp adjust-mss 1360
delay 1000
tunnel source GigabitEthernet0
tunnel mode gre multipoint ipv6
tunnel key 2
tunnel protection ipsec profile My-Profile-v6 shared
end
Thanks again
Thomas

Parameterized Mapping - Binding Problem

Hi All,
I am using a parameterized mapping and i have given 2 import parameters in OM and also in Interface Determination. I am getting below error. anyone faced this problem before?
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="">
<SAP:Category>Application</SAP:Category>
<SAP:Code area="MAPPING">TX_MISSING_IDET_PROP</SAP:Code>
<SAP:P1>B113C2A0483E11E1C980A298F37B7F02</SAP:P1>
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>Parameter binding (ID = B113C2A0483E11E1C980A298F37B7F02) for interface determination is missing</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>

After creating binding variable in ESR, you have to create binding variable in the interface determination. The value you pass over there is saved in the created variable in operation mapping. Hope you understand.
Refer setting parameter values in interface determination portion of the link
SAP PI 7.1 Mapping Enhancements Series: Parameterized Message Mappings
Also activate and refresh cache. Sometime this might be due to caching problem and not properly set the parameter values.
Hope that helps.

Error in phase import Homogeneous system copy from a BI 7.3 dual stack ABAPJAVA

Hi
I'm doing a Homogeneous system copy from a BI 7.3 dual stack ABAP+JAVA system with an Oracle DB (11g version, 11.2.0.3.0 patch level) with AIX ibm OS.
Before starting export I've executed in the source system the report SMIGR_CREATE_DDL, as described in sap note 888210, and I generated *.SQL files.
After, during the import in the target system I get the following error message:
vi /expdb2/tmpDB0/sapinst_instdir/NW730/ORA/ORA/COPY/ORA/SYSTEM/STD/AS/import_monitor.log
INFO: 2014-03-08 00:21:57 com.sap.inst.migmon.LoadTask run_report
Monitor jobs: running 0, waiting 1, completed 60, failed 5, total 66 finish processing of package SAP0000
You can see below the detail of the 5 packages in error:
SAPAPPL0_1_5
DbSlExecute: rc = 99
(SQL error 2216)
error message returned by DbSl:
ORA-02216: tablespace name expected
(DB) INFO: disconnected from DB
/usr/sap/DB2/SYS/exe/uc/rs6000_64/R3load: job finished with 1 error(s)
/usr/sap/DB2/SYS/exe/uc/rs6000_64/R3load: END OF LOG: 20140307141347
SAPZPSA
DbSlExecute: rc = 99
(SQL error 2216)
error message returned by DbSl:
ORA-02216: tablespace name expected
(DB) INFO: disconnected from DB
SAPDODS
DbSlExecute: rc = 99
(SQL error 922)
error message returned by DbSl:
ORA-00922: missing or invalid option
(DB) INFO: disconnected from DB
SAPDFACT
DbSl Trace: Error 1741 in exec_immediate() from oci_execute_stmt(), orpc=0
DbSl Trace: ORA-01741 occurred when executing SQL stmt (parse error offset=8126464)
(DB) ERROR: DDL statement failed
( ALTER TABLE "/BI0/F0TCT_C01"    ADD PARTITION "/BI0/F0TCT_C010000001131" VALUES LESS THAN ( 0000001131 )    TABLESPACE "" )
DbSlExecute: rc = 99
(SQL error 1741)
error message returned by DbSl:
ORA-01741: illegal zero-length identifier
(DB) INFO: disconnected from DB
SAPZOSO
DbSl Trace: Error 922 in exec_immediate() from oci_execute_stmt(), orpc=0
DbSl Trace: ORA-00922 occurred when executing SQL stmt (parse error offset=242024448)
(DB) ERROR: DDL statement failed
(CREATE TABLE "/BIC/B0000989000"    ("REQUEST" VARCHAR2 (000090)      DEFAULT ' ' NOT NULL,    "DATAPAKID" VARCHAR2 (000018)      DEFAULT '000000' NOT NULL,    "PART
NO" NUMBER (000010)      DEFAULT 0 NOT NULL,    "RECORD" NUMBER (000010)      DEFAULT 0 NOT NULL,    "PLANT" VARCHAR2 (000012)      DEFAULT ' ' NOT NULL,    "MATERIA
L" VARCHAR2 (000054)      DEFAULT ' ' NOT NULL,    "RPA_CURUOM" VARCHAR2 (000015)      DEFAULT ' ' NOT NULL,    "RPA_MVF" NUMBER (000017, 000002)      DEFAULT 0 NOT N
ULL,    "PRICE_UNIT" NUMBER (000017, 000003)      DEFAULT 0 NOT NULL,    "RPA_QTYUOM" VARCHAR2 (000009)      DEFAULT ' ' NOT NULL,    "RT_SSMFGR" VARCHAR2 (000024)
    DEFAULT '00000000' NOT NULL,    "BASE_UOM" VARCHAR2 (000009)      DEFAULT ' ' NOT NULL,    "FRE_PLNPUR" VARCHAR2 (000036)      DEFAULT ' ' NOT NULL,    "FRE_MINS
TK" NUMBER (000017, 000003)      DEFAULT 0 NOT NULL,    "FRE_SERLEV" NUMBER (000017, 000003)      DEFAULT 0 NOT NULL,    "FRE_SELCLS" VARCHAR2 (000003)      DEFAULT '
0' NOT NULL,    "FRE_REPLST" VARCHAR2 (000006)      DEFAULT ' ' NOT NULL,    "ABCKEY" VARCHAR2 (000003)      DEFAULT ' ' NOT NULL,    "RECORDMODE" VARCHAR2 (000003)
    DEFAULT ' ' NOT NULL,    "RT_SERVLEV" VARCHAR2 (000003)      DEFAULT ' ' NOT NULL,    "RT_SUPS" VARCHAR2 (000003)      DEFAULT ' ' NOT NULL,    "VAL_TYPE" VARCH
AR2 (000030)      DEFAULT ' ' NOT NULL,    "PUR_GROUP" VARCHAR2 (000009)      DEFAULT ' ' NOT NULL,    "RT_VPNEU" NUMBER (000017, 000002)      DEFAULT 0 NOT NULL,
"CURRENCY" VARCHAR2 (000015)      DEFAULT ' ' NOT NULL,    "RT_VRKPE" NUMBER (000017, 000003)      DEFAULT 0 NOT NULL,    "DISMM" VARCHAR2 (000006)      DEFAULT ' '
NOT NULL,    "SALES_UNIT" VARCHAR2 (000009)      DEFAULT ' ' NOT NULL,    "RT_VP_BT" NUMBER (000017, 000002)      DEFAULT 0 NOT NULL,    "RT_VPE_BT" NUMBER (000017,
000003)      DEFAULT 0 NOT NULL,    "RT_VP_NT" NUMBER (000017, 000002)      DEFAULT 0 NOT NULL,    "RT_VPE_NT" NUMBER (000017, 000003)      DEFAULT 0 NOT NULL,    "R
T_VWAERBT" VARCHAR2 (000015)      DEFAULT ' ' NOT NULL,    "RT_VWAERNT" VARCHAR2 (000015)      DEFAULT ' ' NOT NULL,    "RT_VPMEIBT" VARCHAR2 (000009)      DEFAULT '
' NOT NULL,    "RT_VPMEINT" VARCHAR2 (000009)      DEFAULT ' ' NOT NULL,    "LOC_CURRCY" VARCHAR2 (000015)      DEFAULT ' ' NOT NULL,    "UNIT" VARCHAR2 (000009)
DEFAULT ' ' NOT NULL,    "CM_MCATDIV" VARCHAR2 (000054)      DEFAULT ' ' NOT NULL,    "CM_CDT1" VARCHAR2 (000054)      DEFAULT ' ' NOT NULL,    "CM_CDT2" VARCHAR2
(000054)      DEFAULT ' ' NOT NULL,    "CM_CDT3" VARCHAR2 (000054)      DEFAULT ' ' NOT NULL,    "CM_CDT4" VARCHAR2 (000054)      DEFAULT ' ' NOT NULL,    "CM_HIEID"
VARCHAR2 (000006)      DEFAULT ' ' NOT NULL,    "CPSTLC" NUMBER (000017, 000002)      DEFAULT 0 NOT NULL,    "CPSVLC" NUMBER (000017, 000002)      DEFAULT 0 NOT NULL
,    "STOCK_VAL" NUMBER (000017, 000002)      DEFAULT 0 NOT NULL,    "STOCK_QTY" NUMBER (000017, 000003)      DEFAULT 0 NOT NULL,    "RT_SEASON" VARCHAR2 (000012)
DEFAULT ' ' NOT NULL,    "RT_SEASYR" VARCHAR2 (000012)      DEFAULT '0000' NOT NULL,    "CALDAY" VARCHAR2 (000024)      DEFAULT '00000000' NOT NULL,    "CALWEEK"
VARCHAR2 (000018)      DEFAULT '000000' NOT NULL,    "RF_BNDID" VARCHAR2 (000012)      DEFAULT ' ' NOT NULL,    "/BIC/ZCATTR3" VARCHAR2 (000006)      DEFAULT ' ' NOT
NULL,    "/BIC/ZCSTYLE" VARCHAR2 (000006)      DEFAULT ' ' NOT NULL,    "/BIC/ZCIMAGE" VARCHAR2 (000006)      DEFAULT ' ' NOT NULL,    "/BIC/ZCBRNDTYP" VARCHAR2 (000
003)      DEFAULT ' ' NOT NULL,    "/BIC/ZCGROUPE" VARCHAR2 (000054)      DEFAULT ' ' NOT NULL)    PCTFREE 10    PCTUSED 00    INITRANS 001    TABLESPACE    STORAGE (
INITIAL    0000000016 K            NEXT        0000001024 K            MINEXTENTS 0000000001            MAXEXTENTS 2147483645            PCTINCREASE 0000
    FREELISTS 001            FREELIST GROUPS 01)      PARTITION BY RANGE ("PARTNO")      (      PARTITION "/BIC/B00009890000000000002" VALUES LESS THAN      (00000
00002)      NOCOMPRESS      ) )
DbSlExecute: rc = 99
(SQL error 922)
error message returned by DbSl:
ORA-00922: missing or invalid option
(DB) INFO: disconnected from DB

hello,
Before anything update DB shared lib, R3load, R3ldctl and R3szchk in the target system. Also Check in source system if you have any tables o index missing in db02 transaction, If this system wa upgraded from a previous release please check TAORA and IAORA tables in source system and check all the tablespaces named in those tables are created in the target system.
let me know how it goes.
Regards,
Michael

Parameterized mapping in PI 7.31 Dual Stack

Similar Messages

Maybe you are looking for